The error handling in gpio_aggregator_parse() was re-written. It now
returns success if there are no GPIOs. Restore the previous behavior
and return -EINVAL instead.
Fixes: 83c8e3df64 ("gpio: aggregator: expose aggregator created via legacy sysfs to configfs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/9dcd5fda7a3819e896d9eee4156e7c46c9a64595.1744452787.git.dan.carpenter@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpio_aggregator_line_alloc() function returns error pointers, but
the callers check for NULL. Update the error checking in the callers.
Fixes: 83c8e3df64 ("gpio: aggregator: expose aggregator created via legacy sysfs to configfs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/cc71d8cf6e9bb4bb8cd9ae5050100081891d9345.1744452787.git.dan.carpenter@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
This code is intended to reject strings that start with "_sysfs" but the
strcmp() limit is wrong so checks the whole string instead of the prefix.
Fixes: 83c8e3df64 ("gpio: aggregator: expose aggregator created via legacy sysfs to configfs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/30210ed77b40b4b6629de659cb56b9ec7832c447.1744452787.git.dan.carpenter@linaro.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpiod_direction_output_raw_commit() function checks if any setter
callback is present before doing anything. As the new GPIO setters with
return values were introduced, make this check also succeed if one is
present.
Fixes: 98ce1eb1fd ("gpiolib: introduce gpio_chip setters that return values")
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250411-mdb-gpiolib-setters-fix-v2-1-9611280d8822@bootlin.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
For aggregators initialized via configfs, write 1 to 'live' waits for
probe completion and returns an error if the probe fails, unlike the
legacy sysfs interface, which is asynchronous.
Since users control the liveness of the aggregator device and might be
editing configurations while 'live' is 0, deferred probing is both
unnatural and unsafe.
Cancel deferred probe for purely configfs-based aggregators when probe
fails.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250407043019.4105613-8-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Expose settings for aggregators created using the sysfs 'new_device'
interface to configfs. Once written to 'new_device', an "_sysfs.<N>" path
appears in the configfs regardless of whether the probe succeeds.
Consequently, users can no longer use that prefix for custom GPIO
aggregator names. The 'live' attribute changes to 1 when the probe
succeeds and the GPIO forwarder is instantiated.
Note that the aggregator device created via sysfs is asynchronous, i.e.
writing into 'new_device' returns without waiting for probe completion,
and the probe may succeed, fail, or eventually succeed via deferred
probe. Thus, the 'live' attribute may change from 0 to 1 asynchronously
without notice. So, editing key/offset/name while it's waiting for
deferred probe is prohibited.
The configfs auto-generation relies on create_default_group(), which
inherently prohibits rmdir(2). To align with the limitation, this commit
also prohibits mkdir(2) for them. When users want to change the number
of lines for an aggregator initialized via 'new_device', they need to
tear down the device using 'delete_device' and reconfigure it from
scratch. This does not break previous behavior; users of legacy sysfs
interface simply gain additional almost read-only configfs exposure.
Still, users can write to the 'live' attribute to toggle the device
unless it's waiting for deferred probe. So once probe succeeds, they can
deactivate it in the same manner as the devices initialized via
configfs.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250407043019.4105613-7-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Rename the local variable 'name' in gpio_aggregator_parse() to 'key'
because struct gpio_aggregator_line now uses the 'name' field for the
custom line name and the local variable actually represents a 'key'.
This change prepares for the next but one commit.
No functional change.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250407043019.4105613-6-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The existing sysfs 'new_device' interface has several limitations:
* No way to determine when GPIO aggregator creation is complete.
* No way to retrieve errors when creating a GPIO aggregator.
* No way to trace a GPIO line of an aggregator back to its
corresponding physical device.
* The 'new_device' echo does not indicate which virtual gpiochip<N>
was created.
* No way to assign names to GPIO lines exported through an aggregator.
Introduce the new configfs interface for gpio-aggregator to address
these limitations. It provides a more streamlined, modern, and
extensible configuration method. For backward compatibility, the
'new_device' interface and its behavior is retained for now.
This commit implements basic functionalities:
/config/gpio-aggregator/<name-of-your-choice>/
/config/gpio-aggregator/<name-of-your-choice>/live
/config/gpio-aggregator/<name-of-your-choice>/dev_name
/config/gpio-aggregator/<name-of-your-choice>/<lineY>/
/config/gpio-aggregator/<name-of-your-choice>/<lineY>/key
/config/gpio-aggregator/<name-of-your-choice>/<lineY>/offset
/config/gpio-aggregator/<name-of-your-choice>/<lineY>/name
Basic setup flow is:
1. Create a directory for a GPIO aggregator.
2. Create subdirectories for each line you want to instantiate.
3. In each line directory, configure the key and offset.
The key/offset semantics are as follows:
* If offset is >= 0:
- key specifies the name of the chip this GPIO belongs to
- offset specifies the line offset within that chip.
* If offset is <0:
- key needs to specify the GPIO line name.
4. Return to the aggregator's root directory and write '1' to the live
attribute.
