The build system cannot handle doctests in the kernel crate in files
outside of `rust/kernel/`. Subsequent commits will move files out of
that directory, but will still compile them as part of the kernel crate.
Thus ignore all doctests in the to-be-moved files.
Leave tests disabled until they are separated into their own crate and
they stop causing breakage.
Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Tested-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250308110339.2997091-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Extend the Result documentation by some guidelines and examples how
to handle Result error cases gracefully. And how to not handle them.
While at it fix one missing `Result` link in the existing documentation.
[ Moved links out-of-line for improved readability. Fixed `srctree`
link. Sorted out-of-line links. Added newlines for consistency
with other docs. Applied paragraph break suggestion. Reworded
slightly the docs in a couple places. Added Markdown.
In addition, added `#[allow(clippy::single_match)` for the first
example. It cannot be an `expect` since due to a difference introduced
in Rust 1.85.0 when there are comments in the arms of the `match`.
Reported it upstream, but it was intended:
https://github.com/rust-lang/rust-clippy/issues/14418
Perhaps Clippy will lint about it in the future, but without autofix:
https://github.com/rust-lang/rust-clippy/pull/14420
- Miguel ]
Link: https://lore.kernel.org/rust-for-linux/CANiq72keOdXy0LFKk9SzYWwSjiD710v=hQO4xi+5E4xNALa6cA@mail.gmail.com/
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250122054719.595878-1-dirk.behme@de.bosch.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Toolchain and infrastructure:
- Disallow BTF generation with Rust + LTO.
- Improve rust-analyzer support.
'kernel' crate:
- 'init' module: remove 'Zeroable' implementation for a couple types
that should not have it.
- 'alloc' module: fix macOS failure in host test by satisfying POSIX
alignment requirement.
- Add missing '\n's to 'pr_*!()' calls.
And a couple other minor cleanups.
-----BEGIN PGP SIGNATURE-----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=F4QT
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Disallow BTF generation with Rust + LTO
- Improve rust-analyzer support
'kernel' crate:
- 'init' module: remove 'Zeroable' implementation for a couple types
that should not have it
- 'alloc' module: fix macOS failure in host test by satisfying POSIX
alignment requirement
- Add missing '\n's to 'pr_*!()' calls
And a couple other minor cleanups"
* tag 'rust-fixes-6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
scripts: generate_rust_analyzer: add uapi crate
scripts: generate_rust_analyzer: add missing include_dirs
scripts: generate_rust_analyzer: add missing macros deps
rust: Disallow BTF generation with Rust + LTO
rust: task: fix `SAFETY` comment in `Task::wake_up`
rust: workqueue: add missing newline to pr_info! examples
rust: sync: add missing newline in locked_by log example
rust: init: add missing newline to pr_info! calls
rust: error: add missing newline to pr_warn! calls
rust: docs: add missing newline to printing macro examples
rust: alloc: satisfy POSIX alignment requirement
rust: init: fix `Zeroable` implementation for `Option<NonNull<T>>` and `Option<KBox<T>>`
rust: remove leftover mentions of the `alloc` crate
Allow the use of intrusive `hrtimer` fields in structs that are managed by
an `Arc` by implementing `HrTimerPointer` and `RawTimerCallbck` for `Arc`.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-3-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add a method to get a pointer to the data contained in an `Arc`.
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-2-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Add support for intrusive use of the hrtimer system. For now,
only add support for embedding one timer per Rust struct.
The hrtimer Rust API is based on the intrusive style pattern introduced by
the Rust workqueue API.
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250309-hrtimer-v3-v6-12-rc2-v12-1-73586e2bd5f1@kernel.org
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
When building the kernel on Arch Linux using on x86_64 with tools:
$ rustc --version
rustc 1.84.0 (9fc6b4312 2025-01-07)
$ clang --version
clang version 19.1.7
Target: x86_64-pc-linux-gnu
The following symbols are generated:
$ nm vmlinux | rg ' _R' | rustfilt | rg faux
ffffffff81959ae0 T <kernel::faux::Registration>::new
ffffffff81959b40 T <kernel::faux::Registration as core::ops::drop::Drop>::drop
However, these Rust symbols are wrappers around bindings in the C faux
code. Inlining these functions removes the middle-man wrapper function
After applying this patch, the above function signatures disappear.
Link: https://github.com/Rust-for-Linux/linux/issues/1145
Signed-off-by: Ethan Carter Edwards <ethan@ethancedwards.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/jesg4yu7m6fvzmgg5tlsktrrjm36l4qsranto5mdmnucx4pvf3@nhvt4juw5es3
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The `SAFETY` comment inside the `wake_up` method references
erroneously the `signal_pending` C function instead of the
`wake_up_process` which is actually called.
Fix the comment to reference the correct C function.
Fixes: fe95f58320 ("rust: task: adjust safety comments in Task methods")
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250308-comment-fix-v1-1-4bba709fd36d@posteo.net
[ Slightly reworded. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In the `module!` macro, the `author` field is currently of type `String`.
Since modules can have multiple authors, this limitation prevents
specifying more than one.
Add an `authors` field as `Option<Vec<String>>` to allow creating
modules with multiple authors, and change the documentation and all
current users to use it. Eventually, the single `author` field may
be removed.
[ The `modinfo` key needs to still be `author`; otherwise, tooling
may not work properly, e.g.:
$ modinfo --author samples/rust/rust_print.ko
Rust for Linux Contributors
I have also kept the original `author` field (undocumented), so
that we can drop it more easily in a kernel cycle or two.
