As all PCS are using the neg_mode parameter rather than the legacy
an_mode, remove the ability to use the legacy an_mode. We remove the
tests in the phylink code, unconditionally passing the PCS neg_mode
parameter to PCS methods, and remove setting the flag from drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tidPn-0040hd-2R@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We are going to implement the RX and TX paths a bit differently on
lan969x and therefore need to introduce new ops for FDMA functions:
init, deinit, xmit and poll. Assign the Sparx5 equivalents for these and
update the code throughout. Also add a 'struct net_device' argument to
the xmit() function, as we will be needing that for lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-4-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two functions: sparx5_fdma_{start(),stop()} are responsible for a
number of things, namely: allocation and initialization of FDMA buffers,
activation FDMA channels in hardware and activation of the NAPI
instance.
This patch splits the buffer allocation and initialization into init and
deinit functions, and the channel and NAPI activation into start and
stop functions. This serves two purposes: 1) the start() and stop()
functions can be reused for lan969x and 2) prepares for future MTU
change support, where we must be able to stop and start the FDMA
channels and NAPI instance, without free'ing and reallocating the FDMA
buffers.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-2-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In a previous series, we made sure that FDMA was not initialized and
started on lan969x. Now that we are going to support it, undo that
change. In addition, make sure the chip ID check is only applicable on
Sparx5, as this is a check that is only relevant on this platform.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-1-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we can check if a given port is an RGMII port, use it in the
following cases:
- To set RGMII PHY modes for RGMII port devices.
- To avoid checking for a SerDes node in the devicetree, when the port
is an RGMII port.
- To bail out of sparx5_port_init() when the common configuration is
done.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Tested-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241220-sparx5-lan969x-switch-driver-4-v5-3-fa8ba5dff732@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The lan969x device contains two RGMII port interfaces, sitting at port
28 and 29. Add function: is_port_rgmii() to the match data ops, that
checks if a given port is an RGMII port or not. For Sparx5, this
function always returns false.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Tested-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241220-sparx5-lan969x-switch-driver-4-v5-2-fa8ba5dff732@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The FDMA handler is responsible for scheduling a NAPI poll, which will
eventually fetch RX packets from the FDMA queue. Currently, the FDMA
handler is run in a threaded context. For some reason, this kills
performance. Admittedly, I did not do a thorough investigation to see
exactly what causes the issue, however, I noticed that in the other
driver utilizing the same FDMA engine, we run the FDMA handler in hard
IRQ context.
Fix this performance issue, by running the FDMA handler in hard IRQ
context, not deferring any work to a thread.
Prior to this change, the RX UDP performance was:
Interval Transfer Bitrate Jitter
0.00-10.20 sec 44.6 MBytes 36.7 Mbits/sec 0.027 ms
After this change, the rx UDP performance is:
Interval Transfer Bitrate Jitter
0.00-9.12 sec 1.01 GBytes 953 Mbits/sec 0.020 ms
Fixes: 10615907e9 ("net: sparx5: switchdev: adding frame DMA functionality")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Depmod reports a cyclic dependency between modules sparx5-switch.ko and
lan969x-switch.ko:
depmod: ERROR: Cycle detected: lan969x_switch -> sparx5_switch -> lan969x_switch
depmod: ERROR: Found 2 modules in dependency cycles!
make[2]: *** [scripts/Makefile.modinst:132: depmod] Error 1
make: *** [Makefile:224: __sub-make] Error 2
This makes sense, as they both require symbols from each other.
Fix this by compiling lan969x support into the sparx5-switch.ko module.
In order to do this, in a sensible way, we move the lan969x/ dir into
the sparx5/ dir and do some code cleanup of code that is no longer
required.
After this patch, depmod will no longer complain, as lan969x support is
compiled into the sparx5-swicth.ko module, and can no longer be compiled
as a standalone module.
Fixes: 98a0111960 ("net: sparx5: add compatible string for lan969x")
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The is_sparx5() check was introduced in an earlier series, to make sure
the sparx5_vcap_init() was not executed on lan969x, as it was not
implemented there yet. Now that it is, remove that check.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In preparation for lan969x VCAP support, add the following three new
VCAP constants to match data:
- vcaps_cfg (contains configuration data for each VCAP).
- vcaps (contains auto-generated information about VCAP keys and
actions).
- vcap_stats: (contains auto-generated string names of all the keys
and actions)
Add these constants to the Sparx5 match data constants and use them to
initialize the VCAP's in sparx5_vcap_init().
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lan969x supports a number of different features, depending on the
target. Add new field sparx5->features and initialize the features based
on the target. Also add the function sparx5_has_feature() and use it
throughout. For now, we only need to handle features: PSFP and PTP -
more will come in the future.
