Don't error out on large MTU if XDP is multi-buf.
The ping test now tests ping with XDP and high MTU.
netdevsim doesn't actually run the prog (yet?) so
it doesn't matter if the prog was multi-buf..
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://patch.msgid.link/20250311092820.542148-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All drivers that use queue API are already converted to use
netdev instance lock. Move netdev instance lock management to
the netlink layer and drop rtnl_lock.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Mina Almasry. <almasrymina@google.com>
Link: https://patch.msgid.link/20250311144026.4154277-4-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the more esoteric helpers for netdev instance lock to
a dedicated header. This avoids growing netdevice.h to infinity
and makes rebuilding the kernel much faster (after touching
the header with the helpers).
The main netdev_lock() / netdev_unlock() functions are used
in static inlines in netdevice.h and will probably be used
most commonly, so keep them in netdevice.h.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250307183006.2312761-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the drivers that use queue management API, switch to the mode where
core stack holds the netdev instance lock. This affects the following
drivers:
- bnxt
- gve
- netdevsim
Originally I locked only start/stop, but switched to holding the
lock over all iterations to make them look atomic to the device
(feels like it should be easier to reason about).
Reviewed-by: Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For the drivers that use shaper API, switch to the mode where
core stack holds the netdev lock. This affects two drivers:
* iavf - already grabs netdev lock in ndo_open/ndo_stop, so mostly
remove these
* netdevsim - switch to _locked APIs to avoid deadlock
iavf_close diff is a bit confusing, the existing call looks like this:
iavf_close() {
netdev_lock()
..
netdev_unlock()
wait_event_timeout(down_waitqueue)
}
I change it to the following:
netdev_lock()
iavf_close() {
..
netdev_unlock()
wait_event_timeout(down_waitqueue)
netdev_lock() // reusing this lock call
}
netdev_unlock()
Since I'm reusing existing netdev_lock call, so it looks like I only
add netdev_unlock.
Cc: Saeed Mahameed <saeed@kernel.org>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250305163732.2766420-2-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netdevsim driver was experiencing NOHZ tick-stop errors during packet
transmission due to pending softirq work when calling napi_schedule().
This issue was observed when running the netconsole selftest, which
triggered the following error message:
NOHZ tick-stop error: local softirq work is pending, handler #08!!!
To fix this issue, introduce a timer that schedules napi_schedule()
from a timer context instead of calling it directly from the TX path.
Create an hrtimer for each queue and kick it from the TX path,
which then schedules napi_schedule() from the timer context.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250219-netdevsim-v3-1-811e2b8abc4c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Resetting queues while the device is down should be legal.
Allow it, test it. Ideally we'd test this with a real device
supporting devmem but I don't have access to such devices.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250206225638.1387810-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the HDS config from the ethtool state struct.
The HDS config contains just simple parameters, not state.
Having it as a separate struct will make it easier to clone / copy
and also long term potentially make it per-queue.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HDS options(tcp-data-split, hds-thresh) have dependencies between other
features like XDP. Basic dependencies are checked in the core API.
netdevsim is very useful to check basic dependencies.
The default tcp-data-split mode is UNKNOWN but netdevsim driver
returns ENABLED when ethtool dumps tcp-data-split mode.
The default value of HDS threshold is 0 and the maximum value is 1024.
ethtool shows like this.
ethtool -g eni1np1
Ring parameters for eni1np1:
Pre-set maximums:
...
HDS thresh: 1024
Current hardware settings:
...
TCP data split: on
HDS thresh: 0
ethtool -G eni1np1 tcp-data-split on hds-thresh 1024
ethtool -g eni1np1
Ring parameters for eni1np1:
Pre-set maximums:
...
HDS thresh: 1024
Current hardware settings:
...
TCP data split: on
HDS thresh: 1024
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250114142852.3364986-10-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support triggering queue reset via debugfs for an upcoming test.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add queue management API support. We need a way to reset queues
to test NAPI reordering, the queue management API provides a
handy scaffolding for that.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We'll need the code to allocate and free queues in the queue management
API, factor it out.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make nsim->rqs an array of pointers and allocate them individually
so that we can swap them out one by one.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link the NAPI instances to their configs. This will be needed to test
that NAPI config doesn't break list ordering.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
nsim_pp_hold_write() has two problems:
1) It may return with rtnl held, as found by syzbot.
2) Its return value does not propagate an error if any.
Fixes: 1580cbcbfe ("net: netdevsim: add some fake page pool use")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241216083703.1859921-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdevsim currently only set HW_TC in its hw_features, but other
features should also be present to better reflect the behavior of real
HW.
