In the current driver, the MAC address is set in both fec_restart() and
fec_set_mac_address(), so a generic helper function fec_set_hw_mac_addr()
is added to set the hardware MAC address to make the code more compact.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250711091639.1374411-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are also some RCR bits that are not defined but are used by the
driver, so add macro definitions for these bits to improve readability
and maintainability.
In addition, although FEC_RCR_HALFDPX has been defined, it is not used
in the driver. According to the description of FEC_RCR[1] in RM, it is
used to disable receive on transmit. Therefore, it is more appropriate
to redefine FEC_RCR[1] as FEC_RCR_DRT.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250711091639.1374411-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the generic helper function phy_interface_mode_is_rgmii() to check
RGMII mode.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250711091639.1374411-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The counters of port MAC are all 64-bit registers, and the statistics of
ethtool are u64 type, so replace enetc_port_rd() with enetc_port_rd64()
to read 64-bit statistics.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250627021108.3359642-4-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some counters in enetc_port_counters are 32-bit registers, and some are
64-bit registers. But in the current driver, they are all read through
enetc_port_rd(), which can only read a 32-bit value. Therefore, separate
64-bit counters (enetc_pm_counters) from enetc_port_counters and use
enetc_port_rd64() to read the 64-bit statistics.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250627021108.3359642-3-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The statistics of the ring are all unsigned int type, so the statistics
will overflow quickly under heavy traffic. In addition, the statistics
of struct net_device_stats are obtained from struct enetc_ring_stats,
but the statistics of net_device_stats are unsigned long type. So it is
better to keep the statistics types consistent in these two structures.
Considering these two factors, and the fact that both LS1028A and i.MX95
are arm64 architecture, the statistics of enetc_ring_stats are changed
to unsigned long type. Note that unsigned int and unsigned long are the
same thing on some systems, and on such systems there is no overflow
advantage of one over the other.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250627021108.3359642-2-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the current implementation, IP coalescing is always enabled and
cannot be disabled.
As setting maximum frames to 0 or 1, or setting delay to zero implies
immediate delivery of single packets/IRQs, disable coalescing in
hardware in these cases.
This also guarantees that coalescing is never enabled with ICFT or ICTT
set to zero, a configuration that could lead to unpredictable behaviour
according to i.MX8MP reference manual.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250626-fec_deactivate_coalescing-v2-1-0b217f2e80da@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver registered xdp_rxq_info structures via xdp_rxq_info_reg()
but failed to properly unregister them in error paths and during
removal.
Fixes: d678be1dc1 ("dpaa2-eth: add XDP_REDIRECT support")
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/20250626133003.80136-1-wangfushuai@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enetc_hw.h provides two versions of _enetc_rd_reg64.
One which simply calls ioread64() when available.
And another that composes the 64-bit result from ioread32() calls.
In the second case the code appears to assume that each ioread32() call
returns a little-endian value. However both the shift and logical or
used to compose the return value would not work correctly on big endian
systems if this were the case. Moreover, this is inconsistent with the
first case where the return value of ioread64() is assumed to be in host
byte order.
It appears that the correct approach is for both versions to treat the
return value of ioread*() functions as being in host byte order. And
this patch corrects the ioread32()-based version to do so.
This is a bug but would only manifest on big endian systems
that make use of the ioread32-based implementation of _enetc_rd_reg64.
While all in-tree users of this driver are little endian and
make use of the ioread64-based implementation of _enetc_rd_reg64.
Thus, no in-tree user of this driver is affected by this bug.
Flagged by Sparse.
Compile tested only.
Fixes: 16eb4c85c9 ("enetc: Add ethtool statistics")
Closes: https://lore.kernel.org/all/AM9PR04MB850500D3FC24FE23DEFCEA158879A@AM9PR04MB8505.eurprd04.prod.outlook.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250624-etnetc-le-v1-1-a73a95d96e4e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch avoids another update of the consumer at the end of
dpaa2_xsk_tx().
