Currently ALPM parameters are computed directly into
intel_dp->alpm_parameters. This is a problem when compute config ends up to
not using the computed state.
Fix this by adding ALPM parameters into intel_crtc_state and compute into
there. Copy needed parameters (io_wake_lines and fast_wake_lines used by
PSR activate/exit) from crtc_state->alpm_state into
intel_dp->alpm.alpm_parameters when they are configured into HW.
v3:
- enhance commit message
v2:
- store io/fast wake lines into intel_dp->dp instead of
intel_dp->alpm_parameters and do it in intel_psr_enable_locked
- rename crtc_state->alpm_parameters -> crtc_state->alpm_state
- clarify commit message
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250929130003.28365-1-jouni.hogander@intel.com
We are currently observing crc failures after we started using dsb for PSR
updates as well. This seems to happen because PSR HW is still sending
couple of updates using old framebuffers on wake-up.
This patch is preparing to fix that by adding interface which can be used
to add poll ensuring PSR HW is idle into dsb commit.
v3: add intel_dsb as a parameter to intel_psr_wait_for_idle_dsb
v2: add pass crtc_state->dsb_commit as parameter
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250905072708.2659411-4-jouni.hogander@intel.com
PSR work is using __psr_wait_for_idle_locked to ensure PSR exit is
completed before continuing to PSR activation. __psr_wait_for_idle_locked
is unlocking PSR mutex which allows PSR disable/enable and PSR
pause/resume while PSR idle is being wait. PSR enable status is already
checked after locking again PSR mutex but PSR pause counter check is
missing. Due to this PSR work may continue to PSR activation even PSR is
paused.
Fix this by checking PSR pause counter in __psr_wait_for_idle_locked after
PSR mutex is locked again.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Jeevan B <jeevan.b@intel.com>
Link: https://lore.kernel.org/r/20250826074457.1992524-1-jouni.hogander@intel.com
Underrun on idle PSR workaround (Wa_16025596647) is supposed to be
applied only when pkg c latency > delayed vblank. Currently we are
applying it always when other criterias are met.
Fix this by adding new boolean flag which is supposed to be set when
calculating watermark levels and pkgc latency > delayed vblank is
detected. currently this scenario is blocked but might be added
later. Due to this add also TODO comment into
skl_max_wm_level_for_vblank.
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://lore.kernel.org/r/20250519075223.443266-1-jouni.hogander@intel.com
We want to get rid of triggering "Frame Change" events from
frontbuffer flush calls. We are about to move using TRANS_PUSH
register for this on LunarLake and onwards. Touching TRANS_PUSH
register from fronbuffer flush would be problematic as it's written by
DSB as well.
Fix this by using intel_psr_exit when flush or invalidate is done on
LunarLake and onwards. This is not possible on AlderLake and
MeteorLake due to HW bug in PSR2 disable.
This patch is also fixing problems with cursor plane where cursor is
disappearing or duplicate cursor is seen on the screen.
v2: Commit message updated
Bspec: 68927, 68934, 66624
Reported-by: Janna Martl <janna.martl109@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/5522
Fixes: 411ad63877 ("drm/i915/psr: Use SFF_CTL on invalidate/flush for LunarLake onwards")
Tested-by: Janna Martl <janna.martl109@gmail.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250801062905.564453-1-jouni.hogander@intel.com
Create a new unordered workqueue to be used by the display code
instead of relying on the i915 one. Then move all the unordered works
used in the display code to use this new queue.
Since this is an unordered workqueue, by definition there can't be any
order dependency with non-display works, so no extra care is needed
in regard to that.
This is part of the effort to isolate the display code from i915.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/20250620091632.1256135-1-luciano.coelho@intel.com
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This is a scripted split of the display related register macros from
i915_reg.h to display/intel_display_regs.h. As a starting point, move
all the macros that are only used in display code (or GVT). If there are
users in core i915 code or soc/, or no users anywhere, keep the macros
in i915_reg.h. This is done in groups of macros separated by blank
lines, moving the comments along with the groups.
Some manually picked macro groups are kept/moved regardless of the
heuristics above.
This is obviously a very crude approach. It's not perfect. But there are
4.2k lines in i915_reg.h, and its refactoring has ground to a halt. This
is the big hammer that splits the file to two, and enables further
cleanup.
Cc: Suraj Kandpal <suraj.kandpal@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> # v2
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250606102256.2080073-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently we are seeing these on PTL:
xe 0000:00:02.0: [drm] *ERROR* Timeout waiting for DDI BUF A to get active
These seem to be caused by writing ALPM registers while Panel Replay is
enabled.
Fix this by writing ALPM registers only when Panel Replay is about to be
enabled.
v4: improve comment on intel_psr_panel_replay_enable_sink call
v3: enable/disable ALPM from PSR code
Fixes: 172757acd6 ("drm/i915/lobf: Add lobf enablement in post plane update")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250513054814.3702977-3-jouni.hogander@intel.com
To deterministically capture the transition of the state machine going from
SRDOFFACK to IDLE, the delayed V. Blank should be at least one line after
the non-delayed V. Blank.
Ensure this by adding new interface into intel_psr to query number of lines
needed for vblank delay and call it from intel_crtc_vblank_delay.
v3: use existing intel_crtc_vblank_delay mechanism
v2: apply limits only when needed (VRR TG vs. Legacy TG)
Bspec: 69897
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Link: https://lore.kernel.org/r/20250423102704.1368310-1-jouni.hogander@intel.com
Enablement of LOBF is added in post plane update whenever
has_lobf flag is set. As LOBF can be enabled in non-psr
case as well so adding in post plane update. There is no
change of configuring alpm with psr path.
v1: Initial version.
v2: Use encoder-mask to find the associated encoder from
crtc-state. [Jani]
v3: Remove alpm_configure from intel_psr.c. [Jouni]
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/20250423092334.2294483-3-animesh.manna@intel.com
This patch is applying workaround for underrun on idle PSR HW issue
(Wa_16025596647) when PSR is getting enabled. It uses vblank enable/disable
status, DC5/6 enabled disabled and enabled pipes count information made
available.
This patch is also adding calls to dc5/dc6, vblank enable/disable and pipe
enable/disable notification functions as needed.
intel_psr_needs_block_dc_vblank is modified to get vblank enable/disable
notification on PSR capable system.
v2: use intel_dmc interface instead of directly writing dmc register
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-12-jouni.hogander@intel.com
To implement workaround for underrun on idle PSR HW issue (Wa_16025596647)
we need to know enabled. Figure out which non-PSR pipes we will have active
and store it into intel_crtc_state->active_non_psr_pipes. This is currently
assuming only one eDP on a time. I.e. possible secondary eDP with PSR
capable panel is not considered.
Bspec: 74151
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250414100508.1208774-3-jouni.hogander@intel.com
We have now seen this:
<4> [2120.434153] i915 0000:00:02.0: [drm] drm_WARN_ON(psr->paused)
<4> [2120.434196] WARNING: CPU: 3 PID: 4430 at drivers/gpu/drm/i915/display/intel_psr.c:2227 intel_psr_pause+0x16e/0x180 [i915]
Comment for drm_WARN_ON(display->drm, psr->paused) in intel_psr_pause says:
"If we ever hit this, we will need to add refcount to pause/resume"
This patch is implementing PSR pause/resume refcount.
v3: Incorporate changes missing from v2
v2: Add drm_warn for detecting possible unbalanced pause/resume
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250328080623.1183669-1-jouni.hogander@intel.com
