mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-03-22 23:46:49 +08:00
78eb4ea25cd5fdbdae7eb9fdf87b99195ff67508
42158 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
7a3fad30fd |
Merge tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator updates from Jason Donenfeld: "This adds getrandom() support to the vDSO. First, it adds a new kind of mapping to mmap(2), MAP_DROPPABLE, which lets the kernel zero out pages anytime under memory pressure, which enables allocating memory that never gets swapped to disk but also doesn't count as being mlocked. Then, the vDSO implementation of getrandom() is introduced in a generic manner and hooked into random.c. Next, this is implemented on x86. (Also, though it's not ready for this pull, somebody has begun an arm64 implementation already) Finally, two vDSO selftests are added. There are also two housekeeping cleanup commits" * tag 'random-6.11-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: MAINTAINERS: add random.h headers to RNG subsection random: note that RNDGETPOOL was removed in 2.6.9-rc2 selftests/vDSO: add tests for vgetrandom x86: vdso: Wire up getrandom() vDSO implementation random: introduce generic vDSO getrandom() implementation mm: add MAP_DROPPABLE for designating always lazily freeable mappings |
||
|
Linus Torvalds
|
d1e9a63dcd |
Merge tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"VFS:
- The new 64bit mount ids start after the old mount id, i.e., at the
first non-32 bit value. However, we started counting one id too
late and thus lost 4294967296 as the first valid id. Fix that.
- Update a few comments on some vfs_*() creation helpers.
- Move copying of the xattr name out from the locks required to start
a filesystem write.
- Extend the filelock lock UAF fix to the compat code as well.
- Now that we added the ability to look up an inode under RCU it's
possible that lockless hash lookup can find and lock an inode after
it gets I_FREEING set. It then waits until inode teardown in
evict() is finished.
The flag however is still set after evict() has woken up all
waiters. If the inode lock is taken late enough on the waiting side
after hash removal and wakeup happened the waiting thread will
never be woken.
Before RCU based lookup this was synchronized via the
inode_hash_lock. But since unhashing requires the inode lock as
well we can check whether the inode is unhashed while holding inode
lock even without holding inode_hash_lock.
pidfd:
- The nsproxy structure contains nearly all of the namespaces
associated with a task. When a namespace type isn't supported
nsproxy might contain a NULL pointer or always point to the initial
namespace type. The logic isn't consistent. So when deriving
namespace fds we need to ensure that the namespace type is
supported.
First, so that we don't risk dereferncing NULL pointers. The
correct bigger fix would be to change all namespaces to always set
a valid namespace pointer in struct nsproxy independent of whether
or not it is compiled in. But that requires quite a few changes.
Second, so that we don't allow deriving namespace fds when the
namespace type doesn't exist and thus when they couldn't also be
derived via /proc/self/ns/.
- Add missing selftests for the new pidfd ioctls to derive namespace
fds. This simply extends the already existing testsuite.
netfs:
- Fix debug logging and fix kconfig variable name so it actually
works.
- Fix writeback that goes both to the server and cache. The streams
are only activated once a subreq is added. When a server write
happens the subreq doesn't need to have finished by the time the
cache write is started. If the server write has already finished by
the time the cache write is about to start the cache write will
operate on a folio that might already have been reused. Fix this by
preactivating the cache write.
- Limit cachefiles subreq size for cache writes to MAX_RW_COUNT"
* tag 'vfs-6.11-rc1.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
inode: clarify what's locked
vfs: Fix potential circular locking through setxattr() and removexattr()
filelock: Fix fcntl/close race recovery compat path
fs: use all available ids
cachefiles: Set the max subreq size for cache writes to MAX_RW_COUNT
netfs: Fix writeback that needs to go to both server and cache
pidfs: add selftests for new namespace ioctls
pidfs: handle kernels without namespaces cleanly
pidfs: when time ns disabled add check for ioctl
vfs: correct the comments of vfs_*() helpers
vfs: handle __wait_on_freeing_inode() and evict() race
netfs: Rename CONFIG_FSCACHE_DEBUG to CONFIG_NETFS_DEBUG
netfs: Revert "netfs: Switch debug logging to pr_debug()"
|
||
Christian Brauner
|
1bb8dce5df |
pidfs: add selftests for new namespace ioctls
Add selftests to verify that deriving namespace file descriptors from pidfd file descriptors works correctly. Link: https://lore.kernel.org/r/20240722-work-pidfs-69dbea91edab@brauner Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Linus Torvalds
|
786c8248db |
Merge tag 'perf-tools-fixes-for-v6.11-2024-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Two fixes for building perf and other tools:
- Fix breakage in tracing tools due to pkg-config for
libtrace{event,fs}
- Fix build of perf when libunwind is used"
* tag 'perf-tools-fixes-for-v6.11-2024-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf dso: Fix build when libunwind is enabled
tools/latency: Use pkg-config in lib_setup of Makefile.config
tools/rtla: Use pkg-config in lib_setup of Makefile.config
tools/verification: Use pkg-config in lib_setup of Makefile.config
tools: Make pkg-config dependency checks usable by other tools
perf build: Warn if libtracefs is not found
|
||
|
Linus Torvalds
|
ca83c61cb3 |
