The ieee80211_csa_finish() function currently uses for_each_sdata_link()
to iterate over links of sdata. However, this macro internally uses
wiphy_dereference(), which expects the wiphy->mtx lock to be held.
When ieee80211_csa_finish() is invoked under an RCU read-side critical
section (e.g., under rcu_read_lock()), this leads to a warning from the
RCU debugging framework.
WARNING: suspicious RCU usage
net/mac80211/cfg.c:3830 suspicious rcu_dereference_protected() usage!
This warning is triggered because wiphy_dereference() is not safe to use
without holding the wiphy mutex, and it is being used in an RCU context
without the required locking.
Fix this by introducing and using a new macro, for_each_sdata_link_rcu(),
which performs RCU-safe iteration over sdata links using
list_for_each_entry_rcu() and rcu_dereference(). This ensures that the
link pointers are accessed safely under RCU and eliminates the warning.
Fixes: f600832794 ("wifi: mac80211: restructure tx profile retrieval for MLO MBSSID")
Signed-off-by: Maharaja Kennadyrajan <maharaja.kennadyrajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250711033846.40455-1-maharaja.kennadyrajan@oss.qualcomm.com
[unindent like the non-RCU macro]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During commands like channel switch and color change, the updated
unsolicited broadcast probe response template may be provided. However,
this data is not parsed or acted upon in mac80211.
Add support to parse it and set the BSS changed flag
BSS_CHANGED_UNSOL_BCAST_PROBE_RESP so that drivers could take further
action.
Signed-off-by: Yuvarani V <quic_yuvarani@quicinc.com>
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Link: https://patch.msgid.link/20250710-update_unsol_bcast_probe_resp-v2-2-31aca39d3b30@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since there's no TPE element in the (re)assoc response, trying
to use the data from it just leads to using the defaults, even
though the real values had been set during authentication from
the discovered BSS information.
Fix this by simply not handling the TPE data in assoc response
since it's not intended to be present, if it changes later the
necessary changes will be made by tracking beacons later.
As a side effect, by passing the real frame subtype, now print
a correct value for ML reconfiguration responses.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.caa1ca853f5a.I588271f386731978163aa9d84ae75d6f79633e16@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If this action frame, with the value of IEEE80211_HT_CHANWIDTH_ANY,
arrives right after a beacon that changed the operational bandwidth from
20 MHz to 40 MHz, then updating the rate control bandwidth to 40 can
race with updating the chanctx width (that happens in the beacon
proccesing) back to 40 MHz:
cpu0 cpu1
ieee80211_rx_mgmt_beacon
ieee80211_config_bw
ieee80211_link_change_chanreq
(*)ieee80211_link_update_chanreq
ieee80211_rx_h_action
(**)ieee80211_sta_cur_vht_bw
(***) ieee80211_recalc_chanctx_chantype
in (**), the maximum between the capability width and the bss width is
returned. But the bss width was just updated to 40 in (*),
so the action frame handling code will increase the width of the rate
control before the chanctx was increased (in ***), leading to a FW error
(at least in iwlwifi driver. But this is wrong regardless).
Fix this by simply handling the action frame async, so it won't race
with the beacon proccessing.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218632
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.bb9dc6f36c35.I39782d6077424e075974c3bee4277761494a1527@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During resume, the driver can call ieee80211_add_gtk_rekey for keys that
are not programmed into the device, e.g. keys of inactive links.
Don't mark such a key as uploaded to avoid removing it later from the
driver/device.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.655094412b0b.Iacae31af3ba2a705da0a9baea976c2f799d65dc4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
At the end of reconfig we are activating all the links that were active
before the error.
During the activation, _ieee80211_link_use_channel will unassign and
re-assign the chanctx from/to the link.
But we only need to do the assign, as we are re-building the state as it
was before the reconfig.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.6245c3ae7031.Ia5f68992c7c112bea8a426c9339f50c88be3a9ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Under the previous commit's assumption that FIPS isn't
supported by hardware, we don't need to modify the
cipher suite list, but just need to use the software
one instead of the driver's in this case, so clean up
the code.
