mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-04 20:19:47 +08:00
8b7ab8eb52
1356 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
![]() |
228b9deded |
PM: suspend: clean up redundant filesystems_freeze/thaw() handling
The recently introduced support for freezing filesystems during system
suspend included calls to filesystems_freeze() in both suspend_prepare()
and enter_state(), as well as calls to filesystems_thaw() in both
suspend_finish() and the Unlock path in enter_state(). These are
redundant.
Moreover, calling filesystems_freeze() twice, from both suspend_prepare()
and enter_state(), leads to a black screen and makes the system unable
to resume in some cases.
Address this as follows:
- filesystems_freeze() is already called in suspend_prepare(), which
is the proper and consistent place to handle pre-suspend operations.
The second call in enter_state() is unnecessary and so remove it.
- filesystems_thaw() is invoked in suspend_finish(), which covers
successful suspend/resume paths. In the failure case, add a call
to filesystems_thaw() only when needed, avoiding the duplicate call
in the general Unlock path.
This change simplifies the suspend code and avoids repeated freeze/thaw
calls, while preserving correct ordering and behavior.
Fixes:
|
||
![]() |
75b63ce2c9 |
PM: suspend: Drop a misplaced pm_restore_gfp_mask() call
The pm_restore_gfp_mask() call added by commit |
||
![]() |
12ffc3b151 |
PM: Restrict swap use to later in the suspend sequence
Currently swap is restricted before drivers have had a chance to do their prepare() PM callbacks. Restricting swap this early means that if a driver needs to evict some content from memory into sawp in it's prepare callback, it won't be able to. On AMD dGPUs this can lead to failed suspends under memory pressure situations as all VRAM must be evicted to system memory or swap. Move the swap restriction to right after all devices have had a chance to do the prepare() callback. If there is any problem with the sequence, restore swap in the appropriate dpm resume callbacks or error handling paths. Closes: https://github.com/ROCm/ROCK-Kernel-Driver/issues/174 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2362 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Nat Wittstock <nat@fardog.io> Tested-by: Lucian Langa <lucilanga@7pot.org> Link: https://patch.msgid.link/20250613214413.4127087-1-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
00c010e130 |
- The 11 patch series "Add folio_mk_pte()" from Matthew Wilcox
simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - The 3 patch series "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - The 2 patch series "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - The 8 patch series "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - The 2 patch series "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - The 3 patch series "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - The 12 patch series "Always call constructor for kernel page tables" from Kevin Brodsky "ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables". This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - The 9 patch series "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - The 3 patch series "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - The 6 patch series "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - The 3 patch series ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - The 2 patch series "vmscan: enforce mems_effective during demotion" from Gregory Price "changes reclaim to respect cpuset.mems_effective during demotion when possible". because "presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated." "This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently." - The 2 patch series ""Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - The 4 patch series "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - The 7 patch series "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - The 2 patch series "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - The 4 patch series "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - The 6 patch series "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - The 8 patch series "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - The 4 patch series "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - The 6 patch series "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is "yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents." - The 7 patch series "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - The 4 patch series "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x Qqb/UGMEpilyre1PayQqOnct3aSL9Ao= =tYYm -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of creating a pte which addresses the first page in a folio and reduces the amount of plumbing which architecture must implement to provide this. - "Misc folio patches for 6.16" from Matthew Wilcox is a shower of largely unrelated folio infrastructure changes which clean things up and better prepare us for future work. - "memory,x86,acpi: hotplug memory alignment advisement" from Gregory Price adds early-init code to prevent x86 from leaving physical memory unused when physical address regions are not aligned to memory block size. - "mm/compaction: allow more aggressive proactive compaction" from Michal Clapinski provides some tuning of the (sadly, hard-coded (more sadly, not auto-tuned)) thresholds for our invokation of proactive compaction. In a simple test case, the reduction of a guest VM's memory consumption was dramatic. - "Minor cleanups and improvements to swap freeing code" from Kemeng Shi provides some code cleaups and a small efficiency improvement to this part of our swap handling code. - "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin adds the ability for a ptracer to modify syscalls arguments. At this time we can alter only "system call information that are used by strace system call tampering, namely, syscall number, syscall arguments, and syscall return value. This series should have been incorporated into mm.git's "non-MM" branch, but I goofed. - "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more efficiently get at the info about guard regions. - "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan implements that fix. No runtime effect is expected because validate_page_before_insert() happens to fix up this error. - "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David Hildenbrand basically brings uprobe text poking into the current decade. Remove a bunch of hand-rolled implementation in favor of using more current facilities. - "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman Khandual provides enhancements and generalizations to the pte dumping code. This might be needed when 128-bit Page Table Descriptors are enabled for ARM. - "Always call constructor for kernel page tables" from Kevin Brodsky ensures that the ctor/dtor is always called for kernel pgtables, as it already is for user pgtables. This permits the addition of more functionality such as "insert hooks to protect page tables". This change does result in various architectures performing unnecesary work, but this is fixed up where it is anticipated to occur. - "Rust support for mm_struct, vm_area_struct, and mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM structures. - "fix incorrectly disallowed anonymous VMA merges" from Lorenzo Stoakes takes advantage of some VMA merging opportunities which we've been missing for 15 years. - "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB flushing. Instead of flushing each address range in the provided iovec, we batch the flushing across all the iovec entries. The syscall's cost was approximately halved with a microbenchmark which was designed to load this particular operation. - "Track node vacancy to reduce worst case allocation counts" from Sidhartha Kumar makes the maple tree smarter about its node preallocation. stress-ng mmap performance increased by single-digit percentages and the amount of unnecessarily preallocated memory was dramaticelly reduced. - "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes a few unnecessary things which Baoquan noted when reading the code. - ""Enhance sysfs handling for memory hotplug in weighted interleave" from Rakie Kim "enhances the weighted interleave policy in the memory management subsystem by improving sysfs handling, fixing memory leaks, and introducing dynamic sysfs updates for memory hotplug support". Fixes things on error paths which we are unlikely to hit. - "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory" from SeongJae Park introduces new DAMOS quota goal metrics which eliminate the manual tuning which is required when utilizing DAMON for memory tiering. - "mm/vmalloc.c: code cleanup and improvements" from Baoquan He provides cleanups and small efficiency improvements which Baoquan found via code inspection. - "vmscan: enforce mems_effective during demotion" from Gregory Price changes reclaim to respect cpuset.mems_effective during demotion when possible. because presently, reclaim explicitly ignores cpuset.mems_effective when demoting, which may cause the cpuset settings to violated. This is useful for isolating workloads on a multi-tenant system from certain classes of memory more consistently. - "Clean up split_huge_pmd_locked() and remove unnecessary folio pointers" from Gavin Guo provides minor cleanups and efficiency gains in in the huge page splitting and migrating code. - "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache for `struct mem_cgroup', yielding improved memory utilization. - "add max arg to swappiness in memory.reclaim and lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness=" argument for memory.reclaim MGLRU's lru_gen. This directs proactive reclaim to reclaim from only anon folios rather than file-backed folios. - "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the first step on the path to permitting the kernel to maintain existing VMs while replacing the host kernel via file-based kexec. At this time only memblock's reserve_mem is preserved. - "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides and uses a smarter way of looping over a pfn range. By skipping ranges of invalid pfns. - "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning when a task is pinned a single NUMA mode. Dramatic performance benefits were seen in some real world cases. - "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank Garg addresses a warning which occurs during memory compaction when using JFS. - "move all VMA allocation, freeing and duplication logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more appropriate mm/vma.c. - "mm, swap: clean up swap cache mapping helper" from Kairui Song provides code consolidation and cleanups related to the folio_index() function. - "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that. - "memcg: Fix test_memcg_min/low test failures" from Waiman Long addresses some bogus failures which are being reported by the test_memcontrol selftest. - "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo Stoakes commences the deprecation of file_operations.mmap() in favor of the new file_operations.mmap_prepare(). The latter is more restrictive and prevents drivers from messing with things in ways which, amongst other problems, may defeat VMA merging. - "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's one. This is a step along the way to making memcg and objcg charging NMI-safe, which is a BPF requirement. - "mm/damon: minor fixups and improvements for code, tests, and documents" from SeongJae Park is yet another batch of miscellaneous DAMON changes. Fix and improve minor problems in code, tests and documents. - "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg stats to be irq safe. Another step along the way to making memcg charging and stats updates NMI-safe, a BPF requirement. - "Let unmap_hugepage_range() and several related functions take folio instead of page" from Fan Ni provides folio conversions in the hugetlb code. * tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits) mm: pcp: increase pcp->free_count threshold to trigger free_high mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range() mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page mm/hugetlb: pass folio instead of page to unmap_ref_private() memcg: objcg stock trylock without irq disabling memcg: no stock lock for cpu hot-unplug memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs memcg: make count_memcg_events re-entrant safe against irqs memcg: make mod_memcg_state re-entrant safe against irqs memcg: move preempt disable to callers of memcg_rstat_updated memcg: memcg_rstat_updated re-entrant safe against irqs mm: khugepaged: decouple SHMEM and file folios' collapse selftests/eventfd: correct test name and improve messages alloc_tag: check mem_profiling_support in alloc_tag_init Docs/damon: update titles and brief introductions to explain DAMOS selftests/damon/_damon_sysfs: read tried regions directories in order mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject() mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat() mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs ... |
