mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-04 20:19:47 +08:00
8b7ab8eb52
2206 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Roger Pau Monne
|
74287971db |
xen/x86: fix initial memory balloon target
When adding extra memory regions as ballooned pages also adjust the balloon
target, otherwise when the balloon driver is started it will populate
memory to match the target value and consume all the extra memory regions
added.
This made the usage of the Xen `dom0_mem=,max:` command line parameter for
dom0 not work as expected, as the target won't be adjusted and when the
balloon is started it will populate memory straight to the 'max:' value.
It would equally affect domUs that have memory != maxmem.
Kernels built with CONFIG_XEN_UNPOPULATED_ALLOC are not affected, because
the extra memory regions are consumed by the unpopulated allocation driver,
and then balloon_add_regions() becomes a no-op.
Reported-by: John <jw@nuclearfallout.net>
Fixes:
|
||
|
John Ernberg
|
406251a408 |
xen: swiotlb: Wire up map_resource callback
When running Xen on iMX8QXP, an Arm SoC without IOMMU, DMA performed via its eDMA v3 DMA engine fail with a mapping error. The eDMA performs DMA between RAM and MMIO space, and it's the MMIO side that cannot be mapped. MMIO->RAM DMA access cannot be bounce buffered if it would straddle a page boundary and on Xen the MMIO space is 1:1 mapped for Arm, and x86 PV Dom0. Cases where MMIO space is not 1:1 mapped, such as x86 PVH Dom0, requires an IOMMU present to deal with the mapping. Considering the above the map_resource callback can just be wired to the existing dma_direct_map_resource() function. There is nothing to do for unmap so the unmap callback is not needed. Signed-off-by: John Ernberg <john.ernberg@actia.se> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <20250512071440.3726697-1-john.ernberg@actia.se> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Jason Andryuk
|
1f0304dfd9 |
xenbus: Use kref to track req lifetime
Marek reported seeing a NULL pointer fault in the xenbus_thread
callstack:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: e030:__wake_up_common+0x4c/0x180
Call Trace:
<TASK>
__wake_up_common_lock+0x82/0xd0
process_msg+0x18e/0x2f0
xenbus_thread+0x165/0x1c0
process_msg+0x18e is req->cb(req). req->cb is set to xs_wake_up(), a
thin wrapper around wake_up(), or xenbus_dev_queue_reply(). It seems
like it was xs_wake_up() in this case.
It seems like req may have woken up the xs_wait_for_reply(), which
kfree()ed the req. When xenbus_thread resumes, it faults on the zero-ed
data.
Linux Device Drivers 2nd edition states:
"Normally, a wake_up call can cause an immediate reschedule to happen,
meaning that other processes might run before wake_up returns."
... which would match the behaviour observed.
Change to keeping two krefs on each request. One for the caller, and
one for xenbus_thread. Each will kref_put() when finished, and the last
will free it.
This use of kref matches the description in
Documentation/core-api/kref.rst
Link: https://lore.kernel.org/xen-devel/ZO0WrR5J0xuwDIxW@mail-itl/
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes:
|
||
|
Jason Andryuk
|
90989869ba |
xenbus: Allow PVH dom0 a non-local xenstore
Make xenbus_init() allow a non-local xenstore for a PVH dom0 - it is currently forced to XS_LOCAL. With Hyperlaunch booting dom0 and a xenstore stubdom, dom0 can be handled as a regular XS_HVM following the late init path. Ideally we'd drop the use of xen_initial_domain() and just check for the event channel instead. However, ARM has a xen,enhanced no-xenstore mode, where the event channel and PFN would both be 0. Retain the xen_initial_domain() check, and use that for an additional check when the event channel is 0. Check the full 64bit HVM_PARAM_STORE_EVTCHN value to catch the off chance that high bits are set for the 32bit event channel. Signed-off-by: Jason Andryuk <jason.andryuk@amd.com> Change-Id: I5506da42e4c6b8e85079fefb2f193c8de17c7437 Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20250506204456.5220-1-jason.andryuk@amd.com> |
||
|
John Ernberg
|
cd9c058489 |
xen: swiotlb: Use swiotlb bouncing if kmalloc allocation demands it
Xen swiotlb support was missed when the patch set starting with |
||
|
Roger Pau Monne
|
87af633689 |
x86/xen: fix balloon target initialization for PVH dom0
PVH dom0 re-uses logic from PV dom0, in which RAM ranges not assigned to dom0 are re-used as scratch memory to map foreign and grant pages. Such logic relies on reporting those unpopulated ranges as RAM to Linux, and mark them as reserved. This way Linux creates the underlying page structures required for metadata management. Such approach works fine on PV because the initial balloon target is calculated using specific Xen data, that doesn't take into account the memory type changes described above. However on HVM and PVH the initial balloon target is calculated using get_num_physpages(), and that function does take into account the unpopulated RAM regions used as scratch space for remote domain mappings. This leads to PVH dom0 having an incorrect initial balloon target, which causes malfunction (excessive memory freeing) of the balloon driver if the dom0 memory target is later adjusted from the toolstack. Fix this by using xen_released_pages to account for any pages that are part of the memory map, but are already unpopulated when the balloon driver is initialized. This accounts for any regions used for scratch remote mappings. Note on x86 xen_released_pages definition is moved to enlighten.c so it's uniformly available for all Xen-enabled builds. Take the opportunity to unify PV with PVH/HVM guests regarding the usage of get_num_physpages(), as that avoids having to add different logic for PV vs PVH in both balloon_add_regions() and arch_xen_unpopulated_init(). Much like |
||
|
Jason Andryuk
|
0f2946bb17 |
xen: Change xen-acpi-processor dom0 dependency
xen-acpi-processor functions under a PVH dom0 with only a xen_initial_domain() runtime check. Change the Kconfig dependency from PV dom0 to generic dom0 to reflect that. Suggested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Jason Andryuk <jason.andryuk@amd.com> Reviewed-by: Juergen Gross <jgross@suse.com> Tested-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20250331172913.51240-1-jason.andryuk@amd.com> |
||
|
Arnd Bergmann
|
b40c546481 |
xenbus: add module description
Modules without a description now cause a warning: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/xen/xenbus/xenbus_probe_frontend.o Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> Message-ID: <20250328113302.2632353-1-arnd@kernel.org> |
||
|
Linus Torvalds
|
eb0ece1602 |
- The 6 patch series "Enable strict percpu address space checks" from
Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was founf to be incorrect. - The 4 patch series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The 17 patch series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The 5 patch series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The 4 patch series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The 12 patch series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The 2 patch series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The 2 patch series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The 3 patch series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The 3 patch series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The 4 patch series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The 4 patch series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The 4 patch series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The 18 patch series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The 27 patch series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The 19 patch series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The 12 patch series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The 5 patch series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The 8 patch series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The 2 patch series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The 3 patch series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The 3 patch series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The 3 patch series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The 9 patch series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The 5 patch series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The 20 patch series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The 13 patch series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The 13 patch series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The 3 patch series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The 8 patch series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The 2 patch series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The 3 patch series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The 4 patch series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The 3 patch series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The 5 patch series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The 5 patch series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The 4 patch series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The 2 patch series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The 2 patch series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. -----BEGIN PGP SIGNATURE----- iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF Ee93qSSLR1BkNdDw+931Pu0mXfbnBw== =Pn2K -----END PGP SIGNATURE----- Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - The series "Enable strict percpu address space checks" from Uros Bizjak uses x86 named address space qualifiers to provide compile-time checking of percpu area accesses. This has caused a small amount of fallout - two or three issues were reported. In all cases the calling code was found to be incorrect. - The series "Some cleanup for memcg" from Chen Ridong implements some relatively monir cleanups for the memcontrol code. - The series "mm: fixes for device-exclusive entries (hmm)" from David Hildenbrand fixes a boatload of issues which David found then using device-exclusive PTE entries when THP is enabled. More work is needed, but this makes thins better - our own HMM selftests now succeed. - The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed remove the z3fold and zbud implementations. They have been deprecated for half a year and nobody has complained. - The series "mm: further simplify VMA merge operation" from Lorenzo Stoakes implements numerous simplifications in this area. No runtime effects are anticipated. - The series "mm/madvise: remove redundant mmap_lock operations from process_madvise()" from SeongJae Park rationalizes the locking in the madvise() implementation. Performance gains of 20-25% were observed in one MADV_DONTNEED microbenchmark. - The series "Tiny cleanup and improvements about SWAP code" from Baoquan He contains a number of touchups to issues which Baoquan noticed when working on the swap code. - The series "mm: kmemleak: Usability improvements" from Catalin Marinas implements a couple of improvements to the kmemleak user-visible output. - The series "mm/damon/paddr: fix large folios access and schemes handling" from Usama Arif provides a couple of fixes for DAMON's handling of large folios. - The series "mm/damon/core: fix wrong and/or useless damos_walk() behaviors" from SeongJae Park fixes a few issues with the accuracy of kdamond's walking of DAMON regions. - The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo Stoakes changes the interaction between framebuffer deferred-io and core MM. No functional changes are anticipated - this is preparatory work for the future removal of page structure fields. - The series "mm/damon: add support for hugepage_size DAMOS filter" from Usama Arif adds a DAMOS filter which permits the filtering by huge page sizes. - The series "mm: permit guard regions for file-backed/shmem mappings" from Lorenzo Stoakes extends the guard region feature from its present "anon mappings only" state. The feature now covers shmem and file-backed mappings. - The series "mm: batched unmap lazyfree large folios during reclamation" from Barry Song cleans up and speeds up the unmapping for pte-mapped large folios. - The series "reimplement per-vma lock as a refcount" from Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for pulling it out were largely bogus and that change made the code more messy. This patchset provides small (0-10%) improvements on one microbenchmark. - The series "Docs/mm/damon: misc DAMOS filters documentation fixes and improves" from SeongJae Park does some maintenance work on the DAMON docs. - The series "hugetlb/CMA improvements for large systems" from Frank van der Linden addresses a pile of issues which have been observed when using CMA on large machines. - The series "mm/damon: introduce DAMOS filter type for unmapped pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the page's mapped/unmapped status. - The series "zsmalloc/zram: there be preemption" from Sergey Senozhatsky teaches zram to run its compression and decompression operations preemptibly. - The series "selftests/mm: Some cleanups from trying to run them" from Brendan Jackman fixes a pile of unrelated issues which Brendan encountered while runnimg our selftests. - The series "fs/proc/task_mmu: add guard region bit to pagemap" from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to determine whether a particular page is a guard page. - The series "mm, swap: remove swap slot cache" from Kairui Song removes the swap slot cache from the allocation path - it simply wasn't being effective. - The series "mm: cleanups for device-exclusive entries (hmm)" from David Hildenbrand implements a number of unrelated cleanups in this code. - The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual implements a number of preparatoty cleanups to the GENERIC_PTDUMP Kconfig logic. - The series "mm/damon: auto-tune aggregation interval" from SeongJae Park implements a feedback-driven automatic tuning feature for DAMON's aggregation interval tuning. - The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did this in preparation for implementing lazy mmu mode for arm64 to optimize vmalloc. - The series "mm/page_alloc: Some clarifications for migratetype fallback" from Brendan Jackman reworks some commentary to make the code easier to follow. - The series "page_counter cleanup and size reduction" from Shakeel Butt cleans up the page_counter code and fixes a size increase which we accidentally added late last year. - The series "Add a command line option that enables control of how many threads should be used to allocate huge pages" from Thomas Prescher does that. It allows the careful operator to significantly reduce boot time by tuning the parallalization of huge page initialization. - The series "Fix calculations in