torvalds/linux
torvalds/linux
2
0
Fork 0
mirror of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2025-09-04 20:19:47 +08:00
Code
1,338,410 Commits 2 Branches 898 Tags 3.4 GiB
0d60fd5032
Commit Graph

687 Commits

Author SHA1 Message Date
Fritz Koenig
34acbac089 Documentation: media: Fix v4l2_av1_segmentation table formatting 
Fix incorrect formatting.

Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: added missing commit message]
 2024-08-09 07:56:37 +02:00
Sakari Ailus
677126b274 media: Documentation: Fix spelling of "blanking" 
"Blanking" should be spelled as such, not "balanking". Fix it.

Reported-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-08-09 07:56:37 +02:00
Hans Verkuil
613f21505b media: cec: core: add new CEC_MSG_FL_REPLY_VENDOR_ID flag 
If this flag is set, then the reply is expected to consist of
the CEC_MSG_VENDOR_COMMAND_WITH_ID opcode followed by the Vendor ID (as
used in bytes 1-4 of the message), followed by the struct cec_msg reply
field.

Note that this assumes that the byte after the Vendor ID is a
vendor-specific opcode.

This flag makes it easier to wait for replies to vendor commands,
using the same CEC framework support for waiting for regular replies.

Support for this flag is indicated by setting the new
CEC_CAP_REPLY_VENDOR_ID capability.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
 2024-08-05 09:38:46 +02:00
Jean-Michel Hautbois
914f896187 media: v4l: Fix missing tabular column hint for Y14P format 
The original patch added two columns in the flat-table of Luma-Only
Image Formats, without updating hints to latex: above it.  This results
in wrong column count in the output of Sphinx's latex builder.

Fix it.

Reported-by: Akira Yokosawa <akiyks@gmail.com>
Closes: https://lore.kernel.org/linux-media/bdbc27ba-5098-49fb-aabf-753c81361cc7@gmail.com/
Fixes: adb1d4655e ("media: v4l: Add V4L2-PIX-FMT-Y14P format")
Cc: stable@vger.kernel.org # for v6.10
Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@yoseli.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-07-30 08:36:29 +02:00
Alyssa Ross
0a8e4dc1d3 Documentation: ioctl: document 0x07 ioctl code 
It looks like this was supposed to be documented when VSOCK was
added[1], but it got lost in later submissions.

Link: https://lore.kernel.org/20130109000024.3719.71468.stgit@promb-2n-dhcp175.eng.vmware.com/#Z31Documentation:ioctl:ioctl-number.txt [1]
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240725171120.12226-2-hi@alyssa.is
 2024-07-29 15:25:03 -06:00
Linus Torvalds
9fa23750c6 Landlock updates for v6.11-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZpt8WhAcbWljQGRpZ2lr
 b2QubmV0AAoJEOXj0OiMgvbS5nwA/RFq0kZqGa1a4cUAKZqQPI7Q2tvhqqkY3ikc
 Px7Psf2jAP93zTvcFyPOe7tk2ATosc8vfM5rAapxdrAnt8N4nHa9Aw==
 =QucM
 -----END PGP SIGNATURE-----

Merge tag 'landlock-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux

Pull landlock updates from Mickaël Salaün:
 "This simplifies code and improves documentation"

* tag 'landlock-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Various documentation improvements
  landlock: Clarify documentation for struct landlock_ruleset_attr
  landlock: Use bit-fields for storing handled layer access masks
 2024-07-20 11:41:52 -07:00
Linus Torvalds
acc5965b9f Char/Misc and other driver changes for 6.11-rc1 
Here is the "big" set of char/misc and other driver subsystem changes
 for 6.11-rc1.  Nothing major in here, just loads of new drivers and
 updates.  Included in here are:
   - IIO api updates and new drivers added
   - wait_interruptable_timeout() api cleanups for some drivers
   - MODULE_DESCRIPTION() additions for loads of drivers
   - parport out-of-bounds fix
   - interconnect driver updates and additions
   - mhi driver updates and additions
   - w1 driver fixes
   - binder speedups and fixes
   - eeprom driver updates
   - coresight driver updates
   - counter driver update
   - new misc driver additions
   - other minor api updates
 
 All of these, EXCEPT for the final Kconfig build fix for 32bit systems,
 have been in linux-next for a while with no reported issues.  The
 Kconfig fixup went in 29 hours ago, so might have missed the latest
 linux-next, but was acked by everyone involved.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZppR4w8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykwoQCeIaW3nbOiNTmOupvEnZwrN3yVNs8An3Q5L+Br
 1LpTASaU6A8pN81Z1m5g
 =6U1z
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc and other driver updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystem changes
  for 6.11-rc1. Nothing major in here, just loads of new drivers and
  updates. Included in here are:

   - IIO api updates and new drivers added

   - wait_interruptable_timeout() api cleanups for some drivers

   - MODULE_DESCRIPTION() additions for loads of drivers

   - parport out-of-bounds fix

   - interconnect driver updates and additions

   - mhi driver updates and additions

   - w1 driver fixes

   - binder speedups and fixes

   - eeprom driver updates

   - coresight driver updates

   - counter driver update

   - new misc driver additions

   - other minor api updates

  All of these, EXCEPT for the final Kconfig build fix for 32bit
  systems, have been in linux-next for a while with no reported issues.
  The Kconfig fixup went in 29 hours ago, so might have missed the
  latest linux-next, but was acked by everyone involved"

* tag 'char-misc-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (330 commits)
  misc: Kconfig: exclude mrvl-cn10k-dpi compilation for 32-bit systems
  misc: delete Makefile.rej
  binder: fix hang of unregistered readers
  misc: Kconfig: add a new dependency for MARVELL_CN10K_DPI
  virtio: add missing MODULE_DESCRIPTION() macro
  agp: uninorth: add missing MODULE_DESCRIPTION() macro
  spmi: add missing MODULE_DESCRIPTION() macros
  dev/parport: fix the array out-of-bounds risk
  samples: configfs: add missing MODULE_DESCRIPTION() macro
  misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver
  misc: keba: Fix missing AUXILIARY_BUS dependency
  slimbus: Fix struct and documentation alignment in stream.c
  MAINTAINERS: CC dri-devel list on Qualcomm FastRPC patches
  misc: fastrpc: use coherent pool for untranslated Compute Banks
  misc: fastrpc: support complete DMA pool access to the DSP
  misc: fastrpc: add missing MODULE_DESCRIPTION() macro
  misc: fastrpc: Add missing dev_err newlines
  misc: fastrpc: Use memdup_user()
  nvmem: core: Implement force_ro sysfs attribute
  nvmem: Use sysfs_emit() for type attribute
  ...
 2024-07-19 15:55:08 -07:00
Linus Torvalds
ebcfbf02ab IOMMU Updates for Linux v6.11 
- Core:
   * Support for the "ats-supported" device-tree property.
 
   * Removal of the 'ops' field from 'struct iommu_fwspec'.
 
   * Introduction of iommu_paging_domain_alloc() and partial conversion
     of existing users.
 
   * Introduce 'struct iommu_attach_handle' and provide corresponding
     IOMMU interfaces which will be used by the IOMMUFD subsystem.
 
   * Remove stale documentation.
 
   * Add missing MODULE_DESCRIPTION() macro.
 
   * Misc cleanups.
 
 - Allwinner Sun50i:
   * Ensure bypass mode is disabled on H616 SoCs.
 
   * Ensure page-tables are allocated below 4GiB for the 32-bit
     page-table walker.
 
   * Add new device-tree compatible strings.
 
 - AMD Vi:
   * Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
 
 - Arm SMMUv2:
   * Print much more useful information on context faults.
 
   * Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n.
 
   * Add new Qualcomm device-tree bindings.
 
 - Arm SMMUv3:
   * Support for hardware update of access/dirty bits and reporting via
     IOMMUFD.
 
   * More driver rework from Jason, this time updating the PASID/SVA support
     to prepare for full IOMMUFD support.
 
   * Add missing MODULE_DESCRIPTION() macro.
 
   * Minor fixes and cleanups.
 
 - NVIDIA Tegra:
 
   * Fix for benign fwspec initialisation issue exposed by rework on the
     core branch.
 
 - Intel VT-d:
 
   * Use try_cmpxchg64() instead of cmpxchg64() when updating pte.
 
   * Use READ_ONCE() to read volatile descriptor status.
 
   * Remove support for handling Execute-Requested requests.
 
   * Avoid calling iommu_domain_alloc().
 
   * Minor fixes and refactoring.
 
 - Qualcomm MSM:
 
   * Updates to the device-tree bindings.
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmaZTqMQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNApdB/wL2gW7ANJN3KDrOiWdq06P9fuzxbuiAegI
 aKGH+aT05kJjLBXpAE5K9Bas0RbgN8iIB4TITDR9jyLnMOlTP3poy0fvB8y27q00
 /WkQ7yVPkZc58ySdEOGH/EbuQkiXcD1YTjTGWP9071xzbWTDbsYN0smfbvvB9LgI
 56KhdcUtB0QsqhqBzyyznHJLFdpVvDpbkiAFDXJfor7SNOOtV9a4Ect6IYteaYKz
 S6+DWDEfUs+fHTEKEZ9sZVA745f2zPkT/YHY8vjLOEukWN07+3/2AKTra19DIgqF
 HCGitRyZjOut1fg8sLn0SUliCKe/G/bHlwSbHnxJQ73b91YDvpzD
 =xvLD
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux

Pull iommu updates from Will Deacon:
 "Core:

   - Support for the "ats-supported" device-tree property

   - Removal of the 'ops' field from 'struct iommu_fwspec'

   - Introduction of iommu_paging_domain_alloc() and partial conversion
     of existing users

   - Introduce 'struct iommu_attach_handle' and provide corresponding
     IOMMU interfaces which will be used by the IOMMUFD subsystem

   - Remove stale documentation

   - Add missing MODULE_DESCRIPTION() macro

   - Misc cleanups

  Allwinner Sun50i:

   - Ensure bypass mode is disabled on H616 SoCs

   - Ensure page-tables are allocated below 4GiB for the 32-bit
     page-table walker

   - Add new device-tree compatible strings

  AMD Vi:

   - Use try_cmpxchg64() instead of cmpxchg64() when updating pte

  Arm SMMUv2:

   - Print much more useful information on context faults

   - Fix Qualcomm TBU probing when CONFIG_ARM_SMMU_QCOM_DEBUG=n

   - Add new Qualcomm device-tree bindings

  Arm SMMUv3:

   - Support for hardware update of access/dirty bits and reporting via
     IOMMUFD

   - More driver rework from Jason, this time updating the PASID/SVA
     support to prepare for full IOMMUFD support

   - Add missing MODULE_DESCRIPTION() macro

   - Minor fixes and cleanups

  NVIDIA Tegra:

   - Fix for benign fwspec initialisation issue exposed by rework on the
     core branch

  Intel VT-d:

   - Use try_cmpxchg64() instead of cmpxchg64() when updating pte

   - Use READ_ONCE() to read volatile descriptor status

   - Remove support for handling Execute-Requested requests

   - Avoid calling iommu_domain_alloc()

   - Minor fixes and refactoring

  Qualcomm MSM:

   - Updates to the device-tree bindings"

* tag 'iommu-updates-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (72 commits)
  iommu/tegra-smmu: Pass correct fwnode to iommu_fwspec_init()
  iommu/vt-d: Fix identity map bounds in si_domain_init()
  iommu: Move IOMMU_DIRTY_NO_CLEAR define
  dt-bindings: iommu: Convert msm,iommu-v0 to yaml
  iommu/vt-d: Fix aligned pages in calculate_psi_aligned_address()
  iommu/vt-d: Limit max address mask to MAX_AGAW_PFN_WIDTH
  docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst
  arm64: dts: fvp: Enable PCIe ATS for Base RevC FVP
  iommu/of: Support ats-supported device-tree property
  dt-bindings: PCI: generic: Add ats-supported property
  iommu: Remove iommu_fwspec ops
  OF: Simplify of_iommu_configure()
  ACPI: Retire acpi_iommu_fwspec_ops()
  iommu: Resolve fwspec ops automatically
  iommu/mediatek-v1: Clean up redundant fwspec checks
  RDMA/usnic: Use iommu_paging_domain_alloc()
  wifi: ath11k: Use iommu_paging_domain_alloc()
  wifi: ath10k: Use iommu_paging_domain_alloc()
  drm/msm: Use iommu_paging_domain_alloc()
  vhost-vdpa: Use iommu_paging_domain_alloc()
  ...
 2024-07-19 09:59:58 -07:00
Linus Torvalds
cf05e93af4 Nothing hugely exciting happening in the documentation tree this time 
around, mostly more of the usual:
 
 - More Spanish, Italian, and Chinese translations
 
 - A new script, scripts/checktransupdate.py, can be used to see which
   commits have touched an (English) document since a given translation was
   last updated.
 
 - A couple of "best practices" suggestions (on Link: tags and off-list
   discussions) that were not entirely at consensus level, but I concluded
   they were close enough to accept.
 
 - Some nice cleanups removing documentation for kernel parameters that have
   not been recognized for ... a long time.
 
 ...along with the usual updates, typo fixes, and such.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmaZbLMPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5Y7PkH/jk1LverE9XOXZO5Uq+eEwWlNI2khjQ0hI+M
 b0GZlIfeHsted0I8CsYapbehhqve700QJQ8/dmst9jPEwiQq9omSNp8ux/mpIvk+
 OjeCLoApZ1slYj9HeiDkwuLDw5o0bKOep6fmrlnnc2uJezqBbjSLmUgocqfCnZb1
 fHikvSP0McKjffei76+KH1PYK8BmJwredsHvmfehLJpETHQhe11tO3byPM48iLcy
 mybECacqB8zfy7wkvVTWhd+QFkT7x+BE4g/Z07L8z4m9HRxmJbV6EJF1GPlpDJWZ
 TV0u86cOAlpMeUy44pfUnej6E9ntafeaHmX7CJpcgskh3h4J/qc=
 =uk19
 -----END PGP SIGNATURE-----

Merge tag 'docs-6.11' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "Nothing hugely exciting happening in the documentation tree this time
  around, mostly more of the usual:

   - More Spanish, Italian, and Chinese translations

   - A new script, scripts/checktransupdate.py, can be used to see which
     commits have touched an (English) document since a given
     translation was last updated.

   - A couple of "best practices" suggestions (on Link: tags and
     off-list discussions) that were not entirely at consensus level,
     but I concluded they were close enough to accept.

   - Some nice cleanups removing documentation for kernel parameters
     that have not been recognized for ... a long time.

  ...along with the usual updates, typo fixes, and such"

* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
  Documentation: Document user_events ioctl code
  docs/pinctrl: fix typo in mapping example
  docs: maintainer: discourage taking conversations off-list
  docs: driver-model: platform: update the definition of platform_driver
  docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
  writing_musb_glue_layer.rst: Fix broken URL
  zh_CN/admin-guide: one typo fix
  docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
  Documentation: add reference from dynamic debug to loglevel kernel params
  Documentation: best practices for using Link trailers
  Documentation: fix links to mailing list services
  Documentation: exception-tables.rst: Fix the wrong steps referenced
  docs/zh_CN: add process/researcher-guidelines Chinese translation
  Documentation/tools/rv: fix document header
  docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
  docs/admin-guide/mm: correct typo 'quired' to 'queried'
  Add libps2 to the input section of driver-api
  Docs/mm/index: move allocation profiling document to unsorted documents chapter
  Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
  Docs/mm/index: Remove 'Memory Management Guide' chapter marker
  ...
 2024-07-18 15:54:16 -07:00
Günther Noack
f4b89d8ce5
landlock: Various documentation improvements 
* Fix some typos, incomplete or confusing phrases.
* Split paragraphs where appropriate.
* List the same error code multiple times,
  if it has multiple possible causes.
* Bring wording closer to the man page wording,
  which has undergone more thorough review
  (esp. for LANDLOCK_ACCESS_FS_WRITE_FILE).
* Small semantic clarifications
  * Call the ephemeral port range "ephemeral"
  * Clarify reasons for EFAULT in landlock_add_rule()
  * Clarify @rule_type doc for landlock_add_rule()

This is a collection of small fixes which I collected when preparing the
corresponding man pages [1].

Cc: Alejandro Colomar <alx@kernel.org>
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Link: https://lore.kernel.org/r/20240715155554.2791018-1-gnoack@google.com [1]
Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240715160328.2792835-2-gnoack@google.com
[mic: Add label to link, fix formatting spotted by make htmldocs,
synchronize userspace-api documentation's date]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
 2024-07-18 08:27:47 +02:00
Linus Torvalds
b1bc554e00 media updates for v6.11-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmaXfCQACgkQCF8+vY7k
 4RWuBg/+NRAVuzYW3AQPIaggajTGHfkk6WCTCVgQQZFCDqphS6YtgfXUJ8qO5YXk
 ZieGu+g2081BFehzcZxcaSo9pFWyqX1fjUU2sjFwRDSl9NRctsjvKE9J1DVKCsMW
 QU5yOYyBJmoVugj4YCH7Yga8OElZAWperxJidV4AmFkX93OwZDZl+wNKuSTmG/lX
 ju+Z6yzv0DN0WvgL8+LlZ2k5tpx+kAld07FFwQM54MPI9CBWyQjogGyro/1S6ymh
 WAbwbEMCvGSvGhi4issMMOK2mpmh2EAKCXBMWF5bXNOLuFWrU9TtCBr6AITKDvn7
 btQNpa8GApO+GehEQtWOX5WgZp2ypwCrMUtiwftPOtF4Z8Tl7MJfn4u6wWCxj4cy
 67HbOgWRZQRIzyUSF8vay6PeMrh8jYi+unWuOxGpnzilno1nV2hTzh4n1we15qIn
 8pnNSbtgrJCvrIgtATYjP1FWgjBxwuNIpFGxo2ly+hgbu6COLZFfg0Oju3FBdOF1
 ZxGkp1SaxcKeuFa6kbATj7y2dAjtre8drB9RfJY1C97Ta+C9ws4jBytVHbceA7u+
 GJfAis2CEStLPpe3ND9n0ekeB/qSPcgGC2HLQR7L1u30Kx75T4I49HF0lcKev9gK
 oTRUPvZu/bI6NmSRwYYY7jo1rox5ffftJ2ZICeQaluV2dbOMUc8=
 =7nBb
 -----END PGP SIGNATURE-----

Merge tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - New sensor drivers: gc05a2, gc08a3 and imx283

 - New serializer/deserializer drivers: max96714 and max96717

 - New JPEG encoder driver: e5010

 - Support for Raspberry Pi PiSP Backend (BE) ISP driver

 - Old documentation for av7110 driver removed, as a new version was
   added as Documentation/userspace-api/media/dvb/legacy*.rst

 - atompisp: Linux firmwares are now available, so drop firmware-related
   task from TODO and update firmware logic

 - The imx258 driver has gained several improvements

 - wave5 driver has gained support for HEVC decoding

 - em28xx gained support for MyGica UTV3

 - av7110 budget-patch driver removed

 - Lots of other cleanups, improvements and fixes

* tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits)
  media: raspberrypi: Switch to remove_new
  media: uapi: pisp_be_config: Add extra config fields
  media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config
  media: uapi: pisp_common: Capitalize all macros
  media: uapi: pisp_common: Add 32 bpp format test
  media: uapi: pisp_be_config: Drop BIT() from uAPI
  media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs
  media: atomisp: Fix spelling mistakes in sh_css_sp.c
  media: atomisp: Fix spelling mistake in ia_css_debug.c
  media: atomisp: Fix spelling mistake in hmm_bo.c
  media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c
  media: atomisp: Fix spelling mistake in sh_css_internal.h
  media: atomisp: Fix spelling mistake "pipline" -> "pipeline"
  media: atomisp: Remove unused GPIO related defines and APIs
  media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert()
  media: atomisp: Clean up unused macros from math_support.h
  media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2
  media: atomisp: Update TODO
  media: atomisp: Prefix firmware paths with "intel/ipu/"
  media: atomisp: Remove firmware_name module parameter
  ...
 2024-07-17 18:30:10 -07:00
Beau Belgrave
702418f755 Documentation: Document user_events ioctl code 
The user events trace subsystem uses the 0x2A/'*' code for ioctls. These
are published via the uapi/linux/user_events.h header file.

Add a line indicating user events as the owner of the 0x2A/'*' code and
reserve the first 32 sequence numbers.

Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240715181413.1157-1-beaub@linux.microsoft.com
 2024-07-16 11:15:02 -06:00
Linus Torvalds
b3c0eccb48 gpio updates for v6.11-rc1 
GPIOLIB core:
 - rework kfifo handling rework in the character device code
 - improve the labeling of GPIOs requested as interrupts and show more info
   on interrupt-only GPIOs in debugfs
 - remove unused APIs
 - unexport interfaces that are only used from the core GPIO code
 - drop the return value from gpiochip_set_desc_names() as it cannot fail
 - move a string array definition out of a header and into a specific
   compilation unit
 - convert the last user of gpiochip_get_desc() other than GPIO core to using
   a safer alternative
 - use array_index_nospec() where applicable
 
 New drivers:
 - add a "virtual GPIO consumer" module that allows requesting GPIOs from actual
   hardware and driving tests of the in-kernel GPIO API from user-space over
   debugfs
 - add a GPIO-based "sloppy" logic analyzer module useful for "first glance"
   debugging on remote boards
 
 Driver improvements:
 - add support for a new model to gpio-pca953x
 - lock GPIOs as interrupts in gpio-sim when the lines are requested as irqs
   via the simulator domain + some other minor improvements
 - improve error reporting in gpio-syscon
 - convert gpio-ath79 to using dynamic GPIO base and range
 - use pcibios_err_to_errno() for converting PCIBIOS error codes to errno
   vaues in gpio-amd8111 and gpio-rdc321x
 - allow building gpio-brcmstb for the BCM2835 architecture
 
 DT bindings:
 - convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
 - document new properties for aspeed,gpio, fsl,qoriq-gpio and gpio-vf610
 - document new compatibles for pca953x and fsl,qoriq-gpio
 
 Documentation:
 - document stricter behavior of the GPIO character device uAPI with regards to
   reconfiguring requested line without direction set
 - clarify the effect of the active-low flag on line values and edges
 - remove documentation for the legacy GPIO API in order to stop tempting
   people to use it
 - document the preference for using pread() for reading edge events in the
   sysfs API
 
 Other:
 - add an extended initializer to the interrupt simulator allowing to specify
   a number of callbacks callers can use to be notified about irqs being
   requested and released
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmaU3n4ACgkQEacuoBRx
 13LnYxAAgIfV2MQxdlB8+I3+PrObiom9uykNpoj8Ho3FiGroJEmSi2Vg9NOP5j8n
 7THjBDFqKk0USMdzGgWDe+u0oCpql8ONLd+lxPiKzRxkebMVzlumeNzWNEE3wqxO
 MdV3AOs9DLM1a4MAuv9E8PgooBVR8Cyqs3tc3wwpZRKoSZBIzwrjFL3tO1P8Dezv
 9xoPqIiMJRBZr8jifU/ZRdLG3gYKqgQH1Mha7bm94ebUwA6q/hxtGYAtc2a3Q+dF
 6lPrPONJBN6/YwvmoDddm2ppoiyWN7QdX9DQjJvKBcNRTZSE1EAggdh8kNnCoa1d
 +PeClIAJLl8ZSkdMS8yvMZIpduK4gTl7yEBMkER1d0JoJLkTowqKsvONgU12Npr2
 3rwbpACt/kVt5v0lRwaafj5vnD3NgiiVCeuZZz99ICbrXqe6rYszMIemKDYWWlTn
 kEFrTM5ql+dwAfvp8Y9JZf4oOgInHbF3LBKM34PKMW9D0a4aQC/HTfmtHobeNHzn
 FmY9ysHjMG6fvuwnkpojW6N3/LLwt+TX8jik9x0O42AE7qXn6a8U2g6RUg6rJOdd
 mUiIX3+rn+AaI6eKPvUNp2h391jH1K3hBCAca4cNAIKpqPuE/A/B5RyZZnL5Q7HQ
 Iz2G3hSlTBVPf7QWMkBUfMzQMwmvqfoKsZljC5y7YgafJc5cf4k=
 =kK88
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "The majority of added lines are two new modules: the GPIO virtual
  consumer module that improves our ability to add automated tests for
  the kernel API and the "sloppy" logic analyzer module that uses the
  GPIO API to implement a coarse-grained debugging tool for useful for
  remote development.

  Other than that we have the usual assortment of various driver
  extensions, improvements to the core GPIO code, DT-bindings and other
  documentation updates as well as an extension to the interrupt
  simulator:

  GPIOLIB core:
   - rework kfifo handling rework in the character device code
   - improve the labeling of GPIOs requested as interrupts and show more
     info on interrupt-only GPIOs in debugfs
   - remove unused APIs
   - unexport interfaces that are only used from the core GPIO code
   - drop the return value from gpiochip_set_desc_names() as it cannot
     fail
   - move a string array definition out of a header and into a specific
     compilation unit
   - convert the last user of gpiochip_get_desc() other than GPIO core
     to using a safer alternative
   - use array_index_nospec() where applicable

  New drivers:
   - add a "virtual GPIO consumer" module that allows requesting GPIOs
     from actual hardware and driving tests of the in-kernel GPIO API
     from user-space over debugfs
   - add a GPIO-based "sloppy" logic analyzer module useful for "first
     glance" debugging on remote boards

  Driver improvements:
   - add support for a new model to gpio-pca953x
   - lock GPIOs as interrupts in gpio-sim when the lines are requested
     as irqs via the simulator domain + some other minor improvements
   - improve error reporting in gpio-syscon
   - convert gpio-ath79 to using dynamic GPIO base and range
   - use pcibios_err_to_errno() for converting PCIBIOS error codes to
     errno vaues in gpio-amd8111 and gpio-rdc321x
   - allow building gpio-brcmstb for the BCM2835 architecture

  DT bindings:
   - convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
   - document new properties for aspeed,gpio, fsl,qoriq-gpio and
     gpio-vf610
   - document new compatibles for pca953x and fsl,qoriq-gpio

  Documentation:
   - document stricter behavior of the GPIO character device uAPI with
     regards to reconfiguring requested line without direction set
   - clarify the effect of the active-low flag on line values and edges
   - remove documentation for the legacy GPIO API in order to stop
     tempting people to use it
   - document the preference for using pread() for reading edge events
     in the sysfs API

  Other:
   - add an extended initializer to the interrupt simulator allowing to
     specify a number of callbacks callers can use to be notified about
     irqs being requested and released"

* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
  gpio: mc33880: Convert comma to semicolon
  gpio: virtuser: actually use the "trimmed" local variable
  dt-bindings: gpio: convert Atmel GPIO to json-schema
  gpio: virtuser: new virtual testing driver for the GPIO API
  dt-bindings: gpio: vf610: Allow gpio-line-names to be set
  gpio: sim: lock GPIOs as interrupts when they are requested
  genirq/irq_sim: add an extended irq_sim initializer
  dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
  gpiolib: unexport gpiochip_get_desc()
  gpio: add sloppy logic analyzer using polling
  Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
  Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
  dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
  gpio: ath79: convert to dynamic GPIO base allocation
  pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
  gpiolib: put gpio_suffixes in a single compilation unit
  Documentation: gpio: Clarify effect of active low flag on line edges
  Documentation: gpio: Clarify effect of active low flag on line values
  gpiolib: Remove data-less gpiochip_add() function
  gpio: sim: use devm_mutex_init()
  ...
 2024-07-15 17:53:24 -07:00
Vamsi Attunuru
5f67eef6df misc: mrvl-cn10k-dpi: add Octeon CN10K DPI administrative driver 
Adds a misc driver for Marvell CN10K DPI(DMA Engine) device's physical
function which initializes DPI DMA hardware's global configuration and
enables hardware mailbox channels between physical function (PF) and
it's virtual functions (VF). VF device drivers (User space drivers) use
this hw mailbox to communicate any required device configuration on it's
respective VF device. Accordingly, this DPI PF driver provisions the
VF device resources.

At the hardware level, the DPI physical function (PF) acts as a management
interface to setup the VF device resources, VF devices are only provisioned
to handle or control the actual DMA Engine's data transfer capabilities.

Signed-off-by: Vamsi Attunuru <vattunuru@marvell.com>
Reviewed-by: Srujana Challa <schalla@marvell.com>
Link: https://lore.kernel.org/r/20240706153009.3775333-1-vattunuru@marvell.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2024-07-10 14:58:29 +02:00
Mark-PK Tsai
228159802b docs: iommu: Remove outdated Documentation/userspace-api/iommu.rst 
The Documentation/userspace-api/iommu.rst file has become outdated due
to the removal of associated structures and APIs.

Specifically, struct such as iommu_cache_invalidate_info and guest
pasid related uapi were removed in commit 0c9f178778 ("iommu:
Remove guest pasid related interfaces and definitions").
And the corresponding uapi/linux/iommu.h file was removed in
commit 00a9bc6070 ("iommu: Move iommu fault data to
linux/iommu.h").

Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20240702120617.26882-1-mark-pk.tsai@mediatek.com
[will: Remove stale reference to 'iommu' from index.rst]
Signed-off-by: Will Deacon <will@kernel.org>
 2024-07-09 11:08:17 +01:00
Steven Rostedt (Google)
4ecaf7e98a tracing: Have memmapped ring buffer use ioctl of "R" range 0x20-2F 
To prevent conflicts with other ioctl numbers to allow strace to have an
idea of what is happening, add the range of ioctls for the trace buffer
mapping from _IO("T", 0x1) to the range of "R" 0x20 - 0x2F.

Link: https://lore.kernel.org/linux-trace-kernel/20240630105322.GA17573@altlinux.org/
Link: https://lore.kernel.org/linux-trace-kernel/20240630213626.GA23566@altlinux.org/

Cc: Jonathan Corbet <corbet@lwn.net>
Fixes: cf9f0f7c4c ("tracing: Allow user-space mapping of the ring-buffer")
Link: https://lore.kernel.org/20240702153354.367861db@rorschach.local.home
Reported-by: "Dmitry V. Levin" <ldv@strace.io>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
 2024-07-03 16:40:45 -04:00
Kent Gibson
6a9c15083b Documentation: gpio: Reconfiguration with unset direction (uAPI v2) 
Update description of reconfiguration rules, adding requirement that a
direction flag be set to enable changing configuration for a line.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-5-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-07-01 09:38:45 +02:00
Kent Gibson
e48fe75afa Documentation: gpio: Reconfiguration with unset direction (uAPI v1) 
Update description of reconfiguration rules, adding requirement that a
direction flag be set or the configuration is considered invalid.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240626052925.174272-4-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-07-01 09:38:45 +02:00
Jacopo Mondi
d260c12247 media: uapi: Add PiSP Compressed RAW Bayer formats 
Add Raspberry Pi compressed RAW Bayer formats.

The compression algorithm description is provided by Nick Hollinghurst
<nick.hollinghurst@raspberrypi.com> from Raspberry Pi.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-06-27 13:06:47 +02:00
Jacopo Mondi
8f6c220222 media: uapi: Add meta pixel format for PiSP BE config 
Add format description for the PiSP Back End configuration parameter
buffer.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-06-27 13:06:47 +02:00
Jacopo Mondi
d1741141d0 media: uapi: Add a pixel format for BGR48 and RGB48 
Add BGR48 and RGB48 16-bit per component image formats.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-06-27 13:06:47 +02:00
Jacopo Mondi
dd6aa1e1de media: uapi: pixfmt-luma: Document MIPI CSI-2 packing 
The Y10P, Y12P and Y14P format variants are packed according to
the RAW10, RAW12 and RAW14 formats as defined by the MIPI CSI-2
specification. Document it.

Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Naushir Patuck <naush@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-06-27 13:06:46 +02:00
Jeff Xu
653c5c7511 mm/memfd: add documentation for MFD_NOEXEC_SEAL MFD_EXEC 
When MFD_NOEXEC_SEAL was introduced, there was one big mistake: it didn't
have proper documentation.  This led to a lot of confusion, especially
about whether or not memfd created with the MFD_NOEXEC_SEAL flag is
sealable.  Before MFD_NOEXEC_SEAL, memfd had to explicitly set
MFD_ALLOW_SEALING to be sealable, so it's a fair question.

As one might have noticed, unlike other flags in memfd_create,
MFD_NOEXEC_SEAL is actually a combination of multiple flags.  The idea is
to make it easier to use memfd in the most common way, which is NOEXEC +
F_SEAL_EXEC + MFD_ALLOW_SEALING.  This works with sysctl vm.noexec to help
existing applications move to a more secure way of using memfd.

Proposals have been made to put MFD_NOEXEC_SEAL non-sealable, unless
MFD_ALLOW_SEALING is set, to be consistent with other flags [1], Those
are based on the viewpoint that each flag is an atomic unit, which is a
reasonable assumption.  However, MFD_NOEXEC_SEAL was designed with the
intent of promoting the most secure method of using memfd, therefore a
combination of multiple functionalities into one bit.

Furthermore, the MFD_NOEXEC_SEAL has been added for more than one year,
and multiple applications and distributions have backported and utilized
it.  Altering ABI now presents a degree of risk and may lead to
disruption.

MFD_NOEXEC_SEAL is a new flag, and applications must change their code to
use it.  There is no backward compatibility problem.

When sysctl vm.noexec == 1 or 2, applications that don't set
MFD_NOEXEC_SEAL or MFD_EXEC will get MFD_NOEXEC_SEAL memfd.  And
old-application might break, that is by-design, in such a system vm.noexec
= 0 shall be used.  Also no backward compatibility problem.

I propose to include this documentation patch to assist in clarifying the
semantics of MFD_NOEXEC_SEAL, thereby preventing any potential future
confusion.

Finally, I would like to express my gratitude to David Rheinsberg and
Barnabás Pőcze for initiating the discussion on the topic of sealability.

[1]
https://lore.kernel.org/lkml/20230714114753.170814-1-david@readahead.eu/

[jeffxu@chromium.org: updates per Randy]
  Link: https://lkml.kernel.org/r/20240611034903.3456796-2-jeffxu@chromium.org
[jeffxu@chromium.org: v3]
  Link: https://lkml.kernel.org/r/20240611231409.3899809-2-jeffxu@chromium.org
Link: https://lkml.kernel.org/r/20240607203543.2151433-2-jeffxu@google.com
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Barnabás Pőcze <pobrn@protonmail.com>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: David Rheinsberg <david@readahead.eu>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2024-06-15 10:43:07 -07:00
Benjamin Mugnier
15765ff714 media: i2c: vgxy61: Fix device name 
Rename 'st-vgxy61' to 'vgxy61', dropping the vendor prefix to follow the
same naming scheme as the vast majority of device drivers.
The device tree binding does not fall into binding rename exceptions and
therefore must not be changed. Keep its legacy name.

Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-06-15 11:16:40 +02:00
Kent Gibson
08d94c7428 Documentation: gpio: Clarify effect of active low flag on line edges 
The documentation does not make sufficiently clear that edge polarity is
based on changes to the logical line values, and that the physical
polarity of edges is dependent on the active low flag.

Clarify the relationship between the active low flag and edge polarity
for the functions that read edge events.

Suggested-by: David C. Rankin <drankinatty@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240610092157.9147-3-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-06-12 14:02:54 +02:00
Kent Gibson
5ca84d416e Documentation: gpio: Clarify effect of active low flag on line values 
The documentation does not make sufficiently clear that the uAPI deals with
logical line values, nor does it describe the influence of the active low
flag on the mapping between physical and logical line values.

Clarify the relationship between physical and logical line values and the
effect of the active low flag for ioctls passing line values.

Suggested-by: David C. Rankin <drankinatty@gmail.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Link: https://lore.kernel.org/r/20240610092157.9147-2-warthog618@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-06-12 14:02:54 +02:00
Ming Qian
62096c4839 media: v4l2-ctrls: Add average QP control 
Add a control V4L2_CID_MPEG_VIDEO_AVERAGE_QP to report the average QP
value of the current encoded frame. The value applies to the last
dequeued capture buffer.

Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-06-10 10:24:30 +02:00
Hans Verkuil
8f79b09bbe Linux 6.10-rc3 
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZmHG8eHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGevkH/3YuG9YSP1eo93Da
 eQAiwoOtxHsUWh9+2HQYrK5J1s7mCsf9+X2DtKZ3WJ4ZrtiYSvKPNwfG625JMgLb
 aLKZFtu2fbijGuRyGM/9o6eZ7ZspZbVTcoCo4RAW1uTzsF8mpIFCp2gpGE7SiTfh
 sdXkk3EX6DGrD0oZCu9A1uBBJ8MDB3tCQywnE7ny/X22pze6xCy7CZQWhk4EjOII
 zZt8Lukhs1AjJrS9X0DXcFayQB7WB75mx7XvaiqepcXPGb0fUI2TZW5oTlGk9uXD
 59KfjWe3Fn4Xp0Z83iLByjVuB+ZceZBD/1B24EqieQLVero3PLdh6B4XHKGKfDU+
 C16bWqs=
 =4UyN
 -----END PGP SIGNATURE-----

Merge tag 'v6.10-rc3'

Linux 6.10-rc3

This is needed for the ipu6 and mei fixes.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-06-10 10:20:16 +02:00
Huichun Feng
7f1e45f4ae docs: gpio: prefer pread(2) for interrupt reading 
In legacy sysfs GPIO, when using poll(2) on the sysfs GPIO value for
state change awaiting, a subsequent read(2) is required for consuming
the event, which the doc recommends the use of lseek(2) or
close-and-reopen to reset the file offset afterwards.

The recommendations however, require at least 2 syscalls to consume
the event. Gladly, use of pread(2) require only 1 syscall for the
consumption. Let's advertise this usage by prioritizing its placement.

Signed-off-by: Huichun Feng <foxhoundsk.tw@gmail.com>
Link: https://lore.kernel.org/r/20240609173728.2950808-1-foxhoundsk.tw@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-06-10 09:37:52 +02:00
Fritz Koenig
96646f3a5a Documentation: media: Fix v4l2_ctrl_vp8_frame struct 
Description and control were out of sync.

Signed-off-by: Fritz Koenig <frkoenig@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-05-31 13:51:17 +02:00
Sakari Ailus
fd7ccfb112 media: Documentation: v4l: Fix ACTIVE route flag 
The documentation in one occasion mentions the
VIDIOC_SUBDEV_STREAM_FL_ACTIVE flag. This was meant to be
V4L2_SUBDEV_STREAM_FL_ACTIVE as it's a flag, not an IOCTL. Fix it.

Fixes: cd2c75454d ("media: Documentation: Document S_ROUTING behaviour")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-05-28 08:00:14 +02:00
Jeff Xu
c010d09900 mseal: add documentation 
Add documentation for mseal().

