Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/rtc/rtc-cros-ec.c:62:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/rtc/rtc-cros-ec.c:40:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/Z9PpPg06OK8ghNvm@kspp
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The hardware alarm only supports one-minute accuracy which is coarse and
disables UIE usage. Use the 1-second interrupt to achieve per-second
accuracy. It is activated once we hit the per-minute alarm. The new
feature is optional. When there is no 1-second interrupt, old behaviour
with per-minute accuracy is used as before. With this feature, all tests
of 'rtctest' are successfully passed.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250305101038.9933-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Qualcomm x1e80100 firmware sets the ownership of the RTC alarm to ADSP.
Thus writing to RTC alarm registers and receiving alarm interrupts is not
possible.
Add a qcom,no-alarm flag to support RTC on this platform.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20241015004945.3676-2-jonathan@marek.ca
[ johan: drop no_alarm flag and restructure probe() ]
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Sebastian Reichel <sre@kernel.org> # Lenovo T14s Gen6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250219134118.31017-5-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which the
driver can take into account.
On machines like the Lenovo ThinkPad X13s the PMIC RTC drifts about one
second every 3.5 hours, something which leads to repeated updates of the
offset when NTP synchronisation is enabled.
Reduce wear of the underlying flash storage (used for UEFI variables) by
deferring writes until shutdown in case they appear to be due to clock
drift.
As an example, deferring writes when the new offset differs up to 30 s
from the previous one reduces the number of writes on the X13s during a
ten day session with the machine not suspending for more than four days
in a row from up to 68 writes (every 3.5 h) to at most two (boot and
shutdown).
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Sebastian Reichel <sre@kernel.org> # Lenovo T14s Gen6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250219134118.31017-4-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
On many Qualcomm platforms the PMIC RTC control and time registers are
read-only so that the RTC time can not be updated. Instead an offset
needs be stored in some machine-specific non-volatile memory, which the
driver can take into account.
Add support for storing a 32-bit offset from the GPS time epoch in a
UEFI variable so that the RTC time can be set on such platforms.
The UEFI variable is
882f8c2b-9646-435f-8de5-f208ff80c1bd-RTCInfo
and holds a 12-byte structure where the first four bytes is a GPS time
offset in little-endian byte order.
Note that this format is not arbitrary as the variable is shared with
the UEFI firmware (and Windows).
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Tested-by: Steev Klimaszewski <steev@kali.org>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Sebastian Reichel <sre@kernel.org> # Lenovo T14s Gen6
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250219134118.31017-3-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
probe must not fail after devm_rtc_register_device is successful because
the character device will be seen by userspace and may be opened right
away. Call it last to avoid opening the race window.
Link: https://lore.kernel.org/r/20250303223600.1135142-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
If the RTC is not enabled and the code attempts to disable the interrupt,
the readb_poll_timeout_atomic() function in the
rtca3_alarm_irq_set_helper() may timeout, leading to probe failures.
This issue is reproducible on some devices because the initial values of
the PIE and AIE bits in the RCR1 register are undefined.
To prevent probe failures in this scenario, disable RTC interrupts only
when the RTC is actually enabled.
Fixes: d448837760 ("rtc: renesas-rtca3: Add driver for RTCA-3 available on Renesas RZ/G3S SoC")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20250205095519.2031742-1-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
dev_err_probe() exists to simplify code and harmonise error messages,
there's no reason not to use it here.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-16-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
dev_err_probe() exists to simplify code and harmonise error messages,
there's no reason not to use it here.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-15-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Since this now means that the structure has just one member only left,
there is no need anymore to allocate data for it and pass that around
via the various callbacks, just to extract that one member.
Instead, we can just pass that one member and avoid the extra memory
allocation for the containing struct, reducing runtime memory
consumption.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-14-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Tested-by: Tóth János <gomba007@gmail.com>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-13-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-12-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Since this now means that the structure has just one member only left,
there is no need anymore to allocate data for it and pass that around
via the various callbacks, just to extract that one member.
Instead, we can just pass that one member and avoid the extra memory
allocation for the containing struct, reducing runtime memory
consumption.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-11-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-10-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-9-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-8-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-7-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc_dev member is managed via devres,
and no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-6-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-5-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc member is managed via devres, and
no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-4-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The memory pointed to by the ::rtc_dev member is managed via devres,
and no code in this driver uses it past _probe().