For example, the command in the existing kernel doc:
echo 'e6052000.gpio 19 e6050000.gpio 20-21' > new_device
is equivalent to:
mkdir /sys/kernel/config/gpio-aggregator/<custom-name>
# Change <custom-name> to name of your choice (e.g. "aggr0")
cd /sys/kernel/config/gpio-aggregator/<custom-name>
mkdir line0 line1 line2 # Only "line<Y>" naming allowed.
echo e6052000.gpio > line0/key
echo 19 > line0/offset
echo e6050000.gpio > line1/key
echo 20 > line1/offset
echo e6050000.gpio > line2/key
echo 21 > line2/offset
echo 1 > live
The corresponding gpio_device id can be identified as follows:
cd /sys/kernel/config/gpio-aggregator/<custom-name>
ls -d /sys/devices/platform/`cat dev_name`/gpiochip*
Also, via configfs, custom GPIO line name can be set like this:
cd /sys/kernel/config/gpio-aggregator/<custom-name>
echo "abc" > line1/name
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250407043019.4105613-5-koichiro.den@canonical.com
[Bartosz: remove stray newlines]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Prepare for the upcoming configfs interface. These functions will be
used by both the existing sysfs interface and the new configfs
interface, reducing code duplication.
No functional change.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250407043019.4105613-4-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Unify function names to use gpio_aggregator_ prefix (except GPIO
forwarder implementations, which remain unchanged in subsequent
commits). While at it, rename the pre-existing gpio_aggregator_free() to
gpio_aggregator_destory(), since that name will be used by new
alloc/free functions introduced in the next commit, for which the name
is more appropriate.
No functional change.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250407043019.4105613-3-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reorder functions in drivers/gpio/gpio-aggregator.c to prepare for the
configfs-based interface additions in subsequent commits. Arrange the
code so that the configfs implementations will appear above the existing
sysfs-specific code, since the latter will partly depend on the configfs
interface implementations when it starts to expose the settings to
configfs.
The order in drivers/gpio/gpio-aggregator.c will be as follows:
* Basic gpio_aggregator/gpio_aggregator_line representations
* Common utility functions
* GPIO Forwarder implementations
* Configfs interface implementations
* Sysfs interface implementations
* Platform device implementations
* Module init/exit implementations
This separate commit ensures a clean diff for the subsequent commits.
No functional change.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250407043019.4105613-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpio: provide gpiod_is_equal()
-----BEGIN PGP SIGNATURE-----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=DTEb
-----END PGP SIGNATURE-----
Merge tag 'gpiod-is-equal-for-v6.16-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/brgl/linux into gpio/for-next
Immutable tag for the regulator tree to pull from
gpio: provide gpiod_is_equal()
There are users in the kernel that directly compare raw GPIO descriptor
pointers in order to determine whether they refer to the same physical
GPIO pin. This accidentally works like this but is not guaranteed by any
API contract. Let's provide a comparator function that hides the actual
logic.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250407-gpiod-is-equal-v1-1-7d85f568ae6e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpio irq which using three-cell scheme should always call
instance_match() function to find the correct irqdomain.
The select() function will be called with !DOMAIN_BUS_ANY,
so for specific gpio irq driver, it need to set bus token
explicitly, something like:
irq_domain_update_bus_token(girq->domain, DOMAIN_BUS_WIRED);
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250408-04-gpio-irq-threecell-v4-1-fd170d5e2d2b@gentoo.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The regulator comment in of_gpio_set_polarity_by_property()
made on top of a couple of the cases, while Atmel HSMCI quirk
is not related to that. Make it clear by moving Atmel HSMCI
quirk up out of the scope of the regulator comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250402122058.1517393-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The Ingenic NAND quirk has been added under CONFIG_LCD_HX8357 ifdeffery
which sounds quite wrong. Fix the choice for Ingenic NAND quirk
by wrapping it into own ifdeffery related to the respective driver.
Fixes: 3a7fd473bd ("mtd: rawnand: ingenic: move the GPIO quirk to gpiolib-of.c")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250402122058.1517393-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The GPIOD_FLAGS_BIT_NONEXCLUSIVE flag and devm_gpiod_unhinge() function
should be replaced with a better solution. The pwrseq subsystem is a good
candidate. GPIOs themselves should remain a unique resource. Add a task
for tracking the removal of these deprecated symbols.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250401-gpio-todo-remove-nonexclusive-v2-4-7c1380797b0d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This function was introduced as a workaround for an issue with resource
ownership in the regulator subsystem. Rather than passing the ownership
of a GPIO, we should make the regulator core be able to deal with
resources it didn't request. Deprecate this function so that we don't
get more users in the tree.
Link: https://lore.kernel.org/r/20250401-gpio-todo-remove-nonexclusive-v2-2-7c1380797b0d@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Blaize BLZP1600 GPIO controller is provided by VeriSilicon
Microelectronics based on the GPIO APB v0.2 design. It has 32
input/output ports which can be configured as edge or level
triggered interrupts. It also provides a de-bounce feature.
This controller is used on the Blaize BLZP1600 SoC.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@blaize.com>
Link: https://lore.kernel.org/r/20250327-kernel-upstreaming-add_gpio_support-v2-2-bbe51f8d66da@blaize.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This is prepare patch for switching s5m8767 regulator driver to
use GPIO descriptor. DTS for exynos5250 spring incorrectly specifies
"active low" polarity for the DVS and DS line. But per datasheet,
they are actually active high. So add polarity quirk for it.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250327004945.563765-1-peng.fan@oss.nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some drivers as well as the character device and sysfs code check
whether the line actually is in output mode before allowing the user to
set a value.