||
![]() |
c89756bcf4 |
Power management updates for 6.16-rc1
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong Tian). - Fix typos in energy model documentation and example driver code (Moon Hee Lee, Atul Kumar Pant). - Rearrange the energy model management code and add a new function for adjusting a CPU energy model after adjusting the capacity of the given CPU to it (Rafael Wysocki). - Refactor cpufreq_online(), add and use cpufreq policy locking guards, use __free() in policy reference counting, and clean up core cpufreq code on top of that (Rafael Wysocki). - Fix boost handling on CPU suspend/resume and sysfs updates (Viresh Kumar). - Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay Ugwekar). - Add offline, online and suspend callbacks to the amd-pstate driver, rename and use the existing amd_pstate_epp callbacks in it (Dhananjay Ugwekar). - Add support for the "Requested CPU Min frequency" BIOS option to the amd-pstate driver (Dhananjay Ugwekar). - Reset amd-pstate driver mode after running selftests (Swapnil Sapkal). - Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan Chancellor). - Add helper for governor checks to the schedutil cpufreq governor and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki). - Populate the cpu_capacity sysfs entries from the intel_pstate driver after registering asym capacity support (Ricardo Neri). - Add support for enabling Energy-aware scheduling (EAS) to the intel_pstate driver when operating in the passive mode on a hybrid platform (Rafael Wysocki). - Drop redundant cpus_read_lock() from store_local_boost() in the cpufreq core (Seyediman Seyedarab). - Replace sscanf() with kstrtouint() in the cpufreq code and use a symbol instead of a raw number in it (Bowen Yu). - Add support for autonomous CPU performance state selection to the CPPC cpufreq driver (Lifeng Zheng). - OPP: Add dev_pm_opp_set_level() (Praveen Talari). - Introduce scope-based cleanup headers and mutex locking guards in OPP core (Viresh Kumar). - Switch OPP to use kmemdup_array() (Zhang Enpei). - Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the menu cpuidle governor (Zhongqiu Han). - Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla). - Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem Bityutskiy). - Fix typos in two comments in the teo cpuidle governor (Atul Kumar Pant). - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja Kalla). - Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki). - Add new devm_ functions for enabling runtime PM and runtime PM reference counting (Bence Csókás). - Remove size arguments from strscpy() calls in the hibernation core code (Thorsten Blum). - Adjust the handling of devices with asynchronous suspend enabled during system suspend and resume to start resuming them immediately after resuming their parents and to start suspending such a device immediately after suspending its first child (Rafael Wysocki). - Adjust messages printed during tasks freezing to avoid using pr_cont() (Andrew Sayers, Paul Menzel). - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan Zhang). - Add missing wakeup source attribute relax_count to sysfs and remove the space character at the end ofi the string produced by pm_show_wakelocks() (Zijun Hu). - Add configurable pm_test delay for hibernation (Zihuan Zhang). - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the cypd4226 device on Tegra boards from suspending prematurely (Jon Hunter). - Unbreak printing PM debug messages during hibernation and clean up some related code (Rafael Wysocki). - Add a systemd service to run cpupower and change cpupower binding's Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli). -----BEGIN PGP SIGNATURE----- iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0xS0SHHJqd0Byand5 c29ja2kubmV0AAoJEO5fvZ0v1OO1AwwH/Rvgza5YBPb9JZqWJT/ZiBw7HcEWHhP1 fNfcVU1gXPZiF0yoPfjfJua6BcLj6lyQ3d/+zWqqAcWfmRSD6HPe8yYz8qALUAqj RWhDa04aGj6B9bQuOjejatznYlQlkwCRT7zec+75D+dAHVMqR/Vt2LFAetCadgHe MQibAQmVFXu3RFkBjReTAdGzVoTXkwoZDrzdfA2aFAfMJNtJpOW4atUZvnucuctv VK3ZratrctCIw7yXEoB1nWSmlY7R5JlslplBfndjmmOnky3YxNr7C6paqwtbTWoF MiX48qkmLOGeO6gS8s/lVCDQ4oZ+UNFQvXRsM5NGjycBikhHX/dp/w4= =dIqJ -----END PGP SIGNATURE----- Merge tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "Once again, the changes are dominated by cpufreq updates, but this time the majority of them are cpufreq core changes, mostly related to the introduction of policy locking guards and __free() usage, and fixes related to boost handling. Still, there is also a significant update of the intel_pstate driver making it register an energy model when running on a hybrid platform which is used for enabling energy-aware scheduling (EAS) if the driver operates in the passive mode (and schedutil is used as the cpufreq governor for all CPUs which is the passive mode default). There are some amd-pstate driver updates too, for a good measure, including the "Requested CPU Min frequency" BIOS option support and new online/offline callbacks. In the cpuidle space, the most significant change is the addition of a C1 demotion on/off sysfs knob to intel_idle which should help some users to configure their systems more precisely. There is also the conversion of the PSCI cpuidle driver to a faux device one and there are two small updates of cpuidle governors. Device power management is also modified quite a bit, especially the handling of devices with asynchronous suspend and resume enabled during system transitions. They are now going to be handled more asynchronously during suspend transitions and somewhat less aggressively during resume transitions. Apart from the above, the operating performance points (OPP) library is now going to use mutex locking guards and scope-based cleanup helpers and there is the usual bunch of assorted fixes and code cleanups. Specifics: - Fix potential division-by-zero error in em_compute_costs() (Yaxiong Tian) - Fix typos in energy model documentation and example driver code (Moon Hee Lee, Atul Kumar Pant) - Rearrange the energy model management code and add a new function for adjusting a CPU energy model after adjusting the capacity of the given CPU to it (Rafael Wysocki) - Refactor cpufreq_online(), add and use cpufreq policy locking guards, use __free() in policy reference counting, and clean up core cpufreq code on top of that (Rafael Wysocki) - Fix boost handling on CPU suspend/resume and sysfs updates (Viresh Kumar) - Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay Ugwekar) - Add offline, online and suspend callbacks to the amd-pstate driver, rename and use the existing amd_pstate_epp callbacks in it (Dhananjay Ugwekar) - Add support for the "Requested CPU Min frequency" BIOS option to the amd-pstate driver (Dhananjay Ugwekar) - Reset amd-pstate driver mode after running selftests (Swapnil Sapkal) - Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan Chancellor) - Add helper for governor checks to the schedutil cpufreq governor and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki) - Populate the cpu_capacity sysfs entries from the intel_pstate driver after registering asym capacity support (Ricardo Neri) - Add support for enabling Energy-aware scheduling (EAS) to the intel_pstate driver when operating in the passive mode on a hybrid platform (Rafael Wysocki) - Drop redundant cpus_read_lock() from store_local_boost() in the cpufreq core (Seyediman Seyedarab) - Replace sscanf() with kstrtouint() in the cpufreq code and use a symbol instead of a raw number in it (Bowen Yu) - Add support for autonomous CPU performance state selection to the CPPC cpufreq driver (Lifeng Zheng) - OPP: Add dev_pm_opp_set_level() (Praveen Talari) - Introduce scope-based cleanup headers and mutex locking guards in OPP core (Viresh Kumar) - Switch OPP to use kmemdup_array() (Zhang Enpei) - Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the menu cpuidle governor (Zhongqiu Han) - Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla) - Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem Bityutskiy) - Fix typos in two comments in the teo cpuidle governor (Atul Kumar Pant) - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja Kalla) - Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki) - Add new devm_ functions for enabling runtime PM and runtime PM reference counting (Bence Csókás) - Remove size arguments from strscpy() calls in the hibernation core code (Thorsten Blum) - Adjust the handling of devices with asynchronous suspend enabled during system suspend and resume to start resuming them immediately after resuming their parents and to start suspending such a device immediately after suspending its first child (Rafael Wysocki) - Adjust messages printed during tasks freezing to avoid using pr_cont() (Andrew Sayers, Paul Menzel) - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan Zhang) - Add missing wakeup source attribute relax_count to sysfs and remove the space character at the end ofi the string produced by pm_show_wakelocks() (Zijun Hu) - Add configurable pm_test delay for hibernation (Zihuan Zhang) - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the cypd4226 device on Tegra boards from suspending prematurely (Jon Hunter) - Unbreak printing PM debug messages during hibernation and clean up some related code (Rafael Wysocki) - Add a systemd service to run cpupower and change cpupower binding's Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)" * tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits) cpufreq: CPPC: Add support for autonomous selection cpufreq: Update sscanf() to kstrtouint() cpufreq: Replace magic number OPP: switch to use kmemdup_array() PM: freezer: Rewrite restarting tasks log to remove stray *done.* PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn() cpufreq: drop redundant cpus_read_lock() from store_local_boost() cpupower: do not install files to /etc/default/ cpupower: do not call systemctl at install time cpupower: do not write DESTDIR to cpupower.service PM: sleep: Introduce pm_sleep_transition_in_progress() cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver() cpufreq: intel_pstate: Document hybrid processor support cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache cpufreq: intel_pstate: EAS support for hybrid platforms PM: EM: Introduce em_adjust_cpu_capacity() PM: EM: Move CPU capacity check to em_adjust_new_capacity() PM: EM: Documentation: Fix typos in example driver code cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas() PM: sleep: Introduce pm_suspend_in_progress() ... |
||
![]() |
76524ffd10 |
Merge branches 'pm-runtime' and 'pm-sleep'
Merge updates related to system sleep handling and runtime PM for 6.16-rc1: - Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja Kalla). - Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki). - Add new devm_ functions for enabling runtime PM and runtime PM reference counting (Bence Csókás). - Remove size arguments from strscpy() calls in the hibernation core code (Thorsten Blum). - Adjust the handling of devices with asynchronous suspend enabled during system suspend and resume to start resuming them immediately after resuming their parents and to start suspending such a device immediately after suspending its first child (Rafael Wysocki). - Adjust messages printed during tasks freezing to avoid using pr_cont() (Andrew Sayers, Paul Menzel). - Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan Zhang). - Add missing wakeup source attribute relax_count to sysfs and remove the space character at the end ofi the string produced by pm_show_wakelocks() (Zijun Hu). - Add configurable pm_test delay for hibernation (Zihuan Zhang). - Disable asynchronous suspend in ucsi_ccg_probe() to prevent the cypd4226 device on Tegra boards from suspending prematurely (Jon Hunter). - Unbreak printing PM debug messages during hibernation and clean up some related code (Rafael Wysocki). * pm-runtime: PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn() PM: sysfs: Move debug runtime PM attributes to runtime_attrs[] PM: runtime: Add new devm functions * pm-sleep: PM: freezer: Rewrite restarting tasks log to remove stray *done.* PM: sleep: Introduce pm_sleep_transition_in_progress() PM: sleep: Introduce pm_suspend_in_progress() PM: sleep: Print PM debug messages during hibernation ucsi_ccg: Disable async suspend in ucsi_ccg_probe() PM: hibernate: add configurable delay for pm_test PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks() PM: wakeup: Add missing wakeup source attribute relax_count PM: sleep: Remove unnecessary !! PM: sleep: Use two lines for "Restarting..." / "done" messages PM: sleep: Make suspend of devices more asynchronous PM: sleep: Suspend async parents after suspending children PM: sleep: Resume children after resuming the parent PM: hibernate: Remove size arguments when calling strscpy() |
