Since iwl_fw_error_collect() is now always called with the sync
argument set to true, to collect data synchronously, remove the
argument from it entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.08f515513e88.I780a557743ca7f029f46a1cc75d0799542e39d83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to later add the ability to do deeper resets of the
device when it crashes, first restructure the firmware error
handling. Instead of having just a single nic_error() method
that handles all, split it:
- nic_error() just handles and prints the error itself,
- dump_error() synchronously creates an error dump, and
- sw_reset() will be called to request doing a SW reset.
This changes the architecture so that the transport is now
responsible for deciding how to do the reset, and therefore
the handling of reprobe if error occurs during reconfig
moves there, which necessitates adding a method there that
notifies the transport that the recovery was completed.
Actually introducing the model under which deeper resets can
be done will be in future patches.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.6d4f741ae907.I96a9243e7877808ed6d1bff6967c15d6c24882f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When some channel context manipulations fail, the device
is going to be restarted to try to recover. Make this go
through a real FW restart via an NMI so the transport is
aware of it and can later handle escalation, and to make
it easier to restructure the code later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.96b732029d20.I2e729f402db58a76cea620b6f62a02da49a10b48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Except for some special handling in DVM, error dump and some
message behaviour, cmd_queue_full and nic_error are equivalent
now. Unify by giving a special error type, so DVM can continue
to differentiate.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.0222183504aa.Ie29cef75fbd91b64a43619bc36bd5b29c5b9f957@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Approximately three years ago, in commit ddb6b76b6f
("iwlwifi: yoyo: support TLV-based firmware reset"), the code
was (likely erroneously) changed to no longer treat error
interrupts as firmware errors. As a result, this meant that
the fw_restart counter was only applied in case of command
queue being stuck, which never seems to happen. Also, there's
no longer any way to set the mvm->fw_restart to a value that
doesn't match exactly the module parameter behaviour.
Instead of trying to fix this, simply remove the logic that
limits the number of restarts, it's clearly unused.
However, restore the logic that restart isn't unconditional,
by checking the module parameter.
Since the "fw_error" argument to iwl_mvm_nic_restart() is now
always true (except in the "never happens" case of CMD queue
stuck), just remove it too and treat command queue stuck the
same way as everything else.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.b0489daf323c.I0cd3233b2214c5f06e059f746041b19d08647e40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that the retry loop only happens when timeouts occur
and firmware errors are different, we no longer need the
STARTING state with all the infrastructure for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.c55d73436521.I08e9f6a71d56f86872bca4d4e3048faa113a7120@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We had reverted the retry loop removal because of an issue
with PNVM loading, but that issue manifests as timeouts.
Since the retries aren't needed in other cases, only do
them when there were timeouts while starting, not other
errors.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.98201c79f66d.I5d7e12b219d533c6a77741ec5863984d35711f48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We had reverted the retry loop removal because of an issue
with PNVM loading, but that issue manifests as timeouts.
Since the retry loops aren't needed in other cases, only
do them when there were timeouts while loading, not other
errors.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.a21bf40b0fd3.I70166e460906d6d183359889d7543b9c587b7182@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to restrict the retry loops for timeouts, first
pass the error code up using ERR_PTR(). This of course
requires all existing functions to be updated accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.3fe5031d5784.I7307996c91dac69619ff9c616b8a077423fac19f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These comments have kernel-doc markup and were meant to
be handled as such, add the right /** marker to them.
Add missing entries where needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.c5c04b641479.I702b8122d307a0d9d09df038cda10be063f7f2d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For certain platforms, it may necessary to use the STEP in URM
(ultra reliable mode.) Read the necessary flags from the BIOS
(ACPI or UEFI) and indicate the chosen mode to the firmware in
the context info. Whether or not URM really was configured is
already read back later, to adjust capabilities accordingly.
Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.b30024905de3.If3c578af2c15f8005bbe71499bc4091348ed7bb0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This variable exists for the "common" (WiFi/BT) GUID, not the
WiFi-only GUID. Fix that by passing the GUID to the function.
A short-cut for the wifi-only version remains so not all code
must be updated.
However, rename the GUID defines to be clearer.
Fixes: 09b4c35d73 ("wifi: iwlwifi: mvm: Support STEP equalizer settings from BIOS.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.89a5ad921b6d.Idae95a70ff69d2ba1b610e8eced826961ce7de98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is becoming the link_id. Since this makes no difference on non-MLD
devices, just rename to link_id for all the APIs that use the common
structure.
Starting from command 9, feed the link_id to the firmware instead of the
mac id.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.f1155e713201.I753900d10e82f339cf9679ed403027d38dc1fd58@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The statistics are not synchronized with the time that we enter EMLSR.
This means that we can receive the statistic notification just after
having cleared the counters, causing us to immediately exit EMLSR again.
Fix this by checking that most of the time for the window has passed. If
that is not the case, ignore this window and wait for the next
notification.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.0eb0f2044535.Ic2af92737ccfc873f3b6c228704238ebb9f983ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to the firmware allocating the BAID, we can only install
the data structure after the BAID is valid from the firmware's
point of view. As a result, the firmware can start sending
frame release notifications to the driver immediately. This
isn't supposed to happen by protocol, since the peer STA is
not expected to use the blockack session until the AddBA has
a response. However, firmware doesn't know that, our RX path
can't know when it was, so simply don't WARN in this case but
only have a debug message.
Since the BAID comes from firmware, also use IWL_FW_CHECK()
instead of a warning for the validity check.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.4360f2b9e185.I447f9a5fc6dfdc78ec238200338e2da040ee7e61@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of differentiating only sync/async, differentiate
the type of error, and document that only reset handshake
timeout (IWL_ERR_TYPE_RESET_HS_TIMEOUT) needs sync handling.
