Positivo K116J is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250707114537.8291-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We will copy calibration data from position behind to front.
We have created a variable (tmp_val) point on top of calibration data
buffer, and tmp_val[1] is max of node number in original calibration
data structure, it will be overwritten after first data copy,
so can't be used as max node number check in for loop.
So we create a new variable to save max of node number (tmp_val[1]),
used to check if max node number was reached in for loop.
And a point need to be increased to point at calibration data in node.
Data saved position also need to be increased one byte.
Fixes: 4fe2385134 ("ALSA: hda/tas2781: Move and unified the calibrated-data getting function for SPI and I2C into the tas2781_hda lib")
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20250707090513.1462-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
An update for the MAINTAINERS file, plus a number of small driver
specific fixes and device quirks.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhn7fgACgkQJNaLcl1U
h9ASmAf+J5Wo5QIvuO7FwvNZAId2f21FQSH2PuXC/Pq7RQz2t74u4WdTx19qCU7D
PbduQwzizElKiYHrtvNBGeOHk0LZer1yyI74G5ziRE8gPwQUFK2gKLqGE8dbGhZp
0YjXMK4Yps0br+zJt5UC6zAzPIddYcv43VHb/YJr0dFV3G3vjHQbvyrHHVCgla/u
r1wCdHLqXsHF85OSoc/BIVSwgaDEztAs1bq4jXBw8upVbc0nmi8glJ7gYaRB4Ggv
U5llRHFOgCRWor4yNBXCF8Os9m90khk1/DQqdVBMsXX4R2npbnmPhIu73NarQ49/
F6mTSK4f7jfGBGxpZR16kPHkiwi2fQ==
=ConA
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.16-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
An update for the MAINTAINERS file, plus a number of small driver
specific fixes and device quirks.
Return an error from driver probe if the DEVID read from the chip is not
one supported by this driver.
In cs35l56_hw_init() there is a check for valid DEVID, but the invalid
case was returning the value of ret. At this point in the code ret == 0
so the caller would think that cs35l56_hw_init() was successful.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 84851aa055 ("ASoC: cs35l56: Move part of cs35l56_init() to shared library")
Link: https://patch.msgid.link/20250703102521.54204-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
These Lenovo Laptops have the DMICs connected to the host instead of the
CS42L43 and so need the SOC_SDW_CODEC_MIC quirk.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20250702112235.377479-1-simont@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously we were filtering out only upper unsupported sampling rates.
This patch adds filtering of the lower unsupported sampling rates. As a
result there is 1:1 mapping between altsetting and supported rates.
The issue was found on a Scarlett 3rd Gen card (see linked bug), but the
same filtering is likely needed for the Scarlett 1st and 2nd Gen as well
as the older Clarett cards which lacks Valid Alternate Setting Control.
Patch was not tested on a real hardware.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214493
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://patch.msgid.link/20250630013357.1327420-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Matches should go from more specific to less specific, correct the
ordering of two cs42l43 entries.
Fixes: c052406765 ("ASoC: Intel: soc-acpi: arl: Add match entries for new cs42l43 laptops")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20250626141841.77780-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On an imx8mm platform with an external clock provider, when running the
receiver (arecord) and triggering an xrun with xrun_injection, we see a
channel swap/offset. This happens sometimes when running only the
receiver, but occurs reliably if a transmitter (aplay) is also
concurrently running.
It seems that the SAI loses track of frame sync during the trigger stop
-> trigger start cycle that occurs during an xrun. Doing just a FIFO
reset in this case does not suffice, and only a software reset seems to
get it back on track.
This looks like the same h/w bug that is already handled for the
producer case, so we now do the reset unconditionally on config disable.
