On systems that default to 'deep' some userspace software likes
to try to suspend in 'deep' first. If there is a failure for any
reason (such as -ENOMEM) the failure is ignored and then it will
try to use 's2idle' as a fallback. This fails, but more importantly
it leads to graphical problems.
Forbid this behavior and only allow suspending in the last state
supported by the system.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4093
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250408180957.4027643-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On chips that support user queues, setting this option
will disable kernel queues to be used to validate
user queues without kernel queues.
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can iterate across them when we need to manage
all user queues.
v2: add uq_mgr to adev list in amdgpu_userq_mgr_init
Reviewed-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add a field in struct amdgpu_mqd_prop for userqueue
secure sem fence address since now we have a generic
file for mes_userqueue.c
- Add secure sem fence address mqd support to gfx12 into
their corresponding init functions.
- Enable secure semaphore IRQ handling
V2: Address review comment from Alex:
Use fence_address instead of fenceaddress (Shashank)
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These are needed to make userqueue infrastructure generic.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds basic eviction fence framework for the gfx buffers.
The idea is to:
- One eviction fence is created per gfx process, at kms_open.
- This fence is attached to all the gem buffers created
by this process.
- This fence is detached to all the gem buffers at postclose_kms.
This framework will be further used for usermode queues.
V2: Addressed review comments from Christian
- keep fence_ctx and fence_seq directly in fpriv
- evcition_fence should be dynamically allocated
- do not save eviction fence instance in BO, there could be many
such fences attached to one BO
- use dma_resv_replace_fence() in detach
V3: Addressed review comments from Christian
- eviction fence create and destroy functions should be called
only once from fpriv create/destroy
- use dma_fence_put() in eviction_fence_destroy
V4: Addressed review comments from Christian:
- create a separate ev_fence_mgr structure
- cleanup fence init part
- do not add a domain for fence owner KGD
V5: Addressed review comments from Christian:
- drop the dma_fence_is_signaled check
- use a local variable to access evf_mgr->ev_fence under the
spin_lock() multiple places
- remove the vm->is_compute_ctx check to attach gfx eviction fence,
in gem_object_open
V6: Addressed review comments from Christian:
- drop the return value from eviction_fence_signal
- reserve_fence should be the first thing inside the
attach_eviction_fence function, also keep the resv_add_fence inside
the lock
- remove the unwanted ev_fence check inside detach function
- fix wrong variable check in eviction_fence_init function
- return the error value of eviction_fence_init to the caller, dont
keep it void.
- fail gem_object_open if attaching of eviction_fence fails
- detach the eviction fence only when amdgpu_vm_is_bo_always_valid
is not true.
V7: Addressed review comments from Christian:
- Do not add a uq_mgr ptr in ev_fence, rather add evf_mgr
V8: Move eviction fence enabling into separate patch for CI
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Arvind Yadav <arvind.yadav@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch introduces new IOCTL for userqueue secure semaphore.
The signal IOCTL called from userspace application creates a drm
syncobj and array of bo GEM handles and passed in as parameter to
the driver to install the fence into it.
The wait IOCTL gets an array of drm syncobjs, finds the fences
attached to the drm syncobjs and obtain the array of
memory_address/fence_value combintion which are returned to
userspace.
v2: (Christian)
- Install fence into GEM BO object.
- Lock all BO's using the dma resv subsystem
- Reorder the sequence in signal IOCTL function.
- Get write pointer from the shadow wptr
- use userq_fence to fetch the va/value in wait IOCTL.
v3: (Christian)
- Use drm_exec helper for the proper BO drm reserve and avoid BO
lock/unlock issues.
- fence/fence driver reference count logic for signal/wait IOCTLs.
v4: (Christian)
- Fixed the drm_exec calling sequence
- use dma_resv_for_each_fence_unlock if BO's are not locked
- Modified the fence_info array storing logic.
v5: (Christian)
- Keep fence_drv until wait queue execution.
- Add dma_fence_wait for other fences.
- Lock BO's using drm_exec as the number of fences in them could
change.
- Install signaled fences as well into BO/Syncobj.
- Move Syncobj fence installation code after the drm_exec_prepare_array.