- Miguel ]
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/244
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Guilherme Giacomo Simoes <trintaeoitogc@gmail.com>
Link: https://lore.kernel.org/r/20250309175712.845622-2-trintaeoitogc@gmail.com
[ Fixed `modinfo` key. Kept `author` field. Reworded message
accordingly. Updated my email. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This moves the rust_fmt_argument function over to use the new #[export]
macro, which will verify at compile-time that the function signature
matches what is in the header file.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-4-41fbad85a27f@google.com
[ Removed period as requested by Andy. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Rust has two different tools for generating function declarations to
call across the FFI boundary:
* bindgen. Generates Rust declarations from a C header.
* cbindgen. Generates C headers from Rust declarations.
However, we only use bindgen in the kernel. This means that when C code
calls a Rust function by name, its signature must be duplicated in both
Rust code and a C header, and the signature needs to be kept in sync
manually.
Introducing cbindgen as a mandatory dependency to build the kernel would
be a rather complex and large change, so we do not consider that at this
time. Instead, to eliminate this manual checking, introduce a new macro
that verifies at compile time that the two function declarations use the
same signature. The idea is to run the C declaration through bindgen,
and then have rustc verify that the function pointers have the same
type.
The signature must still be written twice, but at least you can no
longer get it wrong. If the signatures don't match, you will get errors
that look like this:
error[E0308]: `if` and `else` have incompatible types
--> <linux>/rust/kernel/print.rs:22:22
|
21 | #[export]
| --------- expected because of this
22 | unsafe extern "C" fn rust_fmt_argument(
| ^^^^^^^^^^^^^^^^^ expected `u8`, found `i8`
|
= note: expected fn item `unsafe extern "C" fn(*mut u8, *mut u8, *mut c_void) -> *mut u8 {bindings::rust_fmt_argument}`
found fn item `unsafe extern "C" fn(*mut i8, *mut i8, *const c_void) -> *mut i8 {print::rust_fmt_argument}`
It is unfortunate that the error message starts out by saying "`if` and
`else` have incompatible types", but I believe the rest of the error
message is reasonably clear and not too confusing.
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-3-41fbad85a27f@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Without this change, the rest of this series will emit the following
error message:
error[E0308]: `if` and `else` have incompatible types
--> <linux>/rust/kernel/print.rs:22:22
|
21 | #[export]
| --------- expected because of this
22 | unsafe extern "C" fn rust_fmt_argument(
| ^^^^^^^^^^^^^^^^^ expected `u8`, found `i8`
|
= note: expected fn item `unsafe extern "C" fn(*mut u8, *mut u8, *mut c_void) -> *mut u8 {bindings::rust_fmt_argument}`
found fn item `unsafe extern "C" fn(*mut i8, *mut i8, *const c_void) -> *mut i8 {print::rust_fmt_argument}`
The error may be different depending on the architecture.
To fix this, change the void pointer argument to use a const pointer,
and change the imports to use crate::ffi instead of core::ffi for
integer types.
Fixes: 787983da77 ("vsprintf: add new `%pA` format specifier")
Reviewed-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250303-export-macro-v3-1-41fbad85a27f@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Analogous to the `module!` macro `module_firmware!` adds additional
firmware path strings to the .modinfo section.
In contrast to `module!`, where path strings need to be string literals,
path strings can be composed with the `firmware::ModInfoBuilder`.
Some drivers require a lot of firmware files (such as nova-core) and
hence benefit from more flexibility composing firmware path strings.
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20250306222336.23482-4-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The `firmware` field of the `module!` only accepts literal strings,
which is due to the fact that it is implemented as a proc macro.
Some drivers require a lot of firmware files (such as nova-core) and
hence benefit from more flexibility composing firmware path strings.
The `firmware::ModInfoBuilder` is a helper component to flexibly compose
firmware path strings for the .modinfo section in const context.
It is meant to be used in combination with `kernel::module_firmware!`.
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250306222336.23482-3-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
I've been using the linked list cursor for a few different things, and I
find it inconvenient to use because all of the functions have signatures
along the lines of `Self -> Option<Self>`. The root cause of these
signatures is that the cursor points *at* an element, rather than
*between* two elements.
Thus, change the cursor API to point between two elements. This is
inspired by the stdlib linked list (well, really by this guy [1]), which
also uses cursors that point between elements.
The `peek_next` method returns a helper that lets you look at and
optionally remove the element, as one common use-case of cursors is to
iterate a list to look for an element, then remove that element.
For many of the methods, this will reduce how many we need since they
now just need a prev/next method, instead of the current state where you
may end up needing all of curr/prev/next. Also, if we decide to add a
function for splitting a list into two lists at the cursor, then a
cursor that points between elements is exactly what makes the most
sense.
Another advantage is that this means you can now have a cursor into an
empty list.
Link: https://rust-unofficial.github.io/too-many-lists/sixth-cursors-intro.html [1]
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250210-cursor-between-v7-2-36f0215181ed@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
To prepare for a new cursor API that has the ability to insert elements
into the list, extract the common code needed for this operation into a
new `insert_inner` method.
Both `push_back` and `push_front` are updated to use the new function.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250210-cursor-between-v7-1-36f0215181ed@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Reintroduce dynamically-allocated LockClassKeys such that they are
automatically (de)registered. Require that all usages of LockClassKeys
ensure that they are Pin'd.
Currently, only `'static` LockClassKeys are supported, so Pin is
redundant. However, it is intended that dynamically-allocated
LockClassKeys will eventually be supported, so using Pin from the outset
will make that change simpler.
Closes: https://github.com/Rust-for-Linux/linux/issues/1102
Suggested-by: Benno Lossin <benno.lossin@proton.me>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Mitchell Levy <levymitchell0@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20250307232717.1759087-12-boqun.feng@gmail.com
To support waiting for a `CondVar` as a freezable process, add a
wait_interruptible_freezable() function.
Binder needs this function in the appropriate places to freeze a process
where some of its threads are blocked on the Binder driver.