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-3-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When this driver was converted to using the devres managed i2c device
in commit 7db7ad0817 ("rtc: s5m: use devm_i2c_new_dummy_device()"),
struct s5m_rtc_info::i2c became essentially unused.
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-2-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When this driver was converted to using the devres managed i2c device
in commit 59a7f24fce ("rtc: max77686: convert to
devm_i2c_new_dummy_device()"), struct max77686_rtc_info::rtc became
essentially unused.
We can drop it from the structure and just use a local temporary
variable, reducing runtime memory consumption by a few bytes.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250304-rtc-cleanups-v2-1-d4689a71668c@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use devm_pm_set_wake_irq and devm_device_init_wakeup to cleanup the
error handling code and 'driver.remove()' hook.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250205-rtc-cleanup-v1-7-66165678e089@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use devm_pm_set_wake_irq and devm_device_init_wakeup to cleanup the
error handling code and 'driver.remove()' hook.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250205-rtc-cleanup-v1-5-66165678e089@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use devm_pm_set_wake_irq, then the 'driver.remove()' could be cleaned up.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250205-rtc-cleanup-v1-4-66165678e089@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use devm_pm_set_wake_irq and devm_device_init_wakeup to cleanup the
error handling code and 'driver.remove()' hook.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250205-rtc-cleanup-v1-2-66165678e089@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use devm_pm_set_wake_irq and devm_device_init_wakeup to cleanup the
error handling code and 'driver.remove()' hook.
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20250205-rtc-cleanup-v1-1-66165678e089@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
For !ACPI builds, the acpi_device_id table will not be referenced
because of ACPI_PTR:
rtc-fsl-ftm-alarm.c:312:36: error: unused variable 'ftm_imx_acpi_ids' [-Werror,-Wunused-const-variable]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250222114146.162835-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
hrtimer_setup() takes the callback function pointer as argument and
initializes the timer completely.
Replace hrtimer_init() and the open coded initialization of
hrtimer::function with the new setup mechanism.
Patch was created by using Coccinelle.
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Zack Rusin <zack.rusin@broadcom.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/all/22f3f087ddbab1708583033c07c3b7fb17810110.1738746904.git.namcao@linutronix.de
Subsystem:
- use boolean values with device_init_wakeup()
Drivers:
- pcf2127: add BSM support
- pcf85063: fix possible out of bound write
-----BEGIN PGP SIGNATURE-----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=BxV0
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Not much this cycle, there are multiple small fixes.
Core:
- use boolean values with device_init_wakeup()
Drivers:
- pcf2127: add BSM support
- pcf85063: fix possible out of bounds write"
* tag 'rtc-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: add BSM support
rtc: Remove hpet_rtc_dropped_irq()
dt-bindings: rtc: mxc: Document fsl,imx31-rtc
rtc: stm32: Use syscon_regmap_lookup_by_phandle_args
rtc: zynqmp: Fix optional clock name property
rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()
rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read
rtc: tps6594: Fix integer overflow on 32bit systems
rtc: use boolean values with device_init_wakeup()
rtc: RTC_DRV_SPEAR should not default to y when compile-testing
The pcf2127 encodes BSM, BLD and power fail detection in the same set of
bits so it is necessary to do some calculation when changing BSM to keep
the rest of the configuration as-is. However, when BSM is disabled, there
is no configuration with BLD enabled so this will be lost when coming back
to a mode with BSM enabled.
Link: https://lore.kernel.org/r/20250127162728.86234-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
hpet_rtc_dropped_irq() has been unused since
commit f52ef24be2 ("rtc/alpha: remove legacy rtc driver")
Remove it in rtc, and x86 hpet code.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20241215022356.181625-1-linux@treblig.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use syscon_regmap_lookup_by_phandle_args() which is a wrapper over
syscon_regmap_lookup_by_phandle() combined with getting the syscon
argument. Except simpler code this annotates within one line that given
phandle has arguments, so grepping for code would be easier.
There is also no real benefit in printing errors on missing syscon
argument, because this is done just too late: runtime check on
static/build-time data. Dtschema and Devicetree bindings offer the
static/build-time check for this already.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250111185405.183824-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Clock description in DT binding introduced by commit f69060c144
("dt-bindings: rtc: zynqmp: Add clock information") is talking about "rtc"
clock name but driver is checking "rtc_clk" name instead.