[1] https://www.microchip.com/en-us/product/lan9698
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-15-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add lan9691-switch compatible string to mchp_sparx5_match. Guard it with
IS_ENABLED(CONFIG_LAN969X_SWITCH) to make sure Sparx5 can be compiled on
its own.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-14-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the is_sparx5() macro (introduced in earlier series [1]), in places
where we need to handle things a bit differently on lan969x.
These places are:
- in sparx5_dsm_calendar_update() we need to switch the calendar
from a to b on lan969x.
- in sparx5_start() we need to make sure the HSCH_SYS_CLK_PER
register is only touched on Sparx5.
- in sparx5_start() we need to disable VCAP and FDMA for lan969x
(will come in later series).
- in sparx5_mirror_port_get() we must make sure the
ANA_AC_PROBE_PORT_CFG1 register is only read on Sparx5.
- sparx5_netdev.c and sparx5_packet.c we need to use different IFH
(Internal Frame Header) offsets for lan969x.
- in sparx5_port_fifo_sz() we must bail out on lan969x.
- in sparx5_port_config_low_set() we must configure the phase
detection registers.
- in sparx5_port_config() and sparx5_port_init() we must do some
additional configuration of the port devices.
- in sparx5_dwrr_conf_set() we must derive the scheduling layer
[1] https://lore.kernel.org/netdev/20241004-b4-sparx5-lan969x-switch-driver-v2-8-d3290f581663@microchip.com/
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-12-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for lan969x, add lan969x targets to
sparx5_target_chiptype and set the core clock frequency for these
throughout. Lan969x only supports a core clock frequency of 328MHz.
Also, set the policer update internal (pol_upd_int) matching the 328 MHz
frequency of the lan969x targets.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/20241024-sparx5-lan969x-switch-driver-2-v2-1-a0b5fae88a0f@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Internal ports and PGID's are both defined relative to the number of
front ports on Sparx5. This will not work on lan969x. Instead make them
offsets to the number of front ports and add two helpers to retrieve
them. Use the helpers throughout.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We dont want to ops out each time a function needs to do some platform
specifics. In particular we have a few places, where it would be
convenient to just branch out on the platform type. Add the function
is_sparx5() and, initially, use it for:
- register writes that should only be done on Sparx5 (QSYS_CAL_CTRL,
CLKGEN_LCPLL1_CORE_CLK).
- function calls that should only be done on Sparx5
(ethtool_op_get_ts_info())
- register writes that are chip-exclusive (MASK_CFG1/2, PGID_CFG1/2,
these are replicated for n_ports >32 on Sparx5).
The is_sparx5() function simply checks the target chip type, to
determine if this is a Sparx5 SKU or not.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The DSM (Disassembler) calendar grants each port access to internal
busses. The configuration of the calendar is done differently on Sparx5
and lan969x. Therefore ops out the function that calculates the
calendar.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The PTP registers are located in two different register targets on
Sparx5 and lan969x. We can't handle this with the register macros, so
ops out the handler.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Port muxing is configured based on the supported port modes. As these
modes can differ on Sparx5 and lan969x we ops out the port muxing
function.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add getters for getting values in arrays: sdlb_groups and
sparx5_hsch_max_group_rate and ops out the getters, as these arrays will
differ on lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The chip port device index and mode bit can be obtained using the port
number. However the mapping of port number to chip device index and
mode bit differs on Sparx5 and lan969x. Therefore ops out the function.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new struct sparx5_ops, containing functions that needs to be
different as the implementation differs on Sparx5 and lan969x. Initially
we add functions for checking the port type (2g5, 5g, 10g or 25g) based
on the port number. Update the code to use the ops instead of the
platform specific functions.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we have indentified all the chip constants, update the use of
them where a symbol is not defined for the constant.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now that we have indentified all the chip constants, update the use of
them where a symbol is already defined for the constant.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new struct sparx5_consts, containing all the chip constants that are
known to be different for Sparx5 and lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The register macros are used to read and write to the switch registers.
The registers are largely the same on Sparx5 and lan969x, however in some
cases they differ. The differences can be one or more of the following:
target size, register address, register count, group address, group
count, group size, field position, field size.
In order to handle these differences, we introduce a new indirection
layer, that defines and maps them to corresponding values, based on the
platform. As the register macro arguments can now be non-constants, we
also add non-constant variants of FIELD_GET and FIELD_PREP.
Since the indirection layer contributes to longer macros, we have
changed the formatting of them slightly, to adhere to a 80 character
limit, and added a comment if a macro is platform-specific.
With these additions, we can reuse all the existing macros for
lan969x.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In preparation for lan969x, add support for private match data. This
will be needed for abstracting away differences between the Sparx5 and
lan969x platforms. We initially add values for: iomap, iomap size and
ioranges. Update the use of these throughout.
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After commit 0edb555a65 ("platform: Make platform_driver::remove()
return void") .remove() is (again) the right callback to implement for
platform drivers.