The special sync handling is somewhat temporary, the idea
is to later split the nic_error() method into error dump,
synchronizing the dump, and SW reset methods, and the type
is mostly in order to unify command queue full handling
into that new architecture as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.aed9c9e4fac0.I2288042bec4728a75b61cb7f6ded5214bfa3ce85@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
extend TAS table support to revision 2 for getting UHB canada
enablement from BIOS and send to firmware via TAS_CONFIG cmd
based on firmware capability. While on it fixed kernel-doc for
struct iwl_tas_config_cmd_v4.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.0b1d92ad59b8.Ib80f8514a64fc2800a2a20131e730c2bd9c4c4af@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use IWL_FW_CHECK() for BAR notification size validation, improving
diagnostics with a clear error message on failure.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.913d5d476929.I8cd62f45bacc088c309b0152fc392dc2579e82e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 6b3e87cc0c ("iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD
cmd v9")
added a few bits to iwl_lari_config_change_cmd::oem_unii4_allow_bitmap
if the FW has LARI version >= 9.
But we also need to send those bits for version 8 if the FW is capable
of this feature (indicated with capability bits)
Add the FW capability bit, and set the additional bits in the cmd when
the version is 8 and the FW capability bit is set.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241226174257.dc5836f84514.I1e38f94465a36731034c94b9811de10cb6ee5921@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit ef7ddf4e2f ("iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD v12")
added a few bits to iwl_lari_config_change_cmd::chan_state_active_bitmap
if the FW has LARI version >= 12.
But we also need to send those bits for version 8-11 if the FW is capable
of this feature (indicated with capability bits)
Add the FW capability bit, and set the additional bits in the cmd when
the version is 8 and the FW capability bit is set.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241226174257.672651ad849c.I67a00d9544c48ad964f8e998ebe8c168071c3d01@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We only logged an error in the fast resume path. However, as the
hardware is being restarted it makes sense to log an error to make it
easier to understand what is happening.
Add a new error message into the normal resume path and update the
error in the fast resume path to match.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.df1e451d4928.Ibe286bc010ad7fecebba5650097e16ed22a654e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enhance the documentation for the enum iwl_nvm_channel_flags to
provide better clarity for NVM_CHANNEL_IBSS and NVM_CHANNEL_ACTIVE flags
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.d4018e62b2bd.Ie20fe3408bcc358078e3e5bf38edeb6b951c9a40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently driver requests periodic statistics after entering EMLSR.
This means that when not in EMLSR, link selection decisions will be
done based on old statistics, from the association time.
Request periodic statistics already at association instead,
Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.4ca59fe0e060.Ic46280aad4dc7087a7d6d0773b86c255133cb7d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now it neither sets the ret argument or return something else than
false.
Cleanup this function to be void and to not receive the ret argument.
This also allows to get rid of the sta_in_fw parameter in
iwl_mvm_mld_free_sta_link.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.ecebfa16c62c.Ia1cc352b871593be4f51cb3db98f9eedd5267857@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the sequence goes like this (among others):
1. flush all stations (including the AP ones) -> this will tell the
drivers to remove the stations
2. notify the driver the vif is not associated.
Which means that in between 1 and 2, the state is that the vif is
associated, but there is no AP station, which makes no sense, and may be
problematic for some drivers (for example iwlwifi)
Change the sequence to:
1. flush the TDLS stations
2. move the AP station to IEEE80211_STA_NONE
3. notify the driver about the vif being unassociated
4. flush the AP station
In order to not break other drivers, add a vif flag to indicate whether
the driver wants to new sequence or not. If the flag is not set, then
things will be done in the old sequence.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
in iwl_mvm_sta_del we call iwl_mvm_sec_key_remove_ap with link id 0,
when it might actually be something else, causing us to skip all
the keys.
Since the call to iwl_mvm_sec_key_remove_ap was mostly skipped (because
for STA mode we are not removing the ap sta immediately, but later when
the vif is set to unassocicated),
this was fine.
The other call to iwl_mvm_sec_key_remove_ap, when we actually do remove the
ap sta, was called with the right link id. So the bug didn't happen so far.
Now that mac80211 is going to change such that we can immediately
remove the ap sta, the call to iwl_mvm_sec_key_remove_ap with link id 0
will not be skipped, so no key will be removed, and then when
mac80211 eventually tells us to remove that keys, we no longer have the
sta ids for them.
Simply pass the right link id to iwl_mvm_sec_key_remove_ap.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.db7a5f551492.I79fe16a14fa0bb20751ba2526c3195fef39ef772@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This code is only relevant for older devices, that are not supporting
mld, so shouldn't be in iwl_mvm_sta_del, which is common to both pre-mld
and mld.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241224192322.a665d16a3857.I840b00a7b38f3967ec5e75ff6a85e756f4d82437@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The inverse value is stored in the table, make the documentation match the code.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/2008554.usQuhbGJ8B@devpool47.emlix.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
THe last use of il_get_single_channel_number() was removed in 2011 by
commit dd6d2a8aef ("iwlegacy: remove reset rf infrastructure")
when it was still called iwl_legacy_get_single_channel_number.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-3-linux@treblig.org
The last use of il3945_calc_db_from_ratio() was removed in 2010 by
commit ed1b6e99b5 ("iwlwifi: remove noise reporting")
when it was still called iwl3945_calc_db_from_ratio().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-2-linux@treblig.org
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
* define wiphy guard
* get TX power per link
* EHT 320 MHz channel support for mesh
ath11k
* QCA6698AQ support
ath9k
* RX inactivity detection
rtl8xxxu
* add more USB device IDs
rtw88
* add more USB device IDs
* enable USB RX aggregation and USB 3 to improve performance
rtw89
* PowerSave flow for Multi-Link Operation
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmdkbAoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuRIgf/dcjYr+eg3I7iU9qGxvEwHlDAC5CaMRwe
8+/SO6gy49xf6igleNQ2jBn/qAsJTiro6IzJwb1D6i16ax4TRUTEkTZSiYCzntKI
9Nkq59qhsRI4Vxrhp6NibUtVnjuRdSruVM5uLCccUCJ8tfq13WGhecR2pmV0TDO3
bRSza6L64XIuSmqHkuWS3Hz1YQvIvIZMeeiWoC35mtXg6ORRXpYloLtCzFn1zxoP
YPoeSfoAqIlaVwdB1DoaakU6is8oGZ0oI6zw/qaN8P7pYfqO62ATf6ZzAdwHE1dU
fow9nvwzln+BqgpdIK81QFR+XC+7LorCGSaQlYu6C0nxjSzycSrgOw==
=WIP7
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.14
Multi-Link Operation implementation continues, both in stack and in
drivers. Otherwise it has been relatively quiet.
