Test that we can read with MSG_F_PEEK and then still get correct number
of available bytes through FIONREAD. The recv() (without PEEK) then
returns the bytes as expected. The recv() always worked though because
it was just the available byte reporting that was broke before latest
fixes.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20230926035300.135096-4-john.fastabend@gmail.com
The lkdtm selftest config fragment enables CONFIG_UBSAN_TRAP to make the
ARRAY_BOUNDS test kill the calling process when an out-of-bound access
is detected by UBSAN. However, after this [1] commit, UBSAN is triggered
under many new scenarios that weren't detected before, such as in struct
definitions with fixed-size trailing arrays used as flexible arrays. As
a result, CONFIG_UBSAN_TRAP=y has become a very aggressive option to
enable except for specific situations.
`make kselftest-merge` applies CONFIG_UBSAN_TRAP=y to the kernel config
for all selftests, which makes many of them fail because of system hangs
during boot.
This change removes the config option from the lkdtm kselftest and
configures the ARRAY_BOUNDS test to look for UBSAN reports rather than
relying on the calling process being killed.
[1] commit 2d47c6956a ("ubsan: Tighten UBSAN_BOUNDS on GCC")'
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230802063252.1917997-1-ricardo.canuelo@collabora.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Upon a panic() the kernel will use either smp_send_stop() or
crash_smp_send_stop() to attempt to stop secondary CPUs via an IPI,
which may or may not be an NMI. Generally it's preferable that this is an
NMI so that CPUs can be stopped in as many situations as possible, but
it's not always possible to provide an NMI, and there are cases where
CPUs may be unable to handle the NMI regardless.
This patch adds a test for panic() where all other CPUs are stuck with
interrupts disabled, which can be used to check whether the kernel
gracefully handles CPUs failing to respond to a stop, and whether NMIs
actually work to stop CPUs.
For example, on arm64 *without* an NMI, this results in:
| # echo PANIC_STOP_IRQOFF > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry PANIC_STOP_IRQOFF
| Kernel panic - not syncing: panic stop irqoff test
| CPU: 2 PID: 24 Comm: migration/2 Not tainted 6.5.0-rc3-00077-ge6c782389895-dirty #4
| Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
| Stopper: multi_cpu_stop+0x0/0x1a0 <- stop_machine_cpuslocked+0x158/0x1a4
| Call trace:
| dump_backtrace+0x94/0xec
| show_stack+0x18/0x24
| dump_stack_lvl+0x74/0xc0
| dump_stack+0x18/0x24
| panic+0x358/0x3e8
| lkdtm_PANIC+0x0/0x18
| multi_cpu_stop+0x9c/0x1a0
| cpu_stopper_thread+0x84/0x118
| smpboot_thread_fn+0x224/0x248
| kthread+0x114/0x118
| ret_from_fork+0x10/0x20
| SMP: stopping secondary CPUs
| SMP: failed to stop secondary CPUs 0-3
| Kernel Offset: 0x401cf3490000 from 0xffff80008000000c0
| PHYS_OFFSET: 0x40000000
| CPU features: 0x00000000,68c167a1,cce6773f
| Memory Limit: none
| ---[ end Kernel panic - not syncing: panic stop irqoff test ]---
Note the "failed to stop secondary CPUs 0-3" message.
On arm64 *with* an NMI, this results in:
| # echo PANIC_STOP_IRQOFF > /sys/kernel/debug/provoke-crash/DIRECT
| lkdtm: Performing direct entry PANIC_STOP_IRQOFF
| Kernel panic - not syncing: panic stop irqoff test
| CPU: 1 PID: 19 Comm: migration/1 Not tainted 6.5.0-rc3-00077-ge6c782389895-dirty #4
| Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
| Stopper: multi_cpu_stop+0x0/0x1a0 <- stop_machine_cpuslocked+0x158/0x1a4
| Call trace:
| dump_backtrace+0x94/0xec
| show_stack+0x18/0x24
| dump_stack_lvl+0x74/0xc0
| dump_stack+0x18/0x24
| panic+0x358/0x3e8
| lkdtm_PANIC+0x0/0x18
| multi_cpu_stop+0x9c/0x1a0
| cpu_stopper_thread+0x84/0x118
| smpboot_thread_fn+0x224/0x248
| kthread+0x114/0x118
| ret_from_fork+0x10/0x20
| SMP: stopping secondary CPUs
| Kernel Offset: 0x55a9c0bc0000 from 0xffff800080000000
| PHYS_OFFSET: 0x40000000
| CPU features: 0x00000000,68c167a1,fce6773f
| Memory Limit: none
| ---[ end Kernel panic - not syncing: panic stop irqoff test ]---
Note the absence of a "failed to stop secondary CPUs" message, since we
don't log anything when secondary CPUs are successfully stopped.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230921161634.4063233-1-mark.rutland@arm.com
Signed-off-by: Kees Cook <keescook@chromium.org>
Test that nat engine resolves the source port clash and tcp packet
is passed to the correct socket.
While at it, get rid of the iperf3 dependency, just use socat for
listener side too.
Signed-off-by: Florian Westphal <fw@strlen.de>
Update the documentation to reflect the changes made to tdc with regards
to minimal requirements and test definitions expectations.
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use a Python process pool to run the tests in parallel.
Not all tests can run in parallel, for instance tests that are not
namespaced and tests that use netdevsim, as they can conflict with one
another.
The code logic will split the tests into serial and parallel.
For the parallel tests, we build batches of 32 tests and queue each
batch on the process pool. For the serial tests, they are queued as a
whole into the process pool, which in turn executes them concurrently
with the parallel tests.
Even though the tests serialize on rtnl_lock in the kernel, this feature
showed results with a ~3x speedup on the wall time for the entire test suite
running in a VM:
Before - 4m32.502s
After - 1m19.202s
Examples:
In order to run tdc using 4 processes:
./tdc.py -J4 <...>
In order to run tdc using 1 process:
./tdc.py -J1 <...> || ./tdc.py <...>
Note that the kernel configuration will affect the speed of the tests,
especially if such configuration slows down process creation and/or
fork().
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With resources localized on a per test basis, some tests definitions
either contain redundant commands, were wrong or could be simplified.
Update all of them to match the new requirements.
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As of today, the current tdc architecture creates one netns and uses it
to run all tests. This assumption was embedded into the nsPlugin which
carried over as how the tests were written.
The tdc tests are by definition self contained and can,
theoretically, run in parallel. Even though in the kernel they will
serialize over the rtnl lock, we should expect a significant speedup of the
total wall time for the entire test suite, which is hitting close to
1100 tests at this point.
A first step to achieve this goal is to remove sharing of global resources like
veth/dummy interfaces and the netns. In this patch we 'localize' these
resources on a per test basis. Each test gets it's own netns, VETH/dummy interfaces.
The resources are spawned in the pre_suite phase, where tdc will prepare
all netns and interfaces for all tests. This is done in order to avoid
concurrency issues with netns / interfaces spawning and commands using
them. As tdc progresses, the resources are deleted after each test finishes
executing.
Tests that don't use the nsPlugin still run under the root namespace,
but are now required to manage any external resources like interfaces.
These cannot be parallelized as their definition doesn't allow it.
On the other hand, when using the nsPlugin, tests don't need to create
dummy/veth interfaces as these are handled already.
Tested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When building with Clang, I am getting many warnings from the selftests/rseq tree.
Here's one such example from rseq tree:
| param_test.c🔢10: error: address argument to atomic operation must be a pointer to _Atomic type ('intptr_t *' (aka 'long *') invalid)
| 1234 | while (!atomic_load(&args->percpu_list_ptr)) {}
| | ^ ~~~~~~~~~~~~~~~~~~~~~~
| /usr/local/google/home/justinstitt/repos/tc-build/build/llvm/final/lib/clang/18/include/stdatomic.h:140:29: note: expanded from macro 'atomic_load'
| 140 | #define atomic_load(object) __c11_atomic_load(object, __ATOMIC_SEQ_CST)
| | ^ ~~~~~~
Use compiler builtins `__atomic_load_n()` and `__atomic_store_n()` with
accompanying __ATOMIC_ACQUIRE and __ATOMIC_RELEASE, respectively. This
will fix the warnings because the compiler builtins do not expect their
arguments to have _Atomic type. This should also make TSAN happier.
Link: https://github.com/ClangBuiltLinux/linux/issues/1698
Link: https://github.com/ClangBuiltLinux/continuous-integration2/issues/61
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When running the test for the damon subsystem, there are a lot of
warnings because test scripts do not have executable permission,
for example:
Warning: file debugfs_attrs.sh is not executable
Warning: file debugfs_schemes.sh is not executable
Warning: file debugfs_target_ids.sh is not executable
...
This patch adds executable permission to test scripts to eliminate
these warnings.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The 'uevents' subdirectory does not exist in tools/testing/selftests/
and adding 'uevents' to the TARGETS list results in the following error:
make[1]: Entering directory 'xx/tools/testing/selftests/uevents'
make[1]: *** No targets specified and no makefile found. Stop.
make[1]: Leaving directory 'xx/tools/testing/selftests/uevents'
What actually exists in tools/testing/selftests/ is the 'uevent'
subdirectory.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The point in iterating variant->mock_domains is to test the idev_ids[0]
and idev_ids[1]. So use it instead of keeping testing idev_ids[0] only.
Link: https://lore.kernel.org/r/20230919011637.16483-1-nicolinc@nvidia.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
This kselftest fixes update for Linux 6.6-rc4 consists of one
single fix to unmount tracefs when test created mount.
-----BEGIN PGP SIGNATURE-----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=5LK8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"One single fix to unmount tracefs when test created mount"
* tag 'linux-kselftest-fixes-6.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/user_events: Fix to unmount tracefs when test created mount
Adding selftest that puts kprobe on bpf_fentry_test1 that calls bpf_printk
and invokes bpf_trace_printk tracepoint. The bpf_trace_printk tracepoint
has test[234] programs attached to it.
Because kprobe execution goes through bpf_prog_active check, programs
attached to the tracepoint will fail the recursion check and increment the
recursion_misses stats.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-10-jolsa@kernel.org
Adding selftest that puts kprobe.multi on bpf_fentry_test1 that
calls bpf_kfunc_common_test kfunc which has 3 perf event kprobes
and 1 kprobe.multi attached.
Because fprobe (kprobe.multi attach layear) does not have strict
recursion check the kprobe's bpf_prog_active check is hit for test2-5.
Disabling this test for arm64, because there's no fprobe support yet.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-9-jolsa@kernel.org
Adding test that puts kprobe on bpf_fentry_test1 that calls
bpf_kfunc_common_test kfunc, which has also kprobe on.
The latter won't get triggered due to kprobe recursion check
and kprobe missed counter is incremented.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-8-jolsa@kernel.org
In the ZA and ZT test programs we explicitly validate that PSTATE.ZA is as
expected on each loop but we do not do the equivalent for our streaming
SVE test, add a check that we are still in streaming mode on every loop
in case that goes wrong.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230922-arm64-ssve-validate-svcr-v1-1-f518960eaeda@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
* Fix EL2 Stage-1 MMIO mappings where a random address was used
* Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
* Fix KVM_GET_REG_LIST API for ISA_EXT registers
* Fix reading ISA_EXT register of a missing extension
* Fix ISA_EXT register handling in get-reg-list test
* Fix filtering of AIA registers in get-reg-list test
x86:
* Fixes for TSC_AUX virtualization
* Stop zapping page tables asynchronously, since we don't
zap them as often as before
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUQU5YUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNcdwf/X8eHQ5yfAE0J70xs4VZ1z7B8i77q
P54401z/q0FyQ4yyTHwbUv/FgVYscZ0efYogrkd3uuoPNtLmN2xKj1tM95A2ncP/
v318ljevZ0FWZ6J471Xu9MM3u15QmjC3Wai9z6IP4tz0S2rUhOYTJdFqlNf6gQSu
P8n9l2j3ZLAiUNizXa8M7350gCUFCBi37dvLLVTYOxbu17hZtmNjhNpz5G7YNc9y
zmJIJh30ZnMGUgMylLfcW0ZoqQFNIkNg3yyr9YjY68bTW5aspXdhp9u0zI+01xYF
sT+tOXBPPLi9MBuckX+oLMsvNXEZWxos2oMow3qziMo83neG+jU+WhjLHg==
=+sqe
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix EL2 Stage-1 MMIO mappings where a random address was used
- Fix SMCCC function number comparison when the SVE hint is set
RISC-V:
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
x86:
- Fixes for TSC_AUX virtualization
- Stop zapping page tables asynchronously, since we don't zap them as
often as before"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Do not use user return MSR support for virtualized TSC_AUX
KVM: SVM: Fix TSC_AUX virtualization setup
KVM: SVM: INTERCEPT_RDTSCP is never intercepted anyway
KVM: x86/mmu: Stop zapping invalidated TDP MMU roots asynchronously
KVM: x86/mmu: Do not filter address spaces in for_each_tdp_mmu_root_yield_safe()
KVM: x86/mmu: Open code leaf invalidation from mmu_notifier
KVM: riscv: selftests: Selectively filter-out AIA registers
KVM: riscv: selftests: Fix ISA_EXT register handling in get-reg-list
RISC-V: KVM: Fix riscv_vcpu_get_isa_ext_single() for missing extensions
RISC-V: KVM: Fix KVM_GET_REG_LIST API for ISA_EXT registers
KVM: selftests: Assert that vasprintf() is successful
KVM: arm64: nvhe: Ignore SVE hint in SMCCC function ID
KVM: arm64: Properly return allocated EL2 VA from hyp_alloc_private_va_range()
This commit does the long-overdue conversion of the parse-console.sh
file to use mktemp to create its temporary directory.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit adds a --debug-info argument to kvm.sh in order to ease
interpretation of addresses printed on the console and the like.
This argument also disables KASLR.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
In torture.sh, the testing of refscale incorrectly used verbose_batched
as a kernel boot parameter, which causes this parameter to be passed
to the init process. This commit therefore prefixes it with refscale,
so that refscale.verbose_batched is passed to the kernel.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
When debugging, it can be difficult to quickly find the ftrace dump
within the console log, which in turn makes it difficult to process it
independent of the rest of the console output. This commit therefore
copies the contents of the buffers into its own file to make it easier
to locate and process the ftrace dump. The original ftrace dump is still
available in the console log in cases because it can be more convenient
to process it in situ, for example, for scripts that process console
output as well as ftrace-dump data.
Also handle the case of multiple ftrace dumps potentially showing up in the
log. Example for a file like [1], it will extract as [2].
[1]:
foo
foo
Dumping ftrace buffer:
---------------------------------
blah
blah
---------------------------------
more
bar
baz
Dumping ftrace buffer:
---------------------------------
blah2
blah2
---------------------------------
bleh
bleh
[2]:
Ftrace dump 1:
blah
blah
Ftrace dump 2:
blah2
blah2
[ paulmck: Fixed awk indentation, input up front. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit adds CONFIG_DEBUG_OBJECTS=y to the TRACE02 rcutorture scenario
to catch any further RCU Tasks bugs involving this Kconfig option.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
This commit switches from the old "/tmp/kvm-recheck.sh.$$" approach to
the newer and now reliable "mktemp" approach.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
cc:stable.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZQ8hRwAKCRDdBJ7gKXxA
jlK9AQDzT/FUQV3kIshsV1IwAKFcg7gtcFSN0vs+pV+e1+4tbQD/Z2OgfGFFsCSP
X6uc2cYHc9DG5/o44iFgadW8byMssQs=
=w+St
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 10 of which pertain to post-6.5 issues. The other three
are cc:stable"
* tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: nommu: fix empty /proc/<pid>/maps
filemap: add filemap_map_order0_folio() to handle order0 folio
proc: nommu: /proc/<pid>/maps: release mmap read lock
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
pidfd: prevent a kernel-doc warning
argv_split: fix kernel-doc warnings
scatterlist: add missing function params to kernel-doc
selftests/proc: fixup proc-empty-vm test after KSM changes
revert "scripts/gdb/symbols: add specific ko module load command"
selftests: link libasan statically for tests with -fsanitize=address
task_work: add kerneldoc annotation for 'data' argument
mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEZdn75s5e6LHDQ+f/rUjsVaLHLAcFAmUMDssACgkQrUjsVaLH
LAckSg/+IZ5DPvPs81rUpL3i1Z5SrK4jXWL2zyvMIksBEYmFD2NPNvinVZ4Sxv6u
IzWNKJcAp4nA/+qPGPLXCURDe1W6PCDvO4SShjYm2UkPtNIfiskmFr3MunXZysgm
I7USJgj9ev+46yfOnwlYrwpZ8sQk7Z6nLTI/6Osk4Q7Sm0Vjoobh6krub7LNjeKQ
y6p+vxrXj+Owc5H9bgl0wAi6GOmOJKAM+cZU5DygQxjOgiUgNbOzsVgbLDTvExNq
gISUU4PoAO7/U1NKEaaopbe7C0KNQHTnegedtXsDzg7WTBah77/MNBt4snbfiR27
6rODklZlG/kAGIHdVtYC+zf8AfPqvGTIT8SLGmzQlyVlHujFBGn0L41NmMzW+EeA
7UpfUk8vPiiGhefBE+Ml3yqiReogo+aRhL1mZoI39rPusd7DMnwx97KpBlAcYuTI
PTgqycIMRmq2dSCHya+nrOVpwwV3Qx4G8Alpq1jOa7XDMeGMj4h521NQHjWckIK2
IJ2a0RtzB10+Z91nLV+amdAno326AnxJC7dR26O6uqVSPJy/nHE2GAc49gFKeWq6
QmzgzY1sU2Y02/TM8miyKSl3i+bpZSIPzXCKlOm1TowBKO+sfJzn/yMon9sVaVhb
4Wjgg3vgE74y9FVsL4JXR/PfrZH5Aq77J1R+/pMtsNTtVYrt1Sk=
=ytFs
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-fixes-6.6-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv fixes for 6.6, take #1
- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test
This exercises the newly added dynsym symbol versioning logics.
Now we accept symbols in form of func, func@LIB_VERSION or
func@@LIB_VERSION.
The test rely on liburandom_read.so. For liburandom_read.so, we have:
$ nm -D liburandom_read.so
w __cxa_finalize@GLIBC_2.17
w __gmon_start__
w _ITM_deregisterTMCloneTable
w _ITM_registerTMCloneTable
0000000000000000 A LIBURANDOM_READ_1.0.0
0000000000000000 A LIBURANDOM_READ_2.0.0
000000000000081c T urandlib_api@@LIBURANDOM_READ_2.0.0
0000000000000814 T urandlib_api@LIBURANDOM_READ_1.0.0
0000000000000824 T urandlib_api_sameoffset@LIBURANDOM_READ_1.0.0
0000000000000824 T urandlib_api_sameoffset@@LIBURANDOM_READ_2.0.0
000000000000082c T urandlib_read_without_sema@@LIBURANDOM_READ_1.0.0
00000000000007c4 T urandlib_read_with_sema@@LIBURANDOM_READ_1.0.0
0000000000011018 D urandlib_read_with_sema_semaphore@@LIBURANDOM_READ_1.0.0
For `urandlib_api`, specifying `urandlib_api` will cause a conflict because
there are two symbols named urandlib_api and both are global bind.
For `urandlib_api_sameoffset`, there are also two symbols in the .so, but
both are at the same offset and essentially they refer to the same function
so no conflict.
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230918024813.237475-4-hengqi.chen@gmail.com
In order to use run_kselftest.sh the list of tests must be emitted to
populate kselftest-list.txt.
The powerpc Makefile is written to use EMIT_TESTS. But support for
EMIT_TESTS was dropped in commit d4e59a536f ("selftests: Use runner.sh
for emit targets"). Although prior to that commit a548de0fe8
("selftests: lib.mk: add test execute bit check to EMIT_TESTS") had
already broken run_kselftest.sh for powerpc due to the executable check
using the wrong path.
It can be fixed by replacing the EMIT_TESTS definitions with actual
emit_tests rules in the powerpc Makefiles. This makes run_kselftest.sh
able to run powerpc tests:
$ cd linux
$ export ARCH=powerpc
$ export CROSS_COMPILE=powerpc64le-linux-gnu-
$ make headers
$ make -j -C tools/testing/selftests install
$ grep -c "^powerpc" tools/testing/selftests/kselftest_install/kselftest-list.txt
182
Fixes: d4e59a536f ("selftests: Use runner.sh for emit targets")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230921072623.828772-1-mpe@ellerman.id.au
Enable all selftests, except the 2 that have to do with the userspace
unwinding, and the new exceptions test, in the s390x CI.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-11-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prepare the ldsx test to run on big-endian systems by adding the
necessary endianness checks around narrow memory accesses.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_progs -t bind_perm,bpf_obj_pinning/mounted-str-rel fails when
the selftests directory is mounted under /mnt, which is a reasonable
thing to do when sharing the selftests residing on the host with a
virtual machine, e.g., using 9p.
The reason is that cgroup2 is mounted at /mnt and not unmounted,
causing subsequent tests that need to access the selftests directory
to fail.
Fix by unmounting it. The kernel maintains a mount stack, so this
reveals what was mounted there before. Introduce cgroup_workdir_mounted
in order to maintain idempotency. Make it thread-local in order to
support test_progs -j.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919101336.2223655-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=AoVg
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter and bpf.
Current release - regressions:
- bpf: adjust size_index according to the value of KMALLOC_MIN_SIZE
- netfilter: fix entries val in rule reset audit log
- eth: stmmac: fix incorrect rxq|txq_stats reference
Previous releases - regressions:
- ipv4: fix null-deref in ipv4_link_failure
- netfilter:
- fix several GC related issues
- fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
- eth: team: fix null-ptr-deref when team device type is changed
- eth: i40e: fix VF VLAN offloading when port VLAN is configured
- eth: ionic: fix 16bit math issue when PAGE_SIZE >= 64KB
Previous releases - always broken:
- core: fix ETH_P_1588 flow dissector
- mptcp: fix several connection hang-up conditions
- bpf:
- avoid deadlock when using queue and stack maps from NMI
- add override check to kprobe multi link attach
- hsr: properly parse HSRv1 supervisor frames.
- eth: igc: fix infinite initialization loop with early XDP redirect
- eth: octeon_ep: fix tx dma unmap len values in SG
- eth: hns3: fix GRE checksum offload issue"
* tag 'net-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
sfc: handle error pointers returned by rhashtable_lookup_get_insert_fast()
igc: Expose tx-usecs coalesce setting to user
octeontx2-pf: Do xdp_do_flush() after redirects.
bnxt_en: Flush XDP for bnxt_poll_nitroa0()'s NAPI
net: ena: Flush XDP packets on error.
net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()
net: hinic: Fix warning-hinic_set_vlan_fliter() warn: variable dereferenced before check 'hwdev'
netfilter: ipset: Fix race between IPSET_CMD_CREATE and IPSET_CMD_SWAP
netfilter: nf_tables: fix memleak when more than 255 elements expired
netfilter: nf_tables: disable toggling dormant table state more than once
vxlan: Add missing entries to vxlan_get_size()
net: rds: Fix possible NULL-pointer dereference
team: fix null-ptr-deref when team device type is changed
net: bridge: use DEV_STATS_INC()
net: hns3: add 5ms delay before clear firmware reset irq source
net: hns3: fix fail to delete tc flower rules during reset issue
net: hns3: only enable unicast promisc when mac table full
net: hns3: fix GRE checksum offload issue
net: hns3: add cmdq check for vf periodic service task
net: stmmac: fix incorrect rxq|txq_stats reference
...
Fix several compilation errors and warnings in memblock tests
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmUL2P0QHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kSniB/9crPnn5y/AvzqA/AiRAvK9pbYj8t3lZyRC
PFvqHqg6OOQA2AN7VHcxaty6nMYMnr6Myk8lxmY45tpW6wp16XcFtoGYZAllBwTm
GoqyhRnREDHp7Z0FtKFGcdXm4AYSzEFIlQymoLFJ5S/fGDiBxBd53pacqS0JrL6X
TKKG1wLPiW9Vq/G90dL6N8qgA4vel9/UoE0aKEWHSEiGhhgcEh+foBoOs0F8DR9y
o/GZFVJfW5Jek6D7kWzMMq37dPS4TVJWN8df2Q2Ljy5f64i9sT/3rm+/dV6bmarB
1gjQtI+YoTeu+bZ1I9zJBWwTsMjyjhyZEk1zZxys89+qOnwaCTHF
=bA+b
-----END PGP SIGNATURE-----
Merge tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock test fixes from Mike Rapoport:
"Fix several compilation errors and warnings in memblock tests"
* tag 'fixes-2023-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: fix warning ‘struct seq_file’ declared inside parameter list
memblock tests: fix warning: "__ALIGN_KERNEL" redefined
memblock tests: Fix compilation errors.
A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks
-----BEGIN PGP SIGNATURE-----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=1MuW
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A large collection of fixes around this time.
All small and mostly trivial fixes.
- Lots of fixes for the new -Wformat-truncation warnings
- A fix in ALSA rawmidi core regression and UMP handling
- Series of Cirrus codec fixes
- ASoC Intel and Realtek codec fixes
- Usual HD- and USB-audio quirks and AMD ASoC quirks"
* tag 'sound-6.6-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (64 commits)
ALSA: hda/realtek - ALC287 Realtek I2S speaker platform support
ALSA: hda: cs35l56: Use the new RUNTIME_PM_OPS() macro
ALSA: usb-audio: scarlett_gen2: Fix another -Wformat-truncation warning
ALSA: rawmidi: Fix NULL dereference at proc read
ASoC: SOF: core: Only call sof_ops_free() on remove if the probe was successful
ASoC: SOF: Intel: MTL: Reduce the DSP init timeout
ASoC: cs42l43: Add shared IRQ flag for shutters
ASoC: imx-audmix: Fix return error with devm_clk_get()
ASoC: hdaudio.c: Add missing check for devm_kstrdup
ALSA: riptide: Fix -Wformat-truncation warning for longname string
ALSA: cs4231: Fix -Wformat-truncation warning for longname string
ALSA: ad1848: Fix -Wformat-truncation warning for longname string
ALSA: hda: generic: Check potential mixer name string truncation
ALSA: cmipci: Fix -Wformat-truncation warning
ALSA: firewire: Fix -Wformat-truncation warning for MIDI stream names
ALSA: firewire: Fix -Wformat-truncation warning for longname string
ALSA: xen: Fix -Wformat-truncation warning
ALSA: opti9x: Fix -Wformat-truncation warning
ALSA: es1688: Fix -Wformat-truncation warning
ALSA: cs4236: Fix -Wformat-truncation warning
...
Add hwprobe test for Zicboz and its block size. Also, when Zicboz is
present, test that cbo.zero may be issued and works. Additionally
provide a command line option that enables testing that the Zicbom
instructions cause SIGILL and also that cbo.zero causes SIGILL when
Zicboz it's not present. The SIGILL tests require "opt-in" with a
command line option because the RISC-V ISA does not require
unimplemented standard opcodes to issue illegal-instruction
exceptions (but hopefully most platforms do).
Pinning the test to a subset of cpus with taskset will also restrict
the hwprobe calls to that set.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Xiao Wang <xiao.w.wang@intel.com>
Link: https://lore.kernel.org/r/20230918131518.56803-14-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Returning (exiting with) negative exit codes isn't user friendly,
because the user must output the exit code with the shell, convert it
from its unsigned 8-bit value back to the negative value, and then
look up where that comes from in the code (which may be multiple
places). Use the kselftests TAP interface, instead.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20230918131518.56803-13-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Statically linking makes it more convenient to copy the test to a
minimal busybox environment.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230918131518.56803-12-ajones@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently the AIA ONE_REG registers are reported by get-reg-list
as new registers for various vcpu_reg_list configs whenever Ssaia
is available on the host because Ssaia extension can only be
disabled by Smstateen extension which is not always available.
To tackle this, we should filter-out AIA ONE_REG registers only
when Ssaia can't be disabled for a VCPU.
