Add a helper function to print new/current TSPLL config. This helps
avoid unnecessary casts from u8 to enums.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Instead of multiple comments, use designated initializers for TSPLL
consts.
Adjust ice_tspll_params_e82x fields sizes.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove ice_tspll_params_e825 definitions as according to EDS (Electrical
Design Specification) doc, E825 devices support only 156.25 MHz TSPLL
frequency for both TCXO and TIME_REF clock source.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E825-C hardware has a slightly different register layout for register
19 of the Clock Generation Unit and TSPLL. The fbdiv_intgr value can be 10
bits wide.
Additionally, most of the fields that were in register 24 are made
available in register 23 instead. The programming logic already has a
corrected definition for register 23, but it incorrectly still used the
8-bit definition of fbdiv_intgr. This results in truncating some of the
values of fbdiv_intgr, including the value used for the 156.25MHz signal.
The driver only used register 24 to obtain the enable status, which we
should read from register 23. This results in an incorrect output for the
log messages, but does not change any functionality besides
disabled-by-default dynamic debug messages.
Fix the register definitions, and adjust the code to properly reflect the
enable/disable status in the log messages.
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Rename TSPLL and CGU functions, definitions etc. to match the file name
and have consistent naming scheme.
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Collect TSPLL related functions and definitions and move them to
a separate file to have all TSPLL functionality in one place.
Move CGU related functions and definitions to ice_common.*
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
libeth: add libeth_xdp helper lib
Alexander Lobakin says:
Time to add XDP helpers infra to libeth to greatly simplify adding
XDP to idpf and iavf, as well as improve and extend XDP in ice and
i40e. Any vendor is free to reuse helpers. If this happens, I'm fine
with moving the folder of out intel/.
The helpers greatly simplify building xdp_buff, running a prog,
handling the verdict, implement XDP_TX, .ndo_xdp_xmit, XDP buffer
completion. Same applies to XSk (with XSk xmit instead of
.ndo_xdp_xmit, plus stuff like XSk wakeup).
They are entirely generic with no HW definitions or assumptions.
HW-specific stuff like parsing Rx desc / filling Tx desc is passed
from the driver as inline callbacks.
For now, key assumptions that optimize performance / avoid code
bloat, but might not fit every driver in driver/net/:
* netmem holding the buffers are always order-0;
* driver has separate XDP Tx queues, doesn't use stack queues for
that. For best efficiency, you may want to have nr_cpu_ids XDP
queues, but less (queue sharing) is also supported;
* XDP Tx queues are interrupt-less and use "lazy" cleaning only
when there are less than 1/4 free Tx descriptors of the queue
size;
* main target platforms are 64-bit, although 32-bit is also fully
supported, but the code might be not as optimized for them.
Library code already supports multi-buffer for all kinds of Tx and
both header split and no split for Rx and Tx. Frags can come from
devmem/io_uring etc., direct `struct page *` is used only for header
buffers for which it's always true.
Drivers are free to pass their own Rx hints and XSK xmit hints ops.
XDP_TX and ndo_xdp_xmit use onstack bulk for the frames to be sent
and send them by batches of 16 buffers. This eats ~280 bytes on the
stack, but gives good boosts and allow to greatly optimize the main
sending function leaving it without any error/exception paths.
XSk xmit fills Tx descriptors in the loop unrolled by 8. This was
proven to improve perf on ice and i40e. XDP_TX and ndo_xdp_xmit
doesn't use unrolling as I wasn't able to get any improvements in
those scenenarios from this, while +1 Kb for their sending functions
for nothing doesn't sound reasonable.
XSk wakeup, instead of traditionally used "SW interrupts" provided
by NICs, uses IPI to schedule NAPI on the CPU corresponding to the
given queue pair. It gives better control over CPU distribution and
in general performs way better than "SW interrupts", plus allows us
to not pass any HW-specific callbacks there.
The code is built the way that all callbacks passed from drivers
get inlined; in general, most of hotpath gets inlined. Everything
slow/exception lands to .c files in the libeth folder, doesn't
create copies in the drivers themselves and doesn't overloat
hotpath.
Sure, inlining means that hotpath will be compiled into every driver
that uses the lib, but the core code is written in one place, so no
copying of bugs happens. Fixed once -- works everywhere.
The last commit might look like sorta hack, but it gives really good
boosts and decreases object code size, plus there are checks that
all those wider accesses are fully safe, so I don't feel anything
bad about it.
An example of using libeth_xdp can be found either on my GitHub or
on the mailing lists here ("XDP for idpf"). Macros for building
driver XDP functions lead to that some implementations (XDP_TX,
ndo_xdp_xmit etc.) consist of really only a few lines.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
libeth: xdp, xsk: access adjacent u32s as u64 where applicable
libeth: xsk: add XSkFQ refill and XSk wakeup helpers
libeth: xsk: add XSk Rx processing support
libeth: xsk: add XSk xmit functions
libeth: xsk: add XSk XDP_TX sending helpers
libeth: xdp: add RSS hash hint and XDP features setup helpers
libeth: xdp: add templates for building driver-side callbacks
libeth: xdp: add XDP prog run and verdict result handling
libeth: xdp: add helpers for preparing/processing &libeth_xdp_buff
libeth: xdp: add XDPSQ cleanup timers
libeth: xdp: add XDPSQ locking helpers
libeth: xdp: add XDPSQE completion helpers
libeth: xdp: add .ndo_xdp_xmit() helpers
libeth: xdp: add XDP_TX buffers sending
libeth: support native XDP and register memory model
libeth: convert to netmem
libeth, libie: clean symbol exports up a little
====================
Link: https://patch.msgid.link/20250616201639.710420-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On some systems with Nahum 11 and Nahum 13 the value of the XTAL clock in
the software STRAP is incorrect. This causes the PTP timer to run at the
wrong rate and can lead to synchronization issues.
The STRAP value is configured by the system firmware, and a firmware
update is not always possible. Since the XTAL clock on these systems
always runs at 38.4MHz, the driver may ignore the STRAP and just set
the correct value.
Fixes: cc23f4f0b6 ("e1000e: Add support for Meteor Lake")
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Reviewed-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch fixes an issue seen in a large-scale deployment under heavy
incoming pkts where the aRFS flow wrongly matches a flow and reprograms the
NIC with wrong settings. That mis-steering causes RX-path latency spikes
and noisy neighbor effects when many connections collide on the same
hash (some of our production servers have 20-30K connections).
set_rps_cpu() calls ndo_rx_flow_steer() with flow_id that is calculated by
hashing the skb sized by the per rx-queue table size. This results in
multiple connections (even across different rx-queues) getting the same
hash value. The driver steer function modifies the wrong flow to use this
rx-queue, e.g.: Flow#1 is first added:
Flow#1: <ip1, port1, ip2, port2>, Hash 'h', q#10
Later when a new flow needs to be added:
Flow#2: <ip3, port3, ip4, port4>, Hash 'h', q#20
The driver finds the hash 'h' from Flow#1 and updates it to use q#20. This
results in both flows getting un-optimized - packets for Flow#1 goes to
q#20, and then reprogrammed back to q#10 later and so on; and Flow #2
programming is never done as Flow#1 is matched first for all misses. Many
flows may wrongly share the same hash and reprogram rules of the original
flow each with their own q#.
Tested on two 144-core servers with 16K netperf sessions for 180s. Netperf
clients are pinned to cores 0-71 sequentially (so that wrong packets on q#s
72-143 can be measured). IRQs are set 1:1 for queues -> CPUs, enable XPS,
enable aRFS (global value is 144 * rps_flow_cnt).
Test notes about results from ice_rx_flow_steer():
---------------------------------------------------
1. "Skip:" counter increments here:
if (fltr_info->q_index == rxq_idx ||
arfs_entry->fltr_state != ICE_ARFS_ACTIVE)
goto out;
2. "Add:" counter increments here:
ret = arfs_entry->fltr_info.fltr_id;
INIT_HLIST_NODE(&arfs_entry->list_entry);
3. "Update:" counter increments here:
/* update the queue to forward to on an already existing flow */
Runtime comparison: original code vs with the patch for different
rps_flow_cnt values.