Merge tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada: - Remove tristate choice support from Kconfig - Stop using the PROVIDE() directive in the linker script - Reduce the number of links for the combination of CONFIG_KALLSYMS and CONFIG_DEBUG_INFO_BTF - Enable the warning for symbol reference to .exit.* sections by default - Fix warnings in RPM package builds - Improve scripts/make_fit.py to generate a FIT image with separate base DTB and overlays - Improve choice value calculation in Kconfig - Fix conditional prompt behavior in choice in Kconfig - Remove support for the uncommon EMAIL environment variable in Debian package builds - Remove support for the uncommon "name <email>" form for the DEBEMAIL environment variable - Raise the minimum supported GNU Make version to 4.0 - Remove stale code for the absolute kallsyms - Move header files commonly used for host programs to scripts/include/ - Introduce the pacman-pkg target to generate a pacman package used in Arch Linux - Clean up Kconfig * tag 'kbuild-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (65 commits) kbuild: doc: gcc to CC change kallsyms: change sym_entry::percpu_absolute to bool type kallsyms: unify seq and start_pos fields of struct sym_entry kallsyms: add more original symbol type/name in comment lines kallsyms: use \t instead of a tab in printf() kallsyms: avoid repeated calculation of array size for markers kbuild: add script and target to generate pacman package modpost: use generic macros for hash table implementation kbuild: move some helper headers from scripts/kconfig/ to scripts/include/ Makefile: add comment to discourage tools/* addition for kernel builds kbuild: clean up scripts/remove-stale-files kconfig: recursive checks drop file/lineno kbuild: rpm-pkg: introduce a simple changelog section for kernel.spec kallsyms: get rid of code for absolute kallsyms kbuild: Create INSTALL_PATH directory if it does not exist kbuild: Abort make on install failures kconfig: remove 'e1' and 'e2' macros from expression deduplication kconfig: remove SYMBOL_CHOICEVAL flag kconfig: add const qualifiers to several function arguments kconfig: call expr_eliminate_yn() at least once in expr_eliminate_dups() ... |
||
|
Linus Torvalds
|
d2d721e2eb |
Merge tag 'livepatching-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching update from Petr Mladek: - show patch->replace flag in sysfs - add or improve few selftests * tag 'livepatching-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: livepatch: Replace snprintf() with sysfs_emit() selftests/livepatch: Add selftests for "replace" sysfs attribute livepatch: Add "replace" sysfs attribute selftests: livepatch: Test atomic replace against multiple modules selftests/livepatch: define max test-syscall processes |
||
Petr Mladek
|
ea5377ec49 | Merge branch 'for-6.11/sysfs-patch-replace' into for-linus | ||
|
Linus Torvalds
|
527eff227d |
Merge tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton: - In the series "treewide: Refactor heap related implementation", Kuan-Wei Chiu has significantly reworked the min_heap library code and has taught bcachefs to use the new more generic implementation. - Yury Norov's series "Cleanup cpumask.h inclusion in core headers" reworks the cpumask and nodemask headers to make things generally more rational. - Kuan-Wei Chiu has sent along some maintenance work against our sorting library code in the series "lib/sort: Optimizations and cleanups". - More library maintainance work from Christophe Jaillet in the series "Remove usage of the deprecated ida_simple_xx() API". - Ryusuke Konishi continues with the nilfs2 fixes and clanups in the series "nilfs2: eliminate the call to inode_attach_wb()". - Kuan-Ying Lee has some fixes to the gdb scripts in the series "Fix GDB command error". - Plus the usual shower of singleton patches all over the place. Please see the relevant changelogs for details. * tag 'mm-nonmm-stable-2024-07-21-15-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (98 commits) ia64: scrub ia64 from poison.h watchdog/perf: properly initialize the turbo mode timestamp and rearm counter tsacct: replace strncpy() with strscpy() lib/bch.c: use swap() to improve code test_bpf: convert comma to semicolon init/modpost: conditionally check section mismatch to __meminit* init: remove unused __MEMINIT* macros nilfs2: Constify struct kobj_type nilfs2: avoid undefined behavior in nilfs_cnt32_ge macro math: rational: add missing MODULE_DESCRIPTION() macro lib/zlib: add missing MODULE_DESCRIPTION() macro fs: ufs: add MODULE_DESCRIPTION() lib/rbtree.c: fix the example typo ocfs2: add bounds checking to ocfs2_check_dir_entry() fs: add kernel-doc comments to ocfs2_prepare_orphan_dir() coredump: simplify zap_process() selftests/fpu: add missing MODULE_DESCRIPTION() macro compiler.h: simplify data_race() macro build-id: require program headers to be right after ELF header resource: add missing MODULE_DESCRIPTION() ... |
||
|
Linus Torvalds
|
fbc90c042c |
Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
||
|
Linus Torvalds
|
2c9b351240 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit
|
||
|
Linus Torvalds
|
13a7871541 |
Merge tag 'libnvdimm-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny: - One small cleanup to use sizeof(*pointer) - Add MODULE_DESCRIPTIONS() to eliminate make W=1 warnings * tag 'libnvdimm-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: testing: nvdimm: Add MODULE_DESCRIPTION() macros testing: nvdimm: iomap: add MODULE_DESCRIPTION() dax: add missing MODULE_DESCRIPTION() macros nvdimm: add missing MODULE_DESCRIPTION() macros ACPI: NFIT: add missing MODULE_DESCRIPTION() macro nvdimm/btt: use sizeof(*pointer) instead of sizeof(type) |
||
|
Linus Torvalds
|
f557af081d |
Merge tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various new ISA extensions:
* The Zve32[xf] and Zve64[xfd] sub-extensios of the vector
extension
* Zimop and Zcmop for may-be-operations
* The Zca, Zcf, Zcd and Zcb sub-extensions of the C extension
* Zawrs
- riscv,cpu-intc is now dtschema
- A handful of performance improvements and cleanups to text patching
- Support for memory hot{,un}plug
- The highest user-allocatable virtual address is now visible in
hwprobe
* tag 'riscv-for-linus-6.11-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (58 commits)
riscv: lib: relax assembly constraints in hweight
riscv: set trap vector earlier
KVM: riscv: selftests: Add Zawrs extension to get-reg-list test
KVM: riscv: Support guest wrs.nto
riscv: hwprobe: export Zawrs ISA extension
riscv: Add Zawrs support for spinlocks
dt-bindings: riscv: Add Zawrs ISA extension description
riscv: Provide a definition for 'pause'
riscv: hwprobe: export highest virtual userspace address
riscv: Improve sbi_ecall() code generation by reordering arguments
riscv: Add tracepoints for SBI calls and returns
riscv: Optimize crc32 with Zbc extension
riscv: Enable DAX VMEMMAP optimization
riscv: mm: Add support for ZONE_DEVICE
virtio-mem: Enable virtio-mem for RISC-V
riscv: Enable memory hotplugging for RISC-V
riscv: mm: Take memory hotplug read-lock during kernel page table dump
riscv: mm: Add memory hotplugging support
riscv: mm: Add pfn_to_kaddr() implementation
riscv: mm: Refactor create_linear_mapping_range() for memory hot add
...
