In future we will want to be able to check if specifically HW offload-based
atomic writes are possible, so rename xfs_inode_can_atomicwrite() ->
xfs_inode_can_hw_atomicwrite().
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[djwong: add an underscore to be consistent with everything else]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
It's silly to call xfs_setsize_buftarg from xfs_alloc_buftarg with the
block device LBA size because we don't need to ask the block layer to
validate a geometry number that it provided us. Instead, set the
preliminary bt_meta_sector* fields to the LBA size in preparation for
reading the primary super.
However, we still want to flush and invalidate the pagecache for all
three block devices before we start reading metadata from those devices,
so call sync_blockdev() per bdev in xfs_alloc_buftarg().
This will enable a subsequent patch to validate hw atomic write geometry
against the filesystem geometry.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
[jpg: call sync_blockdev() from xfs_alloc_buftarg()]
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
XFS will be able to support large atomic writes (atomic write > 1x block)
in future. This will be achieved by using different operating methods,
depending on the size of the write.
Specifically a new method of operation based in FS atomic extent remapping
will be supported in addition to the current HW offload-based method.
The FS method will generally be appreciably slower performing than the
HW-offload method. However the FS method will be typically able to
contribute to achieving a larger atomic write unit max limit.
XFS will support a hybrid mode, where HW offload method will be used when
possible, i.e. HW offload is used when the length of the write is
supported, and for other times FS-based atomic writes will be used.
As such, there is an atomic write length at which the user may experience
appreciably slower performance.
Advertise this limit in a new statx field, stx_atomic_write_unit_max_opt.
When zero, it means that there is no such performance boundary.
Masks STATX{_ATTR}_WRITE_ATOMIC can be used to get this new field. This is
ok for older kernels which don't support this new field, as they would
report 0 in this field (from zeroing in cp_statx()) already. Furthermore
those older kernels don't support large atomic writes - apart from block
fops, but there would be consistent performance there for atomic writes
in range [unit min, unit max].
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Use the bio_add_virt_nofail and bio_add_vmalloc helpers to abstract
away the details of the memory allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-18-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Delegate to bdev_rw_virt when operating on non-vmalloc memory and use
bio_add_vmalloc_chunk to insulate xfs from the details of adding vmalloc
memory to a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the __bio_add_page(..., virt_to_page(), ...) pattern to the
bio_add_virt_nofail helper implementing it and use bio_add_vmalloc
to insulate xfs from the details of adding vmalloc memory to a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20250507120451.4000627-16-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When running fstrim immediately after mounting a V4 filesystem,
the fstrim fails to trim all the free space in the filesystem. It
only trims the first extent in the by-size free space tree in each
AG and then returns. If a second fstrim is then run, it runs
correctly and the entire free space in the filesystem is iterated
and discarded correctly.
The problem lies in the setup of the trim cursor - it assumes that
pag->pagf_longest is valid without either reading the AGF first or
checking if xfs_perag_initialised_agf(pag) is true or not.
As a result, when a filesystem is mounted without reading the AGF
(e.g. a clean mount on a v4 filesystem) and the first operation is a
fstrim call, pag->pagf_longest is zero and so the free extent search
starts at the wrong end of the by-size btree and exits after
discarding the first record in the tree.
Fix this by deferring the initialisation of tcur->count to after
we have locked the AGF and guaranteed that the perag is properly
initialised. We trigger this on tcur->count == 0 after locking the
AGF, as this will only occur on the first call to
xfs_trim_gather_extents() for each AG. If we need to iterate,
tcur->count will be set to the length of the record we need to
restart at, so we can use this to ensure we only sample a valid
pag->pagf_longest value for the iteration.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Fixes: 89cfa89960 ("xfs: reduce AGF hold times during fstrim operations")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Allow read-only mounts on rtdevs and logdevs that are marked as
read-only and make sure those mounts can't be remounted read-write.
Use the sb_open_mode helper to make sure that we don't try to open
devices with write access enabled for read-only mounts.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
XFS has its own buffer cache for metadata that uses submit_bio, which
means that it no longer uses the block device pagecache for anything.
Create a more lightweight helper that runs the blocksize checks and
flushes dirty data and use that instead. No more truncating the
pagecache because XFS does not use it or care about it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_zoned_need_gc makes use of mult_frac() to calculate the threshold
for triggering the zoned garbage collector, but, turns out mult_frac()
doesn't properly work with 64-bit data types and this caused build
failures on some 32-bit architectures.
Fix this by essentially open coding mult_frac() in a 64-bit friendly
way.
Notice we don't need to bother with counters underflow here because
xfs_estimate_freecounter() will always return a positive value, as it
leverages percpu_counter_read_positive to read such counters.
Fixes: 845abeb1f0 ("xfs: add tunable threshold parameter for triggering zone GC")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504181233.F7D9Atra-lkp@intel.com/
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Filesystems with an internal zoned rt section use xfs_rtblock_t values
that are relative to the start of the data device. When fsmap reports
on internal rt sections, it reports the space used by the data section
as "OWN_FS".
Unfortunately, the logic for resuming a query isn't quite right, so
xfs/273 fails because it stress-tests GETFSMAP with a single-record
buffer. If we enter the "report fake space as OWN_FS" block with a
nonzero key[0].fmr_length, we should add that to key[0].fmr_physical
and recheck if we still need to emit the fake record. We should /not/
just return 0 from the whole function because that prevents all rmap
record iteration.
If we don't enter that block, the resumption is still wrong.
keys[*].fmr_physical is a reflection of what we copied out to userspace
on a previous query, which means that it already accounts for rgstart.
It is not correct to add rtstart_daddr when computing start_rtb or
end_rtb, so stop that.
While we're at it, add a xfs_has_zoned to make it clear that this is a
zoned filesystem thing.
