* kvm-arm64/pkvm-memshare-declutter:
: .
: pKVM memory transition simplifications, courtesy of Quentin Perret.
:
: From the cover letter:
: "Since its early days, pKVM has formalized memory 'transitions' (shares
: and donations) using 'struct pkvm_mem_transition' and bunch of helpers
: to manipulate it. The intention was for all transitions to use this
: machinery to ensure we're checking things consistently. However, as
: development progressed, it became clear that the rigidity of this model
: made it really difficult to use in some use-cases which ended-up
: side-stepping it entirely. That is the case for the
: hyp_{un}pin_shared_mem() and host_{un}share_guest() paths upstream which
: use lower level helpers directly, as well as for several other pKVM
: features that should land upstream in the future (ex: when a guest
: relinquishes a page during ballooning, when annotating a page that is
: being DMA'd to, ...). On top of this, the pkvm_mem_transition machinery
: requires a lot of boilerplate which makes the code hard to read, but
: also adds layers of indirection that no compilers seems to see through,
: hence leading to suboptimal generated code.
:
: Given all the above, this series removes the pkvm_mem_transition
: machinery from mem_protect.c, and converts all its users to use
: __*_{check,set}_page_state_range() low-level helpers directly."
: .
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
Signed-off-by: Marc Zyngier <maz@kernel.org>
It appears that on Qualcomm's x1e CPU, CNTVOFF_EL2 doesn't really
work, specially with HCR_EL2.E2H=1.
A non-zero offset results in a screaming virtual timer interrupt,
to the tune of a few 100k interrupts per second on a 4 vcpu VM.
This is also evidenced by this CPU's inability to correctly run
any of the timer selftests.
The only case this doesn't break is when this register is set to 0,
which breaks VM migration.
When HCR_EL2.E2H=0, the timer seems to behave normally, and does
not result in an interrupt storm.
As a workaround, use the fact that this CPU implements FEAT_ECV,
and trap all accesses to the virtual timer and counter, keeping
CNTVOFF_EL2 set to zero, and emulate accesses to CVAL/TVAL/CTL
and the counter itself, fixing up the timer to account for the
missing offset.
And if you think this is disgusting, you'd probably be right.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Although FEAT_ECV allows us to correctly emulate the timers, it also
reduces performances pretty badly.
Mitigate this by emulating the CTL/CVAL register reads in the
inner run loop, without returning to the general kernel.
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-6-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Emulating the timers with FEAT_NV2 is a bit odd, as the timers
can be reconfigured behind our back without the hypervisor even
noticing. In the VHE case, that's an actual regression in the
architecture...
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20241217142321.763801-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Having separate helpers for enabling/disabling counters provides the
wrong abstraction, as the state of each counter needs to be evaluated
independently and, in some cases, use a different global enable bit.
Collapse the enable/disable accessors into a single, common helper that
reconfigures every counter set in @mask, leaving the complexity of
determining if an event is actually enabled in
kvm_pmu_counter_is_enabled().
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241217175513.3658056-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
VGIC_MAX_PRIVATE is a pretty useless definition, and is better
replaced with VGIC_NR_PRIVATE_IRQS.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241117165757.247686-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/nv-pmu:
: Support for vEL2 PMU controls
:
: Align the vEL2 PMU support with the current state of non-nested KVM,
: including:
:
: - Trap routing, with the annoying complication of EL2 traps that apply
: in Host EL0
:
: - PMU emulation, using the correct configuration bits depending on
: whether a counter falls in the hypervisor or guest range of PMCs
:
: - Perf event swizzling across nested boundaries, as the event filtering
: needs to be remapped to cope with vEL2
KVM: arm64: nv: Reprogram PMU events affected by nested transition
KVM: arm64: nv: Apply EL2 event filtering when in hyp context
KVM: arm64: nv: Honor MDCR_EL2.HLP
KVM: arm64: nv: Honor MDCR_EL2.HPME
KVM: arm64: Add helpers to determine if PMC counts at a given EL
KVM: arm64: nv: Adjust range of accessible PMCs according to HPMN
KVM: arm64: Rename kvm_pmu_valid_counter_mask()
KVM: arm64: nv: Advertise support for FEAT_HPMN0
KVM: arm64: nv: Describe trap behaviour of MDCR_EL2.HPMN
KVM: arm64: nv: Honor MDCR_EL2.{TPM, TPMCR} in Host EL0
KVM: arm64: nv: Reinject traps that take effect in Host EL0
KVM: arm64: nv: Rename BEHAVE_FORWARD_ANY
KVM: arm64: nv: Allow coarse-grained trap combos to use complex traps
KVM: arm64: Describe RES0/RES1 bits of MDCR_EL2
arm64: sysreg: Add new definitions for ID_AA64DFR0_EL1
arm64: sysreg: Migrate MDCR_EL2 definition to table
arm64: sysreg: Describe ID_AA64DFR2_EL1 fields
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/psci-1.3:
: PSCI v1.3 support, courtesy of David Woodhouse
:
: Bump KVM's PSCI implementation up to v1.3, with the added bonus of
: implementing the SYSTEM_OFF2 call. Like other system-scoped PSCI calls,
: this gets relayed to userspace for further processing with a new
: KVM_SYSTEM_EVENT_SHUTDOWN flag.