trace_balance_dirty_pages() for cgwb" from Tang Yizhou fixes the tracing output from the dirty page balancing code. - The series "mm/damon: make allow filters after reject filters useful and intuitive" from SeongJae Park improves the handling of allow and reject filters. Behaviour is made more consistent and the documention is updated accordingly. - The series "Switch zswap to object read/write APIs" from Yosry Ahmed updates zswap to the new object read/write APIs and thus permits the removal of some legacy code from zpool and zsmalloc. - The series "Some trivial cleanups for shmem" from Baolin Wang does as it claims. - The series "fs/dax: Fix ZONE_DEVICE page reference counts" from Alistair Popple regularizes the weird ZONE_DEVICE page refcount handling in DAX, permittig the removal of a number of special-case checks. - The series "refactor mremap and fix bug" from Lorenzo Stoakes is a preparatoty refactoring and cleanup of the mremap() code. - The series "mm: MM owner tracking for large folios (!hugetlb) + CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in which we determine whether a large folio is known to be mapped exclusively into a single MM. - The series "mm/damon: add sysfs dirs for managing DAMOS filters based on handling layers" from SeongJae Park adds a couple of new sysfs directories to ease the management of DAMON/DAMOS filters. - The series "arch, mm: reduce code duplication in mem_init()" from Mike Rapoport consolidates many per-arch implementations of mem_init() into code generic code, where that is practical. - The series "mm/damon/sysfs: commit parameters online via damon_call()" from SeongJae Park continues the cleaning up of sysfs access to DAMON internal data. - The series "mm: page_ext: Introduce new iteration API" from Luiz Capitulino reworks the page_ext initialization to fix a boot-time crash which was observed with an unusual combination of compile and cmdline options. - The series "Buddy allocator like (or non-uniform) folio split" from Zi Yan reworks the code to split a folio into smaller folios. The main benefit is lessened memory consumption: fewer post-split folios are generated. - The series "Minimize xa_node allocation during xarry split" from Zi Yan reduces the number of xarray xa_nodes which are generated during an xarray split. - The series "drivers/base/memory: Two cleanups" from Gavin Shan performs some maintenance work on the drivers/base/memory code. - The series "Add tracepoints for lowmem reserves, watermarks and totalreserve_pages" from Martin Liu adds some more tracepoints to the page allocator code. - The series "mm/madvise: cleanup requests validations and classifications" from SeongJae Park cleans up some warts which SeongJae observed during his earlier madvise work. - The series "mm/hwpoison: Fix regressions in memory failure handling" from Shuai Xue addresses two quite serious regressions which Shuai has observed in the memory-failure implementation. - The series "mm: reliable huge page allocator" from Johannes Weiner makes huge page allocations cheaper and more reliable by reducing fragmentation. - The series "Minor memcg cleanups & prep for memdescs" from Matthew Wilcox is preparatory work for the future implementation of memdescs. - The series "track memory used by balloon drivers" from Nico Pache introduces a way to track memory used by our various balloon drivers. - The series "mm/damon: introduce DAMOS filter type for active pages" from Nhat Pham permits users to filter for active/inactive pages, separately for file and anon pages. - The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia separates the proactive reclaim statistics from the direct reclaim statistics. - The series "mm/vmscan: don't try to reclaim hwpoison folio" from Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim code. * tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits) mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex() x86/mm: restore early initialization of high_memory for 32-bits mm/vmscan: don't try to reclaim hwpoison folio mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper cgroup: docs: add pswpin and pswpout items in cgroup v2 doc mm: vmscan: split proactive reclaim statistics from direct reclaim statistics selftests/mm: speed up split_huge_page_test selftests/mm: uffd-unit-tests support for hugepages > 2M docs/mm/damon/design: document active DAMOS filter type mm/damon: implement a new DAMOS filter type for active pages fs/dax: don't disassociate zero page entries MM documentation: add "Unaccepted" meminfo entry selftests/mm: add commentary about 9pfs bugs fork: use __vmalloc_node() for stack allocation docs/mm: Physical Memory: Populate the "Zones" section xen: balloon: update the NR_BALLOON_PAGES state hv_balloon: update the NR_BALLOON_PAGES state balloon_compaction: update the NR_BALLOON_PAGES state meminfo: add a per node counter for balloon drivers mm: remove references to folio in __memcg_kmem_uncharge_page() ... |
||
|
Nico Pache
|
f6a09e6800 |
xen: balloon: update the NR_BALLOON_PAGES state
Update the NR_BALLOON_PAGES counter when pages are added to or removed from the Xen balloon. Link: https://lkml.kernel.org/r/20250314213757.244258-5-npache@redhat.com Signed-off-by: Nico Pache <npache@redhat.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: Alexander Atanasov <alexander.atanasov@virtuozzo.com> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: David Hildenbrand <david@redhat.com> Cc: Dexuan Cui <decui@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Juegren Gross <jgross@suse.com> Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Wei Liu <wei.liu@kernel.org> Cc: Michael Kelley <mhklinux@outlook.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Roger Pau Monne
|
5ccf1b8ae7 |
xen/pci: Do not register devices with segments >= 0x10000
The current hypercall interface for doing PCI device operations always uses a segment field that has a 16 bit width. However on Linux there are buses like VMD that hook up devices into the PCI hierarchy at segment >= 0x10000, after the maximum possible segment enumerated in ACPI. Attempting to register or manage those devices with Xen would result in errors at best, or overlaps with existing devices living on the truncated equivalent segment values. Note also that the VMD segment numbers are arbitrarily assigned by the OS, and hence there would need to be some negotiation between Xen and the OS to agree on how to enumerate VMD segments and devices behind them. Skip notifying Xen about those devices. Given how VMD bridges can multiplex interrupts on behalf of devices behind them there's no need for Xen to be aware of such devices for them to be usable by Linux. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: Juergen Gross <jgross@suse.com> Message-ID: <20250219092059.90850-2-roger.pau@citrix.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Dr. David Alan Gilbert
|
421d62f47b |
xen/pciback: Remove unused pcistub_get_pci_dev
pcistub_get_pci_dev() was added in 2009 as part of:
commit
|
||
|
Jan Beulich
|
5c4e79e29a |
xenfs/xensyms: respect hypervisor's "next" indication
The interface specifies the symnum field as an input and output; the
hypervisor sets it to the next sequential symbol's index. xensyms_next()
incrementing the position explicitly (and xensyms_next_sym()
decrementing it to "rewind") is only correct as long as the sequence of
symbol indexes is non-sparse. Use the hypervisor-supplied value instead
to update the position in xensyms_next(), and use the saved incoming
index in xensyms_next_sym().