Fixes: e50ec7fac8 ("xfs: enable fsmap reporting for internal RT devices")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There is a spelling mistake in fs/xfs/xfs_log.c. Fix it.
Signed-off-by: Zhang Xianwei <zhang.xianwei8@zte.com.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Prior to commit e614a00117, xmbuf_map_backing_mem relied on
folio_file_page to return the base page for the xmbuf's loff_t in the
xfile, and set b_addr to the page_address of that base page.
Now that folio_file_page has been removed from xmbuf_map_backing_mem, we
always set b_addr to the folio_address of the folio. This is correct
for the situation where the folio size matches the buffer size, but it's
totally wrong if tmpfs uses large folios. We need to use
offset_in_folio here.
Found via xfs/801, which demonstrated evidence of corruption of an
in-memory rmap btree block right after initializing an adjacent block.
Fixes: e614a00117 ("xfs: cleanup mapping tmpfs folios into the buffer cache")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Presently we start garbage collection late - when we start running
out of free zones to backfill max_open_zones. This is a reasonable
default as it minimizes write amplification. The longer we wait,
the more blocks are invalidated and reclaim cost less in terms
of blocks to relocate.
Starting this late however introduces a risk of GC being outcompeted
by user writes. If GC can't keep up, user writes will be forced to
wait for free zones with high tail latencies as a result.
This is not a problem under normal circumstances, but if fragmentation
is bad and user write pressure is high (multiple full-throttle
writers) we will "bottom out" of free zones.
To mitigate this, introduce a zonegc_low_space tunable that lets the
user specify a percentage of how much of the unused space that GC
should keep available for writing. A high value will reclaim more of
the space occupied by unused blocks, creating a larger buffer against
write bursts.
This comes at a cost as write amplification is increased. To
illustrate this using a sample workload, setting zonegc_low_space to
60% avoids high (500ms) max latencies while increasing write
amplification by 15%.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_buf_free can call vunmap, which can sleep. The vunmap path is an
unlikely one, so add might_sleep to ensure calling xfs_buf_free from
atomic context gets caught more easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Marking a log item as failed kept a buffer reference around for
resubmission of inode and dquote items.
For inode items commit 298f7bec50 ("xfs: pin inode backing buffer to
the inode log item") started pinning the inode item buffers
unconditionally and removed the need for this. Later commit acc8f8628c
("xfs: attach dquot buffer to dquot log item buffer") did the same for
dquot items but didn't fully clean up the xfs_clear_li_failed side
for them. Stop adding the extra pin for dquot items and remove the
helpers.
This happens to fix a call to xfs_buf_free with the AIL lock held,
which would be incorrect for the unlikely case freeing the buffer
ends up calling vfree.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
try_lookup_noperm() and d_hash_and_lookup() are nearly identical. The
former does some validation of the name where the latter doesn't.
Outside of the VFS that validation is likely valuable, and having only
one exported function for this task is certainly a good idea.
So make d_hash_and_lookup() local to VFS files and change all other
callers to try_lookup_noperm(). Note that the arguments are swapped.
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250319031545.2999807-6-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
The lookup_one_len family of functions is (now) only used internally by
a filesystem on itself either
- in a context where permission checking is irrelevant such as by a
virtual filesystem populating itself, or xfs accessing its ORPHANAGE
or dquota accessing the quota file; or
- in a context where a permission check (MAY_EXEC on the parent) has just
been performed such as a network filesystem finding in "silly-rename"
file in the same directory. This is also the context after the
_parentat() functions where currently lookup_one_qstr_excl() is used.
So the permission check is pointless.
The name "one_len" is unhelpful in understanding the purpose of these
functions and should be changed. Most of the callers pass the len as
"strlen()" so using a qstr and QSTR() can simplify the code.
This patch renames these functions (include lookup_positive_unlocked()
which is part of the family despite the name) to have a name based on
"lookup_noperm". They are changed to receive a 'struct qstr' instead
of separate name and len. In a few cases the use of QSTR() results in a
new call to strlen().
try_lookup_noperm() takes a pointer to a qstr instead of the whole
qstr. This is consistent with d_hash_and_lookup() (which is nearly
identical) and useful for lookup_noperm_unlocked().
The new lookup_noperm_common() doesn't take a qstr yet. That will be
tidied up in a subsequent patch.
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/r/20250319031545.2999807-5-neil@brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now that LIBCRC32C does nothing besides select CRC32, make every option
that selects LIBCRC32C instead select CRC32 directly. Then remove
LIBCRC32C.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-8-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCZ+Eg9QAKCRBcsMJ8RxYu
Y707AYCssAqTYkwPm937oACNbNpL3d2Q/3kP6ku+LmEZM+1HlD2K9cwsdqEWBcWw
oPA4ClwBgKP2dnn66oaaFSxEWMj/1evpbzAqptSKBJys83Ge7PFGiFG4Tyk7AUvl
kAc1FcIYrQ==
=9SdI
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.15-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Carlos Maiolino:
- XFS zoned allocator: Enables XFS to support zoned devices using its
real-time allocator
- Use folios/vmalloc for buffer cache backing memory
- Some code cleanups and bug fixes
* tag 'xfs-6.15-merge' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (70 commits)
xfs: remove the flags argument to xfs_buf_get_uncached
xfs: remove the flags argument to xfs_buf_read_uncached
xfs: remove xfs_buf_free_maps
xfs: remove xfs_buf_get_maps
xfs: call xfs_buf_alloc_backing_mem from _xfs_buf_alloc
xfs: remove unnecessary NULL check before kvfree()
xfs: don't wake zone space waiters without m_zone_info
xfs: don't increment m_generation for all errors in xfs_growfs_data
xfs: fix a missing unlock in xfs_growfs_data
xfs: Remove duplicate xfs_rtbitmap.h header
xfs: trigger zone GC when out of available rt blocks
xfs: trace what memory backs a buffer
xfs: cleanup mapping tmpfs folios into the buffer cache
xfs: use vmalloc instead of vm_map_area for buffer backing memory
xfs: buffer items don't straddle pages anymore
xfs: kill XBF_UNMAPPED
xfs: convert buffer cache to use high order folios
xfs: remove the kmalloc to page allocator fallback
xfs: refactor backing memory allocations for buffers
xfs: remove xfs_buf_is_vmapped
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90rxAAKCRCRxhvAZXjc
ooIPAQCwMjDjtWegvBy8kefiRw+fa4z3ZWHrwRT9DJrD/K9WyAD+JVd0ou27SVpQ
jKpRSRct2eTbyxdYiGydHQGm5F5sLg4=
=0FyQ
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.pagesize' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pagesize updates from Christian Brauner:
"This enables block sizes greater than the page size for block devices.