Also fix it to exclude TKIP in this case, since that's
also dependent on RC4.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.cff427e8f8a5.I744d1ea6a37e3ea55ae8bc3e770acee734eff268@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When fips_enabled is set, don't send any keys to the driver
(including possibly WoWLAN KEK/KCK material), assuming that
no device exists with the necessary certifications. If this
turns out to be false in the future, we can add a HW flag.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.e5eebc2b19d8.I968ef8c9ffb48d464ada78685bd25d22349fb063@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All the paths that could return an error are considered
misuses of the function and WARN already, and none of
the callers ever check the return value. Remove it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.5b436ee3c20c.Ieff61ec510939adb5fe6da4840557b649b3aa820@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a link has no chanctx, indicating it is an inactive link
that we tracked CSA for, then attempting to unreserve the
reserved chanctx will throw a warning and fail, since there
never was a reserved chanctx. Skip the unreserve.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233537.022192f4b1ae.Ib58156ac13e674a9f4d714735be0764a244c0aae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.16-rc6-2).
No conflicts.
Adjacent changes:
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c
c701574c54 ("wifi: mt76: mt7925: fix invalid array index in ssid assignment during hw scan")
b3a431fe2e ("wifi: mt76: mt7925: fix off by one in mt7925_mcu_hw_scan()")
drivers/net/wireless/mediatek/mt76/mt7996/mac.c
62da647a2b ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
dc66a129ad ("wifi: mt76: add a wrapper for wcid access with validation")
drivers/net/wireless/mediatek/mt76/mt7996/main.c
3dd6f67c66 ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl()")
8989d8e90f ("wifi: mt76: mt7996: Do not set wcid.sta to 1 in mt7996_mac_sta_event()")
net/mac80211/cfg.c
58fcb1b428 ("wifi: mac80211: reject VHT opmode for unsupported channel widths")
037dc18ac3 ("wifi: mac80211: add support for storing station S1G capabilities")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In reconfig we add the virtual monitor in 2 cases:
1. If we are resuming (it was deleted on suspend)
2. If it was added after an error but before the reconfig
(due to the last non-monitor interface removal).
In the second case, the removal of the non-monitor interface will succeed
but the addition of the virtual monitor will fail, so we add it in the
reconfig.
The problem is that we mislead the driver to think that this is an existing
interface that is getting re-added - while it is actually a completely new
interface from the drivers' point of view.
Some drivers act differently when a interface is re-added. For example, it
might not initialize things because they were already initialized.
Such drivers will - in this case - be left with a partialy initialized vif.
To fix it, add the virtual monitor after reconfig_complete, so the
driver will know that this is a completely new interface.
Fixes: 3c3e21e744 ("mac80211: destroy virtual monitor interface across suspend")
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233451.648d39b041e8.I2e37b68375278987e303d6c00cc5f3d8334d2f96@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is currently not initialized for a virtual monitor, leading to a
NULL pointer dereference when - for example - iterating over all the
keys of all the vifs.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250709233400.8dcefe578497.I4c90a00ae3256520e063199d7f6f2580d5451acf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When SAE commit is sent and received in response, there's no
ordering for the SAE confirm messages. As such, don't call
drivers to stop listening on the channel when the confirm
message is still expected.
This fixes an issue if the local confirm is transmitted later
than the AP's confirm, for iwlwifi (and possibly mt76) the
AP's confirm would then get lost since the device isn't on
the channel at the time the AP transmit the confirm.
For iwlwifi at least, this also improves the overall timing
of the authentication handshake (by about 15ms according to
the report), likely since the session protection won't be
aborted and rescheduled.
Note that even before this, mgd_complete_tx() wasn't always
called for each call to mgd_prepare_tx() (e.g. in the case
of WEP key shared authentication), and the current drivers
that have the complete callback don't seem to mind. Document
this as well though.
Reported-by: Jan Hendrik Farr <kernel@jfarr.cc>
Closes: https://lore.kernel.org/all/aB30Ea2kRG24LINR@archlinux/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.12691580e140.I3f1d3127acabcd58348a110ab11044213cf147d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement dot11ExtendedRegInfoSupport to advertise non-AP station
regulatory power capability as part of regulatory connectivity
element in (Re)Association request frames so that AP can achieve
maximum client connectivity. Control field which was interpreted
using value of 3-bits B5 to B3, now uses value of 4-bits B6 to B3 to
interpret the type of AP. Hence update IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO
to parse 4-bits control field. If older AP still updates only 3-bits
value of control field, station can still interpret the value as per
section E.2.7 of IEEE 802.11 REVme D7.0 and support the appropriate
AP type.
