____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
____cacheline_aligned_in_smp attribute only makes sure to align
a field to a cache line. It does not prevent the linker to use
the remaining of the cache line for other variables, causing
potential false sharing.
Move tcp_memory_allocated into a dedicated cache line.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using per-cpu data for net->net_cookie generation is overkill,
because even busy hosts do not create hundreds of netns per second.
Make sure to put net_cookie in a private cache line to avoid
potential false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This structure will hold networking data that must
consume a full cache line to avoid accidental false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250630093540.3052835-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to USB4 specification, if E2E flow control is disabled for
the Transmit Descriptor Ring, the Host Interface Adapter Layer shall
not require any credits to be available before transmitting a Tunneled
Packet from this Transmit Descriptor Ring, so e2e flow control should
be enabled in both directions.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250624153805.GC2824380@black.fi.intel.com
Signed-off-by: zhangjianrong <zhangjianrong5@huawei.com>
Link: https://patch.msgid.link/20250628093813.647005-1-zhangjianrong5@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the description of tb_xdomain_enable_paths(), the third
parameter represents the transmit ring and the fifth parameter represents
the receive ring. tb_xdomain_disable_paths() is the same case.
[Jakub] Mika says: it works now because both rings ->hop is the same
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250625051149.GD2824380@black.fi.intel.com
Signed-off-by: zhangjianrong <zhangjianrong5@huawei.com>
Link: https://patch.msgid.link/20250628094920.656658-1-zhangjianrong5@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Failing during the initialization of root_namespace didn't cleanup
the priorities of the namespace on which the failure occurred.
Properly cleanup said priorities on failure.
Fixes: 52931f5515 ("net/mlx5: fs, add multiple prios to RDMA TRANSPORT steering domain")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://patch.msgid.link/78cf89b5d8452caf1e979350b30ada6904362f66.1751451780.git.leon@kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
- Fix PCI error recovery and bring it in line with AER/EEH
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQQrtrZiYVkVzKQcYivNdxKlNrRb8AUCaGU3EBccYWdvcmRlZXZA
bGludXguaWJtLmNvbQAKCRDNdxKlNrRb8BoVAP4+t6zSnkV8nSDTX6yISaI9o8Dx
v4feTwMOkizuFbQbxQEA/QiQsN4bOymNDWwNgkzLDEBjirVLsYVzlvS2ttFfjAE=
=oStU
-----END PGP SIGNATURE-----
Merge tag 's390-6.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Alexander Gordeev:
- Fix PCI error recovery and bring it in line with AER/EEH
* tag 's390-6.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/pci: Allow automatic recovery with minimal driver support
s390/pci: Do not try re-enabling load/store if device is disabled
s390/pci: Fix stale function handles in error handling
Some changes to the userspace selftest framework cause the iommufd tests
to start failing. This turned out to be bugs in the iommufd side that were
just getting uncovered.
- Deal with MAP_HUGETLB mmaping more than requested even when in MAP_FIXED
mode
- Fixup missing error flow cleanup in the test
- Check that the memory allocations suceeded
- Suppress some bogus gcc 'may be used uninitialized' warnings
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaGU5zgAKCRCFwuHvBreF
YWsUAP9tLIwPDojp5bovlHRn6D9EbeJo96DSaG7ZRKLeBMJzSAEAtob6On8QNTUY
paSxWftGWC0Xyy5BXrAg/HTEM394PAg=
=UXkc
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fixes from Jason Gunthorpe:
"Some changes to the userspace selftest framework cause the iommufd
tests to start failing. This turned out to be bugs in the iommufd side
that were just getting uncovered.
