There is something wrong with ovs_drop_reasons. ovs_drop_reasons[0] is
"OVS_DROP_LAST_ACTION", but OVS_DROP_LAST_ACTION == __OVS_DROP_REASON + 1,
which means that ovs_drop_reasons[1] should be "OVS_DROP_LAST_ACTION".
And as Adrian tested, without the patch, adding flow to drop packets
results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:19:17 2024 859853461 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_ACTION_ERROR
With the patch, the same results in:
drop at: do_execute_actions+0x197/0xb20 [openvsw (0xffffffffc0db6f97)
origin: software
input port ifindex: 8
timestamp: Tue Aug 20 10:16:13 2024 475856608 nsec
protocol: 0x800
length: 98
original length: 98
drop reason: OVS_DROP_LAST_ACTION
Fix this by initializing ovs_drop_reasons with index.
Fixes: 9d802da40b ("net: openvswitch: add last-action drop reason")
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Tested-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Adrian Moreno <amorenoz@redhat.com>
Link: https://patch.msgid.link/20240821123252.186305-1-dongml2@chinatelecom.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Vnhf
-----END PGP SIGNATURE-----
Merge tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 disable BH when collecting stats via hardware offload to ensure
concurrent updates from packet path do not result in losing stats.
From Sebastian Andrzej Siewior.
Patch #2 uses write seqcount to reset counters serialize against reader.
Also from Sebastian Andrzej Siewior.
Patch #3 ensures vlan header is in place before accessing its fields,
according to KMSAN splat triggered by syzbot.
* tag 'nf-24-08-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: flowtable: validate vlan header
netfilter: nft_counter: Synchronize nft_counter_reset() against reader.
netfilter: nft_counter: Disable BH in nft_counter_offload_stats().
====================
Link: https://patch.msgid.link/20240822101842.4234-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sean Anderson says:
====================
net: xilinx: axienet: Multicast fixes and improvements [part]
====================
First two patches of the series which are fixes.
Link: https://patch.msgid.link/20240822154059.1066595-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a multicast address is removed but there are still some multicast
addresses, that address would remain programmed into the frame filter.
Fix this by explicitly setting the enable bit for each filter.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If promiscuous mode is disabled when there are fewer than four multicast
addresses, then it will not be reflected in the hardware. Fix this by
always clearing the promiscuous mode flag even when we program multicast
addresses.
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This typo in scripts/Makefile.build has been present for more than 20
years. It was accidentally copy-pasted to other scripts/Makefile.* files.
Fix them all.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
This driver only appears to have received sporadic clean-ups, typically
part of some tree-wide activity, and fixes for quite some time. And
according to the maintainer, Guo-Fu Tseng, the device has been EOLed for
a long time (see Link).
Accordingly, it seems appropriate to mark this driver as odd fixes.
Cc: Moon Yeounsu <yyyynoom@gmail.com>
Cc: Guo-Fu Tseng <cooldavid@cooldavid.org>
Link: https://lore.kernel.org/netdev/20240805003139.M94125@cooldavid.org/
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" or
"skbuff" in their name.
This patch adds a number of such files to the NETWORKING DRIVERS
and NETWORKING [GENERAL] sections.
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This aims to add limited globs to improve the coverage of header files
in the NETWORKING DRIVERS and NETWORKING [GENERAL] sections.
It is done so in a minimal way to exclude overlap with other sections.
And so as not to require "X" entries to exclude files otherwise
matched by these new globs.
While imperfect, due to it's limited nature, this does extend coverage
of header files by these sections. And aims to automatically cover
new files that seem very likely belong to these sections.