||
![]() |
6f59de9bc0 |
for-6.16/block-20250523
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmgwnGYQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgpq9aD/4iqOts77xhWWLrOJWkkhOcV5rREeyppq8X MKYul9S4cc4Uin9Xou9a+nab31QBQEk3nsN3kX9o3yAXvkh6yUm36HD8qYNW/46q IUkwRQQJ0COyTnexMZQNTbZPQDIYcenXmQxOcrEJ5jC1Jcz0sOKHsgekL+ab3kCy fLnuz2ozvjGDMala/NmE8fN5qSlj4qQABHgbamwlwfo4aWu07cwfqn5G/FCYJgDO xUvsnTVclom2g4G+7eSSvGQI1QyAxl5QpviPnj/TEgfFBFnhbCSoBTEY6ecqhlfW 6u59MF/Uw8E+weiuGY4L87kDtBhjQs3UMSLxCuwH7MxXb25ff7qB4AIkcFD0kKFH 3V5NtwqlU7aQT0xOjGxaHhfPwjLD+FVss4ARmuHS09/Kn8egOW9yROPyetnuH84R Oz0Ctnt1IPLFjvGeg3+rt9fjjS9jWOXLITb9Q6nX9gnCt7orCwIYke8YCpmnJyhn i+fV4CWYIQBBRKxIT0E/GhJxZOmL0JKpomnbpP2dH8npemnsTCuvtfdrK9gfhH2X chBVqCPY8MNU5zKfzdEiavPqcm9392lMzOoOXW2pSC1eAKqnAQ86ZT3r7rLntqE8 75LxHcvaQIsnpyG+YuJVHvoiJ83TbqZNpyHwNaQTYhDmdYpp2d/wTtTQywX4DuXb Y6NDJw5+kQ== =1PNK -----END PGP SIGNATURE----- Merge tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux Pull block updates from Jens Axboe: - ublk updates: - Add support for updating the size of a ublk instance - Zero-copy improvements - Auto-registering of buffers for zero-copy - Series simplifying and improving GET_DATA and request lookup - Series adding quiesce support - Lots of selftests additions - Various cleanups - NVMe updates via Christoph: - add per-node DMA pools and use them for PRP/SGL allocations (Caleb Sander Mateos, Keith Busch) - nvme-fcloop refcounting fixes (Daniel Wagner) - support delayed removal of the multipath node and optionally support the multipath node for private namespaces (Nilay Shroff) - support shared CQs in the PCI endpoint target code (Wilfred Mallawa) - support admin-queue only authentication (Hannes Reinecke) - use the crc32c library instead of the crypto API (Eric Biggers) - misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes Reinecke, Leon Romanovsky, Gustavo A. R. Silva) - MD updates via Yu: - Fix that normal IO can be starved by sync IO, found by mkfs on newly created large raid5, with some clean up patches for bdev inflight counters - Clean up brd, getting rid of atomic kmaps and bvec poking - Add loop driver specifically for zoned IO testing - Eliminate blk-rq-qos calls with a static key, if not enabled - Improve hctx locking for when a plug has IO for multiple queues pending - Remove block layer bouncing support, which in turn means we can remove the per-node bounce stat as well - Improve blk-throttle support - Improve delay support for blk-throttle - Improve brd discard support - Unify IO scheduler switching. This should also fix a bunch of lockdep warnings we've been seeing, after enabling lockdep support for queue freezing/unfreezeing - Add support for block write streams via FDP (flexible data placement) on NVMe - Add a bunch of block helpers, facilitating the removal of a bunch of duplicated boilerplate code - Remove obsolete BLK_MQ pci and virtio Kconfig options - Add atomic/untorn write support to blktrace - Various little cleanups and fixes * tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits) selftests: ublk: add test for UBLK_F_QUIESCE ublk: add feature UBLK_F_QUIESCE selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE traceevent/block: Add REQ_ATOMIC flag to block trace events ublk: run auto buf unregisgering in same io_ring_ctx with registering io_uring: add helper io_uring_cmd_ctx_handle() ublk: remove io argument from ublk_auto_buf_reg_fallback() ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch() selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK selftests: ublk: support UBLK_F_AUTO_BUF_REG ublk: support UBLK_AUTO_BUF_REG_FALLBACK ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG ublk: prepare for supporting to register request buffer automatically ublk: convert to refcount_t selftests: ublk: make IO & device removal test more stressful nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk nvme: introduce multipath_always_on module param nvme-multipath: introduce delayed removal of the multipath head node nvme-pci: derive and better document max segments limits nvme-pci: use struct_size for allocation struct nvme_dev ... |
||
![]() |
eca6413041 |
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
`pr_cont()` unfortunately does not work here, as other parts of the Linux kernel log between the two log lines: [18445.295056] r8152-cfgselector 4-1.1.3: USB disconnect, device number 5 [18445.295112] OOM killer enabled. [18445.295115] Restarting tasks ... [18445.295185] usb 3-1: USB disconnect, device number 2 [18445.295193] usb 3-1.1: USB disconnect, device number 3 [18445.296262] usb 3-1.5: USB disconnect, device number 4 [18445.297017] done. [18445.297029] random: crng reseeded on system resumption `pr_cont()` also uses the default log level, normally warning, if the corresponding log line is interrupted. Therefore, replace the `pr_cont()`, and explicitly log it as a separate line with log level info: Restarting tasks: Starting […] Restarting tasks: Done Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Link: https://patch.msgid.link/20250511174648.950430-1-pmenzel@molgen.mpg.de [ rjw: Rebase on top of an earlier analogous change ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
f5c0ecf196 |
PM: sleep: Introduce pm_sleep_transition_in_progress()
The "suspend in progress" check in device_wakeup_enable() does not cover hibernation, but arguably it should do that, so introduce pm_sleep_transition_in_progress() covering transitions during both system suspend and hibernation to use in there and use it also in pm_debug_messages_should_print(). Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/7820474.EvYhyI6sBW@rjwysocki.net [ rjw: Move the new function definition under CONFIG_PM_SLEEP ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
4a6b1cf0d4 |
PM: EM: Introduce em_adjust_cpu_capacity()
Add a function for updating the Energy Model for a CPU after its capacity has changed, which subsequently will be used by the intel_pstate driver. An EM_PERF_DOMAIN_ARTIFICIAL check is added to em_recalc_and_update() to prevent it from calling em_compute_costs() for an "artificial" perf domain with a NULL cb parameter which would cause it to crash. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Christian Loehle <christian.loehle@arm.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://patch.msgid.link/3637203.iIbC2pHGDl@rjwysocki.net |
||
![]() |
3e3ba654d3 |
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
Move the check of the CPU capacity currently stored in the energy model against the arch_scale_cpu_capacity() value to em_adjust_new_capacity() so it will be done regardless of where the latter is called from. This will be useful when a new em_adjust_new_capacity() caller is added subsequently. While at it, move the pd local variable declaration in em_check_capacity_update() into the loop in which it is used. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Tested-by: Christian Loehle <christian.loehle@arm.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com> Link: https://patch.msgid.link/7810787.EvYhyI6sBW@rjwysocki.net |
||
![]() |
34a364ff04 |
PM: sleep: Introduce pm_suspend_in_progress()
Introduce pm_suspend_in_progress() to be used for checking if a system- wide suspend or resume transition is in progress, instead of comparing pm_suspend_target_state directly to PM_SUSPEND_ON, and use it where applicable. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://patch.msgid.link/2020901.PYKUYFuaPT@rjwysocki.net |
||
![]() |
1b17d4525b |
PM: sleep: Print PM debug messages during hibernation
Commit |
||
![]() |
312eca8a14 |
mm, PM: use for_each_valid_pfn() in kernel/power/snapshot.c
Link: https://lkml.kernel.org/r/20250423133821.789413-5-dwmw2@infradead.org Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: David Hildenbrand <david@redhat.com> Cc: Marc Rutland <mark.rutland@arm.com> Cc: Marc Zyngier <maz@kernel.org> Cc: Ruihan Li <lrh2000@pku.edu.cn> Cc: Will Deacon <will@kernel.org> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
50c9bb30dc |
PM: hibernate: add configurable delay for pm_test
Turn the default 5 second test delay for hibernation into a configurable module parameter, so users can determine how long to wait in this pseudo-hibernate state before resuming the system. The configurable delay parameter has been added for suspend, so add an analogous one for hibernation. Example (wait 30 seconds); # echo 30 > /sys/module/hibernate/parameters/pm_test_delay # echo core > /sys/power/pm_test Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20250507063520.419635-1-zhangzihuan@kylinos.cn [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
f0050a3e21 |
PM: wakeup: Delete space in the end of string shown by pm_show_wakelocks()
pm_show_wakelocks() is called to generate a string when showing attributes /sys/power/wake_(lock|unlock), but the string ends with an unwanted space that was added back by mistake by commit |
||
![]() |
eacfbf7419
|
power: freeze filesystems during suspend/resume
Now all the pieces are in place to actually allow the power subsystem to freeze/thaw filesystems during suspend/resume. Filesystems are only frozen and thawed if the power subsystem does actually own the freeze. We could bubble up errors and fail suspend/resume if the error isn't EBUSY (aka it's already frozen) but I don't think that this is worth it. Filesystem freezing during suspend/resume is best-effort. If the user has 500 ext4 filesystems mounted and 4 fail to freeze for whatever reason then we simply skip them. What we have now is already a big improvement and let's see how we fare with it before making our lives even harder (and uglier) than we have to. We add a new sysctl know /sys/power/freeze_filesystems that will allow userspace to freeze filesystems during suspend/hibernate. For now it defaults to off. The thaw logic doesn't require checking whether freezing is enabled because the power subsystem exclusively owns frozen filesystems for the duration of suspend/hibernate and is able to skip filesystems it doesn't need to freeze. Also it is technically possible that filesystem filesystem_freeze_enabled is true and power freezes the filesystems but before freezing all processes another process disables filesystem_freeze_enabled. If power were to place the filesystems_thaw() call under filesystems_freeze_enabled it would fail to thaw the fileystems it frozw. The exclusive holder mechanism makes it possible to iterate through the list without any concern making sure that no filesystems are left frozen. Link: https://lore.kernel.org/r/20250402-work-freeze-v2-3-6719a97b52ac@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
![]() |
0cb8c299f8 |
PM: hibernate: split and simplify hib_submit_io
Split hib_submit_io into a sync and async version. The sync version is a small wrapper around bdev_rw_virt which implements all the logic to add a kernel direct mapping range to a bio and synchronously submits it, while the async version is slightly simplified using the bio_add_virt_nofail for adding the single range. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Link: https://lore.kernel.org/r/20250507120451.4000627-13-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
![]() |
179c0c7044 |
PM: EM: Fix potential division-by-zero error in em_compute_costs()
When the device is of a non-CPU type, table[i].performance won't be
initialized in the previous em_init_performance(), resulting in division
by zero when calculating costs in em_compute_costs().
Since the 'cost' algorithm is only used for EAS energy efficiency
calculations and is currently not utilized by other device drivers, we
should add the _is_cpu_device(dev) check to prevent this division-by-zero
issue.
Fixes:
|
||
![]() |
9cd9d3fdd7 |
PM: sleep: Remove unnecessary !!
Since initcall_debug is a bool variable, it is not necessary to convert it to bool with the help of a double logical negation (!!). Remove the redundant operation. Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn> Link: https://patch.msgid.link/20250424060339.73119-1-zhangzihuan@kylinos.cn [ rjw: Changelog rewrite ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
036c94c9fd |
PM: sleep: Use two lines for "Restarting..." / "done" messages
Other messages are occasionally printed between these two, for example:
[203104.106534] Restarting tasks ...
