Fix smatch warning for sg_nents_for_len return value in Inside Secure
EIP93 driver.
The return value of sg_nents_for_len was assigned to an u32 and the
error was ignored and converted to a positive integer.
Rework the code to correctly handle the error from sg_nents_for_len to
mute smatch warning.
Fixes: 9739f5f93b ("crypto: eip93 - Add Inside Secure SafeXcel EIP-93 crypto engine support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The service parsing logic is used to parse the configuration string
provided by the user using the attribute qat/cfg_services in sysfs.
The logic relies on hard-coded strings. For example, the service
"sym;asym" is also replicated as "asym;sym".
This makes the addition of new services or service combinations
complex as it requires the addition of new hard-coded strings for all
possible combinations.
This commit addresses this issue by:
* reducing the number of internal service strings to only the basic
service representations.
* modifying the service parsing logic to analyze the service string
token by token instead of comparing a whole string with patterns.
* introducing the concept of a service mask where each service is
represented by a single bit.
* dividing the parsing logic into several functions to allow for code
reuse (e.g. by sysfs-related functions).
* introducing a new, device generation-specific function to verify
whether the requested service combination is supported by the
currently used device.
Signed-off-by: Małgorzata Mielnik <malgorzata.mielnik@intel.com>
Co-developed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use kmalloc_array() instead of kcalloc() because sg_init_table() already
sets the memory to zero. This avoids zeroing the memory twice.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Instead of having two entries for inside-secure in the top-level
Makefile, make it just a single one.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During encryption and decryption, user requests
must be checked first, if the specifications that
are not supported by the hardware are used, the
software computing is used for processing.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The hardware only supports authentication sizes
that are 4-byte aligned. Therefore, the driver
switches to software computation in this case.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
According to the HMAC RFC, the authentication key
can be 0 bytes, and the hardware can handle this
scenario. Therefore, remove the incorrect validation
for this case.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The request context virtio_crypto_{akcipher,sym}_request contains a
pointer to the [as]kcipher_request itself.
The pointer is superfluous as it can be calculated with container_of().
Drop the superfluous pointer.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The request context virtio_crypto_{akcipher,sym}_request contains a
pointer to the transform context virtio_crypto_[as]kcipher_ctx.
The pointer is superfluous as it can be calculated with the cheap
crypto_akcipher_reqtfm() + akcipher_tfm_ctx() and
crypto_skcipher_reqtfm() + crypto_skcipher_ctx() combos.
Drop the superfluous pointer.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
struct virtio_crypto_[as]kcipher_ctx contains a backpointer to struct
crypto_[as]kcipher which is superfluous in two ways:
First, it's not used anywhere. Second, the context is embedded into
struct crypto_tfm, so one could just use container_of() to get from the
context to crypto_tfm and from there to crypto_[as]kcipher.
Drop the superfluous backpointer.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When setting a public or private RSA key, the integer n is cached in the
transform context virtio_crypto_akcipher_ctx -- with the sole purpose of
calculating the key size from it in virtio_crypto_rsa_max_size().
It looks like this was copy-pasted from crypto/rsa.c.
Cache the key size directly instead of the integer n, thus simplifying
the code and reducing the memory footprint.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It seems the kernel-doc of virtcrypto_dev_start() was copied verbatim to
virtcrypto_dev_stop(). Fix it.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The XP10 algorithm is not supported by any QAT device.
Remove the definition of bit 7 (ICP_QAT_FW_COMP_20_CMD_XP10_COMPRESS)
and bit 8 (ICP_QAT_FW_COMP_20_CMD_XP10_DECOMPRESS) in the firmware
command id enum and rename them as reserved.
Those bits shall not be used in future.
Signed-off-by: Suman Kumar Chakraborty <suman.kumar.chakraborty@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Only the ECDH with NIST P-256 meets requirements.
The algorithm will be scheduled first for high-performance cores.
The key step is to config resv1 field of BD.
Signed-off-by: lizhi <lizhi206@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the ASP primary device check does not have support for PCI
domains, and, as a result, when the system is configured with PCI domains
(PCI segments) the wrong device can be selected as primary. This results
in commands submitted to the device timing out and failing. The device
check also relies on specific device and function assignments that may
not hold in the future.