The include/linux/netdev* glob (both sections)
+ Subsumes the entries for:
- include/linux/netdevice.h
+ Extends the sections to cover
- include/linux/netdevice_xmit.h
- include/linux/netdev_features.h
The include/uapi/linux/netdev* globs: (both sections)
+ Subsumes the entries for:
- include/linux/netdevice.h
+ Extends the sections to cover
- include/linux/netdev.h
The include/linux/skbuff* glob (NETWORKING [GENERAL] section only):
+ Subsumes the entry for:
- include/linux/skbuff.h
+ Extends the section to cover
- include/linux/skbuff_ref.h
A include/uapi/linux/net_* glob was not added to the NETWORKING [GENERAL]
section. Although it would subsume the entry for
include/uapi/linux/net_namespace.h, which is fine, it would also extend
coverage to:
- include/uapi/linux/net_dropmon.h, which belongs to the
NETWORK DROP MONITOR section
- include/uapi/linux/net_tstamp.h which, as per an earlier patch in this
series, belongs to the SOCKET TIMESTAMPING section
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is part of an effort to assign a section in MAINTAINERS to header
files that relate to Networking. In this case the files with "net" in
their name.
It seems that sonet.h is included in ATM related source files,
and thus that ATM is the most relevant section for these files.
Cc: Chas Williams <3chas3@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Let the kememdup_array() take care about multiplication and possible
overflows.
Signed-off-by: Yu Jiaoliang <yujiaoliang@vivo.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821081447.12430-1-yujiaoliang@vivo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
GDM1 port on EN7581 SoC is connected to the lan dsa switch.
GDM{2,3,4} can be used as wan port connected to an external
phy module. Configure hw mac address registers according to the port id.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20240821-airoha-eth-wan-mac-addr-v2-1-8706d0cd6cd5@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some CPT AF registers are per LF and others are global. Translation
of PF/VF local LF slot number to actual LF slot number is required
only for accessing perf LF registers. CPT AF global registers access
do not require any LF slot number. Also, there is no reason CPT
PF/VF to know actual lf's register offset.
Without this fix microcode loading will fail, VFs cannot be created
and hardware is not usable.
Fixes: bc35e28af7 ("octeontx2-af: replace cpt slot with lf id on reg write")
Signed-off-by: Bharat Bhushan <bbhushan2@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240821070558.1020101-1-bbhushan2@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current implementation incorrectly sets the mode bit of the PHY chip.
Bit 15 (RTL8211F_LEDCR_MODE) should not be shifted together with the
configuration nibble of a LED- it should be set independently of the
index of the LED being configured.
As a consequence, the RTL8211F LED control is actually operating in Mode A.
Fix the error by or-ing final register value to write with a const-value of
RTL8211F_LEDCR_MODE, thus setting Mode bit explicitly.
Fixes: 17784801d8 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Sava Jakovljev <savaj@meyersound.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/PAWP192MB21287372F30C4E55B6DF6158C38E2@PAWP192MB2128.EURP192.PROD.OUTLOOK.COM
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A few tests check if nettest exists in the $PATH before adding
$PWD to $PATH and re-checking. They don't discard stderr on
the first check (and nettest is built as part of selftests,
so it's pretty normal for it to not be available in system $PATH).
This leads to output noise:
which: no nettest in (/home/virtme/tools/fs/bin:/home/virtme/tools/fs/sbin:/home/virtme/tools/fs/usr/bin:/home/virtme/tools/fs/usr/sbin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
Add a common helper for the check which does silence stderr.
There is another small functional change hiding here, because pmtu.sh
and fib_rule_tests.sh used to return from the test case rather than
completely exit. Building nettest is not hard, there should be no need
to maintain the ability to selectively skip cases in its absence.
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240821012227.1398769-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MAC only has add the TX delay and it can not be modified.
MAC and PHY are both set the TX delay cause transmission problems.
So just disable TX delay in PHY, when use rgmii to attach to
external phy, set PHY_INTERFACE_MODE_RGMII_RXID to phy drivers.
And it is does not matter to internal phy.
Fixes: bc2426d74a ("net: ngbe: convert phylib to phylink")
Signed-off-by: Mengyuan Lou <mengyuanlou@net-swift.com>
Cc: stable@vger.kernel.org # 6.3+
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E6759CF1387CF84C+20240820030425.93003-1-mengyuanlou@net-swift.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Ensure there is sufficient room to access the protocol field of the
VLAN header, validate it once before the flowtable lookup.
