It turns out that there are no platforms that have PCI but don't have an
MMU, so adding a Kconfig dependency on CONFIG_PCI simplifies build testing
kernels for those platforms a lot, and avoids a lot of inadvertent build
regressions.
Add a dependency for CONFIG_PCI and remove all the ones for PCI specific
device drivers that are currently marked not having it.
There are a few platforms that have an optional MMU, but they usually
cannot have PCI at all. The one exception is Coldfire MCF54xx, but this is
mainly for historic reasons, and anyone using those chips should really use
the MMU these days.
Link: https://lore.kernel.org/lkml/a41f1b20-a76c-43d8-8c36-f12744327a54@app.fastmail.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> # SCSI
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20250423202215.3315550-1-arnd@kernel.org
1) Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
2) The final cleanup of the hrtimer_init() to hrtimer_setup() conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline and
all new users are catched.
Doing this right before rc1 ensures that new code which is merged post rc1
is not introducing new instances of the original functionality.
-----BEGIN PGP SIGNATURE-----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=8Ftq
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A set of final cleanups for the timer subsystem:
- Convert all del_timer[_sync]() instances over to the new
timer_delete[_sync]() API and remove the legacy wrappers.
Conversion was done with coccinelle plus some manual fixups as
coccinelle chokes on scoped_guard().
- The final cleanup of the hrtimer_init() to hrtimer_setup()
conversion.
This has been delayed to the end of the merge window, so that all
patches which have been merged through other trees are in mainline
and all new users are catched.
Doing this right before rc1 ensures that new code which is merged post
rc1 is not introducing new instances of the original functionality"
* tag 'timers-cleanups-2025-04-06' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tracing/timers: Rename the hrtimer_init event to hrtimer_setup
hrtimers: Rename debug_init_on_stack() to debug_setup_on_stack()
hrtimers: Rename debug_init() to debug_setup()
hrtimers: Rename __hrtimer_init_sleeper() to __hrtimer_setup_sleeper()
hrtimers: Remove unnecessary NULL check in hrtimer_start_range_ns()
hrtimers: Make callback function pointer private
hrtimers: Merge __hrtimer_init() into __hrtimer_setup()
hrtimers: Switch to use __htimer_setup()
hrtimers: Delete hrtimer_init()
treewide: Convert new and leftover hrtimer_init() users
treewide: Switch/rename to timer_delete[_sync]()
bridge:
- tda998x: Select CONFIG_DRM_KMS_HELPER
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
xe:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
i915:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
adp:
- Fix error handling in plane setup
-----BEGIN PGP SIGNATURE-----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=P/sW
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Weekly fixes, mostly from the end of last week, this week was very
quiet, maybe you scared everyone away. It's mostly amdgpu, and xe,
with some i915, adp and bridge bits, since I think this is overly
quiet I'd expect rc2 to be a bit more lively.
bridge:
- tda998x: Select CONFIG_DRM_KMS_HELPER
amdgpu:
- Guard against potential division by 0 in fan code
- Zero RPM support for SMU 14.0.2
- Properly handle SI and CIK support being disabled
- PSR fixes
- DML2 fixes
- DP Link training fix
- Vblank fixes
- RAS fixes
- Partitioning fix
- SDMA fix
- SMU 13.0.x fixes
- Rom fetching fix
- MES fixes
- Queue reset fix
xe:
- Fix NULL pointer dereference on error path
- Add missing HW workaround for BMG
- Fix survivability mode not triggering
- Fix build warning when DRM_FBDEV_EMULATION is not set
i915:
- Bounds check for scalers in DSC prefill latency computation
- Fix build by adding a missing include
adp:
- Fix error handling in plane setup"
# -----BEGIN PGP SIGNATURE-----
* tag 'drm-next-2025-04-05' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/i2c: tda998x: select CONFIG_DRM_KMS_HELPER
drm/amdgpu/gfx12: fix num_mec
drm/amdgpu/gfx11: fix num_mec
drm/amd/pm: Add gpu_metrics_v1_8
drm/amdgpu: Prefer shadow rom when available
drm/amd/pm: Update smu metrics table for smu_v13_0_6
drm/amd/pm: Remove host limit metrics support
Remove unnecessary firmware version check for gc v9_4_2
drm/amdgpu: stop unmapping MQD for kernel queues v3
Revert "drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA"
drm/amdgpu: Parse all deferred errors with UMC aca handle
drm/amdgpu: Update ta ras block
drm/amdgpu: Add NPS2 to DPX compatible mode
drm/amdgpu: Use correct gfx deferred error count
drm/amd/display: Actually do immediate vblank disable
drm/amd/display: prevent hang on link training fail
Revert "drm/amd/display: dml2 soc dscclk use DPM table clk setting"
drm/amd/display: Increase vblank offdelay for PSR panels
drm/amd: Handle being compiled without SI or CIK support better
drm/amd/pm: Add zero RPM enabled OD setting support for SMU14.0.2
...