[ Boqun: Cleaned up the changelog and documentation. ]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250307232717.1759087-10-boqun.feng@gmail.com
In order to assert a particular `Guard` is associated with a particular
`Lock`, add an accessor to obtain a reference to the underlying `Lock`
of a `Guard`.
Binder needs this assertion to ensure unsafe list operations are done
with the correct lock held.
[Boqun: Capitalize the title and reword the commit log]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250205-guard-get-lock-v2-1-ba32a8c1d5b7@google.com
Link: https://lore.kernel.org/r/20250307232717.1759087-8-boqun.feng@gmail.com
Currently, dynamically allocated LockCLassKeys can be used from the Rust
side without having them registered. This is a soundness issue, so
remove them.
Fixes: 6ea5aa0885 ("rust: sync: introduce `LockClassKey`")
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Mitchell Levy <levymitchell0@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250307232717.1759087-11-boqun.feng@gmail.com
I was helping someone with writing a new Rust abstraction, and we were
using the miscdevice abstraction as an example. While doing this, it
became clear to me that the way I implemented the f_ops vtable is
confusing to new Rust users, and that the approach used by the block
abstractions is less confusing.
Thus, update the miscdevice abstractions to use the same approach as
rust/kernel/block/mq/operations.rs.
Sorry about the large diff. This changes the indentation of a large
amount of code.
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250227-miscdevice-fops-change-v1-1-c9e9b75d67eb@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Pid type alias represents the integer type used for pids in the
kernel. It's the Rust equivalent to pid_t, and there are various methods
on Task that use Pid as the return type.
Binder needs to use Pid as the type for function arguments and struct
fields in many places. Thus, make the type public so that Binder can
access it.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250130-task-pid-pub-v1-1-508808bcfcdc@google.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This function can be called with different function pointers when
different allocator (e.g. Kmalloc, Vmalloc, KVmalloc), however since
this function is not polymorphic, only one instance is generated,
and function pointers are used. Given that this function is called
for any Rust-side allocation/deallocation, performance matters a lot,
so making this function inlineable.
This is discovered when doing helper inlining work, since it's discovered
that even with helpers inlined, rust_helper_ symbols are still present
in final vmlinux binary, and it turns out this function is inhibiting
the inlining, and introducing indirect function calls.
Signed-off-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250105194054.545201-4-gary@garyguo.net
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The documentation examples in rust/kernel/workqueue.rs use pr_info!
calls that lack a trailing newline. To maintain consistency with
kernel logging practices, this patch adds the newline to all
affected examples.
Fixes: 15b286d1fd ("rust: workqueue: add examples")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-5-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The pr_info! example in rust/kernel/sync/locked_by.rs was missing
a newline. This patch appends the missing newline to ensure
that log messages for locked resources display correctly.
Fixes: 7b1f55e3a9 ("rust: sync: introduce `LockedBy`")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-4-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Several pr_info! calls in rust/kernel/init.rs (both in code examples
and macro documentation) were missing a newline, causing logs to
run together. This commit updates these calls to include a trailing
newline, improving readability and consistency with the C side.
Fixes: 6841d45a30 ("rust: init: add `stack_pin_init!` macro")
Fixes: 7f8977a7fe ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Fixes: d0fdc39612 ("rust: init: add `PinnedDrop` trait and macros")
Fixes: 4af84c6a85 ("rust: init: update expanded macro explanation")
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1139
Signed-off-by: Alban Kurti <kurti@invicto.ai>
Link: https://lore.kernel.org/r/20250206-printing_fix-v3-3-a85273b501ae@invicto.ai
[ Replaced Closes with Link since it fixes part of the issue. Added
one more Fixes tag (still same set of stable kernels). - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
ISO C's `aligned_alloc` is partially implementation-defined; on some
systems it inherits stricter requirements from POSIX's `posix_memalign`.
This causes the call added in commit dd09538fb4 ("rust: alloc:
implement `Cmalloc` in module allocator_test") to fail on macOS because
it doesn't meet the requirements of `posix_memalign`.
Adjust the call to meet the POSIX requirement and add a comment. This
fixes failures in `make rusttest` on macOS.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Cc: stable@vger.kernel.org
Fixes: dd09538fb4 ("rust: alloc: implement `Cmalloc` in module allocator_test")
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250213-aligned-alloc-v7-1-d2a2d0be164b@gmail.com
[ Added Cc: stable. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
In commit 392e34b6bc ("kbuild: rust: remove the `alloc` crate and
`GlobalAlloc`") we stopped using the upstream `alloc` crate.
Thus remove a few leftover mentions treewide.
Cc: stable@vger.kernel.org # Also to 6.12.y after the `alloc` backport lands
Fixes: 392e34b6bc ("kbuild: rust: remove the `alloc` crate and `GlobalAlloc`")
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Link: https://lore.kernel.org/r/20250303171030.1081134-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When you build the kernel using the llvm-19.1.4-rust-1.83.0-x86_64
toolchain provided by kernel.org with ARCH=arm64, the following symbols
are generated:
$ nm out-linux/vmlinux | grep ' _R'.*Credential | rustfilt
... T <kernel::cred::Credential>::get_secid
... T <kernel::cred::Credential as
kernel::types::AlwaysRefCounted>::dec_ref
... T <kernel::cred::Credential as
kernel::types::AlwaysRefCounted>::inc_ref
However, these Rust symbols are trivial wrappers around the functions
security_cred_getsecid, get_cred, and put_cred respectively. It doesn't
make sense to go through a trivial wrapper for these functions, so mark
them inline. Also mark other trivial methods inline to prevent similar
cases in the future.
After applying this patch, the above command will produce no output.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
[PM: subject tweak, description line trims]
Signed-off-by: Paul Moore <paul@paul-moore.com>
What happens inside the individual LSMs for a given LSM hook can vary
quite a bit, so it is best to use the terminology "release" instead of
"destroy" or "free".