+-------------------------------+--------------+--------------+
| rps_flow_cnt | 512 | 2048 |
+-------------------------------+--------------+--------------+
| Ratio of Pkts on Good:Bad q's | 214 vs 822K | 1.1M vs 980K |
| Avoid wrong aRFS programming | 0 vs 310K | 0 vs 30K |
| CPU User | 216 vs 183 | 216 vs 206 |
| CPU System | 1441 vs 1171 | 1447 vs 1320 |
| CPU Softirq | 1245 vs 920 | 1238 vs 961 |
| CPU Total | 29 vs 22.7 | 29 vs 24.9 |
| aRFS Update | 533K vs 59 | 521K vs 32 |
| aRFS Skip | 82M vs 77M | 7.2M vs 4.5M |
+-------------------------------+--------------+--------------+
A separate TCP_STREAM and TCP_RR with 1,4,8,16,64,128,256,512 connections
showed no performance degradation.
Some points on the patch/aRFS behavior:
1. Enabling full tuple matching ensures flows are always correctly matched,
even with smaller hash sizes.
2. 5-6% drop in CPU utilization as the packets arrive at the correct CPUs
and fewer calls to driver for programming on misses.
3. Larger hash tables reduces mis-steering due to more unique flow hashes,
but still has clashes. However, with larger per-device rps_flow_cnt, old
flows take more time to expire and new aRFS flows cannot be added if h/w
limits are reached (rps_may_expire_flow() succeeds when 10*rps_flow_cnt
pkts have been processed by this cpu that are not part of the flow).
Fixes: 28bf26724f ("ice: Implement aRFS")
Signed-off-by: Krishna Kumar <krikku@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
I'm deleting all the boilerplate kdoc from the affected functions.
It is somewhere between pointless and incorrect, just a burden for
people refactoring the code.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
I'm deleting all the boilerplate kdoc from the affected functions.
It is somewhere between pointless and incorrect, just a burden for
people refactoring the code.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
I'm deleting all the boilerplate kdoc from the affected functions.
It is somewhere between pointless and incorrect, just a burden for
people refactoring the code.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
.get callback moves out of the switch and set_rxnfc disappears
as ETHTOOL_SRXFH as the only functionality.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250614180907.4167714-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed and it's the only
get_rxnfc sub-command the driver supports. So convert the get_rxnfc
handler into a get_rxfh_fields handler.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250614180638.4166766-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
XSkFQ refill is pretty generic across the drivers minus FQ descriptor
filling and can easily be unified with one inline callback.
XSk wakeup is usually not, but here, instead of commonly used
"SW interrupts", I picked firing an IPI. In most tests, it showed better
performance; it also provides better control for userspace on which CPU
will handle the xmit, as SW interrupts honor IRQ affinity no matter
which core produces XSk xmit descs (while XDPSQs are associated 1:1
with cores having the same ID).
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add XSk counterparts for preparing XSk &libeth_xdp_buff (adding head and
frags), running the program, and handling the verdict, inc. XDP_PASS.
Shortcuts in comparison with regular Rx: frags and all verdicts except
XDP_REDIRECT are under unlikely() and out of line; no checks for XDP
program presence as it's always true for XSk.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # optimizations
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reuse core sending functions to send XSk xmit frames.
Both metadata and no metadata pools/driver are supported. libeth_xdp
also provides generic XSk metadata ops, currently with the checksum
offload only and for cases when HW doesn't require supplying L3/L4
checksum offsets. Drivers are free to pass their own ops.
&libeth_xdp_tx_bulk is not used here as it would be redundant;
pool->tx_descs are accessed directly.
Fake "libeth_xsktmo" is needed to hide implementation details from the
drivers when they want to use the generic ops: the original struct is
defined in the same file where dev->xsk_tx_metadata_ops gets set to
avoid duplication of slowpath; at the same time; XSk xmit functions
use local "fast" copy to inline XMO callbacks.
Tx descriptor filling loop is unrolled by 8.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # optimizations
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add Xsk counterparts for XDP_TX buffer sending and completion.
The same base structures and functions used from the libeth_xdp core,
with adjustments to that XSk Rx always operates on &xdp_buff_xsk for
both head and frags. And unlike regular Rx, here unlikely() are used
for frags, as the header split gives no benefits for XSk Rx, at
least for now.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
End the XDP section by adding helpers to setup XDP features, flipping
.ndo_xdp_xmit() support at runtime (in case when it's not always on),
and calculating the queue clean/refill threshold.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Running a prog and handling the verdicts, up to napi_gro_receive()
is also pretty generic code not really differing between vendors
(except for Tx descriptor filling and Rx descriptor parsing).
Define a couple inlines to do that. The inline callbacks a driver
needs to pass is mentioned above: Tx descriptor filling for XDP_TX,
populating skb with the descriptor data for XDP_PASS, finalizing
XDPSQs after the polling loop for XDP_TX (kicking the HW to start
sending).
The populate callback passes only &libeth_xdp_buff assuming buff::desc
pointer is enough, plus you can always get the corresponding Rx queue
structure via container_of(buff::rxq). If not, a driver can extend
the buff with more fields directly on the stack without touching
libeth_xdp definitions.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add convenience helpers to build an &xdp_buff. This means: general
initialization before the NAPI loop, adding head, adding frags etc.
libeth_xdp_process_buff() is the same what everybody have in their
drivers:
dma_sync_for_cpu();
if (!frag) {
add_head();
prefetch();
} else {
add_frag();
}
Note that I don't use net_prefetch(), sticking to the original
prefetch(). In none of my tests prefetching 128 bytes yielded better
perf than 64 bytes. That might differ if the headers are huge enough,
but then additional tunneling etc. overhead takes place, you either
way won't win a lot.
&libeth_xdp_stash is for cases when you exit the polling loop without
finishing building the buff. If that happens, you need to store the
buffer in the queue structure until the next loop and then restore it.
It makes no sense to place a whole full &xdp_buff there. Define a
minimal structure, which would store only the fields essential to
restore it.
I was able to pack it into 16 bytes, which is only 8 bytes bigger
than `struct sk_buff *skb` on x64.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When XDP Tx queues are not interrupt-driven but use lazy cleaning,
i.e. only when there are less than `threshold` free descriptors left,
we also need cleanup timers to avoid &xdp_buff and &xdp_frame stall
for too long, especially with Page Pool (it warns every about inflight
pages every 60 second).
Let's say we sent 256 frames and don't need to send more, but we clean
only when the number of pending items >= 384. In that case, those 256
will stall until 128 more are sent. For this, add simple helpers to
run a timer which will clean the queue regardless, after 1 second of
the last send.
The timer is triggered when finalizing the queue. As long as there is
regular active traffic, the timer doesn't fire.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Unfortunately, it's not always possible to allocate
max(num_rxqs, nr_cpu_ids) even on hi-end NICs.
To mitigate this, add simple locking helpers to libeth_xdp.
As long as XDPSQs are not shared, the whole functionality is gated
behind a static lock. Otherwise, each bulk flush locks the queue for
the time of cleaning and filling the descriptors.
As long as this particular queue is not used by more than 1 CPU,
the impact is minimal (runtime check for boolean twice per 16+
descriptors).
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # static key
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Similarly to libeth_tx_complete(), add libeth_xdp_complete_tx() to
handle XDP_TX and xmit buffers. Both use bulk return under the hood.
Also add out of line libeth_tx_complete_any() which handles both
regular and XDP frames (if libeth_xdp is loaded), for example,
to call on queue destroy, where we don't need inlining but
convenience.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add helpers for implementing .ndo_xdp_xmit().
Same as for XDP_TX, accumulate up to 16 DMA-mapped frames on the stack,
then flush. If DMA mapping is failed for some reason, don't try mapping
further frames, but still flush what was already prepared.
