Drop the 'id' part of the attribute group name because we want to expose
non 'id' related attributes via the ns attribute group.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Drivers can poll requests directly, so use that. We just need to ensure
the driver's request was allocated from a polled hctx, so a special
driver flag is added to struct io_uring_cmd.
The allows unshared and multipath namespaces to use the same polling
callback, and multipath is guaranteed to get the same queue as the
command was submitted on. Previously multipath polling might check a
different path and poll the wrong info.
The other bonus is we don't need a bio payload in order to poll,
allowing commands like 'flush' and 'write zeroes' to be submitted on the
same high priority queue as read and write commands.
Finally, using the request based polling skips the unnecessary bio
overhead.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230612190343.2087040-3-kbusch@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It is possible that the next available path we failover to, happens to
be frozen (for example if it is during connection establishment). If
the original I/O was set with NOWAIT, this cause the I/O to unnecessarily
fail because the request queue cannot be entered, hence the I/O fails with
EAGAIN.
The NOWAIT restriction that was originally set for the I/O is no longer
relevant or needed because this is the nvme requeue context. Hence we
clear the REQ_NOWAIT flag when failing over I/O.
This fix a simple test case of nvme controller reset during I/O when the
multipath device that has only a single path and I/O fails with "Resource
temporarily unavailable" errno. Note that this reproduces with io_uring
which by default sets IOCB_NOWAIT by default.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zP4Y
-----END PGP SIGNATURE-----
Merge tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
The only overlap between the block open flags mapped into the fmode_t and
other uses of fmode_t are FMODE_READ and FMODE_WRITE. Define a new
blk_mode_t instead for use in blkdev_get_by_{dev,path}, ->open and
->ioctl and stop abusing fmode_t.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20230608110258.189493-28-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mode argument to the ->release block_device_operation is never used,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-10-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
->open is only called on the whole device. Make that explicit by
passing a gendisk instead of the block_device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Acked-by: Christian Brauner <brauner@kernel.org>
Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd]
Link: https://lore.kernel.org/r/20230608110258.189493-9-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull NVMe fixes from Keith:
"nvme fixes for Linux 6.4
- More device quirks (Sagi, Hristo, Adrian, Daniel)
- Controller delete race (Maurizo)
- Multipath cleanup fix (Christoph)"
* tag 'nvme-6.4-2023-05-18' of git://git.infradead.org/nvme:
nvme-pci: Add quirk for Teamgroup MP33 SSD
nvme: do not let the user delete a ctrl before a complete initialization
nvme-multipath: don't call blk_mark_disk_dead in nvme_mpath_remove_disk
nvme-pci: clamp max_hw_sectors based on DMA optimized limitation
nvme-pci: add quirk for missing secondary temperature thresholds
nvme-pci: add NVME_QUIRK_BOGUS_NID for HS-SSD-FUTURE 2048G
nvme_mpath_remove_disk is called after del_gendisk, at which point a
blk_mark_disk_dead call doesn't make any sense.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
While using iostat for raid, I observed very strange 'await'
occasionally, and turns out it's due to that 'ios' and 'sectors' is
counted in bdev_start_io_acct(), while 'nsecs' is counted in
bdev_end_io_acct(). I'm not sure why they are ccounted like that
but I think this behaviour is obviously wrong because user will get
wrong disk stats.
Fix the problem by counting 'ios' and 'sectors' when io is done, like
what rq-based device does.
Fixes: 394ffa503b ("blk: introduce generic io stat accounting help function")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=k/vv
-----END PGP SIGNATURE-----
Merge tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Christoph:
- Support some passthrough commands without CAP_SYS_ADMIN (Kanchan
Joshi)
- Refactor PCIe probing and reset (Christoph Hellwig)
- Various fabrics authentication fixes and improvements (Sagi
Grimberg)
- Avoid fallback to sequential scan due to transient issues (Uday
Shankar)
- Implement support for the DEAC bit in Write Zeroes (Christoph
Hellwig)
- Allow overriding the IEEE OUI and firmware revision in configfs
for nvmet (Aleksandr Miloserdov)
- Force reconnect when number of queue changes in nvmet (Daniel
Wagner)
- Minor fixes and improvements (Uros Bizjak, Joel Granados, Sagi
Grimberg, Christoph Hellwig, Christophe JAILLET)
- Fix and cleanup nvme-fc req allocation (Chaitanya Kulkarni)
- Use the common tagset helpers in nvme-pci driver (Christoph
Hellwig)
- Cleanup the nvme-pci removal path (Christoph Hellwig)
- Use kstrtobool() instead of strtobool (Christophe JAILLET)
- Allow unprivileged passthrough of Identify Controller (Joel
Granados)
- Support io stats on the mpath device (Sagi Grimberg)
- Minor nvmet cleanup (Sagi Grimberg)
- MD pull requests via Song:
- Code cleanups (Christoph)
- Various fixes
- Floppy pull request from Denis:
- Fix a memory leak in the init error path (Yuan)
- Series fixing some batch wakeup issues with sbitmap (Gabriel)
- Removal of the pktcdvd driver that was deprecated more than 5 years
ago, and subsequent removal of the devnode callback in struct
block_device_operations as no users are now left (Greg)
- Fix for partition read on an exclusively opened bdev (Jan)
- Series of elevator API cleanups (Jinlong, Christoph)
- Series of fixes and cleanups for blk-iocost (Kemeng)
- Series of fixes and cleanups for blk-throttle (Kemeng)
- Series adding concurrent support for sync queues in BFQ (Yu)
- Series bringing drbd a bit closer to the out-of-tree maintained
version (Christian, Joel, Lars, Philipp)
- Misc drbd fixes (Wang)
- blk-wbt fixes and tweaks for enable/disable (Yu)
- Fixes for mq-deadline for zoned devices (Damien)
- Add support for read-only and offline zones for null_blk
(Shin'ichiro)
- Series fixing the delayed holder tracking, as used by DM (Yu,
Christoph)
- Series enabling bio alloc caching for IRQ based IO (Pavel)
- Series enabling userspace peer-to-peer DMA (Logan)
- BFQ waker fixes (Khazhismel)
- Series fixing elevator refcount issues (Christoph, Jinlong)
- Series cleaning up references around queue destruction (Christoph)
- Series doing quiesce by tagset, enabling cleanups in drivers
(Christoph, Chao)
- Series untangling the queue kobject and queue references (Christoph)
- Misc fixes and cleanups (Bart, David, Dawei, Jinlong, Kemeng, Ye,
Yang, Waiman, Shin'ichiro, Randy, Pankaj, Christoph)
* tag 'for-6.2/block-2022-12-08' of git://git.kernel.dk/linux: (247 commits)
blktrace: Fix output non-blktrace event when blk_classic option enabled
block: sed-opal: Don't include <linux/kernel.h>
sed-opal: allow using IOC_OPAL_SAVE for locking too
blk-cgroup: Fix typo in comment
block: remove bio_set_op_attrs
nvmet: don't open-code NVME_NS_ATTR_RO enumeration
nvme-pci: use the tagset alloc/free helpers
nvme: add the Apple shared tag workaround to nvme_alloc_io_tag_set
nvme: only set reserved_tags in nvme_alloc_io_tag_set for fabrics controllers
nvme: consolidate setting the tagset flags
nvme: pass nr_maps explicitly to nvme_alloc_io_tag_set
block: bio_copy_data_iter
nvme-pci: split out a nvme_pci_ctrl_is_dead helper
nvme-pci: return early on ctrl state mismatch in nvme_reset_work
nvme-pci: rename nvme_disable_io_queues
nvme-pci: cleanup nvme_suspend_queue
nvme-pci: remove nvme_pci_disable
nvme-pci: remove nvme_disable_admin_queue
nvme: merge nvme_shutdown_ctrl into nvme_disable_ctrl
nvme: use nvme_wait_ready in nvme_shutdown_ctrl
...
Our mpath stack device is just a shim that selects a bottom namespace
and submits the bio to it without any fancy splitting. This also means
that we don't clone the bio or have any context to the bio beyond
submission. However it really sucks that we don't see the mpath device
io stats.
Given that the mpath device can't do that without adding some context
to it, we let the bottom device do it on its behalf (somewhat similar
to the approach taken in nvme_trace_bio_complete).
When the IO starts, we account the request for multipath IO stats using
REQ_NVME_MPATH_IO_STATS nvme_request flag to avoid queue io stats disable
in the middle of the request.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
NVMe spec requires all transports support dword aligned addresses, which
is already set in the namespace request_queue. Set the same limit in the
multipath device's request_queue as well.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When we revalidate paths as part of ns size change (as of commit
e7d65803e2), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.