Major changes:
cfg80211/mac80211
- define wiphy guard
- get TX power per link
- EHT 320 MHz channel support for mesh
ath11k
- QCA6698AQ support
ath9k
- RX inactivity detection
rtl8xxxu
- add more USB device IDs
rtw88
- add more USB device IDs
- enable USB RX aggregation and USB 3 to improve performance
rtw89
- PowerSave flow for Multi-Link Operation
* tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits)
wifi: wlcore: sysfs: constify 'struct bin_attribute'
wifi: brcmfmac: clarify unmodifiable headroom log message
wifi: brcmfmac: add missing header include for brcmf_dbg
wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy()
wifi: qtnfmac: fix spelling error in core.h
wifi: rtw89: phy: add dummy C2H event handler for report of TAS power
wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read()
wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc()
wifi: rtlwifi: pci: wait for firmware loading before releasing memory
wifi: rtlwifi: fix memory leaks and invalid access at probe error path
wifi: rtlwifi: destroy workqueue at rtl_deinit_core
wifi: rtlwifi: remove unused check_buddy_priv
wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2
wifi: rtw89: regd: update regulatory map to R68-R51
wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ
wifi: rtw89: disable firmware training HE GI and LTF
wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS
wifi: rtw89: ps: refactor channel info to firmware before entering PS
wifi: rtw89: ps: refactor PS flow to support MLO
wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s
...
====================
Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both struct cfg80211_wowlan_nd_match and struct cfg80211_wowlan_nd_info
pre-allocate space for channels and matches, but then may end up using
fewer that the full allocation. Shrink the associated counter
(n_channels and n_matches) after counting the results. This avoids
compile-time (and run-time) warnings from __counted_by. (The counter
member needs to be updated _before_ accessing the array index.)
Seen with coming GCC 15:
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function 'iwl_mvm_query_set_freqs':
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2877:66: warning: operation on 'match->n_channels' may be undefined [-Wsequence-point]
2877 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2885:66: warning: operation on 'match->n_channels' may be undefined [-Wsequence-point]
2885 | match->channels[match->n_channels++] =
| ~~~~~~~~~~~~~~~~~^~
drivers/net/wireless/intel/iwlwifi/mvm/d3.c: In function 'iwl_mvm_query_netdetect_reasons':
drivers/net/wireless/intel/iwlwifi/mvm/d3.c:2982:58: warning: operation on 'net_detect->n_matches' may be undefined [-Wsequence-point]
2982 | net_detect->matches[net_detect->n_matches++] = match;
| ~~~~~~~~~~~~~~~~~~~~~^~
Cc: stable@vger.kernel.org
Fixes: aa4ec06c45 ("wifi: cfg80211: use __counted_by where appropriate")
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/20240619211233.work.355-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
- avoid CSA warnings during link removal
(by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation
-----BEGIN PGP SIGNATURE-----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=qo16
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
A small set of fixes:
- avoid CSA warnings during link removal
(by changing link bitmap after remove)
- fix # of spatial streams initialisation
- fix queues getting stuck in some CSA cases
and resume failures
- fix interface address when switching monitor mode
- fix MBSS change flags 32-bit stack corruption
- more UBSAN __counted_by "fixes" ...
- fix link ID netlink validation
* tag 'wireless-2024-12-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: cfg80211: sme: init n_channels before channels[] access
wifi: mac80211: fix station NSS capability initialization order
wifi: mac80211: fix vif addr when switching from monitor to station
wifi: mac80211: fix a queue stall in certain cases of CSA
wifi: mac80211: wake the queues in case of failure in resume
wifi: cfg80211: clear link ID from bitmap during link delete after clean up
wifi: mac80211: init cnt before accessing elem in ieee80211_copy_mbssid_beacon
wifi: mac80211: fix mbss changed flags corruption on 32 bit systems
wifi: nl80211: fix NL80211_ATTR_MLO_LINK_ID off-by-one
====================
Link: https://patch.msgid.link/20241210130145.28618-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch replaces spaces with tabs in the affected source files to
adhere to the Linux kernel coding style guidelines.
This change is purely stylistic and do not affect the functionality
of the code.
Signed-off-by: Juan José Arboleda <soyjuanarbol@gmail.com>
Link: https://patch.msgid.link/715c74c74b336bed81e92e1336bd1a6ddb7b90ff.1724103043.git.soyjuanarbol@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we got an unprotected action frame with CSA and then we heard the
beacon with the CSA IE, we'll block the queues with the CSA reason
twice. Since this reason is refcounted, we won't wake up the queues
since we wake them up only once and the ref count will never reach 0.
This led to blocked queues that prevented any activity (even
disconnection wouldn't reset the queue state and the only way to recover
would be to reload the kernel module.
Fix this by not refcounting the CSA reason.
It becomes now pointless to maintain the csa_blocked_queues state.