Signed-off-by: Arun Raghavan <arun@asymptotic.io>
Reported-by: Pieterjan Camerlynck <p.camerlynck@televic.com>
Fixes: 3e3f8bd569 ("ASoC: fsl_sai: fix no frame clk in master mode")
Cc: stable@vger.kernel.org
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://patch.msgid.link/20250626130858.163825-1-arun@arunraghavan.net
Signed-off-by: Mark Brown <broonie@kernel.org>
The helpers that are provided by SND_SOC_ACPI_INTEL_MATCH
(soc-acpi-intel-ssp-common) are used in SND_SOC_INTEL_SOF_BOARD_HELPERS
(sof_board_helpers).
SND_SOC_ACPI_INTEL_MATCH is selected by machine drivers. When
skl_hda_dsp_generic uses the board helpers, it select
SND_SOC_INTEL_SOF_BOARD_HELPERS only but not SND_SOC_ACPI_INTEL_MATCH
which initroduce the undefined symbol errors. However, it makes more
sense that SND_SOC_INTEL_SOF_BOARD_HELPERS select
SND_SOC_ACPI_INTEL_MATCH itself.
Fixes: b28b23dea3 ("ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506141543.dN0JJyZC-lkp@intel.com/
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Link: https://patch.msgid.link/20250626064420.450334-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When USRC=0, there is underrun issue for the non-ideal ratio mode;
according to the reference mannual, the internal measured ratio can be
used with USRC=1 and IDRC=0.
Fixes: d0250cf4f2 ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250625020504.2728161-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mute led on this laptop is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the device.
Tested on my friend's Victus 15-fb2xxx Laptop. The LED behaviour works
as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250627203415.56785-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add codec IDs for several NVIDIA products with HDA controllers to the
snd_hda_id_hdmi[] patch table.
Signed-off-by: Daniel Dadap <ddadap@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/aF24rqwMKFWoHu12@ddadap-lakeline.nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The built-in mic of ASUS VivoBook X507UAR is broken recently by the fix
of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE is working
for addressing the regression, too.
Fixes: 3b4309546b ("ALSA: hda: Fix headset detection failure due to unstable sort")
Reported-by: Igor Tamara <igor.tamara@gmail.com>
Closes: https://bugs.debian.org/1108069
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Link: https://lore.kernel.org/CADdHDco7_o=4h_epjEAb92Dj-vUz_PoTC2-W9g5ncT2E0NzfeQ@mail.gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A small collection of fixes, the main one being a fix for resume from
hibernation on AMD systems, plus a few new quirk entries for AMD
systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhcREYACgkQJNaLcl1U
h9BAQgf/aFcfxXvHtTgX1B45bFC8KiztVWvpxRpdAAss+ugAt/zvaVnlt7xisgrV
m3+NNL4s0c7b4EGpb3oyNkW6CyYQepusXaBqmoJtzFVPVE6Z3PvD1yDtEB8HuOiX
tceZGjuBZ6lDY8kMKgWjBkORuMJ/n4IikV//Gj28FXn6WB2l/3/S0R2sNWwbPoH8
61Y9mLnPiBX633BpjTtBzriv0ePZ/+k+19RXGqQ4cy2ZnGgMRI/oBJua+DcCdB9I
ZKQXrTDUJ5y+645ImMGFKyj9qDeC3xhwlk9DMpqiMBNEpS+rKCrXQchwUBFtr2NP
GIZfjqXNXa3Z1cLItv2zmJ7vkuhGqw==
=v8PL
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.16-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A small collection of fixes, the main one being a fix for resume from
hibernation on AMD systems, plus a few new quirk entries for AMD
systems.
The find_substream() call may return NULL, but the error path
dereferenced 'subs' unconditionally via dev_err(&subs->dev->dev, ...),
causing a NULL pointer dereference when subs is NULL.
Fix by switching to &uadev[idx].udev->dev which is always valid
in this context.
Signed-off-by: Pei Xiao <xiaopei01@kylinos.cn>
Link: https://patch.msgid.link/86ac2939273ac853535049e60391c09d7688714e.1750755508.git.xiaopei01@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix the boost gain calculation error in rt721_sdca_set_gain_get.
This patch is specific for "FU33 Boost Volume".
