Add CXL RAS Features support. Features include "patrol scrub control",
"error check scrub", "perform maintenance", and "memory sparing". This
support connects the RAS Featurs to EDAC.
Add following changes to function get_support_feature_info()
1. Make generic to share between cxl-fwctl and cxl-edac paths.
2. Rename get_support_feature_info() to cxl_feature_info()
3. Change parameter const struct fwctl_rpc_cxl *rpc_in to
const uuid_t *uuid.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250521124749.817-3-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Smatch complains that %pa is for phys_addr_t types and "size" is a u64.
drivers/cxl/core/hdm.c:521 cxl_dpa_alloc() error: '%pa' expects
argument of type 'phys_addr_t*', argument 4 has type 'ullong*
Looking at this, to me it seems more useful to print the sizes as
decimal instead of hex. Let's do that.
[dj: Adjusted based on latest code changes. ]
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/3d3d969d-651d-4e9d-a892-900876a60ab5@moroto.mountain
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Per Table 8-2 in CXL r3.2 section 8.1.1 and CXL r3.2 section 8.1.6, only
CXL Downstream switch ports and CXL root ports have GPF DVSEC for CXL
Port(DVSEC ID 04h).
CXL subsystem has a gpf_dvsec in struct cxl_port which is used to cache
the offset of a GPF DVSEC in PCIe configuration space. It will be
updated during the first EP attaching to the cxl_port, so the gpf_dvsec
can only cache the GPF DVSEC offset of the dport which the first EP is
under. Will not have chance to update it during other EPs attaching.
That means CXL subsystem will use the same GPF DVSEC offset for all
dports under the port, it will be a problem if the GPF DVSEC offset
cached in cxl_port is not the right offset for a dport.
Moving gpf_dvsec from struct cxl_port to struct cxl_dport, make every
cxl dport has their own GPF DVSEC offset caching, and each cxl dport
uses its own GPF DVSEC offset for GPF DVSEC accessing.
Fixes: a52b6a2c1c ("cxl/pci: Support Global Persistent Flush (GPF)")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20250323093110.233040-2-ming.li@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add CXL Features support. Setup code for enabling in kernel usage of CXL
Features. Expecting EDAC/RAS to utilize CXL Features in kernel for
things such as memory sparing. Also prepartion for enabling of CXL FWCTL
support to issue allowed Features from user space.
Add support for GPF flows. It is found that the CXL specification
around this to be a bit too involved from the driver side. And while
this should really all handled by the hardware, this patch takes
things with a grain of salt.
Upon respective port enumeration, both phase timeouts are set to
a max of 20 seconds, which is the NMI watchdog default for lockup
detection. The premise is that the kernel does not have enough
information to set anything better than a max across the board
and hope devices finish their GPF flows within the platform energy
budget.
Timeout detection is based on dirty Shutdown semantics. The driver
will mark it as dirty, expecting that the device clear it upon a
successful GPF event. The admin may consult the device Health and
check the dirty shutdown counter to see if there was a problem
with data integrity.
[ davej: Explicitly set return to 0 in update_gpf_port_dvsec() ]
[ davej: Add spec reference for 'struct cxl_mbox_set_shutdown_state_in ]
[ davej: Fix 0-day reported issue ]
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250124233533.910535-1-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When PCIe AER is in FW-First, OS should process CXL Protocol errors from
CPER records. Introduce support for handling and logging CXL Protocol
errors.
The defined trace events cxl_aer_uncorrectable_error and
cxl_aer_correctable_error trace native CXL AER endpoint errors. Reuse them
to trace FW-First Protocol errors.
Since the CXL code is required to be called from process context and
GHES is in interrupt context, use workqueues for processing.
Similar to CXL CPER event handling, use kfifo to handle errors as it
simplifies queue processing by providing lock free fifo operations.
Add the ability for the CXL sub-system to register a workqueue to
process CXL CPER protocol errors.
[DJ: return cxl_cper_register_prot_err_work() directly in cxl_ras_init()]
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250310223839.31342-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The current cxl region size only indicates the size of the CXL memory
region without accounting for the extended linear cache size. Retrieve the
cache size from HMAT and append that to the cxl region size for the cxl
region range that matches the SRAT range that has extended linear cache
enabled.