Suggested-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
[PM: subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
When you build the kernel using the llvm-19.1.4-rust-1.83.0-x86_64
toolchain provided by kernel.org with ARCH=arm64, the following symbols
are generated:
$ nm vmlinux | grep ' _R'.*SecurityCtx | rustfilt
... T <kernel::security::SecurityCtx>::from_secid
... T <kernel::security::SecurityCtx as core::ops::drop::Drop>::drop
However, these Rust symbols are trivial wrappers around the functions
security_secid_to_secctx and security_release_secctx respectively. It
doesn't make sense to go through a trivial wrapper for these functions,
so mark them inline. Also mark other trivial methods inline to prevent
similar cases in the future.
After applying this patch, the above command will produce no output.
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
[PM: trimmed long description lines, subj tweak]
Signed-off-by: Paul Moore <paul@paul-moore.com>
A little late in the review of the faux device interface, we added the
ability to specify a parent device when creating new faux devices - but
this never got ported over to the rust bindings. So, let's add the missing
argument now so we don't have to convert other users later down the line.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250227193522.198344-1-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I think this change got missed during review, we don't need
#[repr(transparent)] since Registration just holds a single NonNull. This
attribute had originally been added by me when I was still figuring out how
the bindings should look like but got committed by mistake. So, just drop
it.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Fiona Behrens <me@Kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250225213112.872264-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Provide safe getters to the system bh work queues. They will be used
to reimplement the Hyper-V VMBus in rust.
Signed-off-by: Hamza Mahfooz <hamzamahfooz@linux.microsoft.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Rename the I/O accessors provided by `Io` to encode the type as
number instead of letter. This is in preparation for Port I/O support
to use a trait for generic accessors.
Add a `c_fn` argument to the accessor generation macro to translate
between rust and C names.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Link: https://rust-for-linux.zulipchat.com/#narrow/channel/288089-General/topic/PIO.20support/near/499460541
Signed-off-by: Fiona Behrens <me@kloenk.dev>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250217-io-generic-rename-v1-1-06d97a9e3179@kloenk.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here is a driver core new api for 6.14-rc3 that is being added to allow
platform devices from stop being abused. It adds a new "faux_device"
structure and bus and api to allow almost a straight or simpler
conversion from platform devices that were not really a platform device.
It also comes with a binding for rust, with an example driver in rust
showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now through
their different development trees, in time for 6.15-rc1. We have a
number that are already reviewed and tested, but adding those
conversions now doesn't seem right. For now, no one is using this, and
it passes all build tests from 0-day and linux-next, so all should be
good.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ7H+sQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yljfwCfdP8AvZeIdx89cqS0djspBSFLw1MAoIpq7Pbi
6BY+VOuDSZNdBKXFLR/x
=2qRL
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
This introduces a module for working with faux devices in rust, along with
adding sample code to show how the API is used. Unlike other types of
devices, we don't provide any hooks for device probe/removal - since these
are optional for the faux API and are unnecessary in rust.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Maíra Canal <mairacanal@riseup.net>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/2025021026-exert-accent-b4c6@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Starting with Rust 1.86.0 (to be released 2025-04-03), Clippy will have
a new lint, `doc_overindented_list_items` [1], which catches cases of
overindented list items.
The lint has been added by Yutaro Ohno, based on feedback from the kernel
[2] on a patch that fixed a similar case -- commit 0c5928dead ("rust:
block: fix formatting in GenDisk doc").
Clippy reports a few cases in the kernel, apart from the one already
fixed in the commit above. One is this one:
error: doc list item overindented
--> rust/kernel/rbtree.rs:1152:5
|
1152 | /// null, it is a pointer to the root of the [`RBTree`].
| ^^^^ help: try using ` ` (2 spaces)
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items
= note: `-D clippy::doc-overindented-list-items` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::doc_overindented_list_items)]`
Thus clean it up.
Cc: Yutaro Ohno <yutaro.ono.418@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: a335e95914 ("rust: rbtree: add `RBTree::entry`")
Link: https://github.com/rust-lang/rust-clippy/pull/13711 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/13601 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Link: https://lore.kernel.org/r/20250206232022.599998-1-ojeda@kernel.org
[ There are a few other cases, so updated message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Starting with Rust 1.86.0 (currently in nightly, to be released on
2025-04-03), the `missing_abi` lint is warn-by-default [1]:
error: extern declarations without an explicit ABI are deprecated
--> rust/doctests_kernel_generated.rs:3158:1
|
3158 | extern {
| ^^^^^^ help: explicitly specify the C ABI: `extern "C"`
|
= note: `-D missing-abi` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(missing_abi)]`
Thus clean it up.
Cc: <stable@vger.kernel.org> # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 7f8977a7fe ("rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`")
Link: https://github.com/rust-lang/rust/pull/132397 [1]
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Link: https://lore.kernel.org/r/20250121200934.222075-1-ojeda@kernel.org
[ Added 6.13.y to Cc: stable tag. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Core
----
- More core refactoring to reduce the RTNL lock contention,
including preparatory work for the per-network namespace RTNL lock,
replacing RTNL lock with a per device-one to protect NAPI-related
net device data and moving synchronize_net() calls outside such
lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge and
more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter
---------
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on
each restart.
Protocols
---------
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets,
to avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel
TLS (for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API
----------
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling
-----------------
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec,
to ease maintenance and future development.
- Add YNL support for decoding the link types used in net
self-tests, allowing a single build to run both net and
drivers/net.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues, affecting
both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station mode
support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=hrsp
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
-----BEGIN PGP SIGNATURE-----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=fgyr
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm updates from Paul Moore:
- Improved handling of LSM "secctx" strings through lsm_context struct
The LSM secctx string interface is from an older time when only one
LSM was supported, migrate over to the lsm_context struct to better
support the different LSMs we now have and make it easier to support
new LSMs in the future.