|
||
Jann Horn
|
64e166099b |
kallsyms: get rid of code for absolute kallsyms
Commit
|
||
|
Linus Torvalds
|
3c3ff7be97 |
Merge tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman: - Remove support for 40x CPUs & platforms - Add support to the 64-bit BPF JIT for cpu v4 instructions - Fix PCI hotplug driver crash on powernv - Fix doorbell emulation for KVM on PAPR guests (nestedv2) - Fix KVM nested guest handling of some less used SPRs - Online NUMA nodes with no CPU/memory if they have a PCI device attached - Reduce memory overhead of enabling kfence on 64-bit Radix MMU kernels - Reimplement the iommu table_group_ops for pseries for VFIO SPAPR TCE Thanks to: Anjali K, Artem Savkov, Athira Rajeev, Breno Leitao, Brian King, Celeste Liu, Christophe Leroy, Esben Haabendal, Gaurav Batra, Gautam Menghani, Haren Myneni, Hari Bathini, Jeff Johnson, Krishna Kumar, Krzysztof Kozlowski, Nathan Lynch, Nicholas Piggin, Nick Bowler, Nilay Shroff, Rob Herring (Arm), Shawn Anastasio, Shivaprasad G Bhat, Sourabh Jain, Srikar Dronamraju, Timothy Pearson, Uwe Kleine-König, and Vaibhav Jain. * tag 'powerpc-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (57 commits) Documentation/powerpc: Mention 40x is removed powerpc: Remove 40x leftovers macintosh/therm_windtunnel: fix module unload. powerpc: Check only single values are passed to CPU/MMU feature checks powerpc/xmon: Fix disassembly CPU feature checks powerpc: Drop clang workaround for builtin constant checks powerpc64/bpf: jit support for signed division and modulo powerpc64/bpf: jit support for sign extended mov powerpc64/bpf: jit support for sign extended load powerpc64/bpf: jit support for unconditional byte swap powerpc64/bpf: jit support for 32bit offset jmp instruction powerpc/pci: Hotplug driver bridge support pci/hotplug/pnv_php: Fix hotplug driver crash on Powernv powerpc/configs: Update defconfig with now user-visible CONFIG_FSL_IFC powerpc: add missing MODULE_DESCRIPTION() macros macintosh/mac_hid: add MODULE_DESCRIPTION() KVM: PPC: add missing MODULE_DESCRIPTION() macros powerpc/kexec: Use of_property_read_reg() powerpc/64s/radix/kfence: map __kfence_pool at page granularity powerpc/pseries/iommu: Define spapr_tce_table_group_ops only with CONFIG_IOMMU_API ... |
||
|
Linus Torvalds
|
04d17331ca |
Merge tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities
for thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
kselftest: devices: Add test to detect device error logs
kselftest: Move ksft helper module to common directory
kselftest: devices: Move discoverable devices test to subdirectory
usb: gadget: f_uac2: fix non-newline-terminated function name
USB: uas: Implement the new shutdown callback
USB: core: add 'shutdown' callback to usb_driver
usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
usb: dwc2: add support for other Lantiq SoCs
usb: gadget: Use u16 types for 16-bit fields
usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
usb: dwc3: core: Check all ports when set phy suspend
usb: typec: tcpci: add support to set connector orientation
dt-bindings: usb: Convert fsl-usb to yaml
usb: typec: ucsi: reorder operations in ucsi_run_command()
usb: typec: ucsi: extract common code for command handling
usb: typec: ucsi: inline ucsi_read_message_in
usb: typec: ucsi: rework command execution functions
usb: typec: ucsi: split read operation
usb: typec: ucsi: simplify command sending API
...
|
||
|
Linus Torvalds
|
d7e78951a8 |
Merge tag 'net-6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Notably this includes fixes for a s390 build breakage.
Current release - new code bugs:
- eth: fbnic: fix s390 build
- eth: airoha: fix NULL pointer dereference in
airoha_qdma_cleanup_rx_queue()
Previous releases - regressions:
- flow_dissector: use DEBUG_NET_WARN_ON_ONCE
- ipv4: fix incorrect TOS in route get reply
- dsa: fix chip-wide frame size config in some drivers
Previous releases - always broken:
- netfilter: nf_set_pipapo: fix initial map fill
- eth: gve: fix XDP TX completion handling when counters overflow"
* tag 'net-6.11-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
eth: fbnic: don't build the driver when skb has more than 21 frags
net: dsa: b53: Limit chip-wide jumbo frame config to CPU ports
net: dsa: mv88e6xxx: Limit chip-wide frame size config to CPU ports
net: airoha: Fix NULL pointer dereference in airoha_qdma_cleanup_rx_queue()
net: wwan: t7xx: add support for Dell DW5933e
ipv4: Fix incorrect TOS in fibmatch route get reply
ipv4: Fix incorrect TOS in route get reply
net: flow_dissector: use DEBUG_NET_WARN_ON_ONCE
driver core: auxiliary bus: Fix documentation of auxiliary_device
net: airoha: fix error branch in airoha_dev_xmit and airoha_set_gdm_ports
gve: Fix XDP TX completion handling when counters overflow
ipvs: properly dereference pe in ip_vs_add_service
selftests: netfilter: add test case for recent mismatch bug
netfilter: nf_set_pipapo: fix initial map fill
netfilter: ctnetlink: use helper function to calculate expect ID
eth: fbnic: fix s390 build.
|
||
|
Linus Torvalds
|
12cc3d5389 |
Merge tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Lots of changes in this cycle, but mostly for cleanups and
refactoring.
Significant amount of changes are about DT schema conversions for ASoC
at this time while we see other usual suspects, too.
Some highlights below:
Core:
- Re-introduction of PCM sync ID support API
- MIDI2 time-base extension in ALSA sequencer API
ASoC:
- Syncing of features between simple-audio-card and the two
audio-graph cards
- Support for specifying the order of operations for components
within cards to allow quirking for unusual systems
- Lots of DT schema conversions
- Continued SOF/Intel updates for topology, SoundWire, IPC3/4
- New support for Asahi Kasei AK4619, Cirrus Logic CS530x, Everest
Semiconductors ES8311, NXP i.MX95 and LPC32xx, Qualcomm LPASS v2.5
and WCD937x, Realtek RT1318 and RT1320 and Texas Instruments
PCM5242
HD-audio:
- More quirks, Intel PantherLake support, senarytech codec support
- Refactoring of Cirrus codec component-binding
Others:
- ALSA control kselftest improvements, and fixes for input value
checks in various drivers"
* tag 'sound-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (349 commits)
kselftest/alsa: Log the PCM ID in pcm-test
kselftest/alsa: Use card name rather than number in test names
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/tas2781: Add new quirk for Lenovo Hera2 Laptop
ALSA: seq: ump: Skip useless ports for static blocks
ALSA: pcm_dmaengine: Don't synchronize DMA channel when DMA is paused
ALSA: usb: Use BIT() for bit values
ALSA: usb: Fix UBSAN warning in parse_audio_unit()
ALSA: hda/realtek: Enable headset mic on Positivo SU C1400
ASoC: tas2781: Add new Kontrol to set tas2563 digital Volume
ASoC: codecs: wcd937x: Remove separate handling for vdd-buck supply
ASoC: codecs: wcd937x: Remove the string compare in MIC BIAS widget settings
ASoC: codecs: wcd937x-sdw: Fix Unbalanced pm_runtime_enable
ASoC: dt-bindings: cirrus,cs42xx8: Convert to dtschema
ASoC: cs530x: Remove bclk from private structure
ASoC: cs530x: Calculate proper bclk rate using TDM
ASoC: dt-bindings: cirrus,cs4270: Convert to dtschema
firmware: cs_dsp: Rename fw_ver to wmfw_ver
firmware: cs_dsp: Clarify wmfw format version log message
firmware: cs_dsp: Make wmfw and bin filename arguments const char *
...