The SRAT defines the whole memory range that includes the extended linear
cache and the CXL memory region. The new HMAT ECN/ECR to the Memory Side
Cache Information Structure defines the size of the extended linear cache
size and matches to the SRAT Memory Affinity Structure by the memory
proxmity domain. Add a helper to match the cxl range to the SRAT memory
range in order to retrieve the cache size.
There are several places that checks the cxl region range against the
decoder range. Use new helper to check between the two ranges and address
the new cache size.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250226162224.3633792-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add support for SET_FEATURE mailbox command.
CXL spec r3.2 section 8.2.9.6 describes optional device specific features.
CXL devices supports features with changeable attributes.
The settings of a feature can be optionally modified using Set Feature
command.
CXL spec r3.2 section 8.2.9.6.3 describes Set Feature command.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250220194438.2281088-6-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add support for GET_FEATURE mailbox command.
CXL spec r3.2 section 8.2.9.6 describes optional device specific features.
The settings of a feature can be retrieved using Get Feature command.
CXL spec r3.2 section 8.2.9.6.2 describes Get Feature command.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250220194438.2281088-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
With 'struct cxl_mailbox' context introduced, the helper functions
cxl_query_cmd() and cxl_send_cmd() can take a cxl_mailbox directly
rather than a cxl_memdev parameter. Refactor to use cxl_mailbox
directly.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250204220430.4146187-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Now that the operational mode of DPA capacity (ram vs pmem... etc) is
tracked in the partition, and no code paths have dependencies on the
mode implying the partition index, the ambiguous 'enum cxl_decoder_mode'
can be cleaned up, specifically this ambiguity on whether the operation
mode implied anything about the partition order.
Endpoint decoders simply reference their assigned partition where the
operational mode can be retrieved as partition mode.
With this in place PMEM can now be partition0 which happens today when
the RAM capacity size is zero. Dynamic RAM can appear above PMEM when
DCD arrives, etc. Code sequences that hard coded the "PMEM after RAM"
assumption can now just iterate partitions and consult the partition
mode after the fact.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864306972.668823.3327008645125276726.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add rcd_pcie_cap and its initialization to cache the offset of cxl1.1
device link status information. By caching it, avoid the walking
memory map area to find the offset when output the register value.
Given that this solution involves port lookups via cxl_pci_find_port()
and multiple exit paths where that reference needs to be dropped,
introduce a new put_cxl_root() scope-based-free handler.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Kobayashi,Daisuke <kobayashi.da-06@fujitsu.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20241002011549.408412-2-kobayashi.da-06@fujitsu.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The current bandwidth calculation aggregates all the targets. This simple
method does not take into account where multiple targets sharing under
a switch or a root port where the aggregated bandwidth can be greater than
the upstream link of the switch.
To accurately account for the shared upstream uplink cases, a new update
function is introduced by walking from the leaves to the root of the
hierarchy and clamp the bandwidth in the process as needed. This process
is done when all the targets for a region are present but before the
final values are send to the HMAT handling code cached access_coordinate
targets.
The original perf calculation path was kept to calculate the latency
performance data that does not require the shared link consideration.
The shared upstream link calculation is done as a second pass when all
the endpoints have arrived.
Testing is done via qemu with CXL hierarchy. run_qemu[1] is modified to
support several CXL hierarchy layouts. The following layouts are tested:
HB: Host Bridge
RP: Root Port
SW: Switch
EP: End Point
2 HB 2 RP 2 EP: resulting bandwidth: 624
1 HB 2 RP 2 EP: resulting bandwidth: 624
2 HB 2 RP 2 SW 4 EP: resulting bandwidth: 624
Current testing, perf number from SRAT/HMAT is hacked into the kernel
code. However with new QEMU support of Generic Target Port that's
incoming, the perf data injection is no longer needed.