Link: https://lkml.kernel.org/r/20240415163527.626541-5-jeffxu@chromium.org
Signed-off-by: Jeff Xu <jeffxu@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Jann Horn <jannh@google.com>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jorge Lucangeli Obes <jorgelo@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Pedro Falcato <pedro.falcato@gmail.com>
Cc: Stephen Röttger <sroettger@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Amer Al Shanawany <amer.shanawany@gmail.com>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
 2024-05-23 19:40:26 -07:00
Linus Torvalds
5f16eb0549 Char/Misc and other driver subsystem changes for 6.10-rc1 
Here is the big set of char/misc and other driver subsystem updates for
 6.10-rc1.  Nothing major here, just lots of new drivers and updates for
 apis and new hardware types.  Included in here are:
   - big IIO driver updates with more devices and drivers added
   - fpga driver updates
   - hyper-v driver updates
   - uio_pruss driver removal, no one uses it, other drivers control the
     same hardware now
   - binder minor updates
   - mhi driver updates
   - excon driver updates
   - counter driver updates
   - accessability driver updates
   - coresight driver updates
   - other hwtracing driver updates
   - nvmem driver updates
   - slimbus driver updates
   - spmi driver updates
   - other smaller misc and char driver updates
 
 All of these have been in linux-next for a while with no reported
 issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZk3lTg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynhZQCfSWyK0lHsys2LhEBmufrB3RCgnZwAn3Lm2eJY
 WVk7h01A0lHyacrzm5LN
 =s95M
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.10-rc1. Nothing major here, just lots of new drivers and updates
  for apis and new hardware types. Included in here are:

   - big IIO driver updates with more devices and drivers added

   - fpga driver updates

   - hyper-v driver updates

   - uio_pruss driver removal, no one uses it, other drivers control the
     same hardware now

   - binder minor updates

   - mhi driver updates

   - excon driver updates

   - counter driver updates

   - accessability driver updates

   - coresight driver updates

   - other hwtracing driver updates

   - nvmem driver updates

   - slimbus driver updates

   - spmi driver updates

   - other smaller misc and char driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
  misc: ntsync: mark driver as "broken" to prevent from building
  spmi: pmic-arb: Add multi bus support
  spmi: pmic-arb: Register controller for bus instead of arbiter
  spmi: pmic-arb: Make core resources acquiring a version operation
  spmi: pmic-arb: Make the APID init a version operation
  spmi: pmic-arb: Fix some compile warnings about members not being described
  dt-bindings: spmi: Deprecate qcom,bus-id
  dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
  spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
  spmi: hisi-spmi-controller: Do not override device identifier
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
  spmi: make spmi_bus_type const
  extcon: adc-jack: Document missing struct members
  extcon: realtek: Remove unused of_gpio.h
  extcon: usbc-cros-ec: Convert to platform remove callback returning void
  extcon: usb-gpio: Convert to platform remove callback returning void
  extcon: max77843: Convert to platform remove callback returning void
  extcon: max3355: Convert to platform remove callback returning void
  extcon: intel-mrfld: Convert to platform remove callback returning void
  ...
 2024-05-22 12:26:46 -07:00
Linus Torvalds
2fc0e7892c Landlock updates for v6.10-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZkYGahAcbWljQGRpZ2lr
 b2QubmV0AAoJEOXj0OiMgvbSaxUBAL1USJI2DUo+hJTDHqXdVZGEE6VfYnmEhIur
 NZfsti4UAQCabAej7+NHzh1jAnnKMJFbcyl4LRy99anJGlEWq9ExDA==
 =fViz
 -----END PGP SIGNATURE-----

Merge tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux

Pull landlock updates from Mickaël Salaün:
 "This brings ioctl control to Landlock, contributed by Günther Noack.
  This also adds him as a Landlock reviewer, and fixes an issue in the
  sample"

* tag 'landlock-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  MAINTAINERS: Add Günther Noack as Landlock reviewer
  fs/ioctl: Add a comment to keep the logic in sync with LSM policies
  MAINTAINERS: Notify Landlock maintainers about changes to fs/ioctl.c
  landlock: Document IOCTL support
  samples/landlock: Add support for LANDLOCK_ACCESS_FS_IOCTL_DEV
  selftests/landlock: Exhaustive test for the IOCTL allow-list
  selftests/landlock: Check IOCTL restrictions for named UNIX domain sockets
  selftests/landlock: Test IOCTLs on named pipes
  selftests/landlock: Test ioctl(2) and ftruncate(2) with open(O_PATH)
  selftests/landlock: Test IOCTL with memfds
  selftests/landlock: Test IOCTL support
  landlock: Add IOCTL access right for character and block devices
  samples/landlock: Fix incorrect free in populate_ruleset_net
 2024-05-18 10:48:07 -07:00
Linus Torvalds
6fd600d742 media updates for v6.10-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmZFpvgACgkQCF8+vY7k
 4RXffg//UOFGd12GwhBtkU1a3cBqT1DAUG8GRnmhLnGypRaiP7ypRhI/LV1ZZ0SQ
 vjKuDuXrbk+JJ4hxNTH8GoisYpnRqqC2vIm5cnjCiMxN/pY/GkzPm7MU5zEhuWMB
 Rtz5RS4UrTtpJ95XxuDhXY5rRb3uPXMF2LUHLUbYq3IoUGz8x/ta1aKE56B35vY+
 jDg9JQugR1ciIf0OL7kvDJJfDUKkGGsr/u4gRWBxntYHtVMdUJXso3tYa78F1mBX
 oTWKc8IFms1JgA7NdDnKttOCO0Ykb0IJxE0qO094xuOPW50wLsLByJXdxJtOBj/Q
 iLvSIVrk//U+re0j6xLJgKES6ldZvDKn5AU3O22lbm9cgeXrbONIHQOSqLumYPCi
 HLnuc0eq4oED1UHj695pNyjgigUmZL9mDMB31AU92r0pfOKpGFRnexT1tyhqFonN
 88HMKInudnLsE7lVPzbUSVZxJfhOFj7jf8LILnRzqzy0HOD7te5KhxdjxtBmXvoN
 lpQ3Cs+i/n3Fe510mO0rcpeR73nYkNnX7EoJWOjojCK+Cz7/GnXICF53T0yAYANA
 W6ZGKNCEEgs8ce6dFrRG33jv0I8b/u6L5BVuWT/Ndam+KwMw59OjKlNPDiTvtwSR
 OZDL9eifturMuMUe0HT6k6k3u6VYWWjn2cvMFHg4g7Y6JOrllfQ=
 =JM5r
 -----END PGP SIGNATURE-----

Merge tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - New V4L2 ioctl VIDIOC_REMOVE_BUFS

 - experimental support for using generic metaformats on V4L2 core

 - New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x

 - More cleanups at atomisp driver

 - Usual bunch of driver cleanups, improvements and fixes

* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
  media: bcm2835-unicam: Depend on COMMON_CLK
  Revert "media: v4l2-ctrls: show all owned controls in log_status"
  media: ov2740: Ensure proper reset sequence on probe()
  media: intel/ipu6: Don't print user-triggerable errors to kernel log
  media: bcm2835-unicam: Fix driver path in MAINTAINERS
  media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
  media: bcm2835-unicam: Do not print error when irq not found
  media: bcm2835-unicam: Do not replace IRQ retcode during probe
  media: bcm2835-unicam: Convert to platform remove callback returning void
  media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
  media: intel/ipu6: explicitly include vmalloc.h
  media: cec.h: Fix kerneldoc
  media: uvcvideo: Refactor iterators
  media: v4l: async: refactor v4l2_async_create_ancillary_links
  media: intel/ipu6: Don't re-allocate memory for firmware
  media: dvb-frontends: tda10048: Fix integer overflow
  media: tc358746: Use the correct div_ function
  media: i2c: st-mipid02: Use the correct div function
  media: tegra-vde: Refactor timeout handling
  media: stk1160: Use min macro
  ...
 2024-05-16 08:45:44 -07:00
Linus Torvalds
1b294a1f35 Networking changes for 6.10. 
Core & protocols
 ----------------
 
  - Complete rework of garbage collection of AF_UNIX sockets.
    AF_UNIX is prone to forming reference count cycles due to fd passing
    functionality. New method based on Tarjan's Strongly Connected Components
    algorithm should be both faster and remove a lot of workarounds
    we accumulated over the years.
 
  - Add TCP fraglist GRO support, allowing chaining multiple TCP packets
    and forwarding them together. Useful for small switches / routers which
    lack basic checksum offload in some scenarios (e.g. PPPoE).
 
  - Support using SMP threads for handling packet backlog i.e. packet
    processing from software interfaces and old drivers which don't
    use NAPI. This helps move the processing out of the softirq jumble.
 
  - Continue work of converting from rtnl lock to RCU protection.
    Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
    labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
    MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
    neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
    information available via rtnetlink.
 
  - Small optimizations from Eric to UDP wake up handling, memory accounting,
    RPS/RFS implementation, TCP packet sizing etc.
 
  - Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
 
  - Support peek with an offset on TCP sockets.
 
  - Add MPTCP APIs for querying last time packets were received/sent/acked,
    and whether MPTCP "upgrade" succeeded on a TCP socket.
 
  - Add intra-node communication shortcut to improve SMC performance.
 
  - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
 
  - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
 
  - Add reset reasons for tracing what caused a TCP reset to be sent.
 
  - Introduce direction attribute for xfrm (IPSec) states.
    State can be used either for input or output packet processing.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
    This required touch-ups and renaming of a few existing users.
 
  - Add Endian-dependent __counted_by_{le,be} annotations.
 
  - Make building selftests "quieter" by printing summaries like
    "CC object.o" rather than full commands with all the arguments.
 
 Netfilter
 ---------
 
  - Use GFP_KERNEL to clone elements, to deal better with OOM situations
    and avoid failures in the .commit step.
 
 BPF
 ---
 
  - Add eBPF JIT for ARCv2 CPUs.
 
  - Support attaching kprobe BPF programs through kprobe_multi link in
    a session mode, meaning, a BPF program is attached to both function entry
    and return, the entry program can decide if the return program gets
    executed and the entry program can share u64 cookie value with return
    program. "Session mode" is a common use-case for tetragon and bpftrace.
 
  - Add the ability to specify and retrieve BPF cookie for raw tracepoint
    programs in order to ease migration from classic to raw tracepoints.
 
  - Add an internal-only BPF per-CPU instruction for resolving per-CPU
    memory addresses and implement support in x86, ARM64 and RISC-V JITs.
    This allows inlining functions which need to access per-CPU state.
 
  - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
    atomics in bpf_arena which can be JITed as a single x86 instruction.
    Support BPF arena on ARM64.
 
  - Add a new bpf_wq API for deferring events and refactor process-context
    bpf_timer code to keep common code where possible.
 
  - Harden the BPF verifier's and/or/xor value tracking.
 
  - Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
 
  - Support bpf_tail_call_static() helper for BPF programs with GCC 13.
 
  - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
    program to have code sections where preemption is disabled.
 
 Driver API
 ----------
 
  - Skip software TC processing completely if all installed rules are
    marked as HW-only, instead of checking the HW-only flag rule by rule.
 
  - Add support for configuring PoE (Power over Ethernet), similar to
    the already existing support for PoDL (Power over Data Line) config.
 
  - Initial bits of a queue control API, for now allowing a single queue
    to be reset without disturbing packet flow to other queues.
 
  - Common (ethtool) statistics for hardware timestamping.
 
 Tests and tooling
 -----------------
 
  - Remove the need to create a config file to run the net forwarding tests
    so that a naive "make run_tests" can exercise them.
 
  - Define a method of writing tests which require an external endpoint
    to communicate with (to send/receive data towards the test machine).
    Add a few such tests.
 
  - Create a shared code library for writing Python tests. Expose the YAML
    Netlink library from tools/ to the tests for easy Netlink access.
 
  - Move netfilter tests under net/, extend them, separate performance tests
    from correctness tests, and iron out issues found by running them
    "on every commit".
 
  - Refactor BPF selftests to use common network helpers.
 
  - Further work filling in YAML definitions of Netlink messages for:
    nftables, team driver, bonding interfaces, vlan interfaces, VF info,
    TC u32 mark, TC police action.
 
  - Teach Python YAML Netlink to decode attribute policies.
 
  - Extend the definition of the "indexed array" construct in the specs
    to cover arrays of scalars rather than just nests.
 
  - Add hyperlinks between definitions in generated Netlink docs.
 
 Drivers
 -------
 
  - Make sure unsupported flower control flags are rejected by drivers,
    and make more drivers report errors directly to the application rather
    than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
 
  - Ethernet high-speed NICs:
    - Broadcom (bnxt):
      - support multiple RSS contexts and steering traffic to them
      - support XDP metadata
      - make page pool allocations more NUMA aware
    - Intel (100G, ice, idpf):
      - extract datapath code common among Intel drivers into a library
      - use fewer resources in switchdev by sharing queues with the PF
      - add PFCP filter support
      - add Ethernet filter support
      - use a spinlock instead of HW lock in PTP clock ops
      - support 5 layer Tx scheduler topology
    - nVidia/Mellanox:
      - 800G link modes and 100G SerDes speeds
      - per-queue IRQ coalescing configuration
    - Marvell Octeon:
      - support offloading TC packet mark action
 
  - Ethernet NICs consumer, embedded and virtual:
    - stop lying about skb->truesize in USB Ethernet drivers, it messes up
      TCP memory calculations
    - Google cloud vNIC:
      - support changing ring size via ethtool
      - support ring reset using the queue control API
    - VirtIO net:
      - expose flow hash from RSS to XDP
      - per-queue statistics
      - add selftests
    - Synopsys (stmmac):
      - support controllers which require an RX clock signal from the MII
        bus to perform their hardware initialization
    - TI:
      - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
      - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
      - cpsw: minimal XDP support
    - Renesas (ravb):
      - support describing the MDIO bus
    - Realtek (r8169):
      - add support for RTL8168M
    - Microchip Sparx5:
      - matchall and flower actions mirred and redirect
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - improve events processing performance
    - Marvell:
      - add support for MV88E6250 family internal PHYs
    - Microchip:
      - add DCB and DSCP mapping support for KSZ switches
      - vsc73xx: convert to PHYLINK
    - Realtek:
      - rtl8226b/rtl8221b: add C45 instances and SerDes switching
 
  - Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
 
  - Ethernet PHYs:
    - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
    - micrel: lan8814: add support for PPS out and external timestamp trigger
 
  - WiFi:
    - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
      Modern devices can only be configured using nl80211.
    - mac80211/cfg80211
      - handle color change per link for WiFi 7 Multi-Link Operation
    - Intel (iwlwifi):
      - don't support puncturing in 5 GHz
      - support monitor mode on passive channels
      - BZ-W device support
      - P2P with HE/EHT support
      - re-add support for firmware API 90
      - provide channel survey information for Automatic Channel Selection
    - MediaTek (mt76):
      - mt7921 LED control
      - mt7925 EHT radiotap support
      - mt7920e PCI support
    - Qualcomm (ath11k):
      - P2P support for QCA6390, WCN6855 and QCA2066
      - support hibernation
      - ieee80211-freq-limit Device Tree property support
    - Qualcomm (ath12k):
      - refactoring in preparation of multi-link support
      - suspend and hibernation support
      - ACPI support
      - debugfs support, including dfs_simulate_radar support
    - RealTek:
      - rtw88: RTL8723CS SDIO device support
      - rtw89: RTL8922AE Wi-Fi 7 PCI device support
      - rtw89: complete features of new WiFi 7 chip 8922AE including
        BT-coexistence and Wake-on-WLAN
      - rtw89: use BIOS ACPI settings to set TX power and channels
      - rtl8xxxu: enable Management Frame Protection (MFP) support
 
  - Bluetooth:
    - support for Intel BlazarI and Filmore Peak2 (BE201)
    - support for MediaTek MT7921S SDIO
    - initial support for Intel PCIe BT driver
    - remove HCI_AMP support
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmZD6sQACgkQMUZtbf5S
 IrtLYw/+I73ePGIye37o2jpbodcLAUZVfF3r6uYUzK8hokEcKD0QVJa9w7PizLZ3
 UO45ClOXFLJCkfP4reFenLfxGCel2AJI+F7VFl2xaO2XgrcH/lnVrHqKZEAEXjls
 KoYMnShIolv7h2MKP6hHtyTi2j1wvQUKsZC71o9/fuW+4fUT8gECx1YtYcL73wrw
 gEMdlUgBYC3jiiCUHJIFX6iPJ2t/TC+q1eIIF2K/Osrk2kIqQhzoozcL4vpuAZQT
 99ljx/qRelXa8oppDb7nM5eulg7WY8ZqxEfFZphTMC5nLEGzClxuOTTl2kDYI/D/
 UZmTWZDY+F5F0xvNk2gH84qVJXBOVDoobpT7hVA/tDuybobc/kvGDzRayEVqVzKj
 Q0tPlJs+xBZpkK5TVnxaFLJVOM+p1Xosxy3kNVXmuYNBvT/R89UbJiCrUKqKZF+L
 z/1mOYUv8UklHqYAeuJSptHvqJjTGa/fsEYP7dAUBbc1N2eVB8mzZ4mgU5rYXbtC
 E6UXXiWnoSRm8bmco9QmcWWoXt5UGEizHSJLz6t1R5Df/YmXhWlytll5aCwY1ksf
 FNoL7S4u7AZThL1Nwi7yUs4CAjhk/N4aOsk+41S0sALCx30BJuI6UdesAxJ0lu+Z
 fwCQYbs27y4p7mBLbkYwcQNxAxGm7PSK4yeyRIy2njiyV4qnLf8=
 =EsC2
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Complete rework of garbage collection of AF_UNIX sockets.

     AF_UNIX is prone to forming reference count cycles due to fd
     passing functionality. New method based on Tarjan's Strongly
     Connected Components algorithm should be both faster and remove a
     lot of workarounds we accumulated over the years.

   - Add TCP fraglist GRO support, allowing chaining multiple TCP
     packets and forwarding them together. Useful for small switches /
     routers which lack basic checksum offload in some scenarios (e.g.
     PPPoE).

   - Support using SMP threads for handling packet backlog i.e. packet
     processing from software interfaces and old drivers which don't use
     NAPI. This helps move the processing out of the softirq jumble.

   - Continue work of converting from rtnl lock to RCU protection.

     Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
     address labels, netdev threaded NAPI sysfs files, bonding driver's
     sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
     TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
     of the link information available via rtnetlink.

   - Small optimizations from Eric to UDP wake up handling, memory
     accounting, RPS/RFS implementation, TCP packet sizing etc.

   - Allow direct page recycling in the bulk API used by XDP, for +2%
     PPS.

   - Support peek with an offset on TCP sockets.

   - Add MPTCP APIs for querying last time packets were received/sent/acked
     and whether MPTCP "upgrade" succeeded on a TCP socket.

   - Add intra-node communication shortcut to improve SMC performance.

   - Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
     driver.

   - Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.

   - Add reset reasons for tracing what caused a TCP reset to be sent.

   - Introduce direction attribute for xfrm (IPSec) states. State can be
     used either for input or output packet processing.

  Things we sprinkled into general kernel code:

   - Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().

     This required touch-ups and renaming of a few existing users.

   - Add Endian-dependent __counted_by_{le,be} annotations.

   - Make building selftests "quieter" by printing summaries like
     "CC object.o" rather than full commands with all the arguments.

  Netfilter:

   - Use GFP_KERNEL to clone elements, to deal better with OOM
     situations and avoid failures in the .commit step.

  BPF:

   - Add eBPF JIT for ARCv2 CPUs.

   - Support attaching kprobe BPF programs through kprobe_multi link in
     a session mode, meaning, a BPF program is attached to both function
     entry and return, the entry program can decide if the return
     program gets executed and the entry program can share u64 cookie
     value with return program. "Session mode" is a common use-case for
     tetragon and bpftrace.

   - Add the ability to specify and retrieve BPF cookie for raw
     tracepoint programs in order to ease migration from classic to raw
     tracepoints.

   - Add an internal-only BPF per-CPU instruction for resolving per-CPU
     memory addresses and implement support in x86, ARM64 and RISC-V
     JITs. This allows inlining functions which need to access per-CPU
     state.

   - Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
     atomics in bpf_arena which can be JITed as a single x86
     instruction. Support BPF arena on ARM64.

   - Add a new bpf_wq API for deferring events and refactor
     process-context bpf_timer code to keep common code where possible.

   - Harden the BPF verifier's and/or/xor value tracking.

   - Introduce crypto kfuncs to let BPF programs call kernel crypto
     APIs.

   - Support bpf_tail_call_static() helper for BPF programs with GCC 13.

   - Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
     program to have code sections where preemption is disabled.

  Driver API:

   - Skip software TC processing completely if all installed rules are
     marked as HW-only, instead of checking the HW-only flag rule by
     rule.

   - Add support for configuring PoE (Power over Ethernet), similar to
     the already existing support for PoDL (Power over Data Line)
     config.

   - Initial bits of a queue control API, for now allowing a single
     queue to be reset without disturbing packet flow to other queues.

   - Common (ethtool) statistics for hardware timestamping.

  Tests and tooling:

   - Remove the need to create a config file to run the net forwarding
     tests so that a naive "make run_tests" can exercise them.

   - Define a method of writing tests which require an external endpoint
     to communicate with (to send/receive data towards the test
     machine). Add a few such tests.

   - Create a shared code library for writing Python tests. Expose the
     YAML Netlink library from tools/ to the tests for easy Netlink
     access.

   - Move netfilter tests under net/, extend them, separate performance
     tests from correctness tests, and iron out issues found by running
     them "on every commit".

   - Refactor BPF selftests to use common network helpers.

   - Further work filling in YAML definitions of Netlink messages for:
     nftables, team driver, bonding interfaces, vlan interfaces, VF
     info, TC u32 mark, TC police action.

   - Teach Python YAML Netlink to decode attribute policies.

   - Extend the definition of the "indexed array" construct in the specs
     to cover arrays of scalars rather than just nests.

   - Add hyperlinks between definitions in generated Netlink docs.

  Drivers:

   - Make sure unsupported flower control flags are rejected by drivers,
     and make more drivers report errors directly to the application
     rather than dmesg (large number of driver changes from Asbjørn
     Sloth Tønnesen).