DMA address of a head frame is stored in its headroom, assuming it
has enough of it for an 8 (or 4) byte value.
In addition to @prep and @xmit driver callbacks in XDP_TX, xmit also
needs @finalize to kick the XDPSQ after filling.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Start adding XDP-specific code to libeth, namely handling XDP_TX buffers
(only sending).
The idea is that we accumulate up to 16 buffers on the stack, then,
if either the limit is reached or the polling is finished, flush them
at once with only one XDPSQ cleaning (if needed). The main sending
function will be aware of the sending budget and already have all the
info to send the buffers, so it can't fail.
Drivers need to provide 2 inline callbacks to the main sending function:
for cleaning an XDPSQ and for filling descriptors; the library code
takes care of the rest.
Note that unlike the generic code, multi-buffer support is not wrapped
here with unlikely() to not hurt header split setups.
&libeth_xdp_buff is a simple extension over &xdp_buff which has a direct
pointer to the corresponding Rx descriptor (and, luckily, precisely 1 CL
size and 16-byte alignment on x86_64).
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # xmit logic
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Expand libeth's Page Pool functionality by adding native XDP support.
This means picking the appropriate headroom and DMA direction.
Also, register all the created &page_pools as XDP memory models.
A driver then can call xdp_rxq_info_attach_page_pool() when registering
its RxQ info.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Back when the libeth Rx core was initially written, devmem was a draft
and netmem_ref didn't exist in the mainline. Now that it's here, make
libeth MP-agnostic before introducing any new code or any new library
users.
When it's known that the created PP/FQ is for header buffers, use faster
"unsafe" underscored netmem <--> virt accessors as netmem_is_net_iov()
is always false in that case, but consumes some cycles (bit test +
true branch).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change EXPORT_SYMBOL_NS_GPL(x, "LIBETH") to EXPORT_SYMBOL_GPL(x) +
DEFAULT_SYMBOL_NAMESPACE "LIBETH" to make the code more compact.
Also, explicitly include <linux/export.h> to satisfy new
requirements from scripts/misc-check.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement a new admin command and helper function to handle and obtain
CGU measurements for input pins.
Add new callback operations to control the dpll device-level feature
"phase offset monitor," allowing it to be enabled or disabled. If the
feature is enabled, provide users with measured phase offsets and
notifications.
Initialize PPS DPLL with new callback operations if the feature is
supported by the firmware.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Acked-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250612152835.1703397-4-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid
routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient
packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0mtm
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
igc already supports enabling MAC Merge for FPE. This patch adds
support for preemptible queues in mqprio.
Tested preemption with mqprio by:
1. Enable FPE:
ethtool --set-mm enp1s0 pmac-enabled on tx-enabled on verify-enabled on
2. Enable preemptible queue in mqprio:
mqprio num_tc 4 map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Changes:
1. Introduce tx_enabled flag to control preemptible queue. tx_enabled
is set via mmsv module based on multiple factors, including link
up/down status, to determine if FPE is active or inactive.
2. Add priority field to TXDCTL for express queue to improve data
fetch performance.
3. Block preemptible queue setup in taprio unless reverse-tsn-txq-prio
private flag is set. Encourages adoption of standard queue priority
scheme for new features.
4. Hardware-padded frames from preemptible queues result in incorrect
mCRC values, as padding bytes are excluded from the computation. Pad
frames to at least 60 bytes using skb_padto() before transmission to
ensure the hardware includes padding in the mCRC calculation.
Tested preemption with taprio by:
1. Enable FPE:
ethtool --set-mm enp1s0 pmac-enabled on tx-enabled on verify-enabled on
2. Enable private flag to reverse TX queue priority:
ethtool --set-priv-flags enp1s0 reverse-txq-prio on
3. Enable preemptible queue in taprio:
taprio num_tc 4 map 0 1 2 3 0 0 0 0 0 0 0 0 0 0 0 0 \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Co-developed-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Chwee-Lin Choong <chwee.lin.choong@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
By default, igc assigns TX hw queue 0 the highest priority and queue 3
the lowest. This is opposite of most NICs, where TX hw queue 3 has the
highest priority and queue 0 the lowest.
mqprio in igc already uses TX arbitration unconditionally to reverse TX
queue priority when mqprio is enabled. The TX arbitration logic does not
require a private flag, because mqprio was added recently and no known
users depend on the default queue ordering, which differs from the typical
convention.
taprio does not use TX arbitration, so it inherits the default igc TX
queue priority order. This causes tc command inconsistencies when
configuring frame preemption with taprio compared to mqprio in igc.
Other tc command inconsistencies and configuration issues already exist
when using taprio on igc compared to other network controllers. These
issues are described in a later section.
To harmonize TX queue priority behavior between taprio and mqprio, and
to fix these issues without breaking long-standing taprio use cases,
this patch adds a new private flag, called reverse-tsn-txq-prio, to
reverse the TX queue priority. It makes queue 3 the highest and queue 0
the lowest, reusing the TX arbitration logic already used by mqprio.
Users must set the private flag when enabling frame preemption with
taprio to follow the standard convention. Doing so promotes adoption of
the correct priority model for new features while preserving
compatibility with legacy configurations.
This new private flag addresses:
1. Non-standard socket -> tc -> TX hw queue mapping for taprio in igc
Without the private flag:
- taprio maps (socket -> tc -> TX hardware queue) differently on igc
compared to other network controllers
- On igc, mqprio maps tc differently from taprio, since mqprio already
uses TX arbitration
The following examples compare taprio configuration on igc and other
network controllers:
a) On other NICs (TX hw queue 3 is highest priority):
taprio num_tc 4 map 0 1 2 3 .... \
queues 1@0 1@1 1@2 1@3
Mapping translates to:
socket 0 -> tc 0 -> queue 0
socket 3 -> tc 3 -> queue 3
This is the normal mapping that respects the standard convention:
higher socket number -> higher tc -> higher priority TX hw queue
b) On igc (TX hw queue 0 is highest priority by default):
taprio num_tc 4 map 3 2 1 0 .... \
queues 1@0 1@1 1@2 1@3
Mapping translates to:
socket 0 -> tc 3 -> queue 3
socket 3 -> tc 0 -> queue 0
This igc tc mapping example is based on Intel's TSN validation test
case, where a higher socket priority maps to a higher priority queue.
It respects the mapping:
higher socket number -> higher priority TX hw queue
but breaks the expected ordering:
higher tc -> higher priority TX hw queue
as defined in [Ref1]. This custom mapping complicates common taprio
setup across NICs.
2. Non-standard frame preemption mapping for taprio in igc
Without the private flag:
- Compared to other network controllers, taprio on igc must flip the
expected fp sequence, since express traffic is expected to map to the
highest priority queue and preemptible traffic to lower ones
- On igc, frame preemption configuration for mqprio differs from taprio,
since mqprio already uses TX arbitration
The following examples compare taprio frame preemption configuration on
igc and other network controllers:
a) On other NICs (TX hw queue 3 is highest priority):
taprio num_tc 4 map ..... \
queues 1@0 1@1 1@2 1@3 \
fp P P P E
Mapping translates to:
tc0, tc1, tc2 -> preemptible -> queue 0, 1, 2
tc3 -> express -> queue 3
This is the normal mapping that respects the standard convention:
higher tc -> express traffic -> higher priority TX hw queue
lower tc -> preemptible traffic -> lower priority TX hw queue
b) On igc (TX hw queue 0 is highest priority by default):
taprio num_tc 4 map ...... \
queues 1@0 1@1 1@2 1@3 \
fp E P P P
Mapping translates to:
tc0 -> express -> queue 0
tc1, tc2, tc3 -> preemptible -> queue 1, 2, 3
This inversion respects the mapping of:
express traffic -> higher priority TX hw queue
but breaks the expected ordering:
higher tc -> express traffic
as defined in [Ref1] where higher tc indicates higher priority. In
this case, the lower tc0 is assigned to express traffic. This custom
mapping further complicates common preemption setup across NICs.