Fixes: 477069398e ("KVM: riscv: selftests: Add get-reg-list test")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Same set of ISA_EXT registers are not present on all host because
ISA_EXT registers are visible to the KVM user space based on the
ISA extensions available on the host. Also, disabling an ISA
extension using corresponding ISA_EXT register does not affect
the visibility of the ISA_EXT register itself.
Based on the above, we should filter-out all ISA_EXT registers.
Fixes: 477069398e ("KVM: riscv: selftests: Add get-reg-list test")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Introduce a new kselftest to detect devices that were declared in the
Devicetree, and are expected to be probed by a driver, but weren't.
The test uses two lists: a list of compatibles that can match a
Devicetree device to a driver, and a list of compatibles that should be
ignored. The first is automatically generated by the
dt-extract-compatibles script, and is run as part of building this test.
The list of compatibles to ignore is a hand-crafted list to capture the
few exceptions of compatibles that are expected to match a driver but
not be bound to it.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20230828211424.2964562-4-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Assert that vasprintf() succeeds as the "returned" string is undefined
on failure. Checking the result also eliminates the only warning with
default options in KVM selftests, i.e. is the only thing getting in the
way of compile with -Werror.
lib/test_util.c: In function ‘strdup_printf’:
lib/test_util.c:390:9: error: ignoring return value of ‘vasprintf’
declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
390 | vasprintf(&str, fmt, ap);
| ^~~~~~~~~~~~~~~~~~~~~~~~
Don't bother capturing the return value, allegedly vasprintf() can only
fail due to a memory allocation failure.
Fixes: dfaf20af76 ("KVM: arm64: selftests: Replace str_with_index with strdup_printf")
Cc: Andrew Jones <ajones@ventanamicro.com>
Cc: Haibo Xu <haibo1.xu@intel.com>
Cc: Anup Patel <anup@brainfault.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20230914010636.1391735-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When parsing the configs, keep track of card configurations that match
the current system but haven't matched any card, and report those as
test failures as they represent that a card which was expected to be
present on the system is missing. This allows the configuration files to
not only be used to detect missing PCM devices (which is currently
possible) but also that the soundcard hasn't been registered at all.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230919152702.100617-1-nfraprado@collabora.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
kselftests fails to build because the mm/testcases subdirectory is not
created and then the compiler fails to output the binary there.
So fix this by simply removing this subdirectory which is not very
useful.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20230915100113.13131-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
/proc/${pid}/smaps_rollup is not empty file even if process's address
space is empty, update the test.
Link: https://lkml.kernel.org/r/725e041f-e9df-4f3d-b267-d4cd2774a78d@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dynamically linking, Address Sanitizer requires its library to be the
first one to be loaded; this is apparently to ensure that every call to
malloc is intercepted. If using LD_PRELOAD, those listed libraries will
be loaded before the libraries listed in the program's ELF and will
therefore violate this requirement, leading to the below failure and
output from ASan.
commit 58e2847ad2 ("selftests: line buffer test program's stdout")
modified the kselftest runner to force line buffering by forcing the test
programs to run through `stdbuf`. It turns out that stdbuf implements
line buffering by injecting a library via LD_PRELOAD. Therefore selftests
that use ASan started failing.
Fix this by statically linking libasan in the affected test programs,
using the `-static-libasan` option. Note this is already the default for
Clang, but not got GCC.
Test output sample for failing case:
TAP version 13
1..3
# timeout set to 300
# selftests: openat2: openat2_test
# ==4052==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 1 selftests: openat2: openat2_test # exit=1
# timeout set to 300
# selftests: openat2: resolve_test
# ==4070==ASan runtime does not come first in initial library list;
you should either link runtime to your application or manually preload
it with LD_PRELOAD.
not ok 2 selftests: openat2: resolve_test # exit=1
Link: https://lkml.kernel.org/r/20230912135048.1755771-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Fixes: 58e2847ad2 ("selftests: line buffer test program's stdout")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202309121342.97e2f008-oliver.sang@intel.com
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Rix <trix@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test bpf_tcp_ca (in test_progs) checks multiple tcp_congestion_ops.
However, there isn't a test that verifies functions in the
tcp_congestion_ops is actually called. Add a check to verify that
bpf_cubic_acked is actually called during the test.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20230919060258.3237176-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei reported seeing log messages for some test cases even though we
just wanted to match the error string from the verifier. Move the
printing of the log buffer to a guarded condition so that we only print
it when we fail to match on the expected string in the log buffer,
preventing unneeded output when running the test.
Reported-by: Alexei Starovoitov <ast@kernel.org>
Fixes: d2a93715bf ("selftests/bpf: Add tests for BPF exceptions")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230918155233.297024-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch extends the test_cpuset_prs.sh test script to support testing
the new remote partition type and the new "cpuset.cpus.exclusive" and
"cpuset.cpus.exclusive.effective" control files by adding new tests
for them. In addition, the following changes are also made:
1) Run the state transition tests directly under root to ease testing
of remote partition and remove the unneeded test column.
2) Add a column to for the list of expected isolated CPUs and compare
it with the actual value by looking at the state of
/sys/kernel/debug/sched/domains which will be available if the
verbose flag is set.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix to unmount tracefs if the self-test mounted it to allow testing.
If tracefs was already mounted, this does nothing.
Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/
Fixes: a06023a8f7 ("selftests/user_events: Fix failures when user_events is not installed")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
'Pause' prompts the user to press Enter to continue running tests
once one test has finished. Pause on fail on prompts the user to press
enter only when a test fails.
Modifications to kci_test_addrlft() and kci_test_ipsec_offload()
ensure that whenever end_test is called, [$ret -ne 0] indicates
failure. This allows end_test to really easily implement pause on fail
functionality.
Signed-off-by: Daniel Mendes <dmendes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Uses a run_cmd helper function similar to other selftests to add
verbose functionality i.e. print executed commands and their outputs
Many commands silence or redirect output. This can be removed since
the verbose helper function captures output anyway and only outputs it
if VERBOSE is true. Similarly, the helper command for pipes to grep
searches stderr and stdout. This makes output redirection unnecessary
in those cases.
Signed-off-by: Daniel Mendes <dmendes@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The testsuite already has simply tests for HSRv0. The testuite would
have been able to notice the v1 breakage if it was there at the time.
Extend the testsuite to also cover HSRv1.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the code and group into functions so it will be easier to extend
the test to HSRv1 so that both versions are covered.
Move the ping/test part into do_complete_ping_test() and the interface
setup into setup_hsr_interfaces().
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The timeout in the while loop is never subtracted due wrong usage of
`let' leading to an endless loop if the former condition never gets
true.
Put the statement for let in quotes so it is parsed as a single
statement.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test was a bit complicated to read.
Added variables to keep track of the bytes read and to be read
in each step. Also some comments.
The test is unchanged.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a very common pattern used in vsock_test that we can
now replace with the new send_buf().
This allows us to reuse the code we already had to check the
actual return value and wait for all the bytes to be sent with
an appropriate timeout.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the code of send_byte() out in a new utility function that
can be used to send a generic buffer.
This new function can be used when we need to send a custom
buffer and not just a single 'A' byte.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We have a very common pattern used in vsock_test that we can
now replace with the new recv_buf().
This allows us to reuse the code we already had to check the
actual return value and wait for all bytes to be received with
an appropriate timeout.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the code of recv_byte() out in a new utility function that
can be used to receive a generic buffer.
This new function can be used when we need to receive a custom
buffer and not just a single 'A' byte.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 9 day(s) which contain
a total of 79 files changed, 5275 insertions(+), 600 deletions(-).
The main changes are:
1) Basic BTF validation in libbpf, from Andrii Nakryiko.
2) bpf_assert(), bpf_throw(), exceptions in bpf progs, from Kumar Kartikeya Dwivedi.
3) next_thread cleanups, from Oleg Nesterov.
4) Add mcpu=v4 support to arm32, from Puranjay Mohan.
5) Add support for __percpu pointers in bpf progs, from Yonghong Song.
6) Fix bpf tailcall interaction with bpf trampoline, from Leon Hwang.
7) Raise irq_work in bpf_mem_alloc while irqs are disabled to improve refill probabablity, from Hou Tao.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Andrey Konovalov, Dave Marchevsky, "Eric W. Biederman",
Jiri Olsa, Maciej Fijalkowski, Quentin Monnet, Russell King (Oracle),
Song Liu, Stanislav Fomichev, Yonghong Song
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add selftests to cover success and failure cases of API usage, runtime
behavior and invariants that need to be maintained for implementation
correctness.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-18-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add macros implementing an 'assert' statement primitive using macros,
built on top of the BPF exceptions support introduced in previous
patches.
The bpf_assert_*_with variants allow supplying a value which can the be
inspected within the exception handler to signify the assert statement
that led to the program being terminated abruptly, or be returned by the
default exception handler.
Note that only 64-bit scalar values are supported with these assertion
macros, as during testing I found other cases quite unreliable in
presence of compiler shifts/manipulations extracting the value of the
right width from registers scrubbing the verifier's bounds information
and knowledge about the value in the register.
Thus, it is easier to reliably support this feature with only the full
register width, and support both signed and unsigned variants.
The bpf_assert_range is interesting in particular, which clamps the
value in the [begin, end] (both inclusive) range within verifier state,
and emits a check for the same at runtime.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-17-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
By default, the subprog generated by the verifier to handle a thrown
exception hardcodes a return value of 0. To allow user-defined logic
and modification of the return value when an exception is thrown,
introduce the 'exception_callback:' declaration tag, which marks a
callback as the default exception handler for the program.
The format of the declaration tag is 'exception_callback:<value>', where
<value> is the name of the exception callback. Each main program can be
tagged using this BTF declaratiion tag to associate it with an exception
callback. In case the tag is absent, the default callback is used.
As such, the exception callback cannot be modified at runtime, only set
during verification.
Allowing modification of the callback for the current program execution
at runtime leads to issues when the programs begin to nest, as any
per-CPU state maintaing this information will have to be saved and
restored. We don't want it to stay in bpf_prog_aux as this takes a
global effect for all programs. An alternative solution is spilling
the callback pointer at a known location on the program stack on entry,
and then passing this location to bpf_throw as a parameter.
However, since exceptions are geared more towards a use case where they
are ideally never invoked, optimizing for this use case and adding to
the complexity has diminishing returns.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-7-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch implements BPF exceptions, and introduces a bpf_throw kfunc
to allow programs to throw exceptions during their execution at runtime.
A bpf_throw invocation is treated as an immediate termination of the
program, returning back to its caller within the kernel, unwinding all
stack frames.
This allows the program to simplify its implementation, by testing for
runtime conditions which the verifier has no visibility into, and assert
that they are true. In case they are not, the program can simply throw
an exception from the other branch.
BPF exceptions are explicitly *NOT* an unlikely slowpath error handling
primitive, and this objective has guided design choices of the
implementation of the them within the kernel (with the bulk of the cost
for unwinding the stack offloaded to the bpf_throw kfunc).
The implementation of this mechanism requires use of add_hidden_subprog
mechanism introduced in the previous patch, which generates a couple of
instructions to move R1 to R0 and exit. The JIT then rewrites the
prologue of this subprog to take the stack pointer and frame pointer as
inputs and reset the stack frame, popping all callee-saved registers
saved by the main subprog. The bpf_throw function then walks the stack
at runtime, and invokes this exception subprog with the stack and frame
pointers as parameters.
Reviewers must take note that currently the main program is made to save
all callee-saved registers on x86_64 during entry into the program. This
is because we must do an equivalent of a lightweight context switch when
unwinding the stack, therefore we need the callee-saved registers of the
caller of the BPF program to be able to return with a sane state.
Note that we have to additionally handle r12, even though it is not used
by the program, because when throwing the exception the program makes an
entry into the kernel which could clobber r12 after saving it on the
stack. To be able to preserve the value we received on program entry, we
push r12 and restore it from the generated subprogram when unwinding the
stack.
For now, bpf_throw invocation fails when lingering resources or locks
exist in that path of the program. In a future followup, bpf_throw will
be extended to perform frame-by-frame unwinding to release lingering
resources for each stack frame, removing this limitation.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230912233214.1518551-5-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This kselftest fixes update for Linux 6.6-rc2 consists of important
fixes to user_events test and ftrace test.
user_events test has been enabled for default run in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- adds checks for dependencies and skips the test. user_events test
requires root access, and tracefs and user_events enabled. It leaves
tracefs mounted and a fix is in progress for that missing piece.
- creates user_events test-specific Kconfig fragments.
ftrace test fixes:
- unmounts tracefs for recovering environment. Fix identified during the
above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage.
-----BEGIN PGP SIGNATURE-----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=HdKU
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull more kselftest fixes from Shuah Khan
"Fixes to user_events test and ftrace test.
The user_events test was enabled by default in Linux 6.6-rc1. The
following fixes are for bugs found since then:
- add checks for dependencies and skip the test if they aren't met.
The user_events test requires root access, and tracefs and
user_events enabled. It leaves tracefs mounted and a fix is in
progress for that missing piece.
- create user_events test-specific Kconfig fragments
ftrace test fixes:
- unmount tracefs for recovering environment. Fix identified during
the above mentioned user_events dependencies fix.
- adds softlink to latest log directory improving usage"
* tag 'linux-kselftest-fixes-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Fix to unmount tracefs for recovering environment
selftests: user_events: create test-specific Kconfig fragments
ftrace/selftests: Add softlink to latest log directory
selftests/user_events: Fix failures when user_events is not installed
-----BEGIN PGP SIGNATURE-----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=TgRd
-----END PGP SIGNATURE-----
Merge tag 'nf-23-09-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
netfilter pull request 23-09-13
====================
The following patchset contains Netfilter fixes for net:
1) Do not permit to remove rules from chain binding, otherwise
double rule release is possible, triggering UaF. This rule
deletion support does not make sense and userspace does not use
this. Problem exists since the introduction of chain binding support.
2) rbtree GC worker only collects the elements that have expired.
This operation is not destructive, therefore, turn write into
read spinlock to avoid datapath contention due to GC worker run.
This was not fixed in the recent GC fix batch in the 6.5 cycle.
3) pipapo set backend performs sync GC, therefore, catchall elements
must use sync GC queue variant. This bug was introduced in the
6.5 cycle with the recent GC fixes.
4) Stop GC run if memory allocation fails in pipapo set backend,
otherwise access to NULL pointer to GC transaction object might
occur. This bug was introduced in the 6.5 cycle with the recent
GC fixes.
5) rhash GC run uses an iterator that might hit EAGAIN to rewind,
triggering double-collection of the same element. This bug was
introduced in the 6.5 cycle with the recent GC fixes.
6) Do not permit to remove elements in anonymous sets, this type of
sets are populated once and then bound to rules. This fix is
similar to the chain binding patch coming first in this batch.
API permits since the very beginning but it has no use case from
userspace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
tls.sendmsg_large and tls.sendmsg_multiple are trying to send through
the self->cfd socket (only configured with TLS_RX) and to receive through
the self->fd socket (only configured with TLS_TX), so they're not using
kTLS at all. Swap the sockets.
Fixes: 7f657d5bf5 ("selftests: tls: add selftests for TLS sockets")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some SoCs have in built firmware support to classify current running
workload and pass to OS for making power management decisions.
This test program waits for notification of workload type change
and prints. This program can be used to test this feature and also
allows other user space programs to use as a reference.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This test relies on bpf_testmod, so skip it if the module is not available.
Fixes: aa3d65de4b ("bpf/selftests: Test fentry attachment to shadowed functions")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230914124928.340701-1-asavkov@redhat.com
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=vSvh
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Quite unusually, this does not contains any fix coming from subtrees
(nf, ebpf, wifi, etc).
Current release - regressions:
- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()
Previous releases - regressions:
- ipv4: fix one memleak in __inet_del_ifa()
- tcp: fix bind() regressions for v4-mapped-v6 addresses.
- tls: do not free tls_rec on async operation in
bpf_exec_tx_verdict()
- dsa: fixes for SJA1105 FDB regressions
- veth: update XDP feature set when bringing up device
- igb: fix hangup when enabling SR-IOV
Previous releases - always broken:
- kcm: fix memory leak in error path of kcm_sendmsg()
- smc: fix data corruption in smcr_port_add
- microchip: fix possible memory leak for vcap_dup_rule()"
* tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
net: renesas: rswitch: Add spin lock protection for irq {un}mask
net: renesas: rswitch: Fix unmasking irq condition
igb: clean up in all error paths when enabling SR-IOV
ixgbe: fix timestamp configuration code
selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.
selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.
selftest: tcp: Fix address length in bind_wildcard.c.
tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.
tcp: Fix bind() regression for v4-mapped-v6 wildcard address.
tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any).
ipv6: fix ip6_sock_set_addr_preferences() typo
veth: Update XDP feature set when bringing up device
net: macb: fix sleep inside spinlock
net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988
net: ethernet: mtk_eth_soc: fix uninitialized variable
kcm: Fix memory leak in error path of kcm_sendmsg()
r8152: check budget for r8152_poll()
net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset
...
Add the -h option to display all available command line options
available for test_xsk.sh and xskxceiver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In a number of places at en error, exit_with_error() is called that
terminates the whole test suite. This is not always desirable as it
would be more logical to only fail that test and then go along with
the other ones. So change this in a number of places in which I
thought it would be more logical to just fail the test in
question. Examples of this are in code that is only used by a single
test.
Also delete a pointless if-statement in receive_pkts() that has an
exit_with_error() in it. It can never occur since the return value is
an unsigned and the test is for less than zero.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use ksft_print_msg() instead of printf() and fprintf() in all places
as the ksefltests framework is being used. There is only one exception
and that is for the list-of-tests print out option, since no tests are
run in that case.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a command line option to be able to run a single test. This option
(-t) takes a number from the list of tests available with the "-l"
option. Here are two examples:
Run test number 2, the "receive single packet" test in all available modes:
./test_xsk.sh -t 2
Run test number 21, the metadata copy test in skb mode only
./test_xsh.sh -t 21 -m skb
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a command line option (-l) that lists all the tests. The number
before the test will be used in the next commit for specifying a
single test to run. Here is an example of the output:
Tests:
0: SEND_RECEIVE
1: SEND_RECEIVE_2K_FRAME
2: SEND_RECEIVE_SINGLE_PKT
3: POLL_RX
4: POLL_TX
5: POLL_RXQ_FULL
6: POLL_TXQ_FULL
7: SEND_RECEIVE_UNALIGNED
:
:
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Declare the test names statically in a struct so that we can refer to
them when adding the support to execute a single test in the next
commit. Before this patch, the names of them were not declared in a
single place which made it not possible to refer to them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prepare for the capability to be able to run a single test by moving
all the tests to their own functions. This function can then be called
to execute that test in the next commit.
Also, the tests named RUN_TO_COMPLETION_* were not named well, so
change them to SEND_RECEIVE_* as it is just a basic send and receive
test of 4K packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add an option -m on the command line that allows the user to run the
tests in a single mode instead of all of them. Valid modes are skb,
drv, and zc (zero-copy). An example:
To run test suite in drv mode only:
./test_xsk.sh -m drv
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a timeout for the transmission thread. If packets are not
completed properly, for some reason, the test harness would previously
get stuck forever in a while loop. But with this patch, this timeout
will trigger, flag the test as a failure, and continue with the next
test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Print info about every packet in verbose mode, both for Tx and
Rx. This is useful to have when a test fails or to validate that a
test is really doing what it was designed to do. Info on what is
supposed to be received and sent is also printed for the custom packet
streams since they differ from the base line. Here is an example:
Tx addr: 37e0 len: 64 options: 0 pkt_nb: 8
Tx addr: 4000 len: 64 options: 0 pkt_nb: 9
Rx: addr: 100 len: 64 options: 0 pkt_nb: 0 valid: 1
Rx: addr: 1100 len: 64 options: 0 pkt_nb: 1 valid: 1
Rx: addr: 2100 len: 64 options: 0 pkt_nb: 4 valid: 1
Rx: addr: 3100 len: 64 options: 0 pkt_nb: 8 valid: 1
Rx: addr: 4100 len: 64 options: 0 pkt_nb: 9 valid: 1
One pointless verbose print statement is also deleted and another one
is made clearer.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-2-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Building memblock tests produces the following warning:
cc -I. -I../../include -Wall -O2 -fsanitize=address -fsanitize=undefined -D CONFIG_PHYS_ADDR_T_64BIT -c -o main.o main.c
In file included from tests/common.h:9,
from tests/basic_api.h:5,
from main.c:2:
./linux/memblock.h:601:50: warning: ‘struct seq_file’ declared inside parameter list will not be visible outside of this definition or declaration
601 | static inline void memtest_report_meminfo(struct seq_file *m) { }
| ^~~~~~~~
Add declaration of 'struct seq_file' to tools/include/linux/seq_file.h
to fix it.
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
This adds two tests for 'shutdown()' call. It checks that SIGPIPE is
sent when MSG_NOSIGNAL is not set and vice versa. Both flags SHUT_WR
and SHUT_RD are tested.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch fix the follow errors.
commit 61167ad5fe ("mm: pass nid to reserve_bootmem_region()") pass nid
parameter to reserve_bootmem_region(),
$ make -C tools/testing/memblock/
...
memblock.c: In function ‘memmap_init_reserved_pages’:
memblock.c:2111:25: error: too many arguments to function ‘reserve_bootmem_region’
2111 | reserve_bootmem_region(start, end, nid);
| ^~~~~~~~~~~~~~~~~~~~~~
../../include/linux/mm.h:32:6: note: declared here
32 | void reserve_bootmem_region(phys_addr_t start, phys_addr_t end);
| ^~~~~~~~~~~~~~~~~~~~~~
memblock.c:2122:17: error: too many arguments to function ‘reserve_bootmem_region’
2122 | reserve_bootmem_region(start, end, nid);
| ^~~~~~~~~~~~~~~~~~~~~~
commit dcdfdd40fa ("mm: Add support for unaccepted memory") call
accept_memory() in memblock.c
$ make -C tools/testing/memblock/
...
cc -fsanitize=address -fsanitize=undefined main.o memblock.o \
lib/slab.o mmzone.o slab.o tests/alloc_nid_api.o \
tests/alloc_helpers_api.o tests/alloc_api.o tests/basic_api.o \
tests/common.o tests/alloc_exact_nid_api.o -o main
/usr/bin/ld: memblock.o: in function `memblock_alloc_range_nid':
memblock.c:(.text+0x7ae4): undefined reference to `accept_memory'
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Fixes: dcdfdd40fa ("mm: Add support for unaccepted memory")
Fixes: 61167ad5fe ("mm: pass nid to reserve_bootmem_region()")
Link: https://lore.kernel.org/r/tencent_6F19BC082167F15DF2A8D8BEFE8EF220F60A@qq.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Compare NETFILTER_CFG type audit logs emitted from kernel upon ruleset
modifications against expected output.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We need to deny the attach_override test for arm64, denying the
whole kprobe_multi_test suite. Also making attach_override static.
Fixes: 7182e56411 ("selftests/bpf: Add kprobe_multi override test")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230913114711.499829-1-jolsa@kernel.org
- Add missing LOCKDOWN checks for eventfs callers
When LOCKDOWN is active for tracing, it causes inconsistent state
when some functions succeed and others fail.
- Use dput() to free the top level eventfs descriptor
There was a race between accesses and freeing it.
- Fix a long standing bug that eventfs exposed due to changing timings
by dynamically creating files. That is, If a event file is opened
for an instance, there's nothing preventing the instance from being
removed which will make accessing the files cause use-after-free bugs.
- Fix a ring buffer race that happens when iterating over the ring
buffer while writers are active. Check to make sure not to read
the event meta data if it's beyond the end of the ring buffer sub buffer.
- Fix the print trigger that disappeared because the test to create it
was looking for the event dir field being filled, but now it has the
"ef" field filled for the eventfs structure.
- Remove the unused "dir" field from the event structure.
- Fix the order of the trace_dynamic_info as it had it backwards for the
offset and len fields for which one was for which endianess.
- Fix NULL pointer dereference with eventfs_remove_rec()
If an allocation fails in one of the eventfs_add_*() functions,
the caller of it in event_subsystem_dir() or event_create_dir()
assigns the result to the structure. But it's assigning the ERR_PTR
and not NULL. This was passed to eventfs_remove_rec() which expects
either a good pointer or a NULL, not ERR_PTR. The fix is to not
assign the ERR_PTR to the structure, but to keep it NULL on error.
- Fix list_for_each_rcu() to use list_for_each_srcu() in
dcache_dir_open_wrapper(). One iteration of the code used RCU
but because it had to call sleepable code, it had to be changed
to use SRCU, but one of the iterations was missed.
- Fix synthetic event print function to use "as_u64" instead of
passing in a pointer to the union. To fix big/little endian issues,
the u64 that represented several types was turned into a union to
define the types properly.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZQCvoBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtgrAP9MiYiCMU+90oJ+61DFchbs3y7BNidP
s3lLRDUMJ935NQD/SSAm54PqWb+YXMpD7m9+3781l6xqwfabBMXNaEl+FwA=
=tlZu
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Add missing LOCKDOWN checks for eventfs callers
When LOCKDOWN is active for tracing, it causes inconsistent state
when some functions succeed and others fail.
- Use dput() to free the top level eventfs descriptor
There was a race between accesses and freeing it.
- Fix a long standing bug that eventfs exposed due to changing timings
by dynamically creating files. That is, If a event file is opened for
an instance, there's nothing preventing the instance from being
removed which will make accessing the files cause use-after-free
bugs.
- Fix a ring buffer race that happens when iterating over the ring
buffer while writers are active. Check to make sure not to read the
event meta data if it's beyond the end of the ring buffer sub buffer.
- Fix the print trigger that disappeared because the test to create it
was looking for the event dir field being filled, but now it has the
"ef" field filled for the eventfs structure.
- Remove the unused "dir" field from the event structure.
- Fix the order of the trace_dynamic_info as it had it backwards for
the offset and len fields for which one was for which endianess.
- Fix NULL pointer dereference with eventfs_remove_rec()
If an allocation fails in one of the eventfs_add_*() functions, the
caller of it in event_subsystem_dir() or event_create_dir() assigns
the result to the structure. But it's assigning the ERR_PTR and not
NULL. This was passed to eventfs_remove_rec() which expects either a
good pointer or a NULL, not ERR_PTR. The fix is to not assign the
ERR_PTR to the structure, but to keep it NULL on error.
- Fix list_for_each_rcu() to use list_for_each_srcu() in
dcache_dir_open_wrapper(). One iteration of the code used RCU but
because it had to call sleepable code, it had to be changed to use
SRCU, but one of the iterations was missed.
- Fix synthetic event print function to use "as_u64" instead of passing
in a pointer to the union. To fix big/little endian issues, the u64
that represented several types was turned into a union to define the
types properly.
* tag 'trace-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Fix the NULL pointer dereference bug in eventfs_remove_rec()
tracefs/eventfs: Use list_for_each_srcu() in dcache_dir_open_wrapper()
tracing/synthetic: Print out u64 values properly
tracing/synthetic: Fix order of struct trace_dynamic_info
selftests/ftrace: Fix dependencies for some of the synthetic event tests
tracing: Remove unused trace_event_file dir field
tracing: Use the new eventfs descriptor for print trigger
ring-buffer: Do not attempt to read past "commit"
tracefs/eventfs: Free top level files on removal
ring-buffer: Avoid softlockup in ring_buffer_resize()
tracing: Have event inject files inc the trace array ref count
tracing: Have option files inc the trace array ref count
tracing: Have current_trace inc the trace array ref count
tracing: Have tracing_max_latency inc the trace array ref count
tracing: Increase trace array ref count on enable and filter files
tracefs/eventfs: Use dput to free the toplevel events directory
tracefs/eventfs: Add missing lockdown checks
tracefs: Add missing lockdown check to tracefs_create_dir()
As discussed in '3044b16e7c6f', cls_u32 was handling the use of classid
incorrectly. Add a test to check if it's conforming to the correct
behaviour.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in 'b80b829e9e2c', cls_route was handling the use of classid
incorrectly. Add a test to check if it's conforming to the correct
behaviour.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As discussed in '76e42ae83199', cls_fw was handling the use of classid
incorrectly. Add a few tests to check if it's conforming to the correct
behaviour.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We add these 8 test cases in bind_wildcard.c to check bind() conflicts.