The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.
Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.
A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--
Reported-by: Yogev Cohen <yogev@lightbitslabs.com>
Fixes: e7d65803e2 ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Store a cookie during submission, and use that to implement
completion-polling inside the ->uring_cmd_iopoll handler.
This handler makes use of existing bio poll facility.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/20220823161443.49436-5-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The double indirect bio leads to somewhat suboptimal code generation.
Instead return the (original or split) bio, and make sure the
request_queue arguments to the lower level helpers is passed after the
bio to avoid constant reshuffling of the argument passing registers.
Also give it and the helpers used to implement it more descriptive names.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220727162300.3089193-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 89b3d6e605 ("nvme: simplify the compat ioctl handling") removed
the initialization of compat_ioctl from the nvme block_device_operations
structures.
Presumably the expectation was that 32-bit ioctls would be directed
through the regular handler but this is not the case: failing to assign
.compat_ioctl actually means that the compat case is disabled entirely,
and any attempt to submit nvme ioctls from 32-bit userspace fails
outright with -ENOTTY.
For example:
% smartctl -x /dev/nvme0n1
[...]
Read NVMe Identify Controller failed: NVME_IOCTL_ADMIN_CMD: Inappropriate ioctl for device
The blkdev_compat_ptr_ioctl helper can be used to direct compat calls
through the main ioctl handler and makes things work again.
Fixes: 89b3d6e605 ("nvme: simplify the compat ioctl handling")
Signed-off-by: Nick Bowler <nbowler@draconx.ca>
Reviewed-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass anagrpid as second argument. This is prep patch that allows reusing
this function for supporting unknown command sets.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the zone related fields that are currently stored in
struct request_queue to struct gendisk as these are part of the highlevel
block layer API and are only used for non-passthrough I/O that requires
the gendisk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220706070350.1703384-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blk_cleanup_disk is nothing but a trivial wrapper for put_disk now,
so remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20220619060552.1850436-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Introduce handler for fops->uring_cmd(), implementing async passthru
on char device (/dev/ngX). The handler supports newly introduced
operation NVME_URING_CMD_IO. This operates on a new structure
nvme_uring_cmd, which is similar to struct nvme_passthru_cmd64 but
without the embedded 8b result field. This field is not needed since
uring-cmd allows to return additional result via big-CQE.
Signed-off-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511054750.20432-5-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=0Axq
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block
Pull block driver fixes from Jens Axboe:
"Followup block driver updates and fixes for the 5.18-rc1 merge window.
In detail:
- NVMe pull request
- Fix multipath hang when disk goes live over reconnect (Anton
Eidelman)
- fix RCU hole that allowed for endless looping in multipath
round robin (Chris Leech)
- remove redundant assignment after left shift (Colin Ian King)
- add quirks for Samsung X5 SSDs (Monish Kumar R)
- fix the read-only state for zoned namespaces with unsupposed
features (Pankaj Raghav)
- use a private workqueue instead of the system workqueue in
nvmet (Sagi Grimberg)
- allow duplicate NSIDs for private namespaces (Sungup Moon)
- expose use_threaded_interrupts read-only in sysfs (Xin Hao)"
- nbd minor allocation fix (Zhang)
- drbd fixes and maintainer addition (Lars, Jakob, Christoph)
- n64cart build fix (Jackie)
- loop compat ioctl fix (Carlos)
- misc fixes (Colin, Dongli)"
* tag 'for-5.18/drivers-2022-04-01' of git://git.kernel.dk/linux-block:
drbd: remove check of list iterator against head past the loop body
drbd: remove usage of list iterator variable after loop
nbd: fix possible overflow on 'first_minor' in nbd_dev_add()
MAINTAINERS: add drbd co-maintainer
drbd: fix potential silent data corruption
loop: fix ioctl calls using compat_loop_info
nvme-multipath: fix hang when disk goes live over reconnect
nvme: fix RCU hole that allowed for endless looping in multipath round robin
nvme: allow duplicate NSIDs for private namespaces
nvmet: remove redundant assignment after left shift
nvmet: use a private workqueue instead of the system workqueue
nvme-pci: add quirks for Samsung X5 SSDs
nvme-pci: expose use_threaded_interrupts read-only in sysfs
nvme: fix the read-only state for zoned namespaces with unsupposed features
n64cart: convert bi_disk to bi_bdev->bd_disk fix build
xen/blkfront: fix comment for need_copy
xen-blkback: remove redundant assignment to variable i
nvme_mpath_init_identify() invoked from nvme_init_identify() fetches a
fresh ANA log from the ctrl. This is essential to have an up to date
path states for both existing namespaces and for those scan_work may
discover once the ctrl is up.
This happens in the following cases:
1) A new ctrl is being connected.
2) An existing ctrl is successfully reconnected.
3) An existing ctrl is being reset.
While in (1) ctrl->namespaces is empty, (2 & 3) may have namespaces, and
nvme_read_ana_log() may call nvme_update_ns_ana_state().
This result in a hang when the ANA state of an existing namespace changes
and makes the disk live: nvme_mpath_set_live() issues IO to the namespace
through the ctrl, which does NOT have IO queues yet.
See sample hang below.
Solution:
- nvme_update_ns_ana_state() to call set_live only if ctrl is live
- nvme_read_ana_log() call from nvme_mpath_init_identify()
therefore only fetches and parses the ANA log;
any erros in this process will fail the ctrl setup as appropriate;
- a separate function nvme_mpath_update()
is called in nvme_start_ctrl();
this parses the ANA log without fetching it.
At this point the ctrl is live,
therefore, disks can be set live normally.
Sample failure:
nvme nvme0: starting error recovery
nvme nvme0: Reconnecting in 10 seconds...
block nvme0n6: no usable path - requeuing I/O
INFO: task kworker/u8:3:312 blocked for more than 122 seconds.
Tainted: G E 5.14.5-1.el7.elrepo.x86_64 #1
Workqueue: nvme-wq nvme_tcp_reconnect_ctrl_work [nvme_tcp]
Call Trace:
__schedule+0x2a2/0x7e0
schedule+0x4e/0xb0
io_schedule+0x16/0x40
wait_on_page_bit_common+0x15c/0x3e0
do_read_cache_page+0x1e0/0x410
read_cache_page+0x12/0x20
read_part_sector+0x46/0x100
read_lba+0x121/0x240
efi_partition+0x1d2/0x6a0
bdev_disk_changed.part.0+0x1df/0x430
bdev_disk_changed+0x18/0x20
blkdev_get_whole+0x77/0xe0
blkdev_get_by_dev+0xd2/0x3a0
__device_add_disk+0x1ed/0x310
device_add_disk+0x13/0x20
nvme_mpath_set_live+0x138/0x1b0 [nvme_core]
nvme_update_ns_ana_state+0x2b/0x30 [nvme_core]
nvme_update_ana_state+0xca/0xe0 [nvme_core]
nvme_parse_ana_log+0xac/0x170 [nvme_core]
nvme_read_ana_log+0x7d/0xe0 [nvme_core]
nvme_mpath_init_identify+0x105/0x150 [nvme_core]
nvme_init_identify+0x2df/0x4d0 [nvme_core]
nvme_init_ctrl_finish+0x8d/0x3b0 [nvme_core]
nvme_tcp_setup_ctrl+0x337/0x390 [nvme_tcp]
nvme_tcp_reconnect_ctrl_work+0x24/0x40 [nvme_tcp]
process_one_work+0x1bd/0x360
worker_thread+0x50/0x3d0
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A NVMe subsystem with multiple controller can have private namespaces
that use the same NSID under some conditions:
"If Namespace Management, ANA Reporting, or NVM Sets are supported, the
NSIDs shall be unique within the NVM subsystem. If the Namespace
Management, ANA Reporting, and NVM Sets are not supported, then NSIDs:
a) for shared namespace shall be unique; and
b) for private namespace are not required to be unique."
Reference: Section 6.1.6 NSID and Namespace Usage; NVM Express 1.4c spec.
Make sure this specific setup is supported in Linux.