Tests were performed on taprio with the following combinations, where
two apps send traffic simultaneously on different queues:
Private Flag Traffic Sent By Traffic Sent By
----------------------------------------------------------------
enabled iperf3 (queue 3) iperf3 (queue 0)
disabled iperf3 (queue 0) iperf3 (queue 3)
enabled iperf3 (queue 3) real-time app (queue 0)
disabled iperf3 (queue 0) real-time app (queue 3)
enabled real-time app (queue 3) iperf3 (queue 0)
disabled real-time app (queue 0) iperf3 (queue 3)
enabled real-time app (queue 3) real-time app (queue 0)
disabled real-time app (queue 0) real-time app (queue 3)
Private flag is controlled with:
ethtool --set-priv-flags enp1s0 reverse-tsn-txq-prio <on|off>
[Ref1]
IEEE 802.1Q clause 8.6.8 Transmission selection:
"For a given Port and traffic class, frames are selected from the
corresponding queue for transmission if and only if:
...
b) For each queue corresponding to a numerically higher value of traffic
class supported by the Port, the operation of the transmission selection
algorithm supported by that queue determines that there is no frame
available for transmission."
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously, TX arbitration prioritized queues based on the TC they were
mapped to. A queue mapped to TC 3 had higher priority than one mapped to
TC 0.
To improve code reuse for upcoming patches and align with typical NIC
behavior, this patch updates the logic to prioritize higher queue numbers
when mqprio is used. As a result, queue 0 becomes the lowest priority and
queue 3 becomes the highest.
This patch also introduces igc_tsn_is_tc_to_queue_priority_ordered() to
preserve the original TC-based priority rule and reject configurations
where a higher TC maps to a lower queue offset.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Refactor TXDCTL macro handling to use FIELD_PREP and GENMASK macros.
This prepares the code for adding a new TXDCTL priority field in an
upcoming patch.
Verified that the macro values remain unchanged before and after
refactoring.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Rename macros to use the DCTL prefix for consistency with existing
macros that reference the same register. This prepares for an upcoming
patch that adds new fields to TXDCTL.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move and consolidate TXDCTL and RXDCTL macros in preparation for
upcoming TXDCTL changes. This improves organization and readability.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously, e1000_down called cancel_work_sync for the e1000 reset task
(via e1000_down_and_stop), which takes RTNL.
As reported by users and syzbot, a deadlock is possible in the following
scenario:
CPU 0:
- RTNL is held
- e1000_close
- e1000_down
- cancel_work_sync (cancel / wait for e1000_reset_task())
CPU 1:
- process_one_work
- e1000_reset_task
- take RTNL
To remedy this, avoid calling cancel_work_sync from e1000_down
(e1000_reset_task does nothing if the device is down anyway). Instead,
call cancel_work_sync for e1000_reset_task when the device is being
removed.
Fixes: e400c7444d ("e1000: Hold RTNL when e1000_down can be called")
Reported-by: syzbot+846bb38dc67fe62cc733@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/683837bf.a00a0220.52848.0003.GAE@google.com/
Reported-by: John <john.cs.hey@gmail.com>
Closes: https://lore.kernel.org/netdev/CAP=Rh=OEsn4y_2LvkO3UtDWurKcGPnZ_NPSXK=FbgygNXL37Sw@mail.gmail.com/
Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Set use_nsecs=true as timestamp is reported in ns. Lack of this result
in smaller timestamp error window which cause error during phc2sys
execution on E825 NICs:
phc2sys[1768.256]: ioctl PTP_SYS_OFFSET_PRECISE: Invalid argument
This problem was introduced in the cited commit which omitted setting
use_nsecs to true when converting the ice driver to use
convert_base_to_cs().
Testing hints (ethX is PF netdev):
phc2sys -s ethX -c CLOCK_REALTIME -O 37 -m
phc2sys[1769.256]: CLOCK_REALTIME phc offset -5 s0 freq -0 delay 0
Fixes: d4bea547eb ("ice/ptp: Remove convert_art_to_tsc()")
Signed-off-by: Anton Nadezhdin <anton.nadezhdin@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If a reset event is received from the PF early in the init cycle, the
state machine hangs for about 25 seconds.
Reproducer:
echo 1 > /sys/class/net/$PF0/device/sriov_numvfs
ip link set dev $PF0 vf 0 mac $NEW_MAC
The log shows:
[792.620416] ice 0000:5e:00.0: Enabling 1 VFs
[792.738812] iavf 0000:5e:01.0: enabling device (0000 -> 0002)
[792.744182] ice 0000:5e:00.0: Enabling 1 VFs with 17 vectors and 16 queues per VF
[792.839964] ice 0000:5e:00.0: Setting MAC 52:54:00:00:00:11 on VF 0. VF driver will be reinitialized
[813.389684] iavf 0000:5e:01.0: Failed to communicate with PF; waiting before retry
[818.635918] iavf 0000:5e:01.0: Hardware came out of reset. Attempting reinit.
[818.766273] iavf 0000:5e:01.0: Multiqueue Enabled: Queue pair count = 16
Fix it by scheduling the reset task and making the reset task capable of
resetting early in the init cycle.
Fixes: ef8693eb90 ("i40evf: refactor reset handling")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a VFLR interrupt is received during a VF reset initiated from a
different source, the VFLR may be not fully handled. This can
leave the VF in an undefined state.
To address this, set the I40E_VFLR_EVENT_PENDING bit again during VFLR
handling if the reset is not yet complete. This ensures the driver
will properly complete the VF reset in such scenarios.
Fixes: 52424f974b ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The function i40e_vc_reset_vf attempts, up to 20 times, to handle a
VF reset request, using the return value of i40e_reset_vf as an indicator
of whether the reset was successfully triggered. Currently, i40e_reset_vf
always returns true, which causes new reset requests to be ignored if a
different VF reset is already in progress.
This patch updates the return value of i40e_reset_vf to reflect when
another VF reset is in progress, allowing the caller to properly use
the retry mechanism.
Fixes: 52424f974b ("i40e: Fix VF hang when reset is triggered on another VF")
Signed-off-by: Robert Malz <robert.malz@canonical.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Corrected spelling errors such as "simular" -> "similar",
"excepted" -> "accepted", and "Determime" -> "Determine".
Fixed including incorrect word usage ("to MAC" -> "two MAC")
and improved awkward phrasing.
Aligned function header descriptions with their actual functionality
(e.g., "Writes a value" -> "Reads a value").
Corrected typo in error code from -ENIVAL to -EINVAL.
Improved overall clarity and consistency in comment across various
functions.
These changes improve maintainability and readability of the code
without affecting functionality.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit bd7c00605e ("net: move aRFS rmap management and CPU affinity
to core") allows the drivers to delegate the IRQ affinity to the NAPI
instance. However, the driver needs to use a persistent NAPI config
and explicitly set/unset the NAPI<->IRQ association.
Convert to the new IRQ affinity API.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The "ice" driver implementation uses the control VSI to handle
the flow director configuration for PFs and VFs.
Unfortunately, although a separate VSI type was created to handle flow
director queues, the Rx queue handler was shared between the flow
director and a standard NAPI Rx handler.
Such a design approach was not very flexible. First, it mixed hotpath
and slowpath code, blocking their further optimization. It also created
a huge overkill for the flow director command processing, which is
descriptor-based only, so there is no need to allocate Rx data buffers.
For the above reasons, implement a separate Rx handler for the control
VSI. Also, remove from the NAPI handler the code dedicated to
configuring the flow director rules on VFs.
Do not allocate Rx data buffers to the flow director queues because
their processing is descriptor-based only.
Finally, allow Rx data queues to be allocated only for VSIs that have
netdev assigned to them.
This handler splitting approach is the first step in converting the
driver to use the Page Pool (which can only be used for data queues).