- Deal with MAP_HUGETLB mmaping more than requested even when in
MAP_FIXED mode
- Fixup missing error flow cleanup in the test
- Check that the memory allocations suceeded
- Suppress some bogus gcc 'may be used uninitialized' warnings"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Fix build warnings due to uninitialized mfd
iommufd/selftest: Add asserts testing global mfd
iommufd/selftest: Add missing close(mfd) in memfd_mmap()
iommufd/selftest: Fix iommufd_dirty_tracking with large hugepage sizes
Several mlx5 bugs, crashers, and reports
- Limit stack usage
- Fix mis-use of __xa_store/erase() without holding the lock to a locked
version
- Rate limit prints in the gid cache error cases
- Fully initialize the event object before making it globally visible in
an xarray
- Fix deadlock inside the ODP code if the MMU notifier was called from a
reclaim context
- Include missed counters for some switchdev configurations and mulit-port MPV
mode
- Fix loopback packet support when in mulit-port MPV mode
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaGVC1AAKCRCFwuHvBreF
YeaCAP4opgkgFIqpAcpYVZbNjeh4XGbH04mLlP+sKU07U+U+6AD/WubEZZdttP4m
vODiddGUIdw3ZvrFDoqWlZ7A/8/SdgI=
=vc41
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"Several mlx5 bugs, crashers, and reports:
- Limit stack usage
- Fix mis-use of __xa_store/erase() without holding the lock to a
locked version
- Rate limit prints in the gid cache error cases
- Fully initialize the event object before making it globally visible
in an xarray
- Fix deadlock inside the ODP code if the MMU notifier was called
from a reclaim context
- Include missed counters for some switchdev configurations and
mulit-port MPV mode
- Fix loopback packet support when in mulit-port MPV mode"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/mlx5: Fix vport loopback for MPV device
RDMA/mlx5: Fix CC counters query for MPV
RDMA/mlx5: Fix HW counters query for non-representor devices
IB/core: Annotate umem_mutex acquisition under fs_reclaim for lockdep
IB/mlx5: Fix potential deadlock in MR deregistration
RDMA/mlx5: Initialize obj_event->obj_sub_list before xa_insert
RDMA/core: Rate limit GID cache warning messages
RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling
RDMA/mlx5: reduce stack usage in mlx5_ib_ufile_hw_cleanup
dma_map_XXX() functions return values DMA_MAPPING_ERROR as error values
which is often ~0. The error value should be tested with
dma_mapping_error().
This patch creates a new function in niu_ops to test if the mapping
failed. The test is fixed in niu_rbr_add_page(), added in
niu_start_xmit() and the successfully mapped pages are unmaped upon error.
Fixes: ec2deec1f3 ("niu: Fix to check for dma mapping errors.")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is not only a cosmetic change because the section mismatch checks
also depend on the name and for drivers the checks are stricter than for
ops.
However xircom_driver also passes the stricter checks just fine, so no
further changes needed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20250627102220.1937649-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is not only a cosmetic change because the section mismatch checks
(implemented in scripts/mod/modpost.c) also depend on the object's name
and for drivers the checks are stricter than for ops.
However aq_pci_driver also passes the stricter checks just fine, so no
further changes needed.
The cheating^Wmisleading name was introduced in commit 97bde5c4f9
("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250630164406.57589-2-u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the user reinitializes the network interface, the PHY will reinitialize,
and the CKO settings will revert to their initial configuration(be enabled).
To prevent CKO from being re-enabled,
en8811h_clk_restore_context and en8811h_resume were added
to ensure the CKO settings remain correct.
Signed-off-by: Lucien.Jheng <lucienzx159@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250630154147.80388-1-lucienzx159@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct devlink_region_ops' and 'struct hellcreek_fdb_entry' are not
modified in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
55320 19216 320 74856 12468 drivers/net/dsa/hirschmann/hellcreek.o
After:
=====
text data bss dec hex filename
55960 18576 320 74856 12468 drivers/net/dsa/hirschmann/hellcreek.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://patch.msgid.link/2f7e8dc30db18bade94999ac7ce79f333342e979.1751231174.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Andrea Mayer says:
====================
seg6: fix typos in comments within the SRv6 subsystem
In this patchset, we correct some typos found both in the SRv6 Endpoints
implementation (i.e., seg6local) and in some SRv6 selftests, using
codespell.
====================
Link: https://patch.msgid.link/20250629171226.4988-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a typo:
instaces -> instances
The typo has been identified using codespell, and the tool does not
report any additional issues in the selftests considered.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629171226.4988-3-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a typo:
lenghts -> length
The typo has been identified using codespell, and the tool currently
does not report any additional issues in comments.
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629171226.4988-2-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use kcalloc() instead of hand writing it. This is less verbose.