With this we can start supporting block devices with logical block
sizes larger than 4k.
It also allows to lift the device cache sector size support to 64k.
This allows filesystems which can use larger sector sizes up to 64k to
ensure that the filesystem will not generate writes that are smaller
than the specified sector size"
* tag 'vfs-6.15-rc1.pagesize' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
bdev: add back PAGE_SIZE block size validation for sb_set_blocksize()
bdev: use bdev_io_min() for statx block size
block/bdev: lift block size restrictions to 64k
block/bdev: enable large folio support for large logical block sizes
fs/buffer fs/mpage: remove large folio restriction
fs/mpage: use blocks_per_folio instead of blocks_per_page
fs/mpage: avoid negative shift for large blocksize
fs/buffer: remove batching from async read
fs/buffer: simplify block_read_full_folio() with bh_offset()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90rNwAKCRCRxhvAZXjc
onBJAP9Z8Ywmlb5KQ1E3HvDmkwyY6yOSyZ9/CmbzrkCJ8ywYkQD/d9/xt0EP/O/q
N8YtzXArHWt7u0YbcVpy9WK3F72BdwU=
=VJgY
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs async dir updates from Christian Brauner:
"This contains cleanups that fell out of the work from async directory
handling:
- Change kern_path_locked() and user_path_locked_at() to never return
a negative dentry. This simplifies the usability of these helpers
in various places
- Drop d_exact_alias() from the remaining place in NFS where it is
still used. This also allows us to drop the d_exact_alias() helper
completely
- Drop an unnecessary call to fh_update() from nfsd_create_locked()
- Change i_op->mkdir() to return a struct dentry
Change vfs_mkdir() to return a dentry provided by the filesystems
which is hashed and positive. This allows us to reduce the number
of cases where the resulting dentry is not positive to very few
cases. The code in these places becomes simpler and easier to
understand.
- Repack DENTRY_* and LOOKUP_* flags"
* tag 'vfs-6.15-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: fix inline emphasis warning
VFS: Change vfs_mkdir() to return the dentry.
nfs: change mkdir inode_operation to return alternate dentry if needed.
fuse: return correct dentry for ->mkdir
ceph: return the correct dentry on mkdir
hostfs: store inode in dentry after mkdir if possible.
Change inode_operations.mkdir to return struct dentry *
nfsd: drop fh_update() from S_IFDIR branch of nfsd_create_locked()
nfs/vfs: discard d_exact_alias()
VFS: add common error checks to lookup_one_qstr_excl()
VFS: change kern_path_locked() and user_path_locked_at() to never return negative dentry
VFS: repack LOOKUP_ bit flags.
VFS: repack DENTRY_ flags.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90rGwAKCRCRxhvAZXjc
okVnAP9VgaYjWGzaeep/dLzWtu7C/Cg5Swl1P84Vj+SJ+hFPEAD/auzWTV0D0Ko5
5GLyUsLZehfeVDOSRqmiyt1po8iVsQo=
=ANks
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs iomap updates from Christian Brauner:
- Allow the filesystem to submit the writeback bios.
- Allow the filsystem to track completions on a per-bio bases
instead of the entire I/O.
- Change writeback_ops so that ->submit_bio can be done by the
filesystem.
- A new ANON_WRITE flag for writes that don't have a block number
assigned to them at the iomap level leaving the filesystem to do
that work in the submission handler.
- Incremental iterator advance
The folio_batch support for zero range where the filesystem provides
a batch of folios to process that might not be logically continguous
requires more flexibility than the current offset based iteration
currently offers.
Update all iomap operations to advance the iterator within the
operation and thus remove the need to advance from the core iomap
iterator.
- Make buffered writes work with RWF_DONTCACHE
If RWF_DONTCACHE is set for a write, mark the folios being written as
uncached. On writeback completion the pages will be dropped.
- Introduce infrastructure for large atomic writes
This will eventually be used by xfs and ext4.
* tag 'vfs-6.15-rc1.iomap' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (42 commits)
iomap: rework IOMAP atomic flags
iomap: comment on atomic write checks in iomap_dio_bio_iter()
iomap: inline iomap_dio_bio_opflags()
iomap: fix inline data on buffered read
iomap: Lift blocksize restriction on atomic writes
iomap: Support SW-based atomic writes
iomap: Rename IOMAP_ATOMIC -> IOMAP_ATOMIC_HW
xfs: flag as supporting FOP_DONTCACHE
iomap: make buffered writes work with RWF_DONTCACHE
iomap: introduce a full map advance helper
iomap: rename iomap_iter processed field to status
iomap: remove unnecessary advance from iomap_iter()
dax: advance the iomap_iter on pte and pmd faults
dax: advance the iomap_iter on dedupe range
dax: advance the iomap_iter on unshare range
dax: advance the iomap_iter on zero range
dax: push advance down into dax_iomap_iter() for read and write
dax: advance the iomap_iter in the read/write path
iomap: convert misc simple ops to incremental advance
iomap: advance the iter on direct I/O
...