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/1b18fcde41c64d6fa85451d523c0434a@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASUS UM5606* models use the quirk to set up the bass speakers, but it
missed the mic-mute LED configuration. Other similar models have the
AMD ACP dmic, and the mic-mute is set up for that, but those models
don't have AMD ACP but rather built-in mics of Realtek codec, hence
the Realtek driver should set it up, instead.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220125
Link: https://patch.msgid.link/20250623151841.28810-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In snd_usb_get_audioformat_uac3(), the length value returned from
snd_usb_ctl_msg() is used directly for memory allocation without
validation. This length is controlled by the USB device.
The allocated buffer is cast to a uac3_cluster_header_descriptor
and its fields are accessed without verifying that the buffer
is large enough. If the device returns a smaller than expected
length, this leads to an out-of-bounds read.
Add a length check to ensure the buffer is large enough for
uac3_cluster_header_descriptor.
Signed-off-by: Youngjun Lee <yjjuny.lee@samsung.com>
Fixes: 9a2fe9b801 ("ALSA: usb: initial USB Audio Device Class 3.0 support")
Link: https://patch.msgid.link/20250623-uac3-oob-fix-v1-1-527303eaf40a@samsung.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP EliteBook 6 G1a laptops use ALC236 codec and need the fixup
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF to make the mic/micmute LEDs
work.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Link: https://patch.msgid.link/20250623063023.374920-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
During the hibernate entry sequence, ACP registers will be reset to
default values and acp ip will be completely powered off including acp
SoundWire pads. During resume sequence, if acp SoundWire pad keeper enable
register is not restored along with pad pulldown control register value,
then SoundWire manager links won't be powered on correctly results in
peripheral register access failures and completely audio function is
broken.
Add code to store the acp SoundWire pad keeper enable register and acp pad
pulldown ctrl register values before entering into suspend state and
restore the register values during resume sequence based on condition check
for acp SoundWire pad keeper enable register for ACP6.3, ACP7.0 & ACP7.1
platforms.
Fixes: 4916283880 ("ASoC: amd: ps: add callback functions for acp pci driver pm ops")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250623084630.3100279-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds DMI-based quirk for the Acer Nitro ANV15-41,
allowing the internal microphone to be detected correctly on
machines with "RB" as board vendor.
Signed-off-by: Yuzuru <yuzuru_10@proton.me>
Link: https://patch.msgid.link/20250622225754.20856-1-yuzuru_10@proton.me
Signed-off-by: Mark Brown <broonie@kernel.org>
With CONFIG_SND_SOC_SM8250=y and CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS=m
selected in kconfig, the build will fail due to trying to link against a
symbol only found in the module.
aarch64-linux-gnu-ld: sound/soc/qcom/sm8250.o: in function `sm8250_snd_exit':
sound/soc/qcom/sm8250.c:52:(.text+0x210): undefined reference to `qcom_snd_usb_offload_jack_remove'
Fix this by declaring the dependency that forces CONFIG_SND_SOC_SM8250=m
when CONFIG_SND_SOC_QCOM_OFFLOAD_UTILS is =m.
Reported-by: Matthew Croughan <matthew.croughan@nix.how>
Fixes: 1b8d0d87b9 ("ASoC: qcom: qdsp6: Add headphone jack for offload connection status")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://patch.msgid.link/20250617-snd-sm8250-dep-fix-v1-1-879af8906ec4@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP Pavilion Laptop 15-eg100 has Realtek HDA codec ALC287.
It needs the ALC287_FIXUP_HP_GPIO_LED quirk to enable the mute LED.