:
: As an added bonus, implement client-side support for hibernation with
: the SYSTEM_OFF2 call.
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
KVM: arm64: nvhe: Pass through PSCI v1.3 SYSTEM_OFF2 call
KVM: selftests: Add test for PSCI SYSTEM_OFF2
KVM: arm64: Add support for PSCI v1.2 and v1.3
KVM: arm64: Add PSCI v1.3 SYSTEM_OFF2 function for hibernation
firmware/psci: Add definitions for PSCI v1.3 specification
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Start reprogramming PMU events at nested boundaries now that everything
is in place to handle the EL2 event filter. Only repaint events where
the filter differs between EL1 and EL2 as a slight optimization.
PMU now 'works' for nested VMs, albeit slow.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182559.3364829-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The value of MDCR_EL2.HPMN controls the number of event counters made
visible to EL0 and EL1. This means it is possible for the guest
hypervisor to allow direct access to event counters to the L2.
Rework KVM's PMU register emulation to take the effects of HPMN into
account when handling a trap. For bitmask-style registers, writes only
affect accessible registers.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-14-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Nested PMU support requires dynamically changing the visible range of
PMU counters based on the exception level and value of MDCR_EL2.HPMN. At
the same time, the PMU emulation code needs to know the absolute number
of implemented counters, regardless of context.
Rename the existing helper to make it obvious that it returns the number
of implemented counters and not anything else.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-13-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
MDCR_EL2.HPMN splits the PMU event counters into two ranges: the first
range is accessible from all ELs, and the second range is accessible
only to EL2/3. Supposing the guest hypervisor allows direct access to
the PMU counters from the L2, KVM needs to locally handle those
accesses.
Add a new complex trap configuration for HPMN that checks if the counter
index is accessible to the current context. As written, the architecture
suggests HPMN only causes PMEVCNTR<n>_EL0 to trap, though intuition (and
the pseudocode) suggest that the trap applies to PMEVTYPER<n>_EL0 as
well.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241025182354.3364124-11-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Accessing CNTHCTL_EL2 is fraught with danger if running with
HCR_EL2.E2H=1: half of the bits are held in CNTKCTL_EL1, and
thus can be changed behind our back, while the rest lives
in the CNTHCTL_EL2 shadow copy that is memory-based.
Yes, this is a lot of fun!
Make sure that we merge the two on read access, while we can
write to CNTKCTL_EL1 in a more straightforward manner.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20241023145345.1613824-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
As with PSCI v1.1 in commit 512865d83f ("KVM: arm64: Bump guest PSCI
version to 1.1"), expose v1.3 to the guest by default. The SYSTEM_OFF2
call which is exposed by doing so is compatible for userspace because
it's just a new flag in the event that KVM raises, in precisely the same
way that SYSTEM_RESET2 was compatible when v1.1 was enabled by default.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Link: https://lore.kernel.org/r/20241019172459.2241939-4-dwmw2@infradead.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
There are 2 defines for the number of PMU counters:
ARMV8_PMU_MAX_COUNTERS and ARMPMU_MAX_HWEVENTS. Both are the same
currently, but Armv9.4/8.9 increases the number of possible counters
from 32 to 33. With this change, the maximum number of counters will
differ for KVM's PMU emulation which is PMUv3.4. Give KVM PMU emulation
its own define to decouple it from the rest of the kernel's number PMU
counters.