Flag IOMAP_ATOMIC_SW is not really required. The idea of having this flag
is that the FS ->iomap_begin callback could check if this flag is set to
decide whether to do a SW (FS-based) atomic write. But the FS can set
which ->iomap_begin callback it wants when deciding to do a FS-based
atomic write.
Furthermore, it was thought that IOMAP_ATOMIC_HW is not a proper name, as
the block driver can use SW-methods to emulate an atomic write. So change
back to IOMAP_ATOMIC.
The ->iomap_begin callback needs though to indicate to iomap core that
REQ_ATOMIC needs to be set, so add IOMAP_F_ATOMIC_BIO for that.
These changes were suggested by Christoph Hellwig and Dave Chinner.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20250320120250.4087011-4-john.g.garry@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
No callers passes flags to xfs_buf_get_uncached, which makes sense
given that the flags apply to behavior not used for uncached buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
No callers passes flags to xfs_buf_read_uncached, which makes sense
given that the flags apply to behavior not used for uncached buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_buf_free_maps only has a single caller, so open code it there. Stop
zeroing the b_maps pointer as the buffer is freed in the next line.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_buf_get_maps has a single caller, and can just be open coded there.
When doing that, stop handling the allocation failure as we always pass
__GFP_NOFAIL to the slab allocator, and use the proper kcalloc helper for
array allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
We never allocate a buffer without backing memory. Simplify the call
chain by calling xfs_buf_alloc_backing_mem from _xfs_buf_alloc. To
avoid a forward declaration, move _xfs_buf_alloc down a bit in the
file.
Also drop the pointless _-prefix from _xfs_buf_alloc.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Remove unnecessary NULL check before kvfree() reported by
Coccinelle/coccicheck and the semantic patch at
scripts/coccinelle/free/ifnullfree.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_zoned_wake_all checks SB_ACTIVE to make sure it does the right thing
when a shutdown happens during unmount, but it fails to account for the
log recovery special case that sets SB_ACTIVE temporarily. Add a NULL
check to cover both cases.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
[hch: added a commit log and comment]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_growfs_data needs to increment m_generation as soon as the primary
superblock has been updated. As the update of the secondary superblocks
was part of xfs_growfs_data_private that mean the incremented had to be
done unconditionally once that was called. Later, commit 83a7f86e39
("xfs: separate secondary sb update in growfs") split the secondary
superblock update into a separate helper, so now the increment on error
can be limited to failed calls to xfs_update_secondary_sbs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The newly added check for the internal RT device needs to unlock
m_growlock just like all ther other error cases.
Fixes: bdc03eb5f9 ("xfs: allow internal RT devices for zoned mode")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
File systems call dax_break_mapping() prior to reallocating file system
blocks to ensure the page is not undergoing any DMA or other accesses.
Generally this is needed when a file is truncated to ensure that if a
block is reallocated nothing is writing to it. However filesystems
currently don't call this when an FS DAX inode is evicted.
This can cause problems when the file system is unmounted as a page can
continue to be under going DMA or other remote access after unmount. This
means if the file system is remounted any truncate or other operation
which requires the underlying file system block to be freed will not wait
for the remote access to complete. Therefore a busy block may be
reallocated to a new file leading to corruption.
Link: https://lkml.kernel.org/r/2d3cf575bbd095084993154be2f0aa7442e5cd28.1740713401.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: Dan Wiliams <dan.j.williams@intel.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prior to any truncation operations file systems call dax_break_mapping()
to ensure pages in the range are not under going DMA. Later DAX
page-cache entries will be removed by truncate_folio_batch_exceptionals()
in the generic page-cache code.
However this makes it possible for folios to be removed from the
page-cache even though they are still DMA busy if the file-system hasn't
called dax_break_mapping(). It also means they can never be waited on in
future because FS DAX will lose track of them once the page-cache entry
has been deleted.
Instead it is better to delete the FS DAX entry when the file-system calls
dax_break_mapping() as part of it's truncate operation. This ensures only
idle pages can be removed from the FS DAX page-cache and makes it easy to
detect if a file-system hasn't called dax_break_mapping() prior to a
truncate operation.
Link: https://lkml.kernel.org/r/3be6115eaaa8d28fee37fcba3287be4f226a7d24.1740713401.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prior to freeing a block file systems supporting FS DAX must check that
the associated pages are both unmapped from user-space and not undergoing
DMA or other access from eg. get_user_pages(). This is achieved by
unmapping the file range and scanning the FS DAX page-cache to see if any
pages within the mapping have an elevated refcount.
This is done using two functions - dax_layout_busy_page_range() which
returns a page to wait for the refcount to become idle on. Rather than
open-code this introduce a common implementation to both unmap and wait
for the page to become idle.
Link: https://lkml.kernel.org/r/c4d381e41fc618296cee2820403c166d80599d5c.1740713401.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Ted Ts'o <tytso@mit.edu>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A FS DAX page is considered idle when its refcount drops to one. This is
currently open-coded in all file systems supporting FS DAX. Move the idle
detection to a common function to make future changes easier.