Cc: stable@kernel.org
Fixes:
|
||
|
Frediano Ziglio
|
2356f15cae |
xen: Add support for XenServer 6.1 platform device
On XenServer on Windows machine a platform device with ID 2 instead of
1 is used.
This device is mainly identical to device 1 but due to some Windows
update behaviour it was decided to use a device with a different ID.
This causes compatibility issues with Linux which expects, if Xen
is detected, to find a Xen platform device (5853:0001) otherwise code
will crash due to some missing initialization (specifically grant
tables). Specifically from dmesg
RIP: 0010:gnttab_expand+0x29/0x210
Code: 90 0f 1f 44 00 00 55 31 d2 48 89 e5 41 57 41 56 41 55 41 89 fd
41 54 53 48 83 ec 10 48 8b 05 7e 9a 49 02 44 8b 35 a7 9a 49 02
<8b> 48 04 8d 44 39 ff f7 f1 45 8d 24 06 89 c3 e8 43 fe ff ff
44 39
RSP: 0000:ffffba34c01fbc88 EFLAGS: 00010086
...
The device 2 is presented by Xapi adding device specification to
Qemu command line.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250227145016.25350-1-frediano.ziglio@cloud.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
||
|
Linus Torvalds
|
fd31a1bea3 |
xen: branch for v6.14-rc3
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZ672+AAKCRCAXGG7T9hj vqnNAP99iQfUC5je/UYE4k9ku0oRD9+d65G5YCmnLv5egUOuTgD/UT+N0LYaahS7 5hRh61sicj57dsrN4kA4U4TpVvoFsAY= =CUIl -----END PGP SIGNATURE----- Merge tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Three fixes to xen-swiotlb driver: - two fixes for issues coming up due to another fix in 6.12 - addition of an __init annotation" * tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Xen/swiotlb: mark xen_swiotlb_fixup() __init x86/xen: allow larger contiguous memory regions in PV guests xen/swiotlb: relax alignment requirements |
||
|
Jan Beulich
|
75ad02318a |
Xen/swiotlb: mark xen_swiotlb_fixup() __init
It's sole user (pci_xen_swiotlb_init()) is __init, too. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <e1198286-99ec-41c1-b5ad-e04e285836c9@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Juergen Gross
|
85fcb57c98 |
xen/swiotlb: relax alignment requirements
When mapping a buffer for DMA via .map_page or .map_sg DMA operations,
there is no need to check the machine frames to be aligned according
to the mapped areas size. All what is needed in these cases is that the
buffer is contiguous at machine level.
So carve out the alignment check from range_straddles_page_boundary()
and move it to a helper called by xen_swiotlb_alloc_coherent() and
xen_swiotlb_free_coherent() directly.
Fixes:
|
||
|
Linus Torvalds
|
b2091a6482 |
xen: branch for v6.14-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZ5pznQAKCRCAXGG7T9hj vugFAP9C2pZzIEHcXxw5SzlxRw7ntMdLT+aLplhze5+kUOy0OAD/UisdiFAVaN77 Y3h/Jw7J8wh4QMLkVkPBafTWUvXbLwI= =4rig -----END PGP SIGNATURE----- Merge tag 'for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: "Three minor fixes" * tag 'for-linus-6.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: update pvcalls_front_accept prototype Grab mm lock before grabbing pt lock xen: pcpu: remove unnecessary __ref annotation |
||
|
Joel Granados
|
1751f872cc |
treewide: const qualify ctl_tables where applicable
Add the const qualifier to all the ctl_tables in the tree except for
watchdog_hardlockup_sysctl, memory_allocation_profiling_sysctls,
loadpin_sysctl_table and the ones calling register_net_sysctl (./net,
drivers/inifiniband dirs). These are special cases as they use a
registration function with a non-const qualified ctl_table argument or
modify the arrays before passing them on to the registration function.
Constifying ctl_table structs will prevent the modification of
proc_handler function pointers as the arrays would reside in .rodata.
This is made possible after commit
|
||
|
Stefano Stabellini
|
bda50f7770 |
xen: update pvcalls_front_accept prototype
While currently there are no in-tree callers of these functions, it is best to keep them up-to-date with the latest network API. In addition, add the missing EXPORT_SYMBOL_GPL to the functions listed in pvcalls-front.h. Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com> Reviewed-by: Juergen Gross <jgross@suse.com> Message-ID: <alpine.DEB.2.22.394.2501201537560.11086@ubuntu-linux-20-04-desktop> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Linus Torvalds
|
4c551165e7 |
Updates for the interrupt subsystem:
- Consolidation of the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting. Some
interrupt chips require that affinity changes are made from the context
of handling an interrupt to avoid certain race conditions. For x86 this
was the default, but with interrupt remapping this requirement was
lifted and a flag was introduced which tells the core code that
affinity changes can be done in any context. Unrestricted affinity
changes are the default for the majority of interrupt chips. RISCV has
the requirement to add the deferred mode to one of it's interrupt
controllers, but with the original implementation this would require to
add the any context flag to all other RISC-V interrupt chips. That's
backwards, so reverse the logic and require that chips, which need the
deferred mode have to be marked accordingly. That avoids chasing the
'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
-----BEGIN PGP SIGNATURE-----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=q4rj
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
- Consolidate the machine_kexec_mask_interrupts() by providing a
generic implementation and replacing the copy & pasta orgy in the
relevant architectures.