Test hints:
1. Create a VF for any PF managed by the ice driver.
2. In a loop, add and delete flow director rules for the VF, e.g.:
for i in {1..128}; do
q=$(( i % 16 ))
ethtool -N ens802f0v0 flow-type tcp4 dst-port "$i" action "$q"
done
for i in {0..127}; do
ethtool -N ens802f0v0 delete "$i"
done
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Suggested-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This change aligns E810 PTP pin control to all other products.
Currently, SMA/U.FL port expanders are controlled together with SDP pins
connected to 1588 clock. To align this, separate this control by
exposing only SDP20..23 pins in PTP API on adapters with DPLL.
Clear error for all E810 on absent NVM pin section or other errors to
allow proper initialization on SMA E810 with NVM section.
Use ARRAY_SIZE for pin array instead of internal definition.
Reviewed-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
DPLL-enabled E810 NIC driver provides user with list of input and output
pins. Hardware internal design impacts user control over SMA and U.FL
pins. Currently end-user view on those dpll pins doesn't provide any layer
of abstraction. On the hardware level SMA and U.FL pins are tied together
due to existence of direction control logic for each pair:
- SMA1 (bi-directional) and U.FL1 (only output)
- SMA2 (bi-directional) and U.FL2 (only input)
The user activity on each pin of the pair may impact the state of the
other.
Previously all the pins were provided to the user as is, without the
control over SMA pins direction.
Introduce a software controlled layer of abstraction over external board
pins, instead of providing the user with access to raw pins connected to
the dpll:
- new software controlled SMA and U.FL pins,
- callback operations directing user requests to corresponding hardware
pins according to the runtime configuration,
- ability to control SMA pins direction.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce a link_down_events counter to the ixgbe driver, incremented
each time the link transitions from up to down.
This counter can help diagnose issues related to link stability,
such as port flapping or unexpected link drops.
The value is exposed via ethtool's get_link_ext_stats() interface.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce a link_down_events counter to the i40e driver, incremented
each time the link transitions from up to down.
This counter can help diagnose issues related to link stability,
such as port flapping or unexpected link drops.
The value is exposed via ethtool's get_link_ext_stats() interface.
Co-developed-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce a link_down_events counter to the ice driver, incremented
each time the link transitions from up to down.
This counter can help diagnose issues related to link stability,
such as port flapping or unexpected link drops.
The value is exposed via ethtool's get_link_ext_stats() interface.
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Martyna Szapar-Mudlaw <martyna.szapar-mudlaw@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The Intel i40e, iavf, and ice drivers all include a definition of the
packet classifier filter types used to program RSS hash enable bits. For
i40e, these bits are used for both the PF and VF to configure the PFQF_HENA
and VFQF_HENA registers.
For ice and iAVF, these bits are used to communicate the desired hash
enable filter over virtchnl via its struct virtchnl_rss_hashena. The
virtchnl.h header makes no mention of where the bit definitions reside.
Maintaining a separate copy of these bits across three drivers is
cumbersome. Move the definition to libie as a new pctype.h header file.
Each driver can include this, and drop its own definition.
The ice implementation also defined a ICE_AVF_FLOW_FIELD_INVALID, intending
to use this to indicate when there were no hash enable bits set. This is
confusing, since the enumeration is using bit positions. A value of 0
*should* indicate the first bit. Instead, rewrite the code that uses
ICE_AVF_FLOW_FIELD_INVALID to just check if the avf_hash is zero. From
context this should be clear that we're checking if none of the bits are
set.
The values are kept as bit positions instead of encoding the BIT_ULL
directly into their value. While most users will simply use BIT_ULL
immediately, i40e uses the macros both with BIT_ULL and test_bit/set_bit
calls.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i40e, ice, and iAVF all use 'hena' as a shorthand for the "hash enable"
configuration. This comes originally from the X710 datasheet 'xxQF_HENA'
registers. In the context of the registers the meaning is fairly clear.
However, on its own, hena is a weird name that can be more difficult to
understand. This is especially true in ice. The E810 hardware doesn't even
have registers with HENA in the name.
Replace the shorthand 'hena' with 'hashcfg'. This makes it clear the
variables deal with the Hash configuration, not just a single boolean
on/off for all hashing.
Do not update the register names. These come directly from the datasheet
for X710 and X722, and it is more important that the names can be searched.
Suggested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Get rid of the crit lock.
That frees us from the error prone logic of try_locks.
Thanks to netdev_lock() by Jakub it is now easy, and in most cases we were
protected by it already - replace crit lock by netdev lock when it was not
the case.
Lockdep reports that we should cancel the work under crit_lock [splat1],
and that was the scheme we have mostly followed since [1] by Slawomir.
But when that is done we still got into deadlocks [splat2]. So instead
we should look at the bigger problem, namely "weird locking/scheduling"
of the iavf. The first step to fix that is to remove the crit lock.
I will followup with a -next series that simplifies scheduling/tasks.
Cancel the work without netdev lock (weird unlock+lock scheme),
to fix the [splat2] (which would be totally ugly if we would kept
the crit lock).
Extend protected part of iavf_watchdog_task() to include scheduling
more work.
Note that the removed comment in iavf_reset_task() was misplaced,
it belonged to inside of the removed if condition, so it's gone now.
[splat1] - w/o this patch - The deadlock during VF removal:
WARNING: possible circular locking dependency detected
sh/3825 is trying to acquire lock:
((work_completion)(&(&adapter->watchdog_task)->work)){+.+.}-{0:0}, at: start_flush_work+0x1a1/0x470
but task is already holding lock:
(&adapter->crit_lock){+.+.}-{4:4}, at: iavf_remove+0xd1/0x690 [iavf]
which lock already depends on the new lock.
[splat2] - when cancelling work under crit lock, w/o this series,
see [2] for the band aid attempt
WARNING: possible circular locking dependency detected
sh/3550 is trying to acquire lock:
((wq_completion)iavf){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x26/0x90
but task is already holding lock:
(&dev->lock){+.+.}-{4:4}, at: iavf_remove+0xa6/0x6e0 [iavf]
which lock already depends on the new lock.
[1] fc2e6b3b13 ("iavf: Rework mutexes for better synchronisation")
[2] https://github.com/pkitszel/linux/commit/52dddbfc2bb60294083f5711a158a
Fixes: d1639a1731 ("iavf: fix a deadlock caused by rtnl and driver's lock circular dependencies")
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Lockdep annotations help in general, but here it is extra good, as next
commit will remove crit lock.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Finish up easy refactor of watchdog_task, total for this + prev two
commits is:
1 file changed, 47 insertions(+), 82 deletions(-)
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Simplify the decision whether to schedule adminq task. The condition is
the same, but it is executed in more scenarios.
Note that movement of watchdog_done label makes this commit a bit
surprising. (Hence not squashing it to anything bigger).
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Centralize the unlock(critlock); unlock(netdev); queue_delayed_work(watchog_task);
pattern to one place.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix an obvious violation of lock ordering.
Jakub's [1] added netdev_lock() call that is wrong ordered wrt RTNL,
but the Fixes tag points to crit_lock being wrongly placed (by lockdep
standards).
Actual reason we got it wrong is dated back to critical section managed by
pure flag checks, which is with us since the very beginning.
[1] afc664987a ("eth: iavf: extend the netdev_lock usage")
Fixes: 5ac49f3c27 ("iavf: use mutexes for locking of critical sections")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mailbox operations are not possible while the driver is in reset.
Operations that require MBX exchange with the control plane will result
in long delays if executed while a reset is in progress:
ethtool -L <inf> combined 8& echo 1 > /sys/class/net/<inf>/device/reset
idpf 0000:83:00.0: HW reset detected
idpf 0000:83:00.0: Device HW Reset initiated
idpf 0000:83:00.0: Transaction timed-out (op:504 cookie:be00 vc_op:504 salt:be timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:508 cookie:bf00 vc_op:508 salt:bf timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:512 cookie:c000 vc_op:512 salt:c0 timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:510 cookie:c100 vc_op:510 salt:c1 timeout:2000ms)
idpf 0000:83:00.0: Transaction timed-out (op:509 cookie:c200 vc_op:509 salt:c2 timeout:60000ms)
idpf 0000:83:00.0: Transaction timed-out (op:509 cookie:c300 vc_op:509 salt:c3 timeout:60000ms)
idpf 0000:83:00.0: Transaction timed-out (op:505 cookie:c400 vc_op:505 salt:c4 timeout:60000ms)
idpf 0000:83:00.0: Failed to configure queues for vport 0, -62
Disable mailbox communication in case of a reset, unless it's done during
a driver load, where the virtchnl operations are needed to configure the
device.
