The CID management is a complex beast, which affects both scheduling and
task migration. The compaction mechanism forces random tasks of a process
into task work on exit to user space causing latency spikes.
Revert back to the initial simple bitmap allocating mechanics, which are
known to have scalability issues as that allows to gradually build up a
replacement functionality in a reviewable way.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251119172549.068197830@linutronix.de
TIF_NOTIFY_RESUME is a multiplexing TIF bit, which is suboptimal especially
with the RSEQ fast path depending on it, but not really handling it.
Define a separate TIF_RSEQ in the generic TIF space and enable the full
separation of fast and slow path for architectures which utilize that.
That avoids the hassle with invocations of resume_user_mode_work() from
hypervisors, which clear TIF_NOTIFY_RESUME. It makes the therefore required
re-evaluation at the end of vcpu_run() a NOOP on architectures which
utilize the generic TIF space and have a separate TIF_RSEQ.
The hypervisor TIF handling does not include the separate TIF_RSEQ as there
is no point in doing so. The guest does neither know nor care about the VMM
host applications RSEQ state. That state is only relevant when the ioctl()
returns to user space.
The fastpath implementation still utilizes TIF_NOTIFY_RESUME for failure
handling, but this only happens within exit_to_user_mode_loop(), so
arguably the hypervisor ioctl() code is long done when this happens.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084307.903622031@linutronix.de
Now that all bits and pieces are in place, hook the RSEQ handling fast path
function into exit_to_user_mode_prepare() after the TIF work bits have been
handled. If case of fast path failure, TIF_NOTIFY_RESUME has been raised
and the caller needs to take another turn through the TIF handling slow
path.
This only works for architectures which use the generic entry code.
Architectures who still have their own incomplete hacks are not supported
and won't be.
This results in the following improvements:
Kernel build Before After Reduction
exit to user 80692981 80514451
signal checks: 32581 121 99%
slowpath runs: 1201408 1.49% 198 0.00% 100%
fastpath runs: 675941 0.84% N/A
id updates: 1233989 1.53% 50541 0.06% 96%
cs checks: 1125366 1.39% 0 0.00% 100%
cs cleared: 1125366 100% 0 100%
cs fixup: 0 0% 0
RSEQ selftests Before After Reduction
exit to user: 386281778 387373750
signal checks: 35661203 0 100%
slowpath runs: 140542396 36.38% 100 0.00% 100%
fastpath runs: 9509789 2.51% N/A
id updates: 176203599 45.62% 9087994 2.35% 95%
cs checks: 175587856 45.46% 4728394 1.22% 98%
cs cleared: 172359544 98.16% 1319307 27.90% 99%
cs fixup: 3228312 1.84% 3409087 72.10%
The 'cs cleared' and 'cs fixup' percentages are not relative to the exit to
user invocations, they are relative to the actual 'cs check' invocations.
While some of this could have been avoided in the original code, like the
obvious clearing of CS when it's already clear, the main problem of going
through TIF_NOTIFY_RESUME cannot be solved. In some workloads the RSEQ
notify handler is invoked more than once before going out to user
space. Doing this once when everything has stabilized is the only solution
to avoid this.
The initial attempt to completely decouple it from the TIF work turned out
to be suboptimal for workloads, which do a lot of quick and short system
calls. Even if the fast path decision is only 4 instructions (including a
conditional branch), this adds up quickly and becomes measurable when the
rate for actually having to handle rseq is in the low single digit
percentage range of user/kernel transitions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084307.701201365@linutronix.de
Implement the actual logic for handling RSEQ updates in a fast path after
handling the TIF work and at the point where the task is actually returning
to user space.
This is the right point to do that because at this point the CPU and the MM
CID are stable and cannot longer change due to yet another reschedule.
That happens when the task is handling it via TIF_NOTIFY_RESUME in
resume_user_mode_work(), which is invoked from the exit to user mode work
loop.
The function is invoked after the TIF work is handled and runs with
interrupts disabled, which means it cannot resolve page faults. It
therefore disables page faults and in case the access to the user space
memory faults, it:
- notes the fail in the event struct
- raises TIF_NOTIFY_RESUME
- returns false to the caller
The caller has to go back to the TIF work, which runs with interrupts
enabled and therefore can resolve the page faults. This happens mostly on
fork() when the memory is marked COW.