Also move the initialization of 'count' to save some LoC.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
18652 5920 64 24636 603c drivers/net/dsa/mv88e6xxx/devlink.o
After:
=====
text data bss dec hex filename
18498 5920 64 24482 5fa2 drivers/net/dsa/mv88e6xxx/devlink.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/2f4fca4ff84950da71e007c9169f18a0272476f3.1751200453.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct devlink_region_ops' and 'struct mv88e6xxx_region' are not modified
in this driver.
Constifying these structures moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
18076 6496 64 24636 603c drivers/net/dsa/mv88e6xxx/devlink.o
After:
=====
text data bss dec hex filename
18652 5920 64 24636 603c drivers/net/dsa/mv88e6xxx/devlink.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/46040062161dda211580002f950a6d60433243dc.1751200453.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aquantia AQC113(C) using ATL2FW doesn't properly prepare the NIC for
enabling wake-on-lan. The FW operation `set_power` was only implemented
for `hw_atl` and not `hw_atl2`. Implement the `set_power` functionality
for `hw_atl2`.
Tested with both AQC113 and AQC113C devices. Confirmed you can shutdown
the system and wake from S5 using magic packets. NIC was previously
powered off when entering S5. If the NIC was configured for WOL by the
Windows driver, loading the atlantic driver would disable WOL.
Partially cherry-picks changes from commit,
https://github.com/Aquantia/AQtion/commit/37bd5cc
Attributing original authors from Marvell for the referenced commit.
Closes: https://github.com/Aquantia/AQtion/issues/70
Co-developed-by: Igor Russkikh <irusskikh@marvell.com>
Co-developed-by: Mark Starovoitov <mstarovoitov@marvell.com>
Co-developed-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Co-developed-by: Pavel Belous <pbelous@marvell.com>
Co-developed-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Eric Work <work.eric@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://patch.msgid.link/20250629051535.5172-1-work.eric@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are two bugs in rose_rt_device_down() that can cause
use-after-free:
1. The loop bound `t->count` is modified within the loop, which can
cause the loop to terminate early and miss some entries.
2. When removing an entry from the neighbour array, the subsequent entries
are moved up to fill the gap, but the loop index `i` is still
incremented, causing the next entry to be skipped.
For example, if a node has three neighbours (A, A, B) with count=3 and A
is being removed, the second A is not checked.
i=0: (A, A, B) -> (A, B) with count=2
^ checked
i=1: (A, B) -> (A, B) with count=2
^ checked (B, not A!)
i=2: (doesn't occur because i < count is false)
This leaves the second A in the array with count=2, but the rose_neigh
structure has been freed. Code that accesses these entries assumes that
the first `count` entries are valid pointers, causing a use-after-free
when it accesses the dangling pointer.
Fix both issues by iterating over the array in reverse order with a fixed
loop bound. This ensures that all entries are examined and that the removal
of an entry doesn't affect subsequent iterations.
Reported-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=e04e2c007ba2c80476cb
Tested-by: syzbot+e04e2c007ba2c80476cb@syzkaller.appspotmail.com
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250629030833.6680-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon receiving the Reset Request, pause the connection and clean up
queues, wait for the specified period, then resume the NIC.
In the cleanup phase, the HWC is no longer responding, so set hwc_timeout
to zero to skip waiting on the response.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1751055983-29760-1-git-send-email-haiyangz@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the Signal Quality Indicator (SQI) feature on KSZ9477
family switches, providing a relative measure of receive signal quality.
The hardware exposes separate SQI readings per channel. For 1000BASE-T,
all four channels are read. For 100BASE-TX, only one channel is reported,
but which receive pair is active depends on Auto MDI-X negotiation, which
is not exposed by the hardware. Therefore, it is not possible to reliably
map the measured channel to a specific wire pair.
This resolves an earlier discussion about how to handle multi-channel
SQI. Originally, the plan was to expose all channels individually.
However, since pair mapping is sometimes unavailable, this
implementation treats SQI as a per-link metric instead. This fallback
avoids ambiguity and ensures consistent behavior. The existing get_sqi()
UAPI was designed for single-pair Ethernet (SPE), where per-pair and
per-link are effectively equivalent. Restricting its use to per-link
metrics does not introduce regressions for existing users.