The VHE PMU code needs to match the PMU driver, so switch it to use
ARMPMU_MAX_HWEVENTS instead.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-6-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
The PMUv3 and KVM code each have a define for the PMU cycle counter
index. Move KVM's define to a shared location and use it for PMUv3
driver.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-5-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Various PMUv3 registers which are a mask of counters are 64-bit
registers, but the accessor functions take a u32. This has been fine as
the upper 32-bits have been RES0 as there has been a maximum of 32
counters prior to Armv9.4/8.9. With Armv9.4/8.9, a 33rd counter is
added. Update the accessor functions to use a u64 instead.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Tested-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240731-arm-pmu-3-9-icntr-v3-2-280a8d7ff465@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
* kvm-arm64/misc-6.10:
: .
: Misc fixes and updates targeting 6.10
:
: - Improve boot-time diagnostics when the sysreg tables
: are not correctly sorted
:
: - Allow FFA_MSG_SEND_DIRECT_REQ in the FFA proxy
:
: - Fix duplicate XNX field in the ID_AA64MMFR1_EL1
: writeable mask
:
: - Allocate PPIs and SGIs outside of the vcpu structure, allowing
: for smaller EL2 mapping and some flexibility in implementing
: more or less than 32 private IRQs.
:
: - Use bitmap_gather() instead of its open-coded equivalent
:
: - Make protected mode use hVHE if available
:
: - Purge stale mpidr_data if a vcpu is created after the MPIDR
: map has been created
: .
KVM: arm64: Destroy mpidr_data for 'late' vCPU creation
KVM: arm64: Use hVHE in pKVM by default on CPUs with VHE support
KVM: arm64: Fix hvhe/nvhe early alias parsing
KVM: arm64: Convert kvm_mpidr_index() to bitmap_gather()
KVM: arm64: vgic: Allocate private interrupts on demand
KVM: arm64: Remove duplicated AA64MMFR1_EL1 XNX
KVM: arm64: Remove FFA_MSG_SEND_DIRECT_REQ from the denylist
KVM: arm64: Improve out-of-order sysreg table diagnostics
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-6.10: (25 commits)
: .
: At last, a bunch of pKVM patches, courtesy of Fuad Tabba.
: From the cover letter:
:
: "This series is a bit of a bombay-mix of patches we've been
: carrying. There's no one overarching theme, but they do improve
: the code by fixing existing bugs in pKVM, refactoring code to
: make it more readable and easier to re-use for pKVM, or adding
: functionality to the existing pKVM code upstream."
: .
KVM: arm64: Force injection of a data abort on NISV MMIO exit
KVM: arm64: Restrict supported capabilities for protected VMs
KVM: arm64: Refactor setting the return value in kvm_vm_ioctl_enable_cap()
KVM: arm64: Document the KVM/arm64-specific calls in hypercalls.rst
KVM: arm64: Rename firmware pseudo-register documentation file
KVM: arm64: Reformat/beautify PTP hypercall documentation
KVM: arm64: Clarify rationale for ZCR_EL1 value restored on guest exit
KVM: arm64: Introduce and use predicates that check for protected VMs
KVM: arm64: Add is_pkvm_initialized() helper
KVM: arm64: Simplify vgic-v3 hypercalls
KVM: arm64: Move setting the page as dirty out of the critical section
KVM: arm64: Change kvm_handle_mmio_return() return polarity
KVM: arm64: Fix comment for __pkvm_vcpu_init_traps()
KVM: arm64: Prevent kmemleak from accessing .hyp.data
KVM: arm64: Do not map the host fpsimd state to hyp in pKVM
KVM: arm64: Rename __tlb_switch_to_{guest,host}() in VHE
KVM: arm64: Support TLB invalidation in guest context
KVM: arm64: Avoid BBM when changing only s/w bits in Stage-2 PTE
KVM: arm64: Check for PTE validity when checking for executable/cacheable
KVM: arm64: Avoid BUG-ing from the host abort path
...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Private interrupts are currently part of the CPU interface structure
that is part of each and every vcpu we create.
Currently, we have 32 of them per vcpu, resulting in a per-vcpu array
that is just shy of 4kB. On its own, that's no big deal, but it gets
in the way of other things:
- each vcpu gets mapped at EL2 on nVHE/hVHE configurations. This
requires memory that is physically contiguous. However, the EL2
code has no purpose looking at the interrupt structures and
could do without them being mapped.
- supporting features such as EPPIs, which extend the number of
private interrupts past the 32 limit would make the array
even larger, even for VMs that do not use the EPPI feature.
Address these issues by moving the private interrupt array outside
of the vcpu, and replace it with a simple pointer. We take this
opportunity to make it obvious what gets initialised when, as
that path was remarkably opaque, and tighten the locking.