Because clock is optional property likely in was never handled properly by
the driver.
Fixes: 07dcc6f9c7 ("rtc: zynqmp: Add calibration set and get support")
Signed-off-by: Michal Simek <michal.simek@amd.com>
Cc: stable@kernel.org
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/cd5f0c9d01ec1f5a240e37a7e0d85b8dacb3a869.1732723280.git.michal.simek@amd.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The TOY_MATCH0_REG should be cleared to 0 in the RTC interrupt handler,
otherwise the interrupt cannot be cleared, which will cause the
loongson_rtc_isr() to be triggered multiple times.
The previous code cleared TOY_MATCH0_REG in the loongson_rtc_handler(),
which is an ACPI interrupt. This did not prevent loongson_rtc_isr()
from being triggered multiple times.
This commit moves the clearing of TOY_MATCH0_REG to the
loongson_rtc_isr() to ensure that the interrupt is properly cleared.
Fixes: 1b733a9ebc ("rtc: Add rtc driver for the Loongson family chips")
Signed-off-by: Ming Wang <wangming01@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Link: https://lore.kernel.org/r/20241205114307.1891418-1-wangming01@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The nvmem interface supports variable buffer sizes, while the regmap
interface operates with fixed-size storage. If an nvmem client uses a
buffer size less than 4 bytes, regmap_read will write out of bounds
as it expects the buffer to point at an unsigned int.
Fix this by using an intermediary unsigned int to hold the value.
Fixes: fadfd092ee ("rtc: pcf85063: add nvram support")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Link: https://lore.kernel.org/r/20241218-rtc-pcf85063-stack-corruption-v1-1-12fd0ee0f046@pengutronix.de
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The problem is this multiply in tps6594_rtc_set_offset()
tmp = offset * TICKS_PER_HOUR;
The "tmp" variable is an s64 but "offset" is a long in the
(-277774)-277774 range. On 32bit systems a long can hold numbers up to
approximately two billion. The number of TICKS_PER_HOUR is really large,
(32768 * 3600) or roughly a hundred million. When you start multiplying
by a hundred million it doesn't take long to overflow the two billion
mark.
Probably the safest way to fix this is to change the type of
TICKS_PER_HOUR to long long because it's such a large number.
Fixes: 9f67c1e639 ("rtc: tps6594: Add driver for TPS6594 RTC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/1074175e-5ecb-4e3d-b721-347d794caa90@stanley.mountain
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
device_init_wakeup() second argument is a bool type. Use proper boolean
values when calling it to match the type and to produce unambiguous code
which is easier to understand.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20241217071331.3607-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The undervoltage flags reported by the RTC are useful to know if the
time and date are reliable after a reboot. Although the threshold VLOW1
indicates that the thermometer has been shutdown and time compensation
is off, it doesn't mean that the temperature readout is currently
impossible.
As the system is running, the RTC voltage is now fully established and
we can read the temperature.
Fixes: 67075b63cc ("rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/r/20241122101031.68916-3-maxime.chevallier@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This RTC has special 32bit registers which return multiple of the same
8bit registers at once. Use these to minimize register access. Also, do
the to/from BCD conversions right away, so 'tm' always contains values
as described in time.h.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241122101448.4374-3-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The week register simply counts from 0 to 6 where the numbers do not
even represent a specific weekday. So we can adopt 'tm_wday' numbering
of the RTC core without converting it.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241122101448.4374-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
tps65010, have undergone minor code improvements to enhance consistency and
fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0 capability
for consistent register map configuration across syscons of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced regulator
put and ensure proper synchronization during driver removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant improvements,
including the use of IRQ domains for various devices, fixing IRQ domain names
duplication, and code refactoring for better consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break statement in
the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver, along
with ensuring a clear relationship between IDs and model names, and allowing
multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved power
management.
- The adp5585 driver has reduced its dependencies by dropping the obsolete
dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397 driver,
expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name from
IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing regmap_del_irq_chip()
in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML format
for better readability and maintainability.