Fix the primary ASP device check to include support for PCI domains and
to perform proper checking of the Bus/Device/Function positions.
Fixes: 2a6170dfe7 ("crypto: ccp: Add Platform Security Processor (PSP) device support")
Cc: stable@vger.kernel.org
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com> # QAT
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add support for the Inside Secure SafeXcel EIP-93 Crypto Engine used on
Mediatek MT7621 SoC and new Airoha SoC.
EIP-93 IP supports AES/DES/3DES ciphers in ECB/CBC and CTR modes as well as
authenc(HMAC(x), cipher(y)) using HMAC MD5, SHA1, SHA224 and SHA256.
EIP-93 provide regs to signal support for specific chipers and the
driver dynamically register only the supported one by the chip.
Signed-off-by: Richard van Schagen <vschagen@icloud.com>
Co-developed-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
The omap driver was using struct scatter_walk, but only to maintain an
offset, rather than iterating through the virtual addresses of the data
contained in the scatterlist which is what scatter_walk is intended for.
Make it just use a plain offset instead. This is simpler and avoids
using struct scatter_walk in a way that is not well supported.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
spum_cipher_req_init() assigns 'spu_hdr' to local 'ptr' variable and
later increments 'ptr' over specific fields like it was meant to point
to pieces of message for some purpose. However the code does not read
'ptr' at all thus this entire iteration over 'spu_hdr' seams pointless.
Reported by clang W=1 build:
drivers/crypto/bcm/spu.c:839:6: error: variable 'ptr' set but not used [-Werror,-Wunused-but-set-variable]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On the HiSilicon accelerators drivers, the PF/VFs driver can send messages
to the VFs/PF by writing hardware registers, and the VFs/PF driver receives
messages from the PF/VFs by reading hardware registers. To support this
feature, a new version id is added, different communication mechanism are
used based on different version id.
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
With the latest mm-unstable, setting the iaa_crypto sync_mode to 'async'
causes crypto testmgr.c test_acomp() failure and dmesg call traces, and
zswap being unable to use 'deflate-iaa' as a compressor:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
[ 255.271030] zswap: compressor deflate-iaa not available
[ 369.960673] INFO: task cryptomgr_test:4889 blocked for more than 122 seconds.
[ 369.970127] Not tainted 6.13.0-rc1-mm-unstable-12-16-2024+ #324
[ 369.977411] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 369.986246] task:cryptomgr_test state:D stack:0 pid:4889 tgid:4889 ppid:2 flags:0x00004000
[ 369.986253] Call Trace:
[ 369.986256] <TASK>
[ 369.986260] __schedule+0x45c/0xfa0
[ 369.986273] schedule+0x2e/0xb0
[ 369.986277] schedule_timeout+0xe7/0x100
[ 369.986284] ? __prepare_to_swait+0x4e/0x70
[ 369.986290] wait_for_completion+0x8d/0x120
[ 369.986293] test_acomp+0x284/0x670
[ 369.986305] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986312] alg_test_comp+0x263/0x440
[ 369.986315] ? sched_balance_newidle+0x259/0x430
[ 369.986320] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986323] alg_test.part.27+0x103/0x410
[ 369.986326] ? __schedule+0x464/0xfa0
[ 369.986330] ? __pfx_cryptomgr_test+0x10/0x10
[ 369.986333] cryptomgr_test+0x20/0x40
[ 369.986336] kthread+0xda/0x110
[ 369.986344] ? __pfx_kthread+0x10/0x10
[ 369.986346] ret_from_fork+0x2d/0x40
[ 369.986355] ? __pfx_kthread+0x10/0x10
[ 369.986358] ret_from_fork_asm+0x1a/0x30
[ 369.986365] </TASK>
This happens because the only async polling without interrupts that
iaa_crypto currently implements is with the 'sync' mode. With 'async',
iaa_crypto calls to compress/decompress submit the descriptor and return
-EINPROGRESS, without any mechanism in the driver to poll for
completions. Hence callers such as test_acomp() in crypto/testmgr.c or
zswap, that wrap the calls to crypto_acomp_compress() and
crypto_acomp_decompress() in synchronous wrappers, will block
indefinitely. Even before zswap can notice this problem, the crypto
testmgr.c's test_acomp() will fail and prevent registration of
"deflate-iaa" as a valid crypto acomp algorithm, thereby disallowing the
use of "deflate-iaa" as a zswap compress (zswap will fall-back to the
default compressor in this case).