If the user memory inspection finds invalid data, the function returns
false as well and sets the fatal flag in the event struct along with
TIF_NOTIFY_RESUME. The slow path notify handler has to evaluate that flag
and terminate the task with SIGSEGV as documented.
The initial decision to invoke any of this is based on one flags in the
event struct: @sched_switch. The decision is in pseudo ASM:
load tsk::event::sched_switch
jnz inspect_user_space
mov $0, tsk::event::events
...
leave
So for the common case where the task was not scheduled out, this really
boils down to three instructions before going out if the compiler is not
completely stupid (and yes, some of them are).
If the condition is true, then it checks, whether CPU ID or MM CID have
changed. If so, then the CPU/MM IDs have to be updated and are thereby
cached for the next round. The update unconditionally retrieves the user
space critical section address to spare another user*begin/end() pair. If
that's not zero and tsk::event::user_irq is set, then the critical section
is analyzed and acted upon. If either zero or the entry came via syscall
the critical section analysis is skipped.
If the comparison is false then the critical section has to be analyzed
because the event flag is then only true when entry from user was by
interrupt.
This is provided without the actual hookup to let reviewers focus on the
implementation details. The hookup happens in the next step.
Note: As with quite some other optimizations this depends on the generic
entry infrastructure and is not enabled to be sucked into random
architecture implementations.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084307.638929615@linutronix.de
After removing the various condition bits earlier it turns out that one
extra information is needed to avoid setting event::sched_switch and
TIF_NOTIFY_RESUME unconditionally on every context switch.
The update of the RSEQ user space memory is only required, when either
the task was interrupted in user space and schedules
or
the CPU or MM CID changes in schedule() independent of the entry mode
Right now only the interrupt from user information is available.
Add an event flag, which is set when the CPU or MM CID or both change.
Evaluate this event in the scheduler to decide whether the sched_switch
event and the TIF bit need to be set.
It's an extra conditional in context_switch(), but the downside of
unconditionally handling RSEQ after a context switch to user is way more
significant. The utilized boolean logic minimizes this to a single
conditional branch.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084307.578058898@linutronix.de
Replace the whole logic with a new implementation, which is shared with
signal delivery and the upcoming exit fast path.
Contrary to the original implementation, this ignores invocations from
KVM/IO-uring, which invoke resume_user_mode_work() with the @regs argument
set to NULL.
The original implementation updated the CPU/Node/MM CID fields, but that
was just a side effect, which was addressing the problem that this
invocation cleared TIF_NOTIFY_RESUME, which in turn could cause an update
on return to user space to be lost.
This problem has been addressed differently, so that it's not longer
required to do that update before entering the guest.
That might be considered a user visible change, when the hosts thread TLS
memory is mapped into the guest, but as this was never intentionally
supported, this abuse of kernel internal implementation details is not
considered an ABI break.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084307.517640811@linutronix.de
Completely separate the signal delivery path from the notify handler as
they have different semantics versus the event handling.
The signal delivery only needs to ensure that the interrupted user context
was not in a critical section or the section is aborted before it switches
to the signal frame context. The signal frame context does not have the
original instruction pointer anymore, so that can't be handled on exit to
user space.
No point in updating the CPU/CID ids as they might change again before the
task returns to user space for real.
The fast path optimization, which checks for the 'entry from user via
interrupt' condition is only available for architectures which use the
generic entry code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084307.455429038@linutronix.de
Provide a new and straight forward implementation to set the IDs (CPU ID,
Node ID and MM CID), which can be later inlined into the fast path.
It does all operations in one scoped_user_rw_access() section and retrieves
also the critical section member (rseq::cs_rseq) from user space to avoid
another user..begin/end() pair. This is in preparation for optimizing the
fast path to avoid extra work when not required.
On rseq registration set the CPU ID fields to RSEQ_CPU_ID_UNINITIALIZED and
node and MM CID to zero. That's the same as the kernel internal reset
values. That makes the debug validation in the exit code work correctly on
the first exit to user space.
