Whether the MII transmit clock can be stopped is primarily a property
of the PHY (there is a capability bit that should be checked first.)
Whether the MAC is capable of stopping the transmit clock is a separate
issue, but this is already handled by the core DesignWare MAC code.
Therefore, snps,en-tx-lpi-clockgating is technically incorrect, so this
commit deprecates the property in the binding.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tsIUF-005vGd-C5@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2025-03-10
An update from ieee802154 for your *net-next* tree:
Andy Shevchenko reworked the ca8210 driver to use the gpiod API and fixed
a few problems of the driver along the way.
* tag 'ieee802154-for-net-next-2025-03-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan-next:
dt-bindings: ieee802154: ca8210: Update polarity of the reset pin
ieee802154: ca8210: Switch to using gpiod API
ieee802154: ca8210: Get platform data via dev_get_platdata()
ieee802154: ca8210: Use proper setters and getters for bitwise types
====================
Link: https://patch.msgid.link/20250310185752.2683890-1-stefan@datenfreihafen.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add compatible string "fsl,imx94-flexcan" for the i.MX94 chip, which
is backward compatible with i.MX95. Set it to fall back to
"fsl,imx95-flexcan".
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20250307190816.2971810-1-Frank.Li@nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Currently the flexcan driver does only support adding PHYs by using the
"old" regulator bindings. Add support for CAN transceivers as a PHY.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Link: https://patch.msgid.link/20250312-flexcan-add-transceiver-caps-v4-1-29e89ae0225a@liebherr.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The `snps,dwmac.yaml` binding currently sets `maxItems: 3` for the
`interrupts` and `interrupt-names` properties, but vendor bindings
selecting `snps,dwmac.yaml` do not impose these limits.
Define constraints for `interrupts` and `interrupt-names` properties in
various DWMAC vendor bindings to ensure proper validation and consistency.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Link: https://patch.msgid.link/20250309003301.1152228-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All Rockchip GMAC variants typically write to GRF regs to control e.g.
interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3562,
RK3576 and RK3588 use a mix of GRF and peripheral GRF regs.
Prior to the commit b331b8ef86 ("dt-bindings: net: convert
rockchip-dwmac to json-schema") the property rockchip,grf was listed
under "Required properties". During the conversion this was lost and
rockchip,grf has since then incorrectly been treated as optional and
not as required.
Similarly, when rockchip,php-grf was added to the schema in the
commit a2b7783142 ("dt-bindings: net: rockchip-dwmac: add rk3588 gmac
compatible") it also incorrectly has been treated as optional for all
GMAC variants, when it should have been required for RK3588, and later
also for RK3576.
Update this binding to require rockchip,grf and rockchip,php-grf to
properly reflect that GRF (and peripheral GRF for RK3576/RK3588) is
required to control part of GMAC.
This should not introduce any breakage as all Rockchip GMAC nodes have
been added together with a rockchip,grf phandle (and rockchip,php-grf
where required) in their initial commit.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250308213720.2517944-2-jonas@kwiboo.se
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long, and should be merged for 6.14-rc6.
They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ83Szw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykt1wCeMzZF9wk1OSGvUA1rZk86FFPHQd4AniYEv4Ze
/FY8PmjKxqkQhJIKCKS4
=7Jpe
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver fixes from Greg KH:
"Here are a number of misc and char and iio driver fixes that have been
sitting in my tree for way too long. They contain:
- iio driver fixes for reported issues
- regression fix for rtsx_usb card reader
- mei and mhi driver fixes
- small virt driver fixes
- ntsync permissions fix
- other tiny driver fixes for reported problems.