|
||
|
Linus Torvalds
|
f4f92db439 |
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Several new features here:
- Virtio find vqs API has been reworked (required to fix the
scalability issue we have with adminq, which I hope to merge later
in the cycle)
- vDPA driver for Marvell OCTEON
- virtio fs performance improvement
- mlx5 migration speedups
Fixes, cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (56 commits)
virtio: rename virtio_find_vqs_info() to virtio_find_vqs()
virtio: remove unused virtio_find_vqs() and virtio_find_vqs_ctx() helpers
virtio: convert the rest virtio_find_vqs() users to virtio_find_vqs_info()
virtio_balloon: convert to use virtio_find_vqs_info()
virtiofs: convert to use virtio_find_vqs_info()
scsi: virtio_scsi: convert to use virtio_find_vqs_info()
virtio_net: convert to use virtio_find_vqs_info()
virtio_crypto: convert to use virtio_find_vqs_info()
virtio_console: convert to use virtio_find_vqs_info()
virtio_blk: convert to use virtio_find_vqs_info()
virtio: rename find_vqs_info() op to find_vqs()
virtio: remove the original find_vqs() op
virtio: call virtio_find_vqs_info() from virtio_find_single_vq() directly
virtio: convert find_vqs() op implementations to find_vqs_info()
virtio_pci: convert vp_*find_vqs() ops to find_vqs_info()
virtio: introduce virtio_queue_info struct and find_vqs_info() config op
virtio: make virtio_find_single_vq() call virtio_find_vqs()
virtio: make virtio_find_vqs() call virtio_find_vqs_ctx()
caif_virtio: use virtio_find_single_vq() for single virtqueue finding
vdpa/mlx5: Don't enable non-active VQs in .set_vq_ready()
...
|
||
Jason A. Donenfeld
|
4920a2590e |
selftests/vDSO: add tests for vgetrandom
This adds two tests for vgetrandom. The first one, vdso_test_chacha, simply checks that the assembly implementation of chacha20 matches that of libsodium, a basic sanity check that should catch most errors. The second, vdso_test_getrandom, is a full "libc-like" implementation of the userspace side of vgetrandom() support. It's meant to be used also as example code for libcs that might be integrating this. Cc: linux-kselftest@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
|
Jason A. Donenfeld
|
9651fcedf7 |
mm: add MAP_DROPPABLE for designating always lazily freeable mappings
The vDSO getrandom() implementation works with a buffer allocated with a
new system call that has certain requirements:
- It shouldn't be written to core dumps.
* Easy: VM_DONTDUMP.
- It should be zeroed on fork.
* Easy: VM_WIPEONFORK.
- It shouldn't be written to swap.
* Uh-oh: mlock is rlimited.
* Uh-oh: mlock isn't inherited by forks.
- It shouldn't reserve actual memory, but it also shouldn't crash when
page faulting in memory if none is available
* Uh-oh: VM_NORESERVE means segfaults.
It turns out that the vDSO getrandom() function has three really nice
characteristics that we can exploit to solve this problem:
1) Due to being wiped during fork(), the vDSO code is already robust to
having the contents of the pages it reads zeroed out midway through
the function's execution.
2) In the absolute worst case of whatever contingency we're coding for,
we have the option to fallback to the getrandom() syscall, and
everything is fine.
3) The buffers the function uses are only ever useful for a maximum of
60 seconds -- a sort of cache, rather than a long term allocation.
These characteristics mean that we can introduce VM_DROPPABLE, which
has the following semantics:
a) It never is written out to swap.
b) Under memory pressure, mm can just drop the pages (so that they're
zero when read back again).
c) It is inherited by fork.
d) It doesn't count against the mlock budget, since nothing is locked.
e) If there's not enough memory to service a page fault, it's not fatal,
and no signal is sent.
This way, allocations used by vDSO getrandom() can use:
VM_DROPPABLE | VM_DONTDUMP | VM_WIPEONFORK | VM_NORESERVE
And there will be no problem with OOMing, crashing on overcommitment,
using memory when not in use, not wiping on fork(), coredumps, or
writing out to swap.
In order to let vDSO getrandom() use this, expose these via mmap(2) as
MAP_DROPPABLE.
Note that this involves removing the MADV_FREE special case from
sort_folio(), which according to Yu Zhao is unnecessary and will simply
result in an extra call to shrink_folio_list() in the worst case. The
chunk removed reenables the swapbacked flag, which we don't want for
VM_DROPPABLE, and we can't conditionalize it here because there isn't a
vma reference available.
Finally, the provided self test ensures that this is working as desired.
Cc: linux-mm@kvack.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
||
|
Linus Torvalds
|
ef7c8f2b1f |
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe: - The iova_bitmap logic for efficiently reporting dirty pages back to userspace has a few more tricky corner case bugs that have been resolved and backed with new tests. The revised version has simpler logic. - Shared branch with iommu for handle support when doing domain attach. Handles allow the domain owner to include additional private data on a per-device basis. - IO Page Fault Reporting to userspace via iommufd. Page faults can be generated on fault capable HWPTs when a translation is not present. Routing them to userspace would allow a VMM to be able to virtualize them into an emulated vIOMMU. This is the next step to fully enabling vSVA support. * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (26 commits) iommufd: Put constants for all the uAPI enums iommufd: Fix error pointer checking iommufd: Add check on user response code iommufd: Remove IOMMUFD_PAGE_RESP_FAILURE iommufd: Require drivers to supply the cache_invalidate_user ops iommufd/selftest: Add coverage for IOPF test iommufd/selftest: Add IOPF support for mock device iommufd: Associate fault object with iommufd_hw_pgtable iommufd: Fault-capable hwpt attach/detach/replace iommufd: Add iommufd fault object iommufd: Add fault and response message definitions iommu: Extend domain attach group with handle support iommu: Add attach handle to struct iopf_group iommu: Remove sva handle list iommu: Introduce domain attachment handle iommufd/iova_bitmap: Remove iterator logic iommufd/iova_bitmap: Dynamic pinning on iova_bitmap_set() iommufd/iova_bitmap: Consolidate iova_bitmap_set exit conditionals iommufd/iova_bitmap: Move initial pinning to iova_bitmap_for_each() iommufd/iova_bitmap: Cache mapped length in iova_bitmap_map struct ... |
||
|
Linus Torvalds
|
76d9b92e68 |
Merge tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
"The most prominent change this time is the kmem_buckets based
hardening of kmalloc() allocations from Kees Cook.
We have also extended the kmalloc() alignment guarantees for
non-power-of-two sizes in a way that benefits rust.
The rest are various cleanups and non-critical fixups.
- Dedicated bucket allocator (Kees Cook)
This series [1] enhances the probabilistic defense against heap
spraying/grooming of CONFIG_RANDOM_KMALLOC_CACHES from last year.
kmalloc() users that are known to be useful for exploits can get
completely separate set of kmalloc caches that can't be shared with
other users. The first converted users are alloc_msg() and
memdup_user().
The hardening is enabled by CONFIG_SLAB_BUCKETS.
- Extended kmalloc() alignment guarantees (Vlastimil Babka)
For years now we have guaranteed natural alignment for power-of-two
allocations, but nothing was defined for other sizes (in practice,
we have two such buckets, kmalloc-96 and kmalloc-192).
To avoid unnecessary padding in the rust layer due to its alignment
rules, extend the guarantee so that the alignment is at least the
largest power-of-two divisor of the requested size.