Use it to replace the whole related zoo in rseq.c
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084307.393972266@linutronix.de
Provide a straight forward implementation to check for and eventually
clear/fixup critical sections in user space.
The non-debug version does only the minimal sanity checks and aims for
efficiency.
There are two attack vectors, which are checked for:
1) An abort IP which is in the kernel address space. That would cause at
least x86 to return to kernel space via IRET.
2) A rogue critical section descriptor with an abort IP pointing to some
arbitrary address, which is not preceded by the RSEQ signature.
If the section descriptors are invalid then the resulting misbehaviour of
the user space application is not the kernels problem.
The kernel provides a run-time switchable debug slow path, which implements
the full zoo of checks including termination of the task when one of the
gazillion conditions is not met.
Replace the zoo in rseq.c with it and invoke it from the TIF_NOTIFY_RESUME
handler. Move the remainders into the CONFIG_DEBUG_RSEQ section, which will
be replaced and removed in a subsequent step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084307.151465632@linutronix.de
In preparation for a major rewrite of this code, provide a data structure
for rseq management.
Put all the rseq related data into it (except for the debug part), which
allows to simplify fork/execve by using memset() and memcpy() instead of
adding new fields to initialize over and over.
Create a storage struct for event management as well and put the
sched_switch event and a indicator for RSEQ on a task into it as a
start. That uses a union, which allows to mask and clear the whole lot
efficiently.
The indicators are explicitly not a bit field. Bit fields generate abysmal
code.
The boolean members are defined as u8 as that actually guarantees that it
fits. There seem to be strange architecture ABIs which need more than 8
bits for a boolean.
The has_rseq member is redundant vs. task::rseq, but it turns out that
boolean operations and quick checks on the union generate better code than
fiddling with separate entities and data types.
This struct will be extended over time to carry more information.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084306.527086690@linutronix.de
Hypervisors invoke resume_user_mode_work() before entering the guest, which
clears TIF_NOTIFY_RESUME. The @regs argument is NULL as there is no user
space context available to them, so the rseq notify handler skips
inspecting the critical section, but updates the CPU/MM CID values
unconditionally so that the eventual pending rseq event is not lost on the
way to user space.
This is a pointless exercise as the task might be rescheduled before
actually returning to user space and it creates unnecessary work in the
vcpu_run() loops.
It's way more efficient to ignore that invocation based on @regs == NULL
and let the hypervisors re-raise TIF_NOTIFY_RESUME after returning from the
vcpu_run() loop before returning from the ioctl().
This ensures that a pending RSEQ update is not lost and the IDs are updated
before returning to user space.
Once the RSEQ handling is decoupled from TIF_NOTIFY_RESUME, this turns into
a NOOP.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://patch.msgid.link/20251027084306.399495855@linutronix.de
Since commit 0190e4198e ("rseq: Deprecate RSEQ_CS_FLAG_NO_RESTART_ON_*
flags") the bits in task::rseq_event_mask are meaningless and just extra
work in terms of setting them individually.
Aside of that the only relevant point where an event has to be raised is
context switch. Neither the CPU nor MM CID can change without going through
a context switch.
Collapse them all into a single boolean which simplifies the code a lot and
remove the pointless invocations which have been sprinkled all over the
place for no value.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084306.336978188@linutronix.de
The RSEQ critical section mechanism only clears the event mask when a
critical section is registered, otherwise it is stale and collects
bits.
That means once a critical section is installed the first invocation of
that code when TIF_NOTIFY_RESUME is set will abort the critical section,
even when the TIF bit was not raised by the rseq preempt/migrate/signal
helpers.
This also has a performance implication because TIF_NOTIFY_RESUME is a
multiplexing TIF bit, which is utilized by quite some infrastructure. That
means every invocation of __rseq_notify_resume() goes unconditionally
through the heavy lifting of user space access and consistency checks even
if there is no reason to do so.
Keeping the stale event mask around when exiting to user space also
prevents it from being utilized by the upcoming time slice extension
mechanism.