All of these have been in linux-next for quite a while with no
reported issues"
* tag 'char-misc-6.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (30 commits)
Revert "drivers/card_reader/rtsx_usb: Restore interrupt based detection"
ntsync: Check wait count based on byte size.
bus: simple-pm-bus: fix forced runtime PM use
char: misc: deallocate static minor in error path
eeprom: digsy_mtc: Make GPIO lookup table match the device
drivers: virt: acrn: hsm: Use kzalloc to avoid info leak in pmcmd_ioctl
binderfs: fix use-after-free in binder_devices
slimbus: messaging: Free transaction ID in delayed interrupt scenario
vbox: add HAS_IOPORT dependency
cdx: Fix possible UAF error in driver_override_show()
intel_th: pci: Add Panther Lake-P/U support
intel_th: pci: Add Panther Lake-H support
intel_th: pci: Add Arrow Lake support
intel_th: msu: Fix less trivial kernel-doc warnings
intel_th: msu: Fix kernel-doc warnings
MAINTAINERS: change maintainer for FSI
ntsync: Set the permissions to be 0666
bus: mhi: host: pci_generic: Use pci_try_reset_function() to avoid deadlock
mei: vsc: Use "wakeuphostint" when getting the host wakeup GPIO
mei: me: add panther lake P DID
...
The GMAC IP on SG2044 is almost a standard Synopsys DesignWare
MAC (version 5.30a) with some extra clock.
Add necessary compatible string for this device.
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250307011623.440792-2-inochiama@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The code has been updated to follow what datasheet says about
the polarity of the reset pin, which is active-low. Update
the device tree bindings accordingly.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/20250305105656.2133487-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Add a binding for the "Gianfar" ethernet controller, also known as
TSEC/eTSEC.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250228-gianfar-yaml-v2-3-6beeefbd4818@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When this binding was originally written, all known TSEC Ethernet
controllers had a Ten-Bit Interface (TBI). However, some datasheets such
as for the MPC8315E suggest that this is not universally true:
The eTSECs do not support TBI, GMII, and FIFO operating modes, so all
references to these interfaces and features should be ignored for this
device.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://patch.msgid.link/20250228-gianfar-yaml-v2-2-6beeefbd4818@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the information related to the Freescale Gianfar (TSEC) MDIO bus
and the Ten-Bit Interface (TBI) from fsl-tsec-phy.txt to a new binding
file in YAML format, fsl,gianfar-mdio.yaml.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250228-gianfar-yaml-v2-1-6beeefbd4818@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEpeA8sTs3M8SN2hR410qiO8sPaAAFAmfG9tQACgkQ10qiO8sP
aAAE1g/9Fg6vrTY1OX0at1iXL5AMqtfAVUJffHGz8SyWJNzKgP0pLtXUTi1Ta2b4
TmHG0+4fMcwM0nigL0cg/F6vEE5V7qM30b7WMhIKpBejcCklINEIYuB1a6CwfDNF
7QtE/NA9/oKBy2JftYpm+4mdtlKdwBdkpz3MKE8/BpB1HdmG3IS3/z9+t4jkMOv+
hRxZKRlqpW98uimc5JjkjMGyt/e4QyHiUt0Z7Ly3dzm0PajvmRy4Idkl3TFMi4Yp
GgKFTix9/7G4iYFoyK5iNiqfesnzqY6jaI3sxv6h6AG/Yz8EOkBNNnKovPC0lAo/
ZpkhU63XN10SZXxeSDSiz4tWx3uBxpN8PIRvuaEr+KW7caCjMYXAuB5uE+KvREA3
hkM8zB5IkT54bLaHJYG6TGQoWxRnzoEDjURBHkEG9DfJs2ixKxdLfe/Rc1lvLqt4
t5ejc+UQsjICZ31LhrZkNbfmKLtQfFCcBj3ZUHz9RzO1AXmsqudeRcl0j3rDjsqY
AdYKFEKGCKeBlhr+Cng9VqzJa7gCmgVgkXYjGxJgbL0n3u6oV/S08/7Ssbzf7RXY
ulFqxEjaexn/vtUHVwMOTxyDttftOfB3Y1IrNUJj3OXWpuXK247OQN6QHM9XWtVy
xzBOW3g9N0L3EUM4PVmZTGU4SdtuwNxvZbSrToBfnjVu0rESAT4=
=KYXQ
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the airoha,npu property for the NPU node available on
EN7581 SoC. The airoha Network Processor Unit (NPU) is used to
offload network traffic forwarded between Packet Switch Engine
(PSE) ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds the NPU document binding for EN7581 SoC.