Signed-off-by: Yasmin Fitzgerald <sunoflife1.git@gmail.com>
Link: https://patch.msgid.link/20250621053832.52950-1-sunoflife1.git@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Positivo P15X is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250619191215.17203-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A relatively large collection of fixes and updates that came in since
the merge window. Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmhUnx0ACgkQJNaLcl1U
h9DKOAf/a73xsodyviWnmovKP9wMXbgQB0u7ubMDdkJm7HX91UEfIeh2kmfRhJtL
Hc/C0gHjOK15s+TgFR4zuO5Oeb63Ok+nY+YF7TlFQ0OPR/BvAIALpQUwlW/EgVgC
l+O9HJBysjNBtVf2aQTRvbs59kpoV1q31Ys5pGRN0nrUAvnrtosMtO3Py8UyS4Oy
4XcMUxnu67+8LVinOXV2X8lmztCm2dsX2Z9pnsxvncCFkxWJpDcr0EhUo24LOR1E
vDl7rAuI6fetUU8kHM7Noe7nyxa/4yiL6i5W/LWAfpCZiBkEdNU4WOVPRjBqXcY2
GfRYJkEbi7JoWWhMhdmLxYnobFKCiA==
=RZgv
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.16-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large collection of fixes and updates that came in since
the merge window. Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.
It is better to print out the non supported num_dmics than printing that
it is not matching with 2 or 4.
Fixes: 2fbeff3338 ("ASoC: Intel: add sof_sdw_get_tplg_files ops")
Cc: stable@vger.kernel.org
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://patch.msgid.link/20250619104705.26057-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the DSP core from i.MX8QM/i.MX8QXP is able to operate while the
firmware image is being loaded. Because of this, the DSP may change the
content of the firmware data just after it was loaded, thus leading to the
data having unexpected values when the DSP is reset (via run()).
Fix this by implementing the core_shutdown() operation that will put the
DSP in stall during suspend(). The stall will be removed during the run()
opertion, thus guaranteeing that the DSP core will not be able to run
while the firmware image is being loaded.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Link: https://patch.msgid.link/20250613194310.1128733-1-laurentiumihalcea111@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Like many Dell laptops, the 3.5mm port by default can not detect a
combined headphones+mic headset or even a pure microphone. This
change enables the port's functionality.
Signed-off-by: Jonathan Lane <jon@borg.moe>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250611193124.26141-2-jon@borg.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
Change the firmware filename format on SoundWire systems to
directly tie it to the physical amp it applies to. This is mainly
to decouple it from the ALSA prefix strings to avoid complications
when the SoundWire machine driver starts creating dailinks based on
SDCA Disco info instead of hardcoded match tables. It also avoids
errors from having to rename firmware files from a hardware-address
to a ALSA-prefix naming for Linux publication. There are already
published firmware files for the L56 B0 silicon so that has a fallback
scheme for backward compatibility which has been separated into its
own patch on top of the main change.
We'd like to get this into 6.16 so that the L63 support starts "clean"
with this new naming and we don't have to support one kernel version
with L63 using the old naming. Unfortunately we didn't manage to get
these patches through internal review and testing before the merge
window opened.
When the first driver for Apple Silicon was upstreamed we accidentally
included `default ARCH_APPLE` in its Kconfig which then spread to almost
every subsequent driver. As soon as ARCH_APPLE is set to y this will
pull in many drivers as built-ins which is not what we want.
Thus, drop `default ARCH_APPLE` from Kconfig.
Signed-off-by: Sven Peter <sven@kernel.org>
Reviewed-by: Janne Grunau <j@jannau.net>
Link: https://patch.msgid.link/20250612-apple-kconfig-defconfig-v1-10-0e6f9cb512c1@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
PCM1 not in Pulseaudio's control list; standardize control to
"Speaker" and "Headphone".
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250613063636.239683-1-wangdich9700@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
MSI Bravo 17 (D7VF), like other laptops from the family,
has broken ACPI tables and needs a quirk for internal mic
to work properly.
Signed-off-by: Gabriel Santese <santesegabriel@gmail.com>
Link: https://patch.msgid.link/20250530005444.23398-1-santesegabriel@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L56 B0 if .bin files are not found with the older
suffix. Some changes in wm_adsp needed to support this have been included
in this patch because they are trivial.
The allows future products with CS35L56 B0 silicon to use the same firmware
file naming as CS35L57 and cs35L63, while retaining backward compatibility
for firmware that has already been published with the old naming scheme.