This fits what rust needs, is a superset of the existing
power-of-two guarantee, and does not in practice change the layout
(and thus does not add overhead due to padding) of the kmalloc-96
and kmalloc-192 caches, unless slab debugging is enabled for them.
- Cleanups and non-critical fixups (Chengming Zhou, Suren
Baghdasaryan, Matthew Willcox, Alex Shi, and Vlastimil Babka)
Various tweaks related to the new alloc profiling code, folio
conversion, debugging and more leftovers after SLAB"
Link: https://lore.kernel.org/all/20240701190152.it.631-kees@kernel.org/ [1]
* tag 'slab-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm/memcg: alignment memcg_data define condition
mm, slab: move prepare_slab_obj_exts_hook under CONFIG_MEM_ALLOC_PROFILING
mm, slab: move allocation tagging code in the alloc path into a hook
mm/util: Use dedicated slab buckets for memdup_user()
ipc, msg: Use dedicated slab buckets for alloc_msg()
mm/slab: Introduce kmem_buckets_create() and family
mm/slab: Introduce kvmalloc_buckets_node() that can take kmem_buckets argument
mm/slab: Plumb kmem_buckets into __do_kmalloc_node()
mm/slab: Introduce kmem_buckets typedef
slab, rust: extend kmalloc() alignment guarantees to remove Rust padding
slab: delete useless RED_INACTIVE and RED_ACTIVE
slab: don't put freepointer outside of object if only orig_size
slab: make check_object() more consistent
mm: Reduce the number of slab->folio casts
mm, slab: don't wrap internal functions with alloc_hooks()
|
||
|
Linus Torvalds
|
b2fc97c186 |
Merge tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport: - 'reserve_mem' command line parameter to allow creation of named memory reservation at boot time. The driving use-case is to improve the ability of pstore to retain ramoops data across reboots. - cleanups and small improvements in memblock and mm_init - new tests cases in memblock test suite * tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: fix implicit declaration of function 'numa_valid_node' memblock: Move late alloc warning down to phys alloc pstore/ramoops: Add ramoops.mem_name= command line option mm/memblock: Add "reserve_mem" to reserved named memory at boot up mm/mm_init.c: don't initialize page->lru again mm/mm_init.c: not always search next deferred_init_pfn from very beginning mm/mm_init.c: use deferred_init_mem_pfn_range_in_zone() to decide loop condition mm/mm_init.c: get the highest zone directly mm/mm_init.c: move nr_initialised reset down a bit mm/memblock: fix a typo in description of for_each_mem_region() mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap mm/memblock: return true directly on finding overlap region memblock tests: add memblock_overlaps_region_checks mm/memblock: fix comment for memblock_isolate_range() memblock tests: add memblock_reserve_many_may_conflict_check() memblock tests: add memblock_reserve_all_locations_check() mm/memblock: remove empty dummy entry |
||
|
Linus Torvalds
|
68b5973045 |
Merge tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build:
- Build each directory as a library so that depedency check for the
python extension module can be automatic
- Use pkg-config to check libtraceevent and libtracefs
perf sched:
- Add --task-name and --fuzzy-name options for `perf sched map`
It focuses on selected tasks only by removing unrelated tasks in
the output. It matches the task comm with the given string and the
--fuzzy-name option allows the partial matching:
$ sudo perf sched record -a sleep 1
$ sudo perf sched map --task-name kworker --fuzzy-name
. . . . - *A0 . . 481065.315131 secs A0 => kworker/5:2-i91:438521
. . . . - *- . . 481065.315160 secs
*B0 . . . - . . . 481065.316435 secs B0 => kworker/0:0-i91:437860
*- . . . . . . . 481065.316441 secs
. . . . . *A0 . . 481065.318703 secs
. . . . . *- . . 481065.318717 secs
. . *C0 . . . . . 481065.320544 secs C0 => kworker/u16:30-:430186
. . *- . . . . . 481065.320555 secs
. . *D0 . . . . . 481065.328524 secs D0 => kworker/2:0-kdm:429654
*B0 . D0 . - . . . 481065.328527 secs
*- . D0 . - . . . 481065.328535 secs
. . *- . . . . . 481065.328535 secs
- Fix -r/--repeat option of perf sched replay
The documentation said -1 will work as infinity but it didn't
accept the value. Update the code and document to use 0 instead
- Fix perf sched timehist to account the delay time for preempted
tasks
Perf event filtering:
- perf top gained filtering support on regular events using BPF like
perf record. Previously it was able to use it for tracepoints only
- The BPF filter now supports filtering by UID/GID. This should be
preferred than -u <UID> option as it's racy to scan /proc to check
tasks for the user and fails to open an event for the task if it's
already gone
$ sudo perf top -e cycles --filter "uid == $(id -u)"
perf report:
- Skip dummy events in the group output by default. The --skip-empty
option controls display of empty events without samples. But perf
report can force display all events in a group
In this case, auto-added a dummy event (for a system-wide record)
ends up in the output. Now it can skip those empty events even in
the group display mode
To preserve the old behavior, run this:
$ perf report --group --no-skip-empty
perf stat:
- Choose the most disaggregate option when multiple aggregation
options are given. It used to pick the last option in the command
line but it can be confusing and not consistent. Now it'll choose
the smallest unit
For example, it'd aggregate the result per-core when the user gave
both --per-socket and --per-core options at the same time
Internals:
- Fix `perf bench` when some CPUs are offline
- Fix handling of JIT symbol mappings to accept "/tmp/perf-${PID}.map
patterns only so that it can not be confused by other /tmp/perf-*
files
- Many improvements and fixes for `perf test`
Others:
- Support some new instructions for Intel-PT
- Fix syscall ID mapping in perf trace
- Document AMD IBS PMU usages
- Change `perf lock info` to show map and thread info by default
Vendor JSON events:
- Update Intel events and metrics
- Add i.MX9[35] DDR metrics"
* tag 'perf-tools-for-v6.11-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (125 commits)
perf trace: Fix iteration of syscall ids in syscalltbl->entries
perf dso: Fix address sanitizer build
perf mem: Warn if memory events are not supported on all CPUs
perf arm-spe: Support multiple Arm SPE PMUs
perf build x86: Fix SC2034 error in syscalltbl.sh
perf record: Fix memset out-of-range error
perf sched map: Add --fuzzy-name option for fuzzy matching in task names
perf sched map: Add support for multiple task names using CSV
perf sched map: Add task-name option to filter the output map
perf build: Conditionally add feature check flags for libtrace{event,fs}
perf install: Don't propagate subdir to Documentation submake
perf vendor events arm64:: Add i.MX95 DDR Performance Monitor metrics
perf vendor events arm64:: Add i.MX93 DDR Performance Monitor metrics
perf dsos: When adding a dso into sorted dsos maintain the sort order
perf comm str: Avoid sort during insert
perf report: Calling available function for stats printing
perf intel-pt: Fix exclude_guest setting
perf intel-pt: Fix aux_watermark calculation for 64-bit size
perf sched replay: Fix -r/--repeat command line option for infinity
perf: pmus: Remove unneeded semicolon
...