- Prevent unconditional operations on interrupt chips during kexec
shutdown, which can trigger warnings in certain cases when the
underlying interrupt has been shut down before.
- Make the enforcement of interrupt handling in interrupt context
unconditionally available, so that it actually works for non x86
related interrupt chips. The earlier enablement for ARM GIC chips set
the required chip flag, but did not notice that the check was hidden
behind a config switch which is not selected by ARM[64].
- Decrapify the handling of deferred interrupt affinity setting.
Some interrupt chips require that affinity changes are made from the
context of handling an interrupt to avoid certain race conditions.
For x86 this was the default, but with interrupt remapping this
requirement was lifted and a flag was introduced which tells the core
code that affinity changes can be done in any context. Unrestricted
affinity changes are the default for the majority of interrupt chips.
RISCV has the requirement to add the deferred mode to one of it's
interrupt controllers, but with the original implementation this
would require to add the any context flag to all other RISC-V
interrupt chips. That's backwards, so reverse the logic and require
that chips, which need the deferred mode have to be marked
accordingly. That avoids chasing the 'sane' chips and marking them.
- Add multi-node support to the Loongarch AVEC interrupt controller
driver.
- The usual tiny cleanups, fixes and improvements all over the place.
* tag 'irq-core-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/generic_chip: Export irq_gc_mask_disable_and_ack_set()
genirq/timings: Add kernel-doc for a function parameter
genirq: Remove IRQ_MOVE_PCNTXT and related code
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
genirq: Provide IRQCHIP_MOVE_DEFERRED
hexagon: Remove GENERIC_PENDING_IRQ leftover
ARC: Remove GENERIC_PENDING_IRQ
genirq: Remove handle_enforce_irqctx() wrapper
genirq: Make handle_enforce_irqctx() unconditionally available
irqchip/loongarch-avec: Add multi-nodes topology support
irqchip/ts4800: Replace seq_printf() by seq_puts()
irqchip/ti-sci-inta : Add module build support
irqchip/ti-sci-intr: Add module build support
irqchip/irq-brcmstb-l2: Replace brcmstb_l2_mask_and_ack() by generic function
irqchip: keystone: Use syscon_regmap_lookup_by_phandle_args
genirq/kexec: Prevent redundant IRQ masking by checking state before shutdown
kexec: Consolidate machine_kexec_mask_interrupts() implementation
genirq: Reuse irq_thread_fn() for forced thread case
genirq: Move irq_thread_fn() further up in the code
|
||
|
Sergio Miguéns Iglesias
|
f839f532c9 |
xen: pcpu: remove unnecessary __ref annotation
The __ref annotation has been there since many years now, but the reason why it has been added has been removed from the code long ago. [jgross: clarify commit message] Cc: Juergen Gross <jgross@suse.com> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: xen-devel@lists.xenproject.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Sergio Miguéns Iglesias <sergio@lony.xyz> Reviewed-by: Juergen Gross <jgross@suse.com> Message-ID: <20241202085910.5539-1-sergio@lony.xyz> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Thomas Gleixner
|
7d04319a05 |
x86/apic: Convert to IRQCHIP_MOVE_DEFERRED
Instead of marking individual interrupts as safe to be migrated in arbitrary contexts, mark the interrupt chips, which require the interrupt to be moved in actual interrupt context, with the new IRQCHIP_MOVE_DEFERRED flag. This makes more sense because this is a per interrupt chip property and not restricted to individual interrupts. That flips the logic from the historical opt-out to a opt-in model. This is simpler to handle for other architectures, which default to unrestricted affinity setting. It also allows to cleanup the redundant core logic significantly. All interrupt chips, which belong to a top-level domain sitting directly on top of the x86 vector domain are marked accordingly, unless the related setup code marks the interrupts with IRQ_MOVE_PCNTXT, i.e. XEN. No functional change intended. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Steve Wahl <steve.wahl@hpe.com> Acked-by: Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/all/20241210103335.563277044@linutronix.de |
||
|
Peter Zijlstra
|
cdd30ebb1b |
module: Convert symbol namespace to string literal
Clean up the existing export namespace code along the same lines of
commit
|
||
|
Linus Torvalds
|
e70140ba0d |
Get rid of 'remove_new' relic from platform driver struct
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
5c2b050848 |
A set of updates for the interrupt subsystem:
- Tree wide:
* Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
- Core code:
* Prevent freeing an interrupt in the devres code which is not managed
by devres in the first place.
* Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
* Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which checks
whether ksoftirqd should be woken up. The latter is a pointless
exercise as both soft interrupts are raised in the context of the
timer interrupt and therefore never wake up ksoftirqd.
* Delegate timer/hrtimer soft interrupt processing to a dedicated thread
on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
- Drivers:
* New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
* Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU cluster
has its own GIC (Generic Interrupt Controller). This requires to
access the GIC of a remote cluster through a redirect register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC details.
* Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
* Small cleanups and fixes all over the place
-----BEGIN PGP SIGNATURE-----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=JqxC
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt subsystem updates from Thomas Gleixner:
"Tree wide:
- Make nr_irqs static to the core code and provide accessor functions
to remove existing and prevent future aliasing problems with local
variables or function arguments of the same name.
Core code:
- Prevent freeing an interrupt in the devres code which is not
managed by devres in the first place.
- Use seq_put_decimal_ull_width() for decimal values output in
/proc/interrupts which increases performance significantly as it
avoids parsing the format strings over and over.
- Optimize raising the timer and hrtimer soft interrupts by using the
'set bit only' variants instead of the combined version which
checks whether ksoftirqd should be woken up. The latter is a
pointless exercise as both soft interrupts are raised in the
context of the timer interrupt and therefore never wake up
ksoftirqd.
- Delegate timer/hrtimer soft interrupt processing to a dedicated
thread on RT.
Timer and hrtimer soft interrupts are always processed in ksoftirqd
on RT enabled kernels. This can lead to high latencies when other
soft interrupts are delegated to ksoftirqd as well.