Avoid this by reading and clearing the event mask before doing the user
space critical section access with interrupts or preemption disabled, which
ensures that the read and clear operation is CPU local atomic versus
scheduling and the membarrier IPI.
This is correct as after re-enabling interrupts/preemption any relevant
event will set the bit again and raise TIF_NOTIFY_RESUME, which makes the
user space exit code take another round of TIF bit clearing.
If the event mask was non-zero, invoke the slow path. On debug kernels the
slow path is invoked unconditionally and the result of the event mask
evaluation is handed in.
Add a exit path check after the TIF bit loop, which validates on debug
kernels that the event mask is zero before exiting to user space.
While at it reword the convoluted comment why the pt_regs pointer can be
NULL under certain circumstances.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251027084306.022571576@linutronix.de
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
Pull power management fixes from Rafael Wysocki:
"These fix three regressions, two recent ones and one introduced during
the 6.17 development cycle:
- Add an exit latency check to the menu cpuidle governor in the case
when it considers using a real idle state instead of a polling one
to address a performance regression (Rafael Wysocki)
- Revert an attempted cleanup of a system suspend code path that
introduced a regression elsewhere (Samuel Wu)
- Allow pm_restrict_gfp_mask() to be called multiple times in a row
and adjust pm_restore_gfp_mask() accordingly to avoid having to
play nasty games with these calls during hibernation (Rafael
Wysocki)"
* tag 'pm-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Allow pm_restrict_gfp_mask() stacking
cpuidle: governors: menu: Select polling state in some more cases
Revert "PM: sleep: Make pm_wakeup_clear() call more clear"
Merge a cpuidle fix and two fixes related to system sleep for 6.18-rc4:
- Add an exit latency check to the menu cpuidle governor in the case
when it considers using a real idle state instead of a polling one to
address a performance regression (Rafael Wysocki)
- Revert an attempted cleanup of a system suspend code path that
introduced a regression elsewhere (Samuel Wu)
- Allow pm_restrict_gfp_mask() to be called multiple times in a row
and adjust pm_restore_gfp_mask() accordingly to avoid having to play
nasty games with these calls during hibernation (Rafael Wysocki)
* pm-cpuidle:
cpuidle: governors: menu: Select polling state in some more cases
* pm-sleep:
PM: sleep: Allow pm_restrict_gfp_mask() stacking
Revert "PM: sleep: Make pm_wakeup_clear() call more clear"
Allow pm_restrict_gfp_mask() to be called many times in a row to avoid
issues with calling dpm_suspend_start() when the GFP mask has been
already restricted.
Only the first invocation of pm_restrict_gfp_mask() will actually
restrict the GFP mask and the subsequent calls will warn if there is
a mismatch between the expected allowed GFP mask and the actual one.
Moreover, if pm_restrict_gfp_mask() is called many times in a row,
pm_restore_gfp_mask() needs to be called matching number of times in
a row to actually restore the GFP mask. Calling it when the GFP mask
has not been restricted will cause it to warn.
This is necessary for the GFP mask restriction starting in
hibernation_snapshot() to continue throughout the entire hibernation
flow until it completes or it is aborted (either by a wakeup event or
by an error).