Link: https://lkml.kernel.org/r/c2c9d269110b90224eeb1dc661ffbc1d82aa20c9.1740713401.git-series.apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Asahi Lina <lina@asahilina.net>
Cc: Balbir Singh <balbirs@nvidia.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Cc: "Darrick J. Wong" <djwong@kernel.org>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: linmiaohe <linmiaohe@huawei.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: Michael "Camp Drill Sergeant" Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: WANG Xuerui <kernel@xen0n.name>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit b35108a51c ("jiffies: Define secs_to_jiffies()") introduced
secs_to_jiffies(). As the value here is a multiple of 1000, use
secs_to_jiffies() instead of msecs_to_jiffies() to avoid the
multiplication
This is converted using scripts/coccinelle/misc/secs_to_jiffies.cocci with
the following Coccinelle rules:
@depends on patch@
expression E;
@@
-msecs_to_jiffies
+secs_to_jiffies
(E
- * \( 1000 \| MSEC_PER_SEC \)
)
Link: https://lkml.kernel.org/r/20250225-converge-secs-to-jiffies-part-two-v3-9-a43967e36c88@linux.microsoft.com
Signed-off-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Damien Le Maol <dlemoal@kernel.org>
Cc: David Sterba <dsterba@suse.com>
Cc: Dick Kennedy <dick.kennedy@broadcom.com>
Cc: Dongsheng Yang <dongsheng.yang@easystack.cn>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Frank Li <frank.li@nxp.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Ilpo Jarvinen <ilpo.jarvinen@linux.intel.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: James Bottomley <james.bottomley@HansenPartnership.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Julia Lawall <julia.lawall@inria.fr>
Cc: Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Nicolas Palix <nicolas.palix@imag.fr>
Cc: Niklas Cassel <cassel@kernel.org>
Cc: Oded Gabbay <ogabbay@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Selvin Thyparampil Xavier <selvin.xavier@broadcom.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Shyam-sundar S-k <Shyam-sundar.S-k@amd.com>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmfVSgwACgkQnJ2qBz9k
QNkhqgf9GbV/DkH+NWKSAkTUkTUj/ibwkpc7KIFVvBEoNQOAqDntpIqDCGKVvywA
hrX0/SxDn34RPSrQSzVVqlH/SGHkL1xgWTOwHUmo2DFEk7k03mfOlGEiV3I85Ugz
ZaPdIfGwXFCf7/bXXJV2zkFPPDQjqkTHSzzBf3Az/HXzTvz7ZZ1QexbXTAlplTuN
4PWkIOZBOAccSLlbqfSygEQ8nuTcR6mjExDXLYwIispDXa6Th28SFMF7nlk5D3G0
/O4YrPmVozb6U/0fmoMr+x3Knu2tz/GDVxP8w4mI9k79FYsJ1UmuywnhZuuniXZF
A1r1HE+DBP6Dd24SVThOQLuQvpnw6Q==
=L6AL
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify reverts from Jan Kara:
"Syzbot has found out that fsnotify HSM events generated on page fault
can be generated while we already hold freeze protection for the
filesystem (when you do buffered write from a buffer which is mmapped
file on the same filesystem) which violates expectations for HSM
events and could lead to deadlocks of HSM clients with filesystem
freezing.
Since it's quite late in the cycle we've decided to revert changes
implementing HSM events on page fault for now and instead just
generate one event for the whole range on mmap(2) so that HSM client
can fetch the data at that moment"
* tag 'fsnotify_for_v6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
Revert "fanotify: disable readahead if we have pre-content watches"
Revert "mm: don't allow huge faults for files with pre content watches"
Revert "fsnotify: generate pre-content permission event on page fault"
Revert "xfs: add pre-content fsnotify hook for DAX faults"
Revert "ext4: add pre-content fsnotify hook for DAX faults"
fsnotify: add pre-content hooks on mmap()
We have a central definition for this function since 2023, used by
a number of different parts of the kernel.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
./fs/xfs/libxfs/xfs_sb.c: xfs_rtbitmap.h is included more than once.
Fixes: 2167eaabe2 ("xfs: define the zoned on-disk format")
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=19446
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
We periodically check the available rt blocks when filling up zones
and start GC if needed, but we may run completely out in between
filling zones, so start GC(unless already running) if we can't reserve
writable space.
This should only happen as a corner case in setups with very few
backing zones.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add three trace points for the different backing memory allocators for
buffers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Directly assign b_addr based on the tmpfs folios without a detour
through pages, reuse the folio_put path used for non-tmpfs buffers
and replace all references to pages in comments with folios.
Partially based on a patch from Dave Chinner <dchinner@redhat.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The fallback buffer allocation path currently open codes a suboptimal
version of vmalloc to allocate pages that are then mapped into
vmalloc space. Switch to using vmalloc instead, which uses all the
optimizations in the common vmalloc code, and removes the need to
track the backing pages in the xfs_buf structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Unmapped buffers don't exist anymore, so the page straddling
detection and slow path code can go away now.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Unmapped buffer access is a pain, so kill it. The switch to large
folios means we rarely pay a vmap penalty for large buffers,
so this functionality is largely unnecessary now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Now that we have the buffer cache using the folio API, we can extend
the use of folios to allocate high order folios for multi-page
buffers rather than an array of single pages that are then vmapped
into a contiguous range.
This creates a new type of single folio buffers that can have arbitrary
order in addition to the existing multi-folio buffers made up of many
single page folios that get vmapped. The single folio is for now
stashed into the existing b_pages array, but that will go away entirely
later in the series and remove the temporary page vs folio typing issues
that only work because the two structures currently can be used largely
interchangeable.
The code that allocates buffers will optimistically attempt a high
order folio allocation as a fast path if the buffer size is a power
of two and thus fits into a folio. If this high order allocation
fails, then we fall back to the existing multi-folio allocation
code. This now forms the slow allocation path, and hopefully will be
largely unused in normal conditions except for buffers with size
that are not a power of two like larger remote xattrs.
This should improve performance of large buffer operations (e.g.
large directory block sizes) as we should now mostly avoid the
expense of vmapping large buffers (and the vmap lock contention that
can occur) as well as avoid the runtime pressure that frequently
accessing kernel vmapped pages put on the TLBs.