Fixes: 8077c72756 ("idpf: add controlq init and reset checks")
Co-developed-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a helper function to correctly handle the lockless
synchronization when the sender needs to block. The paradigm is
if (no_resources()) {
stop_queue();
barrier();
if (!no_resources())
restart_queue();
}
netif_subqueue_maybe_stop already handles the paradigm correctly, but
the code split the check for resources in three parts, the first one
(descriptors) followed the protocol, but the other two (completions and
tx_buf) were only doing the first part and so race prone.
Luckily netif_subqueue_maybe_stop macro already allows you to use a
function to evaluate the start/stop conditions so the fix only requires
the right helper function to evaluate all the conditions at once.
The patch removes idpf_tx_maybe_stop_common since it's no longer needed
and instead adjusts separately the conditions for singleq and splitq.
Note that idpf_tx_buf_hw_update doesn't need to check for resources
since that will be covered in idpf_tx_splitq_frame.
To reproduce:
Reduce the threshold for pending completions to increase the chances of
hitting this pause by changing your kernel:
drivers/net/ethernet/intel/idpf/idpf_txrx.h
-#define IDPF_TX_COMPLQ_OVERFLOW_THRESH(txcq) ((txcq)->desc_count >> 1)
+#define IDPF_TX_COMPLQ_OVERFLOW_THRESH(txcq) ((txcq)->desc_count >> 4)
Use pktgen to force the host to push small pkts very aggressively:
./pktgen_sample02_multiqueue.sh -i eth1 -s 100 -6 -d $IP -m $MAC \
-p 10000-10000 -t 16 -n 0 -v -x -c 64
Fixes: 6818c4d5b3 ("idpf: add splitq start_xmit")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Josh Hay <joshua.a.hay@intel.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Luigi Rizzo <lrizzo@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The current implementation of the Tx scheduler allows the tree to be
rebuilt as the user adds more Tx queues to the VSI. In such a case,
additional child nodes are added to the tree to support the new number
of queues.
Unfortunately, this algorithm does not take into account that the limit
of the VSI support node may be exceeded, so an additional node in the
VSI layer may be required to handle all the requested queues.
Such a scenario occurs when adding XDP Tx queues on machines with many
CPUs. Although the driver still respects the queue limit returned by
the FW, the Tx scheduler was unable to add those queues to its tree
and returned one of the errors below.
Such a scenario occurs when adding XDP Tx queues on machines with many
CPUs (e.g. at least 321 CPUs, if there is already 128 Tx/Rx queue pairs).
Although the driver still respects the queue limit returned by the FW,
the Tx scheduler was unable to add those queues to its tree and returned
the following errors:
Failed VSI LAN queue config for XDP, error: -5
or:
Failed to set LAN Tx queue context, error: -22
Fix this problem by extending the tree rebuild algorithm to check if the
current VSI node can support the requested number of queues. If it
cannot, create as many additional VSI support nodes as necessary to
handle all the required Tx queues. Symmetrically, adjust the VSI node
removal algorithm to remove all nodes associated with the given VSI.
Also, make the search for the next free VSI node more restrictive. That is,
add queue group nodes only to the VSI support nodes that have a matching
VSI handle.
Finally, fix the comment describing the tree update algorithm to better
reflect the current scenario.
Fixes: b0153fdd7e ("ice: update VSI config dynamically")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The current implementation of the Tx scheduler tree attempts
to create nodes for all Tx queues, ignoring the fact that some
queues may already exist in the tree. For example, if the VSI
already has 128 Tx queues and the user requests for 16 new queues,
the Tx scheduler will compute the tree for 272 queues (128 existing
queues + 144 new queues), instead of 144 queues (128 existing queues
and 16 new queues).
Fix that by modifying the node count calculation algorithm to skip
the queues that already exist in the tree.
Fixes: 5513b920a4 ("ice: Update Tx scheduler tree for VSI multi-Tx queue support")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the XDP program is loaded, the XDP callback adds new Tx queues.
This means that the callback must update the Tx scheduler with the new
queue number. In the event of a Tx scheduler failure, the XDP callback
should also fail and roll back any changes previously made for XDP
preparation.
The previous implementation had a bug that not all changes made by the
XDP callback were rolled back. This caused the crash with the following
call trace:
[ +9.549584] ice 0000:ca:00.0: Failed VSI LAN queue config for XDP, error: -5
[ +0.382335] Oops: general protection fault, probably for non-canonical address 0x50a2250a90495525: 0000 [#1] SMP NOPTI
[ +0.010710] CPU: 103 UID: 0 PID: 0 Comm: swapper/103 Not tainted 6.14.0-net-next-mar-31+ #14 PREEMPT(voluntary)
[ +0.010175] Hardware name: Intel Corporation M50CYP2SBSTD/M50CYP2SBSTD, BIOS SE5C620.86B.01.01.0005.2202160810 02/16/2022
[ +0.010946] RIP: 0010:__ice_update_sample+0x39/0xe0 [ice]
[...]
[ +0.002715] Call Trace:
[ +0.002452] <IRQ>
[ +0.002021] ? __die_body.cold+0x19/0x29
[ +0.003922] ? die_addr+0x3c/0x60
[ +0.003319] ? exc_general_protection+0x17c/0x400
[ +0.004707] ? asm_exc_general_protection+0x26/0x30
[ +0.004879] ? __ice_update_sample+0x39/0xe0 [ice]
[ +0.004835] ice_napi_poll+0x665/0x680 [ice]
[ +0.004320] __napi_poll+0x28/0x190
[ +0.003500] net_rx_action+0x198/0x360
[ +0.003752] ? update_rq_clock+0x39/0x220
[ +0.004013] handle_softirqs+0xf1/0x340
[ +0.003840] ? sched_clock_cpu+0xf/0x1f0
[ +0.003925] __irq_exit_rcu+0xc2/0xe0
[ +0.003665] common_interrupt+0x85/0xa0
[ +0.003839] </IRQ>
[ +0.002098] <TASK>
[ +0.002106] asm_common_interrupt+0x26/0x40
[ +0.004184] RIP: 0010:cpuidle_enter_state+0xd3/0x690
Fix this by performing the missing unmapping of XDP queues from
q_vectors and setting the XDP rings pointer back to NULL after all those
queues are released.
Also, add an immediate exit from the XDP callback in case of ring
preparation failure.
Fixes: efc2214b60 ("ice: Add support for XDP")
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Jesse Brandeburg <jbrandeburg@cloudflare.com>
Tested-by: Saritha Sanigani <sarithax.sanigani@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmgwJa4ACgkQrB3Eaf9P
W7d34A//V3NukN6UNAUKd+MbH80eXCEbNSNIuVUstfr0S71qTCxovLX58u+oQztb
43mx/NsnF38TzNFWVyVzF4vcr/n0DS/Da3P5pJEjoewIYSDrz/WfOum6VpVIUsZ/
kLCDZlIoX/fBPFZDPHMmsDXDemAdrtr8CuK72NUH10vKDuGKSUG0NElqDieDBEsA
y/fqgBsyxQXi9cMdRxf+DLDK/hzqyaJmVj8B8WEcFtYXJ4RE6+jfLgAaTE6J7V5W
fYACTu/IcdtgEEm2U7wlow66oIjqqGReuWUzV9zHGJNCB9+da6L4dbGtzlRmOPdn
kI1PIALFWT2HbKnJOJJbaThO6zES1rMOm3PsWt7iVewCT8HuhAa9kDV0xzdcLQE1
+REfo8dXW9f5hRUrSuqpJFUArkCHWHLhQEcmTHaF0b2RveC/hd9rOyKIfae+fgIP
5uLU2DpwafDgw5UCjsQTLyQ5M6icO8wFgM7vKAUJWyI1Pck1ktf7Ic6+KQRNjWiv
Q7ImwpSdLH2bZpIbIKDnIcyZg3CMBIQ88cdsYi0+ckgDQ0hMf6ZrXRseXKRe0P/M
gKgBOoXIJBF7niJQTDqHjsmnYGvvhZysIJNQLf4BZFYOeF5L9OduP6ywqMe5pFKt
QAsJSZw/+SibheLEYQAzvyLD6VdMXaxeOAHlPylRRpl9vEX0l04=
=GRVJ
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Remove some unnecessary strscpy_pad() size arguments.