To fix this issue, this patch modifies the iaa_crypto sync_mode set
function to treat 'async' equivalent to 'sync', so that the correct and
only supported driver async polling without interrupts implementation is
enabled, and zswap can use 'deflate-iaa' as the compressor.
Hence, with this patch, this is what will happen:
echo async > /sys/bus/dsa/drivers/crypto/sync_mode
cat /sys/bus/dsa/drivers/crypto/sync_mode
sync
There are no crypto/testmgr.c test_acomp() errors, no call traces and zswap
can use 'deflate-iaa' without any errors. The iaa_crypto documentation has
also been updated to mention this caveat with 'async' and what to expect
with this fix.
True iaa_crypto async polling without interrupts is enabled in patch
"crypto: iaa - Implement batch_compress(), batch_decompress() API in
iaa_crypto." [1] which is under review as part of the "zswap IAA compress
batching" patch-series [2]. Until this is merged, we would appreciate it if
this current patch can be considered for a hotfix.
[1]: https://patchwork.kernel.org/project/linux-mm/patch/20241221063119.29140-5-kanchana.p.sridhar@intel.com/
[2]: https://patchwork.kernel.org/project/linux-mm/list/?series=920084
Fixes: 09646c98d ("crypto: iaa - Add irq support for the crypto async interface")
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Commit ce8fd0500b ("crypto: qce - use __free() for a buffer that's
always freed") introduced a buggy use of __free(), which clang
rightfully points out:
drivers/crypto/qce/sha.c:365:3: error: cannot jump from this goto statement to its label
365 | goto err_free_ahash;
| ^
drivers/crypto/qce/sha.c:373:6: note: jump bypasses initialization of variable with __attribute__((cleanup))
373 | u8 *buf __free(kfree) = kzalloc(keylen + QCE_MAX_ALIGN_SIZE,
| ^
Jumping over a variable declared with the cleanup attribute does not
prevent the cleanup function from running; instead, the cleanup function
is called with an uninitialized value.
Moving the declaration back to the top function with __free() and a NULL
initialization would resolve the bug but that is really not much
different from the original code. Since the function is so simple and
there is no functional reason to use __free() here, just revert the
original change to resolve the issue.
Fixes: ce8fd0500b ("crypto: qce - use __free() for a buffer that's always freed")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/CA+G9fYtpAwXa5mUQ5O7vDLK2xN4t-kJoxgUe1ZFRT=AGqmLSRA@mail.gmail.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
init_ixp_crypto() calls of_parse_phandle_with_fixed_args() multiple
times, but does not release all the obtained refcounts. Fix it by adding
of_node_put() calls.
This bug was found by an experimental static analysis tool that I am
developing.
Fixes: 76f24b4f46 ("crypto: ixp4xx - Add device tree support")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the digest alg is HMAC-SHAx or another, the authsize may be less
than 4 bytes and mac_len of the BD is set to zero, the hardware considers
it a BD configuration error and reports a ras error, so the sec driver
needs to switch to software calculation in this case, this patch add a
check for it and remove unnecessary check that has been done by crypto.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the AEAD algorithm is used for encryption or decryption,
the input authentication length varies, the hardware needs to
obtain the input length to pass the integrity check verification.
Currently, the driver uses a fixed authentication length,which
causes decryption failure, so the length configuration is modified.
In addition, the step of setting the auth length is unnecessary,
so it was deleted from the setkey function.
Fixes: 2f072d75d1 ("crypto: hisilicon - Add aead support on SEC2")
Signed-off-by: Wenkai Lin <linwenkai6@hisilicon.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the driver for the Stream Processing Unit (SPU) on the Niagara 2.