Based on a patch from Dave Chinner <dchinner@redhat.com>, but mutilated
beyond recognition.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Since commit 59bb47985c ("mm, sl[aou]b: guarantee natural alignment
for kmalloc(power-of-two)", kmalloc and friends guarantee that power of
two sized allocations are naturally aligned. Limit our use of kmalloc
for buffers to these power of two sizes and remove the fallback to
the page allocator for this case, but keep a check in addition to
trusting the slab allocator to get the alignment right.
Also refactor the kmalloc path to reuse various calculations for the
size and gfp flags.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Lift handling of shmem and slab backed buffers into xfs_buf_alloc_pages
and rename the result to xfs_buf_alloc_backing_mem. This shares more
code and ensures uncached buffers can also use slab, which slightly
reduces the memory usage of growfs on 512 byte sector size file systems,
but more importantly means the allocation invariants are the same for
cached and uncached buffers. Document these new invariants with a big
fat comment mostly stolen from a patch by Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
No need to look at the page count if we can simply call is_vmalloc_addr
on bp->b_addr. This prepares for eventualy removing the b_page_count
field.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
b_offset is only set for slab backed buffers and always set to
offset_in_page(bp->b_addr), which can be done just as easily in the only
user of b_offset.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
No need to walk the page list if bp->b_addr is valid. That also means
b_offset doesn't need to be taken into account in the unmapped loop as
b_offset is only set for kmem backed buffers which are always mapped.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
We never log large contiguous regions of unmapped buffers, so this
bug is never triggered by the current code. However, the slowpath
for formatting buffer straddling regions is broken.
That is, the size and shape of the log vector calculated across a
straddle does not match how the formatting code formats a straddle.
This results in a log vector with an uninitialised iovec and this
causes a crash when xlog_write_full() goes to copy the iovec into
the journal.
Whilst touching this code, don't bother checking mapped or single
folio buffers for discontiguous regions because they don't have
them. This significantly reduces the overhead of this check when
logging large buffers as calling xfs_buf_offset() is not free and
it occurs a *lot* in those cases.
Fixes: 929f8b0deb ("xfs: optimise xfs_buf_item_size/format for contiguous regions")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
We have a central definition for this function since 2023, used by
a number of different parts of the kernel.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The commit titled "block/bdev: lift block size restrictions to 64k"
lifted the block layer's max supported block size to 64k inside the
helper blk_validate_block_size() now that we support large folios.
However in lifting the block size we also removed the silly use
cases many filesystems have to use sb_set_blocksize() to *verify*
that the block size <= PAGE_SIZE. The call to sb_set_blocksize() was
used to check the block size <= PAGE_SIZE since historically we've
always supported userspace to create for example 64k block size
filesystems even on 4k page size systems, but what we didn't allow
was mounting them. Older filesystems have been using the check with
sb_set_blocksize() for years.
While, we could argue that such checks should be filesystem specific,
there are much more users of sb_set_blocksize() than LBS enabled
filesystem on upstream, so just do the easier thing and bring back
the PAGE_SIZE check for sb_set_blocksize() users and only skip it
for LBS enabled filesystems.
This will ensure that tests such as generic/466 when run in a loop
against say, ext4, won't try to try to actually mount a filesystem with
a block size larger than your filesystem supports given your PAGE_SIZE
and in the worst case crash.
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20250307020403.3068567-1-mcgrof@kernel.org
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
vfs_mkdir() does not guarantee to leave the child dentry hashed or make
it positive on success, and in many such cases the filesystem had to use
a different dentry which it can now return.
This patch changes vfs_mkdir() to return the dentry provided by the
filesystems which is hashed and positive when provided. This reduces
the number of cases where the resulting dentry is not positive to a
handful which don't deserve extra efforts.
The only callers of vfs_mkdir() which are interested in the resulting
inode are in-kernel filesystem clients: cachefiles, nfsd, smb/server.
The only filesystems that don't reliably provide the inode are:
- kernfs, tracefs which these clients are unlikely to be interested in
- cifs in some configurations would need to do a lookup to find the
created inode, but doesn't. cifs cannot be exported via NFS, is
unlikely to be used by cachefiles, and smb/server only has a soft
requirement for the inode, so this is unlikely to be a problem in
practice.
- hostfs, nfs, cifs may need to do a lookup (rarely for NFS) and it is
possible for a race to make that lookup fail. Actual failure
is unlikely and providing callers handle negative dentries graceful
they will fail-safe.
So this patch removes the lookup code in nfsd and smb/server and adjusts
them to fail safe if a negative dentry is provided:
- cache-files already fails safe by restarting the task from the
top - it still does with this change, though it no longer calls
cachefiles_put_directory() as that will crash if the dentry is
negative.
- nfsd reports "Server-fault" which it what it used to do if the lookup
failed. This will never happen on any file-systems that it can actually
export, so this is of no consequence. I removed the fh_update()
call as that is not needed and out-of-place. A subsequent
nfsd_create_setattr() call will call fh_update() when needed.
- smb/server only wants the inode to call ksmbd_smb_inherit_owner()
which updates ->i_uid (without calling notify_change() or similar)
which can be safely skipping on cifs (I hope).
If a different dentry is returned, the first one is put. If necessary
the fact that it is new can be determined by comparing pointers. A new
dentry will certainly have a new pointer (as the old is put after the
new is obtained).
Similarly if an error is returned (via ERR_PTR()) the original dentry is
put.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neilb@suse.de>
Link: https://lore.kernel.org/r/20250227013949.536172-7-neilb@suse.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a zoned group with an attribute for the maximum number of open zones.