Fixes: 449c9c0253 ("PM: hibernate: Restrict GFP mask in hibernation_snapshot()")
Fixes: 469d80a371 ("PM: hibernate: Fix hybrid-sleep")
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/linux-pm/20251025050812.421905-1-safinaskar@gmail.com/
Link: https://lore.kernel.org/linux-pm/20251028111730.2261404-1-safinaskar@gmail.com/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Mario Limonciello (AMD) <superm1@kernel.org>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/5935682.DvuYhMxLoT@rafael.j.wysocki
Pull sched_ext fixes from Tejun Heo:
- Fix scx_kick_pseqs corruption when multiple schedulers are loaded
concurrently
- Allocate scx_kick_cpus_pnt_seqs lazily using kvzalloc() to handle
systems with large CPU counts
- Defer queue_balance_callback() until after ops.dispatch to fix
callback ordering issues
- Sync error_irq_work before freeing scx_sched to prevent
use-after-free
- Mark scx_bpf_dsq_move_set_[slice|vtime]() with KF_RCU for proper RCU
protection
- Fix flag check for deferred callbacks
* tag 'sched_ext-for-6.18-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: fix flag check for deferred callbacks
sched_ext: Fix scx_kick_pseqs corruption on concurrent scheduler loads
sched_ext: Allocate scx_kick_cpus_pnt_seqs lazily using kvzalloc()
sched_ext: defer queue_balance_callback() until after ops.dispatch
sched_ext: Sync error_irq_work before freeing scx_sched
sched_ext: Mark scx_bpf_dsq_move_set_[slice|vtime]() with KF_RCU
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
Pull timer fix from Borislav Petkov:
- Do not create more than eight (max supported) AUX clocks sysfs
hierarchies
* tag 'timers_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping: Fix aux clocks sysfs initialization loop bound
Clang is not happy with set but unused variable (this is visible
with `make W=1` build:
kernel/sched/sched.h:3744:18: error: variable 'cpumask' set but not used [-Werror,-Wunused-but-set-variable]
It seems like the variable was never used along with the assignment
that does not have side effects as far as I can see. Remove those
altogether.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull tracing fixes from Steven Rostedt:
"A couple of fixes for Runtime Verification:
- A bug caused a kernel panic when reading enabled_monitors was
reported.
Change callback functions to always use list_head iterators and by
doing so, fix the wrong pointer that was leading to the panic.
- The rtapp/pagefault monitor relies on the MMU to be present
(pagefaults exist) but that was not enforced via kconfig, leading
to potential build errors on systems without an MMU.
Add that kconfig dependency"
* tag 'trace-rv-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Make rtapp/pagefault monitor depends on CONFIG_MMU
rv: Fully convert enabled_monitors to use list_head as iterator
Pull hotfixes from Andrew Morton:
"17 hotfixes. 12 are cc:stable and 14 are for MM.
There's a two-patch DAMON series from SeongJae Park which addresses a
missed check and possible memory leak. Apart from that it's all
singletons - please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-10-22-12-43' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
csky: abiv2: adapt to new folio flags field
mm/damon/core: use damos_commit_quota_goal() for new goal commit
mm/damon/core: fix potential memory leak by cleaning ops_filter in damon_destroy_scheme
hugetlbfs: move lock assertions after early returns in huge_pmd_unshare()
vmw_balloon: indicate success when effectively deflating during migration
mm/damon/core: fix list_add_tail() call on damon_call()
mm/mremap: correctly account old mapping after MREMAP_DONTUNMAP remap
mm: prevent poison consumption when splitting THP
ocfs2: clear extent cache after moving/defragmenting extents
mm: don't spin in add_stack_record when gfp flags don't allow
dma-debug: don't report false positives with DMA_BOUNCE_UNALIGNED_KMALLOC
mm/damon/sysfs: dealloc commit test ctx always
mm/damon/sysfs: catch commit test ctx alloc failure
hung_task: fix warnings caused by unaligned lock pointers
Matteo reported hitting the assert_list_leaf_cfs_rq() warning from
enqueue_task_fair() post commit fe8d238e64 ("sched/fair: Propagate
load for throttled cfs_rq") which transitioned to using
cfs_rq_pelt_clock_throttled() check for leaf cfs_rq insertions in
propagate_entity_cfs_rq().
The "cfs_rq->pelt_clock_throttled" flag is used to indicate if the
hierarchy has its PELT frozen. If a cfs_rq's PELT is marked frozen, all
its descendants should have their PELT frozen too or weird things can
happen as a result of children accumulating PELT signals when the
parents have their PELT clock stopped.
Another side effect of this is the loss of integrity of the leaf cfs_rq
list. As debugged by Aaron, consider the following hierarchy:
root(#)
/ \
A(#) B(*)
|
C <--- new cgroup
|
D <--- new cgroup
# - Already on leaf cfs_rq list
* - Throttled with PELT frozen
The newly created cgroups don't have their "pelt_clock_throttled" signal
synced with cgroup B. Next, the following series of events occur:
1. online_fair_sched_group() for cgroup D will call
propagate_entity_cfs_rq(). (Same can happen if a throttled task is
moved to cgroup C and enqueue_task_fair() returns early.)
propagate_entity_cfs_rq() adds the cfs_rq of cgroup C to
"rq->tmp_alone_branch" since its PELT clock is not marked throttled
and cfs_rq of cgroup B is not on the list.
cfs_rq of cgroup B is skipped since its PELT is throttled.
root cfs_rq already exists on cfs_rq leading to
list_add_leaf_cfs_rq() returning early.