|
||
|
Linus Torvalds
|
1777e471e1 |
Merge tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt: "Trivial updates for 6.11: - Use pretty formatting only on interactive tty in rtla/osnoise - Better reporting when histogram is empty in rtla/osnoise - Use the correct library name for "libtracefs" in feature detection" * tag 'trace-tools-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tools: build: use correct lib name for libtracefs feature detection rtla/osnoise: Better report when histogram is empty rtla/osnoise: Use pretty formatting only on interactive tty |
||
|
Linus Torvalds
|
70045bfc4c |
Merge tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ftrace updates from Steven Rostedt: "Rewrite of function graph tracer to allow multiple users Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots" * tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits) fgraph: Use str_plural() in test_graph_storage_single() function_graph: Add READ_ONCE() when accessing fgraph_array[] ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct() function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it function_graph: Fix up ftrace_graph_ret_addr() function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests fgraph: Remove some unused functions ftrace: Hide one more entry in stack trace when ftrace_pid is enabled function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled function_graph: Make fgraph_do_direct static key static ftrace: Fix prototypes for ftrace_startup/shutdown_subops() ftrace: Assign RCU list variable with rcu_assign_ptr() ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU ftrace: Declare function_trace_op in header to quiet sparse warning ftrace: Add comments to ftrace_hash_move() and friends ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify() ftrace: Add comments to ftrace_hash_rec_disable/enable() ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update() ftrace: Rename dup_hash() and comment it ... |
||
|
Linus Torvalds
|
91bd008d4e |
Merge tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Uprobes:
- x86/shstk: Make return uprobe work with shadow stack
- Add uretprobe syscall which speeds up the uretprobe 10-30% faster.
This syscall is automatically used from user-space trampolines
which are generated by the uretprobe. If this syscall is used by
normal user program, it will cause SIGILL. Note that this is
currently only implemented on x86_64.
(This also has two fixes for adjusting the syscall number to avoid
conflict with new *attrat syscalls.)
- uprobes/perf: fix user stack traces in the presence of pending
uretprobe. This corrects the uretprobe's trampoline address in the
stacktrace with correct return address
- selftests/x86: Add a return uprobe with shadow stack test
- selftests/bpf: Add uretprobe syscall related tests.
- test case for register integrity check
- test case with register changing case
- test case for uretprobe syscall without uprobes (expected to fail)
- test case for uretprobe with shadow stack
- selftests/bpf: add test validating uprobe/uretprobe stack traces
- MAINTAINERS: Add uprobes entry. This does not specify the tree but
to clarify who maintains and reviews the uprobes
Kprobes:
- tracing/kprobes: Test case cleanups.
Replace redundant WARN_ON_ONCE() + pr_warn() with WARN_ONCE() and
remove unnecessary code from selftest
- tracing/kprobes: Add symbol counting check when module loads.
This checks the uniqueness of the probed symbol on modules. The
same check has already done for kernel symbols
(This also has a fix for build error with CONFIG_MODULES=n)
Cleanup:
- Add MODULE_DESCRIPTION() macros for fprobe and kprobe examples"
* tag 'probes-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
MAINTAINERS: Add uprobes entry
selftests/bpf: Change uretprobe syscall number in uprobe_syscall test
uprobe: Change uretprobe syscall scope and number
tracing/kprobes: Fix build error when find_module() is not available
tracing/kprobes: Add symbol counting check when module loads
selftests/bpf: add test validating uprobe/uretprobe stack traces
perf,uprobes: fix user stack traces in the presence of pending uretprobes
tracing/kprobe: Remove cleanup code unrelated to selftest
tracing/kprobe: Integrate test warnings into WARN_ONCE
selftests/bpf: Add uretprobe shadow stack test
selftests/bpf: Add uretprobe syscall call from user space test
selftests/bpf: Add uretprobe syscall test for regs changes
selftests/bpf: Add uretprobe syscall test for regs integrity
selftests/x86: Add return uprobe shadow stack test
uprobe: Add uretprobe syscall to speed up return probe
uprobe: Wire up uretprobe system call
x86/shstk: Make return uprobe work with shadow stack
samples: kprobes: add missing MODULE_DESCRIPTION() macros
fprobe: add missing MODULE_DESCRIPTION() macro
|
||
Mark Brown
|
4594d26fca |
kselftest/alsa: Log the PCM ID in pcm-test
Drivers report a string with a name for each PCM, log it during startup of pcm-test as a diagnostic aid. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-2-60f1acdde096@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Mark Brown
|
b1a7b97aa5 |
kselftest/alsa: Use card name rather than number in test names
Currently for the PCM and mixer tests we report test names which identify the card being tested with the card number. This ensures we have unique names but since card numbers are dynamically assigned at runtime the names we end up with will often not be stable on systems with multiple cards especially where those cards are provided by separate modules loeaded at runtime. This makes it difficult for automated systems and UIs to relate test results between runs on affected platforms. Address this by replacing our use of card numbers with card names which are more likely to be stable across runs. We use the card ID since it is guaranteed to be unique by default, unlike the long name. There is still some vulnerability to ordering issues if multiple cards with the same base ID are present in the system but have separate dependencies but not all drivers put distinguishing information in their long names. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://patch.msgid.link/20240716-alsa-kselftest-board-name-v2-1-60f1acdde096@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
Paolo Abeni
|
a1b7dbca14 |
Merge tag 'nf-24-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for net: 1) Call nf_expect_get_id() to delete expectation by ID. By trial and error it is possible to leak the LSB of the expectation address on x86_64. This bug is a leftover when converting the existing code to use nf_expect_get_id(). 2) Incorrect initialization in pipapo set backend leads to packet mismatches. From Florian Westphal. 3) Extend netfilter's selftests to cover for the pipapo set backend, also from Florian. 4) Fix sparse warning in IPVS when adding service, from Chen Hanxiao. netfilter pull request 24-07-17 * tag 'nf-24-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: ipvs: properly dereference pe in ip_vs_add_service selftests: netfilter: add test case for recent mismatch bug netfilter: nf_set_pipapo: fix initial map fill netfilter: ctnetlink: use helper function to calculate expect ID ==================== Link: https://patch.msgid.link/20240717215214.225394-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
Ido Schimmel
|
f036e68212 |
ipv4: Fix incorrect TOS in fibmatch route get reply
The TOS value that is returned to user space in the route get reply is
the one with which the lookup was performed ('fl4->flowi4_tos'). This is
fine when the matched route is configured with a TOS as it would not
match if its TOS value did not match the one with which the lookup was
performed.
However, matching on TOS is only performed when the route's TOS is not
zero. It is therefore possible to have the kernel incorrectly return a
non-zero TOS:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 tos 0x1c dev dummy1 proto kernel scope link src 192.0.2.1
Fix by instead returning the DSCP field from the FIB result structure
which was populated during the route lookup.