Fixes: 9ad1927a3b ("nvme: always search for namespace head")
Signed-off-by: Sungup Moon <sungup.moon@samsung.com>
[hch: refactored and fixed the controller vs subsystem based naming
conflict]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
-----BEGIN PGP SIGNATURE-----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=993h
-----END PGP SIGNATURE-----
Merge tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- NVMe updates via Christoph:
- add vectored-io support for user-passthrough (Kanchan Joshi)
- add verbose error logging (Alan Adamson)
- support buffered I/O on block devices in nvmet (Chaitanya
Kulkarni)
- central discovery controller support (Martin Belanger)
- fix and extended the globally unique idenfier validation
(Christoph)
- move away from the deprecated IDA APIs (Sagi Grimberg)
- misc code cleanup (Keith Busch, Max Gurtovoy, Qinghua Jin,
Chaitanya Kulkarni)
- add lockdep annotations for in-kernel sockets (Chris Leech)
- use vmalloc for ANA log buffer (Hannes Reinecke)
- kerneldoc fixes (Chaitanya Kulkarni)
- cleanups (Guoqing Jiang, Chaitanya Kulkarni, Christoph)
- warn about shared namespaces without multipathing (Christoph)
- MD updates via Song with a set of cleanups (Christoph, Mariusz, Paul,
Erik, Dirk)
- loop cleanups and queue depth configuration (Chaitanya)
- null_blk cleanups and fixes (Chaitanya)
- Use descriptive init/exit names in virtio_blk (Randy)
- Use bvec_kmap_local() in drivers (Christoph)
- bcache fixes (Mingzhe)
- xen blk-front persistent grant speedups (Juergen)
- rnbd fix and cleanup (Gioh)
- Misc fixes (Christophe, Colin)
* tag 'for-5.18/drivers-2022-03-18' of git://git.kernel.dk/linux-block: (76 commits)
virtio_blk: eliminate anonymous module_init & module_exit
nvme: warn about shared namespaces without CONFIG_NVME_MULTIPATH
nvme: remove nvme_alloc_request and nvme_alloc_request_qid
nvme: cleanup how disk->disk_name is assigned
nvmet: move the call to nvmet_ns_changed out of nvmet_ns_revalidate
nvmet: use snprintf() with PAGE_SIZE in configfs
nvmet: don't fold lines
nvmet-rdma: fix kernel-doc warning for nvmet_rdma_device_removal
nvmet-fc: fix kernel-doc warning for nvmet_fc_unregister_targetport
nvmet-fc: fix kernel-doc warning for nvmet_fc_register_targetport
nvme-tcp: lockdep: annotate in-kernel sockets
nvme-tcp: don't fold the line
nvme-tcp: don't initialize ret variable
nvme-multipath: call bio_io_error in nvme_ns_head_submit_bio
nvme-multipath: use vmalloc for ANA log buffer
xen/blkfront: speed up purge_persistent_grants()
raid5: initialize the stripe_head embeeded bios as needed
raid5-cache: statically allocate the recovery ra bio
raid5-cache: fully initialize flush_bio when needed
raid5-ppl: fully initialize the bio in ppl_new_iounit
...
They way how assigning the disk name and commenting on why it is done
is split over core.c and multipath.c seems to be rather confusing.
Now that ns_head->disk always exists we can do all the work in core.c
and have a single big comment explaining the issues.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Use bio_io_error() here since bio_io_error does the same thing.
Signed-off-by: Guoqing Jiang <guoqing.jiang@linux.dev>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The ANA log buffer can get really large, as it depends on the
controller configuration. So to avoid an out-of-memory issue
during scanning use kvmalloc() instead of the kmalloc().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb8 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb8 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <markus.bloechl@ipetronik.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Link: https://lore.kernel.org/r/20220217075231.1140-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=k0IZ
-----END PGP SIGNATURE-----
Merge tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- mtip32xx pci cleanups (Bjorn)
- mtip32xx conversion to generic power management (Vaibhav)
- rsxx pci powermanagement cleanups (Bjorn)
- Remove the rsxx driver. This hardware never saw much adoption, and
it's been end of lifed for a while. (Christoph)
- MD pull request from Song:
- REQ_NOWAIT support (Vishal Verma)
- raid6 benchmark optimization (Dirk Müller)
- Fix for acct bioset (Xiao Ni)
- Clean up max_queued_requests (Mariusz Tkaczyk)
- PREEMPT_RT optimization (Davidlohr Bueso)
- Use default_groups in kobj_type (Greg Kroah-Hartman)
- Use attribute groups in pktcdvd and rnbd (Greg)
- NVMe pull request from Christoph:
- increment request genctr on completion (Keith Busch, Geliang
Tang)
- add a 'iopolicy' module parameter (Hannes Reinecke)
- print out valid arguments when reading from /dev/nvme-fabrics
(Hannes Reinecke)
- Use struct_group() in drbd (Kees)
- null_blk fixes (Ming)
- Get rid of congestion logic in pktcdvd (Neil)
- Floppy ejection hang fix (Tasos)
- Floppy max user request size fix (Xiongwei)
- Loop locking fix (Tetsuo)
* tag 'for-5.17/drivers-2022-01-11' of git://git.kernel.dk/linux-block: (32 commits)
md: use default_groups in kobj_type
md: Move alloc/free acct bioset in to personality
lib/raid6: Use strict priority ranking for pq gen() benchmarking
lib/raid6: skip benchmark of non-chosen xor_syndrome functions
md: fix spelling of "its"
md: raid456 add nowait support
md: raid10 add nowait support
md: raid1 add nowait support
md: add support for REQ_NOWAIT
md: drop queue limitation for RAID1 and RAID10
md/raid5: play nice with PREEMPT_RT
block/rnbd-clt-sysfs: use default_groups in kobj_type
pktcdvd: convert to use attribute groups
block: null_blk: only set set->nr_maps as 3 if active poll_queues is > 0
nvme: add 'iopolicy' module parameter
nvme: drop unused variable ctrl in nvme_setup_cmd
nvme: increment request genctr on completion
nvme-fabrics: print out valid arguments when reading from /dev/nvme-fabrics
block: remove the rsxx driver
rsxx: Drop PCI legacy power management
...
While the 'iopolicy' sysfs attribute can be set at runtime, most
storage arrays prefer to use the 'round-robin' iopolicy per default.
We can use udev rules to set this, but is getting rather unwieldy
for rebranded arrays as we would have to update the udev rules
anytime a new array shows up, leading to the same mess we currently
have in multipathd for configuring the RDAC arrays.
Hence this patch adds a module parameter 'iopolicy' to allow the
admin to switch the default, and to do away with the need for a
udev rule here.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Set ana_log_size to 0 when ana_log_buf is freed to make sure
nvme_mpath_init_identify will do the right thing when retrying
after an earlier failure.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In an effort to avoid open-coded arithmetic in the kernel [1], use the
flex_array_size() and struct_size() helpers instead of an open-coded
calculation.
[1] https://github.com/KSPP/linux/issues/160
Signed-off-by: Len Baker <len.baker@gmx.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When reading the partition table on initial scan hits an I/O error the
I/O will hang with the scan_mutex held:
[<0>] do_read_cache_page+0x49b/0x790
[<0>] read_part_sector+0x39/0xe0
[<0>] read_lba+0xf9/0x1d0
[<0>] efi_partition+0xf1/0x7f0
[<0>] bdev_disk_changed+0x1ee/0x550
[<0>] blkdev_get_whole+0x81/0x90
[<0>] blkdev_get_by_dev+0x128/0x2e0
[<0>] device_add_disk+0x377/0x3c0
[<0>] nvme_mpath_set_live+0x130/0x1b0 [nvme_core]
[<0>] nvme_mpath_add_disk+0x150/0x160 [nvme_core]
[<0>] nvme_alloc_ns+0x417/0x950 [nvme_core]
[<0>] nvme_validate_or_alloc_ns+0xe9/0x1e0 [nvme_core]
[<0>] nvme_scan_work+0x168/0x310 [nvme_core]
[<0>] process_one_work+0x231/0x420
and trying to delete the controller will deadlock as it tries to grab
the scan mutex:
[<0>] nvme_mpath_clear_ctrl_paths+0x25/0x80 [nvme_core]
[<0>] nvme_remove_namespaces+0x31/0xf0 [nvme_core]
[<0>] nvme_do_delete_ctrl+0x4b/0x80 [nvme_core]
As we're now properly ordering the namespace list there is no need to
hold the scan_mutex in nvme_mpath_clear_ctrl_paths() anymore.
And we always need to kick the requeue list as the path will be marked
as unusable and I/O will be requeued _without_ a current path.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We never checked for errors on add_disk() as this function
returned void. Now that this is fixed, use the shiny new
error handling.
Since we now can tell for sure when a disk was added, move
setting the bit NVME_NSHEAD_DISK_LIVE only when we did
add the disk successfully.
Nothing to do here as the cleanup is done elsewhere. We take
care and use test_and_set_bit() because it is protects against
two nvme paths simultaneously calling device_add_disk() on the
same namespace head.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When fast_io_fail_tmo is set I/O will be aborted while recovery is
still ongoing. This causes MD to set the namespace to failed, and
no futher I/O will be submitted to that namespace.