The separate thread allows to run them seperately under a RT
scheduling policy to reduce the latency overhead.
Drivers:
- New drivers or extensions of existing drivers to support Renesas
RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
chips
- Support for multi-cluster GICs on MIPS.
MIPS CPUs can come with multiple CPU clusters, where each CPU
cluster has its own GIC (Generic Interrupt Controller). This
requires to access the GIC of a remote cluster through a redirect
register block.
This is encapsulated into a set of helper functions to keep the
complexity out of the actual code paths which handle the GIC
details.
- Support for encrypted guests in the ARM GICV3 ITS driver
The ITS page needs to be shared with the hypervisor and therefore
must be decrypted.
- Small cleanups and fixes all over the place"
* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
genirq/proc: Use seq_put_decimal_ull_width() for decimal values
softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
timers: Use __raise_softirq_irqoff() to raise the softirq.
hrtimer: Use __raise_softirq_irqoff() to raise the softirq
riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
irqchip: Add T-HEAD C900 ACLINT SSWI driver
dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
irqchip/mips-gic: Multi-cluster support
irqchip/mips-gic: Setup defaults in each cluster
irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
irqchip/mips-gic: Replace open coded online CPU iterations
genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
genirq/devres: Don't free interrupt which is not managed by devres
irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
irqchip/aspeed-intc: Add AST27XX INTC support
dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
...
|
||
|
Linus Torvalds
|
158f238aa6 |
xen: branch for v6.13-rc1
-----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZzd0YQAKCRCAXGG7T9hj vm1JAQDBZKpEkPFrxy969YFNCSUiUj42+rDRI3OJt8y0CGTS2AEA53+B+/DYDm8i syw5eaSJv4uohary659ywZUdSljPig4= =MHOT -----END PGP SIGNATURE----- Merge tag 'for-linus-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - a series for booting as a PVH guest, doing some cleanups after the previous work to make PVH boot code position independent - a fix of the xenbus driver avoiding a leak in an error case * tag 'for-linus-6.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Fix the issue of resource not being properly released in xenbus_dev_probe() x86/pvh: Avoid absolute symbol references in .head.text x86/xen: Avoid relocatable quantities in Xen ELF notes x86/pvh: Omit needless clearing of phys_base x86/pvh: Use correct size value in GDT descriptor x86/pvh: Call C code via the kernel virtual mapping |
||
|
Linus Torvalds
|
0f25f0e4ef |
the bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same
scope where they'd been created, getting rid of reassignments
and passing them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZzdikAAKCRBZ7Krx/gZQ
69nJAQCmbQHK3TGUbQhOw6MJXOK9ezpyEDN3FZb4jsu38vTIdgEA6OxAYDO2m2g9
CN18glYmD3wRyU6Bwl4vGODouSJvDgA=
=gVH3
-----END PGP SIGNATURE-----
Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull 'struct fd' class updates from Al Viro:
"The bulk of struct fd memory safety stuff
Making sure that struct fd instances are destroyed in the same scope
where they'd been created, getting rid of reassignments and passing
them by reference, converting to CLASS(fd{,_pos,_raw}).
We are getting very close to having the memory safety of that stuff
trivial to verify"
* tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
deal with the last remaing boolean uses of fd_file()
css_set_fork(): switch to CLASS(fd_raw, ...)
memcg_write_event_control(): switch to CLASS(fd)
assorted variants of irqfd setup: convert to CLASS(fd)
do_pollfd(): convert to CLASS(fd)
convert do_select()
convert vfs_dedupe_file_range().
convert cifs_ioctl_copychunk()
convert media_request_get_by_fd()
convert spu_run(2)
switch spufs_calls_{get,put}() to CLASS() use
convert cachestat(2)
convert do_preadv()/do_pwritev()
fdget(), more trivial conversions
fdget(), trivial conversions
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
o2hb_region_dev_store(): avoid goto around fdget()/fdput()
introduce "fd_pos" class, convert fdget_pos() users to it.
fdget_raw() users: switch to CLASS(fd_raw)
convert vmsplice() to CLASS(fd)
...
|
||
|
Qiu-ji Chen
|
afc545da38 |
xen: Fix the issue of resource not being properly released in xenbus_dev_probe()
This patch fixes an issue in the function xenbus_dev_probe(). In the
xenbus_dev_probe() function, within the if (err) branch at line 313, the
program incorrectly returns err directly without releasing the resources
allocated by err = drv->probe(dev, id). As the return value is non-zero,
the upper layers assume the processing logic has failed. However, the probe
operation was performed earlier without a corresponding remove operation.
Since the probe actually allocates resources, failing to perform the remove
operation could lead to problems.
To fix this issue, we followed the resource release logic of the
xenbus_dev_remove() function by adding a new block fail_remove before the
fail_put block. After entering the branch if (err) at line 313, the
function will use a goto statement to jump to the fail_remove block,
ensuring that the previously acquired resources are correctly released,
thus preventing the reference count leak.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and detecting potential issues where resources are not properly managed.
In this case, the tool flagged the missing release operation as a
potential problem, which led to the development of this patch.