1st bind() 2nd bind()
--------- ---------
0.0.0.0 ::FFFF:0.0.0.0
::FFFF:0.0.0.0 0.0.0.0
0.0.0.0 ::FFFF:127.0.0.1
::FFFF:127.0.0.1 0.0.0.0
127.0.0.1 ::FFFF:0.0.0.0
::FFFF:0.0.0.0 127.0.0.1
127.0.0.1 ::FFFF:127.0.0.1
::FFFF:127.0.0.1 127.0.0.1
All test passed without bhash2 and with bhash2 and this series.
Before bhash2:
$ uname -r
6.0.0-rc1-00393-g0bf73255d3a3
$ ./bind_wildcard
...
# PASSED: 16 / 16 tests passed.
Just after bhash2:
$ uname -r
6.0.0-rc1-00394-g28044fc1d495
$ ./bind_wildcard
...
ok 15 bind_wildcard.v4_local_v6_v4mapped_local.v4_v6
not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4
# FAILED: 15 / 16 tests passed.
On net.git:
$ ./bind_wildcard
...
not ok 14 bind_wildcard.v4_local_v6_v4mapped_any.v6_v4
not ok 16 bind_wildcard.v4_local_v6_v4mapped_local.v6_v4
# FAILED: 13 / 16 tests passed.
With this series:
$ ./bind_wildcard
...
# PASSED: 16 / 16 tests passed.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a preparation patch for the following patch.
Let's define expected_errno in each test case so that we can add other test
cases easily.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The selftest passes the IPv6 address length for an IPv4 address.
We should pass the correct length.
Note inet_bind_sk() does not check if the size is larger than
sizeof(struct sockaddr_in), so there is no real bug in this
selftest.
Fixes: 13715acf8a ("selftest: Add test for bind() conflicts.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 1d56ade032 changed the function get_unpriv_disabled() to
return its results as a bool instead of updating a global variable, but
test_verifier was not updated to keep in line with these changes. Thus
unpriv_disabled is always false in test_verifier and unprivileged tests
are not properly skipped on systems with unprivileged bpf disabled.
Fixes: 1d56ade032 ("selftests/bpf: Unprivileged tests for test_loader.c")
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20230912120631.213139-1-asavkov@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add 4 test cases to confirm the tailcall infinite loop bug has been fixed.
Like tailcall_bpf2bpf cases, do fentry/fexit on the bpf2bpf, and then
check the final count result.
tools/testing/selftests/bpf/test_progs -t tailcalls
226/13 tailcalls/tailcall_bpf2bpf_fentry:OK
226/14 tailcalls/tailcall_bpf2bpf_fexit:OK
226/15 tailcalls/tailcall_bpf2bpf_fentry_fexit:OK
226/16 tailcalls/tailcall_bpf2bpf_fentry_entry:OK
226 tailcalls:OK
Summary: 1/16 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20230912150442.2009-4-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This kselftest fixes update for Linux 6.6-rc2 consists of fixes
-- kselftest runner script to propagate SIGTERM to runner child
to avoid kselftest hang.
-- to install symlinks required for test execution to avoid test
failures.
-- kselftest dependency checker script argument parsing.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmT/StAACgkQCwJExA0N
QxxeZRAA1wBztlE9JF9cBcjXICXXlCBIGL3tfPMJJrkv5KezZPegzdOwXQfEfHyp
2bDtzpamrnDUNtV5xbCu+NVWhlLvyNHb9Irr/wcOLLopsLxtvnodVyrPbOs2Spsd
dV6szfMEP7+sbjlSjPD/96OPRLNRcPEFiVr/bjjzMbpAO0AjDjjONKSeN6zce4K/
7hsh4EZjb7mUnKLDi+ZF2+HTKEBiyejpOC2zvEoL5nba7voVxy/bNYarbpAMas7u
XkYSrxPMQM5moA6MYs+As0IVwlEDk+4XGgYN9Z5eTgai5nz1q/8mNxGvlK2pATI+
vWo1yRAdzDLuBSpesXjocAZWMxR3BD7BhbF3IAWKVkotbwiB0zZGy0umta9qF/e8
izT298QA9YiVz+Um/sCirpZGdegtaMKUcFN+AyGbIPzd/xmDLWoUlIy1qlg3dPW1
ZtiEMgNqqvJgi3bh/kjLUPUoMdswkM3Zuhyn9sBq+Z215XoyJqVt2vW0NrlTuTf8
3dunqIDxcyhaGvnCDBDvH80TArg91eERtRrWe9aISYH5Y4IZl7kXRtFlCGi8c48M
hP0kYpenbo/rnU8GoR+Yuo2aNma7YBYg3ZJwGJAE55ZgG4euNYXWv4NsVYyzDRTF
dtwl5GCggYGtCRDQXNEmxAIuEZgCH4PIAt742CgkrVxEI+lrWlQ=
=8/pm
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- kselftest runner script to propagate SIGTERM to runner child
to avoid kselftest hang
- install symlinks required for test execution to avoid test
failures
- kselftest dependency checker script argument parsing
* tag 'linux-kselftest-next-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: Keep symlinks, when possible
selftests: fix dependency checker script
kselftest/runner.sh: Propagate SIGTERM to runner child
selftests/ftrace: Correctly enable event in instance-event.tc
Fix to unmount the tracefs if the ftracetest mounted it for recovering
system environment. If the tracefs is already mounted, this does nothing.
Suggested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/all/29fce076-746c-4650-8358-b4e0fa215cf7@sirena.org.uk/
Fixes: cbd965bde7 ("ftrace/selftests: Return the skip code when tracing directory not configured in kernel")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Create the config file in user_events directory of testcase which
need more kernel configuration than the default defconfig. User
could use these configs with merge_config.sh script:
The Kconfig CONFIG_USER_EVENTS=y is needed for the test to read
data from the following files,
- "/sys/kernel/tracing/user_events_data"
- "/sys/kernel/tracing/user_events_status"
- "/sys/kernel/tracing/events/user_events/*"
Enable config for specific testcase:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/user_events/config
Enable configs for all testcases:
(export ARCH=xxx #for cross compiling)
./scripts/kconfig/merge_config.sh .config \
tools/testing/selftests/*/config
Cc: Beau Belgrave <beaub@linux.microsoft.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When I'm debugging something with the ftrace selftests and need to look at
the logs, it becomes tedious that I need to do the following:
ls -ltr logs
[ copy the last directory ]
ls logs/<paste-last-dir>
to see where the logs are.
Instead, do the common practice of having a "latest" softlink to the last
run selftest. This way after running the selftest I only need to do:
ls logs/latest/
and it will always give me the directory of the last run selftest logs!
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When user_events is not installed the self tests currently fail. Now
that these self tests run by default we need to ensure they don't fail
when user_events was not enabled for the kernel being tested.
Add common methods to detect if tracefs and user_events is enabled. If
either is not enabled skip the test. If tracefs is enabled, but is not
mounted, mount tracefs and fail if there were any errors. Fail if not
run as root.
Fixes: 68b4d2d583 ("selftests/user_events: Reenable build")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Link: https://lore.kernel.org/all/CA+G9fYuugZ0OMeS6HvpSS4nuf_A3s455ecipGBvER0LJHojKZg@mail.gmail.com/
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") started propagating proper NET_XMIT_DROP error to the caller
which means it's now possible to get positive error code when calling
bpf_clone_redirect() in this particular test. Update the test to reflect
that.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-2-sdf@google.com
Add a test to test all possible and valid allocation size for bpf
memory allocator. For each possible allocation size, the test uses
the following two steps to test the alloc and free path:
1) allocate N (N > high_watermark) objects to trigger the refill
executed in irq_work.
2) free N objects to trigger the freeing executed in irq_work.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230908133923.2675053-5-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Starting with v197, systemd uses predictable interface network names,
the traditional interface naming scheme (eth0) is deprecated, therefore
it cannot be assumed that the eth0 interface exists on the host.
This modification makes the bind_bhash test program run in a separate
network namespace and no longer needs to consider the name of the
network interface on the host.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAmT7XLYACgkQDpNsjXcp
gj6qrAf+LiAs3dUELOjrqaQQbbNGp4na+YwJCiezuvwZn8P+ieJpt6QCEDHEb1jH
LCOjr0GFMhHnAWp9Q0Qay4IXoKk8DPkA/avSaZgsl5blmMyNqFMgHklU7mjRvhCG
ayb/NeZYwrJhA9NyueXYuH3h7QDryxyIN3TZS1/7z13YrohMIQeu3q7X/ZBMh7NS
uPd7vmDj8TnZ/agQzplQ4XDov9lrzkUXDJqpMvn/Gbr4K7y66UZa3SLxi1JPrnah
ffDvBlK2OImNBoaADfiRImWc7QlXVkF/B08xUcJ6tXAeO6xJDykkie+gjsF2S040
YP2YIG+IWi47zqa25EuxFRtavwUh6w==
=4GKy
-----END PGP SIGNATURE-----
Merge tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray
Pull xarray fixes from Matthew Wilcox:
- Fix a bug encountered by people using bittorrent where they'd get
NULL pointer dereferences on page cache lookups when using XFS
- Two documentation fixes
* tag 'xarray-6.6' of git://git.infradead.org/users/willy/xarray:
idr: fix param name in idr_alloc_cyclic() doc
xarray: Document necessary flag in alloc functions
XArray: Do not return sibling entries from xa_load()
Commit b81a3a100c ("tracing/histogram: Add simple tests for
stacktrace usage of synthetic events") changed the output text in
tracefs README, but missed updating some of the dependencies specified
in selftests. This causes some of the tests to exit as unsupported.
Fix this by changing the grep pattern. Since we want these tests to work
on older kernels, match only against the common last part of the
pattern.
Link: https://lore.kernel.org/linux-trace-kernel/20230614091046.2178539-1-naveen@kernel.org
Cc: <linux-kselftest@vger.kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Fixes: b81a3a100c ("tracing/histogram: Add simple tests for stacktrace usage of synthetic events")
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Adding test that tries to attach program with bpf_override_return
helper to function not within error injection list.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230907200652.926951-2-jolsa@kernel.org
Static ksyms often have problems because the number of symbols exceeds the
MAX_SYMS limit. Like changing the MAX_SYMS from 300000 to 400000 in
commit e76a014334a6("selftests/bpf: Bump and validate MAX_SYMS") solves
the problem somewhat, but it's not the perfect way.
This commit uses dynamic memory allocation, which completely solves the
problem caused by the limitation of the number of kallsyms. At the same
time, add APIs:
load_kallsyms_local()
ksym_search_local()
ksym_get_addr_local()
free_kallsyms_local()
There are used to solve the problem of selftests/bpf updating kallsyms
after attach new symbols during testmod testing.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/tencent_C9BDA68F9221F21BE4081566A55D66A9700A@qq.com
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZPi3lxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSW+4A/3VcBRAB8/1HTTUulwUMYhF2msyAN6p5TtKl
WGVASdC1AP9NbR2Dh9HwHZmVrlwRbVlqSh9Avi+d0VNQjJKPwvtHBw==
=nU3g
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"One test fix and a __counted_by annotation"
* tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix a resource leak
landlock: Annotate struct landlock_rule with __counted_by
When kselftest is built/installed with the 'gen_tar' target, rsync is
used for the installation step to copy files. Extra care is needed for
tests that have symlinks. Commit ae108c48b5 ("selftests: net: Fix
cross-tree inclusion of scripts") added '-L' (transform symlink into
referent file/dir) to rsync, to fix dangling links. However, that
broke some tests where the symlink (being a symlink) is part of the
test (e.g. exec:execveat).
Use rsync's '--copy-unsafe-links' that does right thing.
Fixes: ae108c48b5 ("selftests: net: Fix cross-tree inclusion of scripts")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This patch fixes inconsistencies in the parsing rules of the levels 1
and 2 of the kselftest_deps.sh. It was added the levels 4 and 5 to
account for a few edge cases that are present in some tests, also some
minor identation styling have been fixed (s/ /\t/g).
Signed-off-by: Ricardo B. Marliere <rbmarliere@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Timeouts in kselftest are done using the "timeout" command with the
"--foreground" option. Without the "foreground" option, it is not
possible for a user to cancel the runner using SIGINT, because the
signal is not propagated to timeout which is running in a different
process group. The "forground" options places the timeout in the same
process group as its parent, but only sends the SIGTERM (on timeout)
signal to the forked process. Unfortunately, this does not play nice
with all kselftests, e.g. "net:fcnal-test.sh", where the child
processes will linger because timeout does not send SIGTERM to the
group.
Some users have noted these hangs [1].
Fix this by nesting the timeout with an additional timeout without the
foreground option.
Link: https://lore.kernel.org/all/7650b2eb-0aee-a2b0-2e64-c9bc63210f67@alu.unizg.hr/ # [1]
Fixes: 651e0d8814 ("kselftest/runner: allow to properly deliver signals to tests")
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The test case creates 4 threads and then pins these 4 threads in CPU 0.
These 4 threads will run different bpf program through
bpf_prog_test_run_opts() and these bpf program will use bpf_obj_new()
and bpf_obj_drop() to allocate and free local kptrs concurrently.
Under preemptible kernel, bpf_obj_new() and bpf_obj_drop() may preempt
each other, bpf_obj_new() may return NULL and the test will fail before
applying these fixes as shown below:
test_preempted_bpf_ma_op:PASS:open_and_load 0 nsec
test_preempted_bpf_ma_op:PASS:attach 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:no test prog 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:pthread_create 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:PASS:run prog err 0 nsec
test_preempted_bpf_ma_op:FAIL:ENOMEM unexpected ENOMEM: got TRUE
#168 preempted_bpf_ma_op:FAIL
Summary: 0/0 PASSED, 0 SKIPPED, 1 FAILED
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230901111954.1804721-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now 'BPF_MAP_TYPE_CGRP_STORAGE + local percpu ptr'
can cover all BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE functionality
and more. So mark BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE deprecated.
Also make changes in selftests/bpf/test_bpftool_synctypes.py
and selftest libbpf_str to fix otherwise test errors.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152837.2003563-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a few negative tests for common mistakes with using percpu kptr
including:
- store to percpu kptr.
- type mistach in bpf_kptr_xchg arguments.
- sleepable prog with untrusted arg for bpf_this_cpu_ptr().
- bpf_percpu_obj_new && bpf_obj_drop, and bpf_obj_new && bpf_percpu_obj_drop
- struct with ptr for bpf_percpu_obj_new
- struct with special field (e.g., bpf_spin_lock) for bpf_percpu_obj_new
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152832.2002421-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a non-sleepable cgrp_local_storage test with percpu kptr. The
test does allocation of percpu data, assigning values to percpu
data and retrieval of percpu data. The de-allocation of percpu
data is done when the map is freed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152827.2001784-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add non-sleepable and sleepable tests with percpu kptr. For
non-sleepable test, four programs are executed in the order of:
1. allocate percpu data.
2. assign values to percpu data.
3. retrieve percpu data.
4. de-allocate percpu data.
The sleepable prog tried to exercise all above 4 steps in a
single prog. Also for sleepable prog, rcu_read_lock is needed
to protect direct percpu ptr access (from map value) and
following bpf_this_cpu_ptr() and bpf_per_cpu_ptr() helpers.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152811.2000125-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The new macro bpf_percpu_obj_{new/drop}() is very similar to bpf_obj_{new,drop}()
as they both take a type as the argument.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152805.1999417-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some error messages are changed due to the addition of
percpu kptr support. Fix linked_list test with changed
error messages.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230827152754.1997769-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets
are hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmT6R6wACgkQMUZtbf5S
IrsmTg//TgmRjxSZ0lrPQtJwZR/eN3ZR2oQG3rwnssCx+YgHEGGxQsfT4KHEMacR
ZgGDZVTpthUJkkACBPi8ZMoy++RdjEmlCcanfeDkGHoYGtiX1lhkofhLMn1KUHbI
rIbP9EdNKxQT0SsBlw/U28pD5jKyqOgL23QobEwmcjLTdMpamb+qIsD6/xNv9tEj
Tu4BdCIkhjxnBD622hsE3pFTG7oSn2WM6rf5NT1E43mJ3W8RrMcydSB27J7Oryo9
l3nYMAhz0vQINS2WQ9eCT1/7GI6gg1nDtxFtrnV7ASvxayRBPIUr4kg1vT+Tixsz
CZMnwVamEBIYl9agmj7vSji7d5nOUgXPhtWhwWUM2tRoGdeGw3vSi1pgDvRiUCHE
PJ4UHv7goa2AgnOlOQCFtRybAu+9nmSGm7V+GkeGLnH7xbFsEa5smQ/+FSPJs8Dn
Yf4q5QAhdN8tdnofRlrN/nCssoDF3cfmBsTJ7wo5h71gW+BWhsP58eDCJlXd/r8k
+Qnvoe2kw27ktFR1tjsUDZ0AcSmeVARNwmXCOBYZsG4tEek8pLyj008mDvJvdfyn
PGPn7Eo5DyaERlHVmPuebHXSyniDEPe2GLTmlHcGiRpGspoUHbB+HRiDAuRLMB9g
pkL8RHpNfppnuUXeUoNy3rgEkYwlpTjZX0QHC6N8NQ76ccB6CNM=
=YpmE
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
Function instance_set() expects to enable event 'sched_switch', so we
should set 1 to its 'enable' file.
Testcase passed after this patch:
# ./ftracetest test.d/instances/instance-event.tc
=== Ftrace unit tests ===
[1] Test creation and deletion of trace instances while setting an event
[PASS]
# of passed: 1
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- kprobes: use struct_size() for variable size kretprobe_instance
data structure.
- eprobe: Simplify trace_eprobe list iteration.
- probe events: Data structure field access support on BTF argument.
. Update BTF argument support on the functions in the kernel loadable
modules (only loaded modules are supported).
. Move generic BTF access function (search function prototype and get
function parameters) to a separated file.
. Add a function to search a member of data structure in BTF.
. Support accessing BTF data structure member from probe args by
C-like arrow('->') and dot('.') operators. e.g.
't sched_switch next=next->pid vruntime=next->se.vruntime'
. Support accessing BTF data structure member from $retval. e.g.
'f getname_flags%return +0($retval->name):string'
. Add string type checking if BTF type info is available.
This will reject if user specify ":string" type for non "char
pointer" type.
. Automatically assume the fprobe event as a function return event
if $retval is used.
- selftests/ftrace: Add BTF data field access test cases.
- Documentation: Update fprobe event example with BTF data field.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmTycQkbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bqS8H/jeR1JhOzIXOvTw7XCFm
MrSY/SKi8tQfV6lau2UmoYdbYvYjpqL34XLOQPNf2/lrcL2M9aNYXk9fbhlW8enx
vkMyKQ0E5anixkF4vsTbEl9DaprxbpsPVACmZ/7VjQk2JuXIdyaNk8hno9LgIcEq
udztb0o2HmDFqAXfRi0LvlSTAIwvXZ+usmEvYpaq1g2WwrCe7NHEYl42vMpj+h4H
9l4t5rA9JyPPX4yQUjtKGW5eRVTwDTm/Gn6DRzYfYzkkiBZv27qfovzBOt672LgG
hyot+u7XeKvZx3jjnF7+mRWoH/m0dqyhyi/nPhpIE09VhgwclrbGAcDuR1x6sp01
PHY=
=hBDN
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- kprobes: use struct_size() for variable size kretprobe_instance data
structure.
- eprobe: Simplify trace_eprobe list iteration.
- probe events: Data structure field access support on BTF argument.
- Update BTF argument support on the functions in the kernel
loadable modules (only loaded modules are supported).
- Move generic BTF access function (search function prototype and
get function parameters) to a separated file.
- Add a function to search a member of data structure in BTF.
- Support accessing BTF data structure member from probe args by
C-like arrow('->') and dot('.') operators. e.g.
't sched_switch next=next->pid vruntime=next->se.vruntime'
- Support accessing BTF data structure member from $retval. e.g.
'f getname_flags%return +0($retval->name):string'
- Add string type checking if BTF type info is available. This will
reject if user specify ":string" type for non "char pointer"
type.
- Automatically assume the fprobe event as a function return event
if $retval is used.
- selftests/ftrace: Add BTF data field access test cases.
- Documentation: Update fprobe event example with BTF data field.
* tag 'probes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation: tracing: Update fprobe event example with BTF field
selftests/ftrace: Add BTF fields access testcases
tracing/fprobe-event: Assume fprobe is a return event by $retval
tracing/probes: Add string type check with BTF
tracing/probes: Support BTF field access from $retval
tracing/probes: Support BTF based data structure field access
tracing/probes: Add a function to search a member of a struct/union
tracing/probes: Move finding func-proto API and getting func-param API to trace_btf
tracing/probes: Support BTF argument on module functions
tracing/eprobe: Iterate trace_eprobe directly
kernel: kprobes: Use struct_size()
x86 self-test code.
[ Arguably the existing code was unnecessarily fragile, and
tooling should have picked up the new syscall number,
and a wider fix is being worked on - but meanwhile, let's
not have the old syscall number in the kernel tree. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=W86M
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 selftest fix from Ingo Molnar:
"Fix the __NR_map_shadow_stack syscall-renumbering fallout in the x86
self-test code.
[ Arguably the existing code was unnecessarily fragile, and tooling
should have picked up the new syscall number, and a wider fix is
being worked on - but meanwhile, let's not have the old syscall
number in the kernel tree. ]"
* tag 'x86-urgent-2023-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86: Update map_shadow_stack syscall nr
User visible changes:
- Added a way to easier filter with cpumasks:
# echo 'cpumask & CPUS{17-42}' > /sys/kernel/tracing/events/ipi_send_cpumask/filter
- Show actual size of ring buffer after modifying the ring buffer size via
buffer_size_kb. Currently it just returns what was written, but the actual
size rounds up to the sub buffer size. Show that real size instead.
Major changes:
- Added "eventfs". This is the code that handles the inodes and dentries of
tracefs/events directory. As there are thousands of events, and each event
has several inodes and dentries that currently exist even when tracing is
never used, they take up precious memory. Instead, eventfs will allocate
the inodes and dentries in a JIT way (similar to what procfs does). There
is now metadata that handles the events and subdirectories, and will create
the inodes and dentries when they are used.
Note, I also have patches that remove the subdirectory meta data, but will
wait till the next merge window before applying them. It's a little more
complex, and I want to make sure the dynamic code works properly before
adding more complexity, making it easier to revert if need be.
Minor changes:
- Optimization to user event list traversal.
- Remove intermediate permission of tracefs files (note the intermediate
permission removes all access to the files so it is not a security concern,
but just a clean up.)
- Add the complex fix to FORTIFY_SOURCE to the kernel stack event logic.
- Other minor clean ups.
-----BEGIN PGP SIGNATURE-----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=/s+e
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Added a way to easier filter with cpumasks:
# echo 'cpumask & CPUS{17-42}' > /sys/kernel/tracing/events/ipi_send_cpumask/filter
- Show actual size of ring buffer after modifying the ring buffer
size via buffer_size_kb.
Currently it just returns what was written, but the actual size
rounds up to the sub buffer size. Show that real size instead.
Major changes:
- Added "eventfs". This is the code that handles the inodes and
dentries of tracefs/events directory. As there are thousands of
events, and each event has several inodes and dentries that
currently exist even when tracing is never used, they take up
precious memory. Instead, eventfs will allocate the inodes and
dentries in a JIT way (similar to what procfs does). There is now
metadata that handles the events and subdirectories, and will
create the inodes and dentries when they are used.
Note, I also have patches that remove the subdirectory meta data,
but will wait till the next merge window before applying them. It's
a little more complex, and I want to make sure the dynamic code
works properly before adding more complexity, making it easier to
revert if need be.
Minor changes:
- Optimization to user event list traversal
- Remove intermediate permission of tracefs files (note the
intermediate permission removes all access to the files so it is
not a security concern, but just a clean up)
- Add the complex fix to FORTIFY_SOURCE to the kernel stack event
logic
- Other minor cleanups"
* tag 'trace-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
tracefs: Remove kerneldoc from struct eventfs_file
tracefs: Avoid changing i_mode to a temp value
tracing/user_events: Optimize safe list traversals
ftrace: Remove empty declaration ftrace_enable_daemon() and ftrace_disable_daemon()
tracing: Remove unused function declarations
tracing/filters: Document cpumask filtering
tracing/filters: Further optimise scalar vs cpumask comparison
tracing/filters: Optimise CPU vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise scalar vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise cpumask vs cpumask filtering when user mask is a single CPU
tracing/filters: Enable filtering the CPU common field by a cpumask
tracing/filters: Enable filtering a scalar field by a cpumask
tracing/filters: Enable filtering a cpumask field by another cpumask
tracing/filters: Dynamically allocate filter_pred.regex
test: ftrace: Fix kprobe test for eventfs
eventfs: Move tracing/events to eventfs
eventfs: Implement removal of meta data from eventfs
eventfs: Implement functions to create files and dirs when accessed
eventfs: Implement eventfs lookup, read, open functions
eventfs: Implement eventfs file add functions
...
* Per-cpu cpu usage stats are now tracked. This currently isn't printed out
in the cgroupfs interface and can only be accessed through e.g. BPF.
Should decide on a not-too-ugly way to show per-cpu stats in cgroupfs.
* cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be created
below non-partition parents, which should ease the management of partition
cpusets.
* A lot of code and documentation cleanup patches.
* tools/testing/selftests/cgroup/test_cpuset.c is added. This causes trivial
conflicts in .gitignore and Makefile under the directory against
fe3b1bf19b ("selftests: cgroup: add test_zswap program"). They can be
resolved by keeping lines from both branches.
-----BEGIN PGP SIGNATURE-----
iIQEABYIACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZPENTg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGcyBAP44cHwpSFxXe3cehxAzb1l/2BZXtzU5l48OqUQd
MwHyrwEAm7+MTVAR2xOF4f+oVM9KWmKj7oV7Clpixl1S7hHyjwE=
=FCc9
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- Per-cpu cpu usage stats are now tracked
This currently isn't printed out in the cgroupfs interface and can
only be accessed through e.g. BPF. Should decide on a not-too-ugly
way to show per-cpu stats in cgroupfs
- cpuset received some cleanups and prepatory patches for the pending
cpus.exclusive patchset which will allow cpuset partitions to be
created below non-partition parents, which should ease the management
of partition cpusets
- A lot of code and documentation cleanup patches
- tools/testing/selftests/cgroup/test_cpuset.c added
* tag 'cgroup-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (32 commits)
cgroup: Avoid -Wstringop-overflow warnings
cgroup:namespace: Remove unused cgroup_namespaces_init()
cgroup/rstat: Record the cumulative per-cpu time of cgroup and its descendants
cgroup: clean up if condition in cgroup_pidlist_start()
cgroup: fix obsolete function name in cgroup_destroy_locked()
Documentation: cgroup-v2.rst: Correct number of stats entries
cgroup: fix obsolete function name above css_free_rwork_fn()
cgroup/cpuset: fix kernel-doc
cgroup: clean up printk()
cgroup: fix obsolete comment above cgroup_create()
docs: cgroup-v1: fix typo
docs: cgroup-v1: correct the term of Page Cache organization in inode
cgroup/misc: Store atomic64_t reads to u64
cgroup/misc: Change counters to be explicit 64bit types
cgroup/misc: update struct members descriptions
cgroup: remove cgrp->kn check in css_populate_dir()
cgroup: fix obsolete function name
cgroup: use cached local variable parent in for loop
cgroup: remove obsolete comment above struct cgroupstats
cgroup: put cgroup_tryget_css() inside CONFIG_CGROUP_SCHED
...
Shadow stack's selftest utilizes the map_shadow_stack syscall. The
syscall is new with the feature, but the selftests cannot automatically
find the headers for the kernel source tree they are located in. This
resulted in the shadow stack test failing to build until the brand new
headers were installed.
To avoid this, a copy of the new uapi defines needed by the test were
included in the selftest (see link for discussion). When shadow stack was
merged the syscall number was changed, but the copy in the selftest was
not updated.