[203104.106559] mei_hdcp 0000:00:16.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops i915_hdcp_ops [i915])
[203104.112354] done.
This seems to be a timing issue, seen in two of the eleven
hibernation exits in my current `dmesg` output.
When printed on its own, the "done" message has the default log level.
This makes the output of `dmesg --level=warn` quite misleading.
Add enough context for the "done" messages to make sense on their own,
and use the same log level for all messages.
Change the messages to "<event>..." / "Done <event>.", unlike
|
||
![]() |
cfdb7520f9 |
PM: hibernate: Remove size arguments when calling strscpy()
The size parameter is optional and strscpy() automatically determines the length of the destination buffer using sizeof() if the argument is omitted. This makes the explicit sizeof() calls unnecessary. Remove them to shorten and simplify the code. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250318080755.61126-2-thorsten.blum@linux.dev Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
e5e0e6bebe |
This update includes the following changes:
API: - Remove legacy compression interface. - Improve scatterwalk API. - Add request chaining to ahash and acomp. - Add virtual address support to ahash and acomp. - Add folio support to acomp. - Remove NULL dst support from acomp. Algorithms: - Library options are fuly hidden (selected by kernel users only). - Add Kerberos5 algorithms. - Add VAES-based ctr(aes) on x86. - Ensure LZO respects output buffer length on compression. - Remove obsolete SIMD fallback code path from arm/ghash-ce. Drivers: - Add support for PCI device 0x1134 in ccp. - Add support for rk3588's standalone TRNG in rockchip. - Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93. - Fix bugs in tegra uncovered by multi-threaded self-test. - Fix corner cases in hisilicon/sec2. Others: - Add SG_MITER_LOCAL to sg miter. - Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmfiQ9kACgkQxycdCkmx i6fFZg/9GWjC1FLEV66vNlYAIzFGwzwWdFGyQzXyP235Cphhm4qt9gx7P91N6Lvc pplVjNEeZHoP8lMw+AIeGc2cRhIwsvn8C+HA3tCBOoC1qSe8T9t7KHAgiRGd/0iz UrzVBFLYlR9i4tc0T5peyQwSctv8DfjWzduTmI3Ts8i7OQcfeVVgj3sGfWam7kjF 1GJWIQH7aPzT8cwFtk8gAK1insuPPZelT1Ppl9kUeZe0XUibrP7Gb5G9simxXAyi B+nLCaJYS6Hc1f47cfR/qyZSeYQN35KTVrEoKb1pTYXfEtMv6W9fIvQVLJRYsqpH RUBdDJUseE+WckR6glX9USrh+Fv9d+HfsTXh1fhpApKU5sQJ7pDbUm4ge8p6htNG MIszbJPdqajYveRLuPUjFlUXaqomos8eT6BZA+RLHm1cogzEOm+5bjspbfRNAVPj x9KiDu5lXNiFj02v/MkLKUe3bnGIyVQnZNi7Rn0Rpxjv95tIjVpksZWMPJarxUC6 5zdyM2I5X0Z9+teBpbfWyqfzSbAs/KpzV8S/xNvWDUT6NlpYGBeNXrCDTXcwJLAh PRW0w1EJUwsZbPi8GEh5jNzo/YK1cGsUKrihKv7YgqSSopMLI8e/WVr8nKZMVDFA O+6F6ec5lR7KsOIMGUqrBGFU1ccAeaLLvLK3H5J8//gMMg82Uik= =aQNt -----END PGP SIGNATURE----- Merge tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove legacy compression interface - Improve scatterwalk API - Add request chaining to ahash and acomp - Add virtual address support to ahash and acomp - Add folio support to acomp - Remove NULL dst support from acomp Algorithms: - Library options are fuly hidden (selected by kernel users only) - Add Kerberos5 algorithms - Add VAES-based ctr(aes) on x86 - Ensure LZO respects output buffer length on compression - Remove obsolete SIMD fallback code path from arm/ghash-ce Drivers: - Add support for PCI device 0x1134 in ccp - Add support for rk3588's standalone TRNG in rockchip - Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93 - Fix bugs in tegra uncovered by multi-threaded self-test - Fix corner cases in hisilicon/sec2 Others: - Add SG_MITER_LOCAL to sg miter - Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp" * tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (187 commits) crypto: testmgr - Add multibuffer acomp testing crypto: acomp - Fix synchronous acomp chaining fallback crypto: testmgr - Add multibuffer hash testing crypto: hash - Fix synchronous ahash chaining fallback crypto: arm/ghash-ce - Remove SIMD fallback code path crypto: essiv - Replace memcpy() + NUL-termination with strscpy() crypto: api - Call crypto_alg_put in crypto_unregister_alg crypto: scompress - Fix incorrect stream freeing crypto: lib/chacha - remove unused arch-specific init support crypto: remove obsolete 'comp' compression API crypto: compress_null - drop obsolete 'comp' implementation crypto: cavium/zip - drop obsolete 'comp' implementation crypto: zstd - drop obsolete 'comp' implementation crypto: lzo - drop obsolete 'comp' implementation crypto: lzo-rle - drop obsolete 'comp' implementation crypto: lz4hc - drop obsolete 'comp' implementation crypto: lz4 - drop obsolete 'comp' implementation crypto: deflate - drop obsolete 'comp' implementation crypto: 842 - drop obsolete 'comp' implementation crypto: nx - Migrate to scomp API ... |
||
![]() |
96050814a3 |
printk changes for 6.15
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmflJC4ACgkQUqAMR0iA lPIEMBAAsIJmQPHdZUQ49tkMGMoQPU9gnrrDZbRzN9IWwMQQymwEobSEkJkrx7O3 MFQHc5Z29cAxDqrWDCG5hrH0P3rd994pLPgC/XZC9+UbksYIkIrudCqaPaekLVaw BQmBZnZRe7PltOiDpx/TxQ8WQgNlAmZpLpIRTB3ePHZpikq/mf4CGcoYXkrNij1j E7uzurLZssJwXasRkWOVNvaOFyVcxrjn78H0JoT7mVeh2IUkWyMALX4IyDeD6Uvh SCe19/6W3Uyeh/jpJ6+gjuirVy/Vam/2GXeer4yKpgSQBtsqIaGyki4Cc6Xy12gU 71nRPTggysZXNnqZ40qw68Irb9JGAo63qFDwWf3OQI+yQQWHyGZIinxr+2xupwWF ZgmDJtvUsWKHT4+WmB9+MVTGW7Jy8wKq2u/Haf8xCJxs2yhI0J8iUvQi3CPAMdRH Q8G9UJP29Lfj0hdKVT2/wVNGxZKIZ8c6v1vR6Rd1hJ0Zqp4Oj+XGr0btE8Ah5LYv GI/M00LCdTNT2kBbbw8lekovUIs2stiRl6hfKoQFR11oiZwFDUePLDdJH2GiJAZm g9fPs6YuBERfPtzUeo9a9UbSd6oPTLgLNBEklpHUTWilzO8E/Jh+ZXyvQwj7eXyq Hi4OnShn1uxL68o6DJfKsF2qW8S2U5g61JrU3D1CaQ98Derrp0o= =lNTZ -----END PGP SIGNATURE----- Merge tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - New option "printk.debug_non_panic_cpus" allows to store printk messages from non-panic CPUs during panic. It might be useful when panic() fails. It is disabled by default because it increases the chance to see the messages printed before panic() and on the panic-CPU. - New build option "CONFIG_NULL_TTY_DEFAULT_CONSOLE" allows to build kernel without the virtual terminal support which prefers ttynull over serial console. - Do not unblank suspended consoles. - Some code clean up. * tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk/panic: Add option to allow non-panic CPUs to write to the ring buffer. printk: Add an option to allow ttynull to be a default console device printk: Check CON_SUSPEND when unblanking a console printk: Rename console_start to console_resume printk: Rename console_stop to console_suspend printk: Rename resume_console to console_resume_all printk: Rename suspend_console to console_suspend_all |
||
![]() |
5a98796468 |
Merge branch 'pm-sleep'
Merge updates related to system sleep for 6.15-rc1 including fixes, cleanups and a rework of the "smart suspend" driver flag handling to avoid issues that may occur when drivers using it depend on some other drivers: - Rework the handling of the "smart suspend" driver flag in the PM core to avoid issues hat may occur when drivers using it depend on some other drivers and clean up the related PM core code (Rafael Wysocki, Colin Ian King). - Fix the handling of devices with the power.direct_complete flag set if device_suspend() returns an error for at least one device to avoid situations in which some of them may not be resumed (Rafael Wysocki). - Use mutex_trylock() in hibernate_compressor_param_set() to avoid a possible deadlock that may occur if the "compressor" hibernation module parameter is accessed during the registration of a new ieee80211 device (Lizhi Xu). - Suppress sleeping parent warning in device_pm_add() in the case when new children are added under a device with the power.direct_complete set after it has been processed by device_resume() (Xu Yang). - Remove needless return in three void functions related to system wakeup (Zijun Hu). - Replace deprecated kmap_atomic() with kmap_local_page() in the hibernation core code (David Reaver). - Remove unused helper functions related to system sleep (David Alan Gilbert). - Clean up s2idle_enter() so it does not lock and unlock CPU offline in vain and update comments in it (Ulf Hansson). - Clean up broken white space in dpm_wait_for_children() (Geert Uytterhoeven). * pm-sleep: PM: sleep: Fix bit masking operation PM: sleep: Fix handling devices with direct_complete set on errors PM: sleep: core: Fix indentation in dpm_wait_for_children() PM: s2idle: Extend comment in s2idle_enter() PM: s2idle: Drop redundant locks when entering s2idle PM: sleep: Remove unused pm_generic_ wrappers PM: sleep: Rearrange dpm_async_fn() and async state clearing PM: sleep: Rename power.async_in_progress to power.work_in_progress PM: core: Tweak pm_runtime_block_if_disabled() return value PM: runtime: Convert pm_runtime_blocked() to static inline PM: sleep: Update power.smart_suspend under PM spinlock PM: sleep: Adjust check before setting power.must_resume PM: wakeup: Remove needless return in three void APIs PM: sleep: Suppress sleeping parent warning in special case PM: hibernate: Avoid deadlock in hibernate_compressor_param_set() PM: sleep: Avoid unnecessary checks in device_prepare_smart_suspend() PM: sleep: Use DPM_FLAG_SMART_SUSPEND conditionally PM: runtime: Introduce pm_runtime_blocked() PM: Block enabling of runtime PM during system suspend PM: hibernate: Replace deprecated kmap_atomic() with kmap_local_page() |
||
![]() |
b03d542c3c |
PM: hibernate: Use crypto_acomp interface
Replace the legacy crypto compression interface with the new acomp interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
![]() |
4b7d654258 |
PM: s2idle: Extend comment in s2idle_enter()
The s2idle_lock must be held while checking for a pending wakeup and while moving into S2IDLE_STATE_ENTER, to make sure a wakeup doesn't get lost. Let's extend the comment in the code to make this clear. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://patch.msgid.link/20250311160827.1129643-3-ulf.hansson@linaro.org [ rjw: Rewrote the new comment ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
0f42194c6b |
PM: s2idle: Drop redundant locks when entering s2idle
The calls to cpus_read_lock|unlock() protects us from getting CPUS hotplugged, while entering suspend-to-idle. However, when s2idle_enter() is called we should be far beyond the point when CPUs may be hotplugged. Let's therefore simplify the code and drop the use of the lock. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://patch.msgid.link/20250311160827.1129643-2-ulf.hansson@linaro.org [ rjw: Rewrote the new comment ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
63830aef74 |
printk: Rename resume_console to console_resume_all
The function resume_console has a misleading name, since it resumes all consoles, so rename it accordingly. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-2-0b878577f2e6@suse.com [pmladek@suse.com: Fixed typo in the commit message.] Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
![]() |
e9cec4487c |
printk: Rename suspend_console to console_suspend_all
The function suspend_console has a misleading name, since it suspends all consoles, so rename it accordingly. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-1-0b878577f2e6@suse.com [pmladek@suse.com: Fixed typo in the commit message.] Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
![]() |
17f08280cf |
PM: EM: Rework the depends on for CONFIG_ENERGY_MODEL
Now not only CPUs can use energy efficiency models, but GPUs can also use. On the other hand, even with only one CPU, we can also use energy_model to align control in thermal. So remove the dependence of SMP, and add the DEVFREQ. Signed-off-by: Jeson Gao <jeson.gao@unisoc.com> [Added missing SMP config option in DTPM_CPU dependency] Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/20250307132649.4056210-1-lukasz.luba@arm.com [ rjw: Subject edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