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240502154545.3012089-1-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Consolidate the GICv3 VMCR accessor hypercalls into the APR save/restore
hypercalls so that all of the EL2 GICv3 state is covered by a single pair
of hypercalls.
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240423150538.2103045-17-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The last genuine use case for the lpi_list_lock was the global LPI
translation cache, which has been removed in favor of a per-ITS xarray.
Remove a layer from the locking puzzle by getting rid of it.
vgic_add_lpi() still has a critical section that needs to protect
against the insertion of other LPIs; change it to take the LPI xarray's
xa_lock to retain this property.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-13-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Within the context of a single ITS, it is possible to use an xarray to
cache the device ID & event ID translation to a particular irq
descriptor. Take advantage of this to build a translation cache capable
of fitting all valid translations for a given ITS.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-9-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
The last user has been transitioned to walking the LPI xarray directly.
Cut the wart off, and get rid of the now unneeded lpi_count while doing
so.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-7-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
The vgic debug iterator is the final user of vgic_copy_lpi_list(), but
is a bit more complicated to transition to something else. Use a mark
in the LPI xarray to record the indices 'known' to the debug iterator.
Protect against the LPIs from being freed by associating an additional
reference with the xarray mark.
Rework iter_next() to let the xarray walk 'drive' the iteration after
visiting all of the SGIs, PPIs, and SPIs.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240422200158.2606761-6-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Programming PMU events in the host that count during guest execution is
a feature supported by perf, e.g.
perf stat -e cpu_cycles:G ./lkvm run
While this works for VHE, the guest/host event bitmaps are not carried
through to the hypervisor in the nVHE configuration. Make
kvm_pmu_update_vcpu_events() conditional on whether or not _hardware_
supports PMUv3 rather than if the vCPU as vPMU enabled.
Cc: stable@vger.kernel.org
Fixes: 84d751a019 ("KVM: arm64: Pass pmu events to hyp via vcpu")
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240305184840.636212-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/lpi-xarray:
: xarray-based representation of vgic LPIs
:
: KVM's linked-list of LPI state has proven to be a bottleneck in LPI
: injection paths, due to lock serialization when acquiring / releasing a
: reference on an IRQ.
:
: Start the tedious process of reworking KVM's LPI injection by replacing
: the LPI linked-list with an xarray, leveraging this to allow RCU readers
: to walk it outside of the spinlock.
KVM: arm64: vgic: Don't acquire the lpi_list_lock in vgic_put_irq()
KVM: arm64: vgic: Ensure the irq refcount is nonzero when taking a ref
KVM: arm64: vgic: Rely on RCU protection in vgic_get_lpi()
KVM: arm64: vgic: Free LPI vgic_irq structs in an RCU-safe manner
KVM: arm64: vgic: Use atomics to count LPIs
KVM: arm64: vgic: Get rid of the LPI linked-list
KVM: arm64: vgic-its: Walk the LPI xarray in vgic_copy_lpi_list()
KVM: arm64: vgic-v3: Iterate the xarray to find pending LPIs
KVM: arm64: vgic: Use xarray to find LPI in vgic_get_lpi()
KVM: arm64: vgic: Store LPIs in an xarray
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Free the vgic_irq structs in an RCU-safe manner to allow reads of the
LPI configuration data to happen in parallel with the release of LPIs.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-8-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
All readers of LPI configuration have been transitioned to use the LPI
xarray. Get rid of the linked-list altogether.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Using a linked-list for LPIs is less than ideal as it of course requires
iterative searches to find a particular entry. An xarray is a better
data structure for this use case, as it provides faster searches and can
still handle a potentially sparse range of INTID allocations.
Start by storing LPIs in an xarray, punting usage of the xarray to a
subsequent change. The observant among you will notice that we added yet
another lock to the chain of locking order rules; document the ordering
of the xa_lock. Don't worry, we'll get rid of the lpi_list_lock one
day...
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240221054253.3848076-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to make it easier to check whether a particular feature
is exposed to a guest, add a new set of helpers, with kvm_has_feat()
being the most useful.
Let's start making use of them in the PMU code (courtesy of Oliver).