However, once the recovery succeeds and the namespace becomes
operational again the NVMe subsystem doesn't send a notification,
so MD cannot automatically reinstate operation and requires
manual interaction.
This patch will send a KOBJ_CHANGE uevent per multipathed namespace
once the underlying controller transitions to LIVE, allowing an automatic
MD reassembly with these udev rules:
/etc/udev/rules.d/65-md-auto-re-add.rules:
SUBSYSTEM!="block", GOTO="md_end"
ACTION!="change", GOTO="md_end"
ENV{ID_FS_TYPE}!="linux_raid_member", GOTO="md_end"
PROGRAM="/sbin/md_raid_auto_readd.sh $devnode"
LABEL="md_end"
/sbin/md_raid_auto_readd.sh:
MDADM=/sbin/mdadm
DEVNAME=$1
export $(${MDADM} --examine --export ${DEVNAME})
if [ -z "${MD_UUID}" ]; then
exit 1
fi
UUID_LINK=$(readlink /dev/disk/by-id/md-uuid-${MD_UUID})
MD_DEVNAME=${UUID_LINK##*/}
export $(${MDADM} --detail --export /dev/${MD_DEVNAME})
if [ -z "${MD_METADATA}" ] ; then
exit 1
fi
if [ $(cat /sys/block/${MD_DEVNAME}/md/degraded) != 1 ]; then
echo "${MD_DEVNAME}: array not degraded, nothing to do"
exit 0
fi
MD_STATE=$(cat /sys/block/${MD_DEVNAME}/md/array_state)
if [ ${MD_STATE} != "clean" ] ; then
echo "${MD_DEVNAME}: array state ${MD_STATE}, cannot re-add"
exit 1
fi
MD_VARNAME="MD_DEVICE_dev_${DEVNAME##*/}_ROLE"
if [ ${!MD_VARNAME} = "spare" ] ; then
${MDADM} --manage /dev/${MD_DEVNAME} --re-add ${DEVNAME}
fi
Changes to v2:
- Add udev rules example to description
Changes to v1:
- use disk_uevent() as suggested by hch
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Set the poll queue flag to enable polling, given that the multipath
node just dispatches the bios to a lower queue.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the blk_poll interface that requires the caller to keep a queue
and cookie from the submissions with polling based on the bio.
Polling for the bio itself leads to a few advantages:
- the cookie construction can made entirely private in blk-mq.c
- the caller does not need to remember the request_queue and cookie
separately and thus sidesteps their lifetime issues
- keeping the device and the cookie inside the bio allows to trivially
support polling BIOs remapping by stacking drivers
- a lot of code to propagate the cookie back up the submission path can
be removed entirely.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Mark Wunderlich <mark.wunderlich@intel.com>
Link: https://lore.kernel.org/r/20211012111226.760968-15-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Decrease reference count of chardevice during char device deletion in
order to fix a memory leak. Add a release callabck for the device
associated chardev and move ida_simple_remove into the release function.
Fixes: 2637baed78 ("nvme: introduce generic per-namespace chardev")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Suggested-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Adam Manzanares <a.manzanares@samsung.com>
Reviewed-by: Javier González <javier@javigon.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_update_ana_state() has a deficiency that results in a failure to
properly update the ana state for a namespace in the following case:
NSIDs in ctrl->namespaces: 1, 3, 4
NSIDs in desc->nsids: 1, 2, 3, 4
Loop iteration 0:
ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH.
Loop iteration 1:
ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH.
Loop iteration 2:
ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH.
Where the update to the ANA state of NSID 3 is missed. To fix this
increment n and retry the update with the same ns when ns->head->ns_id is
higher than nsid,
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
When triggering a rescan due to a namespace resize we will be
receiving AENs on every controller, triggering a rescan of all
attached namespaces. If multipath is active only the current path and
the ns_head disk will be updated, the other paths will still refer to
the old size until AENs for the remaining controllers are received.
If I/O comes in before that it might be routed to one of the old
paths, triggering an I/O failure with 'access beyond end of device'.
With this patch the old paths are skipped from multipath path
selection until the controller serving these paths has been rescanned.
Signed-off-by: Hannes Reinecke <hare@suse.de>
[dwagner: - introduce NVME_NS_READY flag instead of NVME_NS_INVALIDATE
- use 'revalidate' instead of 'invalidate' which
follows the zoned device code path.
- clear NVME_NS_READY before clearing current_path]
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme multipathing code just dispatches bios to one of the blk-mq
based paths and never blocks on its own, so set QUEUE_FLAG_NOWAIT
to support REQ_NOWAIT bios.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Use the nvme-internal NVME_NSHEAD_DISK_LIVE flag instead of abusing
the block layer state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210809064028.1198327-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When the last path to a ns_head drops the current code
removes the ns_head from the subsystem list, but will only
delete the disk itself if the last reference to the ns_head
drops. This is causing an refcounting imbalance eg when
applications have a reference to the disk, as then they'll
never get notified that the disk is in fact dead.
This patch moves the call 'del_gendisk' into nvme_mpath_check_last_path(),
ensuring that the disk can be properly removed and applications get the
appropriate notifications.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=D6dS
-----END PGP SIGNATURE-----
Merge tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
Commit ce86dad222 ("nvme-multipath: reset bdev to ns head when
failover") moved the reset code where the bio is added to the
requeue_list for the failover path. But it left the original
bio_set_dev in nvme_requeue_work.
There is a second path to nvme_requee_work. It is via
nvme_ns_head_submit_bio. Though we don't have to set bio->bi_bdev for
this path either, as it points to the correct bdev already.
Let's remove the bio_set_dev. It's updating the bio->bi_bdev with the
same pointer and thus it's unnecessary.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The controller is required to have a non-zero MNAN value if it supports
ANA:
If the controller supports Asymmetric Namespace Access Reporting, then
this field shall be set to a non-zero value that is less than or equal
to the NN value.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Split multipath support out of nvme_report_zones into a separate helper
and simplify the non-multipath version as a result.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Convert the nvme-multipath driver to use the blk_alloc_disk and
blk_cleanup_disk helpers to simplify gendisk and request_queue
allocation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210521055116.1053587-19-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Automatically set the GENHD_FL_EXT_DEVT flag for all disks allocated
without an explicit number of minors. This is what all new block
drivers should do, so make sure it is the default without boilerplate
code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Luis Chamberlain <mcgrof@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210521055116.1053587-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields. Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Reported-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
When a request finally completes in end_io() after it has failed over,
the bdev pointer can be stale and thus the system can crash. Set the
bdev back to ns head, so the request is map to an active path when
resubmitted.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Userspace has not been allowed to I/O to device that's failed to
be initialized. This patch introduces generic per-namespace character
device to allow userspace to I/O regardless the block device is there or
not.
The chardev naming convention will similar to the existing blkdev naming,
using a ng prefix instead of nvme, i.e.
- /dev/ngXnY
It also supports multipath which means it will not expose chardev for the
hidden namespace blkdevs (e.g., nvmeXcYnZ). If /dev/ngXnY is created for
a ns_head, then I/O request will be routed to a specific controller
selected by the iopolicy of the subsystem.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Move the multipath block_device_operations to multipath.c, where they
belong.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Return false from nvme_set_disk_name and let the caller set the
non-multipath name instead of duplicating the naming information in two
places. Also remove the pointless local variables for the disk name
and flags and the not needed ctrl argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Javier González <javier.gonz@samsung.com>
There is a single trailing whitespace in multipath.c.
Since this is just a single whitespace, the chances of this affecting
backports to stable should be quite low, so let's just remove it.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
If ANA is enabled but no ANA group descriptor is found when creating
a new namespace the ANA log is most likely out of date, so trigger
a re-read. The namespace will be tagged with the NS_ANA_PENDING flag
to exclude it from path selection until the ANA log has been re-read.
Fixes: 32acab3181 ("nvme: implement multipath access to nvme subsystems")
Reported-by: Martin George <marting@netapp.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
sysfs_emit is the recommended API to use for formatting strings to be
returned to user space. It is equivalent to scnprintf and aware of the
PAGE_SIZE buffer size.