These changes explain the Rust, VFS, and networking changes in the
diffstat.
- Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are
enabled
Small tweak to be a bit smarter about when we build the LSM's common
audit helpers.
- Check for absurdly large policies from userspace in SafeSetID
SafeSetID policies rules are fairly small, basically just "UID:UID",
it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which
helps quiet a number of syzbot related issues. While work is being
done to address the syzbot issues through other mechanisms, this is a
trivial and relatively safe fix that we can do now.
- Various minor improvements and cleanups
A collection of improvements to the kernel selftests, constification
of some function parameters, removing redundant assignments, and
local variable renames to improve readability.
* tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: initialize local array before use to quiet static analysis
safesetid: check size of policy writes
net: corrections for security_secid_to_secctx returns
lsm: rename variable to avoid shadowing
lsm: constify function parameters
security: remove redundant assignment to return variable
lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set
selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test
binder: initialize lsm_context structure
rust: replace lsm context+len with lsm_context
lsm: secctx provider check on release
lsm: lsm_context in security_dentry_init_security
lsm: use lsm_context in security_inode_getsecctx
lsm: replace context+len with lsm_context
lsm: ensure the correct LSM context releaser
Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a few
cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using only
stable Rust features. In particular, previously we were using the
unstable features 'coerce_unsized', 'dispatch_from_dyn' and 'unsize',
and now we will use the new 'derive_coerce_pointee' one, which is on
track to stabilization. This new feature is a macro that essentially
expands into code that internally uses the unstable features that we
were using before, without having to expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'.
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups.
-----BEGIN PGP SIGNATURE-----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=VLNX
-----END PGP SIGNATURE-----
Merge tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a
few cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using
only stable Rust features. In particular, previously we were using
the unstable features 'coerce_unsized', 'dispatch_from_dyn' and
'unsize', and now we will use the new 'derive_coerce_pointee' one,
which is on track to stabilization. This new feature is a macro
that essentially expands into code that internally uses the
unstable features that we were using before, without having to
expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups"
* tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits)
kbuild: rust: add PROCMACROLDFLAGS
rust: uaccess: generalize userSliceReader to support any Vec
rust: kernel: add improved version of `ForeignOwnable::borrow_mut`
rust: kernel: reorder `ForeignOwnable` items
rust: kernel: change `ForeignOwnable` pointer to mut
rust: arc: split unsafe block, add missing comment
rust: types: avoid `as` casts
rust: arc: use `NonNull::new_unchecked`
rust: use derive(CoercePointee) on rustc >= 1.84.0
rust: alloc: add doctest for `ArrayLayout::new()`
rust: init: update `stack_try_pin_init` examples
rust: error: import `kernel`'s `LayoutError` instead of `core`'s
rust: str: replace unwraps with question mark operators
rust: page: remove unnecessary helper function from doctest
rust: rbtree: remove unwrap in asserts
rust: init: replace unwraps with question mark operators
rust: use host dylib naming convention to support macOS
rust: add `build_error!` to the prelude
rust: kernel: move `build_error` hidden function to prevent mistakes
rust: use the `build_error!` macro, not the hidden function
...
- Lockdep:
- Improve and fix lockdep bitsize limits, clarify the Kconfig
documentation (Carlos Llamas)
- Fix lockdep build warning on Clang related to
chain_hlock_class_idx() inlining (Andy Shevchenko)
- Relax the requirements of PROVE_RAW_LOCK_NESTING arch support
by not tying it to ARCH_SUPPORTS_RT unnecessarily (Waiman Long)
- Rust integration:
- Support lock pointers managed by the C side (Lyude Paul)
- Support guard types (Lyude Paul)
- Update MAINTAINERS file filters to include the
Rust locking code (Boqun Feng)
- Wake-queues:
- Add raw_spin_*wake() helpers to simplify locking code (John Stultz)
- SMP cross-calls:
- Fix potential data update race by evaluating the local cond_func()
before IPI side-effects (Mathieu Desnoyers)
- Guard primitives:
- Ease [c]tags based searches by including the cleanup/guard type
primitives (Peter Zijlstra)
- ww_mutexes:
- Simplify the ww_mutex self-test code via swap() (Thorsten Blum)
- Static calls:
- Update the static calls MAINTAINERS file-pattern (Jiri Slaby)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=yCzP
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Lockdep:
- Improve and fix lockdep bitsize limits, clarify the Kconfig
documentation (Carlos Llamas)
- Fix lockdep build warning on Clang related to
chain_hlock_class_idx() inlining (Andy Shevchenko)
- Relax the requirements of PROVE_RAW_LOCK_NESTING arch support by
not tying it to ARCH_SUPPORTS_RT unnecessarily (Waiman Long)
Rust integration:
- Support lock pointers managed by the C side (Lyude Paul)
- Support guard types (Lyude Paul)
- Update MAINTAINERS file filters to include the Rust locking code
(Boqun Feng)
Wake-queues:
- Add raw_spin_*wake() helpers to simplify locking code (John Stultz)
SMP cross-calls:
- Fix potential data update race by evaluating the local cond_func()
before IPI side-effects (Mathieu Desnoyers)
Guard primitives:
- Ease [c]tags based searches by including the cleanup/guard type
primitives (Peter Zijlstra)
ww_mutexes:
- Simplify the ww_mutex self-test code via swap() (Thorsten Blum)
Static calls:
- Update the static calls MAINTAINERS file-pattern (Jiri Slaby)"
* tag 'locking-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add static_call_inline.c to STATIC BRANCH/CALL
cleanup, tags: Create tags for the cleanup primitives
sched/wake_q: Add helper to call wake_up_q after unlock with preemption disabled
rust: sync: Add lock::Backend::assert_is_held()
rust: sync: Add SpinLockGuard type alias
rust: sync: Add MutexGuard type alias
rust: sync: Make Guard::new() public
rust: sync: Add Lock::from_raw() for Lock<(), B>
locking: MAINTAINERS: Start watching Rust locking primitives
lockdep: Move lockdep_assert_locked() under #ifdef CONFIG_PROVE_LOCKING
lockdep: Mark chain_hlock_class_idx() with __maybe_unused
lockdep: Document MAX_LOCKDEP_CHAIN_HLOCKS calculation
lockdep: Clarify size for LOCKDEP_*_BITS configs
lockdep: Fix upper limit for LOCKDEP_*_BITS configs
locking/ww_mutex/test: Use swap() macro
smp/scf: Evaluate local cond_func() before IPI side-effects
locking/lockdep: Enforce PROVE_RAW_LOCK_NESTING only if ARCH_SUPPORTS_RT
-----BEGIN PGP SIGNATURE-----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=EXYs
-----END PGP SIGNATURE-----
Merge tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
The property_present() method expects a &CString currently and will work
only with heap allocated C strings.