The Airoha Network Processor Unit (NPU) provides a configuration interface
to implement wired and wireless hardware flow offloading programming Packet
Processor Engine (PPE) flow table.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add dtschema for the MDIO controller found in the RTL9300 Ethernet
switch. The controller is slightly unusual in that direct MDIO
communication is not possible. We model the MDIO controller with the
MDIO buses as child nodes and the PHYs as children of the buses. The
mapping of switch port number to MDIO bus/addr requires the
ethernet-ports sibling to provide the mapping via the phy-handle
property.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250218195216.1034220-4-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Initially realtek,rtl9301-switch was placed under mfd/ because it had
some non-switch related blocks (specifically i2c and reset) but with a
bit more review it has become apparent that this was wrong and the
binding should live under net/.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Lee Jones <lee@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250218195216.1034220-2-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files, addressing
both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes.
-----BEGIN PGP SIGNATURE-----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=z1+P
-----END PGP SIGNATURE-----
Merge tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
failure and the Qcom raw NAND controller probe failure which are due to
some refactoring, otherwise there has been a series of misc fixes on the
Cadence raw NAND controller driver and especially on the DMA side.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAme4omgACgkQJWrqGEe9
VoS6nQf+MJuHmlOeAInMmoKA6gJ358GIxStkiT88db4NuOtXrWkf9BVcI/LNlHDv
dV1xW0uHbrjnf2teuBk4mD11PbH5lKz738ElBphQWkDbsEq7+l0OiN7ixZ8dF7UK
6qKvP8CLRgz/41elD8Kg0c2x4Tfoxym6G1lrNqt9igkv6/jDgKrP93ScDwmVpS76
DZ3toKGqo2fHuG8sN+qGh1KQIf6DWUUx6E7SJin4cF/dHamYBT60KnVHtftabo60
1HEJcIXc6dIxXWz4Zqcjzogje3ynKhKuFW50qmJJKxE4VzcZIVkS0UpiLNZcJtP4
oulojoBQStASD5ztBP2zq4kGaXo6pQ==
=fjkV
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"The two most important fixes in this list are probably the SST write
failure and the Qcom raw NAND controller probe failure which are due
to some refactoring, otherwise there has been a series of misc fixes
on the Cadence raw NAND controller driver and especially on the DMA
side"
* tag 'mtd/fixes-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: cadence: fix unchecked dereference
mtd: spi-nor: sst: Fix SST write failure
dt-bindings: mtd: cadence: document required clock-names
mtd: rawnand: qcom: fix broken config in qcom_param_page_type_exec
mtd: rawnand: cadence: fix incorrect device in dma_unmap_single
mtd: rawnand: cadence: use dma_map_resource for sdma address
mtd: rawnand: cadence: fix error code in cadence_nand_init()
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAme1voYTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnFOCB/0dTrOBuRiX1Gg6yIkYs3lzrWlmCv98
itowE3y2RfAxlFZXaTSNTCFKrKpyk56C13tcq2okaqCWrBzcDkNeVemsNKJ49OBK
pYdxXsiJtddaVg6qJ2up2f/4btgbD1tEH0vzDm2S4z5YigjDFuAiQslbNi6rFSSt
Lcp4yhPcmQ+L+3nGYP0HmYPIX0K1gWL3jFEFPr4e/XWiCKn9bYOUdYRUV6xVa1Dz
lHkA8rqLJ+Gdwc6P3FgSdrTUafCFfgeFlPNnl1ULiLchHK2ZklPWZjFBb/jhKRJM
/Ef9RgpMXrSb8P6lS25RWptTSFnKrg00VqVWV0Fi9rxELe3OvSdoAUuK
=URof
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.15-20250219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-02-19
this is a pull request of 12 patches for net-next/master.
The first 4 patches are by Krzysztof Kozlowski and simplify the c_can
driver's c_can_plat_probe() function.
Ciprian Marian Costea contributes 3 patches to add S32G2/S32G3 support
to the flexcan driver.
Ruffalo Lavoisier's patch removes a duplicated word from the mcp251xfd
DT bindings documentation.
Oleksij Rempel extends the J1939 documentation.
The next patch is by Oliver Hartkopp and adds access for the Remote
Request Substitution bit in CAN-XL frames.