Output after the patch:
# ip link add name dummy1 up type dummy
# ip address add 192.0.2.1/24 dev dummy1
# ip route get fibmatch 192.0.2.2 tos 0xfc
192.0.2.0/24 dev dummy1 proto kernel scope link src 192.0.2.1
Extend the existing selftests to not only verify that the correct route
is returned, but that it is also returned with correct "tos" value (or
without it).
Fixes:
|
||
|
Linus Torvalds
|
6e504d2c61 |
Merge tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires: - rewrite of the HID-BPF internal implementation to use bpf struct_ops instead of a tracing endpoint (Benjamin Tissoires) - add two new HID-BPF hooks to be able to intercept userspace calls targeting a HID device and filtering them (Benjamin Tissoires) - add support for various new devices through HID-BPF filters (Benjamin Tissoires) - add support for the magic keyboard backlight (Orlando Chamberlain) - add the missing MODULE_DESCRIPTION() macros in HID drivers (Jeff Johnson) - use of kvzalloc in case memory gets too fragmented (Hailong Liu) - retrieve the device firmware node in the child HID device (Danny Kaehn) - some hid-uclogic improvements (José Expósito) - some more typos, trivial fixes, kernel doctext and unused functions cleanups * tag 'for-linus-2024071601' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (60 commits) HID: hid-steam: Fix typo in goto label HID: mcp2221: Remove unnecessary semicolon HID: Fix spelling mistakes "Kensigton" -> "Kensington" HID: add more missing MODULE_DESCRIPTION() macros HID: samples: fix the 2 struct_ops definitions HID: fix for amples in for-6.11/bpf HID: apple: Add support for magic keyboard backlight on T2 Macs HID: bpf: Thrustmaster TCA Yoke Boeing joystick fix HID: bpf: Add Huion Dial 2 bpf fixup HID: bpf: Add support for the XP-PEN Deco Mini 4 HID: bpf: move the BIT() macro to hid_bpf_helpers.h HID: bpf: add a driver for the Huion Inspiroy 2S (H641P) HID: bpf: Add a HID report composition helper macros HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: doc fixes for hid_hw_request() hooks HID: bpf: fix gcc warning and unify __u64 into u64 selftests/hid: ensure CKI can compile our new tests on old kernels selftests/hid: add an infinite loop test for hid_bpf_try_input_report selftests/hid: add another test for injecting an event from an event hook HID: bpf: allow hid_device_event hooks to inject input reports on self ... |
||
|
Linus Torvalds
|
a5cb6b2bbf |
Merge tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen: - amd/pmf: Report system state changes using existing input events - asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop keyboard RGB LED sysfs interface - dell-pc: Fan modes / platform profile support - hp-wmi: Fix platform profile switching on Omen/Victus laptops - intel/ISST: Use only TPMI interface when TPMI and legacy interfaces are available - intel/pmc: LTR restore support to pair with LTR ignore - intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU numbering mapping support - WMI: driver override support and docs improvements - lenovo-yoga-c630: Support for EC (platform/arm64) - platform/arm64: Fix build with COMPILE_TEST (broke after addition of C630) - tools: Intel Speed Select Turbo Ratio Limit fix - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) platform/x86: asus-wmi: fix TUF laptop RGB variant platform/x86/intel/tpmi/plr: Fix output in plr_print_bits() Docs/admin-guide: Remove pmf leftover reference from the index platform/x86: ideapad-laptop: use cleanup.h platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM platform/x86/amd/pmf: Remove update system state document platform/x86/amd/pmf: Use existing input event codes to update system states platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops platform/x86:intel/pmc: Add support to undo ltr_ignore platform/x86:intel/pmc: Use the Elvis operator platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro platform/x86:intel/pmc: Remove unneeded min_t check platform/x86:intel/pmc: Add support to show ltr_ignore value platform/x86:intel/pmc: Move pmc assignment closer to first usage platform/x86:intel/pmc: Convert index variables to be unsigned platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers platform/x86:intel/pmc: Use the return value of pmc_core_send_msg tools/power/x86/intel-speed-select: v1.20 release ... |
||
James Clark
|
92717bc077 |
perf dso: Fix build when libunwind is enabled
Now that symsrc_filename is always accessed through an accessor, we also
need a free() function for it to avoid the following compilation error:
util/unwind-libunwind-local.c:416:12: error: lvalue required as unary
‘&’ operand
416 | zfree(&dso__symsrc_filename(dso));
Fixes:
|
||
Guilherme Amadio
|
2085948e5f |
tools/latency: Use pkg-config in lib_setup of Makefile.config
This allows to build against libtraceevent and libtracefs installed in non-standard locations. Signed-off-by: Guilherme Amadio <amadio@gentoo.org> Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Tested-by: Leo Yan <leo.yan@arm.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/r/20240717174739.186988-6-amadio@gentoo.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Guilherme Amadio
|
eb545a42d0 |
tools/rtla: Use pkg-config in lib_setup of Makefile.config
This allows to build against libtraceevent and libtracefs installed in non-standard locations. Signed-off-by: Guilherme Amadio <amadio@gentoo.org> Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Tested-by: Leo Yan <leo.yan@arm.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20240712194511.3973899-5-amadio@gentoo.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Guilherme Amadio
|
e525eff7cc |
tools/verification: Use pkg-config in lib_setup of Makefile.config
This allows to build against libtraceevent and libtracefs installed in non-standard locations. Signed-off-by: Guilherme Amadio <amadio@gentoo.org> Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Tested-by: Leo Yan <leo.yan@arm.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Link: https://lore.kernel.org/r/20240712194511.3973899-4-amadio@gentoo.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Guilherme Amadio
|
8f61e98ad5 |
tools: Make pkg-config dependency checks usable by other tools
Other tools, in tools/verification and tools/tracing, make use of libtraceevent and libtracefs as dependencies. This allows setting up the feature check flags for them as well. Signed-off-by: Guilherme Amadio <amadio@gentoo.org> Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Tested-by: Leo Yan <leo.yan@arm.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/r/20240717174739.186988-3-amadio@gentoo.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Guilherme Amadio
|
37ac347f87 |
perf build: Warn if libtracefs is not found
Signed-off-by: Guilherme Amadio <amadio@gentoo.org> Tested-by: Thorsten Leemhuis <linux@leemhuis.info> Tested-by: Leo Yan <leo.yan@arm.com> Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/r/20240717174739.186988-2-amadio@gentoo.org Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
Florian Westphal
|
0935ee6032 |
selftests: netfilter: add test case for recent mismatch bug
Without 'netfilter: nf_set_pipapo: fix initial map fill' this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 1s [ OK ]
net,port,proto 1s [FAIL]
post-add: should have returned 10.5.8.0/24 . 51-60 . 6-17 but got table inet filter {
set test {
type ipv4_addr . inet_service . inet_proto
flags interval,timeout
elements = { 10.5.7.0/24 . 51-60 . 6-17 }
}
}
The other sets defined in the selftest do not trigger this bug, it only
occurs if the first field group bitsize is smaller than the largest
group bitsize.