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry 116KHD024006,
Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do
firmware updates in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot / devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs
-----BEGIN PGP SIGNATURE-----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=oK/N
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"Outside of drm there are some rust patches from Danilo who maintains
that area in here, and some pieces for drm header check tests.
The major things in here are a new driver supporting the touchbar
displays on M1/M2, the nova-core stub driver which is just the vehicle
for adding rust abstractions and start developing a real driver inside
of.
xe adds support for SVM with a non-driver specific SVM core
abstraction that will hopefully be useful for other drivers, along
with support for shrinking for TTM devices. I'm sure xe and AMD
support new devices, but the pipeline depth on these things is hard to
know what they end up being in the marketplace!
uapi:
- add mediatek tiled fourcc
- add support for notifying userspace on device wedged
new driver:
- appletbdrm: support for Apple Touchbar displays on m1/m2
- nova-core: skeleton rust driver to develop nova inside off
firmware:
- add some rust firmware pieces
rust:
- add 'LocalModule' type alias
component:
- add helper to query bound status
fbdev:
- fbtft: remove access to page->index
media:
- cec: tda998x: import driver from drm
dma-buf:
- add fast path for single fence merging
tests:
- fix lockdep warnings
atomic:
- allow full modeset on connector changes
- clarify semantics of allow_modeset and drm_atomic_helper_check
- async-flip: support on arbitary planes
- writeback: fix UAF
- Document atomic-state history
format-helper:
- support ARGB8888 to ARGB4444 conversions
buddy:
- fix multi-root cleanup
ci:
- update IGT
dp:
- support extended wake timeout
- mst: fix RAD to string conversion
- increase DPCD eDP control CAP size to 5 bytes
- add DPCD eDP v1.5 definition
- add helpers for LTTPR transparent mode
panic:
- encode QR code according to Fido 2.2
scheduler:
- add parameter struct for init
- improve job peek/pop operations
- optimise drm_sched_job struct layout
ttm:
- refactor pool allocation
- add helpers for TTM shrinker
panel-orientation:
- add a bunch of new quirks
panel:
- convert panels to multi-style functions
- edp: Add support for B140UAN04.4, BOE NV140FHM-NZ, CSW MNB601LS1-3,
LG LP079QX1-SP0V, MNE007QS3-7, STA 116QHD024002, Starry
116KHD024006, Lenovo T14s Gen6 Snapdragon
- himax-hx83102: Add support for CSOT PNA957QT1-1, Kingdisplay
kd110n11-51ie, Starry 2082109qfh040022-50e
- visionox-r66451: use multi-style MIPI-DSI functions
- raydium-rm67200: Add driver for Raydium RM67200
- simple: Add support for BOE AV123Z7M-N17, BOE AV123Z7M-N17
- sony-td4353-jdi: Use MIPI-DSI multi-func interface
- summit: Add driver for Apple Summit display panel
- visionox-rm692e5: Add driver for Visionox RM692E5
bridge:
- pass full atomic state to various callbacks
- adv7511: Report correct capabilities
- it6505: Fix HDCP V compare
- snd65dsi86: fix device IDs
- nwl-dsi: set bridge type
- ti-sn65si83: add error recovery and set bridge type
- synopsys: add HDMI audio support
xe:
- support device-wedged event
- add mmap support for PCI memory barrier
- perf pmu integration and expose per-engien activity
- add EU stall sampling support
- GPU SVM and Xe SVM implementation
- use TTM shrinker
- add survivability mode to allow the driver to do firmware updates
in critical failure states
- PXP HWDRM support for MTL and LNL
- expose package/vram temps over hwmon
- enable DP tunneling
- drop mmio_ext abstraction
- Reject BO evcition if BO is bound to current VM
- Xe suballocator improvements
- re-use display vmas when possible
- add GuC Buffer Cache abstraction
- PCI ID update for Panther Lake and Battlemage