From Thorsten Blum.
2) Correct use of xso.real_dev on bonding offloads.
Patchset from Cosmin Ratiu.
3) Add hardware offload configuration to XFRM_MSG_MIGRATE.
From Chiachang Wang.
4) Refactor migration setup during cloning. This was
done after the clone was created. Now it is done
in the cloning function itself.
From Chiachang Wang.
5) Validate assignment of maximal possible SEQ number.
Prevent from setting to the maximum sequrnce number
as this would cause for traffic drop.
From Leon Romanovsky.
6) Prevent configuration of interface index when offload
is used. Hardware can't handle this case.i
From Leon Romanovsky.
7) Always use kfree_sensitive() for SA secret zeroization.
From Zilin Guan.
ipsec-next-2025-05-23
* tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: use kfree_sensitive() for SA secret zeroization
xfrm: prevent configuration of interface index when offload is used
xfrm: validate assignment of maximal possible SEQ number
xfrm: Refactor migration setup during the cloning process
xfrm: Migrate offload configuration
bonding: Fix multiple long standing offload races
bonding: Mark active offloaded xfrm_states
xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}
xfrm: Remove unneeded device check from validate_xmit_xfrm
xfrm: Use xdo.dev instead of xdo.real_dev
net/mlx5: Avoid using xso.real_dev unnecessarily
xfrm: Remove unnecessary strscpy_pad() size arguments
====================
Link: https://patch.msgid.link/20250523075611.3723340-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a2 ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idpf_vport_splitq_napi_poll() can incorrectly return @budget
after napi_complete_done() has been called.
This violates NAPI rules, because after napi_complete_done(),
current thread lost napi ownership.
Move the test against POLL_MODE before the napi_complete_done().
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Reported-by: Peter Newman <peternewman@google.com>
Closes: https://lore.kernel.org/netdev/20250520121908.1805732-1-edumazet@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Joshua Hay <joshua.a.hay@intel.com>
Cc: Alan Brady <alan.brady@intel.com>
Cc: Madhu Chittim <madhu.chittim@intel.com>
Cc: Phani Burra <phani.r.burra@intel.com>
Cc: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Link: https://patch.msgid.link/20250520124030.1983936-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
idpf_features_check is used to validate the TX packet. skb header
length is compared with the hardware supported value received from
the device control plane. The value is stored in the adapter structure
and to access it, vport pointer is used. During reset all the vports
are released and the vport pointer that the netdev private structure
points to is NULL.
To avoid null-ptr-deref, store the max header length value in netdev
private structure. This also helps to cache the value and avoid
accessing adapter pointer in hot path.
BUG: kernel NULL pointer dereference, address: 0000000000000068
...
RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf]
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x154/0x520
? exc_page_fault+0x76/0x190
? asm_exc_page_fault+0x26/0x30
? idpf_features_check+0x6d/0xe0 [idpf]
netif_skb_features+0x88/0x310
validate_xmit_skb+0x2a/0x2b0
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x19d/0x3a0
__dev_queue_xmit+0xb74/0xe70
...
Fixes: a251eee621 ("idpf: add SRIOV support and other ndo_ops")
Reviewed-by: Madhu Chititm <madhu.chittim@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If an aggregate has the following conditions:
- The SRIOV LAG DDP package has been enabled
- The bond is in 802.3ad LACP mode
- The bond is disqualified from supporting SRIOV VF LAG
- Both interfaces were added simultaneously to the bond (same command)
Then there is a chance that the two interfaces will be assigned different
LACP Aggregator ID's. This will cause a failure of the LACP control over
the bond.
To fix this, we can detect if the primary interface for the bond (as
defined by the driver) is not in switchdev mode, and exit the setup flow
if so.
Reproduction steps:
%> ip link add bond0 type bond mode 802.3ad miimon 100
%> ip link set bond0 up
%> ifenslave bond0 eth0 eth1
%> cat /proc/net/bonding/bond0 | grep Agg
Check for Aggregator IDs that differ.
Fixes: ec5a6c5f79 ("ice: process events created by lag netdev event handler")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_vc_repr_add_mac() function indicates that it does not store the MAC
address filters in the firmware. However, it still increments vf->num_mac.
This is incorrect, as vf->num_mac should represent the number of MAC
filters currently programmed to firmware.
Indeed, we only perform this increment if the requested filter is a unicast
address that doesn't match the existing vf->hw_lan_addr. In addition,
ice_vc_repr_del_mac() does not decrement the vf->num_mac counter. This
results in the counter becoming out of sync with the actual count.
As it turns out, vf->num_mac is currently only used in legacy made without
port representors. The single place where the value is checked is for
enforcing a filter limit on untrusted VFs.
Upcoming patches to support VF Live Migration will use this value when
determining the size of the TLV for MAC address filters. Fix the
representor mode function to stop incrementing the counter incorrectly.
Fixes: ac19e03ef7 ("ice: allow process VF opcodes in different ways")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add Rx timestamp function when the Rx timestamp value is read directly
from the Rx descriptor. In order to extend the Rx timestamp value to 64
bit in hot path, the PHC time is cached in the receive groups.
Add supported Rx timestamp modes.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: YiFei Zhu <zhuyifei@google.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add functions to request Tx timestamp for the PTP packets, read the Tx
timestamp when the completion tag for that packet is being received,
extend the Tx timestamp value and set the supported timestamping modes.
Tx timestamp is requested for the PTP packets by setting a TSYN bit and
index value in the Tx context descriptor. The driver assumption is that
the Tx timestamp value is ready to be read when the completion tag is
received. Then the driver schedules delayed work and the Tx timestamp
value read is requested through virtchnl message. At the end, the Tx
timestamp value is extended to 64-bit and provided back to the skb.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Josh Hay <joshua.a.hay@intel.com>
Signed-off-by: Josh Hay <joshua.a.hay@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tx timestamp capabilities are negotiated for the uplink Vport.
Driver receives information about the number of available Tx timestamp
latches, the size of Tx timestamp value and the set of indexes used
for Tx timestamping.
Add function to get the Tx timestamp capabilities and parse the uplink
vport flag.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP clock configuration operations - set time, adjust time and adjust
frequency are required to control the clock and maintain synchronization
process.
Extend get PTP capabilities function to request for the clock adjustments
and add functions to enable these actions using dedicated virtchnl
messages.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the access to read PTP clock is specified as mailbox, the driver
needs to send virtchnl message to perform PTP actions. Message is sent
using idpf_mbq_opc_send_msg_to_peer_drv mailbox opcode, with the parameters
received during PTP capabilities negotiation.
Add functions to recognize PTP messages, move them to dedicated secondary
mailbox, read the PTP clock time and cross timestamp using mailbox
messages.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP capabilities are negotiated using virtchnl command. Add get
capabilities function, direct access to read the PTP clock.
Set initial PTP capabilities exposed to the stack.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Willem de Bruijn <willemb@google.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Move virtchnl structures to the header file to expose them for the PTP
virtchnl file.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP capabilities are negotiated using virtchnl commands. There are two
available modes of the PTP support: direct and mailbox. When the direct
access to PTP resources is negotiated, virtchnl messages returns a set
of registers that allow read/write directly. When the mailbox access to
PTP resources is negotiated, virtchnl messages are used to access
PTP clock and to read the timestamp values.