So update the copy of the syscall number define used when the required
headers are not installed, to have the final syscall number from the
merge.
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/lkml/Y%2FijdXoTAATt0+Ct@zn.tnic/
Link: https://lore.kernel.org/r/20230901181652.2583861-1-rick.p.edgecombe@intel.com
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Fixes: df57721f9a ("Merge tag 'x86_shstk_for_6.6-rc1' of [...]")
* Support for the new "riscv,isa-extensions" and "riscv,isa-base" device
tree interfaces for probing extensions.
* Support for userspace access to the performance counters.
* Support for more instructions in kprobes.
* Crash kernels can be allocated above 4GiB.
* Support for KCFI.
* Support for ELFs in !MMU configurations.
* ARCH_KMALLOC_MINALIGN has been reduced to 8.
* mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel).
* Also various fixes and cleanups.
-----BEGIN PGP SIGNATURE-----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=/tXb
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the new "riscv,isa-extensions" and "riscv,isa-base"
device tree interfaces for probing extensions
- Support for userspace access to the performance counters
- Support for more instructions in kprobes
- Crash kernels can be allocated above 4GiB
- Support for KCFI
- Support for ELFs in !MMU configurations
- ARCH_KMALLOC_MINALIGN has been reduced to 8
- mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel)
- Also various fixes and cleanups
* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
riscv: support PREEMPT_DYNAMIC with static keys
riscv: Move create_tmp_mapping() to init sections
riscv: Mark KASAN tmp* page tables variables as static
riscv: mm: use bitmap_zero() API
riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
riscv: remove redundant mv instructions
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
riscv: allow kmalloc() caches aligned to the smallest value
riscv: support the elf-fdpic binfmt loader
binfmt_elf_fdpic: support 64-bit systems
riscv: Allow CONFIG_CFI_CLANG to be selected
riscv/purgatory: Disable CFI
riscv: Add CFI error handling
riscv: Add ftrace_stub_graph
riscv: Add types to indirectly called assembly functions
...
While commit 90f0074cd9 ("selftests/bpf: fix a CI failure caused by vsock sockmap test")
fixes a receive failure of vsock sockmap test, there is still a write failure:
Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #211/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
./test_progs:vsock_unix_redir_connectible:1501: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
./test_progs:vsock_unix_redir_connectible:1501: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1501
The reason is that the vsock connection in the test is set to ESTABLISHED state
by function virtio_transport_recv_pkt, which is executed in a workqueue thread,
so when the user space test thread runs before the workqueue thread, this
problem occurs.
To fix it, before writing the connection, wait for it to be connected.
Fixes: d61bd8c1fd ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901031037.3314007-1-xukuohai@huaweicloud.com
The test uses perf stat to count the number of fib:fib_table_lookup
tracepoint hits for IPv4 and the number of fib6:fib6_table_lookup for
IPv6. The measured count is checked to be within 5% of the total number
of packets sent via veth1.
Signed-off-by: Sriram Yagnaraman <sriram.yagnaraman@est.tech>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using the "install" or targets depending on install, e.g. "gen_tar",
the BPF machine flavors weren't included.
A command like:
| make ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- O=/workspace/kbuild \
| HOSTCC=gcc FORMAT= SKIP_TARGETS="arm64 ia64 powerpc sparc64 x86 sgx" \
| -C tools/testing/selftests gen_tar
would not include bpf/no_alu32, bpf/cpuv4, or bpf/bpf-gcc.
Include the BPF machine flavors for "install" make target.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230831162954.111485-1-bjorn@kernel.org
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system.
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the Radix
MMU to avoid a broadcast TLBIE flush on exit.
- Drop the exclusion between ptrace/perf watchpoints, and drop the now unused
associated arch hooks.
- Add support for the "nohlt" command line option to disable CPU idle.
- Add support for -fpatchable-function-entry for ftrace, with GCC >= 13.1.
- Rework memory block size determination, and support 256MB size on systems
with GPUs that have hotpluggable memory.
- Various other small features and fixes.
Thanks to: Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev,
Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam Menghani, Geoff Levand,
Hari Bathini, Immad Mir, Jialin Zhang, Joel Stanley, Jordan Niethe, Justin
Stitt, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent Dufour, Liang He,
Linus Walleij, Mahesh Salgaonkar, Masahiro Yamada, Michal Suchanek, Nageswara
R Sastry, Nathan Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick
Desaulniers, Omar Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell
Currey, Sourabh Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav
Jain, Xiongfeng Wang, Yuan Tan, Zhang Rui, Zheng Zengkai.
-----BEGIN PGP SIGNATURE-----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=5g7K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add HOTPLUG_SMT support (/sys/devices/system/cpu/smt) and honour the
configured SMT state when hotplugging CPUs into the system
- Combine final TLB flush and lazy TLB mm shootdown IPIs when using the
Radix MMU to avoid a broadcast TLBIE flush on exit
- Drop the exclusion between ptrace/perf watchpoints, and drop the now
unused associated arch hooks
- Add support for the "nohlt" command line option to disable CPU idle
- Add support for -fpatchable-function-entry for ftrace, with GCC >=
13.1
- Rework memory block size determination, and support 256MB size on
systems with GPUs that have hotpluggable memory
- Various other small features and fixes
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Benjamin Gray, Christophe Leroy, Frederic Barrat, Gautam
Menghani, Geoff Levand, Hari Bathini, Immad Mir, Jialin Zhang, Joel
Stanley, Jordan Niethe, Justin Stitt, Kajol Jain, Kees Cook, Krzysztof
Kozlowski, Laurent Dufour, Liang He, Linus Walleij, Mahesh Salgaonkar,
Masahiro Yamada, Michal Suchanek, Nageswara R Sastry, Nathan Chancellor,
Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nick Desaulniers, Omar
Sandoval, Randy Dunlap, Reza Arbab, Rob Herring, Russell Currey, Sourabh
Jain, Thomas Gleixner, Trevor Woerner, Uwe Kleine-König, Vaibhav Jain,
Xiongfeng Wang, Yuan Tan, Zhang Rui, and Zheng Zengkai.
* tag 'powerpc-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (135 commits)
macintosh/ams: linux/platform_device.h is needed
powerpc/xmon: Reapply "Relax frame size for clang"
powerpc/mm/book3s64: Use 256M as the upper limit with coherent device memory attached
powerpc/mm/book3s64: Fix build error with SPARSEMEM disabled
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
powerpc/mpc5xxx: Add missing fwnode_handle_put()
powerpc/config: Disable SLAB_DEBUG_ON in skiroot
powerpc/pseries: Remove unused hcall tracing instruction
powerpc/pseries: Fix hcall tracepoints with JUMP_LABEL=n
powerpc: dts: add missing space before {
powerpc/eeh: Use pci_dev_id() to simplify the code
powerpc/64s: Move CPU -mtune options into Kconfig
powerpc/powermac: Fix unused function warning
powerpc/pseries: Rework lppaca_shared_proc() to avoid DEBUG_PREEMPT
powerpc: Don't include lppaca.h in paca.h
powerpc/pseries: Move hcall_vphn() prototype into vphn.h
powerpc/pseries: Move VPHN constants into vphn.h
cxl: Drop unused detach_spa()
powerpc: Drop zalloc_maybe_bootmem()
powerpc/powernv: Use struct opal_prd_msg in more places
...
Convert IBT selftest to asm to fix objtool warning
-----BEGIN PGP SIGNATURE-----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=3UUm
-----END PGP SIGNATURE-----
Merge tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
-----BEGIN PGP SIGNATURE-----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=E2KD
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.6-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----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=dHTQ
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.6' of https://github.com/kvm-x86/linux into HEAD
KVM: x86: Selftests changes for 6.6:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry
Recent commit [1] broke d_path test, because now filp_close is not called
directly from sys_close, but eventually later when the file is finally
released.
As suggested by Hou Tao we don't need to re-hook the bpf program, but just
instead we can use sys_close_range to trigger filp_close synchronously.
[1] 021a160abf ("fs: use __fput_sync in close(2)")
Suggested-by: Hou Tao <houtao@huaweicloud.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230831141103.359810-1-jolsa@kernel.org
This includes a shared branch with VFIO:
- Enhance VFIO_DEVICE_GET_PCI_HOT_RESET_INFO so it can work with iommufd
FDs, not just group FDs. This removes the last place in the uAPI that
required the group fd.
- Give VFIO a new device node /dev/vfio/devices/vfioX (the so called cdev
node) which is very similar to the FD from VFIO_GROUP_GET_DEVICE_FD.
The cdev is associated with the struct device that the VFIO driver is
bound to and shows up in sysfs in the normal way.
- Add a cdev IOCTL VFIO_DEVICE_BIND_IOMMUFD which allows a newly opened
/dev/vfio/devices/vfioX to be associated with an IOMMUFD, this replaces
the VFIO_GROUP_SET_CONTAINER flow.
- Add cdev IOCTLs VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT to allow the IOMMU
translation the vfio_device is associated with to be changed. This is a
significant new feature for VFIO as previously each vfio_device was
fixed to a single translation.
The translation is under the control of iommufd, so it can be any of
the different translation modes that iommufd is learning to create.
At this point VFIO has compilation options to remove the legacy interfaces
and in modern mode it behaves like a normal driver subsystem. The
/dev/vfio/iommu and /dev/vfio/groupX nodes are not present and each
vfio_device only has a /dev/vfio/devices/vfioX cdev node that represents
the device.
On top of this is built some of the new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that hold
the translation mapping. This is the basic functionality for the
normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors when
emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW that
owns a VFIO device. This includes support for the Intel iommu, and
patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kapis iommufd_ctx_has_group(), iommufd_device_to_ictx(),
iommufd_device_to_id(), iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some per-group
data
- Reorganize how the internal hwpt allocation flows to have more robust
locking
- Improve the access interfaces to support detach and replace of an IOAS
from an access
- New selftests and a rework of how the selftests creates a mock iommu
driver to be more like a real iommu driver
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZO/QDQAKCRCFwuHvBreF
YZ2iAP4hNEF6MJLRI2A28V3I/80f3x9Ed3Cirp/Q8ZdVEE+HYQD8DFaafJ0y3iPQ
5mxD4ZrZ9KfUns/gUqCT5oPHjrcvSAM=
=EQCw
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"On top of the vfio updates is built some new iommufd functionality:
- IOMMU_HWPT_ALLOC allows userspace to directly create the low level
IO Page table objects and affiliate them with IOAS objects that
hold the translation mapping. This is the basic functionality for
the normal IOMMU_DOMAIN_PAGING domains.
- VFIO_DEVICE_ATTACH_IOMMUFD_PT can be used to replace the current
translation. This is wired up to through all the layers down to the
driver so the driver has the ability to implement a hitless
replacement. This is necessary to fully support guest behaviors
when emulating HW (eg guest atomic change of translation)
- IOMMU_GET_HW_INFO returns information about the IOMMU driver HW
that owns a VFIO device. This includes support for the Intel iommu,
and patches have been posted for all the other server IOMMU.
Along the way are a number of internal items:
- New iommufd kernel APIs: iommufd_ctx_has_group(),
iommufd_device_to_ictx(), iommufd_device_to_id(),
iommufd_access_detach(), iommufd_ctx_from_fd(),
iommufd_device_replace()
- iommufd now internally tracks iommu_groups as it needs some
per-group data
- Reorganize how the internal hwpt allocation flows to have more
robust locking
- Improve the access interfaces to support detach and replace of an
IOAS from an access
- New selftests and a rework of how the selftests creates a mock
iommu driver to be more like a real iommu driver"
Link: https://lore.kernel.org/lkml/ZO%2FTe6LU1ENf58ZW@nvidia.com/
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (34 commits)
iommufd/selftest: Don't leak the platform device memory when unloading the module
iommu/vt-d: Implement hw_info for iommu capability query
iommufd/selftest: Add coverage for IOMMU_GET_HW_INFO ioctl
iommufd: Add IOMMU_GET_HW_INFO
iommu: Add new iommu op to get iommu hardware information
iommu: Move dev_iommu_ops() to private header
iommufd: Remove iommufd_ref_to_users()
iommufd/selftest: Make the mock iommu driver into a real driver
vfio: Support IO page table replacement
iommufd/selftest: Add IOMMU_TEST_OP_ACCESS_REPLACE_IOAS coverage
iommufd: Add iommufd_access_replace() API
iommufd: Use iommufd_access_change_ioas in iommufd_access_destroy_object
iommufd: Add iommufd_access_change_ioas(_id) helpers
iommufd: Allow passing in iopt_access_list_id to iopt_remove_access()
vfio: Do not allow !ops->dma_unmap in vfio_pin/unpin_pages()
iommufd/selftest: Add a selftest for IOMMU_HWPT_ALLOC
iommufd/selftest: Return the real idev id from selftest mock_domain
iommufd: Add IOMMU_HWPT_ALLOC
iommufd/selftest: Test iommufd_device_replace()
iommufd: Make destroy_rwsem use a lock class per object type
...
We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit;
this also involves enabling UML builds of ALSA since that's the
default KUnit test environment which pulls in the addition of some
stubs to the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements
-----BEGIN PGP SIGNATURE-----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=Rr0i
-----END PGP SIGNATURE-----
Merge tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"We've received a fairly wide range of changes at this time, including
for ALSA and ASoC core, but all of them are rather small changes.
Here are some highlights:
ALSA / ASoC Core:
- Fixes of inconsistent locking around control API helpers
- A few new control API functions and cleanups
- Workarounds for potential UAFs by delayed kobj releases
- Unified PCM copy ops with iov_iter
- Continued efforts for ASoC API cleanups
ASoC:
- An adaptor to allow use of IIO DACs and ADCs in ASoC which pulls in
some IIO changes
- Create a library function for intlog10() and use it in the NAU8825
driver
- Convert drivers to use the more modern maple tree register cache
- Lots of work on the SOF framework, AMD and Intel drivers, including
a lot of cleanup and new device support
- Standardization of the presentation of jacks from drivers
- Provision of some generic sound card DT properties
- Support for AMD Van Gogh, AMD machines with MAX98388 and NAU8821,
AWInic AW88261, Cirrus Logic CS35L36 and CS42L43, various Intel
platforms including AVS machines with ES8336 and RT5663, Mediatek
MT7986, NXP i.MX93, RealTek RT1017 and StarFive JH7110
Others:
- New test coverage including ASoC and topology tests in KUnit; this
also involves enabling UML builds of ALSA since that's the default
KUnit test environment which pulls in the addition of some stubs to
the driver
- More enhancement of pcmtest driver
- A few fixes / enhancements of MIDI 2.0 UMP core
- Using PCI definitions in allover HD-audio code
- Support for Cirrus CS35L56 and TI TAS2781 HD-audio sub-codecs
- CS35L41 HD-audio sub-codec improvements
- Continued emu10k1 improvements"
* tag 'sound-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (693 commits)
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ASoC: dwc: i2s: Fix unused functions
ALSA: usb-audio: Don't try to submit URBs after disconnection
ALSA: emu10k1: add separate documentation for E-MU cards
ALSA: emu10k1: more documentation updates
ALSA: emu10k1: de-duplicate audigy-mixer.rst vs. sb-live-mixer.rst
ALSA: ump: Fix -Wformat-truncation warnings
ALSA: hda: Add missing dependency on CONFIG_EFI for Cirrus/TI sub-codecs
ALSA: doc: Fix missing backquote in midi-2.0.rst
ALSA: hda/realtek: Add quirk for mute LEDs on HP ENVY x360 15-eu0xxx
ALSA: hda/tas2781: Switch back to use struct i2c_driver's .probe()
ASoC: soc-core.c: Do not error if a DAI link component is not found
ASoC: codecs: Fix error code in aw88261_i2c_probe()
ASoC: audio-graph-card.c: move audio_graph_parse_of()
ASoC: cs42l43: Use new-style PM runtime macros
ALSA: documentation: Add description for USB MIDI 2.0 gadget driver
ALSA: ump: Don't create unused substreams for static blocks
ALSA: ump: Fill group names for legacy rawmidi substreams
ALSA: usb-audio: Attach legacy rawmidi after probing all UMP EPs
ALSA: ac97: Fix possible error value of *rac97
...
Occasionally, with './test_progs -j' on my vm, I will hit the
following failure:
test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
test_cgroup_iter_sleepable:PASS:skel_open 0 nsec
test_cgroup_iter_sleepable:PASS:skel_load 0 nsec
test_cgroup_iter_sleepable:PASS:attach_iter 0 nsec
test_cgroup_iter_sleepable:PASS:iter_create 0 nsec
test_cgroup_iter_sleepable:FAIL:cgroup_id unexpected cgroup_id: actual 1 != expected 2812
#48/5 cgrp_local_storage/cgroup_iter_sleepable:FAIL
#48 cgrp_local_storage:FAIL
Finally, I decided to do some investigation since the test is introduced
by myself. It turns out the reason is due to cgroup_fd with value 0.
In cgroup_iter, a cgroup_fd of value 0 means the root cgroup.
/* from cgroup_iter.c */
if (fd)
cgrp = cgroup_v1v2_get_from_fd(fd);
else if (id)
cgrp = cgroup_get_from_id(id);
else /* walk the entire hierarchy by default. */
cgrp = cgroup_get_from_path("/");
That is why we got cgroup_id 1 instead of expected 2812.
Why we got a cgroup_fd 0? Nobody should really touch 'stdin' (fd 0) in
test_progs. I traced 'close' syscall with stack trace and found the root
cause, which is a bug in bpf_obj_pinning.c. Basically, the code closed
fd 0 although it should not. Fixing the bug in bpf_obj_pinning.c also
resolved the above cgroup_iter_sleepable subtest failure.
Fixes: 3b22f98e5a ("selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230827150551.1743497-1-yonghong.song@linux.dev
("refactor Kconfig to consolidate KEXEC and CRASH options").
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h").
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands").
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions").
- Switch the handling of kdump from a udev scheme to in-kernel handling,
by Eric DeVolder ("crash: Kernel handling of CPU and memory hot
un/plug").
- Many singleton patches to various parts of the tree
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO2GpAAKCRDdBJ7gKXxA
juW3AQD1moHzlSN6x9I3tjm5TWWNYFoFL8af7wXDJspp/DWH/AD/TO0XlWWhhbYy
QHy7lL0Syha38kKLMXTM+bN6YQHi9AU=
=WJQa
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- An extensive rework of kexec and crash Kconfig from Eric DeVolder
("refactor Kconfig to consolidate KEXEC and CRASH options")
- kernel.h slimming work from Andy Shevchenko ("kernel.h: Split out a
couple of macros to args.h")
- gdb feature work from Kuan-Ying Lee ("Add GDB memory helper
commands")
- vsprintf inclusion rationalization from Andy Shevchenko
("lib/vsprintf: Rework header inclusions")
- Switch the handling of kdump from a udev scheme to in-kernel
handling, by Eric DeVolder ("crash: Kernel handling of CPU and memory
hot un/plug")
- Many singleton patches to various parts of the tree
* tag 'mm-nonmm-stable-2023-08-28-22-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (81 commits)
document while_each_thread(), change first_tid() to use for_each_thread()
drivers/char/mem.c: shrink character device's devlist[] array
x86/crash: optimize CPU changes
crash: change crash_prepare_elf64_headers() to for_each_possible_cpu()
crash: hotplug support for kexec_load()
x86/crash: add x86 crash hotplug support
crash: memory and CPU hotplug sysfs attributes
kexec: exclude elfcorehdr from the segment digest
crash: add generic infrastructure for crash hotplug support
crash: move a few code bits to setup support of crash hotplug
kstrtox: consistently use _tolower()
kill do_each_thread()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
scripts/bloat-o-meter: count weak symbol sizes
treewide: drop CONFIG_EMBEDDED
lockdep: fix static memory detection even more
lib/vsprintf: declare no_hash_pointers in sprintf.h
lib/vsprintf: split out sprintf() and friends
kernel/fork: stop playing lockless games for exe_file replacement
adfs: delete unused "union adfs_dirtail" definition
...
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support tracking
KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the GENERIC_IOREMAP
ioremap()/iounmap() code ("mm: ioremap: Convert architectures to take
GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency improvements
("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation, from
Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code ("Two
minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle most
file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for memmap
on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table range
API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM subsystem
documentation ("Improve mm documentation").
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZO1JUQAKCRDdBJ7gKXxA
jrMwAP47r/fS8vAVT3zp/7fXmxaJYTK27CTAM881Gw1SDhFM/wEAv8o84mDenCg6
Nfio7afS1ncD+hPYT8947UnLxTgn+ww=
=Afws
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- Some swap cleanups from Ma Wupeng ("fix WARN_ON in
add_to_avail_list")
- Peter Xu has a series (mm/gup: Unify hugetlb, speed up thp") which
reduces the special-case code for handling hugetlb pages in GUP. It
also speeds up GUP handling of transparent hugepages.
- Peng Zhang provides some maple tree speedups ("Optimize the fast path
of mas_store()").
- Sergey Senozhatsky has improved te performance of zsmalloc during
compaction (zsmalloc: small compaction improvements").
- Domenico Cerasuolo has developed additional selftest code for zswap
("selftests: cgroup: add zswap test program").
- xu xin has doe some work on KSM's handling of zero pages. These
changes are mainly to enable the user to better understand the
effectiveness of KSM's treatment of zero pages ("ksm: support
tracking KSM-placed zero-pages").
- Jeff Xu has fixes the behaviour of memfd's
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED sysctl ("mm/memfd: fix sysctl
MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED").
- David Howells has fixed an fscache optimization ("mm, netfs, fscache:
Stop read optimisation when folio removed from pagecache").
- Axel Rasmussen has given userfaultfd the ability to simulate memory
poisoning ("add UFFDIO_POISON to simulate memory poisoning with
UFFD").
- Miaohe Lin has contributed some routine maintenance work on the
memory-failure code ("mm: memory-failure: remove unneeded PageHuge()
check").
- Peng Zhang has contributed some maintenance work on the maple tree
code ("Improve the validation for maple tree and some cleanup").
- Hugh Dickins has optimized the collapsing of shmem or file pages into
THPs ("mm: free retracted page table by RCU").
- Jiaqi Yan has a patch series which permits us to use the healthy
subpages within a hardware poisoned huge page for general purposes
("Improve hugetlbfs read on HWPOISON hugepages").
- Kemeng Shi has done some maintenance work on the pagetable-check code
("Remove unused parameters in page_table_check").
- More folioification work from Matthew Wilcox ("More filesystem folio
conversions for 6.6"), ("Followup folio conversions for zswap"). And
from ZhangPeng ("Convert several functions in page_io.c to use a
folio").
- page_ext cleanups from Kemeng Shi ("minor cleanups for page_ext").
- Baoquan He has converted some architectures to use the
GENERIC_IOREMAP ioremap()/iounmap() code ("mm: ioremap: Convert
architectures to take GENERIC_IOREMAP way").
- Anshuman Khandual has optimized arm64 tlb shootdown ("arm64: support
batched/deferred tlb shootdown during page reclamation/migration").
- Better maple tree lockdep checking from Liam Howlett ("More strict
maple tree lockdep"). Liam also developed some efficiency
improvements ("Reduce preallocations for maple tree").
- Cleanup and optimization to the secondary IOMMU TLB invalidation,
from Alistair Popple ("Invalidate secondary IOMMU TLB on permission
upgrade").
- Ryan Roberts fixes some arm64 MM selftest issues ("selftests/mm fixes
for arm64").
- Kemeng Shi provides some maintenance work on the compaction code
("Two minor cleanups for compaction").
- Some reduction in mmap_lock pressure from Matthew Wilcox ("Handle
most file-backed faults under the VMA lock").
- Aneesh Kumar contributes code to use the vmemmap optimization for DAX
on ppc64, under some circumstances ("Add support for DAX vmemmap
optimization for ppc64").
- page-ext cleanups from Kemeng Shi ("add page_ext_data to get client
data in page_ext"), ("minor cleanups to page_ext header").
- Some zswap cleanups from Johannes Weiner ("mm: zswap: three
cleanups").
- kmsan cleanups from ZhangPeng ("minor cleanups for kmsan").
- VMA handling cleanups from Kefeng Wang ("mm: convert to
vma_is_initial_heap/stack()").
- DAMON feature work from SeongJae Park ("mm/damon/sysfs-schemes:
implement DAMOS tried total bytes file"), ("Extend DAMOS filters for
address ranges and DAMON monitoring targets").
- Compaction work from Kemeng Shi ("Fixes and cleanups to compaction").
- Liam Howlett has improved the maple tree node replacement code
("maple_tree: Change replacement strategy").
- ZhangPeng has a general code cleanup - use the K() macro more widely
("cleanup with helper macro K()").
- Aneesh Kumar brings memmap-on-memory to ppc64 ("Add support for
memmap on memory feature on ppc64").
- pagealloc cleanups from Kemeng Shi ("Two minor cleanups for pcp list
in page_alloc"), ("Two minor cleanups for get pageblock
migratetype").
- Vishal Moola introduces a memory descriptor for page table tracking,
"struct ptdesc" ("Split ptdesc from struct page").
- memfd selftest maintenance work from Aleksa Sarai ("memfd: cleanups
for vm.memfd_noexec").
- MM include file rationalization from Hugh Dickins ("arch: include
asm/cacheflush.h in asm/hugetlb.h").
- THP debug output fixes from Hugh Dickins ("mm,thp: fix sloppy text
output").
- kmemleak improvements from Xiaolei Wang ("mm/kmemleak: use
object_cache instead of kmemleak_initialized").
- More folio-related cleanups from Matthew Wilcox ("Remove _folio_dtor
and _folio_order").
- A VMA locking scalability improvement from Suren Baghdasaryan
("Per-VMA lock support for swap and userfaults").
- pagetable handling cleanups from Matthew Wilcox ("New page table
range API").
- A batch of swap/thp cleanups from David Hildenbrand ("mm/swap: stop
using page->private on tail pages for THP_SWAP + cleanups").
- Cleanups and speedups to the hugetlb fault handling from Matthew
Wilcox ("Change calling convention for ->huge_fault").
- Matthew Wilcox has also done some maintenance work on the MM
subsystem documentation ("Improve mm documentation").
* tag 'mm-stable-2023-08-28-18-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (489 commits)
maple_tree: shrink struct maple_tree
maple_tree: clean up mas_wr_append()
secretmem: convert page_is_secretmem() to folio_is_secretmem()
nios2: fix flush_dcache_page() for usage from irq context
hugetlb: add documentation for vma_kernel_pagesize()
mm: add orphaned kernel-doc to the rst files.
mm: fix clean_record_shared_mapping_range kernel-doc
mm: fix get_mctgt_type() kernel-doc
mm: fix kernel-doc warning from tlb_flush_rmaps()
mm: remove enum page_entry_size
mm: allow ->huge_fault() to be called without the mmap_lock held
mm: move PMD_ORDER to pgtable.h
mm: remove checks for pte_index
memcg: remove duplication detection for mem_cgroup_uncharge_swap
mm/huge_memory: work on folio->swap instead of page->private when splitting folio
mm/swap: inline folio_set_swap_entry() and folio_swap_entry()
mm/swap: use dedicated entry for swap in folio
mm/swap: stop using page->private on tail pages for THP_SWAP
selftests/mm: fix WARNING comparing pointer to 0
selftests: cgroup: fix test_kmem_memcg_deletion kernel mem check
...
Core
----
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with large
writes operations.
- Store netdevs in an xarray, to simplify iterating over netdevs.
- Refactor nexthop selection for multipath routes.
- Improve sched class lifetime handling.
- Add backup nexthop ID support for bridge.
- Implement drop reasons support in openvswitch.
- Several data races annotations and fixes.
- Constify the sk parameter of routing functions.
- Prepend kernel version to netconsole message.
Protocols
---------
- Implement support for TCP probing the peer being under memory
pressure.
- Remove hard coded limitation on IPv6 specific info placement
inside the socket struct.
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated
per socket scaling factor.
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes.
- In-kernel support for the TLS alert protocol.
- Better support for UDP reuseport with connected sockets.
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size.
- Get rid of additional ancillary per MPTCP connection struct socket.
- Implement support for BPF-based MPTCP packet schedulers.