In my macsec offload testing, this ends up as HW_CSUM being missing
from hw_features, so it doesn't stick in wanted_features when offload
is turned off. Then HW_CSUM (and thus TSO, thanks to
netdev_fix_features) is not automatically turned back on when offload
is re-enabled.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/b918dc4dd76410a57f7516a855f66b0a2bd58326.1730929545.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The default ndo_get_iflink() implementation returns the current ifindex
of the netdev. But the overridden nsim_get_iflink() returns 0 if the
current nsim is not linked, breaking backwards compatibility for
userspace that depend on this behaviour.
Fix the problem by returning the current ifindex if not linked to a
peer.
Fixes: 8debcf5832 ("netdevsim: add ndo_get_iflink() implementation")
Reported-by: Yu Watanabe <watanabe.yu@gmail.com>
Suggested-by: Yu Watanabe <watanabe.yu@gmail.com>
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add NAPI support to netdevim, similar to veth.
* Add a nsim_rq rx queue structure to hold a NAPI instance and a skb
queue.
* During xmit, store the skb in the peer skb queue and schedule NAPI.
* During napi_poll(), drain the skb queue and pass up the stack.
* Add assoc between rxq and NAPI instance using netif_queue_set_napi().
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20240507163228.2066817-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon reported that ndo_change_mtu() methods were never
updated to use WRITE_ONCE(dev->mtu, new_mtu) as hinted
in commit 501a90c945 ("inet: protect against too small
mtu values.")
We read dev->mtu without holding RTNL in many places,
with READ_ONCE() annotations.
It is time to take care of ndo_change_mtu() methods
to use corresponding WRITE_ONCE()
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Simon Horman <horms@kernel.org>
Closes: https://lore.kernel.org/netdev/20240505144608.GB67882@kernel.org/
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240506102812.3025432-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add very basic page pool use so that we can exercise
the netlink uAPI in a selftest.
Page pool gets created on open, destroyed on close.
But we control allocating of a single page thru debugfs.
This page may survive past the page pool itself so that
we can test orphaned page pools.
Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Real devices should implement qstats. Devices which support
pause or FEC configuration should also report the relevant stats.
nsim was missing FEC stats completely, some of the qstats
and pause stats required toggling a debugfs knob.
Note that the tests which used pause always initialize the setting
so they shouldn't be affected by the different starting value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an implementation for ndo_get_iflink() in netdevsim that shows the
ifindex of the linked peer, if any.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Forward skbs sent from one netdevsim port to its connected netdevsim
port using dev_forward_skb, in a spirit similar to veth.
Add a tx_dropped variable to struct netdevsim, tracking the number of
skbs that could not be forwarded using dev_forward_skb().
The xmit() function accessing the peer ptr is protected by an RCU read
critical section. The rcu_read_lock() is functionally redundant as since
v5.0 all softirqs are implicitly RCU read critical sections; but it is
useful for human readers.
If another CPU is concurrently in nsim_destroy(), then it will first set
the peer ptr to NULL. This does not affect any existing readers that
dereferenced a non-NULL peer. Then, in unregister_netdevice(), there is
a synchronize_rcu() before the netdev is actually unregistered and
freed. This ensures that any readers i.e. xmit() that got a non-NULL
peer will complete before the netdev is freed.
Any readers after the RCU_INIT_POINTER() but before synchronize_rcu()
will dereference NULL, making it safe.
The codepath to nsim_destroy() and nsim_create() takes both the newly
added nsim_dev_list_lock and rtnl_lock. This makes it safe with
concurrent calls to linking two netdevsims together.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two netdevsim bus attribute to sysfs:
/sys/bus/netdevsim/link_device
/sys/bus/netdevsim/unlink_device
Writing "A M B N" to link_device will link netdevsim M in netnsid A with
netdevsim N in netnsid B.
Writing "A M" to unlink_device will unlink netdevsim M in netnsid A from
its peer, if any.
rtnl_lock is taken to ensure nothing changes during the linking.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Maciek Machnikowski <maciek@machnikowski.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
PHC gets initialized in nsim_init_netdevsim(), which
is only called if (nsim_dev_port_is_pf()).
Create a counterpart of nsim_init_netdevsim() and
move the mock_phc_destroy() there.
This fixes a crash trying to destroy netdevsim with
VFs instantiated, as caught by running the devlink.sh test:
BUG: kernel NULL pointer dereference, address: 00000000000000b8
RIP: 0010:mock_phc_destroy+0xd/0x30
Call Trace:
<TASK>
nsim_destroy+0x4a/0x70 [netdevsim]
__nsim_dev_port_del+0x47/0x70 [netdevsim]
nsim_dev_reload_destroy+0x105/0x120 [netdevsim]
nsim_drv_remove+0x2f/0xb0 [netdevsim]
device_release_driver_internal+0x1a1/0x210
bus_remove_device+0xd5/0x120
device_del+0x159/0x490
device_unregister+0x12/0x30
del_device_store+0x11a/0x1a0 [netdevsim]
kernfs_fop_write_iter+0x130/0x1d0
vfs_write+0x30b/0x4b0
ksys_write+0x69/0xf0
do_syscall_64+0xcc/0x1e0
entry_SYSCALL_64_after_hwframe+0x6f/0x77
Fixes: b63e78fca8 ("net: netdevsim: use mock PHC driver")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
W=1 builds now warn if module is built without a MODULE_DESCRIPTION().
