Add interface to control if package C exit starts at the start of the
undelayed vblank. This is needed to implement workaround for underrun on
idle PSR HW issue (Wa_16025596647).
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-11-jouni.hogander@intel.com
Add interface to block PKG C-state. This is needed to implement workaround
for underrun on idle PSR HW issue (Wa_16025596647).
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-6-jouni.hogander@intel.com
Starting from MTL we don't have a platform agnostic way to validate
DC6 state due to dc6 counter has been removed to validate DC state.
The goal is to validate that the display HW can reach the DC6 power
state. There is no HW DC6 residency counter (and there wasn't such
a counter earlier either), so an alternative way is required. According
to the HW team the display driver has programmed everything correctly in
order to allow the DC6 power state if the DC5 power state is reached
(indicated by the HW DC5 residency counter incrementing) and DC6 is
enabled by the driver.
Driver could take a snapshot of the DC5 residency counter right
after it enables DC6 (dc5_residency_start) and increment the SW
DC6 residency counter right before it disables DC6 or when user space
reads the DC6 counter. So the driver would update the counter at these
two points in the following way:
dc6_residency_counter += dc5_current_count - dc5_start_count
v2: Update the discription. (Imre)
Read dc5 count during dc6 enable and disable then and update
dc6 residency counter. (Imre)
Remove variable from dmc structure. (Jani)
Updated the subject title.
v3: Add i915_power_domains lock to updated dc6 count in debugfs. (Imre)
Use flags to check dc6 enable/disable states. (Imre)
Move the display version check and counter read/update to
a helper. (Imre)
Resize the variable length. (Rodrigo)
Use old dc6 debugfs entry for every platform. (Rodrigo)
v4: Remove superfluous whitespace. (Jani)
Read DMC registers in intel_dmc.c (Jani)
Rename dc6_en_dis to dc6_enabled and change its type to bool. (Jani)
Rename update_dc6_count and move it to intel_dmc.c (Jani)
Rename dc6_en_dis to start_tracking. (Imre)
Have lock for dc6 state read aswelll. (Imre)
Keep the existing way print 'DC5 -> DC6 count' along with
new 'DC6 Allowed Count' print. (Imre)
Add counters in intel_dmc struct. (Imre)
Have interface to return dc6 allowed count. (Imre)
Rename dc6_count to dc6_allowed_count. (Rodrigo)
v5: Rename counters and move in to dc6_allowed structure. (Imre)
Order declaration lines in decreasing line length. (Imre)
Update start_tacking logic. (Imre)
Move get couner inside lock and DISPLAY_VER code to helper. (Imre)
v6: Change intel_dmc_get_dc6_allowed_count return type to bool. (Imre)
Update debugfs print to better allien with old print. (Imre)
Remove braces at if/else for signle line statements. (Imre)
v7: Remove in line variable declaration. (Imre)
v8: Rebase the changes.
Signed-off-by: Mohammed Thasleem <mohammed.thasleem@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250321123707.287745-1-mohammed.thasleem@intel.com
sizeof(struct intel_dmc) > 1024 bytes, allocated on all platforms as
part of struct drm_i915_private, whether they have DMC or not.
Allocate struct intel_dmc dynamically, and hide all the dmc details
behind an opaque pointer in intel_dmc.c.
Care must be taken to take into account all cases: DMC not supported on
the platform, DMC supported but not initialized, and DMC initialized but
not loaded. For the second case, we need to move the wakeref out of
struct intel_dmc.
v2:
- Rebase to kzalloc dmc after runtime pm get (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-4-jani.nikula@intel.com
Start preparing for dynamically allocated struct intel_dmc by adding
i915_to_dmc() and dmc->i915, and using them. Take the future NULL dmc
pointer into account already now, and add separate logging for
initialization in the DMC debugfs.
v3:
- Obtain runtime pm reference first (Imre)
v2:
- Don't reduce debugfs output (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-3-jani.nikula@intel.com
There's only one reference to the struct intel_dmc members dc_state,
target_dc_state, and allowed_dc_mask within intel_dmc.c, begging the
question why they are under struct intel_dmc to begin with.
Moreover, the only references to i915->display.dmc outside of
intel_dmc.c are to these members.
They don't belong. Move them from struct intel_dmc to struct
i915_power_domains, which seems like a more suitable place.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301122944.1298929-1-jani.nikula@intel.com
Make sure that PIPEDMCs are enabled whenever the corresponding pipe is
enabled.