Remove it.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 414e090bc4 ("wifi: mac80211: restrict public action ECSA frame handling")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-----BEGIN PGP SIGNATURE-----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=2Otz
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)
- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)
- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)
- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)
Resource management:
- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)
- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)
- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)
Driver binding:
- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)
- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)
- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)
- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)
- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)
- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)
Error handling:
- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)
- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)
ASPM:
- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)
- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)
Power management:
- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)
- Enable runtime power management for host bridges (Krishna chaitanya
chundru)
Power control:
- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)
- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)
- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)
- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)
- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)
Bandwidth control:
- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)
- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)
- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)
- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)
- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)
- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)
PCI device hotplug:
- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)
- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)
- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)
- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)
- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)
- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)
Virtualization:
- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)
TLP Processing Hints (TPH):
- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)
- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)
Data Object Exchange (DOE):
- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)
Endpoint framework:
- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)
- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)
- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)
- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)
- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)
- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)
- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)
- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)
- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)
Cadence PCIe controller driver:
- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)
Freescale i.MX6 PCIe controller driver:
- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)
Intel VMD host bridge driver:
- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)
MediaTek PCIe Gen3 controller driver:
- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)
- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)
Microchip PolarFlare PCIe controller driver:
- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)
NVIDIA Tegra194 PCIe controller driver:
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
Qualcomm PCIe controller driver:
- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)
- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)
- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)
- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)
- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)
- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)
- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)
- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)
Rockchip PCIe controller driver:
- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)
- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)
- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)
- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)
- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)
- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)
- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)
- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)
- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)
- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)
Synopsys DesignWare PCIe controller driver:
- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)
- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)
- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)
TI J721E PCIe driver:
- Add PCIe support for J722S SoC (Siddharth Vadapalli)
- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)
TI Keystone PCIe controller driver:
- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)
- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)
Miscellaneous:
- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)
- Fix sysfs reset_method_store() memory leak (Todd Kjos)
- Simplify pci_create_slot() (Ilpo Järvinen)
- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"
* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmc04UYRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuckgf/RV0zy8gMuzJ/cSk1GDKoOYmEwAZ4JvtW
teAKghsODDW/bng2iKnXphJyx3spZRCNuvOmfPcHsWoResX+vqrKJOaER/3159OF
68xAPZNXPRF4M693IpIUB/P3uTw/jieXPI7ftSPuUOhStca/ALwQd5Lp3kNKkVtq
HipXJwCenVS7Hd8DdHbpvYFUckRWr3tHPFlOgG3qOQOVvfRen2z9rhM14oK9rn+h
f309ATHKTbpTKNagOPYAYcyHs3zE59hlVRgRqHL7Ew0a0HI8uPJ4KK2n5W6tZJFN
swhoQolc1uXrRYlZ3Bdr7mKSIqt557kRz7NJ9ITe7KKCU0CxM/7nhQ==
=v8bS
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes incorrect code alignment.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:871:2-3: code aligned with following code on line 882.
./drivers/net/wireless/intel/ipw2x00/libipw_rx.c:886:2-3: code aligned with following code on line 900.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=11381
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241101060725.54640-1-jiapeng.chong@linux.alibaba.com
We don't have any interface anyway.
Trying to send a command after the D3_CONFIG command is also a really
bad idea.
No harm done since this function wouldn't send anything to the firmware
anyway.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.2636b358c870.I36717b4cff98eaa79182e0f3b5404f71aeeaf2f9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Those macros are currently in fw/api/binding.h, which should really not
be included in newer code, where this API is not used.
Just move it.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241028135215.48443f1c1819.I1cfe8c6c58153031d44f81edc0f8731077666355@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the NIC is dead upon resume, try to catch the error earlier and exit
earlier. We'll print less error messages and get to the same recovery
path as before: reload the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.3a18682261e5.I18f336a4537378a4c1a8537d7246cee1fc82b42c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since we no longer shut down the device in suspend, we also no longer
call iwl_mvm_mei_device_state() and this is a problem because iwlmei
expects this to be called when it runs its own suspend sequence. It
checks mei->device_down in iwl_mei_remove() which is called upon
suspend.
Fix this by telling iwlmei when we're done accessing the device.
When we'll wake up, the device should be untouched if CSME didn't use it
during the suspend time. If CSME used it, we'll notice it through the
CSR_FUNC_SCRATCH register.
Fixes: e8bb19c1d5 ("wifi: iwlwifi: support fast resume")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.525287b90af2.Ibf183824471ea5580d9276d104444e53191e6900@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This feature can be used on ax200 as well. It'll avoid to restart the
firmware upon suspend / resume flow. Doing so also avoids releasing and
re-allocating all the device related memory which makes the memory's
subsystem task easier.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.514efe0ce4c7.I60061277526302a75cadbba10452e94c54763f13@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for range_request_cmd version 15. This version adds a
testing option flag to use bad secure LTF Tx key. The command struct
itself is not changed.
Add support for responder config command version 11. This version only
adds a flag which is part of the MVM_FTM_RESP_FLAGS and does not
require any special handling.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.264826832f16.Iad4fdcd177a9c4bcb0839d3f87c793b4f83eb2c7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This will call into the OMI control path soon, and that will
require the wiphy mutex to be held. The files are removed by
mac80211 under wiphy mutex, so we must use the wiphy-locked
debugfs for them.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.c62e23392400.Ifcb652d324bc60b7144fdf277d7989bede9e54d5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support version 7 of wowlan_config_cmd and version 5 of
iwl_wowlan_info_notif
This version is mainly a cleanup of the previous version.
Two fields were removed as the device already handled this data.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.d2afdf720073.I9901c8c4ad4508135d019efa213b1430acc70746@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Allow calling iwl_mvm_get_bss_vif() without getting an error
message if multiple vifs are active etc., this is much easier
than having to check beforehand (which would be effectively
the same code as the function itself.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.a343824e2c61.Ib92534f17c63630aa2eb0604fd80dbae20077487@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is written only with wiphy and mvm mutexes held, but in
order to actually rely on that document it and add lockdep
assertions to ensure it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241028135215.a6c6aa4147cf.If7f1b30a7b92ce5e9226e8972201a20aa9905108@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
pcim_iomap_table() and pcim_iomap_regions_request_all() have been
deprecated by the PCI subsystem in commit e354bb84a4 ("PCI: Deprecate
pcim_iomap_table(), pcim_iomap_regions_request_all()").
Replace these functions with their successors, pcim_iomap() and
pcim_request_all_regions().
Link: https://lore.kernel.org/r/20241030112743.104395-7-pstanner@redhat.com
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
If more than 255 colocated APs exist for the set of all
APs found during 2.4/5 GHz scanning, then the 6 GHz scan
construction will loop forever since the loop variable
has type u8, which can never reach the number found when
that's bigger than 255, and is stored in a u32 variable.
Also move it into the loops to have a smaller scope.
Using a u32 there is fine, we limit the number of APs in
the scan list and each has a limit on the number of RNR
entries due to the frame size. With a limit of 1000 scan
results, a frame size upper bound of 4096 (really it's
more like ~2300) and a TBTT entry size of at least 11,
we get an upper bound for the number of ~372k, well in
the bounds of a u32.
