Do not leave host with dangling ->mrq pointer if we hit
the msdc_prepare_data() error out path.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: f5de469990 ("mtk-sd: Prevent memory corruption from DMA map failure")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250625052106.584905-1-senozhatsky@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It has turned out the trying to strictly conform to the SDHCI specification
is causing problems. Let's revert and start over.
This reverts commit fb3bbc46c9.
Cc: Erick Shepherd <erick.shepherd@ni.com>
Cc: stable@vger.kernel.org
Fixes: fb3bbc46c9 ("mmc: sdhci: Disable SD card clock before changing parameters")
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Reported-by: Jonathan Liu <net147@gmail.com>
Reported-by: Salvatore Bonaccorso <carnil@debian.org>
Closes: https://bugs.debian.org/1108065
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20250624110932.176925-1-ulf.hansson@linaro.org
Adjust some error messages to debug mode and register dump to dynamic
debug mode to avoid causing misunderstanding it is an error.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250606110121.96314-4-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Adjust some error messages to debug mode to avoid causing
misunderstanding it is an error.
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 9a9f7e1395 ("mmc: core: Support UHS-II card control and access")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250606110121.96314-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If msdc_prepare_data() fails to map the DMA region, the request is
not prepared for data receiving, but msdc_start_data() proceeds
the DMA with previous setting.
Since this will lead a memory corruption, we have to stop the
request operation soon after the msdc_prepare_data() fails to
prepare it.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fixes: 208489032b ("mmc: mediatek: Add Mediatek MMC driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174972756982.3337526.6755001617701603082.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When swiotlb buffer is full, the dma_map_sg() returns 0 to
msdc_prepare_data(), but it does not check it and sets the
MSDC_PREPARE_FLAG.
swiotlb_tbl_map_single() /* prints "swiotlb buffer is full" */
<-swiotlb_map()
<-dma_direct_map_page()
<-dma_direct_map_sg()
<-__dma_map_sg_attrs()
<-dma_map_sg_attrs()
<-dma_map_sg() /* returns 0 (pages mapped) */
<-msdc_prepare_data()
Then, the msdc_unprepare_data() checks MSDC_PREPARE_FLAG and calls
dma_unmap_sg() with unmapped pages. It causes a page fault.
To fix this problem, Do not set MSDC_PREPARE_FLAG if dma_map_sg()
fails because this is not prepared.
Fixes: 208489032b ("mmc: mediatek: Add Mediatek MMC driver")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/174908565814.4056588.769599127120955383.stgit@mhiramat.tok.corp.google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If spacemit_sdhci_get_clocks() fails, then propagate the error code.
Don't return success.
Fixes: e5502d15b0 ("mmc: sdhci-of-k1: add support for SpacemiT K1 SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/aDVTtQdXVtRhxOrb@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move the BROKEN_SD_DISCARD quirk for certain SanDisk SD cards from the
`mmc_blk_fixups[]` to `mmc_sd_fixups[]`. This ensures the quirk is
applied earlier in the device initialization process, aligning with the
reasoning in [1]. Applying the quirk sooner prevents the kernel from
incorrectly enabling discard support on affected cards during initial
setup.
[1] https://lore.kernel.org/all/20240820230631.GA436523@sony.com
Fixes: 07d2872bf4 ("mmc: core: Add SD card quirk for broken discard")
Signed-off-by: Avri Altman <avri.altman@sandisk.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250526114445.675548-1-avri.altman@sandisk.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target,
hisi_sas) with the only substantive core change being the removal of
the stream_status member from the scsi_stream_status_header (to get
rid of flex array members).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCaDiQ2CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishWtDAP9p0Jd/
H4VMpYT5iETyq3TeAXTm1jVXL9Gnux5JMfskGwEA9kST8O6gorVOVKck+Eq0Hc9r
w8NDnBK91hknIai5kE8=
=/1L9
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (smartpqi, ufs, lpfc, scsi_debug, target,
hisi_sas) with the only substantive core change being the removal of
the stream_status member from the scsi_stream_status_header (to get
rid of flex array members)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (77 commits)
scsi: target: core: Constify struct target_opcode_descriptor
scsi: target: core: Constify enabled() in struct target_opcode_descriptor
scsi: hisi_sas: Fix warning detected by sparse
scsi: mpt3sas: Fix _ctl_get_mpt_mctp_passthru_adapter() to return IOC pointer
scsi: sg: Remove unnecessary NULL check before unregister_sysctl_table()
scsi: ufs: mcq: Delete ufshcd_release_scsi_cmd() in ufshcd_mcq_abort()
scsi: ufs: qcom: dt-bindings: Document the SM8750 UFS Controller
scsi: mvsas: Fix typos in SAS/SATA VSP register comments
scsi: fnic: Replace memset() with eth_zero_addr()
scsi: ufs: core: Support updating device command timeout
scsi: ufs: core: Change hwq_id type and value
scsi: ufs: core: Increase the UIC command timeout further
scsi: zfcp: Simplify workqueue allocation
scsi: ufs: core: Print error value as hex format in ufshcd_err_handler()
scsi: sd: Remove the stream_status member from scsi_stream_status_header
scsi: docs: Clean up some style in scsi_mid_low_api
scsi: core: Remove unused scsi_dev_info_list_del_keyed()
scsi: isci: Remove unused sci_remote_device_reset()
scsi: scsi_debug: Reduce DEF_ATOMIC_WR_MAX_LENGTH
scsi: smartpqi: Delete a stray tab in pqi_is_parity_write_stream()
...