[1]: https://github.com/pmem/run_qemu
Suggested-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://lore.kernel.org/linux-cxl/20240501152503.00002e60@Huawei.com/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20240904001316.1688225-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Although cxl_trace_hpa() is used to populate TRACE EVENTs with HPA
addresses the work it performs is a DPA to HPA translation not a
trace. Tidy up this naming by moving the minimal work done in
cxl_trace_hpa() into cxl_dpa_to_hpa() and use cxl_dpa_to_hpa()
for trace event callbacks.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://patch.msgid.link/452a9b0c525b774c72d9d5851515ffa928750132.1719980933.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This work belongs in the region driver as it is only useful with
CONFIG_CXL_REGION. Add a stub in core.h for when the region driver
is not built.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/183222631f11a43c5e6debc42ec22fe1bd4b818a.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This helper belongs in the region driver as it is only useful
with CONFIG_CXL_REGION. Add a stub in core.h for when the region
driver is not built.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/05e30f788d62b3dd398aff2d2ea50a6aaa7c3313.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
For the numa nodes that are not created by SRAT, no memory_target is
allocated and is not managed by the HMAT_REPORTING code. Therefore
hmat_callback() memory hotplug notifier will exit early on those NUMA
nodes. The CXL memory hotplug notifier will need to call
node_set_perf_attrs() directly in order to setup the access sysfs
attributes.
In acpi_numa_init(), the last proximity domain (pxm) id created by SRAT is
stored. Add a helper function acpi_node_backed_by_real_pxm() in order to
check if a NUMA node id is defined by SRAT or created by CFMWS.
node_set_perf_attrs() symbol is exported to allow update of perf attribs
for a node. The sysfs path of
/sys/devices/system/node/nodeX/access0/initiators/* is created by
node_set_perf_attrs() for the various attributes where nodeX is matched
to the NUMA node of the CXL region.
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-13-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When the CXL region is formed, the driver computes the performance data
for the region. However this data is not available at the node data
collection that has been populated by the HMAT during kernel
initialization. Add a memory hotplug notifier to update the access
coordinates to the 'struct memory_target' context kept by the
HMAT_REPORTING code.
Add CXL_CALLBACK_PRI for a memory hotplug callback priority. Set the
priority number to be called before HMAT_CALLBACK_PRI. The CXL update must
happen before hmat_callback().
A new HMAT_REPORTING helper hmat_update_target_coordinates() is added in
order to allow CXL to update the memory_target access coordinates.
A new ext_updated member is added to the memory_target to indicate that
the access coordinates within the memory_target has been updated by an
external agent such as CXL. This prevents data being overwritten by the
hmat_update_target_attrs() triggered by hmat_callback().
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Reviewed-by: Huang, Ying <ying.huang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240308220055.2172956-12-dave.jiang@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The latency is calculated by dividing the flit size over the bandwidth. Add
support to retrieve the flit size for the CXL switch device and calculate
the latency of the PCIe link. Cache the latency number with cxl_dport.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170319621931.2212653.6800240203604822886.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Restricted CXL Host (RCH) Error Handling undoes the topology munging of
CXL 1.1 to enabled some AER recovery, and lands some base infrastructure
for handling Root-Complex-Event-Collectors (RCECs) with CXL. Include
this long running series finally for v6.7.
Restricted CXL host (RCH) downstream port AER information is not currently
logged while in the error state. One problem preventing the error logging
is the AER and RAS registers are not accessible. The CXL driver requires
changes to find RCH downstream port AER and RAS registers for purpose of
error logging.
RCH downstream ports are not enumerated during a PCI bus scan and are
instead discovered using system firmware, ACPI in this case.[1] The
downstream port is implemented as a Root Complex Register Block (RCRB).
The RCRB is a 4k memory block containing PCIe registers based on the PCIe
root port.[2] The RCRB includes AER extended capability registers used for
reporting errors. Note, the RCH's AER Capability is located in the RCRB
memory space instead of PCI configuration space, thus its register access
is different. Existing kernel PCIe AER functions can not be used to manage
the downstream port AER capabilities and RAS registers because the port was
not enumerated during PCI scan and the registers are not PCI config
accessible.
Discover RCH downstream port AER extended capability registers. Use MMIO
accesses to search for extended AER capability in RCRB register space.