The old suffix is searched first, partly because there are already many
files using that naming scheme, but also because they are a smaller subset
of all the possible fallback name options offered by wm_adsp so we know
that it will either find the qualified files or fail. All the firmware
files already published have the wmfw qualified with only the ACPI SSID and
the bin files qualified with both SSID and the suffix.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by the
address pin on the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing a redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There are already many published firmware for CS35L56 B0 silicon so this
first looks for the original name suffix, to keep backward compatibility.
If this doesn't find .bin files it will switch to using the new name suffix
so that future products using CS35L56 B0 can start to use the new suffix.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the SoundWire link number and device unique ID as the firmware file
qualifier suffix on CS35L57, CS35L63 and revisions of CS35L56 after B0. The
change in wm_adsp needed to support this has been included in this patch
because it is fairly trivial.
Originally, the firmware file names indicated which amplifier instance they
were for by appending the ALSA prefix string. This is the standard ASoC way
of distinguishing different instances of the same device. However, on
SoundWire systems the SoundWire physical unique address is available as a
unique identifier for each amp, and this address is hardwired by a pin on
the amp.
The firmware files are specific for each physical amp so they must be
applied to that amp. Using the ALSA prefix for the filename qualifier means
that to name a firmware file it must be determined what prefix string the
machine driver will assign to each device and then use that to name the
firmware file correctly. This is straightforward in traditional ASoC
systems where the machine driver is specific to a particular piece of
hardware. But on SoundWire the machine driver is generic and can handle a
very wide range of hardware. It is more difficult to determine exactly what
the prefix will be on any particular production device, and more prone to
mistakes. Also, when the machine driver switches to generating this
automatically from SDCA properties in ACPI, there is an additional layer of
complexity in determining the mapping. This uncertainty is unnecessary
because the firmware is built for a specific amp. with known address, so we
can use that directly instead of introducing the redundant intermediate
alias. This ensures the firmware is applied to the amp it was intended for.
There have not been any firmwares published for CS35L57 or CS35L63, so
these can safely be switched to using the SoundWire unique address as the
suffix string. Also note that the machine driver in older kernel version
only has match entries for the CS35L56 Soundwire identity so any future
product with a cs35L57 or CS35L63 would require a new kernel anyway.
There are already many published firmware for CS35L56 B0 silicon so this
keeps the original naming scheme on those, to preserve backward
compatibility.
Note that although sdw_slave.id contains a unique_id field, this cannot
be trusted because the SoundWire core code also puts magic values into it
that it uses as a flag. So the unique ID is read from the chip register.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250612121428.1667-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the DMA mode is changed on the (still real!) SB AWE32 after
playing a stream and closing, the previous DMA setup was still
silently kept, and it can confuse the hardware, resulting in the
unexpected noises. As a workaround, enforce the disablement of DMA
setups when the DMA setup is changed by the kcontrol.
https://bugzilla.kernel.org/show_bug.cgi?id=218185
Link: https://patch.msgid.link/20250610064322.26787-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The GU605C has similar audio hardware to the GU605M so apply the
same quirk.
Note that in the linked bugzilla there are two separate problems
with the GU605C. This patch fixes one of the problems, so I haven't
added a Closes: tag.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Nick Karaolidis <nick@karaolidis.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=220152
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250609102125.63196-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The built-in mic of ASUS VivoBook X513EA is broken recently by the
fix of the pin sort. The fixup ALC256_FIXUP_ASUS_MIC_NO_PRESENCE
is working for addressing the regression, too.
Fixes: 3b4309546b ("ALSA: hda: Fix headset detection failure due to unstable sort")
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250610035607.690771-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mute led on those laptops is using ALC245 but requires a quirk to work
This patch enables the existing quirk for the devices.
Tested on my Victus 16-s1011nt Laptop and my friend's Victus
15-fa1xxx. The LED behaviour works as intended.
Cc: <stable@vger.kernel.org>
Signed-off-by: Edip Hazuri <edip@medip.dev>
Link: https://patch.msgid.link/20250609075943.13934-2-edip@medip.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