Suggested-by: Chaitanya Kulkarni <Chaitanya.Kulkarni@wdc.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----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=vx6U
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
- Remove the skd driver. It's been EOL for a long time (Damien)
- NVMe pull requests
- fix multipath handling of ->queue_rq errors (Chao Leng)
- nvmet cleanups (Chaitanya Kulkarni)
- add a quirk for buggy Amazon controller (Filippo Sironi)
- avoid devm allocations in nvme-hwmon that don't interact well
with fabrics (Hannes Reinecke)
- sysfs cleanups (Jiapeng Chong)
- fix nr_zones for multipath (Keith Busch)
- nvme-tcp crash fix for no-data commands (Sagi Grimberg)
- nvmet-tcp fixes (Sagi Grimberg)
- add a missing __rcu annotation (Christoph)
- failed reconnect fixes (Chao Leng)
- various tracing improvements (Michal Krakowiak, Johannes
Thumshirn)
- switch the nvmet-fc assoc_list to use RCU protection (Leonid
Ravich)
- resync the status codes with the latest spec (Max Gurtovoy)
- minor nvme-tcp improvements (Sagi Grimberg)
- various cleanups (Rikard Falkeborn, Minwoo Im, Chaitanya
Kulkarni, Israel Rukshin)
- Floppy O_NDELAY fix (Denis)
- MD pull request
- raid5 chunk_sectors fix (Guoqing)
- Use lore links (Kees)
- Use DEFINE_SHOW_ATTRIBUTE for nbd (Liao)
- loop lock scaling (Pavel)
- mtip32xx PCI fixes (Bjorn)
- bcache fixes (Kai, Dongdong)
- Misc fixes (Tian, Yang, Guoqing, Joe, Andy)
* tag 'for-5.12/drivers-2021-02-17' of git://git.kernel.dk/linux-block: (64 commits)
lightnvm: pblk: Replace guid_copy() with export_guid()/import_guid()
lightnvm: fix unnecessary NULL check warnings
nvme-tcp: fix crash triggered with a dataless request submission
block: Replace lkml.org links with lore
nbd: Convert to DEFINE_SHOW_ATTRIBUTE
nvme: add 48-bit DMA address quirk for Amazon NVMe controllers
nvme-hwmon: rework to avoid devm allocation
nvmet: remove else at the end of the function
nvmet: add nvmet_req_subsys() helper
nvmet: use min of device_path and disk len
nvmet: use invalid cmd opcode helper
nvmet: use invalid cmd opcode helper
nvmet: add helper to report invalid opcode
nvmet: remove extra variable in id-ns handler
nvmet: make nvmet_find_namespace() req based
nvmet: return uniform error for invalid ns
nvmet: set status to 0 in case for invalid nsid
nvmet-fc: add a missing __rcu annotation to nvmet_fc_tgt_assoc.queues
nvme-multipath: set nr_zones for zoned namespaces
nvmet-tcp: fix potential race of tcp socket closing accept_work
...
-----BEGIN PGP SIGNATURE-----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=os1E
-----END PGP SIGNATURE-----
Merge tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block
Pull core block updates from Jens Axboe:
"Another nice round of removing more code than what is added, mostly
due to Christoph's relentless pursuit of tech debt removal/cleanups.
This pull request contains:
- Two series of BFQ improvements (Paolo, Jan, Jia)
- Block iov_iter improvements (Pavel)
- bsg error path fix (Pan)
- blk-mq scheduler improvements (Jan)
- -EBUSY discard fix (Jan)
- bvec allocation improvements (Ming, Christoph)
- bio allocation and init improvements (Christoph)
- Store bdev pointer in bio instead of gendisk + partno (Christoph)
- Block trace point cleanups (Christoph)
- hard read-only vs read-only split (Christoph)
- Block based swap cleanups (Christoph)
- Zoned write granularity support (Damien)
- Various fixes/tweaks (Chunguang, Guoqing, Lei, Lukas, Huhai)"
* tag 'for-5.12/block-2021-02-17' of git://git.kernel.dk/linux-block: (104 commits)
mm: simplify swapdev_block
sd_zbc: clear zone resources for non-zoned case
block: introduce blk_queue_clear_zone_settings()
zonefs: use zone write granularity as block size
block: introduce zone_write_granularity limit
block: use blk_queue_set_zoned in add_partition()
nullb: use blk_queue_set_zoned() to setup zoned devices
nvme: cleanup zone information initialization
block: document zone_append_max_bytes attribute
block: use bi_max_vecs to find the bvec pool
md/raid10: remove dead code in reshape_request
block: mark the bio as cloned in bio_iov_bvec_set
block: set BIO_NO_PAGE_REF in bio_iov_bvec_set
block: remove a layer of indentation in bio_iov_iter_get_pages
block: turn the nr_iovecs argument to bio_alloc* into an unsigned short
block: remove the 1 and 4 vec bvec_slabs entries
block: streamline bvec_alloc
block: factor out a bvec_alloc_gfp helper
block: move struct biovec_slab to bio.c
block: reuse BIO_INLINE_VECS for integrity bvecs
...
The bio based drivers only require the request_queue's nr_zones is set,
so set this field in the head if the namespace path is zoned.
Fixes: 240e6ee272 ("nvme: support for zoned namespaces")
Reported-by: Minwoo Im <minwoo.im.dev@gmail.com>
Cc: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_round_robin_path() should test if the return ns pointer is valid.
nvme_next_ns() will return a NULL pointer if there is no path left.
Fixes: 75c10e7327 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Always use the bio_set_dev helper to assign ->bi_bdev to make sure
other state related to the device is uptodate.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Replace the gendisk pointer in struct bio with a pointer to the newly
improved struct block device. From that the gendisk can be trivially
accessed with an extra indirection, but it also allows to directly
look up all information related to partition remapping.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=ayp2
-----END PGP SIGNATURE-----
Merge tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Nothing major in here:
- NVMe pull request from Christoph:
- nvmet passthrough improvements (Chaitanya Kulkarni)
- fcloop error injection support (James Smart)
- read-only support for zoned namespaces without Zone Append
(Javier González)
- improve some error message (Minwoo Im)
- reject I/O to offline fabrics namespaces (Victor Gladkov)
- PCI queue allocation cleanups (Niklas Schnelle)
- remove an unused allocation in nvmet (Amit Engel)
- a Kconfig spelling fix (Colin Ian King)
- nvme_req_qid simplication (Baolin Wang)
- MD pull request from Song:
- Fix race condition in md_ioctl() (Dae R. Jeong)
- Initialize read_slot properly for raid10 (Kevin Vigor)
- Code cleanup (Pankaj Gupta)
- md-cluster resync/reshape fix (Zhao Heming)
- Move null_blk into its own directory (Damien Le Moal)
- null_blk zone and discard improvements (Damien Le Moal)
- bcache race fix (Dongsheng Yang)
- Set of rnbd fixes/improvements (Gioh Kim, Guoqing Jiang, Jack Wang,
Lutz Pogrell, Md Haris Iqbal)
- lightnvm NULL pointer deref fix (tangzhenhao)
- sr in_interrupt() removal (Sebastian Andrzej Siewior)
- FC endpoint security support for s390/dasd (Jan Höppner, Sebastian
Ott, Vineeth Vijayan). From the s390 arch guys, arch bits included
as it made it easier for them to funnel the feature through the
block driver tree.
- Follow up fixes (Colin Ian King)"
* tag 'for-5.11/drivers-2020-12-14' of git://git.kernel.dk/linux-block: (64 commits)
block: drop dead assignments in loop_init()
sr: Remove in_interrupt() usage in sr_init_command().
sr: Switch the sector size back to 2048 if sr_read_sector() changed it.
cdrom: Reset sector_size back it is not 2048.
drivers/lightnvm: fix a null-ptr-deref bug in pblk-core.c
null_blk: Move driver into its own directory
null_blk: Allow controlling max_hw_sectors limit
null_blk: discard zones on reset
null_blk: cleanup discard handling
null_blk: Improve implicit zone close
null_blk: improve zone locking
block: Align max_hw_sectors to logical blocksize
null_blk: Fail zone append to conventional zones
null_blk: Fix zone size initialization
bcache: fix race between setting bdev state to none and new write request direct to backing
block/rnbd: fix a null pointer dereference on dev->blk_symlink_name
block/rnbd-clt: Dynamically alloc buffer for pathname & blk_symlink_name
block/rnbd: call kobject_put in the failure path
Documentation/ABI/rnbd-srv: add document for force_close
block/rnbd-srv: close a mapped device from server side.
...
The request_queue can trivially be derived from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commands get stuck while Host NVMe-oF controller is in reconnect state.
The controller enters into reconnect state when it loses connection with
the target. It tries to reconnect every 10 seconds (default) until
a successful reconnect or until the reconnect time-out is reached.
The default reconnect time out is 10 minutes.
Applications are expecting commands to complete with success or error
within a certain timeout (30 seconds by default). The NVMe host is
enforcing that timeout while it is connected, but during reconnect the
timeout is not enforced and commands may get stuck for a long period or
even forever.