Cc: stable@vger.kernel.org
Fixes: eae94cf82d ("iwlwifi: mvm: add support for 6GHz")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219375
Link: https://patch.msgid.link/20241023091744.f4baed5c08a1.I8b417148bbc8c5d11c101e1b8f5bf372e17bf2a7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Revert commit dfdfe4be18 ("wifi: iwlwifi: remove retry loops in
start"), it turns out that there's an issue with the PNVM load
notification from firmware not getting processed, that this patch
has been somewhat successfully papering over. Since this is being
reported, revert the loop removal for now.
We will later at least clean this up to only attempt to retry if
there was a timeout, but currently we don't even bubble up the
failure reason to the correct layer, only returning NULL.
Fixes: dfdfe4be18 ("wifi: iwlwifi: remove retry loops in start")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241022092212.4aa82a558a00.Ibdeff9c8f0d608bc97fc42024392ae763b6937b7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we add the vif (and its default link) in fw restart we may
override the link that already exists. We take care of this but if
link 0 is a valid MLO link, then we will re-create a default link on
mvmvif->link[0] and we'll loose the real link we had there.
In non-MLO, we need to re-create the default link upon the interface
creation, this is fine. In MLO, we'll just wait for change_vif_links()
to re-build the links.
Fixes: bf976c814c ("wifi: iwlwifi: mvm: implement link change ops")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.385bfea1b2e9.I4a127312285ccb529cc95cc4edf6fbe1e0a136ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
1. The size of the response packet is not validated.
2. The response buffer is not freed.
Resolve these issues by switching to iwl_mvm_send_cmd_status(),
which handles both size validation and frees the buffer.
Fixes: f130bb75d8 ("iwlwifi: add FW recovery flow")
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.76c73185951e.Id3b6ca82ced2081f5ee4f33c997491d0ebda83f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When starting the suspend flow, HOST_D3_START triggers an _async_
firmware dump collection for debugging purposes. The async worker
may race with suspend flow and fail to get NIC access, resulting in
the following warning:
"Timeout waiting for hardware access (CSR_GP_CNTRL 0xffffffff)"
Fix this by switching to the sync version to ensure the dump
completes before proceeding with the suspend flow, avoiding
potential race issues.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.9aae318cd593.I4b322009f39489c0b1d8893495c887870f73ed9c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mvm_send_ap_tx_power_constraint_cmd is a no-op if the link is not
active (we need to know the band etc.)
However, for the station case it will be called just before we set the
link to active (by calling iwl_mvm_link_changed with
the LINK_CONTEXT_MODIFY_ACTIVE bit set in the 'changed' flags and
active = true), so it will end up doing nothing.
Fix this by calling iwl_mvm_send_ap_tx_power_constraint_cmd before
iwl_mvm_link_changed.
Fixes: 6b82f4e119 ("wifi: iwlwifi: mvm: handle TPE advertised by AP")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.5c235fccd3f1.I2d40dea21e5547eba458565edcb4c354d094d82a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Release the link mapping resource in AP removal. This impacted devices
that do not support the MLD API (9260 and down).
On those devices, we couldn't start the AP again after the AP has been
already started and stopped.
Fixes: a8b5d4809b ("wifi: iwlwifi: mvm: Configure the link mapping for non-MLD FW")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241010140328.c54c42779882.Ied79e0d6244dc5a372e8b6ffa8ee9c6e1379ec1d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmcWl7MRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZv0Qgf/fQJKXkGJkvozrbJATkKHfHKUOphIl4Y8
/r3SlrsIL6qXZAUq5N+NH9vfUeKt5kkKG8Fc8yrJaygDLsV9v1LGiBSsb5eJ+PfM
4fCOdzPSrWG984dLwsCK8UGEzfQ1G4d6HckwubUMimK2X/m6wx/99fenjMAQvdWO
rjAJmpAkgoT0Fvf8GD3joMBKKjMFr2KT8tgbfvwpyr9cXAPZYf35+74Nl84UjHiP
rGTGN++NQuPMsYyYIPPA+eMNUnlUVyDah+UVmzsMp27YUdKBKjx23kRH6tKM/46H
dWqpqEV50xshlPaotHoFg9+4KRrxnxwvFtGTsnbvHcuSnkPBUusAvw==
=l6SI
-----END PGP SIGNATURE-----
Merge tag 'wireless-2024-10-21' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
wireless fixes for v6.12-rc5
The first set of wireless fixes for v6.12. We have been busy and have
not been able to send this earlier, so there are more fixes than
usual. The fixes are all over, both in stack and in drivers, but
nothing special really standing out.
This is one of only three -Wenum-compare-conditional warnings we get
in randconfig builds:
drivers/net/wireless/intel/iwlwifi/mvm/sta.c:4331:17: error: conditional expression between different enumeration types ('enum iwl_fw_sta_type' and 'enum iwl_sta_type') [-Werror,-Wenum-compare-conditional]
4331 | u32 type = mld ? STATION_TYPE_PEER : IWL_STA_LINK;
| ^ ~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~
This is a false positive since the code works as intended, but the
warning is otherwise sensible, so slightly rewrite it in order to
not trigger the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20241018151841.3821671-1-arnd@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The current flow in _ieee80211_set_active_links() does not align with the
operational requirements of drivers that groups multiple hardware
under a single wiphy. These drivers (e.g ath12k) rely on channel
assignment to determine the appropriate hardware for each link. Without
this, the drivers cannot correctly establish the link interface.
Currently in _ieee80211_set_active_links(), after calling
drv_change_vif_links() on the driver, the state of all connected stations
is updated via drv_change_sta_links(). This is followed by handling keys
in the links, and finally, assigning the channel to the links.
Consequently, drv_change_sta_links() prompts drivers to create the station
entry at their level and within their firmware. However, since channels
have not yet been assigned to links at this stage, drivers have not
created the necessary link interface for establishing link stations,
leading to failures in activating the links.
Therefore, re-order the logic so that after drv_change_vif_links() and
removing the old links, channels are assigned to newly added links.
Following this, the flow proceeds to station handling.
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://patch.msgid.link/20241001085034.2745669-1-quic_adisi@quicinc.com
[Johannes: fix iwlwifi to deal with the changes]
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We require a message, but the macros shouldn't require a
formatted message, a constant one can be fine. Change the
macros to support that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.96e8554cb7a2.I0e06d8fd49f86bd4e9e216fc2265c43d7e78a095@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a function for getting the error status and error
code for given error table.