- Format MPTCP subtests selftests results in TAP.
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation.
BPF
---
- Multi-buffer support in AF_XDP.
- Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds.
- Implement an fd-based tc BPF attach API (TCX) and BPF link support on
top of it.
- Add SO_REUSEPORT support for TC bpf_sk_assign.
- Support new instructions from cpu v4 to simplify the generated code and
feature completeness, for x86, arm64, riscv64.
- Support defragmenting IPv(4|6) packets in BPF.
- Teach verifier actual bounds of bpf_get_smp_processor_id()
and fix perf+libbpf issue related to custom section handling.
- Introduce bpf map element count and enable it for all program types.
- Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy.
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress.
- Add uprobe support for the bpf_get_func_ip helper.
- Check skb ownership against full socket.
- Support for up to 12 arguments in BPF trampoline.
- Extend link_info for kprobe_multi and perf_event links.
Netfilter
---------
- Speed-up process exit by aborting ruleset validation if a
fatal signal is pending.
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types.
Driver API
----------
- Page pool optimizations, to improve data locality and cache usage.
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the need
for raw ioctl() handling in drivers.
- Simplify genetlink dump operations (doit/dumpit) providing them
the common information already populated in struct genl_info.
- Extend and use the yaml devlink specs to [re]generate the split ops.
- Introduce devlink selective dumps, to allow SF filtering SF based on
handle and other attributes.
- Add yaml netlink spec for netlink-raw families, allow route, link and
address related queries via the ynl tool.
- Remove phylink legacy mode support.
- Support offload LED blinking to phy.
- Add devlink port function attributes for IPsec.
New hardware / drivers
----------------------
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers
-------
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=9CsR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations
- Store netdevs in an xarray, to simplify iterating over netdevs
- Refactor nexthop selection for multipath routes
- Improve sched class lifetime handling
- Add backup nexthop ID support for bridge
- Implement drop reasons support in openvswitch
- Several data races annotations and fixes
- Constify the sk parameter of routing functions
- Prepend kernel version to netconsole message
Protocols:
- Implement support for TCP probing the peer being under memory
pressure
- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct
- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor
- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes
- In-kernel support for the TLS alert protocol
- Better support for UDP reuseport with connected sockets
- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size
- Get rid of additional ancillary per MPTCP connection struct socket
- Implement support for BPF-based MPTCP packet schedulers
- Format MPTCP subtests selftests results in TAP
- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation
BPF:
- Multi-buffer support in AF_XDP
- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds
- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it
- Add SO_REUSEPORT support for TC bpf_sk_assign
- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64
- Support defragmenting IPv(4|6) packets in BPF
- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling
- Introduce bpf map element count and enable it for all program types
- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress
- Add uprobe support for the bpf_get_func_ip helper
- Check skb ownership against full socket
- Support for up to 12 arguments in BPF trampoline
- Extend link_info for kprobe_multi and perf_event links
Netfilter:
- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending
- Allow NLA_POLICY_MASK to be used with BE16/BE32 types
Driver API:
- Page pool optimizations, to improve data locality and cache usage
- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers
- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info
- Extend and use the yaml devlink specs to [re]generate the split ops
- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes
- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool
- Remove phylink legacy mode support
- Support offload LED blinking to phy
- Add devlink port function attributes for IPsec
New hardware / drivers:
- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy
- WiFi:
- MediaTek mt7981 support
- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips
- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925
Drivers:
- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution
- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support
- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs
- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support
- Connector:
- support for event filtering"
* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...
This is a much quieter release than the past few, there's one small API
addition that I noticed a user for in ALSA and a bunch of cleanups:
- Provide an interface for determining if a register is present in the
cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary bodges
that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTp43QACgkQJNaLcl1U
h9BjUQf/RDJztYDL/ELIxVPfdFWAgTfAErcRgKpdpnrhMR0GljGYNyrTMwUBbnuF
+EL2v+k34wDNGobLbnGaHJIMb+r26QrHCoX9Zm0r/b5z9v3yS3QXco/MueZyMz45
SYbiEUnXj/WjYUUtVpVw6nxnREH6XpOZ1080XF4Bg9YpyCiq7128WJwivuT8XLJM
qZSb4DOQXFV26nitpTuJMkRIS1FgIh5ZKAPWpvZfP+wOStZhW3IFGlWIAkOQQ5gK
PqFA0BQV1fOVttjRGAR2sKCS4MfuIkIHmCfSfvNfLQG2GW86zb+Bpi0BFEUnl4Py
dqzztIknq19fWe9mCElSrdww25M2vg==
=fqmz
-----END PGP SIGNATURE-----
Merge tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"This is a much quieter release than the past few, there's one small
API addition that I noticed a user for in ALSA and a bunch of
cleanups:
- Provide an interface for determining if a register is present in
the cache and add a user of it in ALSA.
- Full support for dynamic allocations, following the temporary
bodges that were done as fixes in the previous release.
- Remove the unused and questionably working 64 bit support"
* tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fix the type used for a bitmap pointer
regmap: Remove dynamic allocation warnings for rbtree and maple
regmap: rbtree: Use alloc_flags for memory allocations
regmap: maple: Use alloc_flags for memory allocations
regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches
ALSA: hda: Use regcache_reg_cached() rather than open coding
regmap: Provide test for regcache_reg_present()
regmap: Let users check if a register is cached
regmap: Provide user selectable option to enable regmap
regmap: mmio: Remove unused 64-bit support code
regmap: cache: Revert "Add 64-bit mode support"
regmap: Revert "add 64-bit mode support" and Co.
This nolibc update for Linux 6.6-rc1 consists of:
Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts,
path to log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer
-----BEGIN PGP SIGNATURE-----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=OCH0
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull nolibc updates from Shuah Khan:
"Nolibc:
- improved portability by removing build errors with -ENOSYS
- added syscall6() on MIPS to support pselect6() and mmap()
- added setvbuf(), rmdir(), pipe(), pipe2()
- add support for ppc/ppc64
- environ is no longer optional
- fixed frame pointer issues at -O0
- dropped sys_stat() in favor of sys_statx()
- centralized _start_c() to remove lots of asm code
- switched size_t to __SIZE_TYPE__
Selftests:
- improved status reporting (success/warning/failure counts, path to
log file)
- various code cleanups (indent, unused variables, ...)
- more consistent test numbering
- enabled compiler warnings
- dropped unreliable chmod_net test
- improved reliability (create /dev/zero & /tmp, rely less on /proc)
- new tests (brk/sbrk/mmap/munmap)
- improved compatibility with musl
- new run-nolibc-test target to build and run natively
- new run-libc-test target to build and run against native libc
- made the cmdline parser more reliable against boolean arguments
- dropped dependency on memfd for vfprintf() test
- nolibc-test is no longer stripped
- added support for extending ARCH via XARCH
Other:
- add Thomas as co-maintainer"
* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
tools/nolibc: avoid undesired casts in the __sysret() macro
tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
tools/nolibc: silence ppc64 compile warnings
selftests/nolibc: libc-test: use HOSTCC instead of CC
tools/nolibc: stackprotector.h: make __stack_chk_init static
selftests/nolibc: allow report with existing test log
selftests/nolibc: add test support for ppc64
selftests/nolibc: add test support for ppc64le
selftests/nolibc: add test support for ppc
selftests/nolibc: add XARCH and ARCH mapping support
tools/nolibc: add support for powerpc64
tools/nolibc: add support for powerpc
MAINTAINERS: nolibc: add myself as co-maintainer
selftests/nolibc: enable compiler warnings
selftests/nolibc: don't strip nolibc-test
selftests/nolibc: prevent out of bounds access in expect_vfprintf
selftests/nolibc: use correct return type for read() and write()
selftests/nolibc: avoid sign-compare warnings
selftests/nolibc: avoid unused parameter warnings
selftests/nolibc: make functions static if possible
...
This kunit update for Linux 6.6.rc1 consists of:
-- Adds support for running Rust documentation tests as KUnit tests
-- Makes init, str, sync, types doctests compilable/testable
-- Adds support for attributes API which include speed, modules
attributes, ability to filter and report attributes.
-- Adds support for marking tests slow using attributes API.
-- Adds attributes API documentation
-- Fixes to wild-memory-access bug in kunit_filter_suites() and
a possible memory leak in kunit_filter_suites()
-- Adds support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests.
-----BEGIN PGP SIGNATURE-----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=Nsb8
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- add support for running Rust documentation tests as KUnit tests
- make init, str, sync, types doctests compilable/testable
- add support for attributes API which include speed, modules
attributes, ability to filter and report attributes
- add support for marking tests slow using attributes API
- add attributes API documentation
- fix a wild-memory-access bug in kunit_filter_suites() and a possible
memory leak in kunit_filter_suites()
- add support for counting number of test suites in a module, list
action to kunit test modules, and test filtering on module tests
* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
kunit: fix struct kunit_attr header
kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
kunit: Allow kunit test modules to use test filtering
kunit: Make 'list' action available to kunit test modules
kunit: Report the count of test suites in a module
kunit: fix uninitialized variables bug in attributes filtering
kunit: fix possible memory leak in kunit_filter_suites()
kunit: fix wild-memory-access bug in kunit_filter_suites()
kunit: Add documentation of KUnit test attributes
kunit: add tests for filtering attributes
kunit: time: Mark test as slow using test attributes
kunit: memcpy: Mark tests as slow using test attributes
kunit: tool: Add command line interface to filter and report attributes
kunit: Add ability to filter attributes
kunit: Add module attribute
kunit: Add speed attribute
kunit: Add test attributes API structure
MAINTAINERS: add Rust KUnit files to the KUnit entry
rust: support running Rust documentation tests as KUnit ones
rust: types: make doctests compilable/testable
...
This Kselftest update for Linux 6.6-rc1 consists of a mix of fixes,
enhancements, and new tests. Bulk of the changes enhance and fix
rseq and resctrl tests. In addition, user_events, dmabuf-heaps and
perf_events are added to default kselftest build and test coverage.
A futex test fix, enhance prctl test coverage, and minor fixes are
included in this update.
-----BEGIN PGP SIGNATURE-----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=6fP4
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"A mix of fixes, enhancements, and new tests. Bulk of the changes
enhance and fix rseq and resctrl tests.
In addition, user_events, dmabuf-heaps and perf_events are added to
default kselftest build and test coverage. A futex test fix, enhance
prctl test coverage, and minor fixes are included in this update"
* tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (32 commits)
selftests: cachestat: use proper syscall number macro
selftests: cachestat: properly link in librt
selftests/futex: Order calls to futex_lock_pi
selftests: Hook more tests into the build infrastructure
selftests/user_events: Reenable build
selftests/filesystems: Add six consecutive 'x' characters to mktemp
selftests/rseq: Use rseq_unqual_scalar_typeof in macros
selftests/rseq: Fix arm64 buggy load-acquire/store-release macros
selftests/rseq: Implement rseq_unqual_scalar_typeof
selftests/rseq: Fix CID_ID typo in Makefile
selftests:prctl: add set-process-name to .gitignore
selftests:prctl: Fix make clean override warning
selftests/resctrl: Remove test type checks from cat_val()
selftests/resctrl: Pass the real number of tests to show_cache_info()
selftests/resctrl: Move CAT/CMT test global vars to function they are used in
selftests/resctrl: Don't use variable argument list for ->setup()
selftests/resctrl: Don't pass test name to fill_buf
selftests/resctrl: Improve parameter consistency in fill_buf
selftests/resctrl: Remove unnecessary startptr global from fill_buf
selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf()
...
CPU features and system registers:
* Advertise hinted conditional branch support (FEAT_HBC) to
userspace
* Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
* Fix macro name typo in SME documentation
Entry code:
* Unmask exceptions earlier on the system call entry path
Memory management:
* Don't bother clearing PTE_RDONLY for dirty ptes in
pte_wrprotect() and pte_modify()
Perf and PMU drivers:
* Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
* Fix hw_breakpoint single-stepping when called from bpf
* Fixes for DDR PMU on i.MX8MP SoC
* Add NUMA-awareness to Hisilicon PCIe PMU driver
* Fix locking dependency issue in Arm DMC620 PMU driver
* Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
* Add support for Arm CMN-700 r3 parts to the CMN PMU driver
* Add support for recent Arm Cortex CPU PMUs
* Update Hisilicon PMU maintainers
Selftests:
* Add a bunch of new features to the hwcap test (JSCVT, PMULL,
AES, SHA1, etc)
* Fix SSVE test to leave streaming-mode after grabbing the
signal context
* Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
* Allow compiler to warn on suspicious looking system register
expressions
* Work around SDEI firmware bug by aborting any running
handlers on a kernel crash
* Fix some harmless warnings when building with W=1
* Remove some unused function declarations
* Other minor fixes and cleanup
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmTon4QQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNG0nCAC9lTqppELnqXPA3FswONhtDBnKEufZHp0+
4+Z6CPjAYZpd7ruiezvxeZA62tZl3eX+tYOx+6lf4xYxFA5W/RQdmxM7e0mGJd+n
sgps85kxArApCgJR9zJiTCAIPXzKH5ObsFWWbcRljI9fiISVDTYn1JFAEx9UERI5
5yr6blYF2H115oD8V2f/0vVObGOAuiqNnzqJIuKL1I8H9xBK0pssrKvuCCN8J2o4
28+PeO7PzwWPiSfnO15bLd/bGuzbMCcexv4/DdjtLZaAanW7crJRVAzOon+URuVx
JXmkzQvXkOgSKnEFwfVRYTsUbtOz2cBafjSujVmjwIBymhbBCZR/
=WqmX
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"I think we have a bit less than usual on the architecture side, but
that's somewhat balanced out by a large crop of perf/PMU driver
updates and extensions to our selftests.
CPU features and system registers:
- Advertise hinted conditional branch support (FEAT_HBC) to userspace
- Avoid false positive "SANITY CHECK" warning when xCR registers
differ outside of the length field
Documentation:
- Fix macro name typo in SME documentation
Entry code:
- Unmask exceptions earlier on the system call entry path
Memory management:
- Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
and pte_modify()
Perf and PMU drivers:
- Initial support for Coresight TRBE devices on ACPI systems (the
coresight driver changes will come later)
- Fix hw_breakpoint single-stepping when called from bpf
- Fixes for DDR PMU on i.MX8MP SoC
- Add NUMA-awareness to Hisilicon PCIe PMU driver
- Fix locking dependency issue in Arm DMC620 PMU driver
- Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver
- Add support for Arm CMN-700 r3 parts to the CMN PMU driver
- Add support for recent Arm Cortex CPU PMUs
- Update Hisilicon PMU maintainers
Selftests:
- Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
SHA1, etc)
- Fix SSVE test to leave streaming-mode after grabbing the signal
context
- Add new test for SVE vector-length changes with SME enabled
Miscellaneous:
- Allow compiler to warn on suspicious looking system register
expressions
- Work around SDEI firmware bug by aborting any running handlers on a
kernel crash
- Fix some harmless warnings when building with W=1
- Remove some unused function declarations
- Other minor fixes and cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
drivers/perf: hisi: Update HiSilicon PMU maintainers
arm_pmu: acpi: Add a representative platform device for TRBE
arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
kselftest/arm64: Fix hwcaps selftest build
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
arm64/sysreg: refactor deprecated strncpy
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
kselftest/arm64: build BTI tests in output directory
perf/imx_ddr: don't enable counter0 if none of 4 counters are used
perf/imx_ddr: speed up overflow frequency of cycle
drivers/perf: hisi: Schedule perf session according to locality
kselftest/arm64: fix a memleak in zt_regs_run()
perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
perf/smmuv3: Add MODULE_ALIAS for module auto loading
perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
...
This pull request prevents some memory-exhaustion false-postitive failures
in scftorture testing.
-----BEGIN PGP SIGNATURE-----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=8rLK
-----END PGP SIGNATURE-----
Merge tag 'scftorture.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull smp_call_function torture-test updates from Paul McKenney:
"This prevents some memory-exhaustion false-postitive failures in
scftorture testing"
* tag 'scftorture.2023.08.15a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
scftorture: Add CONFIG_PREEMPT_DYNAMIC=n to NOPREEMPT scenario
scftorture: Pause testing after memory-allocation failure
scftorture: Forgive memory-allocation failure if KASAN
torture: Scale scftorture memory based on number of CPUs
doc.2023.07.14b: Documentation updates.
fixes.2023.08.16a: Miscellaneous fixes, perhaps most notably simplifying
SRCU_NOTIFIER_INIT() as suggested.
rcu-tasks.2023.07.24a: RCU Tasks updates, most notably treating
Tasks RCU callbacks as lazy while still treating synchronous
grace periods as urgent. Also fixes one bug that restores the
ability to apply debug-objects to RCU Tasks and another that
fixes a race condition that could result in false-positive
failures of the boot-time self-test code.
rcuscale.2023.07.14b: RCU-scalability performance-test updates,
most notably adding the ability to measure the RCU-Tasks's
grace-period kthread's CPU consumption. This proved
quite useful for the rcu-tasks.2023.07.24a work.
refscale.2023.07.14b: Reference-acquisition/release performance-test
updates, including a fix for an uninitialized wait_queue_head_t.
torture.2023.08.14a: Miscellaneous torture-test updates.
torturescripts.2023.07.20a: Torture-test scripting updates, including
removal of the non-longer-functional formal-verification scripts,
test builds of individual RCU Tasks flavors, better diagnostics
for loss of connectivity for distributed rcutorture tests,
disabling of reboot loops in qemu/KVM-based rcutorture testing,
and passing of init parameters to rcutorture's init program.
-----BEGIN PGP SIGNATURE-----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=EujZ
-----END PGP SIGNATURE-----
Merge tag 'rcu.2023.08.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney:
- Documentation updates
- Miscellaneous fixes, perhaps most notably simplifying
SRCU_NOTIFIER_INIT() as suggested
- RCU Tasks updates, most notably treating Tasks RCU callbacks as lazy
while still treating synchronous grace periods as urgent. Also fixes
one bug that restores the ability to apply debug-objects to RCU Tasks
and another that fixes a race condition that could result in
false-positive failures of the boot-time self-test code
- RCU-scalability performance-test updates, most notably adding the
ability to measure the RCU-Tasks's grace-period kthread's CPU
consumption. This proved quite useful for the RCU Tasks work
- Reference-acquisition/release performance-test updates, including a
fix for an uninitialized wait_queue_head_t
- Miscellaneous torture-test updates
- Torture-test scripting updates, including removal of the
non-longer-functional formal-verification scripts, test builds of
individual RCU Tasks flavors, better diagnostics for loss of
connectivity for distributed rcutorture tests, disabling of reboot
loops in qemu/KVM-based rcutorture testing, and passing of init
parameters to rcutorture's init program
* tag 'rcu.2023.08.21a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (64 commits)
rcu: Use WRITE_ONCE() for assignments to ->next for rculist_nulls
rcu: Make the rcu_nocb_poll boot parameter usable via boot config
rcu: Mark __rcu_irq_enter_check_tick() ->rcu_urgent_qs load
srcu,notifier: Remove #ifdefs in favor of SRCU Tiny srcu_usage
rcutorture: Stop right-shifting torture_random() return values
torture: Stop right-shifting torture_random() return values
torture: Move stutter_wait() timeouts to hrtimers
torture: Move torture_shuffle() timeouts to hrtimers
torture: Move torture_onoff() timeouts to hrtimers
torture: Make torture_hrtimeout_*() use TASK_IDLE
torture: Add lock_torture writer_fifo module parameter
torture: Add a kthread-creation callback to _torture_create_kthread()
rcu-tasks: Fix boot-time RCU tasks debug-only deadlock
rcu-tasks: Permit use of debug-objects with RCU Tasks flavors
checkpatch: Complain about unexpected uses of RCU Tasks Trace
torture: Cause mkinitrd.sh to indicate failure on compile errors
torture: Make init program dump command-line arguments
torture: Switch qemu from -nographic to -display none
torture: Add init-program support for loongarch
torture: Avoid torture-test reboot loops
...
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver).
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song).
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn).
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva).
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt).
- Convert nsproxy.count to refcount_t (Elena Reshetova).
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test.
- Fix build failure with gcc-plugins on GCC 14+.
- Fix selftests to respect SKIP for signal-delivery tests.
- Fix CFI warning for paravirt callback prototype.
- Clarify documentation for seq_show_option_n() usage.
-----BEGIN PGP SIGNATURE-----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=9ZWP
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"As has become normal, changes are scattered around the tree (either
explicitly maintainer Acked or for trivial stuff that went ignored):
- Carve out the new CONFIG_LIST_HARDENED as a more focused subset of
CONFIG_DEBUG_LIST (Marco Elver)
- Fix kallsyms lookup failure under Clang LTO (Yonghong Song)
- Clarify documentation for CONFIG_UBSAN_TRAP (Jann Horn)
- Flexible array member conversion not carried in other tree (Gustavo
A. R. Silva)
- Various strlcpy() and strncpy() removals not carried in other trees
(Azeem Shaikh, Justin Stitt)
- Convert nsproxy.count to refcount_t (Elena Reshetova)
- Add handful of __counted_by annotations not carried in other trees,
as well as an LKDTM test
- Fix build failure with gcc-plugins on GCC 14+
- Fix selftests to respect SKIP for signal-delivery tests
- Fix CFI warning for paravirt callback prototype
- Clarify documentation for seq_show_option_n() usage"
* tag 'hardening-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (23 commits)
LoadPin: Annotate struct dm_verity_loadpin_trusted_root_digest with __counted_by
kallsyms: Change func signature for cleanup_symbol_name()
kallsyms: Fix kallsyms_selftest failure
nsproxy: Convert nsproxy.count to refcount_t
integrity: Annotate struct ima_rule_opt_list with __counted_by
lkdtm: Add FAM_BOUNDS test for __counted_by
Compiler Attributes: counted_by: Adjust name and identifier expansion
um: refactor deprecated strncpy to memcpy
um: vector: refactor deprecated strncpy
alpha: Replace one-element array with flexible-array member
hardening: Move BUG_ON_DATA_CORRUPTION to hardening options
list: Introduce CONFIG_LIST_HARDENED
list_debug: Introduce inline wrappers for debug checks
compiler_types: Introduce the Clang __preserve_most function attribute
gcc-plugins: Rename last_stmt() for GCC 14+
selftests/harness: Actually report SKIP for signal tests
x86/paravirt: Fix tlb_remove_table function callback prototype warning
EISA: Replace all non-returning strlcpy with strscpy
perf: Replace strlcpy with strscpy
um: Remove strlcpy declaration
...
- Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter
Oskolkov). This touches the scheduler and perf but has been Acked by
Peter Zijlstra.
- Fix regression in syscall skipping and restart tracing on arm32.
This touches arch/arm/ but has been Acked by Arnd Bergmann.
-----BEGIN PGP SIGNATURE-----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=DI8R
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- Provide USER_NOTIFY flag for synchronous mode (Andrei Vagin, Peter
Oskolkov). This touches the scheduler and perf but has been Acked by
Peter Zijlstra.
- Fix regression in syscall skipping and restart tracing on arm32. This
touches arch/arm/ but has been Acked by Arnd Bergmann.
* tag 'seccomp-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Add missing kerndoc notations
ARM: ptrace: Restore syscall skipping for tracers
ARM: ptrace: Restore syscall restart tracing
selftests/seccomp: Handle arm32 corner cases better
perf/benchmark: add a new benchmark for seccom_unotify
selftest/seccomp: add a new test for the sync mode of seccomp_user_notify
seccomp: add the synchronous mode for seccomp_unotify
sched: add a few helpers to wake up tasks on the current cpu
sched: add WF_CURRENT_CPU and externise ttwu
seccomp: don't use semaphore and wait_queue together
-----BEGIN PGP SIGNATURE-----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=f9CF
-----END PGP SIGNATURE-----
Merge tag 'filelock-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
- new functionality for F_OFD_GETLK: requesting a type of F_UNLCK will
find info about whatever lock happens to be first in the given range,
regardless of type.
- an OFD lock selftest
- bugfix involving a UAF in a tracepoint
- comment typo fix
* tag 'filelock-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: fix KASAN: use-after-free in trace_event_raw_event_filelock_lock
fs/locks: Fix typo
selftests: add OFD lock tests
fs/locks: F_UNLCK extension for F_OFD_GETLK
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXT2QAKCRCRxhvAZXjc
olkFAQCT4nRkRTpBvbiv4DgvCIy+URqLNfHGxCxdAX1B09o3UwEAyepf1tz7aFpB
wB67V265JFDMWtvQkSx4ORNpAjZ9Kg0=
=Opqi
-----END PGP SIGNATURE-----
Merge tag 'v6.6-fs.proc.uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull procfs fixes from Christian Brauner:
"Mode changes to files under /proc/<pid>/ aren't supported ever since
commit 6d76fa58b0 ("Don't allow chmod() on the /proc/<pid>/ files").
Due to an oversight in commit 1b3044e39a ("procfs: fix pthread
cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD,
mode changes on /proc/thread-self/comm were accidently allowed.
Similar, mode changes for all files beneath /proc/<pid>/net/ are
blocked but mode changes on /proc/<pid>/net itself were accidently
allowed.
Both issues come down to not using the generic proc_setattr() helper
which blocks all mode changes. This is rectified with this pull
request.
This also removes a strange nolibc test that abused /proc/<pid>/net
for testing mode changes. Using procfs for this test never made a lot
of sense given procfs has special semantics for almost everything
anway.
Both changes are minor user-visible changes. It is however very
unlikely that mode changes on proc/<pid>/net and
/proc/thread-self/comm are something that userspace relies on"
* tag 'v6.6-fs.proc.uapi' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
procfs: block chmod on /proc/thread-self/comm
proc: use generic setattr() for /proc/$PID/net
selftests/nolibc: drop test chmod_net
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXT7QAKCRCRxhvAZXjc
ort3AP0VIK/oJk5skgjpinQrCfvtVz0XOtawuBtn0f1weIfb6AD9Hg1rqOKnQD5z
dkvn3xaEr3gPOVzqU5SvFwVoCM0cMwA=
=24Ha
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.fchmodat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull fchmodat2 system call from Christian Brauner:
"This adds the fchmodat2() system call. It is a revised version of the
fchmodat() system call, adding a missing flag argument. Support for
both AT_SYMLINK_NOFOLLOW and AT_EMPTY_PATH are included.
Adding this system call revision has been a longstanding request but
so far has always fallen through the cracks. While the kernel
implementation of fchmodat() does not have a flag argument the libc
provided POSIX-compliant fchmodat(3) version does. Both glibc and musl
have to implement a workaround in order to support AT_SYMLINK_NOFOLLOW
(see [1] and [2]).
The workaround is brittle because it relies not just on O_PATH and
O_NOFOLLOW semantics and procfs magic links but also on our rather
inconsistent symlink semantics.
This gives userspace a proper fchmodat2() system call that libcs can
use to properly implement fchmodat(3) and allows them to get rid of
their hacks. In this case it will immediately benefit them as the
current workaround is already defunct because of aformentioned
inconsistencies.
In addition to AT_SYMLINK_NOFOLLOW, give userspace the ability to use
AT_EMPTY_PATH with fchmodat2(). This is already possible with
fchownat() so there's no reason to not also support it for
fchmodat2().