-----BEGIN PGP SIGNATURE-----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=YP3r
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
- Several drivers, including atmel-flexcom/rk8xx-core, palmas, and
tps65010, have undergone minor code improvements to enhance
consistency and fix race conditions.
- The syscon driver now utilizes the regmap max_register_is_0
capability for consistent register map configuration across syscons
of all sizes.
- New device support has been added for QCS8300, qcs615, SA8255p, and
samsung,s2dos05, expanding the range of compatible hardware.
- The cros_ec driver now supports loading cros_ec_ucsi on supported ECs
and avoids loading the charger with UCSI, streamlining functionality.
- The bd96801 driver now utilizes the more modern maple tree register
cache, improving performance.
- The da9052-spi driver has undergone a fix to change the read-mask to
write-mask, preventing potential issues.
- Unused declarations in max77693 have been removed, and support for
samsung,s2dos05 has been added, enhancing code clarity and device
compatibility.
- Error handling in cs42l43 has been fixed to avoid unbalanced
regulator put and ensure proper synchronization during driver
removal.
- The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of
MODULE_ALIAS(), improving code consistency.
- Documentation for qcom,tcsr, syscon, and atmel-smc has been updated
and reorganized for better clarity and maintainability.
- The intel_soc_pmic_bxtwc driver has undergone significant
improvements, including the use of IRQ domains for various devices,
fixing IRQ domain names duplication, and code refactoring for better
consistency and maintainability.
- The ipaq-micro driver has received a fix for a missing break
statement in the default case, enhancing code robustness.
- Support for the AXP323 PMIC has been added to the axp20x driver,
along with ensuring a clear relationship between IDs and model names,
and allowing multiple regulators, broadening hardware compatibility.
- The cs42l43 driver now disables IRQs during suspend for improved
power management.
- The adp5585 driver has reduced its dependencies by dropping the
obsolete dependency on COMPILE_TEST.
- Initial support for the MT6328 PMIC has been added to the mt6397
driver, expanding the range of supported hardware.
- The rtc-bd70528 driver has been simplified by dropping the IC name
from IRQ, improving code readability.
- Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been
updated to enhance clarity and incorporate new features.
- The rt5033 driver has received a fix for a missing
regmap_del_irq_chip() in the error handling path.
- New device support has been added for MSM8917, and the
intel_soc_pmic_crc driver now supports non-ACPI instantiated
i2c_client.
- The 88pm886 driver has added support for the RTC cell, and the tqmx86
driver has improved its GPIO IRQ setup and added I2C IRQ support,
increasing functionality.
- The sprd,sc2731 DT schema has been updated and converted to YAML
format for better readability and maintainability.
* tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits)
dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm
dt-bindings: mfd: sprd,sc2731: Convert to YAML
mfd: tqmx86: Add I2C IRQ support
mfd: tqmx86: Make IRQ setup errors non-fatal
mfd: tqmx86: Refactor GPIO IRQ setup
mfd: tqmx86: Improve gpio_irq module parameter description
mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S
mfd: 88pm886: Add the RTC cell
dt-bindings: mfd: Add Realtek RTL9300 switch peripherals
mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client
mfd: intel_soc_pmic_*: Consistently use filename as driver name
dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917
mfd: rt5033: Fix missing regmap_del_irq_chip()
mfd: cgbc-core: Fix error handling paths in cgbc_init_device()
dt-bindings: mfd: aspeed: Support for AST2700
mfd: Switch back to struct platform_driver::remove()
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750
mfd: rtc: bd7xxxx Drop IC name from IRQ
mfd: mt6397: Add initial support for MT6328
mfd: adp5585: Drop obsolete dependency on COMPILE_TEST
...
The header clearly states that it does not want to be included directly,
only via 'device.h'. 'platform_device.h' works equally well. Remove the
direct inclusion.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20241118072917.3853-14-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Instead of hard-coded values and ifdefs, store the year offset in the
platform_data struct.
Tested-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Tested-by: Andreas Larsson <andreas@gaisler.com>
Acked-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/665c3526184a8d0c4a6373297d8e7d9a12591d8b.1731450735.git.fthain@linux-m68k.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
abeoz9_rtc_read_alarm assumes we always read the alarm in 12-hour mode
while abeoz9_rtc_set_alarm will always set it in 24-hour mode.