Remove a static function of same purpose from mvm/d3.c
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.610a38614ce6.Iab5f795bc30ce5d08550cff1772fe051527bcb95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When resuming it can happen that the TX queue is flushed even though it
is entirely empty. This is completely fine and should not be causing an
error level log message.
Return early from reclaim in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.7c152d0820be.I3ae39a9a470f47bfe4405f2e5c30327e157eb55f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When checking if extra LTF should be disabled, we don't need to check the
the HW revision.
sband_eht_cap will be NULL if eht_capa::has_eht is false,
and that will be the case for the HWs that don't support EHT.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.78b0adbb7b50.I630a64f06ca86baecde6a2a238733b7df3cf70e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The flags_mask field is becoming reserved, and a new bandwidth
request is being added for RX OMI purposes. Support the new API
version as preparation.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.437c6573df3c.I03612cb6cf47b12038c1db11b95a554cdea714e9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It can happen that more errors occur after a firmware assertion. In that
case, having another log message after the restart has completed makes
it easier to see which errors where still part of the restart flow.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.d205dd88fb9d.Ic43a1b399f59d2ab1018ff2f9e6e3a0324692660@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Implement the prep_add_interface() callback, so that in case
EMLSR is active and an AP or a P2P interface is do to be added,
EMLSR would be blocked.
Add a delayed work, so that in case that the interface was not
eventually added, EMLSR would be unblocked after 5 seconds.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241008072037.3baf282d0a01.Ife0a929455cb13a95ab197ca765d8db777ff9d89@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to update the right link information, call the update
rate_control_rate_update() with the right link_sta, and then
pass that through to the driver's sta_rc_update() method. The
software rate control still doesn't support it, but that'll be
skipped by not having a rate control ref.
Since it now operates on a link sta, rename the driver method.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241007144851.5851b6b5fd41.Ibdf50d96afa4b761dd9b9dfd54a1147e77a75329@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
So, in order to avoid ending up with a flexible-array member in the
middle of multiple other structs, we use the `__struct_group()`
helper to create a new tagged `struct ieee80211_radiotap_header_fixed`.
This structure groups together all the members of the flexible
`struct ieee80211_radiotap_header` except the flexible array.
As a result, the array is effectively separated from the rest of the
members without modifying the memory layout of the flexible structure.
We then change the type of the middle struct members currently causing
trouble from `struct ieee80211_radiotap_header` to `struct
ieee80211_radiotap_header_fixed`.
We also want to ensure that in case new members need to be added to the
flexible structure, they are always included within the newly created
tagged struct. For this, we use `static_assert()`. This ensures that the
memory layout for both the flexible structure and the new tagged struct
is the same after any changes.
This approach avoids having to implement `struct ieee80211_radiotap_header_fixed`
as a completely separate structure, thus preventing having to maintain
two independent but basically identical structures, closing the door
to potential bugs in the future.
So, with these changes, fix the following warnings:
drivers/net/wireless/ath/wil6210/txrx.c:309:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2100.c:2521:50: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/ipw2200.h:1146:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/ipw2x00/libipw.h:595:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:34:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/marvell/libertas/radiotap.h:5:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:10:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/microchip/wilc1000/mon.c:15:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:758:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/virtual/mac80211_hwsim.c:767:42: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://patch.msgid.link/ZwBMtBZKcrzwU7l4@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
iwlegacy uses command buffers with a payload size of 320
bytes (default) or 4092 bytes (huge). The struct il_device_cmd type
describes the default buffers and there is no separate type describing
the huge buffers.
The il_enqueue_hcmd() function works with both default and huge
buffers, and has a memcpy() to the buffer payload. The size of
this copy may exceed 320 bytes when using a huge buffer, which
now results in a run-time warning:
memcpy: detected field-spanning write (size 1014) of single field "&out_cmd->cmd.payload" at drivers/net/wireless/intel/iwlegacy/common.c:3170 (size 320)
To fix this:
- Define a new struct type for huge buffers, with a correctly sized
payload field
- When using a huge buffer in il_enqueue_hcmd(), cast the command
buffer pointer to that type when looking up the payload field
Reported-by: Martin-Éric Racine <martin-eric.racine@iki.fi>
References: https://bugs.debian.org/1062421
References: https://bugzilla.kernel.org/show_bug.cgi?id=219124
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 54d9469bc5 ("fortify: Add run-time WARN for cross-field memcpy()")
Tested-by: Martin-Éric Racine <martin-eric.racine@iki.fi>
Tested-by: Brandon Nielsen <nielsenb@jetfuse.net>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/ZuIhQRi/791vlUhE@decadent.org.uk
Replace the ifdef CONFIG_PM by CONFIG_PM_SLEEP. CONFIG_PM was useful
when we had CONFIG_PM_RUNTIME but that was removed long ago.
Use PM_SLEEP consistently across the driver.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.44e47ba584de.I64f985d0405345252b76b7157291b79677abd64d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex has recently started to see active development which is good
news. rtw89 is also under active development and got several new
features. Otherwise not really anything out of ordinary.
We have one conflict in ath12k but that's easy to fix:
https://lore.kernel.org/all/20240808104348.6846e064@canb.auug.org.au/
Major changes:
mwifiex
* support for up to ten Authentication and Key Management (AKM) suites
* host MAC Sublayer Management Entity (MLME) client and AP mode support
* WPA-PSK-SHA256 AKM suite support
rtw88
* improve USB performance by aggregation
rtw89
* Wi-Fi 6 chip RTL8852BE-VT support
* WoWLAN net-detect support
* hardware encryption in unicast management frames support
* hardware rfkill support
ath12k
* DebugFS support for transmit DE stats
* Make ASPM support hardware-dependent
iwlwifi
* channel puncturing for US/CAN from UEFI
* bump FW API to 93 for BZ/SC devices
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmbYfCARHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZt+Qwf/X9oQ4sf8jV6eOV7EhoWhIHnQadvo5YBZ
ulBm8In0QGjEOVWkI7kXGabKP5jhne2lVIyP1eFfP2/td/A2yDWIuEeBfDQD6f4K
aiUGAa1gs4ZtGKJBniw/ukflSqJlR99N2qBO5T/smDm3Nw/aC522SO7BoLTpoJDQ
SuW4atFHMShXYf/vIrAA2yB9ok2yw/QM+27M9qjj6D7zzqsQxDl9wKGW+2v8KiSa
rXXbfnwfaQP21CYv5xYbEPACSRSV5Dr0TNopivWYxmm9svjLzwFN2JM2fHPxBEDh
wP6Ojp+Z32c1VbQtclLrwIQdlZ5yhU5MEDlVg5VLym9F83hv+oXTbA==
=lgVx
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
pull-request: wireless-next-2024-09-04
here's a pull request to net-next tree, more info below. Please let me know if
there are any problems.
