The recent cleanup in ALSA control core made no difference between
snd_ctl_find_id_mixer() and snd_ctl_find_id_mixer_locked(), and the
latter is to be dropped. The only user of the left API was ASoC, and
that's snd_soc_card_get_kcontrol_locked() and
snd_soc_component_get_kcontrol_locked().
This patch drops those functions and rewrites those users to call the
variant without locked instead. The test of the API became
superfluous, hence dropped as well.
As all callers of snd_ctl_find_id_mixer_locked() are gone,
snd_ctl_find_id_mixer_locked() is finally dropped, too.
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240809104234.8488-4-tiwai@suse.de
snd_soc_card_get_kcontrol() must be holding a read lock on
card->controls_rwsem while walking the controls list.
Compare with snd_ctl_find_numid().
The existing function is renamed snd_soc_card_get_kcontrol_locked()
so that it can be called from contexts that are already holding
card->controls_rwsem (for example, control get/put functions).
There are few direct or indirect callers of
snd_soc_card_get_kcontrol(), and most are safe. Three require
changes, which have been included in this patch:
codecs/cs35l45.c:
cs35l45_activate_ctl() is called from a control put() function so
is changed to call snd_soc_card_get_kcontrol_locked().
codecs/cs35l56.c:
cs35l56_sync_asp1_mixer_widgets_with_firmware() is called from
control get()/put() functions so is changed to call
snd_soc_card_get_kcontrol_locked().
fsl/fsl_xcvr.c:
fsl_xcvr_activate_ctl() is called from three places, one of which
already holds card->controls_rwsem:
1. fsl_xcvr_mode_put(), a control put function, which will
already be holding card->controls_rwsem.
2. fsl_xcvr_startup(), a DAI startup function.
3. fsl_xcvr_shutdown(), a DAI shutdown function.
To fix this, fsl_xcvr_activate_ctl() has been changed to call
snd_soc_card_get_kcontrol_locked() so that it is safe to call
directly from fsl_xcvr_mode_put().
The fsl_xcvr_startup() and fsl_xcvr_shutdown() functions have been
changed to take a read lock on card->controls_rsem() around calls
to fsl_xcvr_activate_ctl(). While this is not very elegant, it
keeps the change small, to avoid this patch creating a large
collateral churn in fsl/fsl_xcvr.c.
Analysis of other callers of snd_soc_card_get_kcontrol() is that
they do not need any changes, they are not holding card->controls_rwsem
when they call snd_soc_card_get_kcontrol().
Direct callers of snd_soc_card_get_kcontrol():
fsl/fsl_spdif.c: fsl_spdif_dai_probe() - DAI probe function
fsl/fsl_micfil.c: voice_detected_fn() - IRQ handler
Indirect callers via soc_component_notify_control():
codecs/cs42l43: cs42l43_mic_shutter() - IRQ handler
codecs/cs42l43: cs42l43_spk_shutter() - IRQ handler
codecs/ak4118.c: ak4118_irq_handler() - IRQ handler
codecs/wm_adsp.c: wm_adsp_write_ctl() - not currently used
Indirect callers via snd_soc_limit_volume():
qcom/sc8280xp.c: sc8280xp_snd_init() - DAIlink init function
ti/rx51.c: rx51_aic34_init() - DAI init function
I don't have hardware to test the fsl/*, qcom/sc828xp.c, ti/rx51.c
and ak4118.c changes.
Backport note:
The fsl/, qcom/, cs35l45, cs35l56 and cs42l43 callers were added
since the Fixes commit so won't all be present on older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 209c6cdfd2 ("ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card")
Link: https://lore.kernel.org/r/20240221123710.690224-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Masks the "DSP Virtual Mailbox 2 write" interrupt when before
issuing the hibernate command to the DSP. The interrupt is
unmasked when exiting runtime suspend as it is required for
DSP operation.
Without this change the DSP fires an interrupt when hibernating
causing the system spin between runtime suspend and runtime
resume.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231206160318.1255034-4-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the SYSTEM_SLEEP_PM_OPS handlers to prevent handling an IRQ
when the system is in the middle of suspending or resuming.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231206160318.1255034-3-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of the recently introduced EXPORT_GPL_DEV_PM_OPS() macro, to
conditionally export the runtime/system PM functions.
Replace the old SET_{RUNTIME,SYSTEM_SLEEP,NOIRQ_SYSTEM_SLEEP}_PM_OPS()
helpers with their modern alternatives and get rid of the now
unnecessary '__maybe_unused' annotations on all PM functions.
Additionally, use the pm_ptr() macro to fix the following errors when
building with CONFIG_PM disabled:
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231206160318.1255034-2-rriveram@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "AMP Enable Switch" is useful in systems with multiple
amplifiers connected to the same audio bus
but not all of them are needed for all use cases.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-4-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Link VMON, IMON, TEMPMON, VDD_BSTMON and VDD_BATTMON
to DSP1. The CSPL firmware uses them for the speaker calibration
and monitoring.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-3-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Adds "Analog PCM Volume" control with supported values
0 = 10dB,1 = 13dB,2 = 16dB and 3 = 19dB.
The amplifier can operate either in Speaker Mode or Receiver Mode
as configured by the user. Speaker Mode has four gain options
to support maximum amplifier output amplitude for loud
speaker application. Receiver Mode has further optimized
noise performance while maintaining sufficient output to support
phone receiver application. While configured in Receiver Mode,
the analog PCM Volume control is disabled and
the analog gain is fixed to 1dB.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-2-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Checks the index computed by the virq offset before printing the
error condition in cs35l45_spk_safe_err() handler.
Signed-off-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Acked-by: Ricardo Rivera-Matos <rriveram@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230831162042.471801-1-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename control to "DACPCM Source" for backward compatibility
with previous implementation.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com
Link: https://lore.kernel.org/r/20230828170525.335671-5-vkarpovi@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org
Adds support for a low-power Hibernation State.
Add support for a low-power hibernation state for the DSP. In
this state the DSP RAM contents are maintained, such that
firmware does not need to be re-downloaded, but the rest of the
chip's register state is lost.
Entry to this state is achieved via the register interface
(either by an external driver using the control port, or the
programmable DSP). Exit from this state is triggered by activity
on device GPIO pins, intended SPI transaction, or I2C
transaction with intended slave address.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167933511185.26.10641185496218226278@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L45 digital core incorporates one programmable DSP block,
capable of running a wide range of audio enhancement and speaker
and battery protection functions.
Signed-off-by: Vlad Karpovich <vkarpovi@opensource.cirrus.com>
Link: https://lore.kernel.org/r/167933510679.26.5992985447093367768@mailman-core.alsa-project.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The endianness flag is used on the CODEC side to specify an
ambivalence to endian, typically because it is lost over the hardware
link. This device receives audio over an I2S DAI and as such should
have endianness applied.
Fixes: 0d463d0160 ("ASoC: cs35l45: Add driver for Cirrus Logic CS35L45 Smart Amp")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220614131022.778057-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs35l45_remove() always returns zero. Make it return no value which
makes it easier to see in the callers that there is no error to handle.
Also the return value of i2c driver remove callbacks is ignored anyway.
This prepares making i2c remove callbacks return void, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220520173349.774366-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not disable the boost converter during probe. The silicon
contains functional default tunings so the boost converter can
be left at the chip default enabled state.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220504134458.283780-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The CS35L45 is a 15 V Boosted Mono Class D Amplifier with DSP
Speaker Protection and Adaptive Battery Management.
This initial driver provides standard non-boosted audio operation
without the DSP.
Signed-off-by: James Schulman <james.schulman@cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220405135419.1230088-6-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