We could support 12-hour mode in both functions but it seems very unlikely
that the RTC would be set to 12-hour mode now as the driver has been
setting it to 24-hour mode for a while now. The setting is undefined at
power-up and unchanged by subsequent resets which doesn't help us.
Link: https://lore.kernel.org/r/20241112151119.3451611-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Read RV3028_TS_COUNT in an unsigned int so static checkers stop reporting a
mismatch between the format specifier and the type.
Reported-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20241111104711.3170865-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
tm_mon describes months from 0 to 11, but the register contains BCD from
1 to 12. tm_year contains years since 1900, but the BCD contains 20XX.
Apply the offsets when converting these numbers.
Fixes: deeb4b5393 ("rtc: rzn1: Add new RTC driver")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20241113113032.27409-1-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When compile rtc-a4, build error as following:
ERROR: modpost: drivers/rtc/rtc-amlogic-a4: struct of_device_id is
not terminated with a NULL entry!
This commit is to fix it.
Fixes: c89ac9182e ("rtc: support for the Amlogic on-chip RTC")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20241113-fix_a4_rtc-v1-1-307af26449a8@amlogic.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Drop error message because there is a high probability they will never be
seen and the final user action is clear, the time has to be set again.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241112143652.3445648-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This is the third amlogic driver. The RTC hardware of A4 SoC is different
from the previous one. This RTC hardware includes a timing function and
an alarm function. But the existing has only timing function, alarm
function is using the system clock to implement a virtual alarm. Add
the RTC driver to support it.
Signed-off-by: Yiting Deng <yiting.deng@amlogic.com>
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20241112-rtc-v6-2-a71b60d2f354@amlogic.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RTC lives on the chip's base register page. Add the relevant register
definitions and implement a basic set/read time functionality. Tested
with the samsung,coreprimevelte smartphone which contains this PMIC and
whose vendor kernel tree has also served as the sole reference for this.
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20241012193345.18594-2-balejk@matfyz.cz
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
If the __rtc_read_time call fails,, the struct rtc_time tm; may contain
uninitialized data, or an illegal date/time read from the RTC hardware.
When calling rtc_tm_to_ktime later, the result may be a very large value
(possibly KTIME_MAX). If there are periodic timers in rtc->timerqueue,
they will continually expire, may causing kernel softlockup.
Fixes: 6610e0893b ("RTC: Rework RTC code to use timerqueue for events")
Signed-off-by: Yongliang Gao <leonylgao@tencent.com>
Acked-by: Jingqun Li <jingqunli@tencent.com>
Link: https://lore.kernel.org/r/20241011043153.3788112-1-leonylgao@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Instead of calculating the number of full days since Sunday with
(days + 4) % 7, read (and write) that to the RTC Day-of-week Time
Counter register (RTC_TC_DOW).
Some transformation (addition and subtraction for set/get) is
still done, as this register's range is [1..7], while the tm_wday
in struct tm's range is [0..6].
Please note that this was added only to set_time() and read_time()
callbacks because set_alarm() and read_alarm() are setting a bit
in RTC_AL_MASK to ignore DOW for RTC HW alarms for unknown reasons.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240923100010.97470-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add the RTC hardware range parameters to enable the possibility
of using the `start-year` devicetree property which, if present,
will set the start_secs parameter by overriding the defaults
that this driver is setting;
To keep compatibility with (hence have the same date/time reading
as) the old behavior, set:
- range_min to 1900-01-01 00:00:00
- range_max to 2027-12-31 23:59:59 (HW year max range is 0-127)
- start_secs defaulting to 1968-01-02 00:00:00
Please note that the oddness of starting from January 2nd is not
a hardware quirk and it's done only to get the same date/time
reading as an RTC which time was set before this commit.
Also remove the RTC_MIN_YEAR_OFFSET addition and subtraction in
callbacks set_time() and read_time() respectively, as now this
is already done by the API.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20240923100010.97470-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Without remove hook to clear wake irq, there will be kernel dump when
doing module test.
"bbnsm_rtc 44440000.bbnsm:rtc: wake irq already initialized"
Add remove hook to clear wake irq and set wakeup to false.