To fix this long delay due to the default timeout, introduce new
"fast_io_fail_tmo" session parameter. The timeout is measured in seconds
from the controller reconnect and any command beyond that timeout is
rejected. The new parameter value may be passed during 'connect'.
The default value of -1 means no timeout (similar to current behavior).
Signed-off-by: Victor Gladkov <victor.gladkov@kioxia.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chao Leng <lengchao@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the
backing_dev_info shared between the block drivers and the writeback code.
To help untangling the dependency replace it with a queue flag and a
superblock flag derived from it. This also helps with the case of e.g.
a file system requiring stable writes due to its own checksumming, but
not forcing it on other users of the block device like the swap code.
One downside is that we an't support the stable_pages_required bdi
attribute in sysfs anymore. It is replaced with a queue attribute which
also is writable for easier testing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lift all the code to decide the dispostition of a completed command
from nvme_complete_rq and nvme_failover_req into a new helper, which
returns an emum of the potential actions. nvme_complete_rq then
just switches on those and calls the proper helper for the action.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If we find an optimized path, we quit the loop immediately. Thus we can use
just one variable for the next path, slighly simplifying the code.
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If there's only one usable, non-optimized path, nvme_round_robin_path()
returns NULL, which is wrong. Fix it by falling back to "old", like in
the single optimized path case. Also, if the active path isn't changed,
there's no need to re-assign the pointer.
Fixes: 3f6e3246db ("nvme-multipath: fix logic for non-optimized paths")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin George <marting@netapp.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When nvme_round_robin_path() finds a valid namespace we should be using it;
falling back to __nvme_find_path() for non-optimized paths will cause the
result from nvme_round_robin_path() to be ignored for non-optimized paths.
Fixes: 75c10e7327 ("nvme-multipath: round-robin I/O policy")
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Handle the special case where we have exactly one optimized path,
which we should keep using in this case.
Fixes: 75c10e7327 ("nvme-multipath: round-robin I/O policy")
Signed off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
A deadlock happens in the following scenario with multipath:
1) scan_work(nvme0) detects a new nsid while nvme0
is an optimized path to it, path nvme1 happens to be
inaccessible.
2) Before scan_work is complete nvme0 disconnect is initiated
nvme_delete_ctrl_sync() sets nvme0 state to NVME_CTRL_DELETING
3) scan_work(1) attempts to submit IO,
but nvme_path_is_optimized() observes nvme0 is not LIVE.
Since nvme1 is a possible path IO is requeued and scan_work hangs.
--
Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: efi_partition+0x1e6/0x708
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
--
4) Delete also hangs in flush_work(ctrl->scan_work)
from nvme_remove_namespaces().
Similiarly a deadlock with ana_work may happen: if ana_work has started
and calls nvme_mpath_set_live and device_add_disk, it will
trigger I/O. When we trigger disconnect I/O will block because
our accessible (optimized) path is disconnecting, but the alternate
path is inaccessible, so I/O blocks. Then disconnect tries to flush
the ana_work and hangs.
[ 605.550896] Workqueue: nvme-wq nvme_ana_work [nvme_core]
[ 605.552087] Call Trace:
[ 605.552683] __schedule+0x2b9/0x6c0
[ 605.553507] schedule+0x42/0xb0
[ 605.554201] io_schedule+0x16/0x40
[ 605.555012] do_read_cache_page+0x438/0x830
[ 605.556925] read_cache_page+0x12/0x20
[ 605.557757] read_dev_sector+0x27/0xc0
[ 605.558587] amiga_partition+0x4d/0x4c5
[ 605.561278] check_partition+0x154/0x244
[ 605.562138] rescan_partitions+0xae/0x280
[ 605.563076] __blkdev_get+0x40f/0x560
[ 605.563830] blkdev_get+0x3d/0x140
[ 605.564500] __device_add_disk+0x388/0x480
[ 605.565316] device_add_disk+0x13/0x20
[ 605.566070] nvme_mpath_set_live+0x5e/0x130 [nvme_core]
[ 605.567114] nvme_update_ns_ana_state+0x2c/0x30 [nvme_core]
[ 605.568197] nvme_update_ana_state+0xca/0xe0 [nvme_core]
[ 605.569360] nvme_parse_ana_log+0xa1/0x180 [nvme_core]
[ 605.571385] nvme_read_ana_log+0x76/0x100 [nvme_core]
[ 605.572376] nvme_ana_work+0x15/0x20 [nvme_core]
[ 605.573330] process_one_work+0x1db/0x380
[ 605.574144] worker_thread+0x4d/0x400
[ 605.574896] kthread+0x104/0x140
[ 605.577205] ret_from_fork+0x35/0x40
[ 605.577955] INFO: task nvme:14044 blocked for more than 120 seconds.
[ 605.579239] Tainted: G OE 5.3.5-050305-generic #201910071830
[ 605.580712] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 605.582320] nvme D 0 14044 14043 0x00000000
[ 605.583424] Call Trace:
[ 605.583935] __schedule+0x2b9/0x6c0
[ 605.584625] schedule+0x42/0xb0
[ 605.585290] schedule_timeout+0x203/0x2f0
[ 605.588493] wait_for_completion+0xb1/0x120
[ 605.590066] __flush_work+0x123/0x1d0
[ 605.591758] __cancel_work_timer+0x10e/0x190
[ 605.593542] cancel_work_sync+0x10/0x20
[ 605.594347] nvme_mpath_stop+0x2f/0x40 [nvme_core]
[ 605.595328] nvme_stop_ctrl+0x12/0x50 [nvme_core]
[ 605.596262] nvme_do_delete_ctrl+0x3f/0x90 [nvme_core]
[ 605.597333] nvme_sysfs_delete+0x5c/0x70 [nvme_core]
[ 605.598320] dev_attr_store+0x17/0x30
Fix this by introducing a new state: NVME_CTRL_DELETE_NOIO, which will
indicate the phase of controller deletion where I/O cannot be allowed
to access the namespace. NVME_CTRL_DELETING still allows mpath I/O to
be issued to the bottom device, and only after we flush the ana_work
and scan_work (after nvme_stop_ctrl and nvme_prep_remove_namespaces)
we change the state to NVME_CTRL_DELETING_NOIO. Also we prevent ana_work
from re-firing by aborting early if we are not LIVE, so we should be safe
here.
In addition, change the transport drivers to follow the updated state
machine.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The Commands Supported and Effects log page was extended with a CSI
field that enables the host to query the log page for each command set
supported. Retrieve this log page for each command set that an attached
namespace supports, and save a pointer to that log in the namespace head.
Reviewed-by: Matias Bjørling <matias.bjorling@wdc.com>
Reviewed-by: Javier González <javier.gonz@samsung.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <keith.busch@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAl8CYDYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGcQkH/2vOsPf79yWtsc7x
hd2LpCPfrm7T1xlQcYcXbEbyRI8sqPmguixO8pRI1ePl2lBZ7KurfyeYgYZNGpFU
t74Ph6A6dSWoCgO68Genm/SQuK8ic6o9n1Vr8tDsGDp5KlHWNaweq4JwHrsPmO1T
cI0PR/ClAhLG8cQZ4x988Es5HTNGY17XK27e+M/zKYxSMGY2NRdJBGQIq964i5Q8
2d9G0rtVCaVDzgjrLwaFm6RBu21Il7HV6KsBsacyTFiL1ywx2vnUHzeZQyvuJSOQ
4YpLo9v4tBP10WHC50LRStZyO0qRwPVd/Yl7fL4R/CKsJT9H4uiwasVoEBVSL/k6
CUn3JL0=
=P/Vx
-----END PGP SIGNATURE-----
Merge tag 'v5.8-rc4' into for-5.9/drivers
Merge in 5.8-rc4 for-5.9/block to setup for-5.9/drivers, to provide
a clean base and making the life for the NVMe changes easier.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* tag 'v5.8-rc4': (732 commits)
Linux 5.8-rc4
x86/ldt: use "pr_info_once()" instead of open-coding it badly
MIPS: Do not use smp_processor_id() in preemptible code
MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
.gitignore: Do not track `defconfig` from `make savedefconfig`
io_uring: fix regression with always ignoring signals in io_cqring_wait()
x86/ldt: Disable 16-bit segments on Xen PV
x86/entry/32: Fix #MC and #DB wiring on x86_32
x86/entry/xen: Route #DB correctly on Xen PV
x86/entry, selftests: Further improve user entry sanity checks
x86/entry/compat: Clear RAX high bits on Xen PV SYSENTER
i2c: mlxcpld: check correct size of maximum RECV_LEN packet
i2c: add Kconfig help text for slave mode
i2c: slave-eeprom: update documentation
i2c: eg20t: Load module automatically if ID matches
i2c: designware: platdrv: Set class based on DMI
i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
mm/page_alloc: fix documentation error
vmalloc: fix the owner argument for the new __vmalloc_node_range callers
mm/cma.c: use exact_nid true to fix possible per-numa cma leak
...