[1] CXL 3.0 Spec, 9.11.2 - System Firmware View of CXL 1.1 Hierarchy
[2] CXL 3.0 Spec, 8.2.1.1 - RCH Downstream Port RCRB
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231018171713.1883517-12-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The sanitize operation is destructive and the expectation is that the
device is unmapped while in progress. The current implementation does a
lockless check for decoders being active, but then does nothing to
prevent decoders from racing to be committed. Introduce state tracking
to resolve this race.
This incidentally cleans up unpriveleged userspace from triggering mmio
read cycles by spinning on reading the 'security/state' attribute. Which
at a minimum is a waste since the kernel state machine can cache the
completion result.
Lastly cxl_mem_sanitize() was mistakenly marked EXPORT_SYMBOL() in the
original implementation, but an export was never required.
Fixes: 0c36b6ad43 ("cxl/mbox: Add sanitization handling machinery")
Cc: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pick up the first half of the RCH error handling series. The back half
needs some fixups for test regressions. Small conflicts with the PMU
work around register enumeration and setup helpers.
Prepare cxl_probe_rcrb() for retrieving more than just the component
register block. The RCH AER handling code wants to get back to the AER
capability that happens to be MMIO mapped rather then configuration
cycles.
Move RCRB specific downstream port data, like the RCRB base and the
AER capability offset, into its own data structure ('struct
cxl_rcrb_info') for cxl_probe_rcrb() to fill. Extend 'struct
cxl_dport' to include a 'struct cxl_rcrb_info' attribute.
This centralizes all RCRB scanning in one routine.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-4-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The RCRB is extracted already during ACPI CEDT table parsing while the
data of this is needed not earlier than dport creation. This
implementation comes with drawbacks: During ACPI table scan there is
already MMIO access including mapping and unmapping, but only ACPI
data should be collected here. The collected data must be transferred
through a couple of interfaces until it is finally consumed when
creating the dport. This causes complex data structures and function
interfaces. Additionally, RCRB parsing will be extended to also
extract AER data, it would be much easier do this at a later point
during port and dport creation when the data structures are available
to hold that data.
To simplify all that, probe the RCRB at a later point during RCH
downstream port creation. Change ACPI table parser to only extract the
base address of either the component registers or the RCRB. Parse and
extract the RCRB in devm_cxl_add_rch_dport().
This is in preparation to centralize all RCRB scanning.
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230622205523.85375-2-terry.bowman@amd.com
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/20230622205523.85375-3-terry.bowman@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL PMU devices can be found from entries in the Register
Locator DVSEC.
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20230526095824.16336-4-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The cxl_poison trace event allows users to view the history of poison
list reads. With the addition of inject and clear poison capabilities,
users will expect similar tracing.
Add trace types 'Inject' and 'Clear' to the cxl_poison trace_event and
trace successful operations only.
If the driver finds that the DPA being injected or cleared of poison
is mapped in a region, that region info is included in the cxl_poison
trace event. Region reconfigurations can make this extra info useless
if the debug operations are not carefully managed.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/e20eb7c3029137b480ece671998c183da0477e2e.1681874357.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
User space may need to know which region, if any, maps the poison
address(es) logged in a cxl_poison trace event. Since the mapping
of DPAs (device physical addresses) to a region can change, the
kernel must provide this information at the time the poison list
is read. The event informs user space that at event <timestamp>
this <region> mapped to this <DPA>, which is poisoned.
The cxl_poison trace event is already wired up to log the region
name and uuid if it receives param 'struct cxl_region'.
In order to provide that cxl_region, add another method for gathering
poison - by committed endpoint decoder mappings. This method is only
available with CONFIG_CXL_REGION and is only used if a region actually
maps the memdev where poison is being read. After the region driver
reads the poison list for all the mapped resources, poison is read for
any remaining unmapped resources.
The default method remains: read the poison by memdev resource.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/438b01ccaa70592539e8eda4eb2b1d617ba03160.1681838292.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL devices may support the retrieval of a device poison list.
Add a new trace event that the CXL subsystem may use to log
the media-error records returned in the poison list.