Merge the mmc fixes for v6.15-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.16.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a new struct for platform data for the ti,am62-sdhci compatible to
apply additional quirks, namely "SDHCI_QUIRK2_SUPPRESS_V1P8_ENA", to
host controllers with am62 compatible.
Note, the fix was originally introduced by commit 941a7abd46
("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch") but was
found to be applied too broadly and had to be reverted.
This fixes MMC init failures seen across am62x boards.
Fixes: ac5a41b472 ("Revert "mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch"")
Fixes: 941a7abd46 ("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch")
Cc: stable@vger.kernel.org
Suggested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250516203121.3736379-1-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Current suspend/resume logic has one issue. In suspend, will config
register when call sdhci_suspend_host(), but at this time, can't
guarantee host in runtime resume state. If not, the per clock is gate
off, access register will hang.
In sdhci_esdhc_suspend/sdhci_esdhc_resume, remove sdhci_suspend_host()
and sdhci_resume_host(), all are handled in runtime PM callbacks except
the wakeup irq setting. For wakeup irq setting, use pm_runtime_get_sync()
in sdhci_esdhc_suspend() to make sure clock gate on.
Remove pinctrl_pm_select_default_state() in sdhci_esdhc_resume, because
pm_runtime_force_resume() already config the pinctrl state according to
ios timing, and here config the default pinctrl state again is wrong for
SDIO3.0 device if it keep power in suspend.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250514094903.1771642-2-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Export the sdhci_enable_irq_wakeups() and sdhci_disable_irq_wakeups,
so other driver can use them.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250514094903.1771642-1-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SDHCI controller found in SpacemiT K1 SoC features SD,
SDIO, eMMC support, such as:
- Compatible for 4-bit SDIO 3.0 UHS-I protocol, up to SDR104
- Compatible for 4-bit SD 3.0 UHS-I protocol, up to SDR104
- Compatible for 8bit eMMC5.1, up to HS400
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250509-20-k1-sdhci-v3-2-526c35feaa20@gentoo.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It appears that some vendors provision the boot areas with valid part
tables (GPT) in order to have identifiable partitions for device and
firmware specific data, such has the qualcomm CDT (Qualcomm Config
Data Table). Additionally, these boot areas can be utilized to host
device-specific IDs, calibration data, and other critical information.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250507134538.575912-1-loic.poulain@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.15-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.16.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It is not obvious that this functions checks capabilities. Rename it to
include '_can' like other capability helpers and reword it slightly.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250501063325.7262-10-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Fix warnings when CONFIG_PM=y and CONFIG_PM_SLEEP is not set by
surrounding the 2 functions with #ifdef CONFIG_PM_SLEEP.
drivers/mmc/host/sdhci-esdhc-imx.c:1659:13: warning: 'sdhc_esdhc_tuning_restore' defined but not used [-Wunused-function]
1659 | static void sdhc_esdhc_tuning_restore(struct sdhci_host *host)
drivers/mmc/host/sdhci-esdhc-imx.c:1637:13: warning: 'sdhc_esdhc_tuning_save' defined but not used [-Wunused-function]
1637 | static void sdhc_esdhc_tuning_save(struct sdhci_host *host)
Fixes: 3d1eea493894 ("mmc: sdhci-esdhc-imx: Save tuning value when card stays powered in suspend")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20250424034610.441532-1-rdunlap@infradead.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
RK3576's power domains have a peculiar design where the PD_NVM power
domain, of which the sdhci controller is a part, seemingly does not have
idempotent runtime disable/enable. The end effect is that if PD_NVM gets
turned off by the generic power domain logic because all the devices
depending on it are suspended, then the next time the sdhci device is
unsuspended, it'll hang the SoC as soon as it tries accessing the CQHCI
registers.
RK3576's UFS support needed a new dev_pm_genpd_rpm_always_on function
added to the generic power domains API to handle what appears to be a
similar hardware design.
Use this new function to ask for the same treatment in the sdhci
controller by giving rk3576 its own platform data with its own postinit
function. The benefit of doing this instead of marking the power domains
always on in the power domain core is that we only do this if we know
the platform we're running on actually uses the sdhci controller. For
others, keeping PD_NVM always on would be a waste, as they won't run
into this specific issue. The only other IP in PD_NVM that could be
affected is FSPI0. If it gets a mainline driver, it will probably want
to do the same thing.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: cfee1b5077 ("pmdomain: rockchip: Add support for RK3576 SoC")
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250423-rk3576-emmc-fix-v3-1-0bf80e29967f@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
cavium-thunderx enables its PCI device with pcim_enable_device(). This,
implicitly, switches the function pci_request_regions() into managed
mode, where it becomes a devres function.