In the zero copy xmit path, two versions (batched and non-batched)
regarding how the consumer of tx ring changes are implemented in
xsk_tx_peek_release_desc_batch() that eventually updates the local
consumer to the global consumer in either of the following call trace:
1) batched mode:
xsk_tx_peek_release_desc_batch()
__xskq_cons_release()
2) non-batched mode:
xsk_tx_peek_release_desc_batch()
xsk_tx_peek_release_fallback()
xsk_tx_release()
As we can see, dpaa2_xsk_tx() doesn't need to call extra release function
to handle the sync of consumer itself.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250623120159.68374-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can avoid open-coding the loop construct which counts firmware child
nodes with a specific name by using the newly added
device_get_named_child_node_count().
The gianfar driver has such open-coded loop. Replace it with the
device_get_child_node_count_named().
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3a33988fc042588cb00a0bfc5ad64e749cb0eb1f.1750248902.git.mazziesaccount@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to clean up of the VLAN handling, factor out the VLAN
handling into separate function fec_enet_rx_vlan().
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-11-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move __vlan_hwaccel_put_tag() into the if statement that sets
vlan_packet_rcvd = true. This change eliminates the unnecessary
vlan_packet_rcvd variable, simplifying the code and improving clarity.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-10-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to clean up of the VLAN handling, reduce the scope of data.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-9-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For better readability and maintainability, use the provided helper function
skb_vlan_eth_hdr() to replace manual the VLAN header calculation, and change
the type of vlan_header to struct vlan_ethhdr to take into account that the
Ethernet header plus VLAN header is returned.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-8-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are the functions fec_enet_rx_queue() and fec_enet_tx_queue(),
one for handling the RX queue the other one handles the TX queue.
However they don't have the same signature. Align fec_enet_rx_queue()
argument order with fec_enet_tx_queue() to make code more readable.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-7-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace "1 << 5" for configuring 1000 MBit/s with a defined constant to
improve code readability and maintainability.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-6-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In da722186f6 ("net: fec: set GPR bit on suspend by DT
configuration.") the platform_device_id fec_devtype::driver_data was
converted from holding the quirks to a pointing to struct fec_devinfo.
The struct fec_devinfo holding the information for the i.MX6SX was
named fec_imx6x_info.
Rename fec_imx6x_info to fec_imx6sx_info to align with the SoC's name.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-5-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a preparation patch to make addition of new includes easier
without breaking the alphabetic order.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-4-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 4d494cdc92 ("net: fec: change data structure to support
multiqueue") the data structures were changed, so that the comment about
the sent-in-place skb doesn't apply any more. Remove it.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-2-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
codespell has found some typos in the comments, fix them.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-1-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This effectively reverts 6e8b0ff1ba ("dpaa_eth: Add change_carrier()
for Fixed PHYs"). Usage of fixed_phy_change_carrier() requires that
fixed_phy_register() has been called before, directly or indirectly.
And that's not the case in this driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/7eb189b3-d5fd-4be6-8517-a66671a4e4e3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
RXFH is all this driver supports in RXNFC so old callbacks are
completely removed.
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20250617014848.436741-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both PF and VF have rx-vlan-offload enabled, however, the PCVLANR1/2
registers are resources controlled by PF, so VF cannot access these
two registers. Fortunately, the hardware provides SICVLANR1/2 registers
for each SI to reflect the value of PCVLANR1/2 registers. Therefore,
use SICVLANR1/2 instead of PCVLANR1/2. Note that this is not an issue
in actual use, because the current driver does not support custom TPID,
the driver will not access these two registers in actual use, so this
modification is just an optimization.
In addition, since ENETC_RXBD_FLAG_TPID is defined as GENMASK(1, 0),
the possible values are only 0, 1, 2, 3, so the default branch will
never be true, so remove the default branch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250613093605.39277-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Uniquely, this driver supports only the SET operation. It does not
support GET at all. The SET callback also always returns 0, even
tho it checks a bunch of conditions, and if my quick reading is
right, expects the user to insert filtering rules for given flow
type first? Long story short it seems too convoluted to easily
add the GET as part of the conversion.