The implementation is simple and comes with selftests. Implementation
of the system call and wiring up the system call are done as separate
patches even though they could arguably be one patch. But in case
there are merge conflicts from other system call additions it can be
beneficial to have separate patches"
Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=17eca54051ee28ba1ec3f9aed170a62630959143;hb=a492b1e5ef7ab50c6fdd4e4e9879ea5569ab0a6c#l35 [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c?id=718f363bc2067b6487900eddc9180c84e7739f80#n28 [2]
* tag 'v6.6-vfs.fchmodat2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests: fchmodat2: remove duplicate unneeded defines
fchmodat2: add support for AT_EMPTY_PATH
selftests: Add fchmodat2 selftest
arch: Register fchmodat2, usually as syscall 452
fs: Add fchmodat2()
Non-functional cleanup of a "__user * filename"
The rest of the updates for v6.6, some of the highlights include:
- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmTo6Y0ACgkQJNaLcl1U
h9AnaAf/XiBSnZl2i9wFckPy7bLcR74YrP1sFet5ZAqtpIt+/DvzQlgFAraHJ4tR
ScM2ZyyMwREaFhrHIXKLm8kbaOKeIjIMSxiHREVG9Wibq8d1TwaOHWAcXc9jMsQb
3G23Aizy2h5yD+/VTh8q6aV+fmYZJDfr1tIu8zWva90HcL2fMGvLjVdt24RNejTL
bgCC2GaaGP4pnC3xoBo1hGayvp0PES1BHVeyAXqMVscH+GCplPNJEdSHvU14OBck
1Nfjf5NVkh5G0pvrbG/yblsn1Zm5HRAzCE7gF1OHLFH27ygvp7fGk6TIXXpvw23c
OSvveYee2YLrf4kyndmv88Aq8JVTeA==
=9F/T
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.6
The rest of the updates for v6.6, some of the highlights include:
- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.
Test different variations of single-stepping into interrupts:
- SVC and PGM interrupts;
- Interrupts generated by ISKE;
- Interrupts generated by instructions emulated by KVM;
- Interrupts generated by instructions emulated by userspace.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20230725143857.228626-7-iii@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
[frankja@de.igm.com: s/ASSERT_EQ/TEST_ASSERT_EQ/ because function was
renamed in the selftest printf series]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
If failed to set link1_1 to netns client, we should delete link1_1 in the
cleanup path. But if set link1_1 to netns client successfully, delete
link1_1 will report warning. So it will be safer creating directly the
devices in the target namespaces.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Closes: https://lore.kernel.org/all/ZNyJx1HtXaUzOkNA@Laptop-X1/
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZOjkTAAKCRDbK58LschI
gx32AP9gaaHFBtOYBfoenKTJfMgv1WhtQHIBas+WN9ItmBx9MAEA4gm/VyQ6oD7O
EBjJKJQ2CZ/QKw7cNacXw+l5jF7/+Q0=
=8P7g
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-08-25
We've added 87 non-merge commits during the last 8 day(s) which contain
a total of 104 files changed, 3719 insertions(+), 4212 deletions(-).
The main changes are:
1) Add multi uprobe BPF links for attaching multiple uprobes
and usdt probes, which is significantly faster and saves extra fds,
from Jiri Olsa.
2) Add support BPF cpu v4 instructions for arm64 JIT compiler,
from Xu Kuohai.
3) Add support BPF cpu v4 instructions for riscv64 JIT compiler,
from Pu Lehui.
4) Fix LWT BPF xmit hooks wrt their return values where propagating
the result from skb_do_redirect() would trigger a use-after-free,
from Yan Zhai.
5) Fix a BPF verifier issue related to bpf_kptr_xchg() with local kptr
where the map's value kptr type and locally allocated obj type
mismatch, from Yonghong Song.
6) Fix BPF verifier's check_func_arg_reg_off() function wrt graph
root/node which bypassed reg->off == 0 enforcement,
from Kumar Kartikeya Dwivedi.
7) Lift BPF verifier restriction in networking BPF programs to treat
comparison of packet pointers not as a pointer leak,
from Yafang Shao.
8) Remove unmaintained XDP BPF samples as they are maintained
in xdp-tools repository out of tree, from Toke Høiland-Jørgensen.
9) Batch of fixes for the tracing programs from BPF samples in order
to make them more libbpf-aware, from Daniel T. Lee.
10) Fix a libbpf signedness determination bug in the CO-RE relocation
handling logic, from Andrii Nakryiko.
11) Extend libbpf to support CO-RE kfunc relocations. Also follow-up
fixes for bpf_refcount shared ownership implementation,
both from Dave Marchevsky.
12) Add a new bpf_object__unpin() API function to libbpf,
from Daniel Xu.
13) Fix a memory leak in libbpf to also free btf_vmlinux
when the bpf_object gets closed, from Hao Luo.
14) Small error output improvements to test_bpf module, from Helge Deller.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (87 commits)
selftests/bpf: Add tests for rbtree API interaction in sleepable progs
bpf: Allow bpf_spin_{lock,unlock} in sleepable progs
bpf: Consider non-owning refs to refcounted nodes RCU protected
bpf: Reenable bpf_refcount_acquire
bpf: Use bpf_mem_free_rcu when bpf_obj_dropping refcounted nodes
bpf: Consider non-owning refs trusted
bpf: Ensure kptr_struct_meta is non-NULL for collection insert and refcount_acquire
selftests/bpf: Enable cpu v4 tests for RV64
riscv, bpf: Support unconditional bswap insn
riscv, bpf: Support signed div/mod insns
riscv, bpf: Support 32-bit offset jmp insn
riscv, bpf: Support sign-extension mov insns
riscv, bpf: Support sign-extension load insns
riscv, bpf: Fix missing exception handling and redundant zext for LDX_B/H/W
samples/bpf: Add note to README about the XDP utilities moved to xdp-tools
samples/bpf: Cleanup .gitignore
samples/bpf: Remove the xdp_sample_pkts utility
samples/bpf: Remove the xdp1 and xdp2 utilities
samples/bpf: Remove the xdp_rxq_info utility
samples/bpf: Remove the xdp_redirect* utilities
...
====================
Link: https://lore.kernel.org/r/20230825194319.12727-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
or aren't considered suitable for a -stable backport.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZOjuGgAKCRDdBJ7gKXxA
jkLlAQDY9sYxhQZp1PFLirUIPeOBjEyifVy6L6gCfk9j0snLggEA2iK+EtuJt2Dc
SlMfoTq29zyU/YgfKKwZEVKtPJZOHQU=
=oTcj
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"18 hotfixes. 13 are cc:stable and the remainder pertain to post-6.4
issues or aren't considered suitable for a -stable backport"
* tag 'mm-hotfixes-stable-2023-08-25-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
shmem: fix smaps BUG sleeping while atomic
selftests: cachestat: catch failing fsync test on tmpfs
selftests: cachestat: test for cachestat availability
maple_tree: disable mas_wr_append() when other readers are possible
madvise:madvise_free_pte_range(): don't use mapcount() against large folio for sharing check
madvise:madvise_free_huge_pmd(): don't use mapcount() against large folio for sharing check
madvise:madvise_cold_or_pageout_pte_range(): don't use mapcount() against large folio for sharing check
mm: multi-gen LRU: don't spin during memcg release
mm: memory-failure: fix unexpected return value in soft_offline_page()
radix tree: remove unused variable
mm: add a call to flush_cache_vmap() in vmap_pfn()
selftests/mm: FOLL_LONGTERM need to be updated to 0x100
nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
mm/gup: handle cont-PTE hugetlb pages correctly in gup_must_unshare() via GUP-fast
selftests: cgroup: fix test_kmem_basic less than error
mm: enable page walking API to lock vmas during the walk
smaps: use vm_normal_page_pmd() instead of follow_trans_huge_pmd()
mm/gup: reintroduce FOLL_NUMA as FOLL_HONOR_NUMA_FAULT
Confirm that the following sleepable prog states fail verification:
* bpf_rcu_read_unlock before bpf_spin_unlock
* RCU CS will last at least as long as spin_lock CS
Also confirm that correct usage passes verification, specifically:
* Explicit use of bpf_rcu_read_{lock, unlock} in sleepable test prog
* Implied RCU CS due to spin_lock CS
None of the selftest progs actually attach to bpf_testmod's
bpf_testmod_test_read.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230821193311.3290257-8-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Now that all reported issues are fixed, bpf_refcount_acquire can be
turned back on. Also reenable all bpf_refcount-related tests which were
disabled.
This a revert of:
* commit f3514a5d67 ("selftests/bpf: Disable newly-added 'owner' field test until refcount re-enabled")
* commit 7deca5eae8 ("bpf: Disable bpf_refcount_acquire kfunc calls until race conditions are fixed")
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230821193311.3290257-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Explicitly set the exception vector to #UD when potentially injecting an
exception in sync_regs_test's subtests that try to detect TOCTOU bugs
in KVM's handling of exceptions injected by userspace. A side effect of
the original KVM bug was that KVM would clear the vector, but relying on
KVM to clear the vector (i.e. make it #DE) makes it less likely that the
test would ever find *new* KVM bugs, e.g. because only the first iteration
would run with a legal vector to start.
Explicitly inject #UD for race_events_inj_pen() as well, e.g. so that it
doesn't inherit the illegal 255 vector from race_events_exc(), which
currently runs first.
Link: https://lore.kernel.org/r/20230817233430.1416463-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reload known good vCPU state if the vCPU triple faults in any of the
race_sync_regs() subtests, e.g. if KVM successfully injects an exception
(the vCPU isn't configured to handle exceptions). On Intel, the VMCS
is preserved even after shutdown, but AMD's APM states that the VMCB is
undefined after a shutdown and so KVM synthesizes an INIT to sanitize
vCPU/VMCB state, e.g. to guard against running with a garbage VMCB.
The synthetic INIT results in the vCPU never exiting to userspace, as it
gets put into Real Mode at the reset vector, which is full of zeros (as is
GPA 0 and beyond), and so executes ADD for a very, very long time.
Fixes: 60c4063b47 ("KVM: selftests: Extend x86's sync_regs_test to check for event vector races")
Cc: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20230817233430.1416463-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
* for-next/selftests: (22 commits)
kselftest/arm64: Fix hwcaps selftest build
kselftest/arm64: add jscvt feature to hwcap test
kselftest/arm64: add pmull feature to hwcap test
kselftest/arm64: add AES feature check to hwcap test
kselftest/arm64: add SHA1 and related features to hwcap test
kselftest/arm64: build BTI tests in output directory
kselftest/arm64: fix a memleak in zt_regs_run()
kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
kselftest/arm64: add lse and lse2 features to hwcap test
kselftest/arm64: add test item that support to capturing the SIGBUS signal
kselftest/arm64: add DEF_SIGHANDLER_FUNC() and DEF_INST_RAISE_SIG() helpers
kselftest/arm64: add crc32 feature to hwcap test
kselftest/arm64: add float-point feature to hwcap test
kselftest/arm64: Use the tools/include compiler.h rather than our own
kselftest/arm64: Use shared OPTIMZER_HIDE_VAR() definiton
kselftest/arm64: Make the tools/include headers available
tools include: Add some common function attributes
tools compiler.h: Add OPTIMIZER_HIDE_VAR()
kselftest/arm64: Exit streaming mode after collecting signal context
kselftest/arm64: add RCpc load-acquire to hwcap test
...
- Fix ring buffer being permanently disabled due to missed record_disabled()
Changing the trace cpu mask will disable the ring buffers for the CPUs no
longer in the mask. But it fails to update the snapshot buffer. If a snapshot
takes place, the accounting for the ring buffer being disabled is corrupted
and this can lead to the ring buffer being permanently disabled.
- Add test case for snapshot and cpu mask working together
- Fix memleak by the function graph tracer not getting closed properly.
The iterator is used to read the ring buffer. When it opens, it calls
the open function of a tracer, and when it is closed, it calls the close
iteration. While a trace is being read, it is still possible to change
the tracer. If this happens between the function graph tracer and the
wakeup tracer (which uses function graph tracing), the tracers are not
closed properly during when the iterator sees the switch, and the wakeup
function did not initialize its private pointer to NULL, which is used
to know if the function graph tracer was the last tracer. It could be
fooled in thinking it is, but then on exit it does not call the close
function of the function graph tracer to clean up its data.
- Fix synthetic events on big endian machines, by introducing a union
that does the conversions properly.
- Fix synthetic events from printing out the number of elements in the
stacktrace when it shouldn't.
- Fix synthetic events stacktrace to not print a bogus value at the end.
- Introduce a pipe_cpumask that prevents the trace_pipe files from being
opened by more than one task (file descriptor). There was a race found
where if splice is called, the iter->ent could become stale and events
could be missed. There's no point reading a producer/consumer file by
more than one task as they will corrupt each other anyway. Add a cpumask
that keeps track of the per_cpu trace_pipe files as well as the global
trace_pipe file that prevents more than one open of a trace_pipe file
that represents the same ring buffer. This prevents the race from
happening.
- Fix ftrace samples for arm64 to work with older compilers.
-----BEGIN PGP SIGNATURE-----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=CI9f
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix ring buffer being permanently disabled due to missed
record_disabled()
Changing the trace cpu mask will disable the ring buffers for the
CPUs no longer in the mask. But it fails to update the snapshot
buffer. If a snapshot takes place, the accounting for the ring buffer
being disabled is corrupted and this can lead to the ring buffer
being permanently disabled.
- Add test case for snapshot and cpu mask working together
- Fix memleak by the function graph tracer not getting closed properly.
The iterator is used to read the ring buffer. When it opens, it calls
the open function of a tracer, and when it is closed, it calls the
close iteration. While a trace is being read, it is still possible to
change the tracer.
If this happens between the function graph tracer and the wakeup
tracer (which uses function graph tracing), the tracers are not
closed properly during when the iterator sees the switch, and the
wakeup function did not initialize its private pointer to NULL, which
is used to know if the function graph tracer was the last tracer. It
could be fooled in thinking it is, but then on exit it does not call
the close function of the function graph tracer to clean up its data.
- Fix synthetic events on big endian machines, by introducing a union
that does the conversions properly.
- Fix synthetic events from printing out the number of elements in the
stacktrace when it shouldn't.
- Fix synthetic events stacktrace to not print a bogus value at the
end.
- Introduce a pipe_cpumask that prevents the trace_pipe files from
being opened by more than one task (file descriptor).
There was a race found where if splice is called, the iter->ent could
become stale and events could be missed. There's no point reading a
producer/consumer file by more than one task as they will corrupt
each other anyway. Add a cpumask that keeps track of the per_cpu
trace_pipe files as well as the global trace_pipe file that prevents
more than one open of a trace_pipe file that represents the same ring
buffer. This prevents the race from happening.
- Fix ftrace samples for arm64 to work with older compilers.
* tag 'trace-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
samples: ftrace: Replace bti assembly with hint for older compiler
tracing: Introduce pipe_cpumask to avoid race on trace_pipes
tracing: Fix memleak due to race between current_tracer and trace
tracing/synthetic: Allocate one additional element for size
tracing/synthetic: Skip first entry for stack traces
tracing/synthetic: Use union instead of casts
selftests/ftrace: Add a basic testcase for snapshot
tracing: Fix cpu buffers unavailable due to 'record_disabled' missed
Remove comparing pointer to 0 to avoid this warning from coccinelle:
./tools/testing/selftests/mm/map_populate.c:80:16-17: WARNING comparing pointer to 0, suggest !E
./tools/testing/selftests/mm/map_populate.c:80:16-17: WARNING comparing pointer to 0
Link: https://lkml.kernel.org/r/20230817160033.90079-1-tuananhlfc@gmail.com
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, not all kernel memory usage is being accounted for. This
commit switches to using the kernel entry within memory.stat which
already includes kernel_stack, pagetables, and slab. The kernel entry
also includes vmalloc and other additional kernel memory use cases which
were missing.
Link: https://lkml.kernel.org/r/bvrhe2tpsts2azaroq4ubp2slawmop6orndsswrewuscw3ugvk@kmemmrttsnc7
Signed-off-by: Lucas Karpinski <lkarpins@redhat.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "New page table range API", v6.
This patchset changes the API used by the MM to set up page table entries.
The four APIs are:
set_ptes(mm, addr, ptep, pte, nr)
update_mmu_cache_range(vma, addr, ptep, nr)
flush_dcache_folio(folio)
flush_icache_pages(vma, page, nr)
flush_dcache_folio() isn't technically new, but no architecture
implemented it, so I've done that for them. The old APIs remain around
but are mostly implemented by calling the new interfaces.
The new APIs are based around setting up N page table entries at once.
The N entries belong to the same PMD, the same folio and the same VMA, so
ptep++ is a legitimate operation, and locking is taken care of for you.
Some architectures can do a better job of it than just a loop, but I have
hesitated to make too deep a change to architectures I don't understand
well.
One thing I have changed in every architecture is that PG_arch_1 is now a
per-folio bit instead of a per-page bit when used for dcache clean/dirty
tracking. This was something that would have to happen eventually, and it
makes sense to do it now rather than iterate over every page involved in a
cache flush and figure out if it needs to happen.
The point of all this is better performance, and Fengwei Yin has measured
improvement on x86. I suspect you'll see improvement on your architecture
too. Try the new will-it-scale test mentioned here:
https://lore.kernel.org/linux-mm/20230206140639.538867-5-fengwei.yin@intel.com/
You'll need to run it on an XFS filesystem and have
CONFIG_TRANSPARENT_HUGEPAGE set.
This patchset is the basis for much of the anonymous large folio work
being done by Ryan, so it's received quite a lot of testing over the last
few months.
This patch (of 38):
Determine if a value lies within a range more efficiently (subtraction +
comparison vs two comparisons and an AND). It also has useful (under some
circumstances) behaviour if the range exceeds the maximum value of the
type. Convert all the conflicting definitions of in_range() within the
kernel; some can use the generic definition while others need their own
definition.
Link: https://lkml.kernel.org/r/20230802151406.3735276-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230802151406.3735276-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The cachestat kselftest runs a test on a normal file, which is created
temporarily in the current directory. Among the tests it runs there is a
call to fsync(), which is expected to clean all dirty pages used by the
file.
However the tmpfs filesystem implements fsync() as noop_fsync(), so the
call will not even attempt to clean anything when this test file happens
to live on a tmpfs instance. This happens in an initramfs, or when the
current directory is in /dev/shm or sometimes /tmp.
To avoid this test failing wrongly, use statfs() to check which filesystem
the test file lives on. If that is "tmpfs", we skip the fsync() test.
Since the fsync test is only one part of the "normal file" test, we now
execute this twice, skipping the fsync part on the first call. This way
only the second test, including the fsync part, would be skipped.
Link: https://lkml.kernel.org/r/20230821160534.3414911-3-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests: cachestat: fix run on older kernels", v2.
I ran all kernel selftests on some test machine, and stumbled upon
cachestat failing (among others). These patches fix the run on older
kernels and when the current directory is on a tmpfs instance.
This patch (of 2):
As cachestat is a new syscall, it won't be available on older kernels, for
instance those running on a development machine. At the moment the test
reports all tests as "not ok" in this case.
Test for the cachestat syscall availability first, before doing further
tests, and bail out early with a TAP SKIP comment.
This also uses the opportunity to add the proper TAP headers, and add one
check for proper error handling (illegal file descriptor).
Link: https://lkml.kernel.org/r/20230821160534.3414911-1-andre.przywara@arm.com
Link: https://lkml.kernel.org/r/20230821160534.3414911-2-andre.przywara@arm.com
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Enable cpu v4 tests for RV64, and the relevant tests have passed.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/r/20230824095001.3408573-8-pulehui@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test the basic locking stuff on 2 fds: multiple read locks,
conflicts between read and write locks, use of len==0 for queries.
Also tests for F_UNLCK F_OFD_GETLK extension.
[ jlayton: fix unlink() pathname in selftest ]
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Cc: linux-api@vger.kernel.org
Signed-off-by: Stas Sergeev <stsp2@yandex.ru>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Add a new testing topo bond_topo_2d1c.sh which is used more commonly.
Make bond_topo_3d1c.sh just source bond_topo_2d1c.sh and add the
extra link.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It seems like it was forgotten to add uprobe_multi binary to .gitignore.
Fix this trivial omission.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230824000016.2658017-1-andrii@kernel.org
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add tests that enforce mmap hint address behavior. mmap should default
to sv48. mmap will provide an address at the highest address space that
can fit into the hint address, unless the hint address is less than sv39
and not 0, then it will return a sv39 address.
These tests are split into two files: mmap_default.c and mmap_bottomup.c
because a new process must be exec'd in order to change the mmap layout.
The run_mmap.sh script sets the stack to be unlimited for the
mmap_bottomup.c test which triggers a bottomup layout.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20230809232218.849726-3-charlie@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
libc-test is mainly added to compare the behavior of nolibc to the
system libc, it is meaningless and error-prone with cross compiling.
Let's use HOSTCC instead of CC to avoid wrongly use cross compiler when
CROSS_COMPILE is passed or customized.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Fixes: cfb672f94f ("selftests/nolibc: add run-libc-test target")
Signed-off-by: Willy Tarreau <w@1wt.eu>
After the tests finish, it is valuable to report and summarize with
existing test log.
This avoid rerun or run the tests again when not necessary.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc64 variant for big endian 64-bit PowerPC, users can pass XARCH=ppc64
to test it.
The powernv machine of qemu-system-ppc64 is used with
powernv_be_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the
OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be
used as an hypervisor OS, running KVM guests, or simply as a host OS.
Notes,
- differs from little endian 64-bit PowerPC, vmlinux is used instead of
zImage, because big endian zImage [2] only boot on qemu with x-vof=on
(added from qemu v7.0) and a fixup patch [3] for qemu v7.0.51:
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- as 'man gcc' shows, '-mmultiple' is used to generate code that uses
the load multiple word instructions and the store multiple word
instructions. Those instructions do not work when the processor is in
little-endian mode (except PPC740/PPC750), so, we only enable it
for big endian powerpc.
- for big endian ppc64, as the help message from arch/powerpc/Kconfig
shows, the V2 ABI is standard for 64-bit little-endian, but for
big-endian it is less well tested by kernel and toolchain, so, use
elfv1 as-is, no need to explicitly ask toolchain to use elfv2 here.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
[2]: https://github.com/linuxppc/issues/issues/402
[3]: https://lore.kernel.org/qemu-devel/20220504065536.3534488-1-aik@ozlabs.ru/
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230722121019.GD17311@1wt.eu/
Link: https://lore.kernel.org/lkml/20230719043353.GC5331@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc64le variant for little endian 64-bit PowerPC, users can pass
XARCH=ppc64le to test it.
The powernv machine of qemu-system-ppc64le is used for there is just a
working powernv_defconfig.
As the document [1] shows:
PowerNV (as Non-Virtualized) is the “bare metal” platform using the
OPAL firmware. It runs Linux on IBM and OpenPOWER systems and it can be
used as an hypervisor OS, running KVM guests, or simply as a host OS.
Notes,
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- little endian ppc64 prefers elfv2 to elfv1 if the toolchain (e.g. gcc
13.1.0) supports it, let's align with kernel, otherwise, our elfv1
binary will not run on kernel with elfv2 ABI.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powernv.html
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230722120747.GC17311@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Kernel uses ARCH=powerpc for both 32-bit and 64-bit PowerPC, here adds a
ppc variant for 32-bit PowerPC and uses it as the default variant of
powerpc architecture.
Users can pass XARCH=ppc (or ARCH=powerpc) to test 32-bit PowerPC.
The default qemu-system-ppc g3beige machine [1] is used to run 32-bit
powerpc kernel with pmac32_defconfig. The missing PMACZILOG serial tty
and console are enabled in another patch [2].
Note,
- zImage doesn't boot due to "qemu-system-ppc: Some ROM regions are
overlapping" error, so, vmlinux is used instead.
- since the VSX support may be disabled in kernel side, to avoid
"illegal instruction" errors due to missing VSX kernel support, let's
simply let compiler not generate vector/scalar (VSX) instructions via
the '-mno-vsx' option.
- as 'man gcc' shows, '-mmultiple' is used to generate code that uses
the load multiple word instructions and the store multiple word
instructions. Those instructions do not work when the processor is in
little-endian mode (except PPC740/PPC750), so, we only enable it
for big endian powerpc.
[1]: https://qemu.readthedocs.io/en/latest/system/ppc/powermac.html
[2]: https://lore.kernel.org/lkml/bb7b5f9958b3e3a20f6573ff7ce7c5dc566e7e32.1690982937.git.tanyuan@tinylab.org/
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/ZL9leVOI25S2+0+g@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Most of the CPU architectures have different variants, but kernel
usually only accepts parts of them via the ARCH variable, the others
should be customized via kernel config files.
To simplify testing, a new XARCH variable is added to extend the
kernel's ARCH with a few variants of the same architecture, and it is
used to customize variant specific variables, at last XARCH is converted
to the kernel's ARCH:
e.g. make run XARCH=<one of the supported variants>
| \
| `-> variant specific variables:
| IMAGE, DEFCONFIG, QEMU_ARCH, QEMU_ARGS, CFLAGS ...
\
`---> kernel's ARCH
XARCH and ARCH are carefully mapped to allow users to pass architecture
variants via XARCH or pass architecture via ARCH from cmdline.
PowerPC is the first user and also a very good reference architecture of
this mapping, it has variants with different combinations of
32-bit/64-bit and bit endian/little endian.
To use this mapping, the other architectures can refer to PowerPC, If
the target architecture only has one variant, XARCH is simply an alias
of ARCH, no additional mapping required.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702171715.GD16233@1wt.eu/
Link: https://lore.kernel.org/lkml/20230730061801.GA7690@1wt.eu/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It will help the developers to avoid cruft and detect some bugs.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Binary size is not important for nolibc-test and some debugging
information is nice to have, so don't strip the binary during linking.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
If read() fails and returns -1 (or returns garbage for some other
reason) buf would be accessed out of bounds.
Only use the return value of read() after it has been validated.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Avoid truncating values before comparing them.
As printf in nolibc doesn't support ssize_t add casts to int for
printing.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
These warnings will be enabled later so avoid triggering them.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This warning will be enabled later so avoid triggering it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
This allows the compiler to generate warnings if they go unused.
Functions that are supposed to be used as breakpoints should not be
static, so un-statify those if necessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Recent fix ceb528feb7 ("selftests/nolibc: avoid gaps in test numbers")
had the annoying side effect of always returning skipped tests, which
are normally supposed to happen only when certain features are missing
to run the test (missing kernel options, toolchain not supporting
stack-protector etc). As such there are now always warnings. Let's
modify the test to not use the condition and instead use a ternary
expression to check the result.
Fixes: ceb528feb7 ("selftests/nolibc: avoid gaps in test numbers")
Cc: Thomas WeiÃ<9F>schuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It's documented as returning int which is also implemented by glibc and
musl, so adopt that return type.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Add a test case of pipe that sends and receives message in a single
process.
Suggested-by: Thomas Weißschuh <thomas@t-8ch.de>
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/all/c5de2d13-3752-4e1b-90d9-f58cca99c702@t-8ch.de/
Signed-off-by: Yuan Tan <tanyuan@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
[wt: fixed the "len" type to size_t to address a sign-compare warning
with upcoming patches]
Signed-off-by: Willy Tarreau <w@1wt.eu>
The other tests use 1 as failure, mmap_munmap_good uses -1 as failure,
let's fix up this.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
If the test description is longer than the status alignment the
parameter 'n' to putcharn() would lead to a signed underflow that then
gets converted to a very large unsigned value.
This in turn leads out-of-bound writes in memset() crashing the
application.
The failure case of EXPECT_PTRER() used in "mmap_bad" exhibits this
exact behavior.
Fixes: 29f5540be3 ("selftests/nolibc: add EXPECT_PTREQ, EXPECT_PTRNE and EXPECT_PTRER")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As the head comment of nolibc-test.c shows, it can be built in 3 ways:
$(CC) -nostdlib -include /path/to/nolibc.h => NOLIBC already defined
$(CC) -nostdlib -I/path/to/nolibc/sysroot => _NOLIBC_* guards are present
$(CC) with default libc => NOLIBC* never defined
Only last two of them are tested currently, let's allow test the first one too.
This may help to find issues about using nolibc.h to build programs. it
derives from this change:
commit 3a8039e289 ("tools/nolibc: Fix build of stdio.h due to header ordering")
Usage:
// test with sysroot by default
$ make run-user
// test without sysroot, using nolibc.h directly
$ make run-user NOLIBC_SYSROOT=0
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
It is able to run nolibc-test directly without qemu-user when the target
machine is the same as the host machine.
Sometimes, the result running locally may help a lot when the qemu-user
package is too old.
When the target machine differs from the host machine, it is also able
to run nolibc-test directly with qemu-user-static + binfmt_misc.
Link: https://lore.kernel.org/lkml/ZKutZwIOfy5MqedG@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The startup code is critical to get the right argc, argv, envp/environ
and _auxv, let's add a startup test group and the corresponding
testcases.