Fixes: eb7b85853c ("rtc: bbnsm: Add the bbnsm rtc support")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20241111071130.1099978-1-peng.fan@oss.nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The ISL12022 RTC has a combined INT/fOUT pin, which can be used for alarm
interrupt when frequency output is not enabled.
The device-tree bindings should ensure that interrupt and clock output is
not enabled at the same time.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20240913-rtc-isl12022-alarm-irq-v2-2-37309d939723@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add a struct to hold the regmap pointer, so more information can be added.
This is morally a revert of commit f525b210e9 ("rtc: isl12022: Get rid of
unneeded private struct isl12022").
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Esben Haabendal <esben@geanix.com>
Link: https://lore.kernel.org/r/20240913-rtc-isl12022-alarm-irq-v2-1-37309d939723@geanix.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The is_leap_year() for determining leap year is provided in rtc lib.
This uses is_leap_year() instead of its own leap year determination
routine.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/20241007233618.1442937-1-nobuhiro1.iwamatsu@toshiba.co.jp
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
If request_irq() fails in st_rtc_probe(), there is no need to enable
the irq, and if it succeeds, disable_irq() after request_irq() still has
a time gap in which interrupts can come.
request_irq() with IRQF_NO_AUTOEN flag will disable IRQ auto-enable when
request IRQ.
Fixes: b5b2bdfc28 ("rtc: st: Add new driver for ST's LPC RTC")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240912033727.3013951-1-ruanjinjie@huawei.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/rtc to use .remove(), with
the eventual goal to drop struct platform_driver::remove_new(). As
.remove() and .remove_new() have the same prototypes, conversion is done
by just changing the structure member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20241007205803.444994-6-u.kleine-koenig@baylibre.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix the following compilation errors when building the RTCA3 for RISCV:
../drivers/rtc/rtc-renesas-rtca3.c:270:23: error: call to undeclared function 'FIELD_GET'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
270 | tm->tm_sec = bcd2bin(FIELD_GET(RTCA3_RSECCNT_SEC, sec));
| ^
../drivers/rtc/rtc-renesas-rtca3.c:369:23: error: call to undeclared function 'FIELD_GET'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
369 | tm->tm_sec = bcd2bin(FIELD_GET(RTCA3_RSECAR_SEC, sec));
| ^
../drivers/rtc/rtc-renesas-rtca3.c:476:11: error: call to undeclared function 'FIELD_GET'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
476 | cycles = FIELD_GET(RTCA3_RADJ_ADJ, radj);
| ^
../drivers/rtc/rtc-renesas-rtca3.c:523:9: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
523 | radj = FIELD_PREP(RTCA3_RADJ_ADJ, abs(cycles));
| ^
../drivers/rtc/rtc-renesas-rtca3.c:658:8: error: call to undeclared function 'FIELD_PREP'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
658 | val = FIELD_PREP(RTCA3_RCR1_PES, RTCA3_RCR1_PES_1_64_SEC);
| ^
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241101095720.2247815-5-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
A few ROHM PMICs have an RTC block which can be controlled by the
rtc-bd70528 driver. The RTC driver needs the alarm interrupt information
from the parent MFD driver. The MFD driver provides the interrupt
information as a set of named interrupts, where the name is of form:
<PMIC model>-rtc-alm-<x>, where x is an alarm block number.
>From the RTC driver point of view it is irrelevant what the PMIC name
is. It is sufficient to know this is alarm interrupt for a block X. The
PMIC model information is carried to RTC via the platform device ID.
Hence, having the PMIC model in the interrupt name is only making things
more complex because the RTC driver needs to request differently named
interrupts on different PMICs, making code unnecessary complicated.
Simplify this slightly by always using the RTC driver name 'bd70528' as
the prefix for alarm interrupts, no matter what the exact PMIC model is,
and always request the alarm interrupts of same name no matter what the
PMIC model is.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/ZvVNCfk10ih0YFLW@fedora
Signed-off-by: Lee Jones <lee@kernel.org>
On my device reading entirety of /sys/devices/pnp0/00:03/cmos_nvram0/nvmem
takes about 9 msec during which time interrupts are off on the CPU that
does the read and the thread that performs the read can not be migrated
or preempted by another higher priority thread (RT or not).