This allows querying the open zones for data placement tests, or also
for placement aware applications that are in control of the entire
file system.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Extend the error sysfs initialization helper to include the neighbouring
attributes as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Add the per-zone life time hint and the used block distribution
for fully written zones, grouping reclaimable zones in fixed-percentage
buckets spanning 0..9%, 10..19% and full zones as 100% used as well as a
few statistics about the zone allocator and open and reclaimable zones
in /proc/*/mountstats.
This gives good insight into data fragmentation and data placement
success rate.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Co-developed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
The show_stats option allows a file system to dump plain text statistic
on a per-mount basis into /proc/*/mountstats. Wire up a no-op version
which will grow useful information for zoned file systems later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Add a file write life time data placement allocation scheme that aims to
minimize fragmentation and thereby to do two things:
a) separate file data to different zones when possible.
b) colocate file data of similar life times when feasible.
To get best results, average file sizes should align with the zone
capacity that is reported through the XFS_IOC_FSGEOMETRY ioctl.
This improvement in data placement efficiency reduces the number of
blocks requiring relocation by GC, and thus decreases overall write
amplification. The impact on performance varies depending on how full
the file system is.
For RocksDB using leveled compaction, the lifetime hints can improve
throughput for overwrite workloads at 80% file system utilization by
~10%, but for lower file system utilization there won't be as much
benefit in application performance as there is less need for garbage
collection to start with.
Lifetime hints can be disabled using the nolifetime mount option.
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Allow limiting the number of open zones used below that exported by the
device. This is required to tune the number of write streams when zoned
RT devices are used on conventional devices, and can be useful on zoned
devices that support a very large number of open zones.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Zoned devices can have gaps beyond the usable capacity of a zone and the
end in the LBA/daddr address space. In other words, the hardware
equivalent to the RT groups already takes care of the power of 2
alignment for us. In this case the sparse FSB/RTB address space maps 1:1
to the device address space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Enable the zoned RT device directory feature. With this feature, RT
groups are written sequentially and always emptied before rewriting
the blocks. This perfectly maps to zoned devices, but can also be
used on conventional block devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
While the zoned on-disk format supports reflinks, the GC code currently
always unshares reflinks when moving blocks to new zones, thus making the
feature unusuable. Disable reflinks until the GC code is refcount aware.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
File system with internal RT devices are a bit odd in that we need
to report AGs and RGs. To make this happen use separate synthetic
fmr_device values for the different sections instead of the dev_t
mapping used by other XFS configurations.
The data device is reported as file system metadata before the
start of the RGs for the synthetic RT fmr_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Space usage is tracked by the rmap, which already is separately
cross-referenced. But on top of that we have the write pointer and can
do a basic sanity check here that the block is not beyond the write
pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Space usage is tracked by the rmap, which already is separately
cross-referenced. But on top of that we have the write pointer and can
do a basic sanity check here that the block is not beyond the write
pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Zoned file systems can have COW forks even without reflinks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Replace the inner loop growing one RT bitmap block at a time with
one just modifying the superblock counters for growing an entire
zone (aka RTG). The big restriction is just like at mkfs time only
a RT extent size of a single FSB is allowed, and the file system
capacity needs to be aligned to the zone size.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
File systems with a zoned RT device have a large number of reserved
blocks that are required for garbage collection, and which can't be
filled with user data. Exclude them from the available blocks reported
through stat(v)fs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Make xfs_rtextent_free_finish_item call into the zoned allocator to free
blocks on zoned RT devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Direct writes to zoned RT devices are extremely simple. After taking the
block reservation before acquiring the iolock, the iomap direct I/O calls
into ->iomap_begin which will return a "fake" iomap for the entire
requested range. The actual block allocation is then done from the
submit_io handler using code shared with the buffered I/O path.
The iomap_dio_ops set the bio_set to the (iomap) ioend one and initialize
the embedded ioend, which allows reusing the existing ioend based buffered
I/O completion path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Implement buffered writes including page faults and block zeroing for
zoned RT devices. Buffered writes to zoned RT devices are split into
three phases:
1) a reservation for the worst case data block usage is taken before
acquiring the iolock. When there are enough free blocks but not
enough available one, garbage collection is kicked off to free the
space before continuing with the write. If there isn't enough
freeable space, the block reservation is reduced and a short write
will happen as expected by normal Linux write semantics.
2) with the iolock held, the generic iomap buffered write code is
called, which through the iomap_begin operation usually just inserts
delalloc extents for the range in a single iteration. Only for
overwrites of existing data that are not block aligned, or zeroing
operations the existing extent mapping is read to fill out the srcmap
and to figure out if zeroing is required.
3) the ->map_blocks callback to the generic iomap writeback code
calls into the zoned space allocator to actually allocate on-disk
space for the range before kicking of the writeback.
Note that because all writes are out of place, truncate or hole punches
that are not aligned to block size boundaries need to allocate space.
For block zeroing from truncate, ->setattr is called with the iolock
(aka i_rwsem) already held, so a hacky deviation from the above
scheme is needed. In this case the space reservations is called with
the iolock held, but is required not to block and can dip into the
reserved block pool. This can lead to -ENOSPC when truncating a
file, which is unfortunate. But fixing the calling conventions in
the VFS is probably much easier with code requiring it already in
mainline.
Similarly because all writes are out place, the zoned allocator can't
support unwritten extents and thus the FALLOC_FL_ALLOCATE_RANGE range
mode of fallocate. Other fallocate modes that would reserved space
but don't need to to provide proper semantics do work but do not
reserve space.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
RT groups on a zoned file system need to be completely empty before their
space can be reused. This means that partially empty groups need to be
emptied entirely to free up space if no entirely free groups are
available.