Link: https://patch.msgid.link/20250613172751.3754732-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
This driver's RXFH config is read only / fixed so the conversion
is trivial.
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250614180638.4166766-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'managed' is a non-boolean property specified in ethernet-controller.yaml.
Since commit c141ecc3ce ("of: Warn when of_property_read_bool() is
used on non-boolean properties") this raises a warning. Use the
replacement of_property_present() instead.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250610114057.414791-1-alexander.stein@ew.tq-group.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel robot reported the following errors when the netc-lib driver
was compiled as a loadable module and the enetc-core driver was built-in.
ld.lld: error: undefined symbol: ntmp_init_cbdr
referenced by enetc_cbdr.c:88 (drivers/net/ethernet/freescale/enetc/enetc_cbdr.c:88)
ld.lld: error: undefined symbol: ntmp_free_cbdr
referenced by enetc_cbdr.c:96 (drivers/net/ethernet/freescale/enetc/enetc_cbdr.c:96)
Simply changing "tristate" to "bool" can fix this issue, but considering
that the netc-lib driver needs to support being compiled as a loadable
module and LS1028 does not need the netc-lib driver. Therefore, we add a
boolean symbol 'NXP_NTMP' to enable 'NXP_NETC_LIB' as needed. And when
adding NETC switch driver support in the future, there is no need to
modify the dependency, just select "NXP_NTMP" and "NXP_NETC_LIB" at the
same time.
Reported-by: Arnd Bergmann <arnd@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505220734.x6TF6oHR-lkp@intel.com/
Fixes: 4701073c3d ("net: enetc: add initial netc-lib driver to support NTMP")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the handling of err_wq_init and err_reg_netdev paths in
enetc4_pf_netdev_create() function.
Fixes: 6c5bafba34 ("net: enetc: add MAC filtering for i.MX95 ENETC PF")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250516052734.3624191-1-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MDIO_DEVRES is only set where PHYLIB/PHYLINK are set which
select MDIO_DEVRES. So we can remove this symbol.
Note: Due to circular module dependencies we can't simply
make mdio_devres.c part of phylib.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://patch.msgid.link/27cba535-f507-4b32-84a3-0744c783a465@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel test robot reported the following error:
drivers/net/ethernet/freescale/enetc/ntmp.c: In function 'ntmp_fill_request_hdr':
drivers/net/ethernet/freescale/enetc/ntmp.c:203:38: error: implicit
declaration of function 'FIELD_PREP' [-Wimplicit-function-declaration]
203 | cbd->req_hdr.access_method = FIELD_PREP(NTMP_ACCESS_METHOD,
| ^~~~~~~~~~
Therefore, add "bitfield.h" to ntmp_private.h to fix this issue.
Fixes: 4701073c3d ("net: enetc: add initial netc-lib driver to support NTMP")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505101047.NTMcerZE-lkp@intel.com/
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New timestamping API was introduced in commit 66f7223039 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the ENETC driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
Move the enetc_hwtstamp_get() and enetc_hwtstamp_set() calls away from
enetc_ioctl() to dedicated net_device_ops for the LS1028A PF and VF
(NETC v4 does not yet implement enetc_ioctl()), adapt the prototypes and
export these symbols (enetc_ioctl() is also exported).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250512112402.4100618-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New timestamping API was introduced in commit 66f7223039 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the gianfar driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
Don't propagate the unnecessary "config.flags = 0;" assignment to
gfar_hwtstamp_get(), because dev_get_hwtstamp() provides a zero
initialized struct kernel_hwtstamp_config.