3ee7be9e10 |
PM: EM: Address RCU-related sparse warnings
The usage of __rcu in the Energy Model code is quite inconsistent which causes the following sparse warnings to trigger: kernel/power/energy_model.c:169:15: warning: incorrect type in assignment (different address spaces) kernel/power/energy_model.c:169:15: expected struct em_perf_table [noderef] __rcu *table kernel/power/energy_model.c:169:15: got struct em_perf_table * kernel/power/energy_model.c:171:9: warning: incorrect type in argument 1 (different address spaces) kernel/power/energy_model.c:171:9: expected struct callback_head *head kernel/power/energy_model.c:171:9: got struct callback_head [noderef] __rcu * kernel/power/energy_model.c:171:9: warning: cast removes address space '__rcu' of expression kernel/power/energy_model.c:182:19: warning: incorrect type in argument 1 (different address spaces) kernel/power/energy_model.c:182:19: expected struct kref *kref kernel/power/energy_model.c:182:19: got struct kref [noderef] __rcu * kernel/power/energy_model.c:200:15: warning: incorrect type in assignment (different address spaces) kernel/power/energy_model.c:200:15: expected struct em_perf_table [noderef] __rcu *table kernel/power/energy_model.c:200:15: got void *[assigned] _res kernel/power/energy_model.c:204:20: warning: incorrect type in argument 1 (different address spaces) kernel/power/energy_model.c:204:20: expected struct kref *kref kernel/power/energy_model.c:204:20: got struct kref [noderef] __rcu * kernel/power/energy_model.c:320:19: warning: incorrect type in argument 1 (different address spaces) kernel/power/energy_model.c:320:19: expected struct kref *kref kernel/power/energy_model.c:320:19: got struct kref [noderef] __rcu * kernel/power/energy_model.c:325:45: warning: incorrect type in argument 2 (different address spaces) kernel/power/energy_model.c:325:45: expected struct em_perf_state *table kernel/power/energy_model.c:325:45: got struct em_perf_state [noderef] __rcu * kernel/power/energy_model.c:425:45: warning: incorrect type in argument 3 (different address spaces) kernel/power/energy_model.c:425:45: expected struct em_perf_state *table kernel/power/energy_model.c:425:45: got struct em_perf_state [noderef] __rcu * kernel/power/energy_model.c:442:15: warning: incorrect type in argument 1 (different address spaces) kernel/power/energy_model.c:442:15: expected void const *objp kernel/power/energy_model.c:442:15: got struct em_perf_table [noderef] __rcu *[assigned] em_table kernel/power/energy_model.c:626:55: warning: incorrect type in argument 2 (different address spaces) kernel/power/energy_model.c:626:55: expected struct em_perf_state *table kernel/power/energy_model.c:626:55: got struct em_perf_state [noderef] __rcu * kernel/power/energy_model.c:681:16: warning: incorrect type in assignment (different address spaces) kernel/power/energy_model.c:681:16: expected struct em_perf_state *new_ps kernel/power/energy_model.c:681:16: got struct em_perf_state [noderef] __rcu * kernel/power/energy_model.c:699:37: warning: incorrect type in argument 2 (different address spaces) kernel/power/energy_model.c:699:37: expected struct em_perf_state *table kernel/power/energy_model.c:699:37: got struct em_perf_state [noderef] __rcu * kernel/power/energy_model.c:733:38: warning: incorrect type in argument 3 (different address spaces) kernel/power/energy_model.c:733:38: expected struct em_perf_state *table kernel/power/energy_model.c:733:38: got struct em_perf_state [noderef] __rcu * kernel/power/energy_model.c:855:53: warning: dereference of noderef expression kernel/power/energy_model.c:864:32: warning: dereference of noderef expression This is because the __rcu annotation for sparse is only applicable to pointers that need rcu_dereference() or equivalent for protection, which basically means pointers assigned with rcu_assign_pointer(). Make all of the above sparse warnings go away by cleaning up the usage of __rcu and using rcu_dereference_protected() where applicable. Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/5885405.DvuYhMxLoT@rjwysocki.net |
||
![]() |
860a731f52 |
PM: EM: Consify two parameters of em_dev_register_perf_domain()
Notice that em_dev_register_perf_domain() and the functions called by it do not update objects pointed to by its cb and cpus parameters, so the const modifier can be added to them. This allows the return value of cpumask_of() or a pointer to a struct em_data_callback declared as const to be passed to em_dev_register_perf_domain() directly without explicit type casting which is rather handy. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/4648962.LvFx2qVVIh@rjwysocki.net |
||
![]() |
52323ed144 |
PM: hibernate: Avoid deadlock in hibernate_compressor_param_set()
syzbot reported a deadlock in lock_system_sleep() (see below). The write operation to "/sys/module/hibernate/parameters/compressor" conflicts with the registration of ieee80211 device, resulting in a deadlock when attempting to acquire system_transition_mutex under param_lock. To avoid this deadlock, change hibernate_compressor_param_set() to use mutex_trylock() for attempting to acquire system_transition_mutex and return -EBUSY when it fails. Task flags need not be saved or adjusted before calling mutex_trylock(&system_transition_mutex) because the caller is not going to end up waiting for this mutex and if it runs concurrently with system suspend in progress, it will be frozen properly when it returns to user space. syzbot report: syz-executor895/5833 is trying to acquire lock: ffffffff8e0828c8 (system_transition_mutex){+.+.}-{4:4}, at: lock_system_sleep+0x87/0xa0 kernel/power/main.c:56 but task is already holding lock: ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: kernel_param_lock kernel/params.c:607 [inline] ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: param_attr_store+0xe6/0x300 kernel/params.c:586 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (param_lock){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 ieee80211_rate_control_ops_get net/mac80211/rate.c:220 [inline] rate_control_alloc net/mac80211/rate.c:266 [inline] ieee80211_init_rate_ctrl_alg+0x18d/0x6b0 net/mac80211/rate.c:1015 ieee80211_register_hw+0x20cd/0x4060 net/mac80211/main.c:1531 mac80211_hwsim_new_radio+0x304e/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5558 init_mac80211_hwsim+0x432/0x8c0 drivers/net/wireless/virtual/mac80211_hwsim.c:6910 do_one_initcall+0x128/0x700 init/main.c:1257 do_initcall_level init/main.c:1319 [inline] do_initcalls init/main.c:1335 [inline] do_basic_setup init/main.c:1354 [inline] kernel_init_freeable+0x5c7/0x900 init/main.c:1568 kernel_init+0x1c/0x2b0 init/main.c:1457 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:148 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #2 (rtnl_mutex){+.+.}-{4:4}: __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 wg_pm_notification drivers/net/wireguard/device.c:80 [inline] wg_pm_notification+0x49/0x180 drivers/net/wireguard/device.c:64 notifier_call_chain+0xb7/0x410 kernel/notifier.c:85 notifier_call_chain_robust kernel/notifier.c:120 [inline] blocking_notifier_call_chain_robust kernel/notifier.c:345 [inline] blocking_notifier_call_chain_robust+0xc9/0x170 kernel/notifier.c:333 pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102 snapshot_open+0x189/0x2b0 kernel/power/user.c:77 misc_open+0x35a/0x420 drivers/char/misc.c:179 chrdev_open+0x237/0x6a0 fs/char_dev.c:414 do_dentry_open+0x735/0x1c40 fs/open.c:956 vfs_open+0x82/0x3f0 fs/open.c:1086 do_open fs/namei.c:3830 [inline] path_openat+0x1e88/0x2d80 fs/namei.c:3989 do_filp_open+0x20c/0x470 fs/namei.c:4016 do_sys_openat2+0x17a/0x1e0 fs/open.c:1428 do_sys_open fs/open.c:1443 [inline] __do_sys_openat fs/open.c:1459 [inline] __se_sys_openat fs/open.c:1454 [inline] __x64_sys_openat+0x175/0x210 fs/open.c:1454 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #1 ((pm_chain_head).rwsem){++++}-{4:4}: down_read+0x9a/0x330 kernel/locking/rwsem.c:1524 blocking_notifier_call_chain_robust kernel/notifier.c:344 [inline] blocking_notifier_call_chain_robust+0xa9/0x170 kernel/notifier.c:333 pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102 snapshot_open+0x189/0x2b0 kernel/power/user.c:77 misc_open+0x35a/0x420 drivers/char/misc.c:179 chrdev_open+0x237/0x6a0 fs/char_dev.c:414 do_dentry_open+0x735/0x1c40 fs/open.c:956 vfs_open+0x82/0x3f0 fs/open.c:1086 do_open fs/namei.c:3830 [inline] path_openat+0x1e88/0x2d80 fs/namei.c:3989 do_filp_open+0x20c/0x470 fs/namei.c:4016 do_sys_openat2+0x17a/0x1e0 fs/open.c:1428 do_sys_open fs/open.c:1443 [inline] __do_sys_openat fs/open.c:1459 [inline] __se_sys_openat fs/open.c:1454 [inline] __x64_sys_openat+0x175/0x210 fs/open.c:1454 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f -> #0 (system_transition_mutex){+.+.}-{4:4}: check_prev_add kernel/locking/lockdep.c:3163 [inline] check_prevs_add kernel/locking/lockdep.c:3282 [inline] validate_chain kernel/locking/lockdep.c:3906 [inline] __lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851 __mutex_lock_common kernel/locking/mutex.c:585 [inline] __mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730 lock_system_sleep+0x87/0xa0 kernel/power/main.c:56 hibernate_compressor_param_set+0x1c/0x210 kernel/power/hibernate.c:1452 param_attr_store+0x18f/0x300 kernel/params.c:588 module_attr_store+0x55/0x80 kernel/params.c:924 sysfs_kf_write+0x117/0x170 fs/sysfs/file.c:139 kernfs_fop_write_iter+0x33d/0x500 fs/kernfs/file.c:334 new_sync_write fs/read_write.c:586 [inline] vfs_write+0x5ae/0x1150 fs/read_write.c:679 ksys_write+0x12b/0x250 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f other info that might help us debug this: Chain exists of: system_transition_mutex --> rtnl_mutex --> param_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(param_lock); lock(rtnl_mutex); lock(param_lock); lock(system_transition_mutex); *** DEADLOCK *** Reported-by: syzbot+ace60642828c074eb913@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ace60642828c074eb913 Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com> Link: https://patch.msgid.link/20250224013139.3994500-1-lizhi.xu@windriver.com [ rjw: New subject matching the code changes, changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
1618f635bd |
PM: EM: use kfree_rcu() to simplify the code
The callback function of call_rcu() just calls kfree(), so use kfree_rcu() instead of call_rcu() + callback function. Signed-off-by: Li RongQing <lirongqing@baidu.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/20250218082021.2766-1-lirongqing@baidu.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
a8e62726ac |
PM: EM: Slightly reduce em_check_capacity_update() overhead
Every iteration of the loop over all possible CPUs in em_check_capacity_update() causes get_cpu_device() to be called twice for the same CPU, once indirectly via em_cpu_get() and once directly. Get rid of the indirect get_cpu_device() call by moving the direct invocation of it earlier and using em_pd_get() instead of em_cpu_get() to get a pd pointer for the dev one returned by it. This also exposes the fact that dev is needed to get a pd, so the code becomes somewhat easier to follow after it. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/1925950.tdWV9SEqCh@rjwysocki.net |
||
![]() |
5fad775d43 |
PM: EM: Drop unused parameter from em_adjust_new_capacity()
The max_cap parameter is never used in em_adjust_new_capacity(), so drop it. No functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/2369979.ElGaqSPkdT@rjwysocki.net |
||
![]() |
d42044aad6 |
PM: hibernate: Replace deprecated kmap_atomic() with kmap_local_page()