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support multiple RSS contexts and steering traffic to them
         - support XDP metadata
         - make page pool allocations more NUMA aware
      - Intel (100G, ice, idpf):
         - extract datapath code common among Intel drivers into a library
         - use fewer resources in switchdev by sharing queues with the PF
         - add PFCP filter support
         - add Ethernet filter support
         - use a spinlock instead of HW lock in PTP clock ops
         - support 5 layer Tx scheduler topology
      - nVidia/Mellanox:
         - 800G link modes and 100G SerDes speeds
         - per-queue IRQ coalescing configuration
      - Marvell Octeon:
         - support offloading TC packet mark action

   - Ethernet NICs consumer, embedded and virtual:
      - stop lying about skb->truesize in USB Ethernet drivers, it
        messes up TCP memory calculations
      - Google cloud vNIC:
         - support changing ring size via ethtool
         - support ring reset using the queue control API
      - VirtIO net:
         - expose flow hash from RSS to XDP
         - per-queue statistics
         - add selftests
      - Synopsys (stmmac):
         - support controllers which require an RX clock signal from the
           MII bus to perform their hardware initialization
      - TI:
         - icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
         - icssg_prueth: add SW TX / RX Coalescing based on hrtimers
         - cpsw: minimal XDP support
      - Renesas (ravb):
         - support describing the MDIO bus
      - Realtek (r8169):
         - add support for RTL8168M
      - Microchip Sparx5:
         - matchall and flower actions mirred and redirect

   - Ethernet switches:
      - nVidia/Mellanox:
         - improve events processing performance
      - Marvell:
         - add support for MV88E6250 family internal PHYs
      - Microchip:
         - add DCB and DSCP mapping support for KSZ switches
         - vsc73xx: convert to PHYLINK
      - Realtek:
         - rtl8226b/rtl8221b: add C45 instances and SerDes switching

   - Many driver changes related to PHYLIB and PHYLINK deprecated API
     cleanup

   - Ethernet PHYs:
      - Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
      - micrel: lan8814: add support for PPS out and external timestamp trigger

   - WiFi:
      - Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
        drivers. Modern devices can only be configured using nl80211.
      - mac80211/cfg80211
         - handle color change per link for WiFi 7 Multi-Link Operation
      - Intel (iwlwifi):
         - don't support puncturing in 5 GHz
         - support monitor mode on passive channels
         - BZ-W device support
         - P2P with HE/EHT support
         - re-add support for firmware API 90
         - provide channel survey information for Automatic Channel Selection
      - MediaTek (mt76):
         - mt7921 LED control
         - mt7925 EHT radiotap support
         - mt7920e PCI support
      - Qualcomm (ath11k):
         - P2P support for QCA6390, WCN6855 and QCA2066
         - support hibernation
         - ieee80211-freq-limit Device Tree property support
      - Qualcomm (ath12k):
         - refactoring in preparation of multi-link support
         - suspend and hibernation support
         - ACPI support
         - debugfs support, including dfs_simulate_radar support
      - RealTek:
         - rtw88: RTL8723CS SDIO device support
         - rtw89: RTL8922AE Wi-Fi 7 PCI device support
         - rtw89: complete features of new WiFi 7 chip 8922AE including
           BT-coexistence and Wake-on-WLAN
         - rtw89: use BIOS ACPI settings to set TX power and channels
         - rtl8xxxu: enable Management Frame Protection (MFP) support

   - Bluetooth:
      - support for Intel BlazarI and Filmore Peak2 (BE201)
      - support for MediaTek MT7921S SDIO
      - initial support for Intel PCIe BT driver
      - remove HCI_AMP support"

* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
  selftests: netfilter: fix packetdrill conntrack testcase
  net: gro: fix napi_gro_cb zeroed alignment
  Bluetooth: btintel_pcie: Refactor and code cleanup
  Bluetooth: btintel_pcie: Fix warning reported by sparse
  Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
  Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
  Bluetooth: btintel_pcie: Fix compiler warnings
  Bluetooth: btintel_pcie: Add *setup* function to download firmware
  Bluetooth: btintel_pcie: Add support for PCIe transport
  Bluetooth: btintel: Export few static functions
  Bluetooth: HCI: Remove HCI_AMP support
  Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
  Bluetooth: qca: Fix error code in qca_read_fw_build_info()
  Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
  Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
  Bluetooth: btintel: Add support for BlazarI
  LE Create Connection command timeout increased to 20 secs
  dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
  Bluetooth: compute LE flow credits based on recvbuf space
  Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
  ...
 2024-05-14 19:42:24 -07:00
Günther Noack
a3746da89f
landlock: Document IOCTL support 
In the paragraph above the fallback logic, use the shorter phrasing
from the landlock(7) man page.

Signed-off-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240419161122.2023765-10-gnoack@google.com
[mic: Update date, and fix redundant "access"]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
 2024-05-13 06:58:34 +02:00
Jean-Michel Hautbois
adb1d4655e media: v4l: Add V4L2-PIX-FMT-Y14P format 
This is a packed grey-scale image format with a depth of 14 bits per
pixel. Every four consecutive samples are packed into seven bytes. Each
of the first four bytes contain the eight high order bits of the pixels,
and the three following bytes contains the six least significants bits
of each pixel, in the same order.

As the other formats only needed 5 bytes before, append two bytes in the
documentation array.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:37 +02:00
Jean-Michel Hautbois
1810477630 media: v4l: Add V4L2-PIX-FMT-Y12P format 
This is a packed grey-scale image format with a depth of 12 bits per
pixel. Two consecutive pixels are packed into 3 bytes. The first 2 bytes
contain the 8 high order bits of the pixels, and the 3rd byte contains
the 4 least significants bits of each pixel, in the same order.

Add the entry in userspace API, and document it.

Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:37 +02:00
Sakari Ailus
91e99e5a0b media: v4l: subdev: Return routes set using S_ROUTING 
Return the routes set using S_ROUTING back to the user. Also reflect this
in documentation.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:37 +02:00
Sakari Ailus
83a22a07cd media: v4l: subdev: Add len_routes field to struct v4l2_subdev_routing 
The len_routes field is used to tell the size of the routes array in
struct v4l2_subdev_routing. This way the number of routes returned from
S_ROUTING IOCTL may be larger than the number of routes provided, in case
there are more routes returned by the driver.

Note that this uAPI is still disabled in the code, so this change can
safely be done. Anyone who manually patched the code to enable this uAPI
must update their code.

The patch also increases the number of reserved fields in struct
v4l2_subdev_routing.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:37 +02:00
Sakari Ailus
cd2c75454d media: Documentation: Document S_ROUTING behaviour 
Document S_ROUTING behaviour for different devices.

Generally in devices that produce streams the streams are static and some
can be enabled and disabled, whereas in devices that just transport them
or write them to memory, more configurability is allowed. Document this.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:36 +02:00
Sakari Ailus
744910906d media: Documentation: Additional streams generally don't harm capture 
Having extra streams on the source end of the link that cannot be captured
by the sink sub-device generally are not an issue, at least not on CSI-2
bus. Still document that there may be hardware-specific limitations. For
example on parallel bus this might not work on all cases.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:36 +02:00
Sakari Ailus
89345c2a6f media: v4l: Support line-based metadata capture 
Many camera sensors, among other devices, transmit embedded data and image
data for each CSI-2 frame. This embedded data typically contains register
configuration of the sensor that has been used to capture the image data
of the same frame.

The embedded data is received by the CSI-2 receiver and has the same
properties as the image data, including that it is line based: it has
width, height and bytesperline (stride).

Add these fields to struct v4l2_meta_format and document them.

Also add V4L2_FMT_FLAG_META_LINE_BASED to tell a given format is
line-based i.e. these fields of struct v4l2_meta_format are valid for it.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:36 +02:00
Sakari Ailus
1d92152339 media: uapi: v4l: Add generic 8-bit metadata format definitions 
Generic 8-bit metadata formats define the in-memory data layout but not
the format of the data itself. The reasoning for having such formats is to
allow CSI-2 receiver drivers to receive and DMA drivers to write the data
to memory without knowing a large number of device-specific formats.

These formats may be used only in conjunction with a Media Controller
pipeline where the internal pad of the source sub-device defines the
specific format of the data (using an mbus code).

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:36 +02:00
Sakari Ailus
ac5214a473 media: uapi: Document which mbus format fields are valid for metadata 
Now that metadata mbus formats have been added, it is necessary to define
which fields in struct v4l2_mbus_format are applicable to them (not many).

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:36 +02:00
Sakari Ailus
f28bdda2f8 media: uapi: Add generic serial metadata mbus formats 
Add generic serial metadata mbus formats. These formats describe data
width and packing but not the content itself. The reason for specifying
such formats is that the formats as such are fairly device specific but
they are still handled by CSI-2 receiver drivers that should not be aware
of device specific formats. What makes generic metadata formats possible
is that these formats are parsed by software only, after capturing the
data to system memory.

Also add a definition for "Data Unit" to cover what is essentially a pixel
but is not image data.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:36 +02:00
Sakari Ailus
7ba432f01c media: Documentation: Add "stream" into glossary 
Add term "stream" to the glossary of the Media subsystem documentation.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:36 +02:00
Laurent Pinchart
c580efb94a media: v4l2-subdev: Clearly document that the crop API won't be extended 
The V4L2 subdev crop API has been marked as obsolete, deprecated by the
selection API. Despite this, it has recently been extended with streams
support. In hindsight this was a mistake. Make sure it doesn't happen
again by clearly documenting that no new extensions will be accepted.

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-29 14:56:36 +02:00
Hans Verkuil
e85bfd15c8 doc: media: v4l/func-open.rst: ENXIO should be ENODEV 
The error that V4L2 returns when an attempt is made to open an
unregisted device node is ENODEV, no ENXIO. Update the documentation.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-24 13:49:55 +02:00
Hans Verkuil
dd05fd125e media: cec: return -ENODEV instead of -ENXIO if unregistered 
If the CEC device is unregistered, then an attempt to open
the device node should result in an -ENODEV error instead of
-ENXIO.

Document this as well in cec-func-open.rst.

This is consistent with the error code returned by other
file operations such as ioctl.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-24 13:49:55 +02:00
Elizabeth Figura
b46271ec40 ntsync: Introduce NTSYNC_IOC_CREATE_SEM. 
This corresponds to the NT syscall NtCreateSemaphore().

Semaphores are one of three types of object to be implemented in this driver,
the others being mutexes and events.

An NT semaphore contains a 32-bit counter, and is signaled and can be acquired
when the counter is nonzero. The counter has a maximum value which is specified
at creation time. The initial value of the semaphore is also specified at
creation time. There are no restrictions on the maximum and initial value.

Each object is exposed as an file, to which any number of fds may be opened.
When all fds are closed, the object is deleted.

Objects hold a pointer to the ntsync_device that created them. The device's
reference count is driven by struct file.

Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20240329000621.148791-3-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 2024-04-11 15:34:38 +02:00
hanchunchao
533581379a media: docs: Remove the repeated word "the" in docs. 
Fix "The the" typo in the documentation.

Signed-off-by: hanchunchao <hanchunchao@inspur.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: added commit log]
 2024-04-08 13:48:19 +02:00
Matthijs Kooijman
655d3eb92c media: docs: Fix mem_offset name in multiplane example 
The v4l2_buffer type has an "offset" field, but the corresponding field
in the v4l2_plane type is called "mem_offset". Use the correct name in
this example.

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-04-08 13:48:19 +02:00
Hangbin Liu
a7408b56e5 ynl: support binary and integer sub-type for indexed-array 
Add binary and integer sub-type support for indexed-array to display bond
arp and ns targets. Here is what the result looks like:

 # ip link add bond0 type bond mode 1 \
   arp_ip_target 192.168.1.1,192.168.1.2 ns_ip6_target 2001::1,2001::2
 # ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_link.yaml \
   --do getlink --json '{"ifname": "bond0"}' --output-json | jq '.linkinfo'

    "arp-ip-target": [
      "192.168.1.1",
      "192.168.1.2"
    ],
    [...]
    "ns-ip6-target": [
      "2001::1",
      "2001::2"
    ],

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240404063114.1221532-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-04-05 22:32:49 -07:00
Hangbin Liu
aa6485d813 ynl: rename array-nest to indexed-array 
Some implementations, like bonding, has nest array with same attr type.
To support all kinds of entries under one nest array. As discussed[1],
let's rename array-nest to indexed-array, and assuming the value is
a nest by passing the type via sub-type.

[1] https://lore.kernel.org/netdev/20240312100105.16a59086@kernel.org/

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240404063114.1221532-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-04-05 22:32:49 -07:00
David Lechner
a261e208e1 Documentation: gpio: fix typo 
EOPNOTSUPP has two 'P's.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-04-02 10:50:28 +02:00
Benjamin Gaignard
a3293a8538 media: v4l2: Add REMOVE_BUFS ioctl 
VIDIOC_REMOVE_BUFS ioctl allows to remove buffers from a queue.
The number of buffers to remove in given by count field of
struct v4l2_remove_buffers and the range start at the index
specified in the same structure.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: vidioc-remove-bufs.rst: mention no bufs are freed on error]
 2024-03-25 12:00:44 +01:00
Linus Torvalds
eb7cca1faf media updates for v6.9-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmXz6uoACgkQCF8+vY7k
 4RX3MQ/+LOHOMkufbq9qxLtbq9/2Wrdzym0q6j2RzD4r2ou4+DPJS8kc7c4eX02M
 9G37SL5LbLVT5OjMEP7ShZtBSmbAoqqxJOPxCWII32M3PbcV0QTYrTJg4LdyLry+
 vZz1KqYqMOaCJk5oy41RrYwwB+dhYu19gXSbw73sXoxOI24m/MAErsf2WLSk/ojk
 lcz7UIOWWLOXH08im6+GoqFbMWv6j8a72J7mXdguu+k+dBou/TkPnND7dq5wC17S
 dRLzQyYUm0fRIya/Hnoj/Cd0yUn/8NVPogG8Om/Nqt8BvCLZEihvKSVc8NJukavD
 /3LlZ2oj39NzV6oRwpUdAwHFH7KXuEZM/aQX06Wl34AfXXpFleTBQD40kSo/AHIq
 Kg9GGL9Z2V7F1pHrx4VlouUpfGMS0lZig4oL70ZrFmz6jWVDE/Vg4xN9mOl6RraX
 S43fHP7abLSg8XvKDX+Gdb5/NzA3Zkom5EdIFLPEd2DBCS3n59KkFXQ3AqVm4XaK
 HV8WnIOw4qcmH4H/8yxUpLCd/s7ACNuT72pws9YWCZOGD+Wv2tHU21aFiCOiB5ol
 VlxBxttez3c3Il8UWJaaApCqM9Mn7bMMB/KMUSJzUt785cK0sS0/4D6cbYE0Zdqr
 9IancZHiKMzbN14rNAqjUX8sqNNzPtVPDISLuXsN7MvzfjlOFLE=
 =YxyV
 -----END PGP SIGNATURE-----

Merge tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - DVB budget legacy API was finally documented. It took only 20+ years
   to get some documentation about it...

 - hantro driver has gained support for STM32MP25 VDEC/VENC

 - rkisp1 has gained support for i.MX8MP

 - atomisp got rid of two items from its todo list. Still 5 items
   pending for moving it out of staging

 - lots of driver fixes, cleanups and improvements

* tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits)
  media: rcar-isp: Disallow unbind of devices
  media: usbtv: Remove useless locks in usbtv_video_free()
  media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
  media: ttpci: fix two memleaks in budget_av_attach
  media: go7007: fix a memleak in go7007_load_encoder
  media: dvb-frontends: avoid stack overflow warnings with clang
  media: pvrusb2: fix uaf in pvr2_context_set_notify
  media: usb: s2255: Refactor s2255_get_fx2fw
  media: ti: j721e-csi2rx: Convert to platform remove callback returning void
  media: stm32-dcmipp: Convert to platform remove callback returning void
  media: nxp: imx8-isi: Convert to platform remove callback returning void
  media: nuvoton: Convert to platform remove callback returning void
  media: chips-media: wave5: Convert to platform remove callback returning void
  media: chips-media: wave5: Remove unnecessary semicolons
  media: i2c: imx290: Fix IMX920 typo
  media: platform: replace of_graph_get_next_endpoint()
  media: i2c: replace of_graph_get_next_endpoint()
  media: ivsc: csi: Make use of sub-device state
  media: ivsc: csi: Swap SINK and SOURCE pads
  media: ipu-bridge: Serialise calls to IPU bridge init
  ...
 2024-03-15 11:36:54 -07:00
Linus Torvalds
35e886e88c Landlock updates for v6.9-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZfHmqxAcbWljQGRpZ2lr
 b2QubmV0AAoJEOXj0OiMgvbSvbABAIUF7nujsgnE9AykjhTKzg+by86mvXK0fdLG
 WVW0cwfgAP49daJb8JyZP9d6PvcgDfH4vV8E7r5PFeaICPdoOwg2Bg==
 =xJV1
 -----END PGP SIGNATURE-----

Merge tag 'landlock-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux

Pull landlock updates from Mickaël Salaün:
 "Some miscellaneous improvements, including new KUnit tests, extended
  documentation and boot help, and some cosmetic cleanups.

  Additional test changes already went through the net tree"

* tag 'landlock-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  samples/landlock: Don't error out if a file path cannot be opened
  landlock: Use f_cred in security_file_open() hook
  landlock: Rename "ptrace" files to "task"
  landlock: Simplify current_check_access_socket()
  landlock: Warn once if a Landlock action is requested while disabled
  landlock: Extend documentation for kernel support
  landlock: Add support for KUnit tests
  selftests/landlock: Clean up error logs related to capabilities
 2024-03-14 16:00:27 -07:00
Linus Torvalds
69afef4af4 gpio updates for v6.9 
Serialization rework:
 - use SRCU to serialize access to the global GPIO device list, to GPIO device
   structs themselves and to GPIO descriptors
 - make the GPIO subsystem resilient to the GPIO providers being unbound while
   the API calls are in progress
 - don't dereference the SRCU-protected chip pointer if the information we need
   can be obtained from the GPIO device structure
 - move some of the information contained in struct gpio_chip to struct
   gpio_device to further reduce the need to dereference the former
 - pass the GPIO device struct instead of the GPIO chip to sysfs callback to,
   again, reduce the need for accessing the latter
 - get GPIO descriptors from the GPIO device, not from the chip for the same
   reason
 - allow for mostly lockless operation of the GPIO driver API: assure
   consistency with SRCU and atomic operations
 - remove the global GPIO spinlock
 - remove the character device RW semaphore
 
 Core GPIOLIB:
 - constify pointers in GPIO API where applicable
 - unify the GPIO counting APIs for ACPI and OF
 - provide a macro for iterating over all GPIOs, not only the ones that are
   requested
 - remove leftover typedefs
 - pass the consumer device to GPIO core in devm_fwnode_gpiod_get_index() for
   improved logging
 - constify the GPIO bus type
 - don't warn about removing GPIO chips with descriptors still held by users as
   we can now handle this situation gracefully
 - remove unused logging helpers
 - unexport functions that are only used internally in the GPIO subsystem
 - set the device type (assign the relevant struct device_type) for GPIO devices
 
 New drivers:
 - add the ChromeOS EC GPIO driver
 
 Driver improvements:
 - allow building gpio-vf610 with COMPILE_TEST as well as disabling it in
   menuconfig (before it was always built for i.MX cofigs)
 - count the number of EICs using the device properties instead of hard-coding
   it in gpio-eic-sprd
 - improve the device naming, extend the debugfs output and add lockdep asserts
   to gpio-sim
 
 DT bindings:
 - document the 'label' property for gpio-pca9570
 - convert aspeed,ast2400-gpio bindings to DT schema
 - disallow unevaluated properties for gpio-mvebu
 - document a new model in renesas,rcar-gpio
 
 Documentation:
 - improve the character device kerneldocs in user-space headers
 - add proper documentation for the character device uAPI (both v1 and v2)
 - move the sysfs and gpio-mockup docs into the "obsolete" section
 - improve naming consistency for GPIO terms
 - clarify the line values description for sysfs
 - minor docs improvements
 - improve the driver API contract for setting GPIO direction
 - mark unsafe APIs as deprecated in kerneldocs and suggest replacements
 
 Other:
 - remove an obsolete test from selftests
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmXu1ecACgkQEacuoBRx
 13JR7w//R3TswZ1uC9qkRjat9eA2KZUaI2QChlS7V/yXVcDHynuTlO/ZQmnnMdYL
 ch7T2cjPcW0OCt0UhcjamUmYtWaxe1e5GU3E42EosWUsojEzgGs0iNKe0R4SHYzv
 whlkFqO8+8IctYhiMpAU1PzP9N4YBqypwgCrTqHIrYuhz3MbPQxtCMkr7g0LTo8u
 Z3K0D3Y0LuwISWNYYhA20Bwemn1fEHXJ9f3pTeNaGh2dGZek9k9xd0zWcCxwhaYD
 CBTBiZXf57TUTJ2u+JG+au1ghEmmvBPlMpza+fazypbcvsiQxdGvv5QH1bTwyt4B
 woGq+biLLvlwfJ8BT7+09uni7gUyNL3wWkixlx/8Slkyti4xWqgZQ3WnhwN8yS4Y
 DbkTtzH/PIsjr1dZw6rnGoXi80lBEaok7LeI0QhybopTXQI+CnIbE/RBhzly8Mf8
 1cAVFjrF2gPuaTuheakRBw4LOhegf4a485fadJVEUeEpeF7/p9rDQWAbgohYUnCE
 gHPwkTOJuOZp+BlsTOyspnqxWnDVMtCnmi+q1o7JvEgXqAtzU7+1gz/wDpfsHgHQ
 oze6V2JvD2R3JkHmdqcIzq5yNwk1rOguOY3saNiwSk95JY+A8vhAe/gVykklKDXX
 oX/DPwlVd/0OR+0HCQ3r0pXK8BSRQ9qm/nUZNnLB+Rts9K1peIU=
 =LX+L
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "The biggest feature is the locking overhaul. Up until now the
  synchronization in the GPIO subsystem was broken. There was a single
  spinlock "protecting" multiple data structures but doing it wrong (as
  evidenced by several places where it would be released when a sleeping
  function was called and then reacquired without checking the protected
  state).