====================
Conflicts:
drivers/net/wireless/ath/ath12k/hw.c
38055789d1 ("wifi: ath12k: use 128 bytes aligned iova in transmit path for WCN7850")
8be12629b4 ("wifi: ath12k: restore ASPM for supported hardwares only")
https://lore.kernel.org/87msldyj97.fsf@kernel.org
Link: https://patch.msgid.link/20240904153205.64C11C4CEC2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a channel ctx is assigned to a link, we set the
LINK_CONTEXT_MODIFY_RATES_INFO to indicate that the rate fields are now
valid. But then we always take the rates of 2.4 GHz regardless of actual
used band.
This is because we are getting the band from bss_conf->chanctx_conf, but
this is assigned only after drv_assign_vif_chanctx returns, so we take
the bands of 2.4 GHz.
Fix it by taking the band from the iwl_mvm_link_info::phy_ctxt instead,
as this has already assigned in this point.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240901071542.11c2d3609609.I8fa59e29b6bb38e5d06f3536d54dfb2c5d5bab11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When we de-activate a link because it started a CSA with mode=1, we want
to tell the firmware it can no longer transmit any frame for that link.
The firmware will do that on its own if the CSA indication (beacon /
action frame) was received on that same link, but with MLO, things got
more complex and the firmware can't track cross link CSA.
Tell the firmware if we de-activate a link because of CSA with mode=1 to
prevent it from transmitting, even if it is only an NDP PM=1 frame that
is part of the de-activation flow.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.4bef89d438d4.If7147a7a84054e67c05414c753d73f4e2e0e6e37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The channel number is at the same position across all versions
of the channel description struct, so move it out of the union
that versions it. Also add __packed annotations to all of the
sub-structs and the union so it's packed correctly, and fully
document the structure.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240901071542.e31623ae4201.I1ea69a8ec3d39492f39d84e31fb105b159359c28@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We forgot to release the ROC reason for ESR prevention when the remain
on channel expires.
Add this.
Fixes: a1efeb8230 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.8f8765f359cc.I16fcd6198072d422ff36dce68070aafaf011f4c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mvm_tx_skb_sta() and iwl_mvm_tx_mpdu() verify that the mvmvsta
pointer is not NULL.
It retrieves this pointer using iwl_mvm_sta_from_mac80211, which is
dereferencing the ieee80211_sta pointer.
If sta is NULL, iwl_mvm_sta_from_mac80211 will dereference a NULL
pointer.
Fix this by checking the sta pointer before retrieving the mvmsta
from it. If sta is not NULL, then mvmsta isn't either.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20240825191257.880921ce23b7.I340052d70ab6d3410724ce955eb00da10e08188f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This shouldn't happen at all, since in station mode all MMPDUs
go through the TXQ for the STA, and not this function. There
may or may not be a race in mac80211 through which this might
happen for some frames while a station is being added, but in
that case we can also just drop the frame and pretend the STA
didn't exist yet.
Also, the code is simply wrong since it uses deflink, and it's
not easy to fix it since the mvmvif->ap_sta pointer cannot be
used without the mutex, and perhaps the right link might not
even be known.
Just drop the frame at that point instead of trying to fix it
up.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.45ad105dc7fe.I6d45c82e5758395d9afb8854057ded03c7dc81d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This used to extract the timeout from the debug TLV
(FW_DBG_TRIGGER_TXQ_TIMERS), which is not in use.
Cleanup iwl_mvm_get_wd_timeout to not consider the debug TLV.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20240808232017.7a6944bc2e38.I532b4b5487c6be9203ff4db9742d7cc5b148d502@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We used to have the opmode configuring it to the trans according to the
debug tlv value (FW_DBG_TRIGGER_TXQ_TIMERS).
But this debug is not used, so trans can just have the default value
hardcoded.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.87af3f063025.I2222981ead13f6a917f2d4b116c5b94200dc9e51@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When processing a MCC update notification from the firmware, if
the firmware indicates that the regulatory configuration didn't
change, abort the flow and do not notify higher layers.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.60dd273d00e0.I985b3bc61ca4a6cac7c1d1365b5c0afba04f3031@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If both links are missing 5 beacons, we need to exit EMLSR, if only one
link misses beacons, we need to wait until 11 beacons are missed.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.b7785943a4fe.I70a459c5e7db85f398d5795ba83bb15f65d6bf9d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use the same handler for both types and just convert the old version to
the new. Drop the unused fields from the old one and fake the new
fields.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.a64ffc998569.I7d181052b1a69c331d07263f20c1e00cbc0bc891@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Note that the new API does not have the same notification ID as the
previous notification: the new notification belongs to the group 0x3.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.4ea52360b32e.Ibc25dcabd8aeadda906549482a6c77bc42fb55bb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A new version is coming up. Rename the current struct to include the
current version.
s/iwl_missed_beacons_notif/iwl_missed_beacons_notif_v4
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.b5c3a83a05ef.I698611582b5ca8395f42a535c51f7230307e2c6f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the driver handles SMPS decisions by tracking AP
capabilities, BT coexistence changes, sending necessary SMPS
frames to the AP, and updating firmware with RX chain info
using the RLC_CONFIG_CMD.
Starting with version 3 of the RLC_CONFIG_CMD, the firmware
takes over this responsibility. It now tracks SMPS, sends
frames, and configures the RLC.
In this patch:
1. Stop sending RLC_CONFIG_CMD when firmware supports RLC
offload (version 3), as rlc.rx_chain_info is not needed by
firmware, and no other field in the cmd is used.