Follow-up changes will introduce additional use patterns.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Co-developed--by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240214131827.2856277-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZUFJRgAKCRCivnWIJHzd
FtgYAP9cMsc1Mhlw3jNQnTc6q0cbTulD/SoEDPUat1dXMqjs+gEAnskwQTrTX834
fgGQeCAyp7Gmar+KeP64H0xm8kPSpAw=
=R4M7
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.7
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its guest
- Optimization for vSGI injection, opportunistically compressing MPIDR
to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems, reducing
the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
* kvm-arm64/pmu_pmcr_n:
: User-defined PMC limit, courtesy Raghavendra Rao Ananta
:
: Certain VMMs may want to reserve some PMCs for host use while running a
: KVM guest. This was a bit difficult before, as KVM advertised all
: supported counters to the guest. Userspace can now limit the number of
: advertised PMCs by writing to PMCR_EL0.N, as KVM's sysreg and PMU
: emulation enforce the specified limit for handling guest accesses.
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: PMU: Set PMCR_EL0.N for vCPU based on the associated PMU
KVM: arm64: PMU: Add a helper to read a vCPU's PMCR_EL0
KVM: arm64: Select default PMU in KVM_ARM_VCPU_INIT handler
KVM: arm64: PMU: Introduce helpers to set the guest's PMU
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/sgi-injection:
: vSGI injection improvements + fixes, courtesy Marc Zyngier
:
: Avoid linearly searching for vSGI targets using a compressed MPIDR to
: index a cache. While at it, fix some egregious bugs in KVM's mishandling
: of vcpuid (user-controlled value) and vcpu_idx.
KVM: arm64: Clarify the ordering requirements for vcpu/RD creation
KVM: arm64: vgic-v3: Optimize affinity-based SGI injection
KVM: arm64: Fast-track kvm_mpidr_to_vcpu() when mpidr_data is available
KVM: arm64: Build MPIDR to vcpu index cache at runtime
KVM: arm64: Simplify kvm_vcpu_get_mpidr_aff()
KVM: arm64: Use vcpu_idx for invalidation tracking
KVM: arm64: vgic: Use vcpu_idx for the debug information
KVM: arm64: vgic-v2: Use cpuid from userspace as vcpu_id
KVM: arm64: vgic-v3: Refactor GICv3 SGI generation
KVM: arm64: vgic-its: Treat the collection target address as a vcpu_id
KVM: arm64: vgic: Make kvm_vgic_inject_irq() take a vcpu pointer
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/pmevtyper-filter:
: Fixes to KVM's handling of the PMUv3 exception level filtering bits
:
: - NSH (count at EL2) and M (count at EL3) should be stateful when the
: respective EL is advertised in the ID registers but have no effect on
: event counting.
:
: - NSU and NSK modify the event filtering of EL0 and EL1, respectively.
: Though the kernel may not use these bits, other KVM guests might.
: Implement these bits exactly as written in the pseudocode if EL3 is
: advertised.
KVM: arm64: Add PMU event filter bits required if EL3 is implemented
KVM: arm64: Make PMEVTYPER<n>_EL0.NSH RES0 if EL2 isn't advertised
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
For unimplemented counters, the registers PM{C,I}NTEN{SET,CLR}
and PMOVS{SET,CLR} are expected to have the corresponding bits RAZ.
Hence to ensure correct KVM's PMU emulation, mask out the RES0 bits.
Defer this work to the point that userspace can no longer change the
number of advertised PMCs.
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-7-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The number of PMU event counters is indicated in PMCR_EL0.N.
For a vCPU with PMUv3 configured, the value is set to the same
value as the current PE on every vCPU reset. Unless the vCPU is
pinned to PEs that has the PMU associated to the guest from the
initial vCPU reset, the value might be different from the PMU's
PMCR_EL0.N on heterogeneous PMU systems.
Fix this by setting the vCPU's PMCR_EL0.N to the PMU's PMCR_EL0.N
value. Track the PMCR_EL0.N per guest, as only one PMU can be set
for the guest (PMCR_EL0.N must be the same for all vCPUs of the
guest), and it is convenient for updating the value.
To achieve this, the patch introduces a helper,
kvm_arm_pmu_get_max_counters(), that reads the maximum number of
counters from the arm_pmu associated to the VM. Make the function
global as upcoming patches will be interested to know the value
while setting the PMCR.N of the guest from userspace.
KVM does not yet support userspace modifying PMCR_EL0.N.
The following patch will add support for that.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-5-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add a helper to read a vCPU's PMCR_EL0, and use it whenever KVM
reads a vCPU's PMCR_EL0.
Currently, the PMCR_EL0 value is tracked per vCPU. The following
patches will make (only) PMCR_EL0.N track per guest. Having the
new helper will be useful to combine the PMCR_EL0.N field
(tracked per guest) and the other fields (tracked per vCPU)
to provide the value of PMCR_EL0.