For private namespaces ns->head_disk is NULL, so add a NULL check
before updating the BDI capabilities.
Fixes: b2ce4d9069 ("nvme-multipath: set bdi capabilities once")
Reported-by: Avinash M N <Avinash.M.N@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Now that submit_bio_noacct has a decent blk-mq fast path there is no
more need for this bypass.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
generic_make_request has always been very confusingly misnamed, so rename
it to submit_bio_noacct to make it clear that it is submit_bio minus
accounting and a few checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The make_request_fn is a little weird in that it sits directly in
struct request_queue instead of an operation vector. Replace it with
a block_device_operations method called submit_bio (which describes much
better what it does). Also remove the request_queue argument to it, as
the queue can be derived pretty trivially from the bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queue can be trivially derived from the bio, so pass one less
argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The mpath disk node takes a reference on the request mpath
request queue when adding live path to the mpath gendisk.
However if we connected to an inaccessible path device_add_disk
is not called, so if we disconnect and remove the mpath gendisk
we endup putting an reference on the request queue that was
never taken [1].
Fix that to check if we ever added a live path (using
NVME_NS_HEAD_HAS_DISK flag) and if not, clear the disk->queue
reference.
[1]:
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 1 PID: 1372 at lib/refcount.c:28 refcount_warn_saturate+0xa6/0xf0
CPU: 1 PID: 1372 Comm: nvme Tainted: G O 5.7.0-rc2+ #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-1ubuntu1 04/01/2014
RIP: 0010:refcount_warn_saturate+0xa6/0xf0
RSP: 0018:ffffb29e8053bdc0 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff8b7a2f4fc060 RCX: 0000000000000007
RDX: 0000000000000007 RSI: 0000000000000092 RDI: ffff8b7a3ec99980
RBP: ffff8b7a2f4fc000 R08: 00000000000002e1 R09: 0000000000000004
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: fffffffffffffff2 R14: ffffb29e8053bf08 R15: ffff8b7a320e2da0
FS: 00007f135d4ca800(0000) GS:ffff8b7a3ec80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005651178c0c30 CR3: 000000003b650005 CR4: 0000000000360ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
disk_release+0xa2/0xc0
device_release+0x28/0x80
kobject_put+0xa5/0x1b0
nvme_put_ns_head+0x26/0x70 [nvme_core]
nvme_put_ns+0x30/0x60 [nvme_core]
nvme_remove_namespaces+0x9b/0xe0 [nvme_core]
nvme_do_delete_ctrl+0x43/0x5c [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write+0xc1/0x1a0
vfs_write+0xb6/0x1a0
ksys_write+0x5f/0xe0
do_syscall_64+0x52/0x1a0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported-by: Anton Eidelman <anton@lightbitslabs.com>
Tested-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In the following scenario scan_work and ana_work will deadlock:
When scan_work calls nvme_mpath_add_disk() this holds ana_lock
and invokes nvme_parse_ana_log(), which may issue IO
in device_add_disk() and hang waiting for an accessible path.
While nvme_mpath_set_live() only called when nvme_state_is_live(),
a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO.
Since nvme_mpath_set_live() holds ns->head->lock, an ana_work on
ANY ctrl will not be able to complete nvme_mpath_set_live()
on the same ns->head, which is required in order to update
the new accessible path and remove NVME_NS_ANA_PENDING..
Therefore IO never completes: deadlock [1].
Fix:
Move device_add_disk out of the head->lock and protect it with an
atomic test_and_set for a new NVME_NS_HEAD_HAS_DISK bit.
[1]:
kernel: INFO: task kworker/u8:2:160 blocked for more than 120 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u8:2 D 0 160 2 0x80004000
kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: schedule_preempt_disabled+0xe/0x10
kernel: __mutex_lock.isra.0+0x182/0x4f0
kernel: __mutex_lock_slowpath+0x13/0x20
kernel: mutex_lock+0x2e/0x40
kernel: nvme_update_ns_ana_state+0x22/0x60 [nvme_core]
kernel: nvme_update_ana_state+0xca/0xe0 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: nvme_read_ana_log+0x76/0x100 [nvme_core]
kernel: nvme_ana_work+0x15/0x20 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x4d/0x400
kernel: kthread+0x104/0x140
kernel: ret_from_fork+0x35/0x40
kernel: INFO: task kworker/u8:4:439 blocked for more than 120 seconds.
kernel: Tainted: G OE 5.3.5-050305-generic #201910071830
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
kernel: kworker/u8:4 D 0 439 2 0x80004000
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: efi_partition+0x1e6/0x708
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_mpath_add_disk+0xbe/0x100 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: nvme_scan_work+0x256/0x390 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x4d/0x400
kernel: kthread+0x104/0x140
kernel: ret_from_fork+0x35/0x40
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Right now ns->head->lock is protecting namespace mutation
which is wrong and unneeded. Move it to only protect
against head mutations. While we're at it, remove unnecessary
ns->head reference as we already have head pointer.
The problem with this is that the head->lock spans
mpath disk node I/O that may block under some conditions (if
for example the controller is disconnecting or the path
became inaccessible), The locking scheme does not allow any
other path to enable itself, preventing blocked I/O to complete
and forward-progress from there.
This is a preparation patch for the fix in a subsequent patch
where the disk I/O will also be done outside the head->lock.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When scan_work calls nvme_mpath_add_disk() this holds ana_lock
and invokes nvme_parse_ana_log(), which may issue IO
in device_add_disk() and hang waiting for an accessible path.
While nvme_mpath_set_live() only called when nvme_state_is_live(),
a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO.
In order to recover and complete the IO ana_work on the same ctrl
should be able to update the path state and remove NVME_NS_ANA_PENDING.
The deadlock occurs because scan_work keeps holding ana_lock,
so ana_work hangs [1].
Fix:
Now nvme_mpath_add_disk() uses nvme_parse_ana_log() to obtain a copy
of the ANA group desc, and then calls nvme_update_ns_ana_state() without
holding ana_lock.
[1]:
kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: io_schedule+0x16/0x40
kernel: do_read_cache_page+0x438/0x830
kernel: read_cache_page+0x12/0x20
kernel: read_dev_sector+0x27/0xc0
kernel: read_lba+0xc1/0x220
kernel: efi_partition+0x1e6/0x708
kernel: check_partition+0x154/0x244
kernel: rescan_partitions+0xae/0x280
kernel: __blkdev_get+0x40f/0x560
kernel: blkdev_get+0x3d/0x140
kernel: __device_add_disk+0x388/0x480
kernel: device_add_disk+0x13/0x20
kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core]
kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core]
kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core]
kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core]
kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core]
kernel: nvme_validate_ns+0x396/0x940 [nvme_core]
kernel: nvme_scan_work+0x24f/0x380 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x249/0x400
kernel: kthread+0x104/0x140
kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core]
kernel: Call Trace:
kernel: __schedule+0x2b9/0x6c0
kernel: schedule+0x42/0xb0
kernel: schedule_preempt_disabled+0xe/0x10
kernel: __mutex_lock.isra.0+0x182/0x4f0
kernel: ? __switch_to_asm+0x34/0x70
kernel: ? select_task_rq_fair+0x1aa/0x5c0
kernel: ? kvm_sched_clock_read+0x11/0x20
kernel: ? sched_clock+0x9/0x10
kernel: __mutex_lock_slowpath+0x13/0x20
kernel: mutex_lock+0x2e/0x40
kernel: nvme_read_ana_log+0x3a/0x100 [nvme_core]
kernel: nvme_ana_work+0x15/0x20 [nvme_core]
kernel: process_one_work+0x1db/0x380
kernel: worker_thread+0x4d/0x400
kernel: kthread+0x104/0x140
kernel: ? process_one_work+0x380/0x380
kernel: ? kthread_park+0x80/0x80
kernel: ret_from_fork+0x35/0x40
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Improve code readability by defining the specification's constants that
the driver is using when decoding identification payloads.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
nvme-multipath already uses the gendisk private data, not need to
also set up the request_queue queuedata and use it in one place only.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The queues' backing device info capabilities don't change with each
namespace revalidation. Set it only when each path's request_queue
is initially added to a multipath queue.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The deadlock combines 4 flows in parallel:
- ns scanning (triggered from reconnect)
- request timeout
- ANA update (triggered from reconnect)
- I/O coming into the mpath device
(1) ns scanning triggers disk revalidation -> update disk info ->
freeze queue -> but blocked, due to (2)
(2) timeout handler reference the g_usage_counter - > but blocks in
the transport .timeout() handler, due to (3)
(3) the transport timeout handler (indirectly) calls nvme_stop_queue() ->
which takes the (down_read) namespaces_rwsem - > but blocks, due to (4)
(4) ANA update takes the (down_write) namespaces_rwsem -> calls
nvme_mpath_set_live() -> which synchronize the ns_head srcu
(see commit 504db087aa) -> but blocks, due to (5)
(5) I/O came into nvme_mpath_make_request -> took srcu_read_lock ->
direct_make_request > blk_queue_enter -> but blocked, due to (1)
==> the request queue is under freeze -> deadlock.