2. Prevent the driver from forwarding any SMPS requests to
mac80211, i.e., the driver should not transmit SMPS frames
to the AP as firmware handles that.
3. Set NL80211_FEATURE_DYNAMIC_SMPS and NL80211_FEATURE_STATIC_SMPS
conditionally based on RLC version.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240808232017.45da23be1f65.I0d46db82dd990a82e8a66876fe2f5310bc9513be@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
lib80211_register_crypto_ops() and lib80211_unregister_crypto_ops() don't
modify their "struct lib80211_crypto_ops *ops" argument. So, it can be
declared as const.
Doing so, some adjustments are needed to also constify some date in
"struct lib80211_crypt_data", "struct lib80211_crypto_alg" and the
return value of lib80211_get_crypto_ops().
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c74085e02f33a11327582b19c9f51c3236e85ae2.1722839425.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add prints of the per-link MPDU counters, and change the other MPDU
counters related prints to use DL_INFO, which is already used for all
EMLSR tests anyway, instead of DL_STATS which pollutes the logs with all
the RX signal info.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Link: https://patch.msgid.link/20240729201718.02bd85837c87.I85480c9c4fab0f7a574dd69cbeafd82674146921@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have a new notification the BT profile. It contains almost nothing,
only the wifi loss information. Copy this into mvm. We still need to
iterate over the vifs / links to use this data.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.637499f3a85a.I8bf654cf5d8aa038100273876c936845ecc338f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The iwl_bt_coex_profile_notif is now being obsoleted. It'll be replaced
by a new notification coming with a non-legacy group. Rename it to avoid
confusion.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.dc29fd0d7817.I5881fce86ec8b76ae98d2948265434b8e7d860c1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The algo running in fw may take a little longer than 5 milliseconds,
(e.g. measurement on 80MHz while associated). Increase the minimum
time between measurements to 7 milliseconds.
Fixes: 830aa3e7d1 ("iwlwifi: mvm: add support for range request command version 13")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.d3f3c26e00d9.I09e951290e8a3d73f147b88166fd9a678d1d69ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The cipher pointer is not set, but is derefereced trying to set its
content, which leads to a NULL pointer dereference.
Fix it by pointing to the cipher parameter before dereferencing.
Fixes: 626be4bf99 ("wifi: iwlwifi: mvm: modify iwl_mvm_ftm_set_secured_ranging() parameters")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.24e83369f136.I80501ddcb82920561f450d00020d860e7a3f90c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the upper layer requests to cancel an ongoing scan, a race
is possible in which by the time the driver starts to handle the
upper layers scan cancel flow, the FW already completed handling
the scan request and the driver received the scan complete
notification but still did not handle the notification. In such a
case the FW will simply ignore the scan abort request coming from
the driver, no notification would arrive from the FW and the entire
abort flow would be considered a failure.
To better handle this, check the status code returned by the FW for
the scan abort command. In case the status indicates that
no scan was aborted, complete the scan abort flow with success, i.e.,
the scan was aborted, as the flow is expected to consume the scan
complete notification.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825085558.483989d3baef.I3340556a222388504c6330b333360bf77d10f9e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware needs to know what we had in the HE CAP, propagate that
setting to the firmware through the LINK command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.fef270d2995b.I328237837df30e1cb98764987eaaf8e8993e058c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
SAP version 4 uses larger Host to MEI notification queue.
Since it is unknown which SAP version is used by the CSME firmware
when the driver loads, try version 4 first. In case the CSME firmware
uses version 3, the memory allocation will fail. In this case the
driver will try again to allocate the memory for version 3.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.8372e040282f.Ia0085784e08a35159c9293f986c3d2774038f4c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The 'gl' devices are in the bz family, but they're not,
integrated, so should have their own trans config struct.
Fix that, also necessitating the removal of LTR config,
and while at it remove 0x2727 and 0x272D IDs that were
only used for test chips.
Fixes: c30a2a6478 ("wifi: iwlwifi: add a new PCI device ID for BZ device")ticket=none
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.95aed0620080.Ib9129512c95aa57acc9876bdff8b99dd41e1562c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We may want to know the value of this register for certain
debug scenarios before we overwrite it, it indicates which
parts of the chip have recently been reset.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.737e5f8bb8df.Ia3f3637ac4a0fb4b35ffd652f92eb75de652ee12@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the cases changed here, key iteration isn't done from
an RCU critical section, but rather using the wiphy lock
as protection. Therefore, just use ieee80211_iter_keys().
The link switch case can therefore also use sync commands.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.69a2d18580c1.I2148e04d4b467d0b100beac8f7e449bfaaf775a5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
* Rename iwl_dev_tx_power_cmd to iwl_dev_tx_power_cmd_v3_v8
* struct iwl_dev_tx_power_common needs to be packed. It was always the
case, but now that its size is not a multiple of 4, it becomes
meaningful.
* Move per_band data out of the common structure since it won't be
present in the new versions of the command.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240729201718.8da29a66984f.I922bdef4740d990f98cb452e858c4157bbc491c5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When the firmware crashes, we first told the op_mode and only then,
changed the transport's state. This is a problem if the op_mode's
nic_error() handler needs to send a host command: it'll see that the
transport's state still reflects that the firmware is alive.
Today, this has no consequences since we set the STATUS_FW_ERROR bit and
that will prevent sending host commands. iwl_fw_dbg_stop_restart_recording
looks at this bit to know not to send a host command for example.
To fix the hibernation, we needed to reset the firmware without having
an error and checking STATUS_FW_ERROR to see whether the firmware is
alive will no longer hold, so this change is necessary as well.
Change the flow a bit.
Change trans->state before calling the op_mode's nic_error() method and
check trans->state instead of STATUS_FW_ERROR. This will keep the
current behavior of iwl_fw_dbg_stop_restart_recording upon firmware
error, and it'll allow us to call iwl_fw_dbg_stop_restart_recording
safely even if STATUS_FW_ERROR is clear, but yet, the firmware is not
alive.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20240825191257.9d7427fbdfd7.Ia056ca57029a382c921d6f7b6a6b28fc480f2f22@changeid
[I missed this was a dependency for the hibernation fix, changed
the commit message a bit accordingly]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