Removing this driver allows removing the support for physical address
walks in skcipher_walk. That is a misfeature that is used only by this
driver and increases the overhead of the crypto API for everyone else.
There is little evidence that anyone cares about this driver. The
Niagara 2, a.k.a. the UltraSPARC T2, is a server CPU released in
2007. The SPU is also present on the SPARC T3, released in 2010.
However, the SPU went away in SPARC T4, released in 2012, which replaced
it with proper cryptographic instructions instead. These newer
instructions are supported by the kernel in arch/sparc/crypto/.
This driver was completely broken from (at least) 2015 to 2022, from
commit 8996eafdcb ("crypto: ahash - ensure statesize is non-zero") to
commit 76a4e87459 ("crypto: n2 - add missing hash statesize"), since
its probe function always returned an error before registering any
algorithms. Though, even with that obvious issue fixed, it is unclear
whether the driver now works correctly. E.g., there are no indications
that anyone has run the self-tests recently.
One bug report for this driver in 2017
(https://lore.kernel.org/r/nycvar.YFH.7.76.1712110214220.28416@n3.vanv.qr)
complained that it crashed the kernel while being loaded. The reporter
didn't seem to care about the functionality of the driver, but rather
just the fact that loading it crashed the kernel. In fact not until
2022 was the driver fixed to maybe actually register its algorithms with
the crypto API. The 2022 fix does have a Reported-by and Tested-by, but
that may similarly have been just about making the error messages go
away as opposed to someone actually wanting to use the driver.
As such, it seems appropriate to retire this driver in mainline.
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
As QCE is an order of magnitude slower than the ARMv8 Crypto Extensions
on the CPU, and is also less well tested, give it a lower priority.
Previously the QCE SHA algorithms had higher priority than the ARMv8 CE
equivalents, and the ciphers such as AES-XTS had the same priority which
meant the QCE versions were chosen if they happened to be loaded later.
Fixes: ec8f5d8f6f ("crypto: qce - Qualcomm crypto engine driver")
Cc: stable@vger.kernel.org
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Having switched to workqueue from tasklet, we are no longer limited to
atomic APIs and can now convert the spinlock to a mutex. This, along
with the conversion from tasklet to workqueue grants us ~15% improvement
in cryptsetup benchmarks for AES encryption.
While at it: use guards to simplify locking code.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use devm_clk_get_optional_enabled() to avoid having to enable the clocks
separately as well as putting the clocks in error path and the remove()
callback.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If we encounter an error when registering alorithms with the crypto
framework, we just bail out and don't unregister the ones we
successfully registered in prior iterations of the loop.
Add code that goes back over the algos and unregisters them before
returning an error from qce_register_algs().
Cc: stable@vger.kernel.org
Fixes: ec8f5d8f6f ("crypto: qce - Qualcomm crypto engine driver")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On iMX8DXL/QM/QXP(SECO) & iMX8ULP(ELE) SoCs, access to controller
region(CAAM page 0) is not permitted from non secure world.
use JobR's register space to access page 0 registers.
Fixes: 6a83830f64 ("crypto: caam - warn if blob_gen key is insecure")
Signed-off-by: Gaurav Jain <gaurav.jain@nxp.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The error detection of the data aggregation feature is separated from
the compression/decompression feature. This patch enables the error
detection and reporting of the data aggregation feature. When an
unrecoverable error occurs in the algorithm core, the device reports
the error to the driver, and the driver will reset the device.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The zip device adds data aggregation feature, data with the
same key can be combined.
This patch enables the device data aggregation feature.
New feature is called "hashagg" name and registered to
the uacce subsystem to allow applications to submit data
aggregation operations in user space.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The tegra_cmac_init or tegra_sha_init function may return an error when
memory is exhausted. It should not transfer the request when they return
an error.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Offset based on (id * size) is wrong for sqc and cqc.
(*sqc/*cqc + 1) can already offset sizeof(struct(Xqc)) length.
Fixes: 15f112f9ce ("crypto: hisilicon/debugfs - mask the unnecessary info from the dump")
Cc: <stable@vger.kernel.org>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