The fix is making ANA update take a read lock as the namespaces list
is not manipulated, it is just the ns and ns->head that are being
updated (which is protected with the ns->head lock).
Fixes: 0d0b660f21 ("nvme: add ANA support")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper. Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter. A lower-level __blk_alloc_queue is kept for the blk-mq case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The nvme multipath error handling defaults to controller reset if the
error is unknown. There are, however, no existing nvme status codes that
indicate a reset should be used, and resetting causes unnecessary
disruption to the rest of IO.
Change nvme's error handling to first check if failover should happen.
If not, let the normal error handling take over rather than reset the
controller.
Based-on-a-patch-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: John Meneghini <johnm@netapp.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
kmemleak reports a memory leak with the ana_log_buf allocated by
nvme_mpath_init():
unreferenced object 0xffff888120e94000 (size 8208):
comm "nvme", pid 6884, jiffies 4295020435 (age 78786.312s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................
01 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000e2360188>] kmalloc_order+0x97/0xc0
[<0000000079b18dd4>] kmalloc_order_trace+0x24/0x100
[<00000000f50c0406>] __kmalloc+0x24c/0x2d0
[<00000000f31a10b9>] nvme_mpath_init+0x23c/0x2b0
[<000000005802589e>] nvme_init_identify+0x75f/0x1600
[<0000000058ef911b>] nvme_loop_configure_admin_queue+0x26d/0x280
[<00000000673774b9>] nvme_loop_create_ctrl+0x2a7/0x710
[<00000000f1c7a233>] nvmf_dev_write+0xc66/0x10b9
[<000000004199f8d0>] __vfs_write+0x50/0xa0
[<0000000065466fef>] vfs_write+0xf3/0x280
[<00000000b0db9a8b>] ksys_write+0xc6/0x160
[<0000000082156b91>] __x64_sys_write+0x43/0x50
[<00000000c34fbb6d>] do_syscall_64+0x77/0x2f0
[<00000000bbc574c9>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
nvme_mpath_init() is called by nvme_init_identify() which is called in
multiple places (nvme_reset_work(), nvme_passthru_end(), etc). This
means nvme_mpath_init() may be called multiple times before
nvme_mpath_uninit() (which is only called on nvme_free_ctrl()).
When nvme_mpath_init() is called multiple times, it overwrites the
ana_log_buf pointer with a new allocation, thus leaking the previous
allocation.
To fix this, free ana_log_buf before allocating a new one.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Cc: <stable@vger.kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3WyEAQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgplgbD/4jNeqT0q2IkNcUUEWkZWsBOlfi0SiclS5v
X8JY1IxTlL0kaBWm83mw06JewucQ97Fh7xblPE8/iDHJqpgEX4vvSQY1b8hcDulZ
YOKUnLkFU22nICeT04/8x/+f8gqD5KOlGxkgEvUKViQW15oc0oNu4St/yFM1QEN0
qNMzpcfFXV9lYsOPl0y3pKdP+qbfcpeSmaFD9Z65gxN6rJy1WR8rtUGXy2luoiEc
dh15IL9AGN/r8VTo8yRpD9PStiuJqpALIR8OHJSHPj+s0pQ6twk4aehcnYseAMbH
zSDpa9AJrfqlnh8tUfKYLWi/PM7pMH0F01rAiQv47j/C0+QhbiOU/uTFTzUW5hQ1
eK6XzJ0slxwnDsHLKf+xJmCj0Oyk0jDimNQr/2MNsuhmr29V5lfvBNflub8eOLyZ
ie2Eulv+z6pYBSJx6kqm0X3vhXOy4wgU+X8LzvfcP9iAjgU1rfzxUWxLEj+KfJS2
Nl+ERV9nafoPpoKpNR7zWRBUulp1qZJzo/U9JaUKiI5cWkIH1hhHmU2++xMeyJpb
XHoDFNTGv6z/eef65eSveFD7F274TSi16K56Obk+4KWaSrIR0d6VwUA7FDmJbSI+
Jqk1OFdaRGsQ5OcVxF1Qo4WChn0FvhcD0c+yL0N19WZ01QeYsb3hlA+MUPDtGQ04
U79MPfu7iA==
=i0jf
-----END PGP SIGNATURE-----
Merge tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block
Pull block driver updates from Jens Axboe:
"Here are the main block driver updates for 5.5. Nothing major in here,
mostly just fixes. This contains:
- a set of bcache changes via Coly
- MD changes from Song
- loop unmap write-zeroes fix (Darrick)
- spelling fixes (Geert)
- zoned additions cleanups to null_blk/dm (Ajay)
- allow null_blk online submit queue changes (Bart)
- NVMe changes via Keith, nothing major here either"
* tag 'for-5.5/drivers-20191121' of git://git.kernel.dk/linux-block: (56 commits)
Revert "bcache: fix fifo index swapping condition in journal_pin_cmp()"
drivers/md/raid5-ppl.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
drivers/md/raid5.c: use the new spelling of RWH_WRITE_LIFE_NOT_SET
bcache: don't export symbols
bcache: remove the extra cflags for request.o
bcache: at least try to shrink 1 node in bch_mca_scan()
bcache: add idle_max_writeback_rate sysfs interface
bcache: add code comments in bch_btree_leaf_dirty()
bcache: fix deadlock in bcache_allocator
bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front()
bcache: deleted code comments for dead code in bch_data_insert_keys()
bcache: add more accurate error messages in read_super()
bcache: fix static checker warning in bcache_device_free()
bcache: fix a lost wake-up problem caused by mca_cannibalize_lock
bcache: fix fifo index swapping condition in journal_pin_cmp()
md/raid10: prevent access of uninitialized resync_pages offset
md: avoid invalid memory access for array sb->dev_roles
md/raid1: avoid soft lockup under high load
null_blk: add zone open, close, and finish support
dm: add zone open, close and finish support
...
nvme_mpath_clear_ctrl_paths() iterates through
the ctrl->namespaces list while holding ctrl->scan_lock.
This does not seem to be the correct way of protecting
from concurrent list modification.
Specifically, nvme_scan_work() sorts ctrl->namespaces
AFTER unlocking scan_lock.
This may result in the following (rare) crash in ctrl disconnect
during scan_work:
BUG: kernel NULL pointer dereference, address: 0000000000000050
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 3995 Comm: nvme 5.3.5-050305-generic
RIP: 0010:nvme_mpath_clear_current_path+0xe/0x90 [nvme_core]
...
Call Trace:
nvme_mpath_clear_ctrl_paths+0x3c/0x70 [nvme_core]
nvme_remove_namespaces+0x35/0xe0 [nvme_core]
nvme_do_delete_ctrl+0x47/0x90 [nvme_core]
nvme_sysfs_delete+0x49/0x60 [nvme_core]
dev_attr_store+0x17/0x30
sysfs_kf_write+0x3e/0x50
kernfs_fop_write+0x11e/0x1a0
__vfs_write+0x1b/0x40
vfs_write+0xb9/0x1a0
ksys_write+0x67/0xe0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x5a/0x130
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f8d02bfb154
Fix:
After taking scan_lock in nvme_mpath_clear_ctrl_paths()
down_read(&ctrl->namespaces_rwsem) as well to make list traversal safe.
This will not cause deadlocks because taking scan_lock never happens
while holding the namespaces_rwsem.
Moreover, scan work downs namespaces_rwsem in the same order.
Alternative: sort ctrl->namespaces in nvme_scan_work()
while still holding the scan_lock.
This would leave nvme_mpath_clear_ctrl_paths() without correct protection
against ctrl->namespaces modification by anyone other than scan_work.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Check validity of offset into ANA log buffer before accessing
nvme_ana_group_desc. This check ensures the size of ANA log buffer >=
offset + sizeof(nvme_ana_group_desc)
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