However, GPIO value setters now return integer values and can indicate
failures. This allows us to move these checks into the core code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250311-gpio-set-check-output-v1-1-d971bca9e6fa@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When the Tegra186 GPIO controller is probed through ACPI matching,
the driver emits two error messages during probing:
"tegra186-gpio NVDA0508:00: invalid resource (null)"
"tegra186-gpio NVDA0508:00: invalid resource (null)"
Fix this by getting resource first and then do the ioremap.
Fixes: 2606e7c9f5 ("gpio: tegra186: Add ACPI support")
Cc: stable@vger.kernel.org
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250327032349.78809-1-kanie@linux.alibaba.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
__acpi_find_gpio() calls two functions depending on the supplied con_id
and possibility to fallback to _CRS lookup. Those functions have the same
pieces of code that can be done only in one place. Do it so.
This gives an impressive shrink of the generated code for x86_64:
add/remove: 0/2 grow/shrink: 0/4 up/down: 0/-1204 (-1204)
Function old new delta
acpi_find_gpio.__UNIQUE_ID_ddebug478 56 - -56
acpi_dev_gpio_irq_wake_get_by.__UNIQUE_ID_ddebug480 56 - -56
acpi_find_gpio 354 216 -138
acpi_get_gpiod_by_index 456 307 -149
__acpi_find_gpio 877 638 -239
acpi_dev_gpio_irq_wake_get_by 695 129 -566
Total: Before=15358, After=14154, chg -7.84%
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250403160034.2680485-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some of the contents of struct acpi_gpio_lookup repeats what we have
in the struct acpi_gpio_params. Reuse the latter in the former.
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250403160034.2680485-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Rename par to params for better readability in acpi_get_driver_gpio_data().
No functional changes intended.
Requested-by: Bartosz Golaszewski <brgl@bgdev.pl>
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250403160034.2680485-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In all cases the supplied index is the same as the passed one in
the struct acpi_gpio_lookup. Remove index parameter and reuse one
from the struct acpi_gpio_lookup instead.
add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-14 (-14)
Function old new delta
acpi_get_gpiod_by_index 462 456 -6
acpi_gpio_property_lookup 425 417 -8
Total: Before=15375, After=15361, chg -0.09%
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250403160034.2680485-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The struct acpi_gpio_info has two boolean members that are located
not close to each other making two gaps due to alignment requirements.
Group them to improve memory footprint.
`pahole` difference before and after (on 32-bit):
- /* size: 36, cachelines: 1, members: 9 */
- /* sum members: 30, holes: 2, sum holes: 6 */
+ /* size: 32, cachelines: 1, members: 9 */
+ /* sum members: 30, holes: 1, sum holes: 2 */
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250403160034.2680485-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
It seems there really exists the need for a simple sysfs interface that
can be easily used from minimal initramfs images that don't contain much
more than busybox. However the current interface poses a challenge to
the removal of global GPIO numberspace. Add an item that tracks
extending the existing ABI with a per-chip export/unexport attribute
pair.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250321-gpio-todo-updates-v1-6-7b38f07110ee@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add an item tracking the treewide conversion of GPIO drivers to using
the new line value setter callbacks in struct gpio_chip instead of the
old ones that don't allow drivers to signal failures to callers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250321-gpio-todo-updates-v1-5-7b38f07110ee@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
While there are surely some arguments in favor of integrating the GPIO
and pinctrl subsystems into one, I believe this is not the right
approach.
The GPIO subsystem uses intricate locking with SRCU to handle the fact
that both consumers and providers may run in different contexts.
Pin-controller drivers are always meant to run in process context. This
alone is a huge obstacle to any attempt at integration as evident by
many problems we already encountered during the hotplug rework.
The current glue code is pretty minimal and for most part already allows
GPIO controllers to query pinctrl about the information they need.
I suggest to drop this task and keep the subsystems separate even if
many pin-controllers implement GPIO functionality in addition to pin
functions.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250321-gpio-todo-updates-v1-3-7b38f07110ee@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The removal of linux/gpio.h is already tracked by the item about
converting drivers to using the descriptor-based API. Remove the
duplicate.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250321-gpio-todo-updates-v1-2-7b38f07110ee@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad7 ("selftest: net: add proc_net_pktgen")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711ac ("selftests: net: Add test cases for link and peer netns")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429e ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2025-03-10
An update from ieee802154 for your *net-next* tree:
Andy Shevchenko reworked the ca8210 driver to use the gpiod API and fixed
a few problems of the driver along the way.
* tag 'ieee802154-for-net-next-2025-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next:
dt-bindings: ieee802154: ca8210: Update polarity of the reset pin
ieee802154: ca8210: Switch to using gpiod API
ieee802154: ca8210: Get platform data via dev_get_platdata()
ieee802154: ca8210: Use proper setters and getters for bitwise types
====================
Link: https://patch.msgid.link/20250310185752.2683890-1-stefan@datenfreihafen.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-11-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-5-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-4-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/20250310-gpiochip-set-conversion-v1-3-03798bb833eb@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
* A cleanup to remove unneeded ERR_CAST() in GPIO ACPI library
The following is an automated git shortlog grouped by driver:
gpiolib-acpi:
- Drop unneeded ERR_CAST() in __acpi_find_gpio()
-----BEGIN PGP SIGNATURE-----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=jUM9
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-next
intel-gpio for v6.15-1
* A cleanup to remove unneeded ERR_CAST() in GPIO ACPI library
The following is an automated git shortlog grouped by driver:
gpiolib-acpi:
- Drop unneeded ERR_CAST() in __acpi_find_gpio()
We use a notifier to implement the mechanism of informing the user-space
about changes in GPIO line status. We register with the notifier when
the GPIO character device file is opened and unregister when the last
reference to the associated file descriptor is dropped.
Since commit fcc8b637c5 ("gpiolib: switch the line state notifier to
atomic") we use the atomic notifier variant. Atomic notifiers call
rcu_synchronize in atomic_notifier_chain_unregister() which caused a
significant performance regression in some circumstances, observed by
user-space when calling close() on the GPIO device file descriptor.
Replace the atomic notifier with the raw variant and provide
synchronization with a read-write spinlock.
Fixes: fcc8b637c5 ("gpiolib: switch the line state notifier to atomic")
Reported-by: David Jander <david@protonic.nl>
Closes: https://lore.kernel.org/all/20250311110034.53959031@erd003.prtnl/
Tested-by: David Jander <david@protonic.nl>
Tested-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20250311-gpiolib-line-state-raw-notifier-v2-1-138374581e1e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
During chip registration we should neither check the return value of
gc->get_direction() nor hold the SRCU lock when calling it. The former
is because pin controllers may have pins set to alternate functions and
return errors from their get_direction() callbacks. That's alright - we
should default to the safe INPUT state and not bail-out. The latter is
not needed because we haven't registered the chip yet so there's nothing
to protect against dynamic removal. In fact: we currently hit a lockdep
splat. Revert to calling the gc->get_direction() callback directly and
*not* checking its value.
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/81f890fc-6688-42f0-9756-567efc8bb97a@samsung.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-1-c8dc57182441@linaro.org
Tested-by: Gene C <arch@sapience.com>
Link: https://lore.kernel.org/r/20250311175631.83779-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250303-gpiochip-set-conversion-v1-11-1d5cceeebf8b@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250303-gpiochip-set-conversion-v1-6-1d5cceeebf8b@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Link: https://lore.kernel.org/r/20250303-gpiochip-set-conversion-v1-5-1d5cceeebf8b@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This updates the driver to gpiod API, and removes yet another use of
of_get_named_gpio().
With this, invert the logic of the reset pin which is active-low
and add a quirk for the legacy and incorrect device tree descriptions.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250305105656.2133487-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
of_parse_phandle_with_fixed_args() requires its caller to
call into of_node_put() on the node pointer from the output
structure, but such a call is currently missing.
Call into of_node_put() to rectify that.
Fixes: 159f8a0209 ("gpio-rcar: Add DT support")
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250305163753.34913-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The valid_mask member of the struct gpio_chip is unconditionally written
by the GPIO core at driver registration. Current documentation does not
mention this but just says the valid_mask is used if it's not NULL. This
lured me to try populating it directly in the GPIO driver probe instead
of using the init_valid_mask() callback. It took some retries with
different bitmaps and eventually a bit of code-reading to understand why
the valid_mask was not obeyed. I could've avoided this trial and error if
the valid_mask was hidden in the struct gpio_device instead of being a
visible member of the struct gpio_chip.
Help the next developer who decides to directly populate the valid_mask
in struct gpio_chip by hiding the valid_mask in struct gpio_device and
keep it internal to the GPIO core.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/4547ca90d910d60cab3d56d864d59ddde47a5e93.1741180097.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The valid_mask member of the struct gpio_chip is unconditionally written
by the GPIO core at driver registration. It should not be directly
populated by the drivers. Hiding the valid_mask in struct gpio_device
makes it clear it is not meant to be directly populated by drivers. This
means drivers should not access it directly from the struct gpio_chip.
The gpio-rcar checks the valid mask in set/get_multiple() operations.
This is no longer needed [1]. Drop these checks.
Additionally, the valid_mask is needed for enabling the GPIO inputs at
probe time. Use the new valid_mask -getter function instead of accessing
it directly from the struct gpio_chip.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/e46441ba8a2840e6b48ec8d2ecd5919995a5675f.1741180097.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The valid_mask member of the struct gpio_chip is unconditionally written
by the GPIO core at driver registration. It shouldn't be directly
populated by drivers. This can be prevented by moving it from the struct
gpio_chip to struct gpio_device, which is internal to the GPIO core.
As a preparatory step, provide a getter function which can be used by
those drivers which need the valid_mask information.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/026f9d78502eca883bfe3faeb684e23d5d6c5e84.1741180097.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When GPIOs were requested the validity of GPIOs were checked only when
the GPIO-chip had the request -callback populated. This made using
masked GPIOs possible.
The GPIO chip driver authors may find it difficult to understand the
relation of enforsing the GPIO validity and the 'request' -callback
because the current documentation for the 'request' callback does not
mention this. It only states:
* @request: optional hook for chip-specific activation, such as
* enabling module power and clock; may sleep
The validity of the GPIO line should be checked whether the driver
provides the 'request' callback or not.
Unconditionally check the GPIO validity when GPIO is being requested.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/cd5e067b80e1bb590027bc3bfa817e7f794f21c3.1741180097.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Both new_device_store and delete_device_store touch module global
resources (e.g. gpio_aggregator_lock). To prevent race conditions with
module unload, a reference needs to be held.
Add try_module_get() in these handlers.
For new_device_store, this eliminates what appears to be the most dangerous
scenario: if an id is allocated from gpio_aggregator_idr but
platform_device_register has not yet been called or completed, a concurrent
module unload could fail to unregister/delete the device, leaving behind a
dangling platform device/GPIO forwarder. This can result in various issues.
The following simple reproducer demonstrates these problems:
#!/bin/bash
while :; do
# note: whether 'gpiochip0 0' exists or not does not matter.
echo 'gpiochip0 0' > /sys/bus/platform/drivers/gpio-aggregator/new_device
done &
while :; do
modprobe gpio-aggregator
modprobe -r gpio-aggregator
done &
wait
Starting with the following warning, several kinds of warnings will appear
and the system may become unstable:
------------[ cut here ]------------
list_del corruption, ffff888103e2e980->next is LIST_POISON1 (dead000000000100)
WARNING: CPU: 1 PID: 1327 at lib/list_debug.c:56 __list_del_entry_valid_or_report+0xa3/0x120
[...]
RIP: 0010:__list_del_entry_valid_or_report+0xa3/0x120
[...]
Call Trace:
<TASK>
? __list_del_entry_valid_or_report+0xa3/0x120
? __warn.cold+0x93/0xf2
? __list_del_entry_valid_or_report+0xa3/0x120
? report_bug+0xe6/0x170
? __irq_work_queue_local+0x39/0xe0
? handle_bug+0x58/0x90
? exc_invalid_op+0x13/0x60
? asm_exc_invalid_op+0x16/0x20
? __list_del_entry_valid_or_report+0xa3/0x120
gpiod_remove_lookup_table+0x22/0x60
new_device_store+0x315/0x350 [gpio_aggregator]
kernfs_fop_write_iter+0x137/0x1f0
vfs_write+0x262/0x430
ksys_write+0x60/0xd0
do_syscall_64+0x6c/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
</TASK>
---[ end trace 0000000000000000 ]---
Fixes: 828546e242 ("gpio: Add GPIO Aggregator")
Cc: stable@vger.kernel.org
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250224143134.3024598-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The Loongson-7A2000 and Loongson-3A6000 share the same gpio chip model.
Just add them through driver_data.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250303074552.3335186-2-zhoubinbin@loongson.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The checked type by PTR_ERR() is the same as returned by __acpi_find_gpio().
Hence there is no need to cast, drop it.
Acked-by: Mika Westerberg <westeri@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When describing GPIO controllers in the device tree, the ambition
of device tree to describe the hardware may require a three-cell
scheme:
gpios = <&gpio instance offset flags>;
This implements support for this scheme in the gpiolib OF core.
Drivers that want to handle multiple gpiochip instances from one
OF node need to implement a callback similar to this to
determine if a certain gpio chip is a pointer to the right
instance (pseudo-code):
struct my_gpio {
struct gpio_chip gcs[MAX_CHIPS];
};
static bool my_of_node_instance_match(struct gpio_chip *gc
unsigned int instance)
{
struct my_gpio *mg = gpiochip_get_data(gc);
if (instance >= MAX_CHIPS)
return false;
return (gc == &mg->gcs[instance]);
}
probe() {
struct my_gpio *mg;
struct gpio_chip *gc;
int i, ret;
for (i = 0; i++; i < MAX_CHIPS) {
gc = &mg->gcs[i];
/* This tells gpiolib we have several instances per node */
gc->of_gpio_n_cells = 3;
gc->of_node_instance_match = my_of_node_instance_match;
gc->base = -1;
...
ret = devm_gpiochip_add_data(dev, gc, mg);
if (ret)
return ret;
}
}
Rename the "simple" of_xlate function to "twocell" which is closer
to what it actually does.
In the device tree bindings, the provide node needs
to specify #gpio-cells = <3>; where the first cell is the instance
number:
gpios = <&gpio instance offset flags>;
Conversely ranges need to have four cells:
gpio-ranges = <&pinctrl instance gpio_offset pin_offset count>;
Reviewed-by: Alex Elder <elder@riscstar.com>
Tested-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250225-gpio-ranges-fourcell-v3-2-860382ba4713@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Instead of modifying the contents of the array of values read
in from a phandle, use local variables to store the values.
This makes the code easier to read and the array immutable.
Reviewed-by: Alex Elder <elder@riscstar.com>
Tested-by: Yixun Lan <dlan@gentoo.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250225-gpio-ranges-fourcell-v3-1-860382ba4713@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO drivers are not required to support set_multiple() - the core will
fallback to calling set() for each line if it's missing. Remove the
offending check from gpiochip_set_multiple().
Fixes: 98ce1eb1fd ("gpiolib: introduce gpio_chip setters that return values")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/ab3e42c0-70fa-48e0-ac93-ecbffef63507@samsung.com/
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250227152831.59784-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiod_direction_input_nonotify() function is supposed to return zero
if the direction for the pin is input. But instead it accidentally
returns GPIO_LINE_DIRECTION_IN (1) which will be cast into an ERR_PTR()
in gpiochip_request_own_desc(). The callers dereference it and it leads
to a crash.
I changed gpiod_direction_output_raw_commit() just for consistency but
returning GPIO_LINE_DIRECTION_OUT (0) is fine.
Cc: stable@vger.kernel.org
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/254f3925-3015-4c9d-aac5-bb9b4b2cd2c5@stanley.mountain
[Bartosz: moved the variable declarations to the top of the functions]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpiochip_get() is called only in two places: in gpio_chip_get_value()
and in gpiochip_get_multiple() where the existence of the gc->get()
callback is already checked. It makes sense to unduplicate the check by
moving it one level up the stack.
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Closes: https://lore.kernel.org/all/Z7yekJ8uRh8dphKn@black.fi.intel.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-3-c8dc57182441@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have existing macros for direction settings so we don't need to rely
on the magic value of 1 in the retval check. Use readable logic that
explicitly says we expect INPUT, OUTPUT or a negative errno and nothing
else in gpiochip_get_direction().
Fixes: e623c4303e ("gpiolib: sanitize the return value of gpio_chip::get_direction()")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Closes: https://lore.kernel.org/all/Z7yfTggRrk3K6srs@black.fi.intel.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-2-c8dc57182441@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
During chip registration we should neither check the return value of
gc->get_direction() nor hold the SRCU lock when calling it. The former
is because pin controllers may have pins set to alternate functions and
return errors from their get_direction() callbacks. That's alright - we
should default to the safe INPUT state and not bail-out. The latter is
not needed because we haven't registered the chip yet so there's nothing
to protect against dynamic removal. In fact: we currently hit a lockdep
splat. Revert to calling the gc->get_direction() callback directly and
*not* checking its value.
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Fixes: e623c4303e ("gpiolib: sanitize the return value of gpio_chip::get_direction()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/81f890fc-6688-42f0-9756-567efc8bb97a@samsung.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-1-c8dc57182441@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The PCA9670, PCA9671, PCA9672 and PCA9673 all have a RESETN input pin
that is used to reset the I2C GPIO expander.
One needs to hold this pin low for at least 4us and the reset should be
finished after about 100us according to the datasheet[1]. Once the reset
is done, the "registers and I2C-bus state machine will be held in their
default state until the RESET input is once again HIGH.".
Because the logic is reset, the latch values eventually provided in the
Device Tree via lines-initial-states property are inapplicable so they
are simply ignored if a reset GPIO is provided.
[1] https://www.nxp.com/docs/en/data-sheet/PCA9670.pdf 8.5 and fig 22.
Tested-by: Heiko Stuebner <heiko@sntech.de> # RK3588 Tiger Haikou Video Demo
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250224-pca976x-reset-driver-v3-2-58370ef405be@cherry.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has additional variants of the set(_multiple)
driver callbacks that return an integer to indicate success or failure.
Convert the driver to using them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-15-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has additional variants of the set(_multiple)
driver callbacks that return an integer to indicate success or failure.
Convert the driver to using them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-14-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has additional variants of the set(_multiple)
driver callbacks that return an integer to indicate success or failure.
Convert the driver to using them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-13-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Use lock guards from linux/cleanup.h. This will make the subsequent
commit that switches to using value returning GPIO line setters much
simpler as we'll be able to return values without caring about releasing
the locks.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-12-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has additional variants of the set(_multiple)
driver callbacks that return an integer to indicate success or failure.
Convert the driver to using them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-11-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has additional variants of the set(_multiple)
driver callbacks that return an integer to indicate success or failure.
Convert the driver to using them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-10-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has additional variants of the set(_multiple)
driver callbacks that return an integer to indicate success or failure.
Convert the driver to using them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-9-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has additional variants of the set(_multiple)
driver callbacks that return an integer to indicate success or failure.
Convert the driver to using them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-8-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has additional variants of the set(_multiple)
driver callbacks that return an integer to indicate success or failure.
Convert the driver to using them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-7-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
struct gpio_chip now has additional variants of the set(_multiple)
driver callbacks that return an integer to indicate success or failure.
Convert the driver to using them.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-6-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add new variants of the set() and set_multiple() callbacks that have
integer return values allowing to indicate failures to users of the GPIO
consumer API. Until we convert all GPIO providers treewide to using
them, they will live in parallel to the existing ones.
Make sure that providers cannot define both. Prefer the new ones and
only use the old ones as fallback.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-5-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make the existing wrapper around gpio_chip::set_multiple() consistent
with the one for gpio_chip::set(): make it return int, add a lockdep
assertion, warn on missing set callback and move the code a bit for
better readability.
Add return value checks in all call places.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-4-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have three places where we dereference the gpio_chip::set() callback.
In order to make it easier to incorporate the upcoming new variant of
this callback (one returning an integer value), wrap it in a helper so
that the dereferencing only happens once.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-3-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Change the in-kernel consumer interface for GPIOs: make all variants of
value setters that don't have a return value, return a signed integer
instead. That will allow these routines to indicate failures to callers.
This doesn't change the implementation just yet, we'll do it in
subsequent commits.
We need to update the gpio-latch module as it passes the address of
value setters as a function pointer argument and thus cares about its
type.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-2-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
After adding a pinctrl flag to gpio-mmio we can use it
for driving gpio-vf610.
The existing code has the same semantics and the generic
gpio-mmio, including reading from the data out register
when the direction is set to input, and it can also handle
the absence of the direction register better than the
current driver: we get the direction from the shadow
direction registers in gpio-mmio instead.
Since gpio-mmio has an internal spinlock we can drop the
direction-protecting spinlock from the driver.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Tested-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20250219-vf610-mmio-v3-2-588b64f0b689@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
It turns out that with this flag we can switch over an entire
driver to use gpio-mmio instead of a bunch of custom code,
also providing get/set_multiple() to it in the process, so it
seems like a reasonable feature to add.
The generic pin control backend requires us to call the
gpiochip_generic_request(), gpiochip_generic_free(),
pinctrl_gpio_direction_output() and pinctrl_gpio_direction_input()
callbacks, so if the new flag for a pin control back-end
is set, we make sure these functions get called as
expected.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250219-vf610-mmio-v3-1-588b64f0b689@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Update gpio-virtuser to use the new dev-sync-probe helper functions for
synchronized platform device creation, reducing code duplication.
No functional change.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250221133501.2203897-4-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Update gpio-sim to use the new dev-sync-probe helper functions for
synchronized platform device creation, reducing code duplication.
No functional change.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250221133501.2203897-3-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Both gpio-sim and gpio-virtuser share a mechanism to instantiate a
platform device, wait for probe completion, and retrieve the probe
success or error status synchronously. With gpio-aggregator planned to
adopt this approach for its configfs interface, it's time to factor
out the common code.
Add dev-sync-probe.[ch] to house helper functions used by all such
implementations.
No functional change.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250221133501.2203897-2-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For consistency with most other code that can access requested
descriptors: read the flags once atomically and then test individual
bits from the helper variable. This avoids any potential discrepancies
should flags change during the debug print.
Link: https://lore.kernel.org/r/20250215100847.30136-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract, the get_direction() callback can only
return 0, 1 or a negative error number. Add a wrapper around the callback
calls that filters out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-8-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the direction_input() callback may be propagated to
user-space. As per the API contract it can only return 0 or a negative
error number. Add a wrapper around the callback calls that filters out
anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-7-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the direction_output() callback may be propagated to
user-space. As per the API contract it can only return 0 or a negative
error number. Add a wrapper around the callback calls that filters out
anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-6-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract, the get_multiple() callback is only allowed to
return 0 or a negative error number. Filter out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-5-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract, the get() callback is only allowed to return 0,
1 or a negative error number. Add a wrapper around the callback calls
that filters out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-4-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the set_config() callback may be propagated to
user-space. If a bad driver returns a positive number, it may confuse
user programs. Tighten the API contract and check for positive numbers
returned by GPIO controllers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-3-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the request() callback may be propagated to
user-space. If a bad driver returns a positive number, it may confuse
user programs. Tighten the API contract and check for positive numbers
returned by GPIO controllers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-2-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into HEAD
Linux 6.14-rc4
GPIOLIB supports the case when number of supported GPIOs can be read
from the device property. Enable this for drivers that are using
GPIO regmap layer.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Move optional assignments down in the code, so they may use some values
from the (updated) struct gpio_chip later on.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Group ngpio_per_reg, reg_stride, and reg_mask_xlate assignments together
with the respective conditional for better understanding what's going on
in the code.
While at it, mark ngpio_per_reg as (Optional) in the kernel-doc
in accordance with what code actually does.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiochip_get_ngpios() can be used in the cases where passed device
is not a provider of the certain property. Use fwnode instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since commit 9d846b1aeb ("gpiolib: check the return value of
gpio_chip::get_direction()") we check the return value of the
get_direction() callback as per its API contract. Some drivers have been
observed to fail to register now as they may call get_direction() in
gpiochip_add_data() in contexts where it has always silently failed.
Until we audit all drivers, replace the bail-out to a kernel log
warning.
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/Z7VFB1nST6lbmBIo@finisterre.sirena.org.uk/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/dfe03f88-407e-4ef1-ad30-42db53bbd4e4@samsung.com/
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250219144356.258635-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Hardware timestamping is only used on tegra186 platforms but we include
the code and export the symbols everywhere. Shrink the binary a bit by
compiling the relevant functions conditionally.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250217103922.151047-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
During the locking rework in GPIOLIB, we omitted one important use-case,
namely: setting and getting values for GPIO descriptor arrays with
array_info present.
This patch does two things: first it makes struct gpio_array store the
address of the underlying GPIO device and not chip. Next: it protects
the chip with SRCU from removal in gpiod_get_array_value_complex() and
gpiod_set_array_value_complex().
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250215095655.23152-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The GPIO library will parse the respective property to fill ngpio.