The PCI subsystem wants to remove this hybrid nature from its
interfaces. To do so, users of the aforementioned combination of
functions must be ported to non-hybrid functions.
Moreover, since both functions are already managed in this driver, the
calls to pci_release_regions() are unnecessary.
Remove the calls to pci_release_regions().
Replace the call to sometimes-managed pci_request_regions() with one to
the always-managed pcim_request_all_regions().
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250417092742.27887-2-phasta@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This change add a condition for 'single' burst type selection.
Read AXI_LEN field from EMMC50_CFG2(AHB2AXI wrapper) register, if the
value is not 0, it means the HWIP is using AXI as AMBA bus, which do
not support 'single' burst type.
Suggested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Axe Yang <axe.yang@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250411054134.31822-1-axe.yang@mediatek.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Current standard tuning has some limitations:
1. Standard tuning only try 40 times to find first pass window, but this
pass window maybe not the best pass window.
2. Sometimes there are two tuning pass windows and the gap between
those two windows may only have one cell. If tuning step > 1, the gap may
just be skipped and host assumes those two windows as a continuous
windows. This will cause a bad delay cell near the gap to be selected.
3. Standard tuning logic need to detect at least one success and failure
to pass the tuning. If all cells in the tuning window pass, the hardware
will not set the SDHCI_CTRL_TUNED_CLK bit, causing tuning failed.
4. Standard tuning logic only check the CRC, do not really compare the data
pattern. If data pins are connected incorrectly, standard will not detect
this kind of issue.
Switch to manual tuning to avoid those limitations
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250409075550.3413032-7-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Enhance manual tuning configuration reliability by adding tuning control
status checks per the i.MX Reference Manual recommendations.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250409075550.3413032-6-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Expand the auto-tuning window width from 0 to 3 for manual tuning to
account for sampling point shifts caused by temperature change. This change
is based on hardware recommendation, providing enough margin for the
auto-tuning logic to locate valid sampling points.
When config the manual tuning final sample delay, need deduct the auto
tuning window width according to the IP logic.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250409075550.3413032-5-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Expand the auto-tuning window width from 2 to 3 for standard tuning to
account for sampling point shifts caused by temperature change. This change
is based on hardware recommendation, providing 50% more margin for the
auto-tuning logic to locate valid sampling points.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250409075550.3413032-4-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
During manual tuning, residual data in the async FIFO from previous
commands may impact with the tuning process. To ensure a clean state:
1. Set the RST_FIFO bit (SYS_CTRL[22]) to reset the async FIFO.
2. Poll the bit until self-cleared, confirming reset completion.
This hardening ensures the tuning command starts with a clean FIFO state,
improving the reliability of the manual tuning procedure.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250409075550.3413032-3-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
According to the i.MX Reference Manual, the RSTT bit (SYS_CTRL[28]) is
designed to reset the tuning circuit. While the Reference Manual states
that clearing EXECUTE_TUNING bit from 1 to 0 in AUTOCMD12_ERR_STATUS
can also set RSTT, this mechanism only works when the original
EXECUTE_TUNING bit was 1. When the bit is already 0, the tuning circuit
reset will not be triggered.
This explicit reset approach strengthens the tuning reliability and
aligns with the Reference Manual recommendations.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250409075550.3413032-2-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Calculate data timeout value based on clock instead of using max value.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250409072604.3410459-1-ziniu.wang_1@nxp.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'host'.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-12-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'host'.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-11-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'card'. Also, convert to
proper bool type while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-10-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'card'. Also, convert to
proper bool type while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-9-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'card'. Also, convert to
proper bool type while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-8-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'card'. Also, convert to
proper bool type while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-7-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'card'. Also, convert to
proper bool type while we are here. Conversion was simplified by
inverting the logic.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-6-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'card'.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-5-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'card'. Also, convert to
proper bool type while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-4-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'card'. Also, convert to
proper bool type while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-3-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc_can_* functions sometimes relate to the card and sometimes to the host.
Make it obvious by renaming this function to include 'card'. Also, convert to
proper bool type while we are here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250401095847.29271-2-wsa+renesas@sang-engineering.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use the helper of_get_available_child_by_name() to simplify
renesas_sdhi_probe().
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250407092144.35268-1-biju.das.jz@bp.renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In case the controller uses the top_base iospace, most register
read/writes can be changed from multiple RWs to a single read
and a single write.
Where possible, and where it makes sense, aggregate the multiple
reads and writes to just one.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250325110701.52623-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Instead of reading and writing the LOOP_TEST_CONTROL register for
each set or cleared bit, read it once, modify the contents in a
local variable, and then write once.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20250325110701.52623-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