- Enable SRIOV for Panther Lake
- Refactor VRAM manager location
i915:
- enable extends wake timeout
- support device-wedged event
- Enable DP 128b/132b SST DSC
- FBC dirty rectangle support for display version 30+
- convert i915/xe to drm client setup
- Compute HDMI PLLS for rates not in fixed tables
- Allow DSB usage when PSR is enabled on LNL+
- Enable panel replay without full modeset
- Enable async flips with compressed buffers on ICL+
- support luminance based brightness via DPCD for eDP
- enable VRR enable/disable without full modeset
- allow GuC SLPC default strategies on MTL+ for performance
- lots of display refactoring in move to struct intel_display
amdgpu:
- add device wedged event
- support async page flips on overlay planes
- enable broadcast RGB drm property
- add info ioctl for virt mode
- OEM i2c support for RGB lights
- GC 11.5.2 + 11.5.3 support
- SDMA 6.1.3 support
- NBIO 7.9.1 + 7.11.2 support
- MMHUB 1.8.1 + 3.3.2 support
- DCN 3.6.0 support
- Add dynamic workload profile switching for GC 10-12
- support larger VBIOS sizes
- Mark gttsize parameters as deprecated
- Initial JPEG queue resset support
amdkfd:
- add KFD per process flags for setting precision
- sync pasid values between KGD and KFD
- improve GTT/VRAM handling for APUs
- fix user queue validation on GC7/8
- SDMA queue reset support
raedeon:
- rs400 hyperz fix
i2c:
- td998x: drop platform_data, split driver into media and bridge
ast:
- transmitter chip detection refactoring
- vbios display mode refactoring
- astdp: fix connection status and filter unsupported modes
- cursor handling refactoring
imagination:
- check job dependencies with sched helper
ivpu:
- improve command queue handling
- use workqueue for IRQ handling
- add support HW fault injection
- locking fixes
mgag200:
- add support for G200eH5
msm:
- dpu: add concurrent writeback support for DPU 10.x+
- use LTTPR helpers
- GPU:
- Fix obscure GMU suspend failure
- Expose syncobj timeline support
- Extend GPU devcoredump with pagetable info
- a623 support
- Fix a6xx gen1/gen2 indexed-register blocks in gpu snapshot /
devcoredump
- Display:
- Add cpu-cfg interconnect paths on SM8560 and SM8650
- Introduce KMS OMMU fault handler, causing devcoredump snapshot
- Fixed error pointer dereference in msm_kms_init_aspace()
- DPU:
- Fix mode_changing handling
- Add writeback support on SM6150 (QCS615)
- Fix DSC programming in 1:1:1 topology
- Reworked hardware resource allocation, moving it to the CRTC code
- Enabled support for Concurrent WriteBack (CWB) on SM8650
- Enabled CDM blocks on all relevant platforms
- Reworked debugfs interface for BW/clocks debugging
- Clear perf params before calculating bw
- Support YUV formats on writeback
- Fixed double inclusion
- Fixed writeback in YUV formats when using cloned output, Dropped
wb2_formats_rgb
- Corrected dpu_crtc_check_mode_changed and struct dpu_encoder_virt
kerneldocs
- Fixed uninitialized variable in dpu_crtc_kickoff_clone_mode()
- DSI:
- DSC-related fixes
- Rework clock programming
- DSI PHY:
- Fix 7nm (and lower) PHY programming
- Add proper DT schema definitions for DSI PHY clocks
- HDMI:
- Rework the driver, enabling the use of the HDMI Connector
framework
- Bindings:
- Added eDP PHY on SA8775P
nouveau:
- move drm_slave_encoder interface into driver
- nvkm: refactor GSP RPC
- use LTTPR helpers
mediatek:
- HDMI fixup and refinement
- add MT8188 dsc compatible
- MT8365 SoC support
panthor:
- Expose sizes of intenral BOs via fdinfo
- Fix race between reset and suspend
- Improve locking
qaic:
- Add support for AIC200
renesas:
- Fix limits in DT bindings
rockchip:
- support rk3562-mali
- rk3576: Add HDMI support
- vop2: Add new display modes on RK3588 HDMI0 up to 4K
- Don't change HDMI reference clock rate
- Fix DT bindings
- analogix_dp: add eDP support
- fix shutodnw
solomon:
- Set SPI device table to silence warnings