kmap_atomic() is deprecated and should be replaced with kmap_local_page() [1][2]. kmap_local_page() is faster in kernels with HIGHMEM enabled, can take page faults, and allows preemption. According to [2], this replacement is safe as long as the code between kmap_atomic() and kunmap_atomic() does not implicitly depend on disabling page faults or preemption. In all of the call sites in this patch, the only thing happening between mapping and unmapping pages is copy_page() calls, and I don't suspect they depend on disabling page faults or preemption. Link: https://lwn.net/Articles/836144/ [1] Link: https://docs.kernel.org/mm/highmem.html#temporary-virtual-mappings [2] Signed-off-by: David Reaver <me@davidreaver.com> Link: https://patch.msgid.link/20250112152658.20132-1-me@davidreaver.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
f55b0671e3 |
More power management updates for 6.14-rc1
- Add missing error handling for syscore_suspend() to the hibernation core code (Wentao Liang). - Revert a commit that added unused macros (Andy Shevchenko). - Synchronize the runtime PM status of devices that were runtime- suspended before a system-wide suspend and need to be resumed during the subsequent system-wide resume transition (Rafael Wysocki). - Clean up the teo cpuidle governor and make the handling of short idle intervals in it consistent regardless of the properties of idle states supplied by the cpuidle driver (Rafael Wysocki). - Fix some boost-related issues in cpufreq (Lifeng Zheng). - Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh Kumar). - Remove unconditional binding of schedutil governor kthreads to the affected CPUs if the cpufreq driver indicates that updates can happen from any CPU (Christian Loehle). -----BEGIN PGP SIGNATURE----- iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmeb5xYSHHJqd0Byand5 c29ja2kubmV0AAoJEILEb/54YlRxcFsP/2FIoEI2G6J7pk8zChWT225qkkaieh5P tHIkcFINlgzyjLnqmyWELUdt+sB7re6/dMmoLor+abudHimvBvUfAj6Oiz1F3p2F utE9TpfhOkXi1ci5zBl9h6+iDj2Z5op3Qe/qw/W3DTlcManAD+6r60A2tOEy0jhi GTbp2SEEU28+LU/2J59IfxEuRTTH4pbQGXi+iKv/k9bmtLvQofa1saXyQCBSZrvO z3MBdqnAxLeZCg/qILmEGsBvbv1wpugvp3yoMLVwGNyul12Augcs8PreQz7e5tFq spEuCfpBJwyJLAGlOnjOYgsPbJBXWRkIBeLH7JealfZr9TX0y4LZSAHi/xe0Asd3 BBZLLDojxhYMLzmqSkuafHlQd5J7jKl++RS1A9Qm6aqglKjeSOC9Ca9fmrc9Ub9P Jpf1SVJ3kJsv1Z7wuUcaj6oLxD8wlAgCo5pigNgWTP2HllhP2bmc22M8JWxpAz+m nMeW8nr8bAu4XViZeb74YKGgUDngO/uKRwBpthSkE2fqM7q0Wr5E7G0u9M91mzG6 nd/XDwta5TeznMQpSy339NgT61i4HHfyc/SDIdpkBxI0C5l6jknNawq79i9gy7/E In4MyooOlls/iX/JR0uxx2hXEByltF0IHqwsRYeJ6dmIajYgASXR1Hhh5Iy9fPJ/ JTJ7vR5oZPB/ =EgsM -----END PGP SIGNATURE----- Merge tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "These are mostly fixes on top of the previously merged power management material with the addition of some teo cpuidle governor updates, some of which may also be regarded as fixes: - Add missing error handling for syscore_suspend() to the hibernation core code (Wentao Liang) - Revert a commit that added unused macros (Andy Shevchenko) - Synchronize the runtime PM status of devices that were runtime- suspended before a system-wide suspend and need to be resumed during the subsequent system-wide resume transition (Rafael Wysocki) - Clean up the teo cpuidle governor and make the handling of short idle intervals in it consistent regardless of the properties of idle states supplied by the cpuidle driver (Rafael Wysocki) - Fix some boost-related issues in cpufreq (Lifeng Zheng) - Fix build issues in the s3c64xx and airoha cpufreq drivers (Viresh Kumar) - Remove unconditional binding of schedutil governor kthreads to the affected CPUs if the cpufreq driver indicates that updates can happen from any CPU (Christian Loehle)" * tag 'pm-6.14-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: sleep: core: Synchronize runtime PM status of parents and children cpufreq: airoha: Depends on OF PM: Revert "Add EXPORT macros for exporting PM functions" PM: hibernate: Add error handling for syscore_suspend() cpufreq/schedutil: Only bind threads if needed cpufreq: ACPI: Remove set_boost in acpi_cpufreq_cpu_init() cpufreq: CPPC: Fix wrong max_freq in policy initialization cpufreq: Introduce a more generic way to set default per-policy boost flag cpufreq: Fix re-boost issue after hotplugging a CPU cpufreq: s3c64xx: Fix compilation warning cpuidle: teo: Skip sleep length computation for low latency constraints cpuidle: teo: Replace time_span_ns with a flag cpuidle: teo: Simplify handling of total events count cpuidle: teo: Skip getting the sleep length if wakeups are very frequent cpuidle: teo: Simplify counting events used for tick management cpuidle: teo: Clarify two code comments cpuidle: teo: Drop local variable prev_intercept_idx cpuidle: teo: Combine candidate state index checks against 0 cpuidle: teo: Reorder candidate state index checks cpuidle: teo: Rearrange idle state lookup code |
||
![]() |
9c5968db9e |
The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec. - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones. - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest. - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code. - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups. - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code. - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c. - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator. - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading. - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated (https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/). Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED). - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled. - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL. - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests. - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size. - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic. - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated. - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated. - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed. - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic. - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy. - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic. - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions. - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed. - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting. - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface. - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior. - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi "introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors." - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram. - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal. - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance. - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation. - "Cleanup for memfd_create()" from Isaac Manjarres does that thing. - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration. - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices. - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5a+cwAKCRDdBJ7gKXxA jtoyAP9R58oaOKPJuTizEKKXvh/RpMyD6sYcz/uPpnf+cKTZxQEAqfVznfWlw/Lz uC3KRZYhmd5YrxU4o+qjbzp9XWX/xAE= =Ib2s -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: "The various patchsets are summarized below. Plus of course many indivudual patches which are described in their changelogs. - "Allocate and free frozen pages" from Matthew Wilcox reorganizes the page allocator so we end up with the ability to allocate and free zero-refcount pages. So that callers (ie, slab) can avoid a refcount inc & dec - "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use large folios other than PMD-sized ones - "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and fixes for this small built-in kernel selftest - "mas_anode_descend() related cleanup" from Wei Yang tidies up part of the mapletree code - "mm: fix format issues and param types" from Keren Sun implements a few minor code cleanups - "simplify split calculation" from Wei Yang provides a few fixes and a test for the mapletree code - "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes continues the work of moving vma-related code into the (relatively) new mm/vma.c - "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David Hildenbrand cleans up and rationalizes handling of gfp flags in the page allocator - "readahead: Reintroduce fix for improper RA window sizing" from Jan Kara is a second attempt at fixing a readahead window sizing issue. It should reduce the amount of unnecessary reading - "synchronously scan and reclaim empty user PTE pages" from Qi Zheng addresses an issue where "huge" amounts of pte pagetables are accumulated: https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/ Qi's series addresses this windup by synchronously freeing PTE memory within the context of madvise(MADV_DONTNEED) - "selftest/mm: Remove warnings found by adding compiler flags" from Muhammad Usama Anjum fixes some build warnings in the selftests code when optional compiler warnings are enabled - "mm: don't use __GFP_HARDWALL when migrating remote pages" from David Hildenbrand tightens the allocator's observance of __GFP_HARDWALL - "pkeys kselftests improvements" from Kevin Brodsky implements various fixes and cleanups in the MM selftests code, mainly pertaining to the pkeys tests - "mm/damon: add sample modules" from SeongJae Park enhances DAMON to estimate application working set size - "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn provides some cleanups to memcg's hugetlb charging logic - "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based kernel build was demonstrated - "zram: split page type read/write handling" from Sergey Senozhatsky has several fixes and cleaups for zram in the area of zram_write_page(). A watchdog softlockup warning was eliminated - "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky cleans up the pagetable destructor implementations. A rare use-after-free race is fixed - "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes simplifies and cleans up the debugging code in the VMA merging logic - "Account page tables at all levels" from Kevin Brodsky cleans up and regularizes the pagetable ctor/dtor handling. This results in improvements in accounting accuracy - "mm/damon: replace most damon_callback usages in sysfs with new core functions" from SeongJae Park cleans up and generalizes DAMON's sysfs file interface logic - "mm/damon: enable page level properties based monitoring" from SeongJae Park increases the amount of information which is presented in response to DAMOS actions - "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs is completed - "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter Xu cleans up and generalizes the hugetlb reservation accounting - "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino removes a never-used feature of the alloc_pages_bulk() interface - "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park extends DAMOS filters to support not only exclusion (rejecting), but also inclusion (allowing) behavior - "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi introduces a new memory descriptor for zswap.zpool that currently overlaps with struct page for now. This is part of the effort to reduce the size of struct page and to enable dynamic allocation of memory descriptors - "mm, swap: rework of swap allocator locks" from Kairui Song redoes and simplifies the swap allocator locking. A speedup of 400% was demonstrated for one workload. As was a 35% reduction for kernel build time with swap-on-zram - "mm: update mips to use do_mmap(), make