Henrik Brix Andersen's patch for the gs_usb driver adds support for
the CANnectivity firmware.
The last patch is by Robin van der Gracht and removes a duplicated
setup of RX FIFO in the rockchip_canfd driver.
linux-can-next-for-6.15-20250219
* tag 'linux-can-next-for-6.15-20250219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_chip_fifo_setup(): remove duplicated setup of RX FIFO
can: gs_usb: add VID/PID for the CANnectivity firmware
can: canxl: support Remote Request Substitution bit access
can: j1939: Extend stack documentation with buffer size behavior
dt-binding: can: mcp251xfd: remove duplicate word
can: flexcan: add NXP S32G2/S32G3 SoC support
can: flexcan: Add quirk to handle separate interrupt lines for mailboxes
dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
can: c_can: Use syscon_regmap_lookup_by_phandle_args
can: c_can: Use of_property_present() to test existence of DT property
can: c_can: Simplify handling syscon error path
can: c_can: Drop useless final probe failure message
====================
Link: https://patch.msgid.link/20250219113354.529611-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add S32G2/S32G3 SoCs compatible strings.
A particularity for these SoCs is the presence of separate interrupts for
state change, bus errors, MBs 0-7 and MBs 8-127 respectively.
Increase maxItems of 'interrupts' to 4 for S32G based SoCs and keep the
same restriction for other SoCs.
Also, as part of this commit, move the 'allOf' after the required
properties to make the documentation easier to read.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250113120704.522307-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add property tx-amplitude-100base-tx-percent in the device tree bindings
for configuring the tx amplitude of 100BASE-TX PHYs. Modifying it can be
necessary to compensate losses on the PCB and connector, so the voltages
measured on the RJ45 pins are conforming.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250214-dp83822-tx-swing-v5-1-02ca72620599@liebherr.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The clock-names property is required because the driver requests
the clock by name and not the index.
Update the example to use &clk instead of &nf_clk for the clocks
property to avoid confusion with the clock-names property "nf_clk".
Fixes: 1f05f823a1 (dt-bindings: mtd: cadence: convert cadence-nand-controller.txt to yaml)
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
some board-level fixes for wrong pins, pinctrl and regulators, and
disabling DMA on a board where the DMA+uart causes the dma controller to
hang, as well as improved network stability for the OrangePi R1.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmeuYTMQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgVmzCACPCxqeyPyHkVhldxnFXcP3mt9GFDKRpi9c
xfv94S3S0pvfiv9a86vpWT/JDOJ1rx3KXKEMuHW1CBpTcRsvKhmDbDeVPeEFm+Wv
Mw7FuE3K+Faa/RHZ8C/8nruIBhg9rrESb/rvXfbUfRLyZhLJ0VJMNoUABp/Q7UxV
2QLvjCQt6J0AqAlbGbDXXyZOtwtk2ZEsYH4soW808avRcpoPPsppK2wCxndG1DEY
wk2Q/lnXzKYa+u9UuQkqrDFzCpMmQfYwPZQkyHVN+Wb7DdsPbgkoOG63nWjZ5SBb
tk+yhB0JWS3uySy4V56VM36DK3r4VBsFzbFid5apeGQEzhDzq0qN
=Pah3
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=AKD2
-----END PGP SIGNATURE-----
Merge tag 'v6.14-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into HEAD
Fixes for the IOMMU used together with the PCIe controllers on rk3588,
some board-level fixes for wrong pins, pinctrl and regulators, and
disabling DMA on a board where the DMA+uart causes the dma controller to
hang, as well as improved network stability for the OrangePi R1.
* tag 'v6.14-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
Link: https://lore.kernel.org/r/3004814.3ZeAukHxDK@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The main change here is a revert for a cleanup that was done in the
core, attempting to resolve some confusion about how we handle systems
where we've somehow managed to end up with both platform data and device
tree data for the same device. Unfortunately it turns out there are
actually a few systems that deliberately do this and were broken by the
change so we've just reverted it.