The cfs_rq of cgroup C is left dangling on the
"rq->tmp_alone_branch".
2. A new task wakes up on cgroup A. Since the whole hierarchy is already
on the leaf cfs_rq list, list_add_leaf_cfs_rq() keeps returning early
without any modifications to "rq->tmp_alone_branch".
The final assert_list_leaf_cfs_rq() in enqueue_task_fair() sees the
dangling reference to cgroup C's cfs_rq in "rq->tmp_alone_branch".
!!! Splat !!!
Syncing the "pelt_clock_throttled" indicator with parent cfs_rq is not
enough since the new cfs_rq is not yet enqueued on the hierarchy. A
dequeue on other subtree on the throttled hierarchy can freeze the PELT
clock for the parent hierarchy without setting the indicators for this
newly added cfs_rq which was never enqueued.
Since there are no tasks on the new hierarchy, start a cfs_rq on a
throttled hierarchy with its PELT clock throttled. The first enqueue, or
the distribution (whichever happens first) will unfreeze the PELT clock
and queue the cfs_rq on the leaf cfs_rq list.
While at it, add an assert_list_leaf_cfs_rq() in
propagate_entity_cfs_rq() to catch such cases in the future.
Closes: https://lore.kernel.org/lkml/58a587d694f33c2ea487c700b0d046fa@codethink.co.uk/
Fixes: e1fad12dcb ("sched/fair: Switch to task based throttle model")
Reported-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Suggested-by: Aaron Lu <ziqianlu@bytedance.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Aaron Lu <ziqianlu@bytedance.com>
Tested-by: Aaron Lu <ziqianlu@bytedance.com>
Tested-by: Matteo Martelli <matteo.martelli@codethink.co.uk>
Link: https://patch.msgid.link/20251021053522.37583-1-kprateek.nayak@amd.com
The loop in tk_aux_sysfs_init() uses `i <= MAX_AUX_CLOCKS` as the
termination condition, which results in 9 iterations (i=0 to 8) when
MAX_AUX_CLOCKS is defined as 8. However, the kernel is designed to support
only up to 8 auxiliary clocks.
This off-by-one error causes the creation of a 9th sysfs entry that exceeds
the intended auxiliary clock range.
Fix the loop bound to use `i < MAX_AUX_CLOCKS` to ensure exactly 8
auxiliary clock entries are created, matching the design specification.
Fixes: 7b95663a3d ("timekeeping: Provide interface to control auxiliary clocks")
Signed-off-by: Haofeng Li <lihaofeng@kylinos.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/tencent_2376993D9FC06A3616A4F981B3DE1C599607@qq.com
Pull scheduler fixes from Borislav Petkov:
- Make sure the check for lost pelt idle time is done unconditionally
to have correct lost idle time accounting
- Stop the deadline server task before a CPU goes offline
* tag 'sched_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Fix pelt lost idle time detection
sched/deadline: Stop dl_server before CPU goes offline
Pull perf fixes from Borislav Petkov:
- Make sure perf reporting works correctly in setups using
overlayfs or FUSE
- Move the uprobe optimization to a better location logically
* tag 'perf_urgent_for_v6.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix MMAP2 event device with backing files
perf/core: Fix MMAP event path names with backing files
perf/core: Fix address filter match with backing files
uprobe: Move arch_uprobe_optimize right after handlers execution
When scheduling the deferred balance callbacks, check SCX_RQ_BAL_CB_PENDING
instead of SCX_RQ_BAL_PENDING. This way schedule_deferred() properly tests
whether there is already a pending request for queue_balance_callback() to
be invoked at the end of .balance().
Fixes: a8ad873113 ("sched_ext: defer queue_balance_callback() until after ops.dispatch")
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