mmap_region() internal" from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that mmap_region() can be made MM-internal - "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU regressions and otherwise improves MGLRU performance - "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park updates DAMON documentation - "Cleanup for memfd_create()" from Isaac Manjarres does that thing - "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand provides various cleanups in the areas of hugetlb folios, THP folios and migration - "Uncached buffered IO" from Jens Axboe implements the new RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache reading and writing. To permite userspace to address issues with massive buildup of useless pagecache when reading/writing fast devices - "selftests/mm: virtual_address_range: Reduce memory" from Thomas Weißschuh fixes and optimizes some of the MM selftests" * tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits) mm/compaction: fix UBSAN shift-out-of-bounds warning s390/mm: add missing ctor/dtor on page table upgrade kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags() tools: add VM_WARN_ON_VMG definition mm/damon/core: use str_high_low() helper in damos_wmark_wait_us() seqlock: add missing parameter documentation for raw_seqcount_try_begin() mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh mm/page_alloc: remove the incorrect and misleading comment zram: remove zcomp_stream_put() from write_incompressible_page() mm: separate move/undo parts from migrate_pages_batch() mm/kfence: use str_write_read() helper in get_access_type() selftests/mm/mkdirty: fix memory leak in test_uffdio_copy() kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags() selftests/mm: virtual_address_range: avoid reading from VM_IO mappings selftests/mm: vm_util: split up /proc/self/smaps parsing selftests/mm: virtual_address_range: unmap chunks after validation selftests/mm: virtual_address_range: mmap() without PROT_WRITE selftests/memfd/memfd_test: fix possible NULL pointer dereference mm: add FGP_DONTCACHE folio creation flag mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue ... |
||
![]() |
c6f239796b |
mm/memblock: add memblock_alloc_or_panic interface
Before SLUB initialization, various subsystems used memblock_alloc to allocate memory. In most cases, when memory allocation fails, an immediate panic is required. To simplify this behavior and reduce repetitive checks, introduce `memblock_alloc_or_panic`. This function ensures that memory allocation failures result in a panic automatically, improving code readability and consistency across subsystems that require this behavior. [guoweikang.kernel@gmail.com: arch/s390: save_area_alloc default failure behavior changed to panic] Link: https://lkml.kernel.org/r/20250109033136.2845676-1-guoweikang.kernel@gmail.com Link: https://lore.kernel.org/lkml/Z2fknmnNtiZbCc7x@kernel.org/ Link: https://lkml.kernel.org/r/20250102072528.650926-1-guoweikang.kernel@gmail.com Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390] Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
![]() |
e20a70c572 |
PM: hibernate: Add error handling for syscore_suspend()
In hibernation_platform_enter(), the code did not check the
return value of syscore_suspend(), potentially leading to a
situation where syscore_resume() would be called even if
syscore_suspend() failed. This could cause unpredictable
behavior or system instability.
Modify the code sequence in question to properly handle errors returned
by syscore_suspend(). If an error occurs in the suspend path, the code
now jumps to label 'Enable_irqs' skipping the syscore_resume() call and
only enabling interrupts after setting the system state to SYSTEM_RUNNING.
Fixes:
|
||
![]() |
1225bb42b8 |
Merge branches 'pm-sleep', 'pm-cpuidle' and 'pm-em'
Merge updates related to system sleep, a cpuidle update and an Energy Model handling code update for 6.14-rc1: - Allow configuring the system suspend-resume (DPM) watchdog to warn earlier than panic (Douglas Anderson). - Implement devm_device_init_wakeup() helper and introduce a device- managed variant of dev_pm_set_wake_irq() (Joe Hattori, Peng Fan). - Remove direct inclusions of 'pm_wakeup.h' which should be only included via 'device.h' (Wolfram Sang). - Clean up two comments in the core system-wide PM code (Rafael Wysocki, Randy Dunlap). - Add Clearwater Forest processor support to the intel_idle cpuidle driver (Artem Bityutskiy). - Move sched domains rebuild function from the schedutil cpufreq governor to the Energy Model handling code (Rafael Wysocki). * pm-sleep: PM: sleep: wakeirq: Introduce device-managed variant of dev_pm_set_wake_irq() PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic PM: sleep: convert comment from kernel-doc to plain comment PM: wakeup: implement devm_device_init_wakeup() helper PM: sleep: sysfs: don't include 'pm_wakeup.h' directly PM: sleep: autosleep: don't include 'pm_wakeup.h' directly PM: sleep: Update stale comment in device_resume() * pm-cpuidle: intel_idle: add Clearwater Forest SoC support * pm-em: PM: EM: Move sched domains rebuild function from schedutil to EM |
||
![]() |
56cabb937f |
PM: sleep: Allow configuring the DPM watchdog to warn earlier than panic
Allow configuring the DPM watchdog to warn about slow suspend/resume functions without causing a system panic(). This allows you to set the DPM_WATCHDOG_WARNING_TIMEOUT to something like 5 or 10 seconds to get warnings about slow suspend/resume functions that eventually succeed. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://patch.msgid.link/20250109125957.v2.1.I4554f931b8da97948f308ecc651b124338ee9603@changeid [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
96484d21ae |
PM: sleep: convert comment from kernel-doc to plain comment
Modify a non-kernel-doc comment to begin with /* instead of /** so that it does not cause a kernel-doc warning. power.h:114: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst * Auxiliary structure used for reading the snapshot image data and power.h:114: warning: missing initial short description on line: * Auxiliary structure used for reading the snapshot image data and Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Pavel Machek <pavel@ucw.cz> Link: https://patch.msgid.link/20250111063107.910825-1-rdunlap@infradead.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
ebeeee390b |
PM: EM: Move sched domains rebuild function from schedutil to EM
Function sugov_eas_rebuild_sd() defined in the schedutil cpufreq governor implements generic functionality that may be useful in other places. In particular, there is a plan to use it in the intel_pstate driver in the future. For this reason, move it from schedutil to the energy model code and rename it to em_rebuild_sched_domains(). This also helps to get rid of some #ifdeffery in schedutil which is a plus. No intentional functional impact. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> |
||
![]() |
d6482311ef |
PM: sleep: autosleep: don't include 'pm_wakeup.h' directly
The header clearly states that it does not want to be included directly, only via 'device.h'. 'platform_device.h' works equally well. Remove the direct inclusion. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://patch.msgid.link/20241118072917.3853-16-wsa+renesas@sang-engineering.com [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
9f16d5e6f2 |
The biggest change here is eliminating the awful idea that KVM had, of
essentially guessing which pfns are refcounted pages. The reason to do so was that KVM needs to map both non-refcounted pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain refcounted pages. However, the result was security issues in the past, and more recently the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by struct page but is not refcounted. In particular this broke virtio-gpu blob resources (which directly map host graphics buffers into the guest as "vram" for the virtio-gpu device) with the amdgpu driver, because amdgpu allocates non-compound higher order pages and the tail pages could not be mapped into KVM. This requires adjusting all uses of struct page in the per-architecture code, to always work on the pfn whenever possible. The large series that did this, from David Stevens and Sean Christopherson, also cleaned up substantially the set of functions that provided arch code with the pfn for a host virtual addresses. The previous maze of twisty little passages, all different, is replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages) saving almost 200 lines of code. ARM: * Support for stage-1 permission indirection (FEAT_S1PIE) and permission overlays (FEAT_S1POE), including nested virt + the emulated page table walker * Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call was introduced in PSCIv1.3 as a mechanism to request hibernation, similar to the S4 state in ACPI * Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As part of it, introduce trivial initialization of the host's MPAM context so KVM can use the corresponding traps * PMU support under nested virtualization, honoring the guest hypervisor's trap configuration and event filtering when running a nested guest * Fixes to vgic ITS serialization where stale device/interrupt table entries are not zeroed when the mapping is invalidated by the VM * Avoid emulated MMIO completion if userspace has requested synchronous external abort injection * Various fixes and cleanups affecting pKVM, vCPU initialization, and selftests LoongArch: * Add iocsr and mmio bus simulation in kernel. * Add in-kernel interrupt controller emulation. * Add support for virtualization extensions to the eiointc irqchip. PPC: * Drop lingering and utterly obsolete references to PPC970 KVM, which was removed 10 years ago. * Fix incorrect documentation references to non-existing ioctls RISC-V: * Accelerate KVM RISC-V when running as a guest * Perf support to collect KVM guest statistics from host side s390: * New selftests: more ucontrol selftests and CPU model sanity checks * Support for the gen17 CPU model * List registers supported by KVM_GET/SET_ONE_REG in the documentation x86: * Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve documentation, harden against unexpected changes. Even if the hardware A/D tracking is disabled, it is possible to use the hardware-defined A/D bits to track if a PFN is Accessed and/or Dirty, and that removes a lot of special cases. * Elide TLB flushes when aging secondary PTEs, as has been done in x86's primary MMU for over 10 years. * Recover huge pages in-place in the TDP MMU when dirty page logging is toggled off, instead of zapping them and waiting until the page is re-accessed to create a huge mapping. This reduces vCPU jitter. * Batch TLB flushes when dirty page logging is toggled off. This reduces the time it takes to disable dirty logging by ~3x. * Remove the shrinker that was (poorly) attempting to reclaim shadow page tables in low-memory situations. * Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE. * Advertise CPUIDs for new instructions in Clearwater Forest * Quirk KVM's misguided behavior of initialized certain feature MSRs to their maximum supported feature set, which can result in KVM creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero value results in the vCPU having invalid state if userspace hides PDCM from the guest, which in turn can lead to save/restore failures. * Fix KVM's handling of non-canonical checks for vCPUs that support LA57 to better follow the "architecture", in quotes because the actual behavior is poorly documented. E.g. most MSR writes and descriptor table loads ignore CR4.LA57 and operate purely on whether the CPU supports LA57. * Bypass the register cache when