There's also a new Qualcomm device ID.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmeuQOIACgkQJNaLcl1U
h9AL1wf9EfB3NRu2QF1K/hSqXGLUUv6qCmhmi1pXw0eFzQuQG91bVPPMkB3WTTGq
5yPy3KjwABh2tMzUyv4W+D8q80+bwBwqmD3zBOfpFLQ38H9zgTE7Pi9X/uo3lnt/
eWZJx/KZ3RFzlVrH1W40U0t3r/vGxFlu2QxVacfRyG47FPz5DVDLxL8rN7NOzxaC
+h4fHdvSaSJY9YKnbZIjMFkywXf3pgMub91ZHLTWnlAdiMO2nsURBnQ+6BZnxjXz
b/LRHZ8cWby7shz+1qrDKZiMPpTdDKQWq7pKzx9R7PANO/hRim4X0bzPVrKAo0/f
UYL3Ts6TZ8rHBdRFy5/CGgrB5IAp6w==
=Pk60
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"The main change here is a revert for a cleanup that was done in the
core, attempting to resolve some confusion about how we handle systems
where we've somehow managed to end up with both platform data and
device tree data for the same device. Unfortunately it turns out there
are actually a few systems that deliberately do this and were broken
by the change so we've just reverted it.
There's also a new Qualcomm device ID"
* tag 'regulator-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: let dt properties override driver init_data
regulator: qcom_smd: Add l2, l5 sub-node to mp5496 regulator
hid-sensors
- Fix an ABI issue that occurred when we gained multiple proximity sensor
support.
adi,adi-axi-adc
- Fix missing pwm-names inItems entry in dt binding.
adi,ad3552r
- Make sure to clear the reset bit in the status flag so future
resets can be detected.
adi,ad7192
- Fix use of value where it should be bit(value) to select channel.
adi,ad7606
- Fix up reporting of wrong available scales.
adi,admv8818
- Force SDO line to be initialized without relying on it already being
intialized to read back current register value.
atmel,sama5d2
- Fix wrong number of bits reported for readings from sama7g5
avago,apds9306
- Fix wrong scaling of scale values (missing a few zeros).
microchip,pac1921
- Fix resource leak by moving ACPI_FREE() call up a few lines.
tyhx,hx9023s
- Fix a use after free caused by releasing firmware a few lines early.
-----BEGIN PGP SIGNATURE-----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=askj
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.14 cycle
hid-sensors
- Fix an ABI issue that occurred when we gained multiple proximity sensor
support.
adi,adi-axi-adc
- Fix missing pwm-names inItems entry in dt binding.
adi,ad3552r
- Make sure to clear the reset bit in the status flag so future
resets can be detected.
adi,ad7192
- Fix use of value where it should be bit(value) to select channel.
adi,ad7606
- Fix up reporting of wrong available scales.
adi,admv8818
- Force SDO line to be initialized without relying on it already being
intialized to read back current register value.
atmel,sama5d2
- Fix wrong number of bits reported for readings from sama7g5
avago,apds9306
- Fix wrong scaling of scale values (missing a few zeros).
microchip,pac1921
- Fix resource leak by moving ACPI_FREE() call up a few lines.
tyhx,hx9023s
- Fix a use after free caused by releasing firmware a few lines early.
* tag 'iio-fixes-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: filter: admv8818: Force initialization of SDO
iio: adc: ad7606: fix wrong scale available
dt-bindings: iio: dac: adi-axi-adc: fix ad7606 pwm-names
iio: dac: ad3552r: clear reset status flag
iio: adc: ad7192: fix channel select
iio: hid-sensor-prox: Split difference from multiple channels
iio: proximity: Fix use-after-free in hx9023s_send_cfg()
iio: adc: at91-sama5d2_adc: fix sama7g5 realbits value
iio: adc: pac1921: Move ACPI_FREE() to cover all branches
iio: light: apds9306: fix max_scale_nano values
By default, rfkill state is set to unblocked. Sometimes, we want to boot
in blocked state and let the application unblock the rfkill.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250116084702.3473176-1-catalin.popescu@leica-geosystems.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmemULoRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZvFigf/fvP7ri+6cyE50Qvau9lQjmrvojQx6Wg4
Jp5kOfXNzyLrEp+SA49UdIEGKak/Speo99ntWvrGrXWSHvW76DzNq5c+XJqffhm6
s+uOcdHlqBRXzD9PuZ0NT75nlb0gBkqGyV6VUW90dwI/lyGNEAwUrbdUO7B8Kmty
KW2hPQP4Zp5Sjm1ZGMKRmwt0qxZBrGKqCq7RqKYldO7PKOhKGfwhpViZxtceo5/2
NdyCVh6LeGP8Kjwo7cMfprNAcLQ2F5+Q9xtjid69TTrW77E9PVK73IGBb+pPwgAd
AzdkNPMX3TwAm/NyAuMhMWXF9VzVzFIfboNgLiAlT2JSYNU7vMtqng==
=54RU
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.14-rc3
We have only one fix for ath12k and one fix for brcmfmac. Also this
will be my last pull request as I'm stepping down as wireless driver
maintainer.