Also update IEEE80211_6GHZ_CTRL_REG_INDOOR_SP_AP as the value of
standard power AP is changed to 8 instead of 4 so that AP can support both
LPI AP and SP AP to maximize the connectivity with stations. For backward
compatibility, keeping value 4 as old AP by limiting it to SP AP only.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.90cdef116aad.I85da390fbee59355e3855691933e6a5e55c47ac4@changeid
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the code only sends extended MLD capa/ops in
strict mode, but if the AP has it then it should also
be able to parse it. There could be cases where the AP
doesn't have it but we would want to advertise it (e.g.
if the AP supports nothing but we want to have BTM.),
but given the broken deployed APs out there right now
this is the best we can do.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.c9b8b3a6ca77.I1153d4283d1fbb9e5db60e7b939cc133a6345db5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
cfg80211 now reports whether this is the first part of a scan. Copy
that information into the driver request.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213231.63f6078bd7be.Ia6e5cee945e6d9617c2f427552d89d23c92eee83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the link is deactivated and the CSA completes, then that
needs to update the link station's bandwidth (only the AP STA
can exist at this point, no TDLS on inactive links) and set
the CSA to no longer be active. Fix this.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213231.07f120cf687d.I5a868c501ee73fcc2355d61c2ee06e5f444b350f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a new station is added, ensure that mandatory bit-rates
are enabled for 6 GHz band.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213231.4aecd7f3b85b.I33a54872a3267c9f6155ce537d6c9c2a31c3f117@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_prep_connection is supposed to be called when both bitmaps
(valid_links and active_links) are cleared.
Make sure of it and WARN if this is not the case, to avoid weird issues.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250609213231.f616c7b693df.Ie983155627ad0d2e7c19c30ce642915246d0ed9d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The cleanup attribute runs kfree() when the variable goes out of scope.
There is a possibility that the link_elems variable is uninitialized
if the loop ends before an assignment is made to this variable.
This leads to uninitialized variable bug.
Fix this by assigning link_elems to NULL.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213231.eeacd3738a7b.I0f876fa1359daeec47ab3aef098255a9c23efd70@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we get to the error path of ieee80211_prep_connection, for example
because of a FW issue, then ieee80211_vif_set_links is called
with 0.
But the call to drv_change_vif_links from ieee80211_vif_update_links
will probably fail as well, for the same reason.
In this case, the valid_links and active_links bitmaps will be reverted
to the value of the failing connection.
Then, in the next connection, due to the logic of
ieee80211_set_vif_links_bitmaps, valid_links will be set to the ID of
the new connection assoc link, but the active_links will remain with the
ID of the old connection's assoc link.
If those IDs are different, we get into a weird state of valid_links and
active_links being different. One of the consequences of this state is
to call drv_change_vif_links with new_links as 0, since the & operation
between the bitmaps will be 0.
Since a removal of a link should always succeed, ignore the return value
of drv_change_vif_links if it was called to only remove links, which is
the case for the ieee80211_prep_connection's error path.
That way, the bitmaps will not be reverted to have the value from the
failing connection and will have 0, so the next connection will have a
good state.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250609213231.ba2011fb435f.Id87ff6dab5e1cf757b54094ac2d714c656165059@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, ieee80211_rx_data_set_sta() does not correctly handle the
case where the interface supports multiple links (MLO), but the station
does not (non-MLO). This can lead to incorrect link assignment or
unexpected warnings when accessing link information.
Hence, add a fix to check if the station lacks valid link support and
use its default link ID for rx->link assignment. If the station
unexpectedly has valid links, fall back to the default link.
This ensures correct link association and prevents potential issues
in mixed MLO/non-MLO environments.
Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250630084119.3583593-1-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
VHT operating mode notifications are not defined for channel widths
below 20 MHz. In particular, 5 MHz and 10 MHz are not valid under the
VHT specification and must be rejected.
Without this check, malformed notifications using these widths may
reach ieee80211_chan_width_to_rx_bw(), leading to a WARN_ON due to
invalid input. This issue was reported by syzbot.
Reject these unsupported widths early in sta_link_apply_parameters()
when opmode_notif is used. The accepted set includes 20, 40, 80, 160,
and 80+80 MHz, which are valid for VHT. While 320 MHz is not defined
for VHT, it is allowed to avoid rejecting HE or EHT clients that may
still send a VHT opmode notification.