Log each media-error record as a cxl_poison trace event of
type 'List'.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/de6196f5269483d886ab1834744f82d27189a666.1681838291.git.alison.schofield@intel.com
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
While platform firmware takes some responsibility for mapping the RAM
capacity of CXL devices present at boot, the OS is responsible for
mapping the remainder and hot-added devices. Platform firmware is also
responsible for identifying the platform general purpose memory pool,
typically DDR attached DRAM, and arranging for the remainder to be 'Soft
Reserved'. That reservation allows the CXL subsystem to route the memory
to core-mm via memory-hotplug (dax_kmem), or leave it for dedicated
access (device-dax).
The new 'struct cxl_dax_region' object allows for a CXL memory resource
(region) to be published, but also allow for udev and module policy to
act on that event. It also prevents cxl_core.ko from having a module
loading dependency on any drivers/dax/ modules.
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/167602003896.1924368.10335442077318970468.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Take two endpoints attached to the first switch on the first host-bridge
in the cxl_test topology and define a pre-initialized region. This is a
x2 interleave underneath a x1 CXL Window.
$ modprobe cxl_test
$ # cxl list -Ru
{
"region":"region3",
"resource":"0xf010000000",
"size":"512.00 MiB (536.87 MB)",
"interleave_ways":2,
"interleave_granularity":4096,
"decode_state":"commit"
}
Tested-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/167602000547.1924368.11613151863880268868.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Expand the region creation infrastructure to enable 'ram'
(volatile-memory) regions. The internals of create_pmem_region_store()
and create_pmem_region_show() are factored out into helpers
__create_region() and __create_region_show() for the 'ram' case to
reuse.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/167601995775.1924368.352616146815830591.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
tl;dr: Clean up an unnecessary export and enable cxl_test.
An RCD (Restricted CXL Device), in contrast to a typical CXL device in
a VH topology, obtains its component registers from the bottom half of
the associated CXL host bridge RCRB (Root Complex Register Block). In
turn this means that cxl_rcrb_to_component() needs to be called from
devm_cxl_add_endpoint().
Presently devm_cxl_add_endpoint() is part of the CXL core, but the only
user is the CXL mem module. Move it from cxl_core to cxl_mem to not only
get rid of an unnecessary export, but to also enable its call out to
cxl_rcrb_to_component(), in a subsequent patch, to be mocked by
cxl_test. Recall that cxl_test can only mock exported symbols, and since
cxl_rcrb_to_component() is itself inside the core, all callers must be
outside of cxl_core to allow cxl_test to mock it.
Reviewed-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/166993045072.1882361.13944923741276843683.stgit@dwillia2-xfh.jf.intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The LIBNVDIMM subsystem is a platform agnostic representation of system
NVDIMM / persistent memory resources. To date, the CXL subsystem's
interaction with LIBNVDIMM has been to register an nvdimm-bridge device
and cxl_nvdimm objects to proxy CXL capabilities into existing LIBNVDIMM
subsystem mechanics.
With regions the approach is the same. Create a new cxl_pmem_region
object to proxy CXL region details into a LIBNVDIMM definition. With
this enabling LIBNVDIMM can partition CXL persistent memory regions with
legacy namespace labels. A follow-on patch will add CXL region label and
CXL namespace label support to persist region configurations across
driver reload / system-reset events.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784340111.1758207.3036498385188290968.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The CXL region driver is responsible for routing fully formed CXL
regions to one of libnvdimm, for persistent memory regions, device-dax
for volatile memory regions, or just act as an enumeration placeholder
if the region was setup and configuration locked by platform firmware.
In the platform-firmware-setup case the expectation is that region is
already accounted in the system memory map, i.e. already enabled as
"System RAM".
For now, just attach to CXL regions in the CXL_CONFIG_COMMIT state, and
take no further action.
Given this driver is just a small / simple router, include it in the
core rather than its own module.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20220624041950.559155-18-dan.j.williams@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Once the region's interleave geometry (ways, granularity, size) is
established and all the endpoint decoder targets are assigned, the next
phase is to program all the intermediate decoders. Specifically, each
CXL switch in the path between the endpoint and its CXL host-bridge
(including the logical switch internal to the host-bridge) needs to have
its decoders programmed and the target list order assigned.