Virtchnl API covers both modes and exposes a set of PTP capabilities.
Using virtchnl API, the driver recognizes also HW abilities - maximum
adjustment of the clock and the basic increment value.
Additionally, API allows to configure the secondary mailbox, dedicated
exclusively for PTP purposes.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
PTP feature is supported if the VIRTCHNL2_CAP_PTP is negotiated during the
capabilities recognition. Initial PTP support includes PTP initialization
and registration of the clock.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Mina Almasry <almasrymina@google.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Since workqueues are created per CPU, the works scheduled to this
workqueues are run on the CPU they were assigned. It may result in
overloaded CPU that is not able to handle virtchnl messages in
relatively short time. Allocating workqueue with WQ_UNBOUND and
WQ_HIGHPRI flags allows scheduler to queue virtchl messages on less loaded
CPUs, what eliminates delays.
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Tony Nguyen says:
====================
Prepare for Intel IPU E2000 (GEN3)
This is the first part in introducing RDMA support for idpf.
----------------------------------------------------------------
Tatyana Nikolova says:
To align with review comments, the patch series introducing RDMA
RoCEv2 support for the Intel Infrastructure Processing Unit (IPU)
E2000 line of products is going to be submitted in three parts:
1. Modify ice to use specific and common IIDC definitions and
pass a core device info to irdma.
2. Add RDMA support to idpf and modify idpf to use specific and
common IIDC definitions and pass a core device info to irdma.
3. Add RDMA RoCEv2 support for the E2000 products, referred to as
GEN3 to irdma.
This first part is a 5 patch series based on the original
"iidc/ice/irdma: Update IDC to support multiple consumers" patch
to allow for multiple CORE PCI drivers, using the auxbus.
Patches:
1) Move header file to new name for clarity and replace ice
specific DSCP define with a kernel equivalent one in irdma
2) Unify naming convention
3) Separate header file into common and driver specific info
4) Replace ice specific DSCP define with a kernel equivalent
one in ice
5) Implement core device info struct and update drivers to use it
----------------------------------------------------------------
v1: https://lore.kernel.org/20250505212037.2092288-1-anthony.l.nguyen@intel.com
IWL reviews:
[v5] https://lore.kernel.org/20250416021549.606-1-tatyana.e.nikolova@intel.com
[v4] https://lore.kernel.org/20250225050428.2166-1-tatyana.e.nikolova@intel.com
[v3] https://lore.kernel.org/20250207194931.1569-1-tatyana.e.nikolova@intel.com
[v2] https://lore.kernel.org/20240824031924.421-1-tatyana.e.nikolova@intel.com
[v1] https://lore.kernel.org/20240724233917.704-1-tatyana.e.nikolova@intel.com
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/linux:
iidc/ice/irdma: Update IDC to support multiple consumers
ice: Replace ice specific DSCP mapping num with a kernel define
iidc/ice/irdma: Break iidc.h into two headers
iidc/ice/irdma: Rename to iidc_* convention
iidc/ice/irdma: Rename IDC header file
====================
Link: https://patch.msgid.link/20250509200712.2911060-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation of supporting more than a single core PCI driver
for RDMA, move ice specific structs like qset_params, qos_info
and qos_params from iidc_rdma.h to iidc_rdma_ice.h.
Previously, the ice driver was just exporting its entire PF struct
to the auxiliary driver, but since each core driver will have its own
different PF struct, implement a universal struct that all core drivers
can provide to the auxiliary driver through the probe call.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Co-developed-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Co-developed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Co-developed-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use Device Serial Number instead of PCI bus/device/function for
the index of struct ice_adapter.
Functions on the same physical device should point to the very same
ice_adapter instance, but with two PFs, when at least one of them is
PCI-e passed-through to a VM, it is no longer the case - PFs will get
seemingly random PCI BDF values, and thus indices, what finally leds to
each of them being on their own instance of ice_adapter. That causes them
to don't attempt any synchronization of the PTP HW clock usage, or any
other future resources.
DSN works nicely in place of the index, as it is "immutable" in terms of
virtualization.
Fixes: 0e2bddf9e5 ("ice: add ice_adapter for shared data across PFs on the same NIC")
Suggested-by: Jacob Keller <jacob.e.keller@intel.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20250505161939.2083581-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-04-29 (igb, igc, ixgbe, idpf)
For igb:
Kurt Kanzenbach adds linking of IRQs and queues to NAPI instances and
adds persistent NAPI config. Lastly, he removes undesired IRQs that
occur while busy polling.
For igc:
Kurt Kanzenbach switches the Tx mode for MQPRIO offload to harmonize the
current implementation with TAPRIO.
For ixgbe:
Jedrzej adds separate ethtool ops for E610 devices to account for device
differences.
Slawomir adds devlink region support for E610 devices.
For idpf:
Mateusz assigns and utilizes the ptype field out of libeth_rqe_info.
Michal removes unreachable code.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: remove unreachable code from setting mailbox
idpf: assign extracted ptype to struct libeth_rqe_info field
ixgbe: devlink: add devlink region support for E610
ixgbe: add E610 .set_phys_id() callback implementation
ixgbe: apply different rules for setting FC on E610
ixgbe: add support for ACPI WOL for E610
ixgbe: create E610 specific ethtool_ops structure
igc: Change Tx mode for MQPRIO offloading
igc: Limit netdev_tc calls to MQPRIO
igb: Get rid of spurious interrupts
igb: Add support for persistent NAPI config
igb: Link queues to NAPI instances
igb: Link IRQs to NAPI instances
====================
Link: https://patch.msgid.link/20250429234651.3982025-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace ice driver specific DSCP mapping number defines
ICE_DSCP_NUM_VAL and IIDC_MAX_DSCP_MAPPING with
an equivalent kernel define DSCP_MAX.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation of supporting more than a single core PCI driver
for RDMA, break the iidc_rdma.h header file into two more focused
headers.
Only the elements universal to all Intel drivers will remain in
the generic iidc_rdma.h header. Move the ice specific information
to an ice specific header file named iidc_rdma_ice.h.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation of supporting more than a single core PCI driver
for RDMA, homogenize naming to iidc_rdma_* and IIDC_RDMA_*
form.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
To prepare for the IDC upgrade to support different CORE
PCI drivers, rename header file from iidc.h to iidc_rdma.h
since this files functionality is specifically for RDMA support.
Use net/dscp.h include in irdma osdep.h and DSCP_MAX type.h,
instead of iidc header and define.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Remove code that isn't reached. There is no need to check for
adapter->req_vec_chunks, because if it isn't set idpf_set_mb_vec_id()
won't be called.
Only one path when idpf_set_mb_vec_id() is called:
idpf_intr_req()
-> idpf_send_alloc_vectors_msg() -> adapter->req_vec_chunk is allocated
here, otherwise an error is returned and idpf_intr_req() exits with an
error.
The idpf_set_mb_vec_id() becomes one-liner and it is called only once.
Remove it and set mailbox vector index directly.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Assign the ptype extracted from qword to the ptype field of struct
libeth_rqe_info.
Remove the now excess ptype param of idpf_rx_singleq_extract_fields(),
idpf_rx_singleq_extract_base_fields() and
idpf_rx_singleq_extract_flex_fields().
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Provide support for the following devlink cmds:
-DEVLINK_CMD_REGION_GET
-DEVLINK_CMD_REGION_NEW
-DEVLINK_CMD_REGION_DEL
-DEVLINK_CMD_REGION_READ
ixgbe devlink region implementation, similarly to the ice one,
lets user to create snapshots of content of Non Volatile Memory,
content of Shadow RAM, and capabilities of the device.
For both NVM and SRAM regions provide .read() handler to let user
read their contents without the need to create full snapshots.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Slawomir Mrozowicz <slawomirx.mrozowicz@intel.com>
Co-developed-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Bharath R <bharath.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