=====================================================
BUG: KMSAN: uninit-value in nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
nf_flow_offload_inet_hook+0x45a/0x5f0 net/netfilter/nf_flow_table_inet.c:32
nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline]
nf_hook_slow+0xf4/0x400 net/netfilter/core.c:626
nf_hook_ingress include/linux/netfilter_netdev.h:34 [inline]
nf_ingress net/core/dev.c:5440 [inline]
Fixes: 4cd91f7c29 ("netfilter: flowtable: add vlan support")
Reported-by: syzbot+8407d9bb88cd4c6bf61a@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Justin Iurman says:
====================
net: ipv6: ioam6: introduce tunsrc
This series introduces a new feature called "tunsrc" (just like seg6
already does).
v3:
- address Jakub's comments
v2:
- add links to performance result figures (see patch#2 description)
- move the ipv6_addr_any() check out of the datapath
====================
Link: https://patch.msgid.link/20240817131818.11834-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch provides a new feature (i.e., "tunsrc") for the tunnel (i.e.,
"encap") mode of ioam6. Just like seg6 already does, except it is
attached to a route. The "tunsrc" is optional: when not provided (by
default), the automatic resolution is applied. Using "tunsrc" when
possible has a benefit: performance. See the comparison:
- before (= "encap" mode): https://ibb.co/bNCzvf7
- after (= "encap" mode with "tunsrc"): https://ibb.co/PT8L6yq
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch prepares the next one by correcting the alignment of some
lines.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-20 (ice)
This series contains updates to ice driver only.
Maciej fixes issues with Rx data path on architectures with
PAGE_SIZE >= 8192; correcting page reuse usage and calculations for
last offset and truesize.
Michal corrects assignment of devlink port number to use PF id.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: use internal pf id instead of function number
ice: fix truesize operations for PAGE_SIZE >= 8192
ice: fix ICE_LAST_OFFSET formula
ice: fix page reuse when PAGE_SIZE is over 8k
====================
Link: https://patch.msgid.link/20240820215620.1245310-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the parsing code generator assumes that the yaml
specification file name and the main 'name' attribute carried
inside correspond, that is the field is the c-name representation
of the file basename.
The above assumption held true within the current tree, but will be
hopefully broken soon by the upcoming net shaper specification.
Additionally, it makes the field 'name' itself useless.
Lift the assumption, always computing the generated include file
name from the generated c file name.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/24da5a3596d814beeb12bd7139a6b4f89756cc19.1724165948.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sean Anderson says:
====================
net: xilinx: axienet: Add statistics support
Add support for hardware statistics counters (if they are enabled) in
the AXI Ethernet driver. Unfortunately, the implementation is
complicated a bit since the hardware might only support 32-bit counters.
====================
Link: https://patch.msgid.link/20240820175343.760389-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reading the statistics counters, if they are enabled.
The counters may be 64-bit, but we can't detect this statically as
there's no ability bit for it and the counters are read-only. Therefore,
we assume the counters are 32-bits by default. To ensure we don't miss
an overflow, we read all counters at 13-second intervals. This should be
often enough to ensure the bytes counters don't wrap at 2.5 Gbit/s.
Another complication is that the counters may be reset when the device
is reset (depending on configuration). To ensure the counters persist
across link up/down (including suspend/resume), we maintain our own
versions along with the last counter value we saw. Because we might wait
up to 100 ms for the reset to complete, we use a mutex to protect
writing hw_stats. We can't sleep in ndo_get_stats64, so we use a seqlock
to protect readers.
We don't bother disabling the refresh work when we detect 64-bit
counters. This is because the reset issue requires us to read
hw_stat_base and reset_in_progress anyway, which would still require the
seqcount. And I don't think skipping the task is worth the extra
bookkeeping.