  We tried to use an RW semaphore before but the main issue with GPIO is
  that we have drivers implementing the interfaces in both sleeping and
  non-sleeping ways as well as user-facing interfaces that can be called
  both from process as well as atomic contexts. Both ends converge in
  the same code paths that can use neither spinlocks nor mutexes. The
  only reasonable way out is to use SRCU and go mostly lockless. To that
  end: we add several SRCU structs in relevant places and use them to
  assure consistency between API calls together with atomic reads and
  writes of GPIO descriptor flags where it makes sense.

  This code has spent several weeks in next and has received several
  fixes in the first week or two after which it stabilized nicely. The
  GPIO subsystem is now resilient to providers being suddenly unbound.
  We managed to also remove the existing character device RW semaphore
  and the obsolete global spinlock.

  Other than the locking rework we have one new driver (for Chromebook
  EC), much appreciated documentation improvements from Kent and the
  regular driver improvements, DT-bindings updates and GPIOLIB core
  tweaks.

  Serialization rework:
   - use SRCU to serialize access to the global GPIO device list, to
     GPIO device structs themselves and to GPIO descriptors
   - make the GPIO subsystem resilient to the GPIO providers being
     unbound while the API calls are in progress
   - don't dereference the SRCU-protected chip pointer if the
     information we need can be obtained from the GPIO device structure
   - move some of the information contained in struct gpio_chip to
     struct gpio_device to further reduce the need to dereference the
     former
   - pass the GPIO device struct instead of the GPIO chip to sysfs
     callback to, again, reduce the need for accessing the latter
   - get GPIO descriptors from the GPIO device, not from the chip for
     the same reason
   - allow for mostly lockless operation of the GPIO driver API: assure
     consistency with SRCU and atomic operations
   - remove the global GPIO spinlock
   - remove the character device RW semaphore

  Core GPIOLIB:
   - constify pointers in GPIO API where applicable
   - unify the GPIO counting APIs for ACPI and OF
   - provide a macro for iterating over all GPIOs, not only the ones
     that are requested
   - remove leftover typedefs
   - pass the consumer device to GPIO core in
     devm_fwnode_gpiod_get_index() for improved logging
   - constify the GPIO bus type
   - don't warn about removing GPIO chips with descriptors still held by
     users as we can now handle this situation gracefully
   - remove unused logging helpers
   - unexport functions that are only used internally in the GPIO
     subsystem
   - set the device type (assign the relevant struct device_type) for
     GPIO devices

  New drivers:
   - add the ChromeOS EC GPIO driver

  Driver improvements:
   - allow building gpio-vf610 with COMPILE_TEST as well as disabling it
     in menuconfig (before it was always built for i.MX cofigs)
   - count the number of EICs using the device properties instead of
     hard-coding it in gpio-eic-sprd
   - improve the device naming, extend the debugfs output and add
     lockdep asserts to gpio-sim

  DT bindings:
   - document the 'label' property for gpio-pca9570
   - convert aspeed,ast2400-gpio bindings to DT schema
   - disallow unevaluated properties for gpio-mvebu
   - document a new model in renesas,rcar-gpio

  Documentation:
   - improve the character device kerneldocs in user-space headers
   - add proper documentation for the character device uAPI (both v1 and v2)
   - move the sysfs and gpio-mockup docs into the "obsolete" section
   - improve naming consistency for GPIO terms
   - clarify the line values description for sysfs
   - minor docs improvements
   - improve the driver API contract for setting GPIO direction
   - mark unsafe APIs as deprecated in kerneldocs and suggest
     replacements

  Other:
   - remove an obsolete test from selftests"

* tag 'gpio-updates-for-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
  gpio: sysfs: repair export returning -EPERM on 1st attempt
  selftest: gpio: remove obsolete gpio-mockup test
  gpiolib: Deduplicate cleanup for-loop in gpiochip_add_data_with_key()
  dt-bindings: gpio: aspeed,ast2400-gpio: Convert to DT schema
  gpio: acpi: Make acpi_gpio_count() take firmware node as a parameter
  gpio: of: Make of_gpio_get_count() take firmware node as a parameter
  gpiolib: Pass consumer device through to core in devm_fwnode_gpiod_get_index()
  gpio: sim: use for_each_hwgpio()
  gpio: provide for_each_hwgpio()
  gpio: don't warn about removing GPIO chips with active users anymore
  gpio: sim: delimit the fwnode name with a ":" when generating labels
  gpio: sim: add lockdep asserts
  gpio: Add ChromeOS EC GPIO driver
  gpio: constify of_phandle_args in of_find_gpio_device_by_xlate()
  gpio: fix memory leak in gpiod_request_commit()
  gpio: constify opaque pointer "data" in gpio_device_find()
  gpio: cdev: fix a NULL-pointer dereference with DEBUG enabled
  gpio: uapi: clarify default_values being logical
  gpio: sysfs: fix inverted pointer logic
  gpio: don't let lockdep complain about inherently dangerous RCU usage
  ...
 2024-03-13 11:14:55 -07:00
Linus Torvalds
9187210eee Networking changes for 6.9. 
Core & protocols
 ----------------
 
  - Large effort by Eric to lower rtnl_lock pressure and remove locks:
 
    - Make commonly used parts of rtnetlink (address, route dumps etc.)
      lockless, protected by RCU instead of rtnl_lock.
 
    - Add a netns exit callback which already holds rtnl_lock,
      allowing netns exit to take rtnl_lock once in the core
      instead of once for each driver / callback.
 
    - Remove locks / serialization in the socket diag interface.
 
    - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.
 
    - Remove the dev_base_lock, depend on RCU where necessary.
 
  - Support busy polling on a per-epoll context basis. Poll length
    and budget parameters can be set independently of system defaults.
 
  - Introduce struct net_hotdata, to make sure read-mostly global config
    variables fit in as few cache lines as possible.
 
  - Add optional per-nexthop statistics to ease monitoring / debug
    of ECMP imbalance problems.
 
  - Support TCP_NOTSENT_LOWAT in MPTCP.
 
  - Ensure that IPv6 temporary addresses' preferred lifetimes are long
    enough, compared to other configured lifetimes, and at least 2 sec.
 
  - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.
 
  - Add support for the independent control state machine for bonding
    per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
    control state machine.
 
  - Add "network ID" to MCTP socket APIs to support hosts with multiple
    disjoint MCTP networks.
 
  - Re-use the mono_delivery_time skbuff bit for packets which user
    space wants to be sent at a specified time. Maintain the timing
    information while traversing veth links, bridge etc.
 
  - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.
 
  - Simplify many places iterating over netdevs by using an xarray
    instead of a hash table walk (hash table remains in place, for
    use on fastpaths).
 
  - Speed up scanning for expired routes by keeping a dedicated list.
 
  - Speed up "generic" XDP by trying harder to avoid large allocations.
 
  - Support attaching arbitrary metadata to netconsole messages.
 
 Things we sprinkled into general kernel code
 --------------------------------------------
 
  - Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
    VM_SPARSE kind and vm_area_[un]map_pages (used by bpf_arena).
 
  - Rework selftest harness to enable the use of the full range of
    ksft exit code (pass, fail, skip, xfail, xpass).
 
 Netfilter
 ---------
 
  - Allow userspace to define a table that is exclusively owned by a daemon
    (via netlink socket aliveness) without auto-removing this table when
    the userspace program exits. Such table gets marked as orphaned and
    a restarting management daemon can re-attach/regain ownership.
 
  - Speed up element insertions to nftables' concatenated-ranges set type.
    Compact a few related data structures.
 
 BPF
 ---
 
  - Add BPF token support for delegating a subset of BPF subsystem
    functionality from privileged system-wide daemons such as systemd
    through special mount options for userns-bound BPF fs to a trusted
    & unprivileged application.
 
  - Introduce bpf_arena which is sparse shared memory region between BPF
    program and user space where structures inside the arena can have
    pointers to other areas of the arena, and pointers work seamlessly
    for both user-space programs and BPF programs.
 
  - Introduce may_goto instruction that is a contract between the verifier
    and the program. The verifier allows the program to loop assuming it's
    behaving well, but reserves the right to terminate it.
 
  - Extend the BPF verifier to enable static subprog calls in spin lock
    critical sections.
 
  - Support registration of struct_ops types from modules which helps
    projects like fuse-bpf that seeks to implement a new struct_ops type.
 
  - Add support for retrieval of cookies for perf/kprobe multi links.
 
  - Support arbitrary TCP SYN cookie generation / validation in the TC
    layer with BPF to allow creating SYN flood handling in BPF firewalls.
 
  - Add code generation to inline the bpf_kptr_xchg() helper which
    improves performance when stashing/popping the allocated BPF objects.
 
 Wireless
 --------
 
  - Add SPP (signaling and payload protected) AMSDU support.
 
  - Support wider bandwidth OFDMA, as required for EHT operation.
 
 Driver API
 ----------
 
  - Major overhaul of the Energy Efficient Ethernet internals to support
    new link modes (2.5GE, 5GE), share more code between drivers
    (especially those using phylib), and encourage more uniform behavior.
    Convert and clean up drivers.
 
  - Define an API for querying per netdev queue statistics from drivers.
 
  - IPSec: account in global stats for fully offloaded sessions.
 
  - Create a concept of Ethernet PHY Packages at the Device Tree level,
    to allow parameterizing the existing PHY package code.
 
  - Enable Rx hashing (RSS) on GTP protocol fields.
 
 Misc
 ----
 
  - Improvements and refactoring all over networking selftests.
 
  - Create uniform module aliases for TC classifiers, actions,
    and packet schedulers to simplify creating modprobe policies.
 
  - Address all missing MODULE_DESCRIPTION() warnings in networking.
 
  - Extend the Netlink descriptions in YAML to cover message encapsulation
    or "Netlink polymorphism", where interpretation of nested attributes
    depends on link type, classifier type or some other "class type".
 
 Drivers
 -------
 
  - Ethernet high-speed NICs:
    - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
    - Intel (100G, ice, idpf):
      - support E825-C devices
    - nVidia/Mellanox:
      - support devices with one port and multiple PCIe links
    - Broadcom (bnxt):
      - support n-tuple filters
      - support configuring the RSS key
    - Wangxun (ngbe/txgbe):
      - implement irq_domain for TXGBE's sub-interrupts
    - Pensando/AMD:
      - support XDP
      - optimize queue submission and wakeup handling (+17% bps)
      - optimize struct layout, saving 28% of memory on queues
 
  - Ethernet NICs embedded and virtual:
    - Google cloud vNIC:
      - refactor driver to perform memory allocations for new queue
        config before stopping and freeing the old queue memory
    - Synopsys (stmmac):
      - obey queueMaxSDU and implement counters required by 802.1Qbv
    - Renesas (ravb):
      - support packet checksum offload
      - suspend to RAM and runtime PM support
 
  - Ethernet switches:
    - nVidia/Mellanox:
      - support for nexthop group statistics
    - Microchip:
      - ksz8: implement PHY loopback
      - add support for KSZ8567, a 7-port 10/100Mbps switch
 
  - PTP:
    - New driver for RENESAS FemtoClock3 Wireless clock generator.
    - Support OCP PTP cards designed and built by Adva.
 
  - CAN:
    - Support recvmsg() flags for own, local and remote traffic
      on CAN BCM sockets.
    - Support for esd GmbH PCIe/402 CAN device family.
    - m_can:
      - Rx/Tx submission coalescing
      - wake on frame Rx
 
  - WiFi:
    - Intel (iwlwifi):
      - enable signaling and payload protected A-MSDUs
      - support wider-bandwidth OFDMA
      - support for new devices
      - bump FW API to 89 for AX devices; 90 for BZ/SC devices
    - MediaTek (mt76):
      - mt7915: newer ADIE version support
      - mt7925: radio temperature sensor support
    - Qualcomm (ath11k):
      - support 6 GHz station power modes: Low Power Indoor (LPI),
        Standard Power) SP and Very Low Power (VLP)
      - QCA6390 & WCN6855: support 2 concurrent station interfaces
      - QCA2066 support
    - Qualcomm (ath12k):
      - refactoring in preparation for Multi-Link Operation (MLO) support
      - 1024 Block Ack window size support
      - firmware-2.bin support
      - support having multiple identical PCI devices (firmware needs to
        have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
      - QCN9274: support split-PHY devices
      - WCN7850: enable Power Save Mode in station mode
      - WCN7850: P2P support
    - RealTek:
      - rtw88: support for more rtw8811cu and rtw8821cu devices
      - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
      - rtlwifi: speed up USB firmware initialization
      - rtwl8xxxu:
        - RTL8188F: concurrent interface support
        - Channel Switch Announcement (CSA) support in AP mode
    - Broadcom (brcmfmac):
      - per-vendor feature support
      - per-vendor SAE password setup
      - DMI nvram filename quirk for ACEPC W5 Pro
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmXv0mgACgkQMUZtbf5S
 IrtgMxAAuRd+WJW++SENr4KxIWhYO1q6Xcxnai43wrNkan9swD24icG8TYALt4f3
 yoT6idQvWReAb5JNlh9rUQz8R7E0nJXlvEFn5MtJwcthx2C6wFo/XkJlddlRrT+j
 c2xGILwLjRhW65LaC0MZ2ECbEERkFz8xcGfK2SWzUgh6KYvPjcRfKFxugpM7xOQK
 P/Wnqhs4fVRS/Mj/bCcXcO+yhwC121Q3qVeQVjGS0AzEC65hAW87a/kc2BfgcegD
 EyI9R7mf6criQwX+0awubjfoIdr4oW/8oDVNvUDczkJkbaEVaLMQk9P5x/0XnnVS
 UHUchWXyI80Q8Rj12uN1/I0h3WtwNQnCRBuLSmtm6GLfCAwbLvp2nGWDnaXiqryW
 DVKUIHGvqPKjkOOMOVfSvfB3LvkS3xsFVVYiQBQCn0YSs/gtu4CoF2Nty9CiLPbK
 tTuxUnLdPDZDxU//l0VArZmP8p2JM7XQGJ+JH8GFH4SBTyBR23e0iyPSoyaxjnYn
 RReDnHMVsrS1i7GPhbqDJWn+uqMSs7N149i0XmmyeqwQHUVSJN3J2BApP2nCaDfy
 H2lTuYly5FfEezt61NvCE4qr/VsWeEjm1fYlFQ9dFn4pGn+HghyCpw+xD1ZN56DN
 lujemau5B3kk1UTtAT4ypPqvuqjkRFqpNV2LzsJSk/Js+hApw8Y=
 =oY52
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Large effort by Eric to lower rtnl_lock pressure and remove locks:

      - Make commonly used parts of rtnetlink (address, route dumps
        etc) lockless, protected by RCU instead of rtnl_lock.

      - Add a netns exit callback which already holds rtnl_lock,
        allowing netns exit to take rtnl_lock once in the core instead
        of once for each driver / callback.

      - Remove locks / serialization in the socket diag interface.

      - Remove 6 calls to synchronize_rcu() while holding rtnl_lock.

      - Remove the dev_base_lock, depend on RCU where necessary.

   - Support busy polling on a per-epoll context basis. Poll length and
     budget parameters can be set independently of system defaults.

   - Introduce struct net_hotdata, to make sure read-mostly global
     config variables fit in as few cache lines as possible.

   - Add optional per-nexthop statistics to ease monitoring / debug of
     ECMP imbalance problems.

   - Support TCP_NOTSENT_LOWAT in MPTCP.

   - Ensure that IPv6 temporary addresses' preferred lifetimes are long
     enough, compared to other configured lifetimes, and at least 2 sec.

   - Support forwarding of ICMP Error messages in IPSec, per RFC 4301.

   - Add support for the independent control state machine for bonding
     per IEEE 802.1AX-2008 5.4.15 in addition to the existing coupled
     control state machine.

   - Add "network ID" to MCTP socket APIs to support hosts with multiple
     disjoint MCTP networks.

   - Re-use the mono_delivery_time skbuff bit for packets which user
     space wants to be sent at a specified time. Maintain the timing
     information while traversing veth links, bridge etc.

   - Take advantage of MSG_SPLICE_PAGES for RxRPC DATA and ACK packets.

   - Simplify many places iterating over netdevs by using an xarray
     instead of a hash table walk (hash table remains in place, for use
     on fastpaths).

   - Speed up scanning for expired routes by keeping a dedicated list.

   - Speed up "generic" XDP by trying harder to avoid large allocations.

   - Support attaching arbitrary metadata to netconsole messages.

  Things we sprinkled into general kernel code:

   - Enforce VM_IOREMAP flag and range in ioremap_page_range and
     introduce VM_SPARSE kind and vm_area_[un]map_pages (used by
     bpf_arena).

   - Rework selftest harness to enable the use of the full range of ksft
     exit code (pass, fail, skip, xfail, xpass).

  Netfilter:

   - Allow userspace to define a table that is exclusively owned by a
     daemon (via netlink socket aliveness) without auto-removing this
     table when the userspace program exits. Such table gets marked as
     orphaned and a restarting management daemon can re-attach/regain
     ownership.

   - Speed up element insertions to nftables' concatenated-ranges set
     type. Compact a few related data structures.

  BPF:

   - Add BPF token support for delegating a subset of BPF subsystem
     functionality from privileged system-wide daemons such as systemd
     through special mount options for userns-bound BPF fs to a trusted
     & unprivileged application.

   - Introduce bpf_arena which is sparse shared memory region between
     BPF program and user space where structures inside the arena can
     have pointers to other areas of the arena, and pointers work
     seamlessly for both user-space programs and BPF programs.

   - Introduce may_goto instruction that is a contract between the
     verifier and the program. The verifier allows the program to loop
     assuming it's behaving well, but reserves the right to terminate
     it.

   - Extend the BPF verifier to enable static subprog calls in spin lock
     critical sections.

   - Support registration of struct_ops types from modules which helps
     projects like fuse-bpf that seeks to implement a new struct_ops
     type.

   - Add support for retrieval of cookies for perf/kprobe multi links.

   - Support arbitrary TCP SYN cookie generation / validation in the TC
     layer with BPF to allow creating SYN flood handling in BPF
     firewalls.

   - Add code generation to inline the bpf_kptr_xchg() helper which
     improves performance when stashing/popping the allocated BPF
     objects.

  Wireless:

   - Add SPP (signaling and payload protected) AMSDU support.

   - Support wider bandwidth OFDMA, as required for EHT operation.

  Driver API:

   - Major overhaul of the Energy Efficient Ethernet internals to
     support new link modes (2.5GE, 5GE), share more code between
     drivers (especially those using phylib), and encourage more
     uniform behavior. Convert and clean up drivers.

   - Define an API for querying per netdev queue statistics from
     drivers.

   - IPSec: account in global stats for fully offloaded sessions.

   - Create a concept of Ethernet PHY Packages at the Device Tree level,
     to allow parameterizing the existing PHY package code.