- Fix pixel and scanline encoding
v3d:
- handle clock
vc4:
- Use drm_exec
- Use dma-resv for wait-BO ioctl
- Remove seqno infrastructure
virtgpu:
- Support partial mappings of GEM objects
- Reserve VGA resources during initialization
- Fix UAF in virtgpu_dma_buf_free_obj()
- Add panic support
vkms:
- Switch to a managed modesetting pipeline
- Add support for ARGB8888
- fix UAf
xlnx:
- Set correct DMA segment size
- use mutex guards
- Fix error handling
- Fix docs"
* tag 'drm-next-2025-03-28' of https://gitlab.freedesktop.org/drm/kernel: (1762 commits)
drm/amd/pm: Update feature list for smu_v13_0_6
drm/amdgpu: Add parameter documentation for amdgpu_sync_fence
drm/amdgpu/discovery: optionally use fw based ip discovery
drm/amdgpu/discovery: use specific ip_discovery.bin for legacy asics
drm/amdgpu/discovery: check ip_discovery fw file available
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amd/pm: Remove unnecessay UQ10 to UINT conversion
drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA
drm/amdgpu: Optimize VM invalidation engine allocation and synchronize GPU TLB flush
drm/amd/amdgpu: Increase max rings to enable SDMA page ring
drm/amdgpu: Decode deferred error type in gfx aca bank parser
drm/amdgpu/gfx11: Add Cleaner Shader Support for GFX11.5 GPUs
drm/amdgpu/mes: clean up SDMA HQD loop
drm/amdgpu/mes: enable compute pipes across all MEC
drm/amdgpu/mes: drop MES 10.x leftovers
drm/amdgpu/mes: optimize compute loop handling
drm/amdgpu/sdma: guilty tracking is per instance
drm/amdgpu/sdma: fix engine reset handling
drm/amdgpu: remove invalid usage of sched.ready
drm/amdgpu: add cleaner shader trace point
...
GC12 only has 1 mec.
Fixes: 52cb80c12e ("drm/amdgpu: Add gfx v12_0 ip block support (v6)")
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GC11 only has 1 mec.
Fixes: 3d879e81f0 ("drm/amdgpu: add init support for GFX11 (v2)")
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch VBIOS from shadow ROM when available before trying other methods
like EFI method.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: 9c081c11c6 ("drm/amdgpu: Reorder to read EFI exported ROM first")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4066
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
GC v9_4_2 uses a new versioning scheme for CP firmware, making
the warning ("CP firmware version too old, please update!") irrelevant.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This looks unnecessary and actually extremely harmful since using kmap()
is not possible while inside the ring reset.
Remove all the extra mapping and unmapping of the MQDs.
v2: also fix debugfs
v3: fix coding style typo
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
this temporarily reverts
commit 6ec04e38b2 ("drm/amdgpu/sdma_v4_4_2: update VM flush implementation for SDMA")
it cause a regression.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We should only increase the deferred errors in UMC block.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update ta ra block to keep sync with RAS TA.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Compute partition DPX is possible in NPS2 mode. Update the compatible
modes for DPX.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case of parsing GFX deferred error from SMU corrected error
channel, the error count should be set to 1 instead of parsing from
MISC0 register, which is 0.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If compiled without SI or CIK support but amdgpu tries to load it
will run into failures with uninitialized callbacks.
Show a nicer message in this case and fail probe instead.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4050
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the upcoming
Rust integration and is obviously a silly implementation to begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member.