We can't use the byte counters for either get_stats64 or
get_eth_mac_stats. This is because the byte counters include everything
in the frame (destination address to FCS, inclusive). But
rtnl_link_stats64 wants bytes excluding the FCS, and
ethtool_eth_mac_stats wants to exclude the L2 overhead (addresses and
length/type). It might be possible to calculate the byte values Linux
expects based on the frame counters, but I think it is simpler to use
the existing software counters.
get_ethtool_stats is implemented for nonstandard statistics. This
includes the aforementioned byte counters, VLAN and PFC frame
counters, and user-defined (e.g. with custom RTL) counters.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20240820175343.760389-3-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Receive Frame Rejected interrupt is asserted whenever there was a
receive error (bad FCS, bad length, etc.) or whenever the frame was
dropped due to a mismatched address. So this is really a combination of
rx_otherhost_dropped, rx_length_errors, rx_frame_errors, and
rx_crc_errors. Mismatched addresses are common and aren't really errors
at all (much like how fragments are normal on half-duplex links). To
avoid confusion, report these events as rx_dropped. This better
reflects what's going on: the packet was received by the MAC but dropped
before being processed.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://patch.msgid.link/20240820175343.760389-2-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding the NAPI pointer to struct netdev_queue made it grow into another
cacheline, even though there was 44 bytes of padding available.
The struct was historically grouped as follows:
/* read-mostly stuff (align) */
/* ... random control path fields ... */
/* write-mostly stuff (align) */
/* ... 40 byte hole ... */
/* struct dql (align) */
It seems that people want to add control path fields after
the read only fields. struct dql looks pretty innocent
but it forces its own alignment and nothing indicates that
there is a lot of empty space above it.
Move dql above the xmit_lock. This shifts the empty space
to the end of the struct rather than in the middle of it.
Move two example fields there to set an example.
Hopefully people will now add new fields at the end of
the struct. A lot of the read-only stuff is also control
path-only, but if we move it all we'll have another hole
in the middle.
Before:
/* size: 384, cachelines: 6, members: 16 */
/* sum members: 284, holes: 3, sum holes: 100 */
After:
/* size: 320, cachelines: 5, members: 16 */
/* sum members: 284, holes: 1, sum holes: 8 */
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240820205119.1321322-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
ipv6: fix possible UAF in output paths
First patch fixes an issue spotted by syzbot, and the two
other patches fix error paths after skb_expand_head()
adoption.
====================
Link: https://patch.msgid.link/20240820160859.3786976-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If skb_expand_head() returns NULL, skb has been freed
and the associated dst/idev could also have been freed.
We must use rcu_read_lock() to prevent a possible UAF.
Fixes: 0c9f227bee ("ipv6: use skb_expand_head in ip6_xmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If skb_expand_head() returns NULL, skb has been freed
and associated dst/idev could also have been freed.
We need to hold rcu_read_lock() to make sure the dst and
associated idev are alive.
Fixes: 5796015fa9 ("ipv6: allocate enough headroom in ip6_finish_output2()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vasily Averin <vasily.averin@linux.dev>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240820160859.3786976-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netpoll_poll_disable() and netpoll_poll_enable() are only used
from core networking code, there is no need to export them.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240820162053.3870927-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BIT() is unsigned long but ->pu.flg_msk and ->pu.flg_val are u64 type.
On 32 bit systems, unsigned long is a u32 and the mismatch between u32
and u64 will break things for the high 32 bits.
Fixes: 9a4c07aaa0 ("ice: add parser execution main loop")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/ddc231a8-89c1-4ff4-8704-9198bcb41f8d@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
err varibale will be set everytime,like -ENOBUFS and in if (err < 0),
when code gets into this path. This check will just slowdown
the execution and that's all.