   - Enable Rx hashing (RSS) on GTP protocol fields.

  Misc:

   - Improvements and refactoring all over networking selftests.

   - Create uniform module aliases for TC classifiers, actions, and
     packet schedulers to simplify creating modprobe policies.

   - Address all missing MODULE_DESCRIPTION() warnings in networking.

   - Extend the Netlink descriptions in YAML to cover message
     encapsulation or "Netlink polymorphism", where interpretation of
     nested attributes depends on link type, classifier type or some
     other "class type".

  Drivers:

   - Ethernet high-speed NICs:
      - Add a new driver for Marvell's Octeon PCI Endpoint NIC VF.
      - Intel (100G, ice, idpf):
         - support E825-C devices
      - nVidia/Mellanox:
         - support devices with one port and multiple PCIe links
      - Broadcom (bnxt):
         - support n-tuple filters
         - support configuring the RSS key
      - Wangxun (ngbe/txgbe):
         - implement irq_domain for TXGBE's sub-interrupts
      - Pensando/AMD:
         - support XDP
         - optimize queue submission and wakeup handling (+17% bps)
         - optimize struct layout, saving 28% of memory on queues

   - Ethernet NICs embedded and virtual:
      - Google cloud vNIC:
         - refactor driver to perform memory allocations for new queue
           config before stopping and freeing the old queue memory
      - Synopsys (stmmac):
         - obey queueMaxSDU and implement counters required by 802.1Qbv
      - Renesas (ravb):
         - support packet checksum offload
         - suspend to RAM and runtime PM support

   - Ethernet switches:
      - nVidia/Mellanox:
         - support for nexthop group statistics
      - Microchip:
         - ksz8: implement PHY loopback
         - add support for KSZ8567, a 7-port 10/100Mbps switch

   - PTP:
      - New driver for RENESAS FemtoClock3 Wireless clock generator.
      - Support OCP PTP cards designed and built by Adva.

   - CAN:
      - Support recvmsg() flags for own, local and remote traffic on CAN
        BCM sockets.
      - Support for esd GmbH PCIe/402 CAN device family.
      - m_can:
         - Rx/Tx submission coalescing
         - wake on frame Rx

   - WiFi:
      - Intel (iwlwifi):
         - enable signaling and payload protected A-MSDUs
         - support wider-bandwidth OFDMA
         - support for new devices
         - bump FW API to 89 for AX devices; 90 for BZ/SC devices
      - MediaTek (mt76):
         - mt7915: newer ADIE version support
         - mt7925: radio temperature sensor support
      - Qualcomm (ath11k):
         - support 6 GHz station power modes: Low Power Indoor (LPI),
           Standard Power) SP and Very Low Power (VLP)
         - QCA6390 & WCN6855: support 2 concurrent station interfaces
         - QCA2066 support
      - Qualcomm (ath12k):
         - refactoring in preparation for Multi-Link Operation (MLO)
           support
         - 1024 Block Ack window size support
         - firmware-2.bin support
         - support having multiple identical PCI devices (firmware needs
           to have ATH12K_FW_FEATURE_MULTI_QRTR_ID)
         - QCN9274: support split-PHY devices
         - WCN7850: enable Power Save Mode in station mode
         - WCN7850: P2P support
      - RealTek:
         - rtw88: support for more rtw8811cu and rtw8821cu devices
         - rtw89: support SCAN_RANDOM_SN and SET_SCAN_DWELL
         - rtlwifi: speed up USB firmware initialization
         - rtwl8xxxu:
             - RTL8188F: concurrent interface support
             - Channel Switch Announcement (CSA) support in AP mode
      - Broadcom (brcmfmac):
         - per-vendor feature support
         - per-vendor SAE password setup
         - DMI nvram filename quirk for ACEPC W5 Pro"

* tag 'net-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2255 commits)
  nexthop: Fix splat with CONFIG_DEBUG_PREEMPT=y
  nexthop: Fix out-of-bounds access during attribute validation
  nexthop: Only parse NHA_OP_FLAGS for dump messages that require it
  nexthop: Only parse NHA_OP_FLAGS for get messages that require it
  bpf: move sleepable flag from bpf_prog_aux to bpf_prog
  bpf: hardcode BPF_PROG_PACK_SIZE to 2MB * num_possible_nodes()
  selftests/bpf: Add kprobe multi triggering benchmarks
  ptp: Move from simple ida to xarray
  vxlan: Remove generic .ndo_get_stats64
  vxlan: Do not alloc tstats manually
  devlink: Add comments to use netlink gen tool
  nfp: flower: handle acti_netdevs allocation failure
  net/packet: Add getsockopt support for PACKET_COPY_THRESH
  net/netlink: Add getsockopt support for NETLINK_LISTEN_ALL_NSID
  selftests/bpf: Add bpf_arena_htab test.
  selftests/bpf: Add bpf_arena_list test.
  selftests/bpf: Add unit tests for bpf_arena_alloc/free_pages
  bpf: Add helper macro bpf_addr_space_cast()
  libbpf: Recognize __arena global variables.
  bpftool: Recognize arena map type
  ...
 2024-03-12 17:44:08 -07:00
Linus Torvalds
1f44039766 A moderatly busy cycle for development this time around. 
- Some cleanup of the main index page for easier navigation
 
 - Rework some of the other top-level pages for better readability and, with
   luck, fewer merge conflicts in the future.
 
 - Submit-checklist improvements, hopefully the first of many.
 
 - New Italian translations
 
 - A fair number of kernel-doc fixes and improvements.  We have also dropped
   the recommendation to use an old version of Sphinx.
 
 - A new document from Thorsten on bisection
 
 ...and lots of fixes and updates.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmXvKVIACgkQF0NaE2wM
 flik1gf/ZFS1mHwDdmHA/vpx8UxdUlFEo0Pms8V24iPSW5aEIqkZ406c9DSyMTtp
 CXTzW+RSCfB1Q3ciYtakHBgv0RzZ5+RyaEZ1l7zVmMyw4nYvK6giYKmg8Y0EVPKI
 fAVuPWo5iE7io0sNVbKBKJJkj9Z8QEScM48hv/CV1FblMvHYn0lie6muJrF9G6Ez
 HND+hlYZtWkbRd5M86CDBiFeGMLVPx17T+psQyQIcbUYm9b+RUqZRHIVRLYbad7r
 18r9+83DsOhXTVJCBBSfCSZwzF8yAm+eD1w47sxnSItF8OiIjqCzQgXs3BZe9TXH
 h2YyeWbMN3xByA4mEgpmOPP44RW7Pg==
 =SC60
 -----END PGP SIGNATURE-----

Merge tag 'docs-6.9' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
 "A moderatly busy cycle for development this time around.

   - Some cleanup of the main index page for easier navigation

   - Rework some of the other top-level pages for better readability
     and, with luck, fewer merge conflicts in the future.

   - Submit-checklist improvements, hopefully the first of many.

   - New Italian translations

   - A fair number of kernel-doc fixes and improvements. We have also
     dropped the recommendation to use an old version of Sphinx.

   - A new document from Thorsten on bisection

  ... and lots of fixes and updates"

* tag 'docs-6.9' of git://git.lwn.net/linux: (54 commits)
  docs: verify/bisect: fixes, finetuning, and support for Arch
  docs: Makefile: Add dependency to $(YNL_INDEX) for targets other than htmldocs
  docs: Move ja_JP/howto.rst to ja_JP/process/howto.rst
  docs: submit-checklist: use subheadings
  docs: submit-checklist: structure by category
  docs: new text on bisecting which also covers bug validation
  docs: drop the version constraints for sphinx and dependencies
  docs: kerneldoc-preamble.sty: Remove code for Sphinx <2.4
  docs: Restore "smart quotes" for quotes
  docs/zh_CN: accurate translation of "function"
  docs: Include simplified link titles in main index
  docs: Correct formatting of title in admin-guide/index.rst
  docs: kernel_feat.py: fix build error for missing files
  MAINTAINERS: Set the field name for subsystem profile section
  kasan: Add documentation for CONFIG_KASAN_EXTRA_INFO
  Fixed case issue with 'fault-injection' in documentation
  kernel-doc: handle #if in enums as well
  Documentation: update mailing list addresses
  doc: kerneldoc.py: fix indentation
  scripts/kernel-doc: simplify signature printing
  ...
 2024-03-12 15:18:34 -07:00
Mickaël Salaün
0e89ef6f79
landlock: Extend documentation for kernel support 
Extend the kernel support section with one subsection for build time
configuration and another for boot time configuration.

Extend the boot time subsection with a concrete example.

Update the journalctl command to include the boot option.

Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20240227110550.3702236-1-mic@digikod.net
[mic: Improve wording as suggested by Günther]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
 2024-03-07 11:29:34 +01:00
Joe Damato
18e2bf0edf eventpoll: Add epoll ioctl for epoll_params 
Add an ioctl for getting and setting epoll_params. User programs can use
this ioctl to get and set the busy poll usec time, packet budget, and
prefer busy poll params for a specific epoll context.

Parameters are limited:
  - busy_poll_usecs is limited to <= s32_max
  - busy_poll_budget is limited to <= NAPI_POLL_WEIGHT by unprivileged
    users (!capable(CAP_NET_ADMIN))
  - prefer_busy_poll must be 0 or 1
  - __pad must be 0

Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
 2024-02-14 11:01:01 +00:00
Kent Gibson
9e69d6d84e Documentation: gpio: clarify sysfs line values are logical 
Clarify that line values are logical, not physical, by replacing high/low
terminology with active/inactive.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <amdy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-02-14 10:28:48 +01:00
Kent Overstreet
41bcbe59c3
fs: FS_IOC_GETUUID 
Add a new generic ioctls for querying the filesystem UUID.

These are lifted versions of the ext4 ioctls, with one change: we're not
using a flexible array member, because UUIDs will never be more than 16
bytes.

This patch adds a generic implementation of FS_IOC_GETFSUUID, which
reads from super_block->s_uuid. We're not lifting SETFSUUID from ext4 -
that can be done on offline filesystems by the people who need it,
trying to do it online is just asking for too much trouble.

Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lore.kernel.org/r/20240207025624.1019754-4-kent.overstreet@linux.dev
Signed-off-by: Christian Brauner <brauner@kernel.org>
 2024-02-08 21:20:11 +01:00
Stefan Herdler
9651d3d2d6 media: docs: uAPI: dvb/decoder: completing the documentation 
The existing documentation of the legacy DVB Decoder API was incomplete.

Revising the documentation, adding missing parts and arranging the
documentation files new.

This patch contains the new index file and links to it.

Link: https://lore.kernel.org/linux-media/20240128233249.32794-2-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
 2024-02-07 06:05:45 +01:00
Stefan Herdler
b2fffe3fd4 media: docs: uAPI: dvb/video: completing the documentation (function calls) 
The existing documentation of the legacy DVB Decoder API was incomplete.

Revising the documentation, adding missing parts and arranging the
documentation files new.

This patch contains the documentation of the function calls defined in
video.h.

Link: https://lore.kernel.org/linux-media/20240128233249.32794-7-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
 2024-02-07 05:54:26 +01:00
Stefan Herdler
6fb68c13bd media: docs: uAPI: dvb/video: completing the documentation (data types) 
The existing documentation of the legacy DVB Decoder API was incomplete.

Revising the documentation, adding missing parts and arranging the
documentation files new.

This patch contains the documentation of the data types defined in
video.h.

Link: https://lore.kernel.org/linux-media/20240128233249.32794-6-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
 2024-02-07 05:54:26 +01:00
Stefan Herdler
53614720e0 media: docs: uAPI: dvb/audio: completing the documentation (function calls) 
The existing documentation of the legacy DVB Decoder API was incomplete.

Revising the documentation, adding missing parts and arranging the
documentation files new.

This patch contains the documentation of the function calls defined in
audio.h.

Link: https://lore.kernel.org/linux-media/20240128233249.32794-5-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
 2024-02-07 05:54:26 +01:00
Stefan Herdler
2c7ff90604 media: docs: uAPI: dvb/audio: completing the documentation (data types) 
The existing documentation of the legacy DVB Decoder API was incomplete.

Revising the documentation, adding missing parts and arranging the
documentation files new.

This patch contains the documentation of the data types defined in
audio.h.

Link: https://lore.kernel.org/linux-media/20240128233249.32794-4-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
 2024-02-07 05:54:26 +01:00
Stefan Herdler
7976b003e8 media: docs: uAPI: dvb/osd: completing the documentation 
The existing documentation of the legacy DVB Decoder API was incomplete.

Revising the documentation, adding missing parts and arranging the
documentation files new.

This patch contains the documentation of osd.h.

Link: https://lore.kernel.org/linux-media/20240128233249.32794-3-herdler@nurfuerspam.de
Signed-off-by: Stefan Herdler <herdler@nurfuerspam.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
 2024-02-07 05:54:26 +01:00
Laurent Pinchart
b3decc5ce7 media: mc: Expand MUST_CONNECT flag to always require an enabled link 
The MEDIA_PAD_FL_MUST_CONNECT flag indicates that the pad requires an
enabled link to stream, but only if it has any link at all. This makes
little sense, as if a pad is part of a pipeline, there are very few use
cases for an active link to be mandatory only if links exist at all. A
review of in-tree drivers confirms they all need an enabled link for
pads marked with the MEDIA_PAD_FL_MUST_CONNECT flag.

Expand the scope of the flag by rejecting pads that have no links at
all. This requires modifying the pipeline build code to add those pads
to the pipeline.

Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-02-05 14:29:34 +01:00
Hans Verkuil
fd4f587389 media: vidioc-subdev-g-client-cap.rst: document struct v4l2_subdev_client_capability 
The struct v4l2_subdev_client_capability was never actually documented,
only the capability flags were documented.

Add this.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2024-02-05 12:57:44 +01:00
Sakari Ailus
c06983f853 media: Documentation: Rework CCS driver documentation 
Drop duplicated UAPI specific portions of the CCS (kernel) documentation
and fix a spelling error in UAPI documentation previously fixed in driver
documentation.

Also add references both ways.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
 2024-02-01 13:20:10 +01:00
Donald Hunter
9d6429c339 doc/netlink: Describe nested structs in netlink raw docs 
Add a description and example of nested struct definitions
to the netlink raw documentation.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-12-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-01-31 21:19:19 -08:00
Donald Hunter
78d2341697 doc/netlink: Describe sub-message selector resolution 
Update the netlink-raw docs to add a description of sub-message selector
resolution to explain that selector resolution is constrained by the
spec.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240129223458.52046-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2024-01-31 21:19:18 -08:00
Leo Yan
413971526a Documentation: userspace-api: Document perf ring buffer mechanism 
In the Linux perf tool, the ring buffer serves not only as a medium for
transferring PMU event data but also as a vital mechanism for hardware
tracing using technologies like Intel PT and Arm CoreSight, etc.

Consequently, the ring buffer mechanism plays a crucial role by ensuring
high throughput for data transfer between the kernel and user space
while avoiding excessive overhead caused by the ring buffer itself.

This commit documents the ring buffer mechanism in detail.  It explains
the implementation of both the regular ring buffer and the AUX ring
buffer.  Additionally, it covers how these ring buffers support various
tracing modes and explains the synchronization with memory barriers.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240102085001.228815-1-leo.yan@linaro.org
 2024-01-30 13:49:02 -07:00
Jonathan Corbet
8722435d32 docs: rework the userspace-api top page 
Add some subsection headings and reorder entries so that the page makes a
bit more sense.  With luck, adding some ordering will also reduce merge
conflicts due to everybody adding new entries at the end.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/87ttn5m2q1.fsf@meer.lwn.net
 2024-01-30 13:47:56 -07:00
Kent Gibson
42969726a1 Documentation: gpio: describe uAPI behaviour for unsupported config 
The existing uAPI documentation does not adequately describe how the kernel
handles the case where the underlying hardware or driver does not support
the requested configuration.

Add a Configuration Support section describing that behaviour to both the
v1 and v2 documentation, and better document the errors returned where the
requested configuration cannot be supported.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-01-25 09:42:25 +01:00
Kent Gibson
16b2bb7fe5 Documentation: gpio: add chardev v1 userspace API documentation 
Add documentation for v1 of the GPIO character device userspace API
to the obsolete section of both the admin-guide and userspace-api
books.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-01-22 10:49:07 +01:00
Kent Gibson
e10b641753 Documentation: gpio: update sysfs documentation to reference new chardev doc 
Update GPIO sysfs interface documentation to reference the new
chardev document rather than gpio.h.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-01-22 10:49:07 +01:00
Kent Gibson
5054626a9b Documentation: gpio: move sysfs into an obsolete section 
The GPIO sysfs API is long obsolete, so highlight this even further
by moving it into an obsolete APIs section in both the admin-guide
and userspace-api books.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-01-22 10:49:06 +01:00
Kent Gibson
32a0a0da53 Documentation: gpio: add chardev userspace API documentation 
Add documentation for the GPIO character device userspace API.

Added to the userspace-api book, but also provide a link from the
admin-guide book, as historically the GPIO documentation has been
there.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2024-01-22 10:47:14 +01:00
Linus Torvalds
d97a78423c fbdev fixes and cleanups for 6.8-rc1: 
- Remove intelfb fbdev driver (Thomas Zimmermann)
 - Remove amba-clcd fbdev driver (Linus Walleij)
 - Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
 - fb_deferred_io flushing fixes (Nam Cao)
 - imxfb code fixes and cleanups (Dario Binacchi)
 - stifb primary screen detection cleanups (Thomas Zimmermann)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZaEregAKCRD3ErUQojoP
 X0c9AP0ZdpE1zWFdjYg7ucKhNGrMfXWS8auvkC0qdd9Q0psnmQD/Z22JIl/fpgrk
 0T74KAEd7MwMXGIUm5VKMe/AZJtaBgs=
 =/sky
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev

Pull fbdev updates from Helge Deller:
 "Three fbdev drivers (~8500 lines of code) removed. The Carillo Ranch
  fbdev driver is for an Intel product which was never shipped, and for
  the intelfb and the amba-clcd drivers the drm drivers can be used
  instead.

  The other code changes are minor: some fb_deferred_io flushing fixes,
  imxfb margin fixes and stifb cleanups.

  Summary:
   - Remove intelfb fbdev driver (Thomas Zimmermann)
   - Remove amba-clcd fbdev driver (Linus Walleij)
   - Remove vmlfb Carillo Ranch fbdev driver (Matthew Wilcox)
   - fb_deferred_io flushing fixes (Nam Cao)
   - imxfb code fixes and cleanups (Dario Binacchi)
   - stifb primary screen detection cleanups (Thomas Zimmermann)"

* tag 'fbdev-for-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: (28 commits)
  fbdev/intelfb: Remove driver
  fbdev/hyperv_fb: Do not clear global screen_info
  firmware/sysfb: Clear screen_info state after consuming it
  fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers
  drm/hyperv: Remove firmware framebuffers with aperture helper
  fbdev/sis: Remove dependency on screen_info
  video/logo: use %u format specifier for unsigned int values
  video/sticore: Remove info field from STI struct
  arch/parisc: Detect primary video device from device instance
  fbdev/stifb: Allocate fb_info instance with framebuffer_alloc()
  video/sticore: Store ROM device in STI struct
  fbdev: flush deferred IO before closing
  fbdev: flush deferred work in fb_deferred_io_fsync()
  fbdev: amba-clcd: Delete the old CLCD driver
  fbdev: Remove support for Carillo Ranch driver
  fbdev: hgafb: fix kernel-doc comments
  fbdev: mmp: Fix typo and wording in code comment
  fbdev: fsl-diu-fb: Fix sparse warning due to virt_to_phys() prototype change
  fbdev: imxfb: add '*/' on a separate line in block comment
  fbdev: imxfb: use __func__ for function name
  ...
 2024-01-12 14:38:08 -08:00
Linus Torvalds
61da593f44 media updates for v6.8-rc1 
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+QmuaPwR3wnBdVwACF8+vY7k4RUFAmWhMN0ACgkQCF8+vY7k
 4RUNmw/9FNwS6woEDPUgoaqBqES5N1R/QzqqWgALQSiywUSWsAnHuALR7Aio4oH4
 IMRrXn3nQpg1wj+f2OtVcXreuf1OMdD0WmQvcj/hcjGIx3mZUh2dBXJpR/iRrCRA
 jbGUDZqsiT9gPf6IcqspFccoShVjQDM7NKLa6xQMpwyITBAXhY0d5LPOs70VJO3f
 EH6wdJbhbQoocylSFCOl61un4Ebk/Zou2TDyzAAnIMQxmanVTWnRE9QL6G59t8PA
 XgTcSRiyQGdNScR8c/xgyHDj4KchvkwFHQfOAH+HPot6CIy+UsC02ofcBralTuN6
 HTiJ8upj9U/N2ArX7L9w4xOFaRlXSO4MBTbQsroCgl7vkSfjMx/Ik5gHNVSoP25y
 MdLVg9ReW6D22tWnHvqpwbv4YPjT1uFX9LzuNtINwjJVC5Hn7EMPiE7hdsBGdKZE
 98dVJKNMUHQT5KfEUqjDkdrcAYm5Pd46trEa1aMDnoxtshxlmwHYwUj0QNKVX2gT
 Wa5lw9twFvmvYPGFwIT11HrkFukj4zR7N7Eh0IOK93zjJl6gtr1UNmujj8KFXJS3
 ZB4yTlcSgFunsmkyfcZ+02bgM9fq7SC1/rL9bXBYxdo2EcuduJ93Gr5riaQtVu44
 6t6Gi8Ucf9Uh7B68Alf0GQAd+AhXPzbqtisHdYJb0ijGjRMhq7w=
 =KPPn
 -----END PGP SIGNATURE-----

Merge tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - v4l core: subdev frame interval now supports which field

 - v4l kapi: moves and renames the init_cfg pad op to init_state as an
   internal op.