After removing timestamping logic from gfar_ioctl(), the rest is
equivalent to phy_do_ioctl_running(), so provide that directly as our
ndo_eth_ioctl() implementation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LS1021A
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508143659.1944220-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow SIOCGHWTSTAMP to retrieve the current timestamping settings on
DPNIs. This reflects what has been done in dpaa2_eth_hwtstamp_set().
Tested with hwstamp_ctl -i endpmac17. Before the change, it prints
"Device driver does not have support for non-destructive SIOCGHWTSTAMP."
After the change, it retrieves the previously set configuration.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LX2160A
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508134102.1747075-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New timestamping API was introduced in commit 66f7223039 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the DPAA2 Ethernet driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
This driver only responds to SIOCSHWTSTAMP (not SIOCGHWTSTAMP) so
convert just that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> # LX2160A
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250508134102.1747075-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
phylink_mii_ioctl() handles multiple ioctls in addition to just
SIOCGMIIREG: SIOCGMIIPHY, SIOCSMIIREG. Don't filter these out.
Also, phylink can handle the case where net_dev->phydev is NULL (like
optical SFP module, fixed-link). Be like other drivers and let phylink
do so without any driver-side call filtering.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow SIOCGHWTSTAMP to retrieve the current timestamping settings
on DPAA1 interfaces. This reflects what has been done in
dpaa_hwtstamp_set().
Tested with hwstamp_ctl -i fm1-mac9.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New timestamping API was introduced in commit 66f7223039 ("net: add
NDOs for configuring hardware timestamping") from kernel v6.6. It is
time to convert the DPAA1 driver to the new API, so that the
ndo_eth_ioctl() path can be removed completely.
This driver only responds to SIOCSHWTSTAMP (not SIOCGHWTSTAMP) so
convert just that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Link: https://patch.msgid.link/20250508124753.1492742-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add internal loopback support for i.MX95 ENETC PF, the default loopback
mode is MAC level loopback, the MAC Tx data is looped back onto the Rx.
The MAC interface runs at a fixed 1:8 ratio of NETC clock in MAC-level
loopback mode, with no dependency on Tx clock.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-15-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the offsets of the VLAN hash filter registers of ENETC v4 are
different from ENETC v1. Therefore, enetc_set_si_vlan_ht_filter() is
added to set the correct VLAN hash filter based on the SI ID and ENETC
revision, so that ENETC v4 PF driver can reuse enetc_vlan_rx_add_vid()
and enetc_vlan_rx_del_vid(). In addition, the VLAN promiscuous mode will
be enabled if VLAN filtering is disabled, which means that PF qualifies
for reception of all VLAN tags.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-14-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VLAN hash filters of ENETC v1 and v4 are basically the same, the only
difference is that the offset of the VLAN hash filter registers has been
changed in ENETC v4. So some functions like enetc_vlan_rx_add_vid() and
enetc_vlan_rx_del_vid() only need to be slightly modified to be reused
by ENETC v4. Currently, we just move these functions from enetc_pf.c to
enetc_pf_common.c. Appropriate modifications will be made for ENETC4 in
a subsequent patch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-13-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract the common function enetc_refresh_vlan_ht_filter() from
enetc_sync_vlan_ht_filter() so that it can be reused by the ENETC
v4 PF and VF drivers in the future.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-12-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Receive side scaling (RSS) is a network driver technology that enables
the efficient distribution of network receive processing across multiple
CPUs in multiprocessor systems. Therefore, it is better to enable RSS by
default so that the CPU load can be balanced and network performance can
be improved when then network is enabled.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Acked-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-11-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Actually enetc_set_rss() does not need a return value, so change its
type to void.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-10-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Compared with LS1028A, there are two main differences: first, i.MX95
ENETC uses NTMP 2.0 to manage the RSS table, and second, the offset
of the RSS Key registers is different. Some modifications have been
made in the previous patches based on these differences to ensure that
the relevant interfaces are compatible with i.MX95. So it's time to
add RSS support to i.MX95 ENETC PF.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250506080735.3444381-9-wei.fang@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