Signed-off-by: Xi Huang <xuiagnh@gmail.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20240820115442.49366-1-xuiagnh@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Source the ethtool library from the correct path and avoid the following
error:
./ethtool_lanes.sh: line 14: ./../../../net/forwarding/ethtool_lib.sh: No such file or directory
Fixes: 40d269c000 ("selftests: forwarding: Move several selftests")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/2112faff02e536e1ac14beb4c2be09c9574b90ae.1724150067.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240820075047.681223-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use scoped for_each_available_child_of_node_scoped() when iterating over
device nodes to make code a bit simpler.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240820074805.680674-1-ruanjinjie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Remove unnecessary flex-array member `data[]`, and with this fix
the following warnings:
drivers/nfc/pn533/usb.c:268:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/nfc/pn533/usb.c:275:38: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/ZsPw7+6vNoS651Cb@elsanto
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When assembling fraglist GSO packets, udp4_gro_complete does not set
skb->csum_start, which makes the extra validation in __udp_gso_segment fail.
Fixes: 89add40066 ("net: drop bad gso csum_start and offset in virtio_net_hdr")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240819150621.59833-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes:
- ISST: Fix an error-handling corner case.
- platform/surface: aggregator: Minor corner case fix and new HW support.
The following is an automated shortlog grouped by driver:
asus-wmi:
- Add quirk for ROG Ally X
ISST:
- Fix return value on last invalid resource
surface: aggregator:
- Fix warning when controller is destroyed in probe
surface: aggregator_registry:
- Add fan and thermal sensor support for Surface Laptop 5
- Add support for Surface Laptop 6
- Add support for Surface Laptop Go 3
- Add support for Surface Laptop Studio 2
- Add Support for Surface Pro 10
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZsWaDwAKCRBZrE9hU+XO
MRSzAQDvXc77garXWSvOxZgHgReoASYgeFHJar7V96VQTH76HQEA1qJ/8+SN8CAw
Voc10wW+FniTh3FY0f5rmgr8tPXh9Q0=
=zn/Q
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- ISST: Fix an error-handling corner case
- platform/surface: aggregator: Minor corner case fix and new HW
support
* tag 'platform-drivers-x86-v6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Fix return value on last invalid resource
platform/surface: aggregator: Fix warning when controller is destroyed in probe
platform/surface: aggregator_registry: Add support for Surface Laptop 6
platform/surface: aggregator_registry: Add fan and thermal sensor support for Surface Laptop 5
platform/surface: aggregator_registry: Add support for Surface Laptop Studio 2
platform/surface: aggregator_registry: Add support for Surface Laptop Go 3
platform/surface: aggregator_registry: Add Support for Surface Pro 10
platform/x86: asus-wmi: Add quirk for ROG Ally X
- Allow large folios on compressed inodes;
- Fix invalid memory accesses if z_erofs_gbuf_growsize()
partially fails;
- Two minor cleanups.
-----BEGIN PGP SIGNATURE-----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=gFZW
-----END PGP SIGNATURE-----
Merge tag 'erofs-for-6.11-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"As I mentioned in the merge window pull request, there is a regression
which could cause system hang due to page migration. The corresponding
fix landed upstream through MM tree last week (commit 2e6506e1c4:
"mm/migrate: fix deadlock in migrate_pages_batch() on large folios"),
therefore large folios can be safely allowed for compressed inodes and
stress tests have been running on my fleet for over 20 days without
any regression. Users have explicitly requested this for months, so
let's allow large folios for EROFS full cases now for wider testing.
Additionally, there is a fix which addresses invalid memory accesses
on a failure path triggered by fault injection and two minor cleanups
to simplify the codebase.
Summary:
- Allow large folios on compressed inodes
- Fix invalid memory accesses if z_erofs_gbuf_growsize() partially
fails
- Two minor cleanups"
* tag 'erofs-for-6.11-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix out-of-bound access when z_erofs_gbuf_growsize() partially fails
erofs: allow large folios for compressed files
erofs: get rid of check_layout_compatibility()
erofs: simplify readdir operation
WWAN device is programmed to boot in normal mode or fastboot mode,
when triggering a device reset through ACPI call or fastboot switch
command. Maintain state machine synchronization and reprobe logic
after a device reset.
The PCIe device reset triggered by several ways.
E.g.:
- fastboot: echo "fastboot_switching" > /sys/bus/pci/devices/${bdf}/t7xx_mode.