Reported-by: syzbot+ededba317ddeca8b3f08@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ededba317ddeca8b3f08
Fixes: 751e7489c1 ("wifi: mac80211: expose ieee80211_chan_width_to_rx_bw() to drivers")
Tested-by: syzbot+ededba317ddeca8b3f08@syzkaller.appspotmail.com
Signed-off-by: Moon Hee Lee <moonhee.lee.ca@gmail.com>
Link: https://patch.msgid.link/20250703193756.46622-2-moonhee.lee.ca@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the non-transmitted BSSID profile is found, immediately return
from the search to not return the wrong profile_len when the profile
is found in a multiple BSSID element that isn't the last one in the
frame.
Fixes: 5023b14cf4 ("mac80211: support profile split between elements")
Reported-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20250630154501.f26cd45a0ecd.I28e0525d06e8a99e555707301bca29265cf20dc8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In disconnect paths paths, local frame buffers are used
to build deauthentication frames to send them over the
air and as notifications to userspace. Some internal
error paths (that, given no other bugs, cannot happen)
don't always initialize the buffers before sending them
to userspace, so in the presence of other bugs they can
leak stack content. Initialize the buffers to avoid the
possibility of this happening.
Suggested-by: Zhongqiu Han <quic_zhonhan@quicinc.com>
Link: https://patch.msgid.link/20250701072213.13004-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 identifies a short beacon by the presence of the next
TBTT field, however the standard actually doesn't explicitly state that
the next TBTT can't be in a long beacon or even that it is required in
a short beacon - and as a result this validation does not work for all
vendor implementations.
The standard explicitly states that an S1G long beacon shall contain
the S1G beacon compatibility element as the first element in a beacon
transmitted at a TBTT that is not a TSBTT (Target Short Beacon
Transmission Time) as per IEEE80211-2024 11.1.3.10.1. This is validated
by 9.3.4.3 Table 9-76 which states that the S1G beacon compatibility
element is only allowed in the full set and is not allowed in the
minimum set of elements permitted for use within short beacons.
Correctly identify short beacons by the lack of an S1G beacon
compatibility element as the first element in an S1G beacon frame.
Fixes: 9eaffe5078 ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Simon Wadsworth <simon@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250701075541.162619-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow an S1G station to use aggregation.
Signed-off-by: Sophronia Koilpillai <sophronia.koilpillai@morsemicro.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250617080610.756048-5-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for updating the stations S1G capabilities when
an S1G association occurs.
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250617080610.756048-3-lachlan.hodges@morsemicro.com
[remove unused S1G_CAP3_MAX_MPDU_LEN_3895/_7791]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support to get the radio for which RTS threshold needs to be changed
from userspace. Pass on this radio index to underlying drivers as an
additional argument.
A value of -1 indicates radio index is not mentioned and that the
configuration applies to all radio(s) of the wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-5-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <quic_rdevanat@quicinc.com>
Link: https://patch.msgid.link/20250615082312.619639-2-quic_rdevanat@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, link station statistics for MLO are filled by mac80211.
But there are some statistics that kept by mac80211 might not be
accurate, so let the driver pre-fill the link statistics. The driver
can fill the values (indicating which field is filled, by setting the
filled bitmapin in link_station structure).
Statistics that driver don't fill are filled by mac80211.
Hence, add link_sta_statistics callback to fill link station statistics
for MLO in sta_set_link_sinfo() by drivers.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-11-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, RX stats packets are incremented for deflink member for
non-ML and multi-link(ML) station case. However, for ML station,
packets should be incremented based on the specific link.
Therefore, if a valid link_id is present, fetch the corresponding
link station information and increment the RX packets for that link.
For non-MLO stations, the deflink will still be used.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-10-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, sinfo structure is supported to fill information at
deflink( or one of the links) level for station. This has problems
when applied to fetch multi-link(ML) station information.
Hence, if valid_links are present, support filling link_station
structure for each link.
This will be helpful to check the link related statistics during MLO.
Additionally, TXQ stats for pertid are applicable at station level
not at link level. Therefore check link_id is less then 0, before
filling TXQ stats in pertid stats.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-9-quic_sarishar@quicinc.com
[fix some indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, if a link gets removed in between for a station then
directly accumulated data will fall down to sum of other active links.
This will bring inconsistency in station dump statistics.
For instance, let's take Tx packets
- at t=0-> link-0:2 link-1:3 Tx packets => accumulated = 5
- at t=1-> link-0:4 link-1:6 Tx packets => accumulated = 10
let say at t=2, link-0 went down => link-0:0 link-1:7 => accumulated = 7
Here, suddenly accumulated Tx packets will come down to 7 from 10.