- Directly add dma_resv_usage_rw(args->bo_flags....
- remove unnecessary dma_fence_put.
v6: (Christian)
- Add xarray stuff to store the fence_drv
- Implement a function to iterate over the xarray and drop
the fence_drv references.
- Add drm_exec_until_all_locked() wrapper
- Add a check that if we haven't exceeded the user allocated num_fences
before adding dma_fence to the fences array.
v7: (Christian)
- Use memdup_user() for kmalloc_array + copy_from_user
- Move the fence_drv references from the xarray into the newly created fence
and drop the fence_drv references when we signal this fence.
- Move this locking of BOs before the "if (!wait_info->num_fences)",
this way you need this code block only once.
- Merge the error handling code and the cleanup + return 0 code.
- Initializing the xa should probably be done in the userq code.
- Remove the userq back pointer stored in fence_drv.
- Pass xarray as parameter in amdgpu_userq_walk_and_drop_fence_drv()
v8: (Christian)
- Move fence_drv references must come before adding the fence to the list.
- Use xa_lock_irqsave_nested for nested spinlock operations.
- userq_mgr should be per fpriv and not one per device.
- Restructure the interrupt process code for the early exit of the loop.
- The reference acquired in the syncobj fence replace code needs to be
kept around.
- Modify the dma_fence acquire placement in wait IOCTL.
- Move USERQ_BO_WRITE flag to UAPI header file.
- drop the fence drv reference after telling the hw to stop accessing it.
- Add multi sync object support to userq signal IOCTL.
V9: (Christian)
- Store all the fence_drv ref to other drivers and not ourself.
- Remove the userq fence xa implementation and replace with
kvmalloc_array.
v10: (Christian)
- Add a comment for the userq_xa xarray
- drop the if check of userq_fence->fence_drv_array
- use the i variable to initialize userq_fence->fence_drv_array_count
- drop the fence reference before you free the array in the error handling,
otherwise it could be that some references leaked.
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds IP independent skeleton code for amdgpu
usermode queue. It contains:
- A new files with init functions of usermode queues.
- A queue context manager in driver private data.
V1: Worked on design review comments from RFC patch series:
(https://patchwork.freedesktop.org/series/112214/)
- Alex: Keep a list of queues, instead of single queue per process.
- Christian: Use the queue manager instead of global ptrs,
Don't keep the queue structure in amdgpu_ctx
V2:
- Reformatted code, split the big patch into two
V3:
- Integration with doorbell manager
V4:
- Align the structure member names to the largest member's column
(Luben)
- Added SPDX license (Luben)
V5:
- Do not add amdgpu.h in amdgpu_userqueue.h (Christian).
- Move struct amdgpu_userq_mgr into amdgpu_userqueue.h (Christian).
V6: Rebase
V9: Rebase
V10: Rebase + Alex's R-B
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a new parameter to disable BAR resizing. Note that this
only disables the driver from attempting to resize the BAR,
The BIOS may have resized the BAR at boot.
Some teams have found this useful in debugging P2P DMA
issues on systems where the available MMIO space did not allow
for all of the GPUs present to resize their BARs.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DPC recover based on refactored code
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Split amdgpu_device_gpu_recover into the following stages:
halt activities,asic reset,schedule resume and amdgpu resume.
The reason is that the subsequent addition of dpc recover
code will have a high similarity with gpu reset
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KIQ invalidate_tlbs request has been seen to marginally exceed the
configured 100 ms timeout on systems under load.
All other KIQ requests in the driver use a 10 second timeout. Use a
similar timeout implementation on the invalidate_tlbs path.
v2: Poll once before msleep
v3: Fix return value
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limiting the number of available VMIDs to enforce isolation causes some
issues with gang submit and applying certain HW workarounds which
require multiple VMIDs to work correctly.
So instead start to track all submissions to the relevant engines in a
per partition data structure and use the dma_fences of the submissions
to enforce isolation similar to what a VMID limit does.
v2: use ~0l for jobs without isolation to distinct it from kernel
submissions which uses NULL for the owner. Add some warning when we
are OOM.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prior to the addition of ring reset, the debug option
`debug_disable_soft_recovery` could be used to force a full device
reset. Now that we have ring reset, create a debug option to disable
them in amdgpu, forcing the driver to go with the full device
reset path again when both options are combined.