For each added element, check 'get' works and actually returns the
requested range.
After map has been filled, check all added ranges can still be
retrieved.
For each deleted element, check that 'get' fails.
Based on a reproducer script from Yi Chen.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
||
|
Linus Torvalds
|
51835949dd |
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
0434dbe320 |
Merge tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan: - change resctrl test to cleanup resctrl_val() and generalize it by removing test name specific handling from the function. - several clang build failure fixes to framework and tests - add tests to verify IFS (In Field Scan) driver functionality - cleanups to remove unused variables and document changes * tag 'linux_kselftest-next-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (33 commits) selftests: ifs: verify IFS ARRAY BIST functionality selftests: ifs: verify IFS scan test functionality selftests: ifs: verify test image loading functionality selftests: ifs: verify test interfaces are created by the driver selftests/dma:remove unused variable selftests/breakpoints:Remove unused variable selftests/x86: fix printk warnings reported by clang selftests/x86: remove (or use) unused variables and functions selftests/x86: avoid -no-pie warnings from clang during compilation selftests/x86: build sysret_rip.c with clang selftests/x86: build fsgsbase_restore.c with clang selftests: x86: test_FISTTP: use fisttps instead of ambiguous fisttp selftests/x86: fix Makefile dependencies to work with clang selftests/timers: remove unused irqcount variable selftests: Add information about TAP conformance in tests selftests/resctrl: Remove test name comparing from write_bm_pid_to_resctrl() selftests/resctrl: Remove mongrp from CMT test selftests/resctrl: Remove mongrp from MBA test selftests/resctrl: Convert ctrlgrp & mongrp to pointers selftests/resctrl: Make some strings passed to resctrlfs functions const ... |
||
|
Linus Torvalds
|
0c182ac2eb |
Merge tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar: - Fix bug that caused objtool to confuse certain memory ops added by KASAN instrumentation as stack accesses - Various faddr2line optimizations - Improve error messages * tag 'objtool-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool/x86: objtool can confuse memory and stack access objtool: Use "action" in error message to be consistent with help scripts/faddr2line: Check only two symbols when calculating symbol size scripts/faddr2line: Remove call to addr2line from find_dir_prefix() scripts/faddr2line: Invoke addr2line as a single long-running process scripts/faddr2line: Pass --addresses argument to addr2line scripts/faddr2line: Check vmlinux only once scripts/faddr2line: Combine three readelf calls into one scripts/faddr2line: Reduce number of readelf calls to three |
||
|
Linus Torvalds
|
41906248d0 |
Merge tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.
Specifics:
- Add Loongson-3 CPUFreq driver support (Huacai Chen)
- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)
- Switch cpufreq to new Intel CPU model defines (Tony Luck)
- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)
- Make cpufreq_boost_enabled() return bool (Dhruva Gole)
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)
- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)
- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)
- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)
- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)
- Simplify if condition in the idle_inject driver (Thorsten Blum)
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)
- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"
* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...
|
||
|
Linus Torvalds
|
ce5a51bfac |
Merge tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook: - lkdtm/bugs: add test for hung smp_call_function_single() (Mark Rutland) - gcc-plugins: Remove duplicate included header file stringpool.h (Thorsten Blum) - ARM: Remove address checking for MMUless devices (Yanjun Yang) - randomize_kstack: Clean up per-arch entropy and codegen - KCFI: Make FineIBT mode Kconfig selectable - fortify: Do not special-case 0-sized destinations * tag 'hardening-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: randomize_kstack: Improve stack alignment codegen ARM: Remove address checking for MMUless devices gcc-plugins: Remove duplicate included header file stringpool.h randomize_kstack: Remove non-functional per-arch entropy filtering fortify: Do not special-case 0-sized destinations x86/alternatives: Make FineIBT mode Kconfig selectable lkdtm/bugs: add test for hung smp_call_function_single() |
||
|
Linus Torvalds
|
1ca995edf8 |
Merge tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook: - interrupt SECCOMP_IOCTL_NOTIF_RECV when all users exit (Andrei Vagin) - Update selftests to check for expected NOTIF_RECV exits (Andrei Vagin) * tag 'seccomp-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests/seccomp: check that a zombie leader doesn't affect others selftests/seccomp: add test for NOTIF_RECV and unused filters seccomp: release task filters when the task exits seccomp: interrupt SECCOMP_IOCTL_NOTIF_RECV when all users have exited |
||
|
Linus Torvalds
|
72fda6c8e5 |
Merge tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook: - Use value of kernel.randomize_va_space once per exec (Alexey Dobriyan) - Honor PT_LOAD alignment for static PIE - Make bprm->argmin only visible under CONFIG_MMU - Add KUnit testing of bprm_stack_limits() * tag 'execve-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: exec: Avoid pathological argc, envc, and bprm->p values execve: Keep bprm->argmin behind CONFIG_MMU ELF: fix kernel.randomize_va_space double read exec: Add KUnit test for bprm_stack_limits() binfmt_elf: Honor PT_LOAD alignment for static PIE binfmt_elf: Calculate total_size earlier selftests/exec: Build both static and non-static load_address tests |
||
|
Linus Torvalds
|
d80f2996b8 |
Merge tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann: "Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix" * tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: vmlinux.lds.h: catch .bss..L* sections into BSS") fixmap: Remove unused set_fixmap_offset_io() riscv: convert to generic syscall table openrisc: convert to generic syscall table nios2: convert to generic syscall table loongarch: convert to generic syscall table hexagon: use new system call table csky: convert to generic syscall table arm64: rework compat syscall macros arm64: generate 64-bit syscall.tbl arm64: convert unistd_32.h to syscall.tbl format arc: convert to generic syscall table clone3: drop __ARCH_WANT_SYS_CLONE3 macro kbuild: add syscall table generation to scripts/Makefile.asm-headers kbuild: verify asm-generic header list loongarch: avoid generating extra header files um: don't generate asm/bpf_perf_event.h csky: drop asm/gpio.h wrapper syscalls: add generic scripts/syscall.tbl |
||
Paolo Bonzini
|
dbfd50cb45 |
Merge tag 'kvm-x86-selftests-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM selftests for 6.11
- Remove dead code in the memslot modification stress test.
- Treat "branch instructions retired" as supported on all AMD Family 17h+ CPUs.
- Print the guest pseudo-RNG seed only when it changes, to avoid spamming the
log for tests that create lots of VMs.
- Make the PMU counters test less flaky when counting LLC cache misses by
doing CLFLUSH{OPT} in every loop iteration.
|
||
|
Paolo Bonzini
|
5dcc1e7614 |
Merge tag 'kvm-x86-misc-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.11 - Add a global struct to consolidate tracking of host values, e.g. EFER, and move "shadow_phys_bits" into the structure as "maxphyaddr". - Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX. - Print the name of the APICv/AVIC inhibits in the relevant tracepoint. - Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor. - Misc cleanups |