Fixes:
|
||
|
Al Viro
|
66635b0776 |
assorted variants of irqfd setup: convert to CLASS(fd)
in all of those failure exits prior to fdget() are plain returns and the only thing done after fdput() is (on failure exits) a kfree(), which can be done before fdput() just fine. NOTE: in acrn_irqfd_assign() 'fail:' failure exit is wrong for eventfd_ctx_fileget() failure (we only want fdput() there) and once we stop doing that, it doesn't need to check if eventfd is NULL or ERR_PTR(...) there. NOTE: in privcmd we move fdget() up before the allocation - more to the point, before the copy_from_user() attempt. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Al Viro
|
46b5e18ae8 |
privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget()
just call it, same as privcmd_ioeventfd_deassign() does... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> |
||
|
Jiqian Chen
|
0fd2a74330 |
xen: Remove dependency between pciback and privcmd
Commit |
||
|
Bart Van Assche
|
3e48fa2ecf |
xen/events: Switch to irq_get_nr_irqs()
Use the irq_get_nr_irqs() function instead of the global variable 'nr_irqs'. Prepare for changing 'nr_irqs' from an exported global variable into a variable with file scope. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20241015190953.1266194-20-bvanassche@acm.org |
||
|
Lukas Bulwahn
|
9af48210ea |
xen: Fix config option reference in XEN_PRIVCMD definition
Commit |
||
|
Linus Torvalds
|
653608c67a |
xen: branch for v6.12-rc1a
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZvZ8dgAKCRCAXGG7T9hj
vhirAQCR1LAU+czZlqmx6jmKRPTGff1ss66vh04XbtgTjH+8PQEA8O5KvD/KnnxY
AnrOvrx6fTLwR6iTN7ANVvPO3kGK/w0=
=0Tol
-----END PGP SIGNATURE-----
Merge tag 'for-linus-6.12-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull more xen updates from Juergen Gross:
"A second round of Xen related changes and features:
- a small fix of the xen-pciback driver for a warning issued by
sparse
- support PCI passthrough when using a PVH dom0
- enable loading the kernel in PVH mode at arbitrary addresses,
avoiding conflicts with the memory map when running as a Xen dom0
using the host memory layout"
* tag 'for-linus-6.12-rc1a-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pvh: Add 64bit relocation page tables
x86/kernel: Move page table macros to header
x86/pvh: Set phys_base when calling xen_prepare_pvh()
x86/pvh: Make PVH entrypoint PIC for x86-64
xen: sync elfnote.h from xen tree
xen/pciback: fix cast to restricted pci_ers_result_t and pci_power_t
xen/privcmd: Add new syscall to get gsi from dev
xen/pvh: Setup gsi for passthrough device
xen/pci: Add a function to reset device for xen
|
||
|
Al Viro
|
cb787f4ac0 |
[tree-wide] finally take no_llseek out
no_llseek had been defined to NULL two years ago, in commit
|
||
|
Min-Hua Chen
|
8f2f74f2f3 |
xen/pciback: fix cast to restricted pci_ers_result_t and pci_power_t
This patch fix the following sparse warning by applying __force cast to pci_ers_result_t and pci_power_t. drivers/xen/xen-pciback/pci_stub.c:760:16: sparse: warning: cast to restricted pci_ers_result_t drivers/xen/xen-pciback/conf_space_capability.c:125:22: sparse: warning: cast to restricted pci_power_t No functional changes intended. Signed-off-by: Min-Hua Chen <minhuadotchen@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Message-ID: <20240917233653.61630-1-minhuadotchen@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Jiqian Chen
|
2fae6bb7be |
xen/privcmd: Add new syscall to get gsi from dev
On PVH dom0, when passthrough a device to domU, QEMU and xl tools want to use gsi number to do pirq mapping, see QEMU code xen_pt_realize->xc_physdev_map_pirq, and xl code pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is wrong, because irq is not equal with gsi, they are in different spaces, so pirq mapping fails. And in current linux codes, there is no method to get gsi for userspace. For above purpose, record gsi of pcistub devices when init pcistub and add a new syscall into privcmd to let userspace can get gsi when they have a need. Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <20240924061437.2636766-4-Jiqian.Chen@amd.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Jiqian Chen
|
b166b8ab41 |
xen/pvh: Setup gsi for passthrough device
In PVH dom0, the gsis don't get registered, but the gsi of a passthrough device must be configured for it to be able to be mapped into a domU. When assigning a device to passthrough, proactively setup the gsi of the device during that process. Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <20240924061437.2636766-3-Jiqian.Chen@amd.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Jiqian Chen
|
88801d043b |
xen/pci: Add a function to reset device for xen
When device on dom0 side has been reset, the vpci on Xen side won't get notification, so that the cached state in vpci is all out of date with the real device state. To solve that problem, add a new function to clear all vpci device state when device is reset on dom0 side. And call that function in pcistub_init_device. Because when using "pci-assignable-add" to assign a passthrough device in Xen, it will reset passthrough device and the vpci state will out of date, and then device will fail to restore bar state. Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> Signed-off-by: Huang Rui <ray.huang@amd.com> Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-ID: <20240924061437.2636766-2-Jiqian.Chen@amd.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Linus Torvalds
|
f8ffbc365f |
struct fd layout change (and conversion to accessor helpers)
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZvDNmgAKCRBZ7Krx/gZQ 63zrAP9vI0rf55v27twiabe9LnI7aSx5ckoqXxFIFxyT3dOYpQD/bPmoApnWDD3d 592+iDgLsema/H/0/CqfqlaNtDNY8Q0= =HUl5 -----END PGP SIGNATURE----- Merge tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 'struct fd' updates from Al Viro: "Just the 'struct fd' layout change, with conversion to accessor helpers" * tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: add struct fd constructors, get rid of __to_fd() struct fd: representation change introduce fd_file(), convert all accessors to it. |
||
|
Linus Torvalds
|
726e2d0cf2 |
dma-mapping updates for linux 6.12
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed,
Christoph Hellwig)
-----BEGIN PGP SIGNATURE-----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=DZVc
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
|
||
|
Juergen Gross
|
c3dea3d54f |
xen/swiotlb: fix allocated size
The allocated size in xen_swiotlb_alloc_coherent() and
xen_swiotlb_free_coherent() is calculated wrong for the case of
XEN_PAGE_SIZE not matching PAGE_SIZE. Fix that.