The raw 7-bit SQI value (0–127, lower is better) is converted to the
standard 0–7 (high is better) scale. Empirical testing showed that the
link becomes unstable around a raw value of 8.
The SQI raw value remains zero if no data is received, even if noise is
present. This confirms that the measurement reflects the "quality" during
active data reception rather than the passive line state. User space
must ensure that traffic is present on the link to obtain valid SQI
readings.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20250627112539.895255-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comparison in enic_change_mtu() incorrectly used the current
netdev->mtu instead of the new new_mtu value when warning about
an MTU exceeding the port MTU. This could suppress valid warnings
or issue incorrect ones.
Fix the condition and log to properly reflect the new_mtu.
Fixes: ab123fe071 ("enic: handle mtu change for vf properly")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Acked-by: John Daley <johndale@cisco.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250628145612.476096-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor cleanup: remove the pointless looking _ wrapper around
page_pool_put_page, and just do the call directly.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20250627200501.1712389-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
linux/version.h was used by the out-of-tree version, but not needed in
the upstream one anymore.
While I'm at it, sort the includes.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202506271434.Gk0epC9H-lkp@intel.com/
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20250627200501.1712389-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is possible via the ioctl API:
> ip -6 tunnel change ip6tnl0 mode any
Let's align the netlink API:
> ip link set ip6tnl0 type ip6tnl mode any
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20250630145602.1027220-1-nicolas.dichtel@6wind.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The config snippet specifies CONFIG_NET_EMATCH_IPSET. This option
depends on CONFIG_IP_SET.
Set CONFIG_IP_SET to be enabled at part for tc-testing.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20250630153341.Wgh3SzGi@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update the Clause 37 Auto-Negotiation implementation to properly align
with the PCS hardware specifications:
- Fix incorrect bit settings in Link Status and Link Duplex fields
- Implement missing sequence steps 2 and 7
These changes ensure CL37 auto-negotiation protocol follows the exact
sequence patterns as specified in the hardware databook.
Fixes: 1bf40ada62 ("amd-xgbe: Add support for clause 37 auto-negotiation")
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20250630192636.3838291-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Smatch complains that the error message isn't set in the caller:
lib/test_objagg.c:923 test_hints_case2()
error: uninitialized symbol 'errmsg'.
This static checker warning only showed up after a recent refactoring
but the bug dates back to when the code was originally added. This
likely doesn't affect anything in real life.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202506281403.DsuyHFTZ-lkp@intel.com/
Fixes: 0a020d416d ("lib: introduce initial implementation of object aggregation manager")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8548f423-2e3b-4bb7-b816-5041de2762aa@sabinyo.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido spotted that I made a mistake in commit under Fixes,
ethnl_default_parse() may acquire a dev reference even when it returns
an error. This may have been driven by the code structure in dumps
(which unconditionally release dev before handling errors), but it's
too much of a trap. Functions should undo what they did before returning
an error, rather than expecting caller to clean up.
Rather than fixing ethnl_default_set_doit() directly make
ethnl_default_parse() clean up errors.
Reported-by: Ido Schimmel <idosch@idosch.org>
Link: https://lore.kernel.org/aGEPszpq9eojNF4Y@shredder
Fixes: 963781bdfe ("net: ethtool: call .parse_request for SET handlers")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250630154053.1074664-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d48523cb88 ("sfc: Copy shared files needed for Siena (part 2)")
use xdp_rxq_info_valid to track failures of xdp_rxq_info_reg().
However, this driver-maintained state becomes redundant since the XDP
framework already provides xdp_rxq_info_is_reg() for checking registration
status.
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250628051033.51133-1-wangfushuai@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit eb9a36be7f ("sfc: perform XDP processing on received packets")
use xdp_rxq_info_valid to track failures of xdp_rxq_info_reg().
However, this driver-maintained state becomes redundant since the XDP
framework already provides xdp_rxq_info_is_reg() for checking registration
status.