The "environ" test case is also moved from the stdlib test group to this
new startup test group and it is renamed to "environ_envp".
Since argv0 has been used by many other test cases, let's add testcases
to gurantee it too.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
4 new pointer compare macros are added, they are similar to the integer
compare macros.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As the test numbers are based on line numbers gaps without testcases are
to be avoided.
Instead use the already existing test condition logic to implement
conditional execution.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
pad_spc() is only ever used to print the status message of testcases.
The line size is always constant, the return value is never used and the
format string is never used as such.
Remove all the unneeded logic and simplify the API and its users.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
If "cond" is a multi-token statement the behavior of the preprocessor
will lead to the negation "!" to be only applied to the first token.
Although currently no test uses such multi-token conditions but it can
happen at any time.
Put braces around "cond" to ensure the negation works as expected.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
In commit 52e423f5b9 ("tools/nolibc: export environ as a weak symbol on i386")
and friends the asm startup logic was extended to directly populate the
"environ" array.
This makes it impossible for "environ" to be dropped by the linker.
Therefore also drop the other logic to handle non-present "environ".
Also add a testcase to validate the initialization of environ.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
a newline is inserted just before the test failures to avoid mixing the
test failures with the raw test log.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
two newlines are added around the test summary line to extrude the test
status.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
align the test values for different runs and different architectures.
Since the total number of tests is not bigger than 1000 currently, let's
align them with "%3d".
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
[wt: s/%03d/%3d/ as discussed with Zhangjin]
Link: https://lore.kernel.org/lkml/20230709185112.97236-1-falcon@tinylab.org/
Signed-off-by: Willy Tarreau <w@1wt.eu>
Let's count and print the total number of tests, now, the data of
passed, skipped and failed have the same format.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
one of the test status: success, warning and failure is printed to
summarize the passed, skipped and failed values.
- "success" means no skipped and no failed.
- "warning" means has at least one skipped and no failed.
- "failure" means all tests are failed.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702164358.GB16233@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
argv0 is readable and chmodable, let's use it for chmod test, but a safe
umask should be used, the readable and executable modes should be
reserved.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Since argv0 also works for CONFIG_PROC_FS=n, let's use it instead of
'/proc/self/exe'.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
'/proc/self/' is a good path which doesn't have stale time info but it
is only available for CONFIG_PROC_FS=y.
When CONFIG_PROC_FS=n, use argv0 instead of '/proc/self', use '/' for the
worst case.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The PWD environment variable has the path of the nolibc-test program,
the current path must be the same as it, otherwise, the test cases will
fail with relative path (e.g. ./nolibc-test).
Since only chdir_root really changes the current path, let's restore it
with the PWD environment variable.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The vfprintf test case require to open a temporary file to write, the
old memfd_create() method is perfect but has strong dependency on
MEMFD_CREATE and also TMPFS or HUGETLBFS (see fs/Kconfig):
config MEMFD_CREATE
def_bool TMPFS || HUGETLBFS
And from v6.2, MFD_NOEXEC_SEAL must be passed for the non-executable
memfd, otherwise, The kernel warning will be output to the test result
like this:
Running test 'vfprintf'
0 emptymemfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'init'
"" = "" [OK]
To avoid such warning and also to remove the MEMFD_CREATE dependency,
let's open a file from tmpfs directly.
The /tmp directory is used to detect the existing of tmpfs, if not
there, skip instead of fail.
And further, for pid == 1, the initramfs is loaded as ramfs, which can
be used as tmpfs, so, it is able to further remove TMPFS dependency too.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/9ad51430-b7c0-47dc-80af-20c86539498d@t-8ch.de
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
create a /tmp directory. If it succeeds, the directory is writable,
which is normally the case when booted from an initramfs anyway.
This will be used instead of procfs for some tests.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Link: https://lore.kernel.org/lkml/20230710050600.9697-1-falcon@tinylab.org/
[wt: removed the unneeded mount() call]
Signed-off-by: Willy Tarreau <w@1wt.eu>
For CONFIG_PROC_FS=n, the /proc is not mountable, but the /proc
directory has been created in the prepare() stage whenever /proc is
there or not.
so, the checking of /proc in the run_syscall() stage will be always true
and at last it will fail all of the procfs dependent test cases, which
deviates from the 'cond' check design of the EXPECT_xx macros, without
procfs, these test cases should be skipped instead of failed.
To solve this issue, one method is checking /proc/self instead of /proc,
another method is removing the /proc directory completely for
CONFIG_PROC_FS=n, we apply the second method to avoid misleading the
users.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
A new rmdir_blah test case is added to remove a non-existing /blah,
which expects failure with ENOENT errno.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
For CONFIG_NET=n, there would be no /proc/self/net, so, use
/proc/self/cmdline instead.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
kernel parameters allow pass two types of strings, one type is like
'noapic', another type is like 'panic=5', the first type is passed as
arguments of the init program, the second type is passed as environment
variables of the init program.
when users pass kernel parameters like this:
noapic NOLIBC_TEST=syscall
our nolibc-test program will use the test setting from argv[1] and
ignore the one from NOLIBC_TEST environment variable, and at last, it
will print the following line and ignore the whole test setting.
Ignoring unknown test name 'noapic'
reversing the parsing order does solve the above issue:
test = getenv("NOLIBC_TEST");
if (test)
test = argv[1];
but it still doesn't work with such kernel parameters (without
NOLIBC_TEST environment variable):
noapic FOO=bar
To support all of the potential kernel parameters, let's verify the test
setting from both of argv[1] and NOLIBC_TEST environment variable.
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Since both glibc and musl provide RB_ flags via <sys/reboot.h>, and we
just add RB_ flags for nolibc, let's use RB_ flags instead of
LINUX_REBOOT_ flags and only reserve the required <sys/reboot.h> header.
This allows compile libc-test for musl libc without the linux headers.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
musl limits the fast signed int in 32bit, but glibc and nolibc don't, to
let such test cases work on musl, let's provide the type based
SINT_MAX_OF_TYPE(type) and SINT_MIN_OF_TYPE(type).
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/bc635c4f-67fe-4e86-bfdf-bcb4879b928d@t-8ch.de/
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
_GNU_SOURCE Implies _LARGEFILE64_SOURCE in glibc, but in musl, the
default configuration doesn't enable _LARGEFILE64_SOURCE.
>From include/dirent.h of musl, getdents64 is provided as getdents when
_LARGEFILE64_SOURCE is defined.
#if defined(_LARGEFILE64_SOURCE)
...
#define getdents64 getdents
#endif
Let's define _LARGEFILE64_SOURCE to fix up this compile error:
tools/testing/selftests/nolibc/nolibc-test.c: In function ‘test_getdents64’:
tools/testing/selftests/nolibc/nolibc-test.c:453:8: warning: implicit declaration of function ‘getdents64’; did you mean ‘getdents’? [-Wimplicit-function-declaration]
453 | ret = getdents64(fd, (void *)buffer, sizeof(buffer));
| ^~~~~~~~~~
| getdents
/usr/bin/ld: /tmp/ccKILm5u.o: in function `test_getdents64':
nolibc-test.c:(.text+0xe3e): undefined reference to `getdents64'
collect2: error: ld returned 1 exit status
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
As the gettid manpage [1] shows, glibc 2.30 has gettid support, so,
let's enable the test for glibc >= 2.30.
gettid works on musl too.
[1]: https://man7.org/linux/man-pages/man2/gettid.2.html
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
mmap() a file with a good offset and then munmap() it. a non-zero offset
is passed to test the 6th argument of my_syscall6().
Note, it is not easy to find a unique file for mmap() in different
scenes, so, a file list is used to search the right one:
- /dev/zero: is commonly used to allocate anonymous memory and is likely
present and readable
- /proc/1/exe: for 'run' and 'run-user' target, 'run-user' can not find
'/proc/self/exe'
- /proc/self/exe: for 'libc-test' target, normal program 'libc-test' has
no permission to access '/proc/1/exe'
- argv0: the path of the program itself, let it pass even with worst
case scene: no procfs and no /dev/zero
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702193306.GK16233@1wt.eu/
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/bff82ea6-610b-4471-a28b-6c76c28604a6@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The addr argument of munmap() must be a multiple of the page size,
passing invalid (void *)1 addr expects failure with -EINVAL.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The length argument of mmap() must be greater than 0, passing a zero
length argument expects failure with -EINVAL.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
>From musl 0.9.14 (to the latest version 1.2.3), both sbrk() and brk()
have almost been disabled for they conflict with malloc, only sbrk(0) is
still permitted as a way to get the current location of the program
break, let's support such case.
EXPECT_PTRNE() is used to expect sbrk() always successfully getting the
current break.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
The syscalls like sbrk() and mmap() return pointers, to test them, more
pointer compare test macros are required, add them:
- EXPECT_PTREQ() expects two equal pointers.
- EXPECT_PTRNE() expects two non-equal pointers.
- EXPECT_PTRER() expects failure with a specified errno.
- EXPECT_PTRER2() expects failure with one of two specified errnos.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
/dev/zero is commonly used to allocate anonymous memory, it is a very
good file for tests, let's prepare it.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/20230702193306.GK16233@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
argv0 is the path to nolibc-test program itself, which is a very good
always existing readable file for some tests, let's export it.
Note, the path may be absolute or relative, please make sure the tests
work with both of them. If it is relative, we must make sure the current
path is the one specified by the PWD environment variable.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/lkml/ZKKbS3cwKcHgnGwu@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Since commit 53fcfafa8c ("tools/nolibc/unistd: add syscall()") nolibc
has support for syscall(2).
Use it to get rid of some ifdef-ery.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Add test cases for accessing the data structure fields using BTF info.
This includes the field access from parameters and retval, and accessing
string information.
Link: https://lore.kernel.org/all/169272161265.160970.14048619786574971276.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Assume the fprobe event is a return event if there is $retval is
used in the probe's argument without %return. e.g.
echo 'f:myevent vfs_read $retval' >> dynamic_events
then 'myevent' is a return probe event.
Link: https://lore.kernel.org/all/169272160261.160970.13613040161560998787.stgit@devnote2/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Add a selftest for the fix provided in the previous commit. Without the
fix, the selftest passes the verifier while it should fail. The special
logic for detecting graph root or node for reg->off and bypassing
reg->off == 0 guarantee for release helpers/kfuncs has been dropped.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822175140.1317749-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For a bpf_kptr_xchg() with local kptr, if the map value kptr type and
allocated local obj type does not match, with the previous patch,
the below verifier error message will be logged:
R2 is of type <allocated local obj type> but <map value kptr type> is expected
Without the previous patch, the test will have unexpected success.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20230822050058.2887354-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Before adding a port to bond, it need to be set down first. In the
lacpdu test the author set the port down specifically. But commit
a4abfa627c ("net: rtnetlink: Enslave device before bringing it up")
changed the operation order, the kernel will set the port down _after_
adding to bond. So all the ports will be down at last and the test failed.
In fact, the veth interfaces are already inactive when added. This
means there's no need to set them down again before adding to the bond.
Let's just remove the link down operation.
Fixes: a4abfa627c ("net: rtnetlink: Enslave device before bringing it up")
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Closes: https://lore.kernel.org/netdev/a0ef07c7-91b0-94bd-240d-944a330fcabd@huawei.com/
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230817082459.1685972-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Attaching extra program to same functions system wide for api
and link tests.
This way we can test the pid filter works properly when there's
extra system wide consumer on the same uprobe that will trigger
the original uprobe handler.
We expect to have the same counts as before.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-29-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Running api and link tests also with pid filter and checking
the probe gets executed only for specific pid.
Spawning extra process to trigger attached uprobes and checking
we get correct counts from executed programs.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-28-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test for cookies setup/retrieval in uprobe_link uprobes
and making sure bpf_get_attach_cookie works properly.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-27-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that attaches 50k usdt probes in usdt_multi binary.
After the attach is done we run the binary and make sure we get
proper amount of hits.
With current uprobes:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
1353.659680562 seconds time elapsed
With uprobe_multi link:
# perf stat --null ./test_progs -n 254/6
#254/6 uprobe_multi_test/bench_usdt:OK
#254 uprobe_multi_test:OK
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Performance counter stats for './test_progs -n 254/6':
0.322046364 seconds time elapsed
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-26-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding code in uprobe_multi test binary that defines 50k usdts
and will serve as attach point for uprobe_multi usdt bench test
in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-25-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that attaches 50k uprobes in uprobe_multi binary.
After the attach is done we run the binary and make sure we
get proper amount of hits.
The resulting attach/detach times on my setup:
test_bench_attach_uprobe:PASS:uprobe_multi__open 0 nsec
test_bench_attach_uprobe:PASS:uprobe_multi__attach 0 nsec
test_bench_attach_uprobe:PASS:uprobes_count 0 nsec
test_bench_attach_uprobe: attached in 0.346s
test_bench_attach_uprobe: detached in 0.419s
#262/5 uprobe_multi_test/bench_uprobe:OK
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-24-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test program that defines 50k uprobe_multi_func_*
functions and will serve as attach point for uprobe_multi bench test
in following patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-23-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for bpf_link_create attach function.
Testing attachment using the struct bpf_link_create_opts.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-22-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for bpf_program__attach_uprobe_multi
attach function.
Testing attachment using glob patterns and via bpf_uprobe_multi_opts
paths/syms fields.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-21-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding uprobe_multi test for skeleton load/attach functions,
to test skeleton auto attach for uprobe_multi link.
Test that bpf_get_func_ip works properly for uprobe_multi
attachment.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-20-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We'd like to have single copy of get_time_ns used b bench and test_progs,
but we can't just include bench.h, because of conflicting 'struct env'
objects.
Moving get_time_ns to testing_helpers.h which is being included by both
bench and test_progs objects.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230809083440.3209381-19-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Let's test whether merging and unmerging in PROT_NONE areas works as
expected.
Pass a page protection to mmap_and_merge_range(), which will trigger
an mprotect() after writing to the pages, but before enabling merging.
Make sure that unsharing works as expected, by performing a ptrace write
(using /proc/self/mem) and by setting MADV_UNMERGEABLE.
Note that this implicitly tests that ptrace writes in an inaccessible
(PROT_NONE) mapping work as expected.
[david@redhat.com: use sizeof(i) in test_prot_none(), per Peter]
Link: https://lkml.kernel.org/r/e9cdb144-70c7-6596-2377-e675635c94e0@redhat.com
Link: https://lkml.kernel.org/r/20230803143208.383663-8-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: liubo <liubo254@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's extend mmap_and_merge_range() to test if anything in the current
process was merged. range_maps_duplicates() is too unreliable for that
use case, so instead look at KSM stats.
Trigger a complete unmerge first, to cleanup the stable tree and
stabilize accounting of merged pages.
Note that we're using /proc/self/ksm_merging_pages instead of
/proc/self/ksm_stat, because that one is available in more existing
kernels.
If /proc/self/ksm_merging_pages can't be opened, we can't perform any
checks and simply skip them.
We have to special-case the shared zeropage for now. But the only user
-- test_unmerge_zero_pages() -- performs its own merge checks.
Link: https://lkml.kernel.org/r/20230803143208.383663-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: liubo <liubo254@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is only one Kconfig user of CONFIG_EMBEDDED and it can be switched
to EXPERT or "if !ARCH_MULTIPLATFORM" (suggested by Arnd).
Link: https://lkml.kernel.org/r/20230816055010.31534-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com> [RISC-V]
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: Russell King <linux@armlinux.org.uk>
Cc: Vineet Gupta <vgupta@kernel.org>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extract from current /proc/self/smaps output:
Swap: 0 kB
SwapPss: 0 kB
Locked: 0 kB
THPeligible: 0
ProtectionKey: 0
That's not the alignment shown in Documentation/filesystems/proc.rst: it's
an ugly artifact from missing out the %8 other fields are using; but
there's even one selftest which expects it to look that way. Hoping no
other smaps parsers depend on THPeligible to look so ugly, fix these.
Link: https://lkml.kernel.org/r/cfb81f7a-f448-5bc2-b0e1-8136fcd1dd8c@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This adds proper tests for the nesting functionality of vm.memfd_noexec as
well as some minor cleanups to spawn_*_thread().
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-5-7ff9e3e10ba6@cyphar.com
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Given the difficulty of auditing all of userspace to figure out whether
every memfd_create() user has switched to passing MFD_EXEC and
MFD_NOEXEC_SEAL flags, it seems far less distruptive to make it possible
for older programs that don't make use of executable memfds to run under
vm.memfd_noexec=2. Otherwise, a small dependency change can result in
spurious errors. For programs that don't use executable memfds, passing
MFD_NOEXEC_SEAL is functionally a no-op and thus having the same
In addition, every failure under vm.memfd_noexec=2 needs to print to the
kernel log so that userspace can figure out where the error came from.
The concerns about pr_warn_ratelimited() spam that caused the switch to
pr_warn_once()[1,2] do not apply to the vm.memfd_noexec=2 case.
This is a user-visible API change, but as it allows programs to do
something that would be blocked before, and the sysctl itself was broken
and recently released, it seems unlikely this will cause any issues.
[1]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/
[2]: https://lore.kernel.org/202212161233.85C9783FB@keescook/
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-2-7ff9e3e10ba6@cyphar.com
Fixes: 105ff5339f ("mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memfd: cleanups for vm.memfd_noexec", v2.
The most critical issue with vm.memfd_noexec=2 (the fact that passing
MFD_EXEC would bypass it entirely[1]) has been fixed in Andrew's
tree[2], but there are still some outstanding issues that need to be
addressed:
* vm.memfd_noexec=2 shouldn't reject old-style memfd_create(2) syscalls
because it will make it far to difficult to ever migrate. Instead it
should imply MFD_EXEC.
* The dmesg warnings are pr_warn_once(), which on most systems means
that they will be used up by systemd or some other boot process and
userspace developers will never see it.
- For the !(flags & (MFD_EXEC | MFD_NOEXEC_SEAL)) case, outputting a
rate-limited message to the kernel log is necessary to tell
userspace that they should add the new flags.
Arguably the most ideal way to deal with the spam concern[3,4]
while still prompting userspace to switch to the new flags would be
to only log the warning once per task or something similar.
However, adding something to task_struct for tracking this would be
needless bloat for a single pr_warn_ratelimited().
So just switch to pr_info_ratelimited() to avoid spamming the log
with something that isn't a real warning. There's lots of
info-level stuff in dmesg, it seems really unlikely that this
should be an actual problem. Most programs are already switching to
the new flags anyway.
- For the vm.memfd_noexec=2 case, we need to log a warning for every
failure because otherwise userspace will have no idea why their
previously working program started returning -EACCES (previously
-EINVAL) from memfd_create(2). pr_warn_once() is simply wrong here.
* The racheting mechanism for vm.memfd_noexec makes it incredibly
unappealing for most users to enable the sysctl because enabling it
on &init_pid_ns means you need a system reboot to unset it. Given the
actual security threat being protected against, CAP_SYS_ADMIN users
being restricted in this way makes little sense.
The argument for this ratcheting by the original author was that it
allows you to have a hierarchical setting that cannot be unset by
child pidnses, but this is not accurate -- changing the parent
pidns's vm.memfd_noexec setting to be more restrictive didn't affect
children.
Instead, switch the vm.memfd_noexec sysctl to be properly
hierarchical and allow CAP_SYS_ADMIN users (in the pidns's owning
userns) to lower the setting as long as it is not lower than the
parent's effective setting. This change also makes it so that
changing a parent pidns's vm.memfd_noexec will affect all
descendants, providing a properly hierarchical setting. The
performance impact of this is incredibly minimal since the maximum
depth of pidns is 32 and it is only checked during memfd_create(2)
and unshare(CLONE_NEWPID).
* The memfd selftests would not exit with a non-zero error code when
certain tests that ran in a forked process (specifically the ones
related to MFD_EXEC and MFD_NOEXEC_SEAL) failed.
[1]: https://lore.kernel.org/all/ZJwcsU0vI-nzgOB_@codewreck.org/
[2]: https://lore.kernel.org/all/20230705063315.3680666-1-jeffxu@google.com/
[3]: https://lore.kernel.org/Y5yS8wCnuYGLHMj4@x1n/
[4]: https://lore.kernel.org/f185bb42-b29c-977e-312e-3349eea15383@linuxfoundation.org/
This patch (of 5):
Before this change, a test runner using this self test would see a return
code of 0 when the tests using a child process (namely the MFD_NOEXEC_SEAL
and MFD_EXEC tests) failed, masking test failures.
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-0-7ff9e3e10ba6@cyphar.com
Link: https://lkml.kernel.org/r/20230814-memfd-vm-noexec-uapi-fixes-v2-1-7ff9e3e10ba6@cyphar.com
Fixes: 11f75a0144 ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC")
Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Jeff Xu <jeffxu@google.com>
Cc: "Christian Brauner (Microsoft)" <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit 686a8bb72349("selftests/mm: split uffd tests into uffd-stress and
uffd-unit-tests") split uffd tests into uffd-stress and uffd-unit-tests,
obviously we need to modify the help information synchronously.
Also modify code indentation.
Link: https://lkml.kernel.org/r/tencent_64FC724AC5F05568F41BD1C68058E83CEB05@qq.com
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test existence of files and validity of input keyword for DAMON monitoring
target based DAMOS filter on DAMON sysfs interface.
Link: https://lkml.kernel.org/r/20230802214312.110532-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest for checking existence of addr_{start,end} files under
DAMOS filter directory, and 'addr' damos filter type input of DAMON sysfs
interface.
Link: https://lkml.kernel.org/r/20230802214312.110532-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update sysfs.sh DAMON selftest for checking existence of 'total_bytes'
file under the 'tried_regions' directory of DAMON sysfs interface.
Link: https://lkml.kernel.org/r/20230802213222.109841-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add KSM_MERGE_TIME and KSM_MERGE_TIME_HUGE_PAGES tests with
size of 100.
./run_vmtests.sh -t ksm
-----------------------------
running ./ksm_tests -H -s 100
-----------------------------
Number of normal pages: 0
Number of huge pages: 50
Total size: 100 MiB
Total time: 0.399844662 s
Average speed: 250.097 MiB/s
[PASS]
-----------------------------
running ./ksm_tests -P -s 100
-----------------------------
Total size: 100 MiB
Total time: 0.451931496 s
Average speed: 221.272 MiB/s
[PASS]
Link: https://lkml.kernel.org/r/20230728164102.4655-1-ayush.jain3@amd.com
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 2c2241081f ("mm/gup: move private gup FOLL_ flags to
internal.h") FOLL_LONGTERM flag value got updated from 0x10000 to 0x100 at
include/linux/mm_types.h.
As hmm.hmm_device_private.hmm_gup_test uses FOLL_LONGTERM Updating same
here as well.
Before this change test goes in an infinite assert loop in
hmm.hmm_device_private.hmm_gup_test
==========================================================
RUN hmm.hmm_device_private.hmm_gup_test ...
hmm-tests.c:1962:hmm_gup_test:Expected HMM_DMIRROR_PROT_WRITE..
..(2) == m[2] (34)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
hmm-tests.c:157:hmm_gup_test:Expected ret (-1) == 0 (0)
...
==========================================================
Call Trace:
<TASK>
? sched_clock+0xd/0x20
? __lock_acquire.constprop.0+0x120/0x6c0
? ktime_get+0x2c/0xd0
? sched_clock+0xd/0x20
? local_clock+0x12/0xd0
? lock_release+0x26e/0x3b0
pin_user_pages_fast+0x4c/0x70
gup_test_ioctl+0x4ff/0xbb0
? gup_test_ioctl+0x68c/0xbb0
__x64_sys_ioctl+0x99/0xd0
do_syscall_64+0x60/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? syscall_exit_to_user_mode+0x2a/0x50
? do_syscall_64+0x6d/0x90
? irqentry_exit_to_user_mode+0xd/0x20
? irqentry_exit+0x3f/0x50
? exc_page_fault+0x96/0x200
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f6aaa31aaff
After this change test is able to pass successfully.
Link: https://lkml.kernel.org/r/20230808124347.79163-1-ayush.jain3@amd.com
Fixes: 2c2241081f ("mm/gup: move private gup FOLL_ flags to internal.h")
Signed-off-by: Ayush Jain <ayush.jain3@amd.com>
Reviewed-by: Raghavendra K T <raghavendra.kt@amd.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
test_kmem_basic creates 100,000 negative dentries, with each one mapping
to a slab object. After memory.high is set, these are reclaimed through
the shrink_slab function call which reclaims all 100,000 entries. The
test passes the majority of the time because when slab1 or current is
calculated, it is often above 0, however, 0 is also an acceptable value.
Link: https://lkml.kernel.org/r/7d6gcuyzdjcice6qbphrmpmv5skr5jtglg375unnjxqhstvhxc@qkn6dw6bao6v
Signed-off-by: Lucas Karpinski <lkarpins@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a test case for IPv6 source address delete.
As David suggested, add tests:
- Single device using src address
- Two devices with the same source address
- VRF with single device using src address
- VRF with two devices using src address
As Ido points out, in IPv6, the preferred source address is looked up in
the same VRF as the first nexthop device. This will give us similar results
to IPv4 if the route is installed in the same VRF as the nexthop device, but
not when the nexthop device is enslaved to a different VRF. So add tests:
- src address and nexthop dev in same VR
- src address and nexthop device in different VRF
The link local address delete logic is different from the global address.
It should only affect the associate device it bonds to. So add tests cases
for link local address testing.
Here is the test result:
IPv6 delete address route tests
Single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
Two devices with the same source address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
VRF with single device using src address
TEST: Prefsrc removed when src address removed on other device [ OK ]
VRF with two devices using src address
TEST: Prefsrc not removed when src address exist on other device [ OK ]
TEST: Prefsrc removed when src address removed on all devices [ OK ]
src address and nexthop dev in same VRF
TEST: Prefsrc removed from VRF when source address deleted [ OK ]
TEST: Prefsrc in default VRF not removed [ OK ]
TEST: Prefsrc not removed from VRF when source address exist [ OK ]
TEST: Prefsrc in default VRF removed [ OK ]
src address and nexthop device in different VRF
TEST: Prefsrc not removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc not removed in default VRF [ OK ]
TEST: Prefsrc removed from VRF when nexthop dev in diff VRF [ OK ]
TEST: Prefsrc removed in default VRF [ OK ]
Table ID 0
TEST: Prefsrc removed from default VRF when source address deleted [ OK ]
Link local source route
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed when delete ll addr [ OK ]
TEST: Prefsrc not removed when delete ll addr from other dev [ OK ]
TEST: Prefsrc removed even ll addr still exist on other dev [ OK ]
Tests passed: 19
Tests failed: 0
Suggested-by: Ido Schimmel <idosch@idosch.org>
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the initial commit 1a01727676 ("selftests: Add VRF route leaking
tests") said, the IPv6 MTU test fails as source address selection
picking ::1. Every time we run the selftest this one report failed.
There seems not much meaning to keep reporting a failure for 3 years
that no one plan to fix/update. Let't just skip this one first. We can
add it back when the issue fixed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update .gitignore to untrack tools directory and log.txt. "tools" is
generated in "selftests/net/Makefile" and log.txt is generated in
"selftests/net/gro.sh" when executing run_all_tests.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove assumptions about shared buffer cell size and instead query the
cell size from devlink. Adjust the test to send small packets that fit
inside a single cell.
Tested on Spectrum-{1,2,3,4}.
Fixes: 4735402173 ("mlxsw: spectrum: Extend to support Spectrum-4 ASIC")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/f7dfbf3c4d1cb23838d9eb99bab09afaa320c4ca.1692268427.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e1949 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88a ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When building the kernel and selftest with clang compiler (llvm17 or llvm18),
I hit the following compilation failure:
In file included from progs/test_lwt_redirect.c:3:
In file included from /usr/include/linux/ip.h:21:
In file included from /usr/include/asm/byteorder.h:5:
In file included from /usr/include/linux/byteorder/little_endian.h:13:
/usr/include/linux/swab.h:136:8: error: unknown type name '__always_inline'
136 | static __always_inline unsigned long __swab(const unsigned long y)
| ^
/usr/include/linux/swab.h:171:8: error: unknown type name '__always_inline'
171 | static __always_inline __u16 __swab16p(const __u16 *p)
...
bpf_helpers.h file provided a definition for __always_inline.