* tag 'wireless-2025-02-07' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: remove Kalle
MAINTAINERS: wifi: ath: remove Kalle
wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
wifi: ath12k: fix handling of 6 GHz rules
====================
Link: https://patch.msgid.link/20250207182957.23315C4CED1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Device specific schemas should not allow undefined properties which is
what 'additionalProperties: true' allows. Add the missing child nodes
and fix this constraint.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250203213056.13827-1-robh@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I'm stepping down as ath10k, ath11k and ath12k maintainer so remove me from
MAINTAINERS file and Device Tree bindings. Jeff continues as the maintainer.
As my quicinc.com email will not work anymore so add an entry to .mailmap file
to direct the mail to my kernel.org address.
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jeff Johnson <jjohnson@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250203180445.1429640-1-kvalo@kernel.org
This patch provides the DT Schema description of:
- powertip,st7272 320 x 240 LCD display
- powertip,hx8238a 320 x 240 LCD display
Used with the different HW revisions of btt3 devices.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20250109154149.1212631-1-lukma@denx.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document compatible for the QFPROM on SAR2130P platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250109-sar2130p-nvmem-v4-5-633739fe5f11@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Fix make dt_binding_check warning:
DTC [C] Documentation/devicetree/bindings/iio/adc/adi,axi-adc.example.dtb
.../adc/adi,axi-adc.example.dtb: adc@0: pwm-names: ['convst1'] is too short
from schema $id: http://devicetree.org/schemas/iio/adc/adi,ad7606.yaml#
Add "minItems" to pwm-names, it allows to use one single pwm when
connected to both adc conversion inputs.
Fixes: 7c2357b104 ("dt-bindings: iio: adc: ad7606: Add iio backend bindings")
Signed-off-by: Angelo Dureghello <adureghello@baylibre.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250129-wip-bl-ad7606_add_backend_sw_mode-v3-1-c3aec77c0ab7@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fix incorrect format of compatible string (comma instead of hyphen) for
TI's AM62A7 SoC.
s/ti,am62a7,dss/ti,am62a7-dss
Fixes: 7959ceb767 ("dt-bindings: display: ti: Add support for am62a7 dss")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250203155431.2174170-1-devarsht@ti.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- Ensure ordering of memory and device I/O for IPIs on RISCV
The RISCV interrupt controllers use writel_relaxed() for generating an
IPI. That's a device I/O write which is not guaranteed to be ordered
against preceding memory writes. As a consequence a IPI receiving CPU
might not be able to observe the actual IPI data which is required to
handle it. Switch to writel() which contains the necessary memory
barriers to enforce ordering.
- Fix up the fallout of the MSI conversion in the MVEVBU ICU driver.
The conversion failed to handle the change of the data storage and kept
the original code which uses the domain::host_data pointer
unchanged. After the conversion domain::host_data points to the new
msi_domain_info structure and not longer to the MVEBU specific MSI data,
which is now stored in a member of msi_domain_info. This leads to
malfunction of the transalate() callback.
- Only handle the PMC in FIQ mode when it is configured that way.
The original check was incorrect as it did not explicitely check for the
proper conditions, which led to malfunctions of the PMU interrupt.