Allow readers and writers be preempted by taking and releasing rtc_lock
spinlock for each individual byte read or written rather than once per
read/write request.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Link: https://lore.kernel.org/r/Zxv8QWR21AV4ztC5@google.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC IP (RTCA-3) available on the Renesas RZ/G3S SoC has calendar count
mode and binary count mode (selectable though RCR2.CNTMD) capabilities,
alarm capabilities, clock error correction capabilities. It can generate
alarm, period, carry interrupts.
Add a driver for RTCA-3 IP. The driver implements calendar count mode (as
the conversion b/w RTC and system time is simpler, done with bcd2bin(),
bin2bcd()), read and set time, read and set alarm, read and set
an offset.
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://lore.kernel.org/r/20241030110120.332802-6-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range
-----BEGIN PGP SIGNATURE-----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=sjE7
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"More conversions of DT bindings to yaml. There is one new driver, for
the DFRobot SD2405AL and support for important features of the stm32
RTC. Summary:
New driver:
- DFRobot SD2405AL
Drivers:
- stm32: add alarm A out and LSCO support
- sun6i: disable automatic clock input switching
- m48t59: set range"
* tag 'rtc-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: rc5t619: use proper module tables
rtc: m48t59: set range
dt-bindings: rtc: microcrystal,rv3028: add #clock-cells property
rtc: m48t59: Remove division condition with direct comparison
rtc: at91sam9: fix OF node leak in probe() error path
rtc: sun6i: disable automatic clock input switching
dt-bindings: rtc: Drop non-trivial duplicate compatibles
dt-bindings: vendor-prefixes: Add DFRobot.
dt-bindings: rtc: Add support for SD2405AL.
rtc: Add driver for SD2405AL
rtc: s35390a: Drop vendorless compatible string from match table
rtc: twl: convert comma to semicolon
dt-bindings: rtc: sprd,sc2731-rtc: convert to YAML
rtc: stm32: add alarm A out feature
rtc: stm32: add Low Speed Clock Output (LSCO) support
rtc: stm32: add pinctrl and pinmux interfaces
dt-bindings: rtc: stm32: describe pinmux nodes
The V3(s) will detect a valid external low frequency clock and if it is
not present will automatically switch to the internal one. This might
hide bugs and (hardware) configuration errors. It's even worse because
the internal RTC runs significantly slower (32.000Hz vs 32.768Hz).
Fortunately for us, the V3(s) has an (undocumented) bypass of this
switching and the driver already supports it by setting the
.has_auto_swt flag.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20240730194905.2587202-1-mwalle@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There's no need to list "s35390a" in the DT match table. The I2C core
will strip any vendor prefix and match against the i2c_device_id table
which has an "s35390a" entry.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240826191321.1410668-1-robh@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The BBM module provides RTC feature. To i.MX95, this module is managed by
System Manager and exported System Control Management Interface(SCMI).
Linux could use i.MX SCMI BBM Extension protocol to use RTC feature.
This driver is to use SCMI interface to get/set RTC.
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-Id: <20240823-imx95-bbm-misc-v2-v8-6-e600ed9e9271@nxp.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
STM32 RTC can pulse some SOC pins when an RTC alarm expires.
This patch adds this functionality for alarm A. The pulse can out on three
pins RTC_OUT1, RTC_OUT2, RTC_OUT2_RMP (PC13, PB2, PI8 on stm32mp15)
(PC13, PB2, PI1 on stm32mp13) (PC13, PF4/PF6, PI8 on stm32mp25).
This patch only adds the functionality for devices which are using
st,stm32mp1-rtc and st,stm32mp25-rtc compatible.
Add "alarm-a" in pinmux functions.
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240722160022.454226-5-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
RTC is able to output on a pin the "LSE" internal clock.
STM32 RTC is now registered as a clock provider.
It provides rtc_lsco clock, that means RTC_LSCO is output on either
RTC_OUT1 or RTC_OUT2_RMP, depending on pinmux DT property.
The clock is marked as CLK_IGNORE_UNUSED and CLK_IS_CRITICAL because
RTC_LSCO can be early required by devices needed it to init.
Add LSCO in pinmux functions.
Add "stm32_rtc_clean_outs" to disable LSCO. As RTC is part of "backup"
power domain, it is not reset during shutdown or reboot. So force LSCO
disable at probe.
Co-developed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20240722160022.454226-4-valentin.caron@foss.st.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