In order to make it work with compile-time string constants too, change
the argument type to &CStr.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/e97dcbe0418cc1053fb4bcfac65cc02a0afcdf78.1737005078.git.viresh.kumar@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UserSliceReader::read_all function is currently restricted to use
only Vec with the kmalloc allocator. However, there is no reason for
this limitation.
This patch generalizes the function to accept any Vec regardless of the
allocator used.
There's a use-case for a KVVec in Binder to avoid maximum sizes for a
certain array.
Link: https://github.com/Rust-for-Linux/linux/issues/1136
Signed-off-by: Filipe Xavier <felipeaggger@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20250107-gen-userslice-readall-alloc-v2-1-d7fe4d19241a@gmail.com
[ Reflowed and slightly reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Previously, the `ForeignOwnable` trait had a method called `borrow_mut`
that was intended to provide mutable access to the inner value. However,
the method accidentally made it possible to change the address of the
object being modified, which usually isn't what we want. (And when we
want that, it can be done by calling `from_foreign` and `into_foreign`,
like how the old `borrow_mut` was implemented.)
In this patch, we introduce an alternate definition of `borrow_mut` that
solves the previous problem. Conceptually, given a pointer type `P` that
implements `ForeignOwnable`, the `borrow_mut` method gives you the same
kind of access as an `&mut P` would, except that it does not let you
change the pointer `P` itself.
This is analogous to how the existing `borrow` method provides the same
kind of access to the inner value as an `&P`.
Note that for types like `Arc`, having an `&mut Arc<T>` only gives you
immutable access to the inner `T`. This is because mutable references
assume exclusive access, but there might be other handles to the same
reference counted value, so the access isn't exclusive. The `Arc` type
implements this by making `borrow_mut` return the same type as `borrow`.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-6-80dbadd00951@gmail.com
[ Updated to `crate::ffi::`. Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`{into,from}_foreign` before `borrow` is slightly more logical.
This removes an inconsistency with `kbox.rs` which already uses this
ordering.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-5-80dbadd00951@gmail.com
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
It is slightly more convenient to operate on mut pointers, and this also
properly conveys the desired ownership semantics of the trait.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-4-80dbadd00951@gmail.com
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The new SAFETY comment style is taken from existing comments in `deref`
and `drop.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-3-80dbadd00951@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Replace `as` casts with `cast{,_mut}` calls which are a bit safer.
In one instance, remove an unnecessary `as` cast without replacement.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-2-80dbadd00951@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
There is no need to check (and panic on violations of) the safety
requirements on `ForeignOwnable` functions. Avoiding the check is
consistent with the implementation of `ForeignOwnable` for `Box`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-1-80dbadd00951@gmail.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `kernel` crate relies on both `coerce_unsized` and `dispatch_from_dyn`
unstable features.
Alice Ryhl has proposed [1] the introduction of the unstable macro
`SmartPointer` to reduce such dependence, along with a RFC patch [2].
Since Rust 1.81.0 this macro, later renamed to `CoercePointee` in
Rust 1.84.0 [3], has been fully implemented with the naming discussion
resolved.
This feature is now on track to stabilization in the language.
In order to do so, we shall start using this macro in the `kernel` crate
to prove the functionality and utility of the macro as the justification
of its stabilization.
This patch makes this switch in such a way that the crate remains
backward compatible with older Rust compiler versions,
via the new Kconfig option `RUSTC_HAS_COERCE_POINTEE`.
A minimal demonstration example is added to the
`samples/rust/rust_print_main.rs` module.
Link: https://rust-lang.github.io/rfcs/3621-derive-smart-pointer.html [1]
Link: https://lore.kernel.org/all/20240823-derive-smart-pointer-v1-1-53769cd37239@google.com/ [2]
Link: https://github.com/rust-lang/rust/pull/131284 [3]
Signed-off-by: Xiangfei Ding <dingxiangfei2009@gmail.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241203205050.679106-2-dingxiangfei2009@gmail.com
[ Fixed version to 1.84. Renamed option to `RUSTC_HAS_COERCE_POINTEE`
to match `CC_HAS_*` ones. Moved up new config option, closer to the
`CC_HAS_*` ones. Simplified Kconfig line. Fixed typos and slightly
reworded example and commit. Added Link to PR. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Add a rustdoc example and Kunit test to the `ArrayLayout` struct's
`ArrayLayout::new()` function.
This patch depends on the first patch in this series in order for the
KUnit test to compile.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1131
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jimmy Ostler <jtostler1@gmail.com>
Link: https://lore.kernel.org/r/f1564da5bcaa6be87aee312767a1d1694a03d1b7.1734674670.git.jtostler1@gmail.com
[ Added periods to example comments. Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Change documentation imports to use `kernel::alloc::AllocError`,
because `KBox::new()` now returns that, instead of the `core`'s
`AllocError`.