- Improve Kconfig dependencies for the LAN966x Outband Interrupt
controller to avoid pointless pronmpts.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmegvYoTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoRsWEAC+CdtNpmlI56xnvAMCnmaUMiTHb5Be
AFHb6yxmzUdQ53HOx5YhYuLfJojbn/0/upmE/2O3r9c0ku1GCPoNe8oEKCtf0Rai
H65JVZMB9aEpnoQxO6wPCx5CUJILSNpEoyh9YwYa+xcdHXYsXot1PhS2UUj2OHkB
yPv+Nt1rbJ6EHqV1bdti1yQ/Kig5WoQijEaYWHM4p1ZLlgQq628MXsvc6xYRbdeI
d0Zf5HS3nTNxSXCe7KVs8VQWfgQyT2hrTFwIYb2b758pagM5pjTu6oxo6Wm2gHsL
HHNkk3yZ5CvSzxbboQhPWlwYgtOd5wqAMuxeQGB4/ouZcUkJBvoTqDFC+T+ZCEpX
faUW/vOve7UjSy7XNyqDyRKyLvwHw9xdX+fCdiY46dNqecnsz36IBD6xYkuKF8wK
0Wy075/Zxq5uJ/7Q5cgobCPm7VzdRI5lbU0qBUnNNKlkce7pgKaUlRW0qfXPrnmi
ZbzNZsUJFexFOx4bCvfioaJHDi1jmy+rq+kCoh2i3G8eK9RD2LsUdO4HR4QAWb6w
nkBmNG10jdjO4UUQsA3kN8eyEvMVxpgZ/sP9jSY5W1p0jlWF28OZcTm4LZUqgUaD
dG/jjC98qapEwSof67PLWjB5qXkL5ABDXiiMxYWkG287X4ayWT0lvwzoQ22q+3Ep
Dr4uOTXuZ8j1VA==
=9x00
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Ensure ordering of memory and device I/O for IPIs on RISCV
The RISCV interrupt controllers use writel_relaxed() for generating
an IPI. That's a device I/O write which is not guaranteed to be
ordered against preceding memory writes. As a consequence a IPI
receiving CPU might not be able to observe the actual IPI data which
is required to handle it. Switch to writel() which contains the
necessary memory barriers to enforce ordering.
- Fix up the fallout of the MSI conversion in the MVEVBU ICU driver.
The conversion failed to handle the change of the data storage and
kept the original code which uses the domain::host_data pointer
unchanged. After the conversion domain::host_data points to the new
msi_domain_info structure and not longer to the MVEBU specific MSI
data, which is now stored in a member of msi_domain_info. This leads
to malfunction of the transalate() callback.
- Only handle the PMC in FIQ mode when it is configured that way.
The original check was incorrect as it did not explicitely check for
the proper conditions, which led to malfunctions of the PMU
interrupt.
- Improve Kconfig dependencies for the LAN966x Outband Interrupt
controller to avoid pointless pronmpts.
* tag 'irq-urgent-2025-02-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/apple-aic: Only handle PMC interrupt as FIQ when configured so
irqchip/irq-mvebu-icu: Fix access to msi_data from irq_domain::host_data
irqchip/riscv: Ensure ordering of memory writes and IPI writes
irqchip/lan966x-oic: Make CONFIG_LAN966X_OIC depend on CONFIG_MCHP_LAN966X_PCI
dt-bindings: interrupt-controller: microchip,lan966x-oic: Clarify endpoint use
The QCS8300 video clock controller is a derivative of SA8775P, but
QCS8300 has minor difference. Hence, reuse the SA8775P videocc bindings
for QCS8300 platform.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-5-63e8ac268b02@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The QCS8300 camera clock controller is a derivative of SA8775P, but has
an additional clock and minor differences. Hence, reuse the SA8775P
camera bindings and add additional clock required for QCS8300.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-3-63e8ac268b02@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The QCS8300 GPU clock controller is a derivative of SA8775P, but has few
additional clocks and minor differences. Hence, reuse gpucc bindings of
SA8775P and add additional clocks required for QCS8300.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
Link: https://lore.kernel.org/r/20250109-qcs8300-mm-patches-new-v4-1-63e8ac268b02@quicinc.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