 - new sensor drivers: gc0308, gc2145, Avnet Alvium, ov64a40, tw9900

 - new camera driver: STM32 DCMIPP

 - s5p-mfc has gained MFC v12 support

 - new ISP driver added to staging: Starfive

 - new stateful encoder/decoded: Wave5 codec It is found on the J721S2
   SoC, JH7100 SoC, ssd202d SoC. Etc.

 - fwnode gained support for MIPI "DisCo for Imaging"
   (https://www.mipi.org/specifications/mipi-disco-imaging)

 - as usual, lots of cleanups, fixups and driver improvements.

* tag 'media/v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (309 commits)
  media: i2c: thp7312: select CONFIG_FW_LOADER
  media: i2c: mt9m114: use fsleep() in place of udelay()
  media: videobuf2: core: Rename min_buffers_needed field in vb2_queue
  media: i2c: thp7312: Store frame interval in subdev state
  media: docs: uAPI: Fix documentation of 'which' field for routing ioctls
  media: docs: uAPI: Expand error documentation for invalid 'which' value
  media: docs: uAPI: Clarify error documentation for invalid 'which' value
  media: v4l2-subdev: Store frame interval in subdev state
  media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval
  media: v4l2-subdev: Turn .[gs]_frame_interval into pad operations
  media: v4l: subdev: Move out subdev state lock macros outside CONFIG_MEDIA_CONTROLLER
  media: s5p-mfc: DPB Count Independent of VIDIOC_REQBUF
  media: s5p-mfc: Load firmware for each run in MFCv12.
  media: s5p-mfc: Set context for valid case before calling try_run
  media: s5p-mfc: Add support for DMABUF for encoder
  media: s5p-mfc: Add support for UHD encoding.
  media: s5p-mfc: Add support for rate controls in MFCv12
  media: s5p-mfc: Add YV12 and I420 multiplanar format support
  media: s5p-mfc: Add initial support for MFCv12
  media: s5p-mfc: Rename IS_MFCV10 macro
  ...
 2024-01-12 14:29:48 -08:00
Thomas Zimmermann
689237ab37 fbdev/intelfb: Remove driver 
From looking at the PCI IDs, every device supported by intelfb is
also supported by i915. Anyone still using intelfb should please
move on to i915, which does everything intelfb does but better.

Removing intelfb is motivated by the driver's excessive use of the
global screen_info state. The state belongs to architecture and
firmware code; device drivers should not attempt to access it. But
fixing intelfb would require a significant change in the driver's
probing logic. As intelfb has been obsolete for nearly 2 decades,
it is probably not worth the effort. Let's just remove it. Also
remove the related documentation.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maik Broemme <mbroemme@libmpq.org>
Signed-off-by: Helge Deller <deller@gmx.de>
 2024-01-12 12:38:37 +01:00
Linus Torvalds
5b9b41617b Another moderately busy cycle for documentation, including: 
- The minimum Sphinx requirement has been raised to 2.4.4, following a
   warning that was added in 6.2.
 
 - Some reworking of the Documentation/process front page to, hopefully,
   make it more useful.
 
 - Various kernel-doc tweaks to, for example, make it deal properly with
   __counted_by annotations.
 
 - We have also restored a warning for documentation of nonexistent
   structure members that disappeared a while back.  That had the delightful
   consequence of adding some 600 warnings to the docs build.  A sustained
   effort by Randy, Vegard, and myself has addressed almost all of those,
   bringing the documentation back into sync with the code.  The fixes are
   going through the appropriate maintainer trees.
 
 - Various improvements to the HTML rendered docs, including automatic links
   to Git revisions and a nice new pulldown to make translations easy to
   access.
 
 - Speaking of translations, more of those for Spanish and Chinese.
 
 ...plus the usual stream of documentation updates and typo fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmWcRKMPHGNvcmJldEBs
 d24ubmV0AAoJEBdDWhNsDH5YTKIH/AxBt/3iWt40dPf18arZHLU6tdUbmg01ttef
 CNKWkniCmABGKc//KYDXvjZMRDt0YlrS0KgUzrb8nIQTBlZG40D+88EwjXE0HeGP
 xt1Fk7OPOiJEqBZ3HEe0PDVfOiA+4yR6CmDKklCJuKg77X9atklneBwPUw/cOASk
 CWj+BdbwPBiSNQv48Lp87rGusKwnH/g0MN2uS0z9MPr1DYjM1K8+ngZjGW24lZHt
 qs5yhP43mlZGBF/lwNJXQp/xhnKAqJ9XwylBX9Wmaoxaz9yyzNVsADGvROMudgzi
 9YB+Jdy7Z0JSrVoLIRhUuDOv7aW8vk+8qLmGJt2aTIsqehbQ6pk=
 =fCtT
 -----END PGP SIGNATURE-----

Merge tag 'docs-6.8' of git://git.lwn.net/linux

Pull documentation update from Jonathan Corbet:
 "Another moderately busy cycle for documentation, including:

   - The minimum Sphinx requirement has been raised to 2.4.4, following
     a warning that was added in 6.2

   - Some reworking of the Documentation/process front page to,
     hopefully, make it more useful

   - Various kernel-doc tweaks to, for example, make it deal properly
     with __counted_by annotations

   - We have also restored a warning for documentation of nonexistent
     structure members that disappeared a while back. That had the
     delightful consequence of adding some 600 warnings to the docs
     build. A sustained effort by Randy, Vegard, and myself has
     addressed almost all of those, bringing the documentation back into
     sync with the code. The fixes are going through the appropriate
     maintainer trees

   - Various improvements to the HTML rendered docs, including automatic
     links to Git revisions and a nice new pulldown to make translations
     easy to access

   - Speaking of translations, more of those for Spanish and Chinese

  ... plus the usual stream of documentation updates and typo fixes"

* tag 'docs-6.8' of git://git.lwn.net/linux: (57 commits)
  MAINTAINERS: use tabs for indent of CONFIDENTIAL COMPUTING THREAT MODEL
  A reworked process/index.rst
  ring-buffer/Documentation: Add documentation on buffer_percent file
  Translated the RISC-V architecture boot documentation.
  Docs: remove mentions of fdformat from util-linux
  Docs/zh_CN: Fix the meaning of DEBUG to pr_debug()
  Documentation: move driver-api/dcdbas to userspace-api/
  Documentation: move driver-api/isapnp to userspace-api/
  Documentation/core-api : fix typo in workqueue
  Documentation/trace: Fixed typos in the ftrace FLAGS section
  kernel-doc: handle a void function without producing a warning
  scripts/get_abi.pl: ignore some temp files
  docs: kernel_abi.py: fix command injection
  scripts/get_abi: fix source path leak
  CREDITS, MAINTAINERS, docs/process/howto: Update man-pages' maintainer
  docs: translations: add translations links when they exist
  kernel-doc: Align quick help and the code
  MAINTAINERS: add reviewer for Spanish translations
  docs: ignore __counted_by attribute in structure definitions
  scripts: kernel-doc: Clarify missing struct member description
  ..
 2024-01-11 19:46:52 -08:00
Linus Torvalds
3e7aeb78ab Networking changes for 6.8. 
Core & protocols
 ----------------
 
  - Analyze and reorganize core networking structs (socks, netdev,
    netns, mibs) to optimize cacheline consumption and set up
    build time warnings to safeguard against future header changes.
    This improves TCP performances with many concurrent connections
    up to 40%.
 
  - Add page-pool netlink-based introspection, exposing the
    memory usage and recycling stats. This helps indentify
    bad PP users and possible leaks.
 
  - Refine TCP/DCCP source port selection to no longer favor even
    source port at connect() time when IP_LOCAL_PORT_RANGE is set.
    This lowers the time taken by connect() for hosts having
    many active connections to the same destination.
 
  - Refactor the TCP bind conflict code, shrinking related socket
    structs.
 
  - Refactor TCP SYN-Cookie handling, as a preparation step to
    allow arbitrary SYN-Cookie processing via eBPF.
 
  - Tune optmem_max for 0-copy usage, increasing the default value
    to 128KB and namespecifying it.
 
  - Allow coalescing for cloned skbs coming from page pools, improving
    RX performances with some common configurations.
 
  - Reduce extension header parsing overhead at GRO time.
 
  - Add bridge MDB bulk deletion support, allowing user-space to
    request the deletion of matching entries.
 
  - Reorder nftables struct members, to keep data accessed by the
    datapath first.
 
  - Introduce TC block ports tracking and use. This allows supporting
    multicast-like behavior at the TC layer.
 
  - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
    classifiers (RSVP and tcindex).
 
  - More data-race annotations.
 
  - Extend the diag interface to dump TCP bound-only sockets.
 
  - Conditional notification of events for TC qdisc class and actions.
 
  - Support for WPAN dynamic associations with nearby devices, to form
    a sub-network using a specific PAN ID.
 
  - Implement SMCv2.1 virtual ISM device support.
 
  - Add support for Batman-avd mulicast packet type.
 
 BPF
 ---
 
  - Tons of verifier improvements:
    - BPF register bounds logic and range support along with a large
      test suite
    - log improvements
    - complete precision tracking support for register spills
    - track aligned STACK_ZERO cases as imprecise spilled registers. It
      improves the verifier "instructions processed" metric from single
      digit to 50-60% for some programs
    - support for user's global BPF subprogram arguments with few
      commonly requested annotations for a better developer experience
    - support tracking of BPF_JNE which helps cases when the compiler
      transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
      like
    - several fixes
 
  - Add initial TX metadata implementation for AF_XDP with support in
    mlx5 and stmmac drivers. Two types of offloads are supported right
    now, that is, TX timestamp and TX checksum offload.
 
  - Fix kCFI bugs in BPF all forms of indirect calls from BPF into
    kernel and from kernel into BPF work with CFI enabled. This allows
    BPF to work with CONFIG_FINEIBT=y.
 
  - Change BPF verifier logic to validate global subprograms lazily
    instead of unconditionally before the main program, so they can be
    guarded using BPF CO-RE techniques.
 
  - Support uid/gid options when mounting bpffs.
 
  - Add a new kfunc which acquires the associated cgroup of a task
    within a specific cgroup v1 hierarchy where the latter is identified
    by its id.
 
  - Extend verifier to allow bpf_refcount_acquire() of a map value field
    obtained via direct load which is a use-case needed in sched_ext.
 
  - Add BPF link_info support for uprobe multi link along with bpftool
    integration for the latter.
 
  - Support for VLAN tag in XDP hints.
 
  - Remove deprecated bpfilter kernel leftovers given the project
    is developed in user-space (https://github.com/facebook/bpfilter).
 
 Misc
 ----
 
  - Support for parellel TC self-tests execution.
 
  - Increase MPTCP self-tests coverage.
 
  - Updated the bridge documentation, including several so-far
    undocumented features.
 
  - Convert all the net self-tests to run in unique netns, to
    avoid random failures due to conflict and allow concurrent
    runs.
 
  - Add TCP-AO self-tests.
 
  - Add kunit tests for both cfg80211 and mac80211.
 
  - Autogenerate Netlink families documentation from YAML spec.
 
  - Add yml-gen support for fixed headers and recursive nests, the
    tool can now generate user-space code for all genetlink families
    for which we have specs.
 
  - A bunch of additional module descriptions fixes.
 
  - Catch incorrect freeing of pages belonging to a page pool.
 
 Driver API
 ----------
 
  - Rust abstractions for network PHY drivers; do not cover yet the
    full C API, but already allow implementing functional PHY drivers
    in rust.
 
  - Introduce queue and NAPI support in the netdev Netlink interface,
    allowing complete access to the device <> NAPIs <> queues
    relationship.
 
  - Introduce notifications filtering for devlink to allow control
    application scale to thousands of instances.
 
  - Improve PHY validation, requesting rate matching information for
    each ethtool link mode supported by both the PHY and host.
 
  - Add support for ethtool symmetric-xor RSS hash.
 
  - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
    platform.
 
  - Expose pin fractional frequency offset value over new DPLL generic
    netlink attribute.
 
  - Convert older drivers to platform remove callback returning void.
 
  - Add support for PHY package MMD read/write.
 
 New hardware / drivers
 ----------------------
 
  - Ethernet:
    - Octeon CN10K devices
    - Broadcom 5760X P7
    - Qualcomm SM8550 SoC
    - Texas Instrument DP83TG720S PHY
 
  - Bluetooth:
    - IMC Networks Bluetooth radio
 
 Removed
 -------
 
  - WiFi:
    - libertas 16-bit PCMCIA support
    - Atmel at76c50x drivers
    - HostAP ISA/PCMCIA style 802.11b driver
    - zd1201 802.11b USB dongles
    - Orinoco ISA/PCMCIA 802.11b driver
    - Aviator/Raytheon driver
    - Planet WL3501 driver
    - RNDIS USB 802.11b driver
 
 Drivers
 -------
 
  - Ethernet high-speed NICs:
    - Intel (100G, ice, idpf):
      - allow one by one port representors creation and removal
      - add temperature and clock information reporting
      - add get/set for ethtool's header split ringparam
      - add again FW logging
      - adds support switchdev hardware packet mirroring
      - iavf: implement symmetric-xor RSS hash
      - igc: add support for concurrent physical and free-running timers
      - i40e: increase the allowable descriptors
    - nVidia/Mellanox:
      - Preparation for Socket-Direct multi-dev netdev. That will allow
        in future releases combining multiple PFs devices attached to
        different NUMA nodes under the same netdev
    - Broadcom (bnxt):
      - TX completion handling improvements
      - add basic ntuple filter support
      - reduce MSIX vectors usage for MQPRIO offload
      - add VXLAN support, USO offload and TX coalesce completion for P7
    - Marvell Octeon EP:
      - xmit-more support
      - add PF-VF mailbox support and use it for FW notifications for VFs
    - Wangxun (ngbe/txgbe):
      - implement ethtool functions to operate pause param, ring param,
        coalesce channel number and msglevel
    - Netronome/Corigine (nfp):
      - add flow-steering support
      - support UDP segmentation offload
 
  - Ethernet NICs embedded, slower, virtual:
    - Xilinx AXI: remove duplicate DMA code adopting the dma engine driver
    - stmmac: add support for HW-accelerated VLAN stripping
    - TI AM654x sw: add mqprio, frame preemption & coalescing
    - gve: add support for non-4k page sizes.
    - virtio-net: support dynamic coalescing moderation
 
  - nVidia/Mellanox Ethernet datacenter switches:
    - allow firmware upgrade without a reboot
    - more flexible support for bridge flooding via the compressed
      FID flooding mode
 
  - Ethernet embedded switches:
    - Microchip:
      - fine-tune flow control and speed configurations in KSZ8xxx
      - KSZ88X3: enable setting rmii reference
    - Renesas:
      - add jumbo frames support
    - Marvell:
      - 88E6xxx: add "eth-mac" and "rmon" stats support
 
  - Ethernet PHYs:
    - aquantia: add firmware load support
    - at803x: refactor the driver to simplify adding support for more
      chip variants
    - NXP C45 TJA11xx: Add MACsec offload support
 
  - Wifi:
    - MediaTek (mt76):
      - NVMEM EEPROM improvements
      - mt7996 Extremely High Throughput (EHT) improvements
      - mt7996 Wireless Ethernet Dispatcher (WED) support
      - mt7996 36-bit DMA support
    - Qualcomm (ath12k):
      - support for a single MSI vector
      - WCN7850: support AP mode
    - Intel (iwlwifi):
      - new debugfs file fw_dbg_clear
      - allow concurrent P2P operation on DFS channels
 
  - Bluetooth:
    - QCA2066: support HFP offload
    - ISO: more broadcast-related improvements
    - NXP: better recovery in case receiver/transmitter get out of sync
 
 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmWdamsSHHBhYmVuaUBy
 ZWRoYXQuY29tAAoJECkkeY3MjxOkGC4P/2xjLzdw22ckSssuE9ORbGko9SNjnqHk
 PQh1E+26BHiCg5KB8VvzMsL78E79MRNXEattSW+1g7dhCvln3oi+Vd0WkdRkgt35
 98Iv18zLbbwFAJeyKvmLAPAkQkMLtVj19QILBBRrugF+egEZgVSE3JBcTAiKv2ZQ
 HzkabA171Ri6LpCcEEtY5XuaKvimGnGzF8YMFf8rX0wtqd2p5kbY9aMe47WAGxvU
 Vf9548XvH+A5yVH2/4/gujtUOpA/RHuhuCMb+oo0cZ+VCC1x9MGzoXzj6r87OTkf
 k2W1whNzcGoin92f+9Lk1JYMuiGKBH4QVaDdNXJnYFSJWPTE7RvRsPzYTSD4/GzK
 yEZbzSJXpy/2vDQm16NoAxl7evRs8Sorzkw4LQRviZHI/5SAkK2ZQiCK5CO8QSYy
 C1LELcV5kn6Foe24xWnrWLjAGug9oJnYoGPMU5gvPmFJMvUMXqm5rmbBgUWL5Rxw
 q1M6gVzabCyWUy6z2G2vaqW2ZntNVvCkdsLtIX0XZkcTzNoP0MA+TuhyGz4wbiuo
 PeyQp/mbGnDgCYggqKIA0YWrTVxkhFrKN520cbO8qXBQytV9oFbM/0/+C0/r/5WX
 pL1JVzLrh6l5ME7EIQfha8UOF9j8q4ueSwb40P3AR2NaZiDABM0zfUZ6+sx+91WF
 ucqPEcZB5cRE
 =1bW6
 -----END PGP SIGNATURE-----

Merge tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
 "The most interesting thing is probably the networking structs
  reorganization and a significant amount of changes is around
  self-tests.