Add a garbage collection thread that moves all data out of the least used
zone when not enough free zones are available, and which resets all zones
that have been emptied. To find empty zone a simple set of 10 buckets
based on the amount of space used in the zone is used. To empty zones,
the rmap is walked to find the owners and the data is read and then
written to the new place.
To automatically defragment files the rmap records are sorted by inode
and logical offset. This means defragmentation of parallel writes into
a single zone happens automatically when performing garbage collection.
Because holding the iolock over the entire GC cycle would inject very
noticeable latency for other accesses to the inodes, the iolock is not
taken while performing I/O. Instead the I/O completion handler checks
that the mapping hasn't changed over the one recorded at the start of
the GC cycle and doesn't update the mapping if it change.
Co-developed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
For zoned file systems garbage collection (GC) has to take the iolock
and mmaplock after moving data to a new place to synchronize with
readers. This means waiting for garbage collection with the iolock can
deadlock.
To avoid this, the worst case required blocks have to be reserved before
taking the iolock, which is done using a new RTAVAILABLE counter that
tracks blocks that are free to write into and don't require garbage
collection. The new helpers try to take these available blocks, and
if there aren't enough available it wakes and waits for GC. This is
done using a list of on-stack reservations to ensure fairness.
Co-developed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
For zoned RT devices space is always allocated at the write pointer, that
is right after the last written block and only recorded on I/O completion.
Because the actual allocation algorithm is very simple and just involves
picking a good zone - preferably the one used for the last write to the
inode. As the number of zones that can written at the same time is
usually limited by the hardware, selecting a zone is done as late as
possible from the iomap dio and buffered writeback bio submissions
helpers just before submitting the bio.
Given that the writers already took a reservation before acquiring the
iolock, space will always be readily available if an open zone slot is
available. A new structure is used to track these open zones, and
pointed to by the xfs_rtgroup. Because zoned file systems don't have
a rsum cache the space for that pointer can be reused.
Allocations are only recorded at I/O completion time. The scheme used
for that is very similar to the reflink COW end I/O path.
Co-developed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Add support to validate and parse reported hardware zone state.
Co-developed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
The zoned allocator never performs speculative preallocations, so don't
bother queueing up zoned inodes here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Zoned file systems require out of place writes and thus can't support
post-EOF speculative preallocations. Avoid the pointless ilock critical
section to find out that none can be freed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
The zoned allocator unconditionally issues zone resets or discards after
emptying an entire zone, so supporting FITRIM for a zoned RT device is
not useful.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Zoned file systems not only don't use the global frextents counter, but
for them the in-memory percpu counter also includes reservations taken
before even allocating delalloc extent records, so it will never match
the per-zone used information. Disable all updates and verification of
the sb counter for zoned file systems as it isn't useful for them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Export the zoned geometry information so that userspace can query it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Allow creating an RT subvolume on the same device as the main data
device. This is mostly used for SMR HDDs where the conventional zones
are used for the data device and the sequential write required zones
for the zoned RT section.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Zone file systems reuse the basic RT group enabled XFS file system
structure to support a mode where each RT group is always written from
start to end and then reset for reuse (after moving out any remaining
data). There are few minor but important changes, which are indicated
by a new incompat flag:
1) there are no bitmap and summary inodes, thus the
/rtgroups/{rgno}.{bitmap,summary} metadir files do not exist and the
sb_rbmblocks superblock field must be cleared to zero.
2) there is a new superblock field that specifies the start of an
internal RT section. This allows supporting SMR HDDs that have random
writable space at the beginning which is used for the XFS data device
(which really is the metadata device for this configuration), directly
followed by a RT device on the same block device. While something
similar could be achieved using dm-linear just having a single device
directly consumed by XFS makes handling the file systems a lot easier.
3) Another superblock field that tracks the amount of reserved space (or
overprovisioning) that is never used for user capacity, but allows GC
to run more smoothly.
4) an overlay of the cowextsize field for the rtrmap inode so that we
can persistently track the total amount of rtblocks currently used in
a RT group. There is no data structure other than the rmap that
tracks used space in an RT group, and this counter is used to decide
when a RT group has been entirely emptied, and to select one that
is relatively empty if garbage collection needs to be performed.
While this counter could be tracked entirely in memory and rebuilt
from the rmap at mount time, that would lead to very long mount times
with the large number of RT groups implied by the number of hardware
zones especially on SMR hard drives with 256MB zone sizes.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Add a helper to find the last offset mapped in the rtrmap. This will be
used by the zoned code to find out where to start writing again on
conventional devices without hardware zone support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
The zone allocator wants to be able to remove a delalloc mapping in the
COW fork while keeping the block reservation. To support that pass the
flags argument down to xfs_bmap_del_extent_delay and support the
XFS_BMAPI_REMAP flag to keep the reservation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
For always COW inodes we also must check the alignment of each individual
iovec segment, as they could end up with different I/Os due to the way
bio_iov_iter_get_pages works, and we'd then overwrite an already written
block. The existing always_cow sysctl based code doesn't catch this
because nothing enforces that blocks aren't rewritten, but for zoned XFS
on sequential write required zones this is a hard error.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
xfs_reflink_trim_around_shared tries to find shared blocks in the
refcount btree. Always_cow inodes don't have that tree, so don't
bother.
For the existing always_cow code this is a minor optimization. For
the upcoming zoned code that can do COW without the rtreflink code it
avoids triggering a NULL pointer dereference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Delalloc reservations are not supported in userspace, and thus it doesn't
make sense to share this helper with xfsprogs.c. Move it to xfs_iomap.c
toward the two callers.
Note that there rest of the delalloc handling should probably eventually
also move out of xfs_bmap.c, but that will require a bit more surgery.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Shortcut dereferencing the xg_block_count field in the generic group
structure.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>