The difficulty in this implementation lies in determining which endpoint
decoder ordering combinations are valid. Consider the cxl_test case of 2
host bridges, each of those host-bridges attached to 2 switches, and
each of those switches attached to 2 endpoints for a potential 8-way
interleave. The x2 interleave at the host-bridge level requires that all
even numbered endpoint decoder positions be located on the "left" hand
side of the topology tree, and the odd numbered positions on the other.
The endpoints that are peers on the same switch need to have a position
that can be routed with a dedicated address bit per-endpoint. See
check_last_peer() for the details.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784337827.1758207.132121746122685208.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL regions (interleave sets) are made up of a set of memory devices
where each device maps a portion of the interleave with one of its
decoders (see CXL 2.0 8.2.5.12 CXL HDM Decoder Capability Structure).
As endpoint decoders are identified by a provisioning tool they can be
added to a region provided the region interleave properties are set
(way, granularity, HPA) and DPA has been assigned to the decoder.
The attach event triggers several validation checks, for example:
- is the DPA sized appropriately for the region
- is the decoder reachable via the host-bridges identified by the
region's root decoder
- is the device already active in a different region position slot
- are there already regions with a higher HPA active on a given port
(per CXL 2.0 8.2.5.12.20 Committing Decoder Programming)
...and the attach event affords an opportunity to collect data and
resources relevant to later programming the target lists in switch
decoders, for example:
- allocate a decoder at each cxl_port in the decode chain
- for a given switch port, how many the region's endpoints are hosted
through the port
- how many unique targets (next hops) does a port need to map to reach
those endpoints
The act of reconciling this information and deploying it to the decoder
configuration is saved for a follow-on patch.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784337277.1758207.4108508181328528703.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The region provisioning process involves allocating DPA to a set of
endpoint decoders, and HPA plus the region geometry to a region device.
Then the decoder is assigned to the region. At this point several
validation steps can be performed to validate that the decoder is
suitable to participate in the region.
Co-developed-by: Ben Widawsky <bwidawsk@kernel.org>
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/165784336184.1758207.16403282029203949622.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL 2.0 allows for dynamic provisioning of new memory regions (system
physical address resources like "System RAM" and "Persistent Memory").
Whereas DDR and PMEM resources are conveyed statically at boot, CXL
allows for assembling and instantiating new regions from the available
capacity of CXL memory expanders in the system.
Sysfs with an "echo $region_name > $create_region_attribute" interface
is chosen as the mechanism to initiate the provisioning process. This
was chosen over ioctl() and netlink() to keep the configuration
interface entirely in a pseudo-fs interface, and it was chosen over
configfs since, aside from this one creation event, the interface is
read-mostly. I.e. configfs supports cases where an object is designed to
be provisioned each boot, like an iSCSI storage target, and CXL region
creation is mostly for PMEM regions which are created usually once
per-lifetime of a server instance. This is an improvement over nvdimm
that pre-created "seed" devices that tended to confuse users looking to
determine which devices are active and which are idle.
Recall that the major change that CXL brings over previous persistent
memory architectures is the ability to dynamically define new regions.
Compare that to drivers like 'nfit' where the region configuration is
statically defined by platform firmware.
Regions are created as a child of a root decoder that encompasses an
address space with constraints. When created through sysfs, the root
decoder is explicit. When created from an LSA's region structure a root
decoder will possibly need to be inferred by the driver.
Upon region creation through sysfs, a vacant region is created with a
unique name. Regions have a number of attributes that must be configured
before the region can be bound to the driver where HDM decoder program
is completed.
An example of creating a new region:
- Allocate a new region name:
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
- Create a new region by name:
while
region=$(cat /sys/bus/cxl/devices/decoder0.0/create_pmem_region)
! echo $region > /sys/bus/cxl/devices/decoder0.0/create_pmem_region
do true; done
- Region now exists in sysfs:
stat -t /sys/bus/cxl/devices/decoder0.0/$region
- Delete the region, and name:
echo $region > /sys/bus/cxl/devices/decoder0.0/delete_region
Signed-off-by: Ben Widawsky <bwidawsk@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784333909.1758207.794374602146306032.stgit@dwillia2-xfh.jf.intel.com
[djbw: simplify locking, reword changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The region provisioning flow will roughly follow a sequence of:
1/ Allocate DPA to a set of decoders
2/ Allocate HPA to a region
3/ Associate decoders with a region and validate that the DPA allocations
and topologies match the parameters of the region.