This is required at least by the latest ADLP v2.18 firmware, which adds
a new handler enabled by default and running whenever the pipe is
enabled at the vertical referesh rate.
Bspec: 50344, 67620
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102183324.862279-1-imre.deak@intel.com
Currently, i915 interacts with the Hardware and not with any DMC
ABI/API, so the API is fixed within the platform, hence no need to get
this so-tied version requirement.
v2:
- Use link to firmware guide from kernel documentation for
"References:" instead of mailing list thread. (Rodrigo)
- Provide a more elaborate justification in the commit message.
(Rodrigo)
References: https://www.kernel.org/doc/html/v6.1/driver-api/firmware/firmware-usage-guidelines.html
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221230182422.29680-2-gustavo.sousa@intel.com
Disable the DMC event handlers before loading the firmware and after
uninitializing the display, to make sure the firmware is inactive. This
matches the Bspec "Sequences for Display C5 and C6" page for GEN12+.
Add a TODO comment for doing the same on pre-GEN12 platforms.
v2:
- Add a macro for the number of event handlers.
- Disable the event handlers only on GEN12+.
- s/dev_priv/i915/ in docbook comment.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220728081440.1676857-1-imre.deak@intel.com
Only intel_dmc.c should be accessing dmc details directly.
Need to add an i915_error_printf() stub for
CONFIG_DRM_I915_CAPTURE_ERROR=n.
v2: Add the stub (kernel test robot <lkp@intel.com>)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220330113417.220964-1-jani.nikula@intel.com
Several of our i915 header files, have been including i915_reg.h. This
means that any change to i915_reg.h will trigger a full rebuild of
pretty much every file of the driver, even those that don't have any
kind of register access. Let's delete the i915_reg.h include from all
headers and add an explicit include from the .c files that truly
need the register definitions; those that need a definition of
i915_reg_t for a function definition can get it from i915_reg_defs.h
instead.
We also remove two non-register #define's (VLV_DISPLAY_BASE and
GEN12_SFC_DONE_MAX) into i915_reg_defs.h to allow us to drop the
i915_reg.h include from a couple of headers.
There's probably a lot more header dependency optimization possible, but
the changes here roughly cut the number of files compiled after 'touch
i915_reg.h' in half --- a good first step.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127234334.4016964-7-matthew.d.roper@intel.com
So far we had support for main, PipeA and PipeB
DMC. If we find a binary from PipeA-D, lets load it.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006204547.669464-1-anusha.srivatsa@intel.com
This patch adds Pipe A plumbing to the already
existing parsing and loading functions which is
taken care of in the prep patches. Adding MAX_DMC_FW
to keep track for both Main and Pipe A DMC while loading
the respective blobs.
Also adding present field in dmc_info.
s/find_dmc_fw_offset/csr_set_dmc_fw_offset. While at it add
fw_info_matches_stepping() helper. CSR_PROGRAM() should now
take the starting address of the particular blob (Main or Pipe)
and not hardcode it.
v2: Add dmc_offset and start_mmioaddr fields for dmc_info struct.
v3: Add a missing corner cases of stepping-substepping combination in
fw_info_matches_stepping() helper.
v4: Add macro for start_mmioaddr for V1 package. Simplify code
in dmc_set_fw_offset (Lucas)
Cc: Souza, Jose <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-3-anusha.srivatsa@intel.com
This is a prep patch for Pipe DMC plugging.
Add dmc_info struct in intel_dmc to have all common fields
shared between all DMC's in the package.
Add DMC_FW_MAIN(dmc_id 0) to refer to the blob.
v2: Remove dmc_offset and start_mmioaddr from dmc_info struct (Jose)
Cc: Souza, Jose <jose.souza@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210621191415.29823-2-anusha.srivatsa@intel.com
Move struct intel_dmc from i915_drv.h to intel_dmc.h.
v2: Add includes along with moving the struct.
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-4-anusha.srivatsa@intel.com
We check for dmc_payload being there at various points in the driver.
Replace it with the helper.
v2: rebased.
v3: Move intel_dmc to intel_dmc.h in another patch (Lucas)
v4: Remove headers not needed from intel_dmc.h
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-3-anusha.srivatsa@intel.com
Finally, rename the header and source file from csr to dmc.
v2: Add file rename in Documentation.
- Place headers in orders. (Jani)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518213444.11420-6-anusha.srivatsa@intel.com