No functional change intended.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231020214053.2144305-4-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Future changes to KVM's sysreg emulation will rely on having a valid PMU
instance to determine the number of implemented counters (PMCR_EL0.N).
This is earlier than when userspace is expected to modify the vPMU
device attributes, where the default is selected today.
Select the default PMU when handling KVM_ARM_VCPU_INIT such that it is
available in time for sysreg emulation.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20231020214053.2144305-3-rananta@google.com
[Oliver: rewrite changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The NSH bit, which filters event counting at EL2, is required by the
architecture if an implementation has EL2. Even though KVM doesn't
support nested virt yet, it makes no effort to hide the existence of EL2
from the ID registers. Userspace can, however, change the value of PFR0
to hide EL2. Align KVM's sysreg emulation with the architecture and make
NSH RES0 if EL2 isn't advertised. Keep in mind the bit is ignored when
constructing the backing perf event.
While at it, build the event type mask using explicit field definitions
instead of relying on ARMV8_PMU_EVTYPE_MASK. KVM probably should've been
doing this in the first place, as it avoids changes to the
aforementioned mask affecting sysreg emulation.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231019185618.3442949-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Contrary to common belief, HCR_EL2.TGE has a direct and immediate
effect on the way the EL0 physical counter is offset. Flipping
TGE from 1 to 0 while at EL2 immediately changes the way the counter
compared to the CVAL limit.
This means that we cannot directly save/restore the guest's view of
CVAL, but that we instead must treat it as if CNTPOFF didn't exist.
Only in the world switch, once we figure out that we do have CNTPOFF,
can we must the offset back and forth depending on the polarity of
TGE.
Fixes: 2b4825a869 ("KVM: arm64: timers: Use CNTPOFF_EL2 to offset the physical timer")
Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Passing a vcpu_id to kvm_vgic_inject_irq() is silly for two reasons:
- we often confuse vcpu_id and vcpu_idx
- we eventually have to convert it back to a vcpu
- we can't count
Instead, pass a vcpu pointer, which is unambiguous. A NULL vcpu
is also allowed for interrupts that are not private to a vcpu
(such as SPIs).
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230927090911.3355209-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The vCPU-scoped feature bitmap was left in place a couple of releases
ago in case the change to VM-scoped vCPU features broke anyone. Nobody
has complained and the interop between VM and vCPU bitmaps is pretty
gross. Throw it out.
Link: https://lore.kernel.org/r/20230920195036.1169791-9-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Most of the internal definitions for PMU emulation are guarded with
CONFIG_HW_PERF_EVENTS. However, this isn't enough, and leads to
these definitions leaking if CONFIG_KVM isn't enabled.
This leads to some compilation breakage in this exact configuration.
Fix it by falling back to the dummy stubs if either perf or KVM
isn't selected.
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Huang Shijie reports that, when profiling a guest from the host
with a number of events that exceeds the number of available
counters, the reported counts are wildly inaccurate. Without
the counter oversubscription, the reported counts are correct.
Their investigation indicates that upon counter rotation (which
takes place on the back of a timer interrupt), we fail to
re-apply the guest EL0 enabling, leading to the counting of host
events instead of guest events.
In order to solve this, add yet another hook between the host PMU
driver and KVM, re-applying the guest EL0 configuration if the
right conditions apply (the host is VHE, we are in interrupt
context, and we interrupted a running vcpu). This triggers a new
vcpu request which will apply the correct configuration on guest
reentry.
With this, we have the correct counts, even when the counters are
oversubscribed.
Reported-by: Huang Shijie <shijie@os.amperecomputing.com>
Suggested-by: Oliver Upton <oliver.upton@linux.dev>
Tested_by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20230809013953.7692-1-shijie@os.amperecomputing.com
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20230820090108.177817-1-maz@kernel.org
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable@vger.kernel.org
Fixes: 8e01d9a396 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Suggested-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
- Fix unprotected vcpu->pid dereference via debugfs
- Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals
- Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=EGXd
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.5' of https://github.com/kvm-x86/linux into HEAD
Common KVM changes for 6.5:
- Fix unprotected vcpu->pid dereference via debugfs
- Fix KVM_BUG() and KVM_BUG_ON() macros with 64-bit conditionals
- Refactor failure path in kvm_io_bus_unregister_dev() to simplify the code
- Misc cleanups