-----BEGIN PGP SIGNATURE-----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=bYAX
-----END PGP SIGNATURE-----
Merge tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanups from Thomas Gleixner:
"A treewide hrtimer timer cleanup
hrtimers are initialized with hrtimer_init() and a subsequent store to
the callback pointer. This turned out to be suboptimal for the
upcoming Rust integration and is obviously a silly implementation to
begin with.
This cleanup replaces the hrtimer_init(T); T->function = cb; sequence
with hrtimer_setup(T, cb);
The conversion was done with Coccinelle and a few manual fixups.
Once the conversion has completely landed in mainline, hrtimer_init()
will be removed and the hrtimer::function becomes a private member"
* tag 'timers-cleanups-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (100 commits)
wifi: rt2x00: Switch to use hrtimer_update_function()
io_uring: Use helper function hrtimer_update_function()
serial: xilinx_uartps: Use helper function hrtimer_update_function()
ASoC: fsl: imx-pcm-fiq: Switch to use hrtimer_setup()
RDMA: Switch to use hrtimer_setup()
virtio: mem: Switch to use hrtimer_setup()
drm/vmwgfx: Switch to use hrtimer_setup()
drm/xe/oa: Switch to use hrtimer_setup()
drm/vkms: Switch to use hrtimer_setup()
drm/msm: Switch to use hrtimer_setup()
drm/i915/request: Switch to use hrtimer_setup()
drm/i915/uncore: Switch to use hrtimer_setup()
drm/i915/pmu: Switch to use hrtimer_setup()
drm/i915/perf: Switch to use hrtimer_setup()
drm/i915/gvt: Switch to use hrtimer_setup()
drm/i915/huc: Switch to use hrtimer_setup()
drm/amdgpu: Switch to use hrtimer_setup()
stm class: heartbeat: Switch to use hrtimer_setup()
i2c: Switch to use hrtimer_setup()
iio: Switch to use hrtimer_setup()
...
The 'flags' parameter, which specifies memory allocation behavior while
creating a sync entry,
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/amdgpu_sync.c:162: warning: Function parameter or struct member 'flags' not described in 'amdgpu_sync_fence'
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On chips without native IP discovery support, use the fw binary
if available, otherwise we can continue without it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
vega10/vega12/vega20/raven/raven2/picasso/arcturus/aldebaran
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit updates the VM flush implementation for the SDMA engine.
- Added a new function `sdma_v4_4_2_get_invalidate_req` to construct the VM_INVALIDATE_ENG0_REQ
register value for the specified VMID and flush type. This function ensures that all relevant
page table cache levels (L1 PTEs, L2 PTEs, and L2 PDEs) are invalidated.
- Modified the `sdma_v4_4_2_ring_emit_vm_flush` function to use the new `sdma_v4_4_2_get_invalidate_req`
function. The updated function emits the necessary register writes and waits to perform a VM flush
for the specified VMID. It updates the PTB address registers and issues a VM invalidation request
using the specified VM invalidation engine.
- Included the necessary header file `gc/gc_9_0_sh_mask.h` to provide access to the required register
definitions.
v2: vm flush by the vm inalidation packet (Lijo)
v3: code stle and define thh macro for the vm invalidation packet (Christian)
v4: Format definition sdma vm invalidate packet (Lijo)
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Modify the VM invalidation engine allocation logic to handle SDMA page rings.
SDMA page rings now share the VM invalidation engine with SDMA gfx rings instead of
allocating a separate engine. This change ensures efficient resource management and
avoids the issue of insufficient VM invalidation engines.
- Add synchronization for GPU TLB flush operations in gmc_v9_0.c.
Use spin_lock and spin_unlock to ensure thread safety and prevent race conditions
during TLB flush operations. This improves the stability and reliability of the driver,
especially in multi-threaded environments.
v2: replace the sdma ring check with a function `amdgpu_sdma_is_page_queue`
to check if a ring is an SDMA page queue.(Lijo)
v3: Add GC version check, only enabled on GC9.4.3/9.4.4/9.5.0
v4: Fix code style and add more detailed description (Christian)
v5: Remove dependency on vm_inv_eng loop order, explicitly lookup shared inv_eng(Christian/Lijo)
v6: Added search shared ring function amdgpu_sdma_get_shared_ring (Lijo)
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Increase the maximum number of rings supported by the AMDGPU driver from 133 to 149.