Fill it in for the modules I maintain.
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To be able to use netdevsim for tc-testing with an offloaded tc-taprio
schedule, it needs to report a PTP clock (which it now does), and to
accept ndo_setup_tc(TC_SETUP_QDISC_TAPRIO) calls.
Since netdevsim has no packet I/O, this doesn't do anything intelligent,
it only allows taprio offload code paths to go through some level of
automated testing.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-9-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'd like to make netdevsim offload tc-taprio, but currently, this Qdisc
emits a ETHTOOL_GET_TS_INFO call to the driver to make sure that it has
a PTP clock, so that it is reasonably capable of offloading the schedule.
By using the mock PHC driver, that becomes possible.
Hardware timestamping is not necessary, and netdevsim does not support
packet I/O anyway.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20230807193324.4128292-8-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the kernel is compiled with MACsec support, add the
NETIF_F_HW_MACSEC feature to netdevsim devices and implement
macsec_ops.
To allow easy testing of failure from the device, support is limited
to 3 SecY's per netdevsim device, and 1 RXSC per SecY.
v2:
- nsim_macsec_add_secy, return -ENOSPC if secy_count isn't full but
we can't find an empty slot (Simon Horman)
- add sci_to_cpu to make sparse happy (Simon Horman)
- remove set but not used secy variable (kernel test robot and
Simon Horman)
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A summary of the flags being set for various drivers is given below.
Note that XDP_F_REDIRECT_TARGET and XDP_F_FRAG_TARGET are features
that can be turned off and on at runtime. This means that these flags
may be set and unset under RTNL lock protection by the driver. Hence,
READ_ONCE must be used by code loading the flag value.
Also, these flags are not used for synchronization against the availability
of XDP resources on a device. It is merely a hint, and hence the read
may race with the actual teardown of XDP resources on the device. This
may change in the future, e.g. operations taking a reference on the XDP
resources of the driver, and in turn inhibiting turning off this flag.
However, for now, it can only be used as a hint to check whether device
supports becoming a redirection target.
Turn 'hw-offload' feature flag on for:
- netronome (nfp)
- netdevsim.
Turn 'native' and 'zerocopy' features flags on for:
- intel (i40e, ice, ixgbe, igc)
- mellanox (mlx5).
- stmmac
- netronome (nfp)
Turn 'native' features flags on for:
- amazon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2, enetc)
- funeth
- intel (igb)
- marvell (mvneta, mvpp2, octeontx2)
- mellanox (mlx4)
- mtk_eth_soc
- qlogic (qede)
- sfc
- socionext (netsec)
- ti (cpsw)
- tap
- tsnep
- veth
- xen
- virtio_net.
Turn 'basic' (tx, pass, aborted and drop) features flags on for:
- netronome (nfp)
- cavium (thunder)
- hyperv.
Turn 'redirect_target' feature flag on for:
- amanzon (ena)
- broadcom (bnxt)
- freescale (dpaa, dpaa2)
- intel (i40e, ice, igb, ixgbe)
- ti (cpsw)
- marvell (mvneta, mvpp2)
- sfc
- socionext (netsec)
- qlogic (qede)
- mellanox (mlx5)
- tap
- veth
- virtio_net
- xen
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Co-developed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Marek Majtyka <alardam@gmail.com>
Link: https://lore.kernel.org/r/3eca9fafb308462f7edb1f58e451d59209aa07eb.1675245258.git.lorenzo@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove ndo_get_devlink_port which is no longer used alongside with the
implementations in drivers.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Benefit from the previously implemented tracking of netdev events in
devlink code and instead of calling devlink_port_type_eth_set() and
devlink_port_type_clear() to set devlink port type and link to related
netdev, use SET_NETDEV_DEVLINK_PORT() macro to assign devlink_port
pointer to netdevice which is about to be registered.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that the 32bit UP oddity is gone and 32bit uses always a sequence
count, there is no need for the fetch_irq() variants anymore.
Convert to the regular interface.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the
reader is in preemptible context and the writer side
(u64_stats_update_begin*()) runs in an interrupt context (IRQ or
softirq) then the writer can update the stats during the read operation.
This update remains undetected.
Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP
are not interrupted by a writer. 32bit-SMP remains unaffected by this
change.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Catherine Sullivan <csully@google.com>
Cc: David Awogbemila <awogbemila@google.com>
Cc: Dimitris Michailidis <dmichail@fungible.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: oss-drivers@corigine.com
Cc: stable@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When netdevsim got split into the faux bus vfconfig ended
up in the bus device (think pci_dev) which is strange because
it contains very networky not to say netdevy information.
Move it to nsim_dev, which is the driver "priv" structure
for the device.
To make sure we don't race with probe/remove take
the device lock (much like PCI).
While at it remove the NULL-checking of vfconfigs.
It appears to be pointless.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently netdevsim only supports a single queue per port, which is
insufficient for testing multi-queue TC schedulers e.g. sch_mq. Extend
the current sysfs interface so that users can create ports with multiple
queues:
$ echo "[ID] [PORT_COUNT] [NUM_QUEUES]" > /sys/bus/netdevsim/new_device
As an example, echoing "2 4 8" creates 4 ports, with 8 queues per port.
Note, this is compatible with the current interface, with default number
of queues set to 1. For example, echoing "2 4" creates 4 ports with 1
queue per port; echoing "2" simply creates 1 port with 1 queue.
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement callbacks to set/get eswitch mode value. Add helpers to check
current mode.
Instantiate VFs' net devices and devlink ports on switchdev enabling and
remove them on legacy enabling. Changing number of VFs while in
switchdev mode triggers VFs creation/deletion.
Also disable NDO API callback to set VF rate, since it's legacy API.
Switchdev API to set VF rate will be implemented in one of the next
patches.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow creation of netdevsim ports for VFs along with allocations of
corresponding net devices and devlink ports.
Add enums and helpers to distinguish PFs' ports from VFs' ports.
Ports creation/deletion debugfs API intended to be used with physical
ports only.
VFs instantiation will be done in one of the next patches.
Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All UDP tunnel port management is now routed via udp_tunnel_nic
infra directly. Remove the old callbacks.
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add minimal ethtool interface for testing ethtool pause stats.
v2: add missing static on nsim_ethtool_ops
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The UDP reuseport conflict was a little bit tricky.
The net-next code, via bpf-next, extracted the reuseport handling
into a helper so that the BPF sk lookup code could invoke it.
At the same time, the logic for reuseport handling of unconnected
sockets changed via commit efc6b6f6c3
which changed the logic to carry on the reuseport result into the
rest of the lookup loop if we do not return immediately.
This requires moving the reuseport_has_conns() logic into the callers.
While we are here, get rid of inline directives as they do not belong
in foo.c files.
The other changes were cases of more straightforward overlapping
modifications.
Signed-off-by: David S. Miller <davem@davemloft.net>
In the nsim_create(), rtnl_lock() is called before nsim_bpf_init().
If nsim_bpf_init() is failed, rtnl_unlock() should be called,
but it isn't called.
So, unbalanced locking would occur.
Fixes: e05b2d141f ("netdevsim: move netdev creation/destruction to dev probe")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add UDP tunnel port handlers to our fake driver so we can test
the core infra.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Register newly created port netdevice into net namespace
that the parent device belongs to.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the accounting is done per-namespace. However, devlink
instance is always in init_net namespace for now, so only the accounting
related to init_net is used. Limitations set using devlink resources
are only considered for init_net. nsim_devlink_net() always
returns init_net always.
Make the accounting per-device. This brings no functional change.
Per-device accounting has the same values as per-net.
For a single netdevsim instance, the behaviour is exactly the same
as before. When multiple netdevsim instances are created, each
can have different limits.
This is in prepare to implement proper devlink netns support. After
that, the devlink instance which would exist in particular netns would
account and limit that netns.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prior to the commit in the fixes tag, the resource controller in netdevsim
tracked fib entries and rules per network namespace. Restore that behavior.
Fixes: 5fc494225c ("netdevsim: create devlink instance per netdevsim instance")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch updates flow_block_cb_setup_simple() to use the flow block API.
Several drivers are also adjusted to use it.
This patch introduces the per-driver list of flow blocks to account for
blocks that are already in use.
Remove tc_block_offload alias.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most drivers do the same thing to set up the flow block callbacks, this
patch adds a helper function to do this.
This preparation patch reduces the number of changes to adapt the
existing drivers to use the flow block callback API.
This new helper function takes a flow block list per-driver, which is
set to NULL until this driver list is used.
This patch also introduces the flow_block_command and
flow_block_binder_type enumerations, which are renamed to use
FLOW_BLOCK_* in follow up patches.
There are three definitions (aliases) in order to reduce the number of
updates in this patch, which go away once drivers are fully adapted to
use this flow block API.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