For now, this change (step 1) arranges for DPA capacity to be allocated
and deleted from non-committed decoders based on the decoder's mode /
partition selection. Capacity is allocated from the lowest DPA in the
partition and any 'pmem' allocation blocks out all remaining ram
capacity in its 'skip' setting. DPA allocations are enforced in decoder
instance order. I.e. decoder N + 1 always starts at a higher DPA than
instance N, and deleting allocations must proceed from the
highest-instance allocated decoder to the lowest.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165784329399.1758207.16732038126938632700.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In preparation for a new cxl debugfs file, move 'cxl' directory
establishment and teardown to the core and let subsequent init routines
reference that setup.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/165603884654.551046.4962104601691723080.stgit@dwillia2-xfh
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Unlike the decoder enumeration for "root decoders" described by platform
firmware, standard decoders can be enumerated from the component
registers space once the base address has been identified (via PCI,
ACPI, or another mechanism).
Add common infrastructure for HDM (Host-managed-Device-Memory) Decoder
enumeration and share it between host-bridge, upstream switch port, and
cxl_test defined decoders.
The locking model for switch level decoders is to hold the port lock
over the enumeration. This facilitates moving the dport and decoder
enumeration to a 'port' driver. For now, the only enumerator of decoder
resources is the cxl_acpi root driver.
Co-developed-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/164374688404.395335.9239248252443123526.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The kbuild robot reports:
drivers/cxl/core/bus.c:516:1: warning: stack frame size (1032) exceeds
limit (1024) in function 'devm_cxl_add_decoder'
It is also the case the devm_cxl_add_decoder() is unwieldy to use for
all the different decoder types. Fix the stack usage by splitting the
creation into alloc and add steps. This also allows for context
specific construction before adding.
With the split the caller is responsible for registering a devm callback
to trigger device_unregister() for the decoder rather than it being
implicit in the decoder registration. I.e. the routine that calls alloc
is responsible for calling put_device() if the "add" operation fails.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ben Widawsky <ben.widawsky@intel.com>
Link: https://lore.kernel.org/r/163225205828.3038145.6831131648369404859.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that the internals of mailbox operations are abstracted from the PCI
specifics a bulk of infrastructure can move to the core.
The CXL_PMEM driver intends to proxy LIBNVDIMM UAPI and driver requests
to the equivalent functionality provided by the CXL hardware mailbox
interface. In support of that intent move the mailbox implementation to
a shared location for the CXL_PCI driver native IOCTL path and CXL_PMEM
nvdimm command proxy path to share.
A unit test framework seeks to implement a unit test backend transport
for mailbox commands to communicate mocked up payloads. It can reuse all
of the mailbox infrastructure minus the PCI specifics, so that also gets
moved to the core.
Finally with the mailbox infrastructure and ioctl handling being
transport generic there is no longer any need to pass file
file_operations to devm_cxl_add_memdev(). That allows all the ioctl
boilerplate to move into the core for unit test reuse.
No functional change intended, just code movement.
Acked-by: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/163116435233.2460985.16197340449713287180.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The motivation for moving cxl_memdev allocation to the core (beyond
better file organization of sysfs attributes in core/ and drivers in
cxl/), is that device lifetime is longer than module lifetime. The cxl_pci
module should be free to come and go without needing to coordinate with
devices that need the text associated with cxl_memdev_release() to stay
resident. The move fixes a use after free bug when looping driver
load / unload with CONFIG_DEBUG_KOBJECT_RELEASE=y.
Another motivation for disconnecting cxl_memdev creation from cxl_pci is
to enable other drivers, like a unit test driver, to registers memdevs.
Fixes: b39cb1052a ("cxl/mem: Register CXL memX devices")
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162792540495.368511.9748638751088219595.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Refactor the pmem / nvdimm-bridge functionality from core/bus.c to
core/pmem.c. Introduce drivers/core/core.h to communicate data
structures and helpers between the core bus and other functionality that
registers devices on the bus.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162792538899.368511.3881663908293411300.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