This option is useful for testing and debugging purposes when one wants
to test the full reset from userspace.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable GECC only when the default memory ECC mode or
the module parameter amdgpu_ras_enable is activated.
v2: Add kernel message to remind users explicitly set
amdgpu_ras_enable=1 before driver loading to enable GECC
and set amdgpu_ras_enable=0 to disable GECC when GECC is
currently enabled if needed.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce utility functions designed to assist
in populating CPER records.
v2: call cper_init/fini in device_ip_init/fini.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On big and small APUs we send KFD VRAM allocations to GTT
since the carve out is either non-existent or relatively
small. However, if someone sets the carve out size to be
relatively large, we may end up using GTT rather than VRAM.
No change of logic with this patch, but it allows the
driver to determine which logic to use based on the
carve out size in the future.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use bios_release wrapper to release memory allocated for vbios image and
reset the variables.
v2:
Use the same wrapper for clean up in sw_fini (Alex Deucher)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This partially reverts commit 194eb174cb.
This commit introduced a new state variable into adev without even
remotely worrying about CPU barriers.
Since we already have the amdgpu_in_reset() function exactly for this
use case partially revert that.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When device needs to be reset before initialization, it's not required
for all IPs to be initialized before a reset. In such cases, it needs to
identify whether the IP/feature is initialized for the first time or
whether it's reinitialized after a reset.
Add RESET_RECOVERY init level to identify post reset reinitialization
phase. This only provides a device level identification, IP/features may
choose to track their state independently also.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add two sysfs interfaces for gfx and compute:
gfx_reset_mask
compute_reset_mask
These interfaces are read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
v4: Fixing uninitialized variables (Tim)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure KFD gets a turn when serializing access to
the GC IP. Currently non-KFD jobs can starve KFD if they
submit often enough. This patch prevents that by stalling
non-KFD if its time period has elapsed.
v2: fix units
v3: check enablement properly
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To check the status of S3 suspend completion,
use the PM core pm_suspend_global_flags bit(1)
to detect S3 abort events. Therefore, clean up
the AMDGPU driver's private flag suspend_complete.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before making a function call to resume, validate
the function pointer like we do in sw_init.
Use the helper function amdgpu_ip_block_resume where
same checks and calls are repeated.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before making a function call to suspend, validate
the function pointer like we do in sw_init.
Use the helper function amdgpu_ip_block_suspend where
same checks and calls are repeated.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop delayed reset work handler as it is no longer used.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_atpx_dgpu_req_power_for_displays has been unused since
commit bdb1ccb080 ("drm/amdgpu: remove ATPX_DGPU_REQ_POWER_FOR_DISPLAYS
check when hotplug-in")
amdgpu_atpx_get_dhandle has been unused since commit
f9b7f3703f ("drm/amdgpu/acpi: make ATPX/ATCS structures global (v2)")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_device_ip_is_idle is unused.
It was renamed from 'amdgpu_is_idle' which was originally added in
commit 5dbbb60ba6 ("drm/amdgpu: add IP helpers for wait_for_idle and is_idle")
but hasn't been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In some cases, device needs to be reset before first use. Add handlers
for doing device reset during driver init sequence.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <feifxu@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To handle amdgpu_device reference for different GPUs
we add it's reference in each ip block which can be
used to differentiate between difference gpu devices.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the reinitialization part after a reset to another function. No
functional changes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add init levels to define the level to which device needs to be
initialized.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helper function to check if ip block is enabled
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was only used as workaround for recovering the page tables after
VRAM was lost and is no longer necessary after the function
amdgpu_vm_bo_reset_state_machine() started to do the same.
Compute never used shadows either, so the only proplematic case left is
SVM and that is most likely not recoverable in any way when VRAM is
lost.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enables users to update SVM's default granularity, used in
buffer migration and handling of recoverable page faults.
Param value is set in terms of log(numPages(buffer)),
e.g. 9 for a 2 MIB buffer
Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add this flag to enable experimental resets for testing before they
are fully validated.
Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces the Enforce Isolation Handler designed to enforce
shader isolation on AMD GPUs, which helps to prevent data leakage
between different processes.
The handler counts the number of emitted fences for each GFX and compute
ring. If there are any fences, it schedules the `enforce_isolation_work`
to be run after a delay of `GFX_SLICE_PERIOD`. If there are no fences,
it signals the Kernel Fusion Driver (KFD) to resume the runqueue.
The function is synchronized using the `enforce_isolation_mutex`.
This commit also introduces a reference count mechanism
(kfd_sch_req_count) to keep track of the number of requests to enable
the KFD scheduler. When a request to enable the KFD scheduler is made,
the reference count is decremented. When the reference count reaches
zero, a delayed work is scheduled to enforce isolation after a delay of
GFX_SLICE_PERIOD.
When a request to disable the KFD scheduler is made, the function first
checks if the reference count is zero. If it is, it cancels the delayed
work for enforcing isolation and checks if the KFD scheduler is active.
If the KFD scheduler is active, it sends a request to stop the KFD
scheduler and sets the KFD scheduler state to inactive. Then, it
increments the reference count.
The function is synchronized using the kfd_sch_mutex to ensure that the
KFD scheduler state and reference count are updated atomically.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a new sysfs attribute 'enforce_isolation' to control
the 'enforce_isolation' setting per GPU. The attribute can be read and
written, and accepts values 0 (disabled) and 1 (enabled).
When 'enforce_isolation' is enabled, reserved VMIDs are allocated for
each ring. When it's disabled, the reserved VMIDs are freed.
The set function locks a mutex before changing the 'enforce_isolation'
flag and the VMIDs, and unlocks it afterwards. This ensures that these
operations are atomic and prevents race conditions and other concurrency
issues.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit makes enforce_isolation setting to be per GPU and per
partition by adding the enforce_isolation array to the adev structure.
The adev variable is set based on the global enforce_isolation module
parameter during device initialization.
In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU
is used to determine whether to enforce isolation between graphics and
compute processes on that GPU.
In amdgpu_ids.c, the adev->enforce_isolation value for the current GPU
and partition is used to determine whether to enforce isolation between
graphics and compute processes on that GPU and partition.
This allows the enforce_isolation setting to be controlled individually
for each GPU and each partition, which is useful in a system with
multiple GPUs and partitions where different isolation settings might be
desired for different GPUs and partitions.
v2: fix loop in amdgpu_vmid_mgr_init() (Alex)
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
amdgpu_gart_table_vram_pin() and amdgpu_gart_table_vram_unpin() has
been removed since commit 575e55ee4f ("drm/amdgpu: recover gart table
at resume") remain the declarations untouched in the header files.
Besides, amdgpu_dm_display_resume() has also beed removed since
commit a80aa93de1 ("drm/amd/display: Unify dm resume sequence into a
single call"). So, let's remove this unused declarations.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
KIQ timeouts no longer seen.
This reverts commit 3a19a8af64.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove the implementation of struct drm_driver.lastclose. The hook
was only necessary before in-kernel DRM clients existed, but is now
obsolete. The code in amdgpu_driver_lastclose_kms() is performed by
drm_lastclose().
v2:
- update commit message
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-3-tzimmermann@suse.de
debugfs register list for dump is cleaned as it have
some issues related to proper power state of the IP
before register read.
Since the above mentioned is removed we no longer want
this to be dumped part of the devcoredump and hence
removed.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new config option and set proper dependencies for ISP.
v2: add missed guards, drop separate Kconfig
Reviewed-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Pratap Nirujogi <pratap.nirujogi@amd.com>
Add the isp driver in amdgpu to support ISP device on the APUs that
supports ISP IP block. ISP hw block is used for camera front-end, pre
and post processing operations.
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP hw block is supported in some of the AMD GPU versions, add support
to discover ISP IP in amdgpu_discovery.
v2: squash in documentation update (Alex)
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit d3620eeae8.
Revert this due to a final solution:
commit ed3165d660 ("drm/amdgpu/jpeg5: reprogram doorbell setting after power up for each playback")
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Sonny Jiang <sonjiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to ensure that even when using a reserved VMID that the gang
members can still run in parallel.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