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jimmy Ostler <jtostler1@gmail.com>
Link: https://lore.kernel.org/r/ec8badbe94c5e78f22315325a7f2ae96129d6a65.1734674670.git.jtostler1@gmail.com
[ Fixed formatting of imports (still unordered). Slightly reworded
commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Import the internal (`kernel::alloc`) version of `LayoutError` instead
of the `core::alloc` one.
In particular, this results in switching the type in the existing
`From<LayoutError> for Error` implementation.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Jimmy Ostler <jtostler1@gmail.com>
Link: https://lore.kernel.org/r/fe58a02189e8804a9eabdd01cb1927d4c491d79c.1734674670.git.jtostler1@gmail.com
[ Reworded commit. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Remove `unwrap` in asserts and replace it with `Option::Some`
matching. By doing it this way, the examples are more
descriptive, so it disambiguates the return type of
the `get(...)` and `next(...)`, because the `unwrap(...)`
can also be called on `Result`.
Signed-off-by: Daniel Sedlak <daniel@sedlak.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123095033.41240-3-daniel@sedlak.dev
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
We need the debugfs / driver-core fixes in here as well for testing and
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
So far `DevresInner` is kept alive, even if `Devres` is dropped until
the devres callback is executed to avoid a WARN() when the action has
been released already.
With the introduction of devm_remove_action_nowarn() we can remove the
action in `Devres::drop`, handle the case where the action has been
released already and hence also free `DevresInner`.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250107122609.8135-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sibling `build_assert!` is already in the prelude, it makes sense
that a "core"/"language" facility like this is part of the prelude and
users should not be defining their own one (thus there should be no risk
of future name collisions and we would want to be aware of them anyway).
Thus add `build_error!` into the prelude.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123222849.350287-3-ojeda@kernel.org
[ Applied the change to the new miscdevice cases. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Users were using the hidden exported `kernel::build_error` function
instead of the intended `kernel::build_error!` macro, e.g. see the
previous commit.
To force to use the macro, move it into the `build_assert` module,
thus making it a compilation error and avoiding a collision in the same
"namespace". Using the function now would require typing the module name
(which is hidden), not just a single character.
Now attempting to use the function will trigger this error with the
right suggestion by the compiler:
error[E0423]: expected function, found macro `kernel::build_error`
--> samples/rust/rust_minimal.rs:29:9
|
29 | kernel::build_error();
| ^^^^^^^^^^^^^^^^^^^ not a function
|
help: use `!` to invoke the macro
|
29 | kernel::build_error!();
| +
An alternative would be using an alias, but it would be more complex
and moving it into the module seems right since it belongs there and
reduces the amount of code at the crate root.
Keep the `#[doc(hidden)]` inside `build_assert` in case the module is
not hidden in the future.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123222849.350287-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Code and some examples were using the function, rather than the macro. The
macro is what is documented.
Thus move users to the macro.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123222849.350287-1-ojeda@kernel.org
[ Applied the change to the new miscdevice cases. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Running Clippy for `rusttest` code is useful to catch issues there too,
even if the code is not as critical. In the future, this code may also
run in kernelspace and could be copy-pasted. Thus it is useful to keep
it under the same standards. For instance, it will now make us add
`// SAFETY` comments.
It also makes everything more consistent.
Thus clean the few issues spotted by Clippy and start running it.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123180639.260191-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `RegistrationOps` trait holds some obligations to the caller and
implementers. While being documented, the trait and the corresponding
functions haven't been marked as unsafe.
Hence, markt the trait and functions unsafe and add the corresponding
safety comments.
This patch does not include any fuctional changes.
Reported-by: Gary Guo <gary@garyguo.net>
Closes: https://lore.kernel.org/rust-for-linux/20241224195821.3b43302b.gary@garyguo.net/
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250103164655.96590-4-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The module entry of `io` falsely ended up in the "use" block instead of
the "mod" block, hence move it to its correct location.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250103164655.96590-3-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Suppress a corner case spurious flush dependency warning.
- Two trivial changes.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ3hmjA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGUrkAP90cajNtGbtFR1J61N4dTSfjBz8L7oQ6GLLyjCB
MDxvpQD/ViVVpHBl9/jfObk//p6YMBTBD2Zp/aBc3mkKOVhfqws=
=eUNO
-----END PGP SIGNATURE-----
Merge tag 'wq-for-6.13-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Suppress a corner case spurious flush dependency warning
- Two trivial changes
* tag 'wq-for-6.13-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: add printf attribute to __alloc_workqueue()
workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker
rust: add safety comment in workqueue traits
Implement the basic platform bus abstractions required to write a basic
platform driver. This includes the following data structures:
The `platform::Driver` trait represents the interface to the driver and
provides `platform::Driver::probe` for the driver to implement.
The `platform::Device` abstraction represents a `struct platform_device`.
In order to provide the platform bus specific parts to a generic
`driver::Registration` the `driver::RegistrationOps` trait is implemented
by `platform::Adapter`.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-15-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to not duplicate code in bus specific implementations (e.g.
platform), implement a generic `driver::Adapter` to represent the
connection of matched drivers and devices.
Bus specific `Adapter` implementations can simply implement this trait
to inherit generic functionality, such as matching OF or ACPI device IDs
and ID table entries.
Suggested-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-14-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`of::DeviceId` is an abstraction around `struct of_device_id`.
This is used by subsequent patches, in particular the platform bus
abstractions, to create OF device ID tables.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-13-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement `pci::Bar`, `pci::Device::iomap_region` and
`pci::Device::iomap_region_sized` to allow for I/O mappings of PCI BARs.
To ensure that a `pci::Bar`, and hence the I/O memory mapping, can't
out-live the PCI device, the `pci::Bar` type is always embedded into a
`Devres` container, such that the `pci::Bar` is revoked once the device
is unbound and hence the I/O mapped memory is unmapped.