Fixes:
|
||
|
Juergen Gross
|
9f40ec84a7 |
xen/swiotlb: add alignment check for dma buffers
When checking a memory buffer to be consecutive in machine memory,
the alignment needs to be checked, too. Failing to do so might result
in DMA memory not being aligned according to its requested size,
leading to error messages like:
4xxx 0000:2b:00.0: enabling device (0140 -> 0142)
4xxx 0000:2b:00.0: Ring address not aligned
4xxx 0000:2b:00.0: Failed to initialise service qat_crypto
4xxx 0000:2b:00.0: Resetting device qat_dev0
4xxx: probe of 0000:2b:00.0 failed with error -14
Fixes:
|
||
|
Gustavo A. R. Silva
|
a8d0b5eb3f |
xen/pci: Avoid -Wflex-array-member-not-at-end warning
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of a flexible structure where the size of the flexible-array member is known at compile-time, and refactor the rest of the code, accordingly. So, with this, fix the following warning: drivers/xen/pci.c:48:55: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <kees@kernel.org> Message-ID: <ZsU58MvoYEEqBHZl@elsanto> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Shen Lichuan
|
3adc73efad |
xen/xenbus: Convert to use ERR_CAST()
Use ERR_CAST() as it is designed for casting an error pointer to another type. This macro utilizes the __force and __must_check modifiers, which instruct the compiler to verify for errors at the locations where it is employed. Signed-off-by: Shen Lichuan <shenlichuan@vivo.com> Reviewed-by: Juergen Gross <jgross@suse.com> Message-ID: <20240829084710.30312-1-shenlichuan@vivo.com> Signed-off-by: Juergen Gross <jgross@suse.com> |
||
|
Christoph Hellwig
|
de6c85bf91 |
dma-mapping: clearly mark DMA ops as an architecture feature
DMA ops are a helper for architectures and not for drivers to override the DMA implementation. Unfortunately driver authors keep ignoring this. Make the fact more clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers overriding their dma_ops depend on that. These drivers should probably be marked broken, but we can give them a bit of a grace period for that. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6 Acked-by: Robin Murphy <robin.murphy@arm.com> |
||
|
Al Viro
|
1da91ea87a |
introduce fd_file(), convert all accessors to it.
For any changes of struct fd representation we need to
turn existing accesses to fields into calls of wrappers.
Accesses to struct fd::flags are very few (3 in linux/file.h,
1 in net/socket.c, 3 in fs/overlayfs/file.c and 3 more in
explicit initializers).
Those can be dealt with in the commit converting to
new layout; accesses to struct fd::file are too many for that.
This commit converts (almost) all of f.file to
fd_file(f). It's not entirely mechanical ('file' is used as
a member name more than just in struct fd) and it does not
even attempt to distinguish the uses in pointer context from
those in boolean context; the latter will be eventually turned
into a separate helper (fd_empty()).
NOTE: mass conversion to fd_empty(), tempting as it
might be, is a bad idea; better do that piecewise in commit
that convert from fdget...() to CLASS(...).
[conflicts in fs/fhandle.c, kernel/bpf/syscall.c, mm/memcontrol.c
caught by git; fs/stat.c one got caught by git grep]
[fs/xattr.c conflict]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
||
|
Linus Torvalds
|
c2a96b7f18 |
Driver core changes for 6.11-rc1
Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases to
get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions. It's not all that useful for a "write a whole driver
in rust" type of thing, but the firmware bindings do help out the
phy rust drivers, and the driver core bindings give a solid base on
which others can start their work. There is still a long way to go
here before we have a multitude of rust drivers being added, but
it's a great first step.
- driver core const api changes. This reached across all bus types,
and there are some fix-ups for some not-common bus types that
linux-next and 0-day testing shook out. This work is being done to
help make the rust bindings more safe, as well as the C code, moving
toward the end-goal of allowing us to put driver structures into
read-only memory. We aren't there yet, but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZqH+aQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymoOQCfVBdLcBjEDAGh3L8qHRGMPy4rV2EAoL/r+zKm
cJEYtJpGtWX6aAtugm9E
=ZyJV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the big set of driver core changes for 6.11-rc1.
Lots of stuff in here, with not a huge diffstat, but apis are evolving
which required lots of files to be touched. Highlights of the changes
in here are:
- platform remove callback api final fixups (Uwe took many releases
to get here, finally!)
- Rust bindings for basic firmware apis and initial driver-core
interactions.
It's not all that useful for a "write a whole driver in rust" type
of thing, but the firmware bindings do help out the phy rust
drivers, and the driver core bindings give a solid base on which
others can start their work.
There is still a long way to go here before we have a multitude of
rust drivers being added, but it's a great first step.
- driver core const api changes.
This reached across all bus types, and there are some fix-ups for
some not-common bus types that linux-next and 0-day testing shook
out.
This work is being done to help make the rust bindings more safe,
as well as the C code, moving toward the end-goal of allowing us to
put driver structures into read-only memory. We aren't there yet,
but are getting closer.
- minor devres cleanups and fixes found by code inspection
- arch_topology minor changes
- other minor driver core cleanups
All of these have been in linux-next for a very long time with no
reported problems"
* tag 'driver-core-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (55 commits)
ARM: sa1100: make match function take a const pointer
sysfs/cpu: Make crash_hotplug attribute world-readable
dio: Have dio_bus_match() callback take a const *
zorro: make match function take a const pointer
driver core: module: make module_[add|remove]_driver take a const *
driver core: make driver_find_device() take a const *
driver core: make driver_[create|remove]_file take a const *
firmware_loader: fix soundness issue in `request_internal`
firmware_loader: annotate doctests as `no_run`
devres: Correct code style for functions that return a pointer type
devres: Initialize an uninitialized struct member
devres: Fix memory leakage caused by driver API devm_free_percpu()
devres: Fix devm_krealloc() wasting memory
driver core: platform: Switch to use kmemdup_array()
driver core: have match() callback in struct bus_type take a const *
MAINTAINERS: add Rust device abstractions to DRIVER CORE
device: rust: improve safety comments
MAINTAINERS: add Danilo as FIRMWARE LOADER maintainer
MAINTAINERS: add Rust FW abstractions to FIRMWARE LOADER
firmware: rust: improve safety comments
...
|
||
|
Linus Torvalds
|
fbc90c042c |
- 875fa64577da ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |