commit 74abd086d2 ("gpiolib: sanitize the return value of
gpio_chip::get_multiple()") altered the value returned by
gc->get_multiple() in case it is positive (> 0), but failed to return
for other cases (<= 0).
This may result in the "if (gc->get)" block being executed and thus
negates the performance gain that is normally obtained by using
gc->get_multiple().
Fix by returning the result of gc->get_multiple() if it is <= 0.
Also move the "ret" variable to the scope where it is used, which as an
added bonus fixes an indentation error introduced by the aforementioned
commit.
Fixes: 74abd086d2 ("gpiolib: sanitize the return value of gpio_chip::get_multiple()")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20250703191829.2952986-1-hugo@hugovil.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where applicable
which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which will
take off the burden from GPIO drivers of checking this down the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter callbacks
- convert more drivers to making the irq_chip immutable as is recommended
by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built with
COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that makes
the setup easier for user-space than the existing driver-level sysfs
attributes and also adds more advanced configuration features (such as
referring to aggregated lines by their original names or modifying
their names as exposed by the aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the global
GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new
drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates
-----BEGIN PGP SIGNATURE-----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=PQqp
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
On Qualcomm platforms if the board uses GPIO hogs msm_pinmux_request()
calls gpiochip_line_is_valid(). After commit 8015443e24 ("gpio: Hide
valid_mask from direct assignments") gpiochip_line_is_valid() uses
gc->gpiodev, which is NULL when GPIO hog pins are being processed.
Thus after this commit using GPIO hogs causes the following crash. In
order to fix this, verify that gc->gpiodev is not NULL.
Note: it is not possible to reorder calls (e.g. by calling
msm_gpio_init() before pinctrl registration or by splitting
pinctrl_register() into _and_init() and pinctrl_enable() and calling the
latter function after msm_gpio_init()) because GPIO chip registration
would fail with EPROBE_DEFER if pinctrl is not enabled at the time of
registration.
pc : gpiochip_line_is_valid+0x4/0x28
lr : msm_pinmux_request+0x24/0x40
sp : ffff8000808eb870
x29: ffff8000808eb870 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff726240f9d040 x24: 0000000000000000
x23: ffff7262438c0510 x22: 0000000000000080 x21: ffff726243ea7000
x20: ffffab13f2c4e698 x19: 0000000000000080 x18: 00000000ffffffff
x17: ffff726242ba6000 x16: 0000000000000100 x15: 0000000000000028
x14: 0000000000000000 x13: 0000000000002948 x12: 0000000000000003
x11: 0000000000000078 x10: 0000000000002948 x9 : ffffab13f50eb5e8
x8 : 0000000003ecb21b x7 : 000000000000002d x6 : 0000000000000b68
x5 : 0000007fffffffff x4 : ffffab13f52f84a8 x3 : ffff8000808eb804
x2 : ffffab13f1de8190 x1 : 0000000000000080 x0 : 0000000000000000
Call trace:
gpiochip_line_is_valid+0x4/0x28 (P)
pin_request+0x208/0x2c0
pinmux_enable_setting+0xa0/0x2e0
pinctrl_commit_state+0x150/0x26c
pinctrl_enable+0x6c/0x2a4
pinctrl_register+0x3c/0xb0
devm_pinctrl_register+0x58/0xa0
msm_pinctrl_probe+0x2a8/0x584
sdm845_pinctrl_probe+0x20/0x88
platform_probe+0x68/0xc0
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x5e8
worker_thread+0x1b4/0x35c
kthread+0x144/0x220
ret_from_fork+0x10/0x20
Code: b5fffba0 17fffff2 9432ec27 f9400400 (f9428800)
Fixes: 8015443e24 ("gpio: Hide valid_mask from direct assignments")
Reported-by: Doug Anderson <dianders@chromium.org>
Closes: https://lore.kernel.org/r/CAD=FV=Vg8_ZOLgLoC4WhFPzhVsxXFC19NrF38W6cW_W_3nFjbw@mail.gmail.com
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-1-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In some functions the returned variable is assigned to 0 and then
reassigned to the actual value. Remove redundant assignments.
In one case make it more clear that the assignment is not needed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-9-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There are two variables for the same used in the gpiod_to_irq().
Replace the second by reusing the function top-level one.
While at it, refactor the branch to have less lines of code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Call validate_desc() directly when VALIDATE_DESC() can't be used.
It will print additional information useful for debugging.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Move validate_desc() and Co upper in the code to be able to use
in the further changes.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
No need to double check the pointer for NULL since gpiod_free()
is using VALIDATE_DESC_VOID() which simply returns in that case.
This reverts commit 1d7765ba15.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Print the actual error when descriptor contains an error pointer.
This might help debugging those rare cases.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The driver uses guard()()/scoped_guard() for the rest of the synchronisation
calls. Convert to use the same for gpio_machine_hogs_mutex.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
There are two ways to take a lock: plain call to the mutex_lock()
or using guard()() / scoped_guard(). The driver inconsistently uses
both. Make taking gpio_lookup_lock consistent.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250416095645.2027695-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The gpiod_direction_output_raw_commit() function checks if any setter
callback is present before doing anything. As the new GPIO setters with
return values were introduced, make this check also succeed if one is
present.
Fixes: 98ce1eb1fd ("gpiolib: introduce gpio_chip setters that return values")
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250411-mdb-gpiolib-setters-fix-v2-1-9611280d8822@bootlin.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
gpio: provide gpiod_is_equal()
-----BEGIN PGP SIGNATURE-----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=DTEb
-----END PGP SIGNATURE-----
Merge tag 'gpiod-is-equal-for-v6.16-rc1' of gitolite.kernel.org:pub/scm/linux/kernel/git/brgl/linux into gpio/for-next
Immutable tag for the regulator tree to pull from
gpio: provide gpiod_is_equal()
There are users in the kernel that directly compare raw GPIO descriptor
pointers in order to determine whether they refer to the same physical
GPIO pin. This accidentally works like this but is not guaranteed by any
API contract. Let's provide a comparator function that hides the actual
logic.
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250407-gpiod-is-equal-v1-1-7d85f568ae6e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpio irq which using three-cell scheme should always call
instance_match() function to find the correct irqdomain.
The select() function will be called with !DOMAIN_BUS_ANY,
so for specific gpio irq driver, it need to set bus token
explicitly, something like:
irq_domain_update_bus_token(girq->domain, DOMAIN_BUS_WIRED);
Signed-off-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250408-04-gpio-irq-threecell-v4-1-fd170d5e2d2b@gentoo.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some drivers as well as the character device and sysfs code check
whether the line actually is in output mode before allowing the user to
set a value.
However, GPIO value setters now return integer values and can indicate
failures. This allows us to move these checks into the core code.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250311-gpio-set-check-output-v1-1-d971bca9e6fa@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We use a notifier to implement the mechanism of informing the user-space
about changes in GPIO line status. We register with the notifier when
the GPIO character device file is opened and unregister when the last
reference to the associated file descriptor is dropped.
Since commit fcc8b637c5 ("gpiolib: switch the line state notifier to
atomic") we use the atomic notifier variant. Atomic notifiers call
rcu_synchronize in atomic_notifier_chain_unregister() which caused a
significant performance regression in some circumstances, observed by
user-space when calling close() on the GPIO device file descriptor.
Replace the atomic notifier with the raw variant and provide
synchronization with a read-write spinlock.
Fixes: fcc8b637c5 ("gpiolib: switch the line state notifier to atomic")
Reported-by: David Jander <david@protonic.nl>
Closes: https://lore.kernel.org/all/20250311110034.53959031@erd003.prtnl/
Tested-by: David Jander <david@protonic.nl>
Tested-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20250311-gpiolib-line-state-raw-notifier-v2-1-138374581e1e@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
During chip registration we should neither check the return value of
gc->get_direction() nor hold the SRCU lock when calling it. The former
is because pin controllers may have pins set to alternate functions and
return errors from their get_direction() callbacks. That's alright - we
should default to the safe INPUT state and not bail-out. The latter is
not needed because we haven't registered the chip yet so there's nothing
to protect against dynamic removal. In fact: we currently hit a lockdep
splat. Revert to calling the gc->get_direction() callback directly and
*not* checking its value.
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/81f890fc-6688-42f0-9756-567efc8bb97a@samsung.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-1-c8dc57182441@linaro.org
Tested-by: Gene C <arch@sapience.com>
Link: https://lore.kernel.org/r/20250311175631.83779-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The valid_mask member of the struct gpio_chip is unconditionally written
by the GPIO core at driver registration. Current documentation does not
mention this but just says the valid_mask is used if it's not NULL. This
lured me to try populating it directly in the GPIO driver probe instead
of using the init_valid_mask() callback. It took some retries with
different bitmaps and eventually a bit of code-reading to understand why
the valid_mask was not obeyed. I could've avoided this trial and error if
the valid_mask was hidden in the struct gpio_device instead of being a
visible member of the struct gpio_chip.
Help the next developer who decides to directly populate the valid_mask
in struct gpio_chip by hiding the valid_mask in struct gpio_device and
keep it internal to the GPIO core.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/4547ca90d910d60cab3d56d864d59ddde47a5e93.1741180097.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The valid_mask member of the struct gpio_chip is unconditionally written
by the GPIO core at driver registration. It shouldn't be directly
populated by drivers. This can be prevented by moving it from the struct
gpio_chip to struct gpio_device, which is internal to the GPIO core.
As a preparatory step, provide a getter function which can be used by
those drivers which need the valid_mask information.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/026f9d78502eca883bfe3faeb684e23d5d6c5e84.1741180097.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
When GPIOs were requested the validity of GPIOs were checked only when
the GPIO-chip had the request -callback populated. This made using
masked GPIOs possible.
The GPIO chip driver authors may find it difficult to understand the
relation of enforsing the GPIO validity and the 'request' -callback
because the current documentation for the 'request' callback does not
mention this. It only states:
* @request: optional hook for chip-specific activation, such as
* enabling module power and clock; may sleep
The validity of the GPIO line should be checked whether the driver
provides the 'request' callback or not.
Unconditionally check the GPIO validity when GPIO is being requested.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/cd5e067b80e1bb590027bc3bfa817e7f794f21c3.1741180097.git.mazziesaccount@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
GPIO drivers are not required to support set_multiple() - the core will
fallback to calling set() for each line if it's missing. Remove the
offending check from gpiochip_set_multiple().
Fixes: 98ce1eb1fd ("gpiolib: introduce gpio_chip setters that return values")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/ab3e42c0-70fa-48e0-ac93-ecbffef63507@samsung.com/
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250227152831.59784-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiod_direction_input_nonotify() function is supposed to return zero
if the direction for the pin is input. But instead it accidentally
returns GPIO_LINE_DIRECTION_IN (1) which will be cast into an ERR_PTR()
in gpiochip_request_own_desc(). The callers dereference it and it leads
to a crash.
I changed gpiod_direction_output_raw_commit() just for consistency but
returning GPIO_LINE_DIRECTION_OUT (0) is fine.
Cc: stable@vger.kernel.org
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/254f3925-3015-4c9d-aac5-bb9b4b2cd2c5@stanley.mountain
[Bartosz: moved the variable declarations to the top of the functions]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
gpiochip_get() is called only in two places: in gpio_chip_get_value()
and in gpiochip_get_multiple() where the existence of the gc->get()
callback is already checked. It makes sense to unduplicate the check by
moving it one level up the stack.
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Closes: https://lore.kernel.org/all/Z7yekJ8uRh8dphKn@black.fi.intel.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-3-c8dc57182441@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have existing macros for direction settings so we don't need to rely
on the magic value of 1 in the retval check. Use readable logic that
explicitly says we expect INPUT, OUTPUT or a negative errno and nothing
else in gpiochip_get_direction().
Fixes: e623c4303e ("gpiolib: sanitize the return value of gpio_chip::get_direction()")
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Closes: https://lore.kernel.org/all/Z7yfTggRrk3K6srs@black.fi.intel.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-2-c8dc57182441@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
During chip registration we should neither check the return value of
gc->get_direction() nor hold the SRCU lock when calling it. The former
is because pin controllers may have pins set to alternate functions and
return errors from their get_direction() callbacks. That's alright - we
should default to the safe INPUT state and not bail-out. The latter is
not needed because we haven't registered the chip yet so there's nothing
to protect against dynamic removal. In fact: we currently hit a lockdep
splat. Revert to calling the gc->get_direction() callback directly and
*not* checking its value.
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Fixes: e623c4303e ("gpiolib: sanitize the return value of gpio_chip::get_direction()")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/81f890fc-6688-42f0-9756-567efc8bb97a@samsung.com/
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250226-retval-fixes-v2-1-c8dc57182441@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add new variants of the set() and set_multiple() callbacks that have
integer return values allowing to indicate failures to users of the GPIO
consumer API. Until we convert all GPIO providers treewide to using
them, they will live in parallel to the existing ones.
Make sure that providers cannot define both. Prefer the new ones and
only use the old ones as fallback.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-5-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Make the existing wrapper around gpio_chip::set_multiple() consistent
with the one for gpio_chip::set(): make it return int, add a lockdep
assertion, warn on missing set callback and move the code a bit for
better readability.
Add return value checks in all call places.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-4-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
We have three places where we dereference the gpio_chip::set() callback.
In order to make it easier to incorporate the upcoming new variant of
this callback (one returning an integer value), wrap it in a helper so
that the dereferencing only happens once.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-3-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Change the in-kernel consumer interface for GPIOs: make all variants of
value setters that don't have a return value, return a signed integer
instead. That will allow these routines to indicate failures to callers.
This doesn't change the implementation just yet, we'll do it in
subsequent commits.
We need to update the gpio-latch module as it passes the address of
value setters as a function pointer argument and thus cares about its
type.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250220-gpio-set-retval-v2-2-bc4cfd38dae3@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
For consistency with most other code that can access requested
descriptors: read the flags once atomically and then test individual
bits from the helper variable. This avoids any potential discrepancies
should flags change during the debug print.
Link: https://lore.kernel.org/r/20250215100847.30136-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract, the get_direction() callback can only
return 0, 1 or a negative error number. Add a wrapper around the callback
calls that filters out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-8-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the direction_input() callback may be propagated to
user-space. As per the API contract it can only return 0 or a negative
error number. Add a wrapper around the callback calls that filters out
anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-7-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the direction_output() callback may be propagated to
user-space. As per the API contract it can only return 0 or a negative
error number. Add a wrapper around the callback calls that filters out
anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-6-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract, the get_multiple() callback is only allowed to
return 0 or a negative error number. Filter out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-5-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract, the get() callback is only allowed to return 0,
1 or a negative error number. Add a wrapper around the callback calls
that filters out anything else.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-4-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the set_config() callback may be propagated to
user-space. If a bad driver returns a positive number, it may confuse
user programs. Tighten the API contract and check for positive numbers
returned by GPIO controllers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-3-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The return value of the request() callback may be propagated to
user-space. If a bad driver returns a positive number, it may confuse
user programs. Tighten the API contract and check for positive numbers
returned by GPIO controllers.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-2-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAme7hfkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGU+IH/1bk6zIvAwXXS5yu
KNsQ8dEkC3Xme6HqLtPsAhRLF+5YJf6MaGm1ip5dDMyIvasa2gwvCQQQoOpeMbKj
79VKT+m9t3szMHZaQYjlOuYHBmNSJ4cMCD2Qh6ktXHGPfTTWDFGf7fBwBOkVNeJU
1Ask+bxeop21aJMhfYXrUta3OYyerLBUR6jCiCM82A/GLtdv6oNGXBu3ygDt9Tjx
ZHSl+CYjKpmGUP8JnMKwCBHVguEfqgzZ//dY1H16AvOLed9k2jkMFn8O5Vi3vjnx
TWMMXoiJimuamGzbjxtCCqzxNlFFDT4gRpDqeJxb16W/gDTFmbRr9LDjNehCZe33
AigLZ6M=
=Y/7F
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into HEAD
Linux 6.14-rc4
The gpiochip_get_ngpios() can be used in the cases where passed device
is not a provider of the certain property. Use fwnode instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250213195621.3133406-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Since commit 9d846b1aeb ("gpiolib: check the return value of
gpio_chip::get_direction()") we check the return value of the
get_direction() callback as per its API contract. Some drivers have been
observed to fail to register now as they may call get_direction() in
gpiochip_add_data() in contexts where it has always silently failed.
Until we audit all drivers, replace the bail-out to a kernel log
warning.
Fixes: 9d846b1aeb ("gpiolib: check the return value of gpio_chip::get_direction()")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/Z7VFB1nST6lbmBIo@finisterre.sirena.org.uk/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/all/dfe03f88-407e-4ef1-ad30-42db53bbd4e4@samsung.com/
Tested-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20250219144356.258635-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Hardware timestamping is only used on tegra186 platforms but we include
the code and export the symbols everywhere. Shrink the binary a bit by
compiling the relevant functions conditionally.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250217103922.151047-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
During the locking rework in GPIOLIB, we omitted one important use-case,
namely: setting and getting values for GPIO descriptor arrays with
array_info present.
This patch does two things: first it makes struct gpio_array store the
address of the underlying GPIO device and not chip. Next: it protects
the chip with SRCU from removal in gpiod_get_array_value_complex() and
gpiod_set_array_value_complex().
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250215095655.23152-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
As per the API contract - gpio_chip::get_direction() may fail and return
a negative error number. However, we treat it as if it always returned 0
or 1. Check the return value of the callback and propagate the error
number up the stack.
Cc: stable@vger.kernel.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250210-gpio-sanitize-retvals-v1-1-12ea88506cb2@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The gpiochip_get_ngpios() uses chip_*() macros to print messages.
However these macros rely on gpiodev to be initialised and set,
which is not the case when called via bgpio_init(). In such a case
the printing messages will crash on NULL pointer dereference.
Replace chip_*() macros by the respective dev_*() ones to avoid
such crash.
Fixes: 55b2395e4e ("gpio: mmio: handle "ngpios" properly in bgpio_init()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250213155646.2882324-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