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Link: https://patch.msgid.link/20250628051016.51022-1-wangfushuai@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Fix loop in GSS sequence number cache
* Clean up /proc/net/rpc/nfs if nfs_fs_proc_net_init() fails
* Fix a race to wake on NFS_LAYOUT_DRAIN
* Fix handling of NFS level errors in I/O
-----BEGIN PGP SIGNATURE-----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=F4+b
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-6.16-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client fixes from Anna Schumaker:
- Fix loop in GSS sequence number cache
- Clean up /proc/net/rpc/nfs if nfs_fs_proc_net_init() fails
- Fix a race to wake on NFS_LAYOUT_DRAIN
- Fix handling of NFS level errors in I/O
* tag 'nfs-for-6.16-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4/flexfiles: Fix handling of NFS level errors in I/O
NFSv4/pNFS: Fix a race to wake on NFS_LAYOUT_DRAIN
nfs: Clean up /proc/net/rpc/nfs when nfs_fs_proc_net_init() fails.
sunrpc: fix loop in gss seqno cache
I226 devices advertise support for the PCI-E link L1.2 substate. However,
due to a hardware limitation, the exit latency from this low-power state
is longer than the packet buffer can tolerate under high traffic
conditions. This can lead to packet loss and degraded performance.
To mitigate this, disable the L1.2 substate. The increased power draw
between L1.1 and L1.2 is insignificant.
Fixes: 4354621173 ("igc: Add new device ID's")
Link: https://lore.kernel.org/intel-wired-lan/15248b4f-3271-42dd-8e35-02bfc92b25e1@intel.com
Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
_Static_assert(ARRAY_SIZE(map) != IEEE8021Q_TT_MAX - 1) rejects only a
length of 7 and allows any other mismatch. Replace it with a strict
equality test via a helper macro so that every mapping table must have
exactly IEEE8021Q_TT_MAX (8) entries.
Signed-off-by: RubenKelevra <rubenkelevra@gmail.com>
Link: https://patch.msgid.link/20250626205907.1566384-1-rubenkelevra@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
fbnic takes 4 parameters to configure the Rx queues. The semantics
are similar to other existing NICs but confusing to newcomers.
Document it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250626191554.32343-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If no PHY device is found (e.g., for LAN7801 in fixed-link mode),
lan78xx_phy_init() may proceed to dereference a NULL phydev pointer,
leading to a crash.
Update the logic to perform MAC configuration first, then check for the presence
of a PHY. For the fixed-link case, set up the fixed link and return early,
bypassing any code that assumes a valid phydev pointer.
It is safe to move lan78xx_mac_prepare_for_phy() earlier because this function
only uses information from dev->interface, which is configured by
lan78xx_get_phy() beforehand. The function does not access phydev or any data
set up by later steps.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: e110bc8258 ("net: usb: lan78xx: Convert to PHYLINK for improved PHY and MAC management")
Link: https://patch.msgid.link/20250626103731.3986545-1-o.rempel@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tamir Duberstein says:
====================
Clean up usage of ffi types
Remove qualification of ffi types which are included in the prelude and
change `as` casts to target the proper ffi type alias rather than the
underlying primitive.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
====================
Link: https://patch.msgid.link/20250625-correct-type-cast-v2-0-6f2c29729e69@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- MGMT: set_mesh: update LE scan interval and window
- MGMT: mesh_send: check instances prior disabling advertising
- hci_sync: revert some mesh modifications
- hci_sync: Set extended advertising data synchronously
- hci_sync: Prevent unintended pause by checking if advertising is active
-----BEGIN PGP SIGNATURE-----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=QBPI
-----END PGP SIGNATURE-----
Merge tag 'for-net-2025-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: set_mesh: update LE scan interval and window
- MGMT: mesh_send: check instances prior disabling advertising
- hci_sync: revert some mesh modifications
- hci_sync: Set extended advertising data synchronously
- hci_sync: Prevent unintended pause by checking if advertising is active
* tag 'for-net-2025-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: HCI: Set extended advertising data synchronously
Bluetooth: MGMT: mesh_send: check instances prior disabling advertising
Bluetooth: MGMT: set_mesh: update LE scan interval and window
Bluetooth: hci_sync: revert some mesh modifications
Bluetooth: Prevent unintended pause by checking if advertising is active
====================
Link: https://patch.msgid.link/20250627181601.520435-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