A `pci::Bar` can be requested with (`pci::Device::iomap_region_sized`) or
without (`pci::Device::iomap_region`) a const generic representing the
minimal requested size of the I/O mapped memory region. In case of the
latter only runtime checked I/O reads / writes are possible.
Co-developed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-11-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the basic PCI abstractions required to write a basic PCI
driver. This includes the following data structures:
The `pci::Driver` trait represents the interface to the driver and
provides `pci::Driver::probe` for the driver to implement.
The `pci::Device` abstraction represents a `struct pci_dev` and provides
abstractions for common functions, such as `pci::Device::set_master`.
In order to provide the PCI specific parts to a generic
`driver::Registration` the `driver::RegistrationOps` trait is implemented
by `pci::Adapter`.
`pci::DeviceId` implements PCI device IDs based on the generic
`device_id::RawDevceId` abstraction.
Co-developed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-10-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a Rust abstraction for the kernel's devres (device resource
management) implementation.
The Devres type acts as a container to manage the lifetime and
accessibility of device bound resources. Therefore it registers a
devres callback and revokes access to the resource on invocation.
Users of the Devres abstraction can simply free the corresponding
resources in their Drop implementation, which is invoked when either the
Devres instance goes out of scope or the devres callback leads to the
resource being revoked, which implies a call to drop_in_place().
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-9-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
I/O memory is typically either mapped through direct calls to ioremap()
or subsystem / bus specific ones such as pci_iomap().
Even though subsystem / bus specific functions to map I/O memory are
based on ioremap() / iounmap() it is not desirable to re-implement them
in Rust.
Instead, implement a base type for I/O mapped memory, which generically
provides the corresponding accessors, such as `Io::readb` or
`Io:try_readb`.
`Io` supports an optional const generic, such that a driver can indicate
the minimal expected and required size of the mapping at compile time.
Correspondingly, calls to the 'non-try' accessors, support compile time
checks of the I/O memory offset to read / write, while the 'try'
accessors, provide boundary checks on runtime.
`IoRaw` is meant to be embedded into a structure (e.g. pci::Bar or
io::IoMem) which creates the actual I/O memory mapping and initializes
`IoRaw` accordingly.
To ensure that I/O mapped memory can't out-live the device it may be
bound to, subsystems must embed the corresponding I/O memory type (e.g.
pci::Bar) into a `Devres` container, such that it gets revoked once the
device is unbound.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Daniel Almeida <daniel.almeida@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-8-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revocable allows access to objects to be safely revoked at run time.
This is useful, for example, for resources allocated during device probe;
when the device is removed, the driver should stop accessing the device
resources even if another state is kept in memory due to existing
references (i.e., device context data is ref-counted and has a non-zero
refcount after removal of the device).
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20241219170425.12036-7-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Analogous to `Opaque::new` add `Opaque::pin_init`, which instead of a
value `T` takes a `PinInit<T>` and returns a `PinInit<Opaque<T>>`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Suggested-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-6-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most subsystems use some kind of ID to match devices and drivers. Hence,
we have to provide Rust drivers an abstraction to register an ID table
for the driver to match.
Generally, those IDs are subsystem specific and hence need to be
implemented by the corresponding subsystem. However, the `IdArray`,
`IdTable` and `RawDeviceId` types provide a generalized implementation
that makes the life of subsystems easier to do so.
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Co-developed-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-4-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Implement the generic `Registration` type and the `RegistrationOps`
trait.
The `Registration` structure is the common type that represents a driver
registration and is typically bound to the lifetime of a module. However,
it doesn't implement actual calls to the kernel's driver core to register
drivers itself.
Instead the `RegistrationOps` trait is provided to subsystems, which have
to implement `RegistrationOps::register` and
`RegistrationOps::unregister`. Subsystems have to provide an
implementation for both of those methods where the subsystem specific
variants to register / unregister a driver have to implemented.
For instance, the PCI subsystem would call __pci_register_driver() from
`RegistrationOps::register` and pci_unregister_driver() from
`DrvierOps::unregister`.
Co-developed-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Wedson Almeida Filho <wedsonaf@gmail.com>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-3-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to access static metadata of a Rust kernel module, add the
`ModuleMetadata` trait.
In particular, this trait provides the name of a Rust kernel module as
specified by the `module!` macro.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Fabien Parent <fabien.parent@linaro.org>
Link: https://lore.kernel.org/r/20241219170425.12036-2-dakr@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since we've exposed Lock::from_raw() and Guard::new() publically, we
want to be able to make sure that we assert that a lock is actually held
when constructing a Guard for it to handle instances of unsafe
Guard::new() calls outside of our lock module.
Hence add a new method assert_is_held() to Backend, which uses lockdep
to check whether or not a lock has been acquired. When lockdep is
disabled, this has no overhead.
[Boqun: Resolve the conflicts with exposing Guard::new(), reword the
commit log a bit and format "unsafe { <statement>; }" into "unsafe {
<statement> }" for the consistency. ]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241125204139.656801-1-lyude@redhat.com
A simple helper alias for code that needs to deal with Guard types returned
from SpinLocks.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241120222742.2490495-3-lyude@redhat.com
A simple helper alias for code that needs to deal with Guard types returned
from Mutexes.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241120222742.2490495-2-lyude@redhat.com
Since we added a `Lock::from_raw()` function previously, it makes sense
to also introduce an interface for creating a `Guard` from a reference
to a `Lock` for instances where we've derived the `Lock` from a raw
pointer and know that the lock is already acquired, there are such
usages in KMS API.
[Boqun: Add backquotes to type names, reformat the commit log, reword a
bit on the usage of KMS API]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Filipe Xavier <felipe_life@live.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241119231146.2298971-3-lyude@redhat.com