querying CPL from kvm_sched_out(), as filling the cache from IRQ context is generally unsafe; harden the cache accessors to try to prevent similar issues from occuring in the future. The issue that triggered this change was already fixed in 6.12, but was still kinda latent. * Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM over-advertises SPEC_CTRL when trying to support cross-vendor VMs. * Minor cleanups * Switch hugepage recovery thread to use vhost_task. These kthreads can consume significant amounts of CPU time on behalf of a VM or in response to how the VM behaves (for example how it accesses its memory); therefore KVM tried to place the thread in the VM's cgroups and charge the CPU time consumed by that work to the VM's container. However the kthreads did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM instances inside could not complete freezing. Fix this by replacing the kthread with a PF_USER_WORKER thread, via the vhost_task abstraction. Another 100+ lines removed, with generally better behavior too like having these threads properly parented in the process tree. * Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't really work; there was really nothing to work around anyway: the broken patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the erratum. * Fix 6.12 regression where CONFIG_KVM will be built as a module even if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'. x86 selftests: * x86 selftests can now use AVX. Documentation: * Use rST internal links * Reorganize the introduction to the API document Generic: * Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead of RCU, so that running a vCPU on a different task doesn't encounter long due to having to wait for all CPUs become quiescent. In general both reads and writes are rare, but userspace that supports confidential computing is introducing the use of "helper" vCPUs that may jump from one host processor to another. Those will be very happy to trigger a synchronize_rcu(), and the effect on performance is quite the disaster. -----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmc9MRYUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroP00QgArxqxBIGLCW5t7bw7vtNq63QYRyh4 dTiDguLiYQJ+AXmnRu11R6aPC7HgMAvlFCCmH+GEce4WEgt26hxCmncJr/aJOSwS letCS7TrME16PeZvh25A1nhPBUw6mTF1qqzgcdHMrqXG8LuHoGcKYGSRVbkf3kfI 1ZoMq1r8ChXbVVmCx9DQ3gw1TVr5Dpjs2voLh8rDSE9Xpw0tVVabHu3/NhQEz/F+ t8/nRaqH777icCHIf9PCk5HnarHxLAOvhM2M0Yj09PuBcE5fFQxpxltw/qiKQqqW ep4oquojGl87kZnhlDaac2UNtK90Ws+WxxvCwUmbvGN0ZJVaQwf4FvTwig== =lWpE -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm updates from Paolo Bonzini: "The biggest change here is eliminating the awful idea that KVM had of essentially guessing which pfns are refcounted pages. The reason to do so was that KVM needs to map both non-refcounted pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP VMAs that contain refcounted pages. However, the result was security issues in the past, and more recently the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by struct page but is not refcounted. In particular this broke virtio-gpu blob resources (which directly map host graphics buffers into the guest as "vram" for the virtio-gpu device) with the amdgpu driver, because amdgpu allocates non-compound higher order pages and the tail pages could not be mapped into KVM. This requires adjusting all uses of struct page in the per-architecture code, to always work on the pfn whenever possible. The large series that did this, from David Stevens and Sean Christopherson, also cleaned up substantially the set of functions that provided arch code with the pfn for a host virtual addresses. The previous maze of twisty little passages, all different, is replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the non-__ versions of these two, and kvm_prefetch_pages) saving almost 200 lines of code. ARM: - Support for stage-1 permission indirection (FEAT_S1PIE) and permission overlays (FEAT_S1POE), including nested virt + the emulated page table walker - Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call was introduced in PSCIv1.3 as a mechanism to request hibernation, similar to the S4 state in ACPI - Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As part of it, introduce trivial initialization of the host's MPAM context so KVM can use the corresponding traps - PMU support under nested virtualization, honoring the guest hypervisor's trap configuration and event filtering when running a nested guest - Fixes to vgic ITS serialization where stale device/interrupt table entries are not zeroed when the mapping is invalidated by the VM - Avoid emulated MMIO completion if userspace has requested synchronous external abort injection - Various fixes and cleanups affecting pKVM, vCPU initialization, and selftests LoongArch: - Add iocsr and mmio bus simulation in kernel. - Add in-kernel interrupt controller emulation. - Add support for virtualization extensions to the eiointc irqchip. PPC: - Drop lingering and utterly obsolete references to PPC970 KVM, which was removed 10 years ago. - Fix incorrect documentation references to non-existing ioctls RISC-V: - Accelerate KVM RISC-V when running as a guest - Perf support to collect KVM guest statistics from host side s390: - New selftests: more ucontrol selftests and CPU model sanity checks - Support for the gen17 CPU model - List registers supported by KVM_GET/SET_ONE_REG in the documentation x86: - Cleanup KVM's handling of Accessed and Dirty bits to dedup code, improve documentation, harden against unexpected changes. Even if the hardware A/D tracking is disabled, it is possible to use the hardware-defined A/D bits to track if a PFN is Accessed and/or Dirty, and that removes a lot of special cases. - Elide TLB flushes when aging secondary PTEs, as has been done in x86's primary MMU for over 10 years. - Recover huge pages in-place in the TDP MMU when dirty page logging is toggled off, instead of zapping them and waiting until the page is re-accessed to create a huge mapping. This reduces vCPU jitter. - Batch TLB flushes when dirty page logging is toggled off. This reduces the time it takes to disable dirty logging by ~3x. - Remove the shrinker that was (poorly) attempting to reclaim shadow page tables in low-memory situations. - Clean up and optimize KVM's handling of writes to MSR_IA32_APICBASE. - Advertise CPUIDs for new instructions in Clearwater Forest - Quirk KVM's misguided behavior of initialized certain feature MSRs to their maximum supported feature set, which can result in KVM creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to a non-zero value results in the vCPU having invalid state if userspace hides PDCM from the guest, which in turn can lead to save/restore failures. - Fix KVM's handling of non-canonical checks for vCPUs that support LA57 to better follow the "architecture", in quotes because the actual behavior is poorly documented. E.g. most MSR writes and descriptor table loads ignore CR4.LA57 and operate purely on whether the CPU supports LA57. - Bypass the register cache when querying CPL from kvm_sched_out(), as filling the cache from IRQ context is generally unsafe; harden the cache accessors to try to prevent similar issues from occuring in the future. The issue that triggered this change was already fixed in 6.12, but was still kinda latent. - Advertise AMD_IBPB_RET to userspace, and fix a related bug where KVM over-advertises SPEC_CTRL when trying to support cross-vendor VMs. - Minor cleanups - Switch hugepage recovery thread to use vhost_task. These kthreads can consume significant amounts of CPU time on behalf of a VM or in response to how the VM behaves (for example how it accesses its memory); therefore KVM tried to place the thread in the VM's cgroups and charge the CPU time consumed by that work to the VM's container. However the kthreads did not process SIGSTOP/SIGCONT, and therefore cgroups which had KVM instances inside could not complete freezing. Fix this by replacing the kthread with a PF_USER_WORKER thread, via the vhost_task abstraction. Another 100+ lines removed, with generally better behavior too like having these threads properly parented in the process tree. - Revert a workaround for an old CPU erratum (Nehalem/Westmere) that didn't really work; there was really nothing to work around anyway: the broken patch was meant to fix nested virtualization, but the PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the erratum. - Fix 6.12 regression where CONFIG_KVM will be built as a module even if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is 'y'. x86 selftests: - x86 selftests can now use AVX. Documentation: - Use rST internal links - Reorganize the introduction to the API document Generic: - Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock instead of RCU, so that running a vCPU on a different task doesn't encounter long due to having to wait for all CPUs become quiescent. In general both reads and writes are rare, but userspace that supports confidential computing is introducing the use of "helper" vCPUs that may jump from one host processor to another. Those will be very happy to trigger a synchronize_rcu(), and the effect on performance is quite the disaster" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits) KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD KVM: x86: add back X86_LOCAL_APIC dependency Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()" KVM: x86: switch hugepage recovery thread to vhost_task KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest Documentation: KVM: fix malformed table irqchip/loongson-eiointc: Add virt extension support LoongArch: KVM: Add irqfd support LoongArch: KVM: Add PCHPIC user mode read and write functions LoongArch: KVM: Add PCHPIC read and write functions LoongArch: KVM: Add PCHPIC device support LoongArch: KVM: Add EIOINTC user mode read and write functions LoongArch: KVM: Add EIOINTC read and write functions LoongArch: KVM: Add EIOINTC device support LoongArch: KVM: Add IPI user mode read and write function LoongArch: KVM: Add IPI read and write function LoongArch: KVM: Add IPI device support LoongArch: KVM: Add iocsr and mmio bus simulation in kernel KVM: arm64: Pass on SVE mapping failures ... |
||
![]() |
5609296750 |
PM: EM: Add min/max available performance state limits
On some devices there are HW dependencies for shared frequency and voltage between devices. It will impact Energy Aware Scheduler (EAS) decision, where CPUs share the voltage & frequency domain with other CPUs or devices e.g. - Mid CPUs + Big CPU - Little CPU + L3 cache in DSU - some other device + Little CPUs Detailed explanation of one example: When the L3 cache frequency is increased, the affected Little CPUs might run at higher voltage and frequency. That higher voltage causes higher CPU power and thus more energy is used for running the tasks. This is important for background running tasks, which try to run on energy efficient CPUs. Therefore, add performance state limits which are applied for the device (in this case CPU). This is important on SoCs with HW dependencies mentioned above so that the Energy Aware Scheduler (EAS) does not use performance states outside the valid min-max range for energy calculation. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://patch.msgid.link/20241030164126.1263793-2-lukasz.luba@arm.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
![]() |
3e251afaec |
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function
which is analogous to ACPI S4 state. This will allow hosting
environments to determine that a guest is hibernated rather than just
powered off, and handle that state appropriately on subsequent launches.
Since commit
|