This is showing inconsistency.
Therefore, store link-0 data when it went down and add to accumulated
Tx packet = 11.
Hence, store the removed link statistics data in sta structure and
add it in accumulated statistics for consistency.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-7-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in supporting API's to fill sinfo structure from sta
structure, is mapped to fill the fields from sta->deflink. However,
for multi-link (ML) station, sinfo structure should be filled from
corresponding link_id.
Therefore, add link_id as an additional argument in supporting API's
for filling sinfo structure correctly. Link_id is set to -1 for non-ML
station and corresponding link_id for ML stations. In supporting API's
for filling sinfo structure, check for link_id, if link_id < 0, fill
the sinfo structure from sta->deflink, otherwise fill from
sta->link[link_id].
Current, changes are done at the deflink level i.e, pass -1 as link_id.
Actual link_id will be added in subsequent patches to support
station statistics for MLO.
Signed-off-by: Sarika Sharma <quic_sarishar@quicinc.com>
Link: https://patch.msgid.link/20250528054420.3050133-2-quic_sarishar@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, when a non-DFS channel is brought up and the bandwidth is
expanded from 80 MHz to 160 MHz, where the primary 80 MHz is non-DFS
and the secondary 80 MHz consists of DFS channels, radar detection
fails if radar occurs in the secondary 80 MHz.
When the channel is switched from 80 MHz to 160 MHz, with the primary
80 MHz being non-DFS and the secondary 80 MHz consisting of DFS
channels, the radar required flag in the channel switch parameters
is set to true. However, when using a reserved channel context,
it is not updated in sdata, which disables radar detection in the
secondary 80 MHz DFS channels.
Update the radar required flag in sdata to fix this issue when using
a reserved channel context.
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Ramasamy Kaliappan <ramasamy.kaliappan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250608140324.1687117-1-ramasamy.kaliappan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As we are converting from TU to usecs, a beacon interval of
100*1024 usecs will lead to integer wrapping. To fix change
to use a u32.
Fixes: 057d5f4ba1 ("mac80211: sync dtim_count to TSF")
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Link: https://patch.msgid.link/20250621123209.511796-1-lachlan.hodges@morsemicro.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in ieee80211_assign_beacon() mbssid count is updated as link's
bssid_indicator. mbssid count is the total number of MBSSID elements in
the beacon instead of Max BSSID indicator of the Multiple BSS set.
This will result in drivers obtaining an invalid bssid_indicator for BSSes
in a Multiple BSS set.
Fix this by updating link's bssid_indicator from MBSSID element for
Transmitting BSS and update the same for all of its Non-Transmitting BSSes.
Fixes: dde78aa520 ("mac80211: update bssid_indicator in ieee80211_assign_beacon")
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20250530040940.3188537-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in multi-radio wiphy cases, if one radio is operating on a DFS
channel, -EBUSY is returned even when a scan is requested on a different
radio. Because of this, an MLD AP with one radio (link) on a DFS channel
and Automatic Channel Selection (ACS) on another radio (link) cannot be
brought up.
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a radio is operating on a DFS channel and a scan is
requested on a different radio of the same wiphy, the scan can be allowed
simultaneously without impacting the DFS operations.
Add logic to check the underlying radio used for the requested scan. If the
radio on which DFS is already running is not being used, allow the scan
operation; otherwise, return -EBUSY.
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-3-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, in multi-radio wiphy cases, if a scan is ongoing on one radio,
-EBUSY is returned when DFS or a channel switch is initiated on another
radio. Because of this, an MLD AP with one radio (link) in an ongoing scan
cannot initiate DFS or a channel switch on another radio (link).
In multi-radio wiphy cases, multiple radios are grouped under a single
wiphy. Hence, if a scan is ongoing on one underlying radio and DFS or a
channel switch is requested on a different underlying radio of the same
wiphy, these operations can be allowed simultaneously.
Add logic to check the underlying radio used for the ongoing scan. If the
radio on which DFS or a channel switch is requested is not being used for
the scan, allow the operation; otherwise, return -EBUSY.
Signed-off-by: Aditya Kumar Singh <aditya.kumar.singh@oss.qualcomm.com>
Co-developed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Link: https://patch.msgid.link/20250527-mlo-dfs-acs-v2-2-92c2f37c81d9@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>