This change is necessary to enable support for the SDMA page ring.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the case of injecting uncorrected error with background workload,
the deferred error among uncorrected errors need to be specified
by checking the deferred and poison bits of status register.
v2: refine checking for deferred error
v2: log possiable DEs among CEs
v2: generate CPER records for DEs among UEs
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable the cleaner shader for GFX11.5.0/11.5.1 GPUs to provide data
isolation between GPU workloads. The cleaner shader is responsible for
clearing the Local Data Store (LDS), Vector General Purpose Registers
(VGPRs), and Scalar General Purpose Registers (SGPRs), which helps
prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX11.5.0/11.5.1 GPUs,
previously available for GFX11.0.3. It enhances security by clearing GPU
memory between processes and maintains a consistent GPU state across KGD
and KFD workloads.
Cc: Mario Sopena-Novales <mario.novales@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Follow the same logic as the other IP types.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Leftover from MES bring up. There is no production
MES support for MES 10.x. The rest of the MES 10.x
code has already been removed so drop this.
Acked-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Break when we get to the end of the supported pipes
rather than continuing the loop.
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gfx and page queues are per instance, so track them
per instance.
v2: drop extra parameter (Lijo)
Fixes: fdbfaaaae0 ("drm/amdgpu: Improve SDMA reset logic with guilty queue tracking")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the kfd suspend/resume code into the caller. That
is where the KFD is likely to detect a reset so on the KFD
side there is no need to call them. Also add a mutex to
lock the actual reset sequence.
v2: make the locking per instance
Fixes: bac38ca8c4 ("drm/amdkfd: implement per queue sdma reset for gfx 9.4+")
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I can't count how often I had to remove this nonsense.
Probably doesn't need an explanation any more.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Note when the cleaner shader is executed.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Note when we switch from one isolation owner to another.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
That was quite troublesome for gang submit. Completely drop this
approach and enforce the isolation separately.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of emitting the cleaner shader for every job which has the
enforce_isolation flag set only emit it for the first submission from
every client.
v2: add missing NULL check
v3: fix another NULL pointer deref
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limiting the number of available VMIDs to enforce isolation causes some
issues with gang submit and applying certain HW workarounds which
require multiple VMIDs to work correctly.
So instead start to track all submissions to the relevant engines in a
per partition data structure and use the dma_fences of the submissions
to enforce isolation similar to what a VMID limit does.
v2: use ~0l for jobs without isolation to distinct it from kernel
submissions which uses NULL for the owner. Add some warning when we
are OOM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows using amdgpu_sync even without peeking into the fences for a
long time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the critical submission path memory allocations can't wait for
reclaim since that can potentially wait for submissions to finish.
Finally clean that up and mark most memory allocations in the critical
path with GFP_NOWAIT. The only exception left is the dma_fence_array()
used when no VMID is available, but that will be cleaned up later on.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 55ff973fe1.
Reason for revert: this causes some tests fail with call trace.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SRIOV, skip the SDMA queue reset and return
error. The engine/queue reset failure will trigger
FLR in the sequence.
v2: do not add queue reset support mask for sriov
Signed-off-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add case for 13.0.12.
Signed-off-by: Ahmad Rehman <ahrehman@amd.com>
Reviewed-by: Vignesh.Chander@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This enables ras to be resumed after gpu recovery on mi350 sriov.
Signed-off-by: Ellen Pan <yunru.pan@amd.com>
Reviewed-by: Ahmad Rehman <Ahmad.Rehman@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VFs cannot read the NAK_COUNTER register. This information is only
available through PMFW metrics.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add description for debug_mask bit options.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain cases, it's desirable to avoid PMFW log transactions to
system memory. Add a mask bit to decide whether to allocate smu pool in
device memory or system memory.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No need to make the workload profile setup dependent
on the results of cancelling the delayed work thread.
We have all of the necessary checking in place for the
workload profile reference counting, so separate the
two. As it is now, we can theoretically end up with
the call from begin_use happening while the worker
thread is executing which would result in the profile
not getting set for that submission. It should not
affect the reference counting.
v2: bail early if the the profile is already active (Lijo)
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