- reset: echo "reset" > /sys/bus/pci/devices/${bdf}/t7xx_mode.
- IRQ: PCIe device request driver to reset itself by an interrupt request.
Use pci_reset_function() as a generic way to reset device, save and
restore the PCIe configuration before and after reset device to ensure
the reprobe process.
Suggestion from Bjorn:
Link: https://lore.kernel.org/all/20230127133034.GA1364550@bhelgaas/
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=QWAI
-----END PGP SIGNATURE-----
Merge tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
- important reconnect fix
- fix for memcpy issues on mount
- two minor cleanup patches
* tag '6.11-rc4-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: Replace one-element arrays with flexible-array members
ksmbd: fix spelling mistakes in documentation
ksmbd: fix race condition between destroy_previous_session() and smb2 operations()
ksmbd: Use unsafe_memcpy() for ntlm_negotiate
Matthieu Baerts says:
====================
mptcp: pm: fix IDs not being reusable
Here are more fixes for the MPTCP in-kernel path-manager. In this
series, the fixes are around the endpoint IDs not being reusable for
on-going connections when re-creating endpoints with previously used IDs.
- Patch 1 fixes this case for endpoints being used to send ADD_ADDR.
Patch 2 validates this fix. The issue is present since v5.10.
- Patch 3 fixes this case for endpoints being used to establish new
subflows. Patch 4 validates this fix. The issue is present since v5.10.
- Patch 5 fixes this case when all endpoints are flushed. Patch 6
validates this fix. The issue is present since v5.13.
- Patch 7 removes a helper that is confusing, and introduced in v5.10.
It helps simplifying the next patches.
- Patch 8 makes sure a 'subflow' counter is only decremented when
removing a 'subflow' endpoint. Can be backported up to v5.13.
- Patch 9 is similar, but for a 'signal' counter. Can be backported up
to v5.10.
- Patch 10 checks the last max accepted ADD_ADDR limit before accepting
new ADD_ADDR. For v5.10 as well.
- Patch 11 removes a wrong restriction for the userspace PM, added
during a refactoring in v6.5.
- Patch 12 makes sure the fullmesh mode sets the ID 0 when a new subflow
using the source address of the initial subflow is created. Patch 13
covers this case. This issue is present since v5.15.
- Patch 14 avoid possible UaF when selecting an address from the
endpoints list.
====================
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-0-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
select_local_address() and select_signal_address() both select an
endpoint entry from the list inside an RCU protected section, but return
a reference to it, to be read later on. If the entry is dereferenced
after the RCU unlock, reading info could cause a Use-after-Free.
A simple solution is to copy the required info while inside the RCU
protected section to avoid any risk of UaF later. The address ID might
need to be modified later to handle the ID0 case later, so a copy seems
OK to deal with.
Reported-by: Paolo Abeni <pabeni@redhat.com>
Closes: https://lore.kernel.org/45cd30d3-7710-491c-ae4d-a1368c00beb1@redhat.com
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-14-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This case was not covered, and the wrong ID was set before the previous
commit.
The rest is not modified, it is just that it will increase the code
coverage.
The right address ID can be verified by looking at the packet traces. We
could automate that using Netfilter with some cBPF code for example, but
that's always a bit cryptic. Packetdrill seems better fitted for that.
Fixes: 4f49d63352 ("selftests: mptcp: add fullmesh testcases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-13-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reacting upon the reception of an ADD_ADDR, the in-kernel PM first
looks for fullmesh endpoints. If there are some, it will pick them,
using their entry ID.
It should set the ID 0 when using the endpoint corresponding to the
initial subflow, it is a special case imposed by the MPTCP specs.
Note that msk->mpc_endpoint_id might not be set when receiving the first
ADD_ADDR from the server. So better to compare the addresses.
Fixes: 1a0d6136c5 ("mptcp: local addresses fullmesh")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240819-net-mptcp-pm-reusing-id-v1-12-38035d40de5b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