No need to repeat it in the driver.
While at it, drop unused fwnode field.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250213184833.3109038-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make the code a bit more readable by using a helper variable to store
the address of pdev->dev in probe().
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250211120847.42437-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Replace calls to OF-specific interface with generic device property
getters. This is good practice and also drops implicit run-time
dependency on CONFIG_OF.
Link: https://lore.kernel.org/r/20250211120847.42437-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add locking to `vf610_gpio_direction_input|output()` functions. Without
this locking, a race condition exists between concurrent calls to these
functions, potentially leading to incorrect GPIO direction settings.
To verify the correctness of this fix, a `trylock` patch was applied,
where after a couple of reboots the race was confirmed. I.e., one user
had to wait before acquiring the lock. With this patch the race has not
been encountered. It's worth mentioning that any type of debugging
(printing, tracing, etc.) would "resolve"/hide the issue.
Fixes: 659d8a6231 ("gpio: vf610: add imx7ulp support")
Signed-off-by: Johan Korsnes <johan.korsnes@remarkable.no>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250217091643.679644-1-johan.korsnes@remarkable.no
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract - gpio_chip::get_direction() may fail and return
a negative error number. However, we treat it as if it always returned 0
or 1. Check the return value of the callback and propagate the error
number up the stack.
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-1-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiochip_get_ngpios() uses chip_*() macros to print messages.
However these macros rely on gpiodev to be initialised and set,
which is not the case when called via bgpio_init(). In such a case
the printing messages will crash on NULL pointer dereference.
Replace chip_*() macros by the respective dev_*() ones to avoid
such crash.
Fixes: 55b2395e4e ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Relatively recently bitmap APIs were expanded by introduction of
bitmap_read() and bitmap_write(). These APIs are generic ones
that may replace custom functions in this driver, i.e. xgpio_get_value32()
and xgpio_set_value32(). Do replace them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250205093200.373709-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
There are bitmap_gather() and bitmap_scatter() that are factually
simplified version of the APIs used in the driver. Use them where
appropriate.
While at it, replace bitmap_bitremap() with find_nth_bit()
for the sake of simplification.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250205093200.373709-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Deduplicate gpiod_direction_input_nonotify() call in
gpiod_direction_output_nonotify() when emulating open-drain
or open-source behaviour. It also aligns the error check
approaches in set_output_value and set_output_flag labels.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250204175646.150577-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The stmpe_reg_read function can fail, but its return value is not checked
in stmpe_gpio_irq_sync_unlock. This can lead to silent failures and
incorrect behavior if the hardware access fails.
This patch adds checks for the return value of stmpe_reg_read. If the
function fails, an error message is logged and the function returns
early to avoid further issues.
Fixes: b888fb6f2a ("gpio: stmpe: i2c transfer are forbiden in atomic context")
Cc: stable@vger.kernel.org # 4.16+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250212021849.275-1-vulab@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reduce verbosity by using gpiod_multi_set_value_cansleep() instead of
gpiod_set_array_value_cansleep().
Also add max3191x_ namespace prefix to the driver's helper function
since we are changing the function signature anyway.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250210-gpio-set-array-helper-v3-6-d6a673674da8@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Spurious immediate wake up events are reported on Acer Nitro ANV14. GPIO 11 is
specified as an edge triggered input and also a wake source but this pin is
supposed to be an output pin for an LED, so it's effectively floating.
Block the interrupt from getting set up for this GPIO on this device.
Cc: stable@vger.kernel.org
Reported-by: Delgan <delgan.py@gmail.com>
Tested-by: Delgan <delgan.py@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3954
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Mika Westerberg <westeri@kernel.org>
Link: https://lore.kernel.org/r/20250211203222.761206-1-superm1@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add a missing newline to the format string of the "Couldn't get IRQ
for bank..." error message.
Fixes: 757651e3d6 ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-3-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The settings for all GPIOs are locked by default in bcm_kona_gpio_reset.
The settings for a GPIO are unlocked when requesting it as a GPIO, but
not when requesting it as an interrupt, causing the IRQ settings to not
get applied.
Fix this by making sure to unlock the right bits when an IRQ is requested.
To avoid a situation where an IRQ being released causes a lock despite
the same GPIO being used by a GPIO request or vice versa, add an unlock
counter and only lock if it reaches 0.
Fixes: 757651e3d6 ("gpio: bcm281xx: Add GPIO driver")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-2-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The GPIO lock/unlock functions clear/write a bit to the relevant
register for each bank. However, due to an oversight the bit that
was being written was based on the total GPIO number, not the index
of the GPIO within the relevant bank, causing it to fail for any
GPIO above 32 (thus any GPIO for banks above bank 0).
Fix lock/unlock for these banks by using the correct bit.
Fixes: bdb93c03c5 ("gpio: bcm281xx: Centralize register locking")
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250206-kona-gpio-fixes-v2-1-409135eab780@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The one of previous changes modified the library code to use
helpers from string_choices.h. Nevertheless it misses more
opportunities to convert the code. Here is the second part
of the conversion.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250205112936.575493-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have a temporary variable to keep a pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250207151825.2122419-8-andriy.shevchenko@linux.intel.com
[Bartosz: finish the job by converting three more instances]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