Putting 'ip.h' after 'bpf_helpers.h' fixed the issue.
Fixes: 43a7c3ef8a ("selftests/bpf: Add lwt_xmit tests for BPF_REDIRECT")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230818174312.1883381-1-yonghong.song@linux.dev
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
This test is arch specific, requires "munmap everything" primitive.
Link: https://lkml.kernel.org/r/20230630183434.17434-2-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unmap everything starting from 4GB length until it unmaps, otherwise test
has to detect which virtual memory split kernel is using.
Link: https://lkml.kernel.org/r/20230630183434.17434-1-adobriyan@gmail.com
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since the mas_preallocate() calculation has been updated to be more
precise, the testing must also be updated to check for what is expected.
Link: https://lkml.kernel.org/r/20230724183157.3939892-13-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current preallocation strategy is to preallocate the absolute
worst-case allocation for a tree modification. The entry (or NULL) is
needed to know how many nodes are needed to write to the tree. Start by
adding the argument to the mas_preallocate() definition.
Link: https://lkml.kernel.org/r/20230724183157.3939892-8-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is very unclear to me how one is supposed to run all the mm selftests
consistently and get clear results.
Most of the test programs are launched by both run_vmtests.sh and
run_kselftest.sh:
hugepage-mmap
hugepage-shm
map_hugetlb
hugepage-mremap
hugepage-vmemmap
hugetlb-madvise
map_fixed_noreplace
gup_test
gup_longterm
uffd-unit-tests
uffd-stress
compaction_test
on-fault-limit
map_populate
mlock-random-test
mlock2-tests
mrelease_test
mremap_test
thuge-gen
virtual_address_range
va_high_addr_switch
mremap_dontunmap
hmm-tests
madv_populate
memfd_secret
ksm_tests
ksm_functional_tests
soft-dirty
cow
However, of this set, when launched by run_vmtests.sh, some of the
programs are invoked multiple times with different arguments. When
invoked by run_kselftest.sh, they are invoked without arguments (and as
a consequence, some fail immediately).
Some test programs are only launched by run_vmtests.sh:
test_vmalloc.sh
And some test programs and only launched by run_kselftest.sh:
khugepaged
migration
mkdirty
transhuge-stress
split_huge_page_test
mdwe_test
write_to_hugetlbfs
Furthermore, run_vmtests.sh is invoked by run_kselftest.sh, so in this
case all the test programs invoked by both scripts are run twice!
Needless to say, this is a bit of a mess. In the absence of fully
understanding the history here, it looks to me like the best solution is
to launch ALL test programs from run_vmtests.sh, and ONLY invoke
run_vmtests.sh from run_kselftest.sh. This way, we get full control over
the parameters, each program is only invoked the intended number of
times, and regardless of which script is used, the same tests get run in
the same way.
The only drawback is that if using run_kselftest.sh, it's top-level tap
result reporting reports only a single test and it fails if any of the
contained tests fail. I don't see this as a big deal though since we
still see all the nested reporting from multiple layers. The other issue
with this is that all of run_vmtests.sh must execute within a single
kselftest timeout period, so let's increase that to something more
suitable.
In the Makefile, TEST_GEN_PROGS will compile and install the tests and
will add them to the list of tests that run_kselftest.sh will run.
TEST_GEN_FILES will compile and install the tests but will not add them
to the test list. So let's move all the programs from TEST_GEN_PROGS to
TEST_GEN_FILES so that they are built but not executed by
run_kselftest.sh. Note that run_vmtests.sh is added to TEST_PROGS, which
means it ends up in the test list. (the lack of "_GEN" means it won't be
compiled, but simply copied).
Link: https://lkml.kernel.org/r/20230724082522.1202616-9-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Until now, transhuge-stress runs until its explicitly killed, so when
invoked by run_kselftest.sh, it would run until the test timeout, then it
would be killed and the test would be marked as failed.
Add a new, optional command line parameter that allows the user to specify
the duration in seconds that the program should run. The program exits
after this duration with a success (0) exit code. If the argument is
omitted the old behacvior remains.
On it's own, this doesn't quite solve our problem because run_kselftest.sh
does not allow passing parameters to the program under test. But we will
shortly move this to run_vmtests.sh, which does allow parameter passing.
Link: https://lkml.kernel.org/r/20230724082522.1202616-8-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The `migration` test currently has a number of robustness problems that
cause it to hang and leak resources.
Timeout: There are 3 tests, which each previously ran for 60 seconds.
However, the timeout in mm/settings for a single test binary was set to 45
seconds. So when run using run_kselftest.sh, the top level timeout would
trigger before the test binary was finished. Solve this by meeting in the
middle; each of the 3 tests now runs for 20 seconds (for a total of 60),
and the top level timeout is set to 90 seconds.
Leaking child processes: the `shared_anon` test fork()s some children but
then an ASSERT() fires before the test kills those children. The assert
causes immediate exit of the parent and leaking of the children.
Furthermore, if run using the run_kselftest.sh wrapper, the wrapper would
get stuck waiting for those children to exit, which never happens. Solve
this by setting the "parent death signal" to SIGHUP in the child, so that
the child is killed automatically if the parent dies.
With these changes, the test binary now runs to completion on arm64, with
2 tests passing and the `shared_anon` test failing.
Link: https://lkml.kernel.org/r/20230724082522.1202616-7-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
va_high_addr_switch has a mechanism to determine if the tests should be
run or skipped (supported_arch()). This currently returns unconditionally
true for arm64. However, va_high_addr_switch also requires a large
virtual address space for the tests to run, otherwise they spuriously
fail.
Since arm64 can only support VA > 48 bits when the page size is 64K, let's
decide whether we should skip the test suite based on the page size. This
reduces noise when running on 4K and 16K kernels.
Link: https://lkml.kernel.org/r/20230724082522.1202616-6-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
thuge-gen was previously only munmapping part of the mmapped buffer, which
caused us to run out of 1G huge pages for a later part of the test. Fix
this by munmapping the whole buffer. Based on the code, it looks like a
typo rather than an intention to keep some of the buffer mapped.
thuge-gen was also calling mmap with SHM_HUGETLB flag (bit 11 set), which
is actually MAP_DENYWRITE in mmap context. The man page says this flag is
ignored in modern kernels. I'm pretty sure from the context that the
author intended to pass the MAP_HUGETLB flag so I've fixed that up too.
Link: https://lkml.kernel.org/r/20230724082522.1202616-5-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mrelease_test defaults to defining __NR_pidfd_open and
__NR_process_mrelease syscall numbers to -1, if they are not defined
anywhere else, and the suite would then be marked as skipped as a result.
arm64 (at least the stock debian toolchain that I'm using) requires
including <sys/syscall.h> to pull in the defines for these syscalls. So
let's add this header. With this in place, the test is passing on arm64.
Link: https://lkml.kernel.org/r/20230724082522.1202616-4-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
arm64 does not support the soft-dirty PTE bit. However, the `soft-dirty`
test suite is currently run unconditionally and therefore generates
spurious test failures on arm64. There are also some tests in
`madv_populate` which assume it is supported.
For `soft-dirty` lets disable the whole suite for arm64; it is no longer
built and run_vmtests.sh will skip it if its not present.
For `madv_populate`, we need a runtime mechanism so that the remaining
tests continue to be run. Unfortunately, the only way to determine if the
soft-dirty dirty bit is supported is to write to a page, then see if the
bit is set in /proc/self/pagemap. But the tests that we want to
conditionally execute are testing precicesly this. So if we introduced
this feature check, we could accedentally turn a real failure (on a system
that claims to support soft-dirty) into a skip. So instead, do the check
based on architecture; for arm64, we report that soft-dirty is not
supported.
Link: https://lkml.kernel.org/r/20230724082522.1202616-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm fixes for arm64", v3.
Given my on-going work on large anon folios and contpte mappings, I
decided it would be a good idea to start running mm selftests to help
guard against regressions. However, it soon became clear that I
couldn't get the suite to run cleanly on arm64 with a vanilla v6.5-rc1
kernel (perhaps I'm just doing it wrong??), so got stuck in a rabbit
hole trying to debug and fix all the issues. Some were down to
misconfigurations, but I also found a number of issues with the tests
and even a couple of issues with the kernel.
This patch (of 8):
The selftests runner pipes the test program's stdout to tap_prefix. The
presence of the pipe means that the test program sets its stdout to be
fully buffered (as aposed to line buffered when directly connected to the
terminal). The block buffering means that there is often content in the
buffer at fork() time, which causes the output to end up duplicated. This
was causing problems for mm:cow where test results were duplicated 20-30x.
Solve this by using `stdbuf`, when available to force the test program to
use line buffered mode. This means previously printf'ed results are
flushed out of the program before any fork().
Additionally, explicitly set line buffer mode in ksft_print_header(),
which means that all test programs that use the ksft framework will
benefit even if stdbuf is not present on the system.
[ryan.roberts@arm.com: add setvbuf() to set buffering mode]
Link: https://lkml.kernel.org/r/20230726070655.2713530-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230724082522.1202616-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20230724082522.1202616-2-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Florent Revest <revest@chromium.org>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add tests for the improvement made to read operation on HWPOISON
hugetlb page with different read granularities. For each chunk size,
three read scenarios are tested:
1. Simple regression test on read without HWPOISON.
2. Sequential read page by page should succeed until encounters the 1st
raw HWPOISON subpage.
3. After skip a raw HWPOISON subpage by lseek, read()s always succeed.
Link: https://lkml.kernel.org/r/20230713001833.3778937-5-jiaqiyan@google.com
Signed-off-by: Jiaqi Yan <jiaqiyan@google.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test is pretty basic, and exercises UFFDIO_POISON straightforwardly.
We register a region with userfaultfd, in missing fault mode. For each
fault, we either UFFDIO_COPY a zeroed page (odd pages) or UFFDIO_POISON
(even pages). We do this mix to test "something like a real use case",
where guest memory would be some mix of poisoned and non-poisoned pages.
We read each page in the region, and assert that the odd pages are zeroed
as expected, and the even pages yield a SIGBUS as expected.
Why UFFDIO_COPY instead of UFFDIO_ZEROPAGE? Because hugetlb doesn't
support UFFDIO_ZEROPAGE, and we don't want to have special case code.
Link: https://lkml.kernel.org/r/20230707215540.2324998-9-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, we had "one fault handler to rule them all", which used
several branches to deal with all of the scenarios required by all of the
various tests.
In upcoming patches, I plan to add a new test, which has its own slightly
different fault handling logic. Instead of continuing to add cruft to the
existing fault handler, let's allow tests to define custom ones, separate
from other tests.
Link: https://lkml.kernel.org/r/20230707215540.2324998-8-axelrasmussen@google.com
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Gaosheng Cui <cuigaosheng1@huawei.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nadav Amit <namit@vmware.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: T.J. Alumbaugh <talumbau@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a function test_unmerge_zero_page() to test the functionality on
unsharing and counting ksm-placed zero pages and counting of this patch
series.
test_unmerge_zero_page() actually contains four subjct test objects:
(1) whether the count of ksm zero pages can update correctly after merging;
(2) whether the count of ksm zero pages can update correctly after
unmerging by madvise(...MADV_UNMERGEABLE);
(3) whether the count of ksm zero pages can update correctly after
unmerging by triggering write fault.
(4) whether ksm zero pages are really unmerged.
Link: https://lkml.kernel.org/r/20230613030947.186089-1-yang.yang29@zte.com.cn
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Xiaokai Ran <ran.xiaokai@zte.com.cn>
Reviewed-by: Yang Yang <yang.yang29@zte.com.cn>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Xuexin Jiang <jiang.xuexin@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a test to verify that when a memcg hits its limit in zswap, it doesn't
trigger an unwanted writeback that would result in pages not owned by that
memcg to be sent to disk, even if zswap isn't full. This was fixed by
commit 0bdf0efa180a("zswap: do not shrink if cgroup may not zswap").
Link: https://lkml.kernel.org/r/20230621153548.428093-4-cerasuolodomenico@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a cgroup selftest that verifies memcg charging in zswap. The original
issue was that kmem bypass was applied to pages swapped out to zswap by
kswapd, resulting in zswapped memory not being charged. It was fixed by
commit cd08d80ecdac("mm: correctly charge compressed memory to its
memcg").
Link: https://lkml.kernel.org/r/20230621153548.428093-3-cerasuolodomenico@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests: cgroup: add zswap test program".
This series adds 2 zswap related selftests that verify known and fixed
issues. A new dedicated test program (test_zswap) is proposed since the
test cases are specific to zswap and hosts specific helpers.
The first patch adds the (empty) test program, while the other 2 add an
actual test function each.
This patch (of 3):
Add empty cgroup-zswap self test scaffold program, test functions to be
added in the next commits.
Link: https://lkml.kernel.org/r/20230621153548.428093-1-cerasuolodomenico@gmail.com
Link: https://lkml.kernel.org/r/20230621153548.428093-2-cerasuolodomenico@gmail.com
Signed-off-by: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add test for expanding range in RCU mode. If we use the fast path of the
slot store to expand range in RCU mode, this test will fail.
Link: https://lkml.kernel.org/r/20230628073657.75314-3-zhangpeng.00@bytedance.com
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a matrix for testing gup based on the current gup_test. Only run the
matrix when -a is specified because it's a bit slow.
It covers:
- Different types of huge pages: thp, hugetlb, or no huge page
- Permissions: Write / Read-only
- Fast-gup, with/without
- Types of the GUP: pin / gup / longterm pins
- Shared / Private memories
- GUP size: 1 / 512 / random page sizes
Link: https://lkml.kernel.org/r/20230628215310.73782-9-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allows to specify optional tests in run_vmtests.sh, where we can run time
consuming test matrix only when user specified "-a".
Link: https://lkml.kernel.org/r/20230628215310.73782-8-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kirill A . Shutemov <kirill@shutemov.name>
Cc: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds selftests that exercise kfunc flavor relocation
functionality added in the previous patch. The actual kfunc defined
in kernel/bpf/helpers.c is:
struct task_struct *bpf_task_acquire(struct task_struct *p)
The following relocation behaviors are checked:
struct task_struct *bpf_task_acquire___one(struct task_struct *name)
* Should succeed despite differing param name
struct task_struct *bpf_task_acquire___two(struct task_struct *p, void *ctx)
* Should fail because there is no two-param bpf_task_acquire
struct task_struct *bpf_task_acquire___three(void *ctx)
* Should fail because, despite vmlinux's bpf_task_acquire having one param,
the types don't match
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230817225353.2570845-2-davemarchevsky@fb.com
The hwcaps selftest currently relies on the assembler being able to
assemble the crc32w instruction but this is not in the base v8.0 so is not
accepted by the standard GCC configurations used by many distributions.
Switch to manually encoding to fix the build.
Fixes: 09d2e95a04 ("kselftest/arm64: add crc32 feature to hwcap test")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230816-arm64-fix-crc32-build-v1-1-40165c1290f2@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Add a mock_domain_hw_info function and an iommu_test_hw_info data
structure. This allows to test the IOMMU_GET_HW_INFO ioctl passing the
test_reg value for the mock_dev.
Link: https://lore.kernel.org/r/20230818101033.4100-5-yi.l.liu@intel.com
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There is no lwt test case for BPF_REROUTE yet. Add test cases for both
normal and abnormal situations. The abnormal situation is set up with an
fq qdisc on the reroute target device. Without proper fixes, overflow
this qdisc queue limit (to trigger a drop) would panic the kernel.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/62c8ddc1e924269dcf80d2e8af1a1e632cee0b3a.1692326837.git.yan@cloudflare.com
There is no lwt_xmit test case for BPF_REDIRECT yet. Add test cases for
both normal and abnormal situations. For abnormal test cases, devices
are set down or have its carrier set down. Without proper fixes,
BPF_REDIRECT to either ingress or egress of such device would panic the
kernel.
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/96bf435243641939d9c9da329fab29cb45f7df22.1692326837.git.yan@cloudflare.com
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option
is enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmTemA4ACgkQMUZtbf5S
IrtCThAAj+t35QM5BgGZowmrx9U4yF+kacDkdPztxlT8a/b+famrTtnZJ8USW+PF
VCk3Eu8JXheuyAOMArHyM84/crS6wim6mzGcXaucusA3981PFzoqdgCLLf9emAJ2
j9vzKrnHBtdd5fj8Exwq70KN4CzXyrzRgqwr2EXBK9lH59HjX0+J7o+trbDxNmFK
RZJE2oDCqf939iRGG3PhJryKYBmrQaMtdonNpSU5PiiRT0HnVYcEtdWcOXK7d53D
onpoaPdawcsqsns5c5Qj01E1OdyM8X54BEGkl/S4FmSw5jF9Bp6btmTcxYYtdb7E
M3CeYROZ0Kt8KcKKje/o1AzdGqWq8Hnxfwy+2WulZAHMucshg0JPm6Ev74WRondw
NGYriKJSdORSO8idK9K/i7pnjZXYr9gU50lpPUFU+QzSdd+zv+U11arjAodwI9Wi
pW+dFi3UR7J01LidaxclvHmWnZ7d5sSzE2khpqb0xd0+PagRGesl8qnKyoDJNS1P
IHsOrRh9aXLzEZjud/rVG+sUobQvc1oiHW+hvbJ04GLKoli9U5poGT2fcaa4O67M
T7JcN5oGDF+PIHJKgTEN7pfX2epY33gmofKUhbt/OPOqnvZOVbTu7/ojjuJZ8Lc5
SF8AvTe+lECcX8Htjq30PoVfai+FT6AhnZzK0H9K4HMfUB9O32Q=
=Ze13
-----END PGP SIGNATURE-----
Merge tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from ipsec and netfilter.
No known outstanding regressions.
Fixes to fixes:
- virtio-net: set queues after driver_ok, avoid a potential race
added by recent fix
- Revert "vlan: Fix VLAN 0 memory leak", it may lead to a warning
when VLAN 0 is registered explicitly
- nf_tables:
- fix false-positive lockdep splat in recent fixes
- don't fail inserts if duplicate has expired (fix test failures)
- fix races between garbage collection and netns dismantle
Current release - new code bugs:
- mlx5: Fix mlx5_cmd_update_root_ft() error flow
Previous releases - regressions:
- phy: fix IRQ-based wake-on-lan over hibernate / power off
Previous releases - always broken:
- sock: fix misuse of sk_under_memory_pressure() preventing system
from exiting global TCP memory pressure if a single cgroup is under
pressure
- fix the RTO timer retransmitting skb every 1ms if linear option is
enabled
- af_key: fix sadb_x_filter validation, amment netlink policy
- ipsec: fix slab-use-after-free in decode_session6()
- macb: in ZynqMP resume always configure PS GTR for non-wakeup
source
Misc:
- netfilter: set default timeout to 3 secs for sctp shutdown send and
recv state (from 300ms), align with protocol timers"
* tag 'net-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
ice: Block switchdev mode when ADQ is active and vice versa
qede: fix firmware halt over suspend and resume
net: do not allow gso_size to be set to GSO_BY_FRAGS
sock: Fix misuse of sk_under_memory_pressure()
sfc: don't fail probe if MAE/TC setup fails
sfc: don't unregister flow_indr if it was never registered
net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset
net/mlx5: Fix mlx5_cmd_update_root_ft() error flow
net/mlx5e: XDP, Fix fifo overrun on XDP_REDIRECT
i40e: fix misleading debug logs
iavf: fix FDIR rule fields masks validation
ipv6: fix indentation of a config attribute
mailmap: add entries for Simon Horman
broadcom: b44: Use b44_writephy() return value
net: openvswitch: reject negative ifindex
team: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves
net: phy: broadcom: stub c45 read/write for 54810
netfilter: nft_dynset: disallow object maps
netfilter: nf_tables: GC transaction race with netns dismantle
netfilter: nf_tables: fix GC transaction races with netns and netlink event exit path
...
Add a test to ensure that setting both generic and fixed performance
event filters does not affect the consistency of the fixed event filter
behavior in KVM.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-7-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add tests to cover that pmu event_filter works as expected when it's
applied to fixed performance counters, even if there is none fixed
counter exists (e.g. Intel guest pmu version=1 or AMD guest).
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Link: https://lore.kernel.org/r/20230810090945.16053-6-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add test cases to verify the handling of unsupported input values for the
PMU event filter. The tests cover unsupported "action" values, unsupported
"flags" values, and unsupported "nevents" values. All these cases should
return an error, as they are currently not supported by the filter.
Furthermore, the tests also cover the case where setting non-existent
fixed counters in the fixed bitmap does not fail.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Reviewed-by: Isaku Yamahata <isaku.yamahata@intel.com>
Link: https://lore.kernel.org/r/20230810090945.16053-5-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add custom "__kvm_pmu_event_filter" structure to improve pmu event
filter settings. Simplifies event filter setup by organizing event
filter parameters in a cleaner, more organized way.
Alternatively, selftests could use a struct overlay ala vcpu_set_msr()
to avoid dynamically allocating the array:
struct {
struct kvm_msrs header;
struct kvm_msr_entry entry;
} buffer = {};
memset(&buffer, 0, sizeof(buffer));
buffer.header.nmsrs = 1;
buffer.entry.index = msr_index;
buffer.entry.data = msr_value;
but the extra layer added by the nested structs is counterproductive
to writing efficient, clean code.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-4-cloudliang@tencent.com
[sean: massage changelog to explain alternative]
Signed-off-by: Sean Christopherson <seanjc@google.com>
None of the callers consume remove_event(), and it incorrectly implies
that the incoming filter isn't modified. Drop the return.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-3-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add x86 properties for Intel PMU so that tests don't have to manually
retrieve the correct CPUID leaf+register, and so that the resulting code
is self-documenting.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Link: https://lore.kernel.org/r/20230810090945.16053-2-cloudliang@tencent.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZN0eNgAKCRDbK58LschI
gwhhAQCwbrEgA3LslDlk22eqyfRH04D+9d7Kc3ISQssyjlr9swD+NfwfDvYqopwj
Dp67QkHdluixf2/NMPTEvg/CA4mlmww=
=4BwF
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-08-16
We've added 17 non-merge commits during the last 6 day(s) which contain
a total of 20 files changed, 1179 insertions(+), 37 deletions(-).
The main changes are:
1) Add a BPF hook in sys_socket() to change the protocol ID
from IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy
applications, from Geliang Tang.
2) Follow-up/fallout fix from the SO_REUSEPORT + bpf_sk_assign work
to fix a splat on non-fullsock sks in inet[6]_steal_sock,
from Lorenz Bauer.
3) Improvements to struct_ops links to avoid forcing presence of
update/validate callbacks. Also add bpf_struct_ops fields documentation,
from David Vernet.
4) Ensure libbpf sets close-on-exec flag on gzopen, from Marco Vedovati.
5) Several new tcx selftest additions and bpftool link show support for
tcx and xdp links, from Daniel Borkmann.
6) Fix a smatch warning on uninitialized symbol in
bpf_perf_link_fill_kprobe, from Yafang Shao.
7) BPF selftest fixes e.g. misplaced break in kfunc_call test,
from Yipeng Zou.
8) Small cleanup to remove unused declaration bpf_link_new_file,
from Yue Haibing.
9) Small typo fix to bpftool's perf help message, from Daniel T. Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add mptcpify test
selftests/bpf: Fix error checks of mptcp open_and_load
selftests/bpf: Add two mptcp netns helpers
bpf: Add update_socket_protocol hook
bpftool: Implement link show support for xdp
bpftool: Implement link show support for tcx
selftests/bpf: Add selftest for fill_link_info
bpf: Fix uninitialized symbol in bpf_perf_link_fill_kprobe()
net: Fix slab-out-of-bounds in inet[6]_steal_sock
bpf: Document struct bpf_struct_ops fields
bpf: Support default .validate() and .update() behavior for struct_ops links
selftests/bpf: Add various more tcx test cases
selftests/bpf: Clean up fmod_ret in bench_rename test script
selftests/bpf: Fix repeat option when kfunc_call verification fails
libbpf: Set close-on-exec flag on gzopen
bpftool: fix perf help message
bpf: Remove unused declaration bpf_link_new_file()
====================
Link: https://lore.kernel.org/r/20230816212840.1539-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This testcase is constrived to reproduce a problem that the cpu buffers
become unavailable which is due to 'record_disabled' of array_buffer and
max_buffer being messed up.
Local test result after bugfix:
# ./ftracetest test.d/00basic/snapshot1.tc
=== Ftrace unit tests ===
[1] Snapshot and tracing_cpumask [PASS]
[2] (instance) Snapshot and tracing_cpumask [PASS]
# of passed: 2
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Link: https://lkml.kernel.org/r/20230805033816.3284594-3-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <vnagarnaik@google.com>
Cc: <shuah@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Implement a new test program mptcpify: if the family is AF_INET or
AF_INET6, the type is SOCK_STREAM, and the protocol ID is 0 or
IPPROTO_TCP, set it to IPPROTO_MPTCP. It will be hooked in
update_socket_protocol().
Extend the MPTCP test base, add a selftest test_mptcpify() for the
mptcpify case. Open and load the mptcpify test prog to mptcpify the
TCP sockets dynamically, then use start_server() and connect_to_fd()
to create a TCP socket, but actually what's created is an MPTCP
socket, which can be verified through 'getsockopt(SOL_PROTOCOL)'
and 'getsockopt(MPTCP_INFO)'.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/364e72f307e7bb38382ec7442c182d76298a9c41.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Return libbpf_get_error(), instead of -EIO, for the error from
mptcp_sock__open_and_load().
Load success means prog_fd and map_fd are always valid. So drop these
unneeded ASSERT_GE checks for them in mptcp run_test().
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/db5fcb93293df9ab173edcbaf8252465b80da6f2.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add two netns helpers for mptcp tests: create_netns() and
cleanup_netns(). Use them in test_base().
These new helpers will be re-used in the following commits
introducing new tests.
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/7506371fb6c417b401cc9d7365fe455754f4ba3f.1692147782.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
At the moment the cachestat syscall number is hard coded into the test
source code.
Remove that and replace it with the proper __NR_cachestat macro.
That ensures compatibility should other architectures pick a different
number.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Libraries should be listed last on the compiler's command line, so that
the linker can look for and find still unresolved symbols. The librt
library, required for the shm_* functions, was announced using CFLAGS,
which puts the library *before* the source files, and fails compilation
on my system:
======================
gcc -isystem /src/linux-selftests/usr/include -Wall -lrt test_cachestat.c
-o /src/linux-selftests/kselftest/cachestat/test_cachestat
/usr/bin/ld: /tmp/cceQWO3u.o: in function `test_cachestat_shmem':
test_cachestat.c:(.text+0x890): undefined reference to `shm_open'
/usr/bin/ld: test_cachestat.c:(.text+0x99c): undefined reference to `shm_unlink'
collect2: error: ld returned 1 exit status
make[4]: *** [../lib.mk:181: /src/linux-selftests/kselftest/cachestat/test_cachestat] Error 1
======================
Announce the library using the LDLIBS variable, which ensures the proper
ordering on the command line.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Observed occassional failures in the futex_wait_timeout test:
ok 1 futex_wait relative succeeds
ok 2 futex_wait_bitset realtime succeeds
ok 3 futex_wait_bitset monotonic succeeds
ok 4 futex_wait_requeue_pi realtime succeeds
ok 5 futex_wait_requeue_pi monotonic succeeds
not ok 6 futex_lock_pi realtime returned 0
......
The test expects the child thread to complete some steps before
the parent thread gets to run. There is an implicit expectation
of the order of invocation of futex_lock_pi between the child thread
and the parent thread. Make this order explicit. If the order is
not met, the futex_lock_pi call in the parent thread succeeds and
will not timeout.
Fixes: f4addd54b1 ("selftests: futex: Expand timeout test")
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We have some dmabuf-heaps and perf_events tests but they are not hooked
up to the kselftest build infrastructure which is a bit of an obstacle
to running them in systems with generic infrastructure for selftests.
Add them to the top level kselftest Makefile so they get built as
standard.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