Convert all platform drivers below drivers/net/ethernet to use
.remove(), with the eventual goal to drop struct
platform_driver::remove_new(). As .remove() and .remove_new() have the
same prototypes, conversion is done by just changing the structure
member name in the driver initializer.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/18f7c585a1a8a8ac8b03a2fca7de19bd5c52ac2b.1727949050.git.u.kleine-koenig@baylibre.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for new tc matchall rules, we add a bit of bookkeeping
code to keep track of them. The rules are identified by the cookie
passed from the tc stack.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both registers used when doing manual injection or fdma injection are
shared between all the net devices of the switch. It was noticed that
when having two process which each of them trying to inject frames on
different ethernet ports, that the HW started to behave strange, by
sending out more frames then expected. When doing fdma injection it is
required to set the frame in the DCB and then make sure that the next
pointer of the last DCB is invalid. But because there is no locks for
this, then easily this pointer between the DCB can be broken and then it
would create a loop of DCBs. And that means that the HW will
continuously transmit these frames in a loop. Until the SW will break
this loop.
Therefore to fix this issue, add a spin lock for when accessing the
registers for manual or fdma injection.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() is renamed to .remove().
Trivially convert these drivers from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update Sparx5's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EZ-00EaGF-6F@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds a list that is used to collect the templates that are active on a
port.
This allows the template creation to change the port configuration
and the template destruction to change it back.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds the ES0 VCAP port keyset configuration for Sparx5.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add registers needed for PSFP. This patch also renames a single
register, shortening its name (SYS_CLK_PER_100PS). Uses have been update
accordingly.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides the VCAP model for the Sparx5 ES2 (Egress Stage 2) VCAP.
This VCAP provides tagging and remarking functionality
This also renames a VCAP keyfield: VCAP_KF_MIRROR_ENA becomes
VCAP_KF_MIRROR_PROBE, as the first name was caused by a mistake in the
model transformation.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is an issue with the checking of the return value of
'of_get_mac_address', which returns 0 on success and negative value on
failure. The driver interpretated the result the opposite way. Therefore
if there was a MAC address defined in the DT, then the driver was
generating a random MAC address otherwise it would use address 0.
Fix this by checking correctly the return value of 'of_get_mac_address'
Fixes: b74ef9f9cb ("net: sparx5: Do not use mac_addr uninitialized in mchp_sparx5_probe()")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mchp_sparx5_probe() won't destroy workqueue created by
create_singlethread_workqueue() in sparx5_start() when later
inits failed. Add destroy_workqueue in the cleanup_ports case,
also add it in mchp_sparx5_remove()
Fixes: b37a1bae74 ("net: sparx5: add mactable support")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221203070259.19560-1-linqiheng@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a debugFS root folder for Sparx5 and add a vcap folder underneath with
the VCAP instances and the ports
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sparx_stats_init() calls create_singlethread_workqueue() and not
checked the ret value, which may return NULL. And a null-ptr-deref may
happen:
sparx_stats_init()
create_singlethread_workqueue() # failed, sparx5->stats_queue is NULL
queue_delayed_work()
queue_delayed_work_on()
__queue_delayed_work() # warning here, but continue
__queue_work() # access wq->flags, null-ptr-deref
Check the ret value and return -ENOMEM if it is NULL. So as
sparx5_start().
Fixes: af4b11022e ("net: sparx5: add ethtool configuration and statistics support")
Fixes: b37a1bae74 ("net: sparx5: add mactable support")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This provides the initial VCAP API framework and Sparx5 specific VCAP
implementation.
When the Sparx5 Switchdev driver is initialized it will also initialize its
VCAP module, and this hooks up the concrete Sparx5 VCAP model to the VCAP
API, so that the VCAP API knows what VCAP instances are available.
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for offloading tbf qdisc to sparx5 qdisc.
The tbf qdisc makes it possible to attach a shaper on traffic egressing
from a port or a queue. Per-port tbf qdiscs are attached as a root qdisc
directly and queue tbf qdiscs are attached to one of the classes of a
parent qdisc (such as mqprio).
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All multicast should be forwarded to mrouter ports. Mrouter ports must
therefore be part of all active multicast groups, and override flooding
from being disabled.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Keep track of all mdb entries in software for easy access.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PGID (Port Group ID) table holds port masks
for different purposes. The first 72 are reserved
for port destination masks, flood masks, and CPU
forwarding. The rest are shared between multicast,
link aggregation, and virtualization profiles. The
GLAG area is reserved to not be used by anything
else, since it is a subset of the MCAST area.
The arbiter keeps track of which entries are in
use. You can ask for a free ID or give back one
you are done using.
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When doing 2-step timestamping the HW will generate an interrupt when it
managed to timestamp a frame. It is the SW responsibility to read it
from the FIFO.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sparx5 has 3 PHC. Enable each of them, for now all the
timestamping is happening on the first PHC.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the registers that will be used to configure the PHC in the HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