  Core & protocols:

   - Analyze and reorganize core networking structs (socks, netdev,
     netns, mibs) to optimize cacheline consumption and set up build
     time warnings to safeguard against future header changes

     This improves TCP performances with many concurrent connections up
     to 40%

   - Add page-pool netlink-based introspection, exposing the memory
     usage and recycling stats. This helps indentify bad PP users and
     possible leaks

   - Refine TCP/DCCP source port selection to no longer favor even
     source port at connect() time when IP_LOCAL_PORT_RANGE is set. This
     lowers the time taken by connect() for hosts having many active
     connections to the same destination

   - Refactor the TCP bind conflict code, shrinking related socket
     structs

   - Refactor TCP SYN-Cookie handling, as a preparation step to allow
     arbitrary SYN-Cookie processing via eBPF

   - Tune optmem_max for 0-copy usage, increasing the default value to
     128KB and namespecifying it

   - Allow coalescing for cloned skbs coming from page pools, improving
     RX performances with some common configurations

   - Reduce extension header parsing overhead at GRO time

   - Add bridge MDB bulk deletion support, allowing user-space to
     request the deletion of matching entries

   - Reorder nftables struct members, to keep data accessed by the
     datapath first

   - Introduce TC block ports tracking and use. This allows supporting
     multicast-like behavior at the TC layer

   - Remove UAPI support for retired TC qdiscs (dsmark, CBQ and ATM) and
     classifiers (RSVP and tcindex)

   - More data-race annotations

   - Extend the diag interface to dump TCP bound-only sockets

   - Conditional notification of events for TC qdisc class and actions

   - Support for WPAN dynamic associations with nearby devices, to form
     a sub-network using a specific PAN ID

   - Implement SMCv2.1 virtual ISM device support

   - Add support for Batman-avd mulicast packet type

  BPF:

   - Tons of verifier improvements:
       - BPF register bounds logic and range support along with a large
         test suite
       - log improvements
       - complete precision tracking support for register spills
       - track aligned STACK_ZERO cases as imprecise spilled registers.
         This improves the verifier "instructions processed" metric from
         single digit to 50-60% for some programs
       - support for user's global BPF subprogram arguments with few
         commonly requested annotations for a better developer
         experience
       - support tracking of BPF_JNE which helps cases when the compiler
         transforms (unsigned) "a > 0" into "if a == 0 goto xxx" and the
         like
       - several fixes

   - Add initial TX metadata implementation for AF_XDP with support in
     mlx5 and stmmac drivers. Two types of offloads are supported right
     now, that is, TX timestamp and TX checksum offload

   - Fix kCFI bugs in BPF all forms of indirect calls from BPF into
     kernel and from kernel into BPF work with CFI enabled. This allows
     BPF to work with CONFIG_FINEIBT=y

   - Change BPF verifier logic to validate global subprograms lazily
     instead of unconditionally before the main program, so they can be
     guarded using BPF CO-RE techniques

   - Support uid/gid options when mounting bpffs

   - Add a new kfunc which acquires the associated cgroup of a task
     within a specific cgroup v1 hierarchy where the latter is
     identified by its id

   - Extend verifier to allow bpf_refcount_acquire() of a map value
     field obtained via direct load which is a use-case needed in
     sched_ext

   - Add BPF link_info support for uprobe multi link along with bpftool
     integration for the latter

   - Support for VLAN tag in XDP hints

   - Remove deprecated bpfilter kernel leftovers given the project is
     developed in user-space (https://github.com/facebook/bpfilter)

  Misc:

   - Support for parellel TC self-tests execution

   - Increase MPTCP self-tests coverage

   - Updated the bridge documentation, including several so-far
     undocumented features

   - Convert all the net self-tests to run in unique netns, to avoid
     random failures due to conflict and allow concurrent runs

   - Add TCP-AO self-tests

   - Add kunit tests for both cfg80211 and mac80211

   - Autogenerate Netlink families documentation from YAML spec

   - Add yml-gen support for fixed headers and recursive nests, the tool
     can now generate user-space code for all genetlink families for
     which we have specs

   - A bunch of additional module descriptions fixes

   - Catch incorrect freeing of pages belonging to a page pool

  Driver API:

   - Rust abstractions for network PHY drivers; do not cover yet the
     full C API, but already allow implementing functional PHY drivers
     in rust

   - Introduce queue and NAPI support in the netdev Netlink interface,
     allowing complete access to the device <> NAPIs <> queues
     relationship

   - Introduce notifications filtering for devlink to allow control
     application scale to thousands of instances

   - Improve PHY validation, requesting rate matching information for
     each ethtool link mode supported by both the PHY and host

   - Add support for ethtool symmetric-xor RSS hash

   - ACPI based Wifi band RFI (WBRF) mitigation feature for the AMD
     platform

   - Expose pin fractional frequency offset value over new DPLL generic
     netlink attribute

   - Convert older drivers to platform remove callback returning void

   - Add support for PHY package MMD read/write

  New hardware / drivers:

   - Ethernet:
       - Octeon CN10K devices
       - Broadcom 5760X P7
       - Qualcomm SM8550 SoC
       - Texas Instrument DP83TG720S PHY

   - Bluetooth:
       - IMC Networks Bluetooth radio

  Removed:

   - WiFi:
       - libertas 16-bit PCMCIA support
       - Atmel at76c50x drivers
       - HostAP ISA/PCMCIA style 802.11b driver
       - zd1201 802.11b USB dongles
       - Orinoco ISA/PCMCIA 802.11b driver
       - Aviator/Raytheon driver
       - Planet WL3501 driver
       - RNDIS USB 802.11b driver

  Driver updates:

   - Ethernet high-speed NICs:
       - Intel (100G, ice, idpf):
          - allow one by one port representors creation and removal
          - add temperature and clock information reporting
          - add get/set for ethtool's header split ringparam
          - add again FW logging
          - adds support switchdev hardware packet mirroring
          - iavf: implement symmetric-xor RSS hash
          - igc: add support for concurrent physical and free-running
            timers
          - i40e: increase the allowable descriptors
       - nVidia/Mellanox:
          - Preparation for Socket-Direct multi-dev netdev. That will
            allow in future releases combining multiple PFs devices
            attached to different NUMA nodes under the same netdev
       - Broadcom (bnxt):
          - TX completion handling improvements
          - add basic ntuple filter support
          - reduce MSIX vectors usage for MQPRIO offload
          - add VXLAN support, USO offload and TX coalesce completion
            for P7
       - Marvell Octeon EP:
          - xmit-more support
          - add PF-VF mailbox support and use it for FW notifications
            for VFs
       - Wangxun (ngbe/txgbe):
          - implement ethtool functions to operate pause param, ring
            param, coalesce channel number and msglevel
       - Netronome/Corigine (nfp):
          - add flow-steering support
          - support UDP segmentation offload

   - Ethernet NICs embedded, slower, virtual:
       - Xilinx AXI: remove duplicate DMA code adopting the dma engine
         driver
       - stmmac: add support for HW-accelerated VLAN stripping
       - TI AM654x sw: add mqprio, frame preemption & coalescing
       - gve: add support for non-4k page sizes.
       - virtio-net: support dynamic coalescing moderation

   - nVidia/Mellanox Ethernet datacenter switches:
       - allow firmware upgrade without a reboot
       - more flexible support for bridge flooding via the compressed
         FID flooding mode

   - Ethernet embedded switches:
       - Microchip:
          - fine-tune flow control and speed configurations in KSZ8xxx
          - KSZ88X3: enable setting rmii reference
       - Renesas:
          - add jumbo frames support
       - Marvell:
          - 88E6xxx: add "eth-mac" and "rmon" stats support

   - Ethernet PHYs:
       - aquantia: add firmware load support
       - at803x: refactor the driver to simplify adding support for more
         chip variants
       - NXP C45 TJA11xx: Add MACsec offload support

   - Wifi:
       - MediaTek (mt76):
          - NVMEM EEPROM improvements
          - mt7996 Extremely High Throughput (EHT) improvements
          - mt7996 Wireless Ethernet Dispatcher (WED) support
          - mt7996 36-bit DMA support
       - Qualcomm (ath12k):
          - support for a single MSI vector
          - WCN7850: support AP mode
       - Intel (iwlwifi):
          - new debugfs file fw_dbg_clear
          - allow concurrent P2P operation on DFS channels

   - Bluetooth:
       - QCA2066: support HFP offload
       - ISO: more broadcast-related improvements
       - NXP: better recovery in case receiver/transmitter get out of sync"

* tag 'net-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1714 commits)
  lan78xx: remove redundant statement in lan78xx_get_eee
  lan743x: remove redundant statement in lan743x_ethtool_get_eee
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_rx_flow_steer()
  bnxt_en: Fix RCU locking for ntuple filters in bnxt_srxclsrldel()
  bnxt_en: Remove unneeded variable in bnxt_hwrm_clear_vnic_filter()
  tcp: Revert no longer abort SYN_SENT when receiving some ICMP
  Revert "mlx5 updates 2023-12-20"
  Revert "net: stmmac: Enable Per DMA Channel interrupt"
  ipvlan: Remove usage of the deprecated ida_simple_xx() API
  ipvlan: Fix a typo in a comment
  net/sched: Remove ipt action tests
  net: stmmac: Use interrupt mode INTM=1 for per channel irq
  net: stmmac: Add support for TX/RX channel interrupt
  net: stmmac: Make MSI interrupt routine generic
  dt-bindings: net: snps,dwmac: per channel irq
  net: phy: at803x: make read_status more generic
  net: phy: at803x: add support for cdt cross short test for qca808x
  net: phy: at803x: refactor qca808x cable test get status function
  net: phy: at803x: generalize cdt fault length function
  net: ethernet: cortina: Drop TSO support
  ...
 2024-01-11 10:07:29 -08:00
Linus Torvalds
063a7ce32d lsm/stable-6.8 PR 20240105 
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmWYKUIUHHBhdWxAcGF1
 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNyHw/+IKnqL1MZ5QS+/HtSzi4jCL47N9yZ
 OHLol6XswyEGHH9myKPPGnT5lVA93v98v4ty2mws7EJUSGZQQUntYBPbU9Gi40+B
 XDzYSRocoj96sdlKeOJMgaWo3NBRD9HYSoGPDNWZixy6m+bLPk/Dqhn3FabKf1lo
 2qQSmstvChFRmVNkmgaQnBCAtWVqla4EJEL0EKX6cspHbuzRNTeJdTPn6Q/zOUVL
 O2znOZuEtSVpYS7yg3uJT0hHD8H0GnIciAcDAhyPSBL5Uk5l6gwJiACcdRfLRbgp
 QM5Z4qUFdKljV5XBCzYnfhhrx1df08h1SG84El8UK8HgTTfOZfYmawByJRWNJSQE
 TdCmtyyvEbfb61CKBFVwD7Tzb9/y8WgcY5N3Un8uCQqRzFIO+6cghHri5NrVhifp
 nPFlP4klxLHh3d7ZVekLmCMHbpaacRyJKwLy+f/nwbBEID47jpPkvZFIpbalat+r
 QaKRBNWdTeV+GZ+Yu0uWsI029aQnpcO1kAnGg09fl6b/dsmxeKOVWebir25AzQ++
 a702S8HRmj80X+VnXHU9a64XeGtBH7Nq0vu0lGHQPgwhSx/9P6/qICEPwsIriRjR
 I9OulWt4OBPDtlsonHFgDs+lbnd0Z0GJUwYT8e9pjRDMxijVO9lhAXyglVRmuNR8
 to2ByKP5BO+Vh8Y=
 =Py+n
 -----END PGP SIGNATURE-----

Merge tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm

Pull security module updates from Paul Moore:

 - Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and
   lsm_set_self_attr().

   The first syscall simply lists the LSMs enabled, while the second and
   third get and set the current process' LSM attributes. Yes, these
   syscalls may provide similar functionality to what can be found under
   /proc or /sys, but they were designed to support multiple,
   simultaneaous (stacked) LSMs from the start as opposed to the current
   /proc based solutions which were created at a time when only one LSM
   was allowed to be active at a given time.

   We have spent considerable time discussing ways to extend the
   existing /proc interfaces to support multiple, simultaneaous LSMs and
   even our best ideas have been far too ugly to support as a kernel
   API; after +20 years in the kernel, I felt the LSM layer had
   established itself enough to justify a handful of syscalls.

   Support amongst the individual LSM developers has been nearly
   unanimous, with a single objection coming from Tetsuo (TOMOYO) as he
   is worried that the LSM_ID_XXX token concept will make it more
   difficult for out-of-tree LSMs to survive. Several members of the LSM
   community have demonstrated the ability for out-of-tree LSMs to
   continue to exist by picking high/unused LSM_ID values as well as
   pointing out that many kernel APIs rely on integer identifiers, e.g.
   syscalls (!), but unfortunately Tetsuo's objections remain.

   My personal opinion is that while I have no interest in penalizing
   out-of-tree LSMs, I'm not going to penalize in-tree development to
   support out-of-tree development, and I view this as a necessary step
   forward to support the push for expanded LSM stacking and reduce our
   reliance on /proc and /sys which has occassionally been problematic
   for some container users. Finally, we have included the linux-api
   folks on (all?) recent revisions of the patchset and addressed all of
   their concerns.

 - Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit
   ioctls on 64-bit systems problem.

   This patch includes support for all of the existing LSMs which
   provide ioctl hooks, although it turns out only SELinux actually
   cares about the individual ioctls. It is worth noting that while
   Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this
   patch, they did both indicate they are okay with the changes.

 - Fix a potential memory leak in the CALIPSO code when IPv6 is disabled
   at boot.

   While it's good that we are fixing this, I doubt this is something
   users are seeing in the wild as you need to both disable IPv6 and
   then attempt to configure IPv6 labeled networking via
   NetLabel/CALIPSO; that just doesn't make much sense.

   Normally this would go through netdev, but Jakub asked me to take
   this patch and of all the trees I maintain, the LSM tree seemed like
   the best fit.

 - Update the LSM MAINTAINERS entry with additional information about
   our process docs, patchwork, bug reporting, etc.

   I also noticed that the Lockdown LSM is missing a dedicated
   MAINTAINERS entry so I've added that to the pull request. I've been
   working with one of the major Lockdown authors/contributors to see if
   they are willing to step up and assume a Lockdown maintainer role;
   hopefully that will happen soon, but in the meantime I'll continue to
   look after it.

 - Add a handful of mailmap entries for Serge Hallyn and myself.

* tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits)
  lsm: new security_file_ioctl_compat() hook
  lsm: Add a __counted_by() annotation to lsm_ctx.ctx
  calipso: fix memory leak in netlbl_calipso_add_pass()
  selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test
  MAINTAINERS: add an entry for the lockdown LSM
  MAINTAINERS: update the LSM entry
  mailmap: add entries for Serge Hallyn's dead accounts
  mailmap: update/replace my old email addresses
  lsm: mark the lsm_id variables are marked as static
  lsm: convert security_setselfattr() to use memdup_user()
  lsm: align based on pointer length in lsm_fill_user_ctx()
  lsm: consolidate buffer size handling into lsm_fill_user_ctx()
  lsm: correct error codes in security_getselfattr()
  lsm: cleanup the size counters in security_getselfattr()
  lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation
  lsm: drop LSM_ID_IMA
  LSM: selftests for Linux Security Module syscalls
  SELinux: Add selfattr hooks
  AppArmor: Add selfattr hooks
  Smack: implement setselfattr and getselfattr hooks
  ...
 2024-01-09 12:57:46 -08:00
Vegard Nossum
bb67bf1c4a Documentation: move driver-api/dcdbas to userspace-api/ 
This file documents a sysfs interface that is intended for systems
management software. It does NOT document any kind of kernel driver
API. It is also not meant to be used directly by system administrators
or users.

Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231221124816.2978000-3-vegard.nossum@oracle.com
 2024-01-03 14:17:40 -07:00
Vegard Nossum
77e075579e Documentation: move driver-api/isapnp to userspace-api/ 
driver-api/isapnp documents /proc interfaces for interfacing directly
with ISA Plug & Play devices, not any kind of API for kernel developers,
and should thus also live under userspace-api/.

Also fix a few issues while we're at it.

Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231221124816.2978000-2-vegard.nossum@oracle.com
 2024-01-03 14:17:39 -07:00
Donald Hunter
17ed5c1a9e doc/netlink: Document the sub-message format for netlink-raw 
Document the spec format used by netlink-raw families like rt and tc.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20231215093720.18774-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 2023-12-18 14:39:43 -08:00
Laurent Pinchart
95e802a2bf media: docs: uAPI: Fix documentation of 'which' field for routing ioctls 
The routing ioctls documentation incorrectly describes the 'which'
field, due to a bad copy & paste. Fix it.

Fixes: ea73eda508 ("media: Documentation: Add GS_ROUTING documentation")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2023-12-13 16:52:35 +01:00
Laurent Pinchart
a5113ac875 media: docs: uAPI: Expand error documentation for invalid 'which' value 
Multiple subdev ioctls that take a 'which' field do not document the
error returned when the field has an invalid value. Expand the
documentation to fix this.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2023-12-13 16:52:35 +01:00
Laurent Pinchart
2b455a551f media: docs: uAPI: Clarify error documentation for invalid 'which' value 
Invalid values for the 'which' field of structures passed to multiple
subdev ioctls result in an EINVAL error being returned. The
documentation of the corresponding ioctls indicates this with sentences
such as the following:

    the ``which`` field references a non-existing format

This is confusing. Clarify the documentation.

Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2023-12-13 16:52:35 +01:00
Laurent Pinchart
805d4311a5 media: v4l2-subdev: Add which field to struct v4l2_subdev_frame_interval 
Due to a historical mishap, the v4l2_subdev_frame_interval structure
is the only part of the V4L2 subdev userspace API that doesn't contain a
'which' field. This prevents trying frame intervals using the subdev
'TRY' state mechanism.

Adding a 'which' field is simple as the structure has 8 reserved fields.
This would however break userspace as the field is currently set to 0,
corresponding to V4L2_SUBDEV_FORMAT_TRY, while the corresponding ioctls
currently operate on the 'ACTIVE' state. We thus need to add a new
subdev client cap, V4L2_SUBDEV_CLIENT_CAP_INTERVAL_USES_WHICH, to
indicate that userspace is aware of this new field.

All drivers that implement the subdev .get_frame_interval() and
.set_frame_interval() operations are updated to return -EINVAL when
operating on the TRY state, preserving the current behaviour.

While at it, fix a bad copy&paste in the documentation of the struct
v4l2_subdev_frame_interval_enum 'which' field.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> # for imx-media
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for tegra-video
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
 2023-12-13 16:52:35 +01:00
Nathan Lynch
905b9e4878 powerpc/pseries/papr-sysparm: Expose character device to user space 
Until now the papr_sysparm APIs have been kernel-internal. But user
space needs access to PAPR system parameters too. The only method
available to user space today to get or set system parameters is using
sys_rtas() and /dev/mem to pass RTAS-addressable buffers between user
space and firmware. This is incompatible with lockdown and should be
deprecated.

So provide an alternative ABI to user space in the form of a
/dev/papr-sysparm character device with just two ioctl commands (get
and set). The data payloads involved are small enough to fit in the
ioctl argument buffer, making the code relatively simple.

Exposing the system parameters through sysfs has been considered but
it would be too awkward:

* The kernel currently does not have to contain an exhaustive list of
  defined system parameters. This is a convenient property to maintain
  because we don't have to update the kernel whenever a new parameter
  is added to PAPR. Exporting a named attribute in sysfs for each
  parameter would negate this.

* Some system parameters are text-based and some are not.

* Retrieval of at least one system parameter requires input data,
  which a simple read-oriented interface can't support.

Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-11-e9eafd0c8c6c@linux.ibm.com
 2023-12-13 21:38:21 +11:00
Nathan Lynch
514f6ff436 powerpc/pseries: Add papr-vpd character driver for VPD retrieval 
PowerVM LPARs may retrieve Vital Product Data (VPD) for system
components using the ibm,get-vpd RTAS function.

We can expose this to user space with a /dev/papr-vpd character
device, where the programming model is:

  struct papr_location_code plc = { .str = "", }; /* obtain all VPD */
  int devfd = open("/dev/papr-vpd", O_RDONLY);
  int vpdfd = ioctl(devfd, PAPR_VPD_CREATE_HANDLE, &plc);
  size_t size = lseek(vpdfd, 0, SEEK_END);
  char *buf = malloc(size);
  pread(devfd, buf, size, 0);

When a file descriptor is obtained from ioctl(PAPR_VPD_CREATE_HANDLE),
the file contains the result of a complete ibm,get-vpd sequence. The
file contents are immutable from the POV of user space. To get a new
view of the VPD, the client must create a new handle.

This design choice insulates user space from most of the complexities
that ibm,get-vpd brings:

* ibm,get-vpd must be called more than once to obtain complete
  results.

* Only one ibm,get-vpd call sequence should be in progress at a time;
  interleaved sequences will disrupt each other. Callers must have a
  protocol for serializing their use of the function.

* A call sequence in progress may receive a "VPD changed, try again"
  status, requiring the client to abandon the sequence and start
  over.

The memory required for the VPD buffers seems acceptable, around 20KB
for all VPD on one of my systems. And the value of the
/rtas/ibm,vpd-size DT property (the estimated maximum size of VPD) is
consistently 300KB across various systems I've checked.

I've implemented support for this new ABI in the rtas_get_vpd()
function in librtas, which the vpdupdate command currently uses to
populate its VPD database. I've verified that an unmodified vpdupdate
binary generates an identical database when using a librtas.so that
prefers the new ABI.

Along with the papr-vpd.h header exposed to user space, this
introduces a common papr-miscdev.h uapi header to share a base ioctl
ID with similar drivers to come.

Tested-by: Michal Suchánek <msuchanek@suse.de>
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231212-papr-sys_rtas-vs-lockdown-v6-9-e9eafd0c8c6c@linux.ibm.com
 2023-12-13 21:38:21 +11:00