mirror of
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-09-04 20:19:47 +08:00
master
175 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
260f6f4fda |
drm for 6.17-rc1
non-drm: rust: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings mtd: - driver for Intel GPU non-volatile storage i2c - designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmiJM/0ACgkQDHTzWXnE hr6MpA/+JJKGdSdrE95QkaMcOZh/3e3areGXZ0V/RrrJXdB4/DoAfQSHhF0H7m7y MhBGVLGNMXq7KHrz28p1MjLHrE1mwmvJ6hZ4J076ed4u9naoCD0m6k5w5wiue+KL HyPR54ADxN0BYmgV0l/B0wj42KsHyTO4x4hdqPJu02V9Dtmx6FCh2ujkOF3p9nbK GMwWDttl4KEKljD0IvQ9YIYJ66crYGx/XmZi7JoWRrS104K/h1u8qZuXBp5jVKTy OZRAVyLdmJqdTOLH7l599MBBcEd/bNV37/LVwF4T5iFunEKOAiyN0QY0OR+IeRVh ZfOv2/gp4UNyIfyahQ7LKLgEilNPGHoPitvDJPvBZxW2UjwXVNvA1QfdK5DAlVRS D5NoFRjlFFCz8/c2hQwlKJ9o7eVgH3/pK0mwR7SPGQTuqzLFCrAfCuzUvg/gV++6 JFqmGKMHeCoxO2o4GMrwjFttStP41usxtV/D+grcbPteNO9UyKJS4C38n4eamJXM a9Sy9APuAb6F0w5+yMItEF7TQifgmhIbm5AZHlxE1KoDQV6TdiIf1Gou5LeDGoL6 OACbXHJPL52tUnfCRpbfI4tE/IVyYsfL01JnvZ5cZZWItXfcIz76ykJri+E0G60g yRl/zkimHKO4B0l/HSzal5xROXr+3VzeWehEiz/ot1VriP5OesA= =n9MO -----END PGP SIGNATURE----- Merge tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ... |
||
|
Samuel Zhang
|
2640e81947 |
PM: hibernate: shrink shmem pages after dev_pm_ops.prepare()
When hibernate with data center dGPUs, huge number of VRAM data will be moved to shmem during dev_pm_ops.prepare(). These shmem pages take a lot of system memory so that there's no enough free memory for creating the hibernation image. This will cause hibernation fail and abort. After dev_pm_ops.prepare(), call shrink_all_memory() to force move shmem pages to swap disk and reclaim the pages, so that there's enough system memory for hibernation image and less pages needed to copy to the image. This patch can only flush and free about half shmem pages. It will be better to flush and free more pages, even all of shmem pages, so that there're less pages to be copied to the hibernation image and the overall hibernation time can be reduced. Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20250710062313.3226149-4-guoqing.zhang@amd.com Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> |
||
|
Mario Limonciello
|
12ffc3b151 |
PM: Restrict swap use to later in the suspend sequence
Currently swap is restricted before drivers have had a chance to do their prepare() PM callbacks. Restricting swap this early means that if a driver needs to evict some content from memory into sawp in it's prepare callback, it won't be able to. On AMD dGPUs this can lead to failed suspends under memory pressure situations as all VRAM must be evicted to system memory or swap. Move the swap restriction to right after all devices have had a chance to do the prepare() callback. If there is any problem with the sequence, restore swap in the appropriate dpm resume callbacks or error handling paths. Closes: https://github.com/ROCm/ROCK-Kernel-Driver/issues/174 Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/2362 Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Tested-by: Nat Wittstock <nat@fardog.io> Tested-by: Lucian Langa <lucilanga@7pot.org> Link: https://patch.msgid.link/20250613214413.4127087-1-superm1@kernel.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
c89756bcf4 |
Power management updates for 6.16-rc1
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian).
- Fix typos in energy model documentation and example driver code (Moon
Hee Lee, Atul Kumar Pant).
- Rearrange the energy model management code and add a new function for
adjusting a CPU energy model after adjusting the capacity of the
given CPU to it (Rafael Wysocki).
- Refactor cpufreq_online(), add and use cpufreq policy locking guards,
use __free() in policy reference counting, and clean up core cpufreq
code on top of that (Rafael Wysocki).
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar).
- Fix des_perf clamping with max_perf in amd_pstate_update() (Dhananjay
Ugwekar).
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it (Dhananjay
Ugwekar).
- Add support for the "Requested CPU Min frequency" BIOS option to the
amd-pstate driver (Dhananjay Ugwekar).
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal).
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor).
- Add helper for governor checks to the schedutil cpufreq governor and
move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki).
- Populate the cpu_capacity sysfs entries from the intel_pstate driver
after registering asym capacity support (Ricardo Neri).
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki).
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab).
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu).
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng).
- OPP: Add dev_pm_opp_set_level() (Praveen Talari).
- Introduce scope-based cleanup headers and mutex locking guards in OPP
core (Viresh Kumar).
- Switch OPP to use kmemdup_array() (Zhang Enpei).
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in the
menu cpuidle governor (Zhongqiu Han).
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla).
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy).
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant).
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla).
- Move debug runtime PM attributes to runtime_attrs[] (Rafael Wysocki).
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás).
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum).
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki).
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel).
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang).
- Add missing wakeup source attribute relax_count to sysfs and
remove the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu).
- Add configurable pm_test delay for hibernation (Zihuan Zhang).
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter).
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki).
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmg0xS0SHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1AwwH/Rvgza5YBPb9JZqWJT/ZiBw7HcEWHhP1
fNfcVU1gXPZiF0yoPfjfJua6BcLj6lyQ3d/+zWqqAcWfmRSD6HPe8yYz8qALUAqj
RWhDa04aGj6B9bQuOjejatznYlQlkwCRT7zec+75D+dAHVMqR/Vt2LFAetCadgHe
MQibAQmVFXu3RFkBjReTAdGzVoTXkwoZDrzdfA2aFAfMJNtJpOW4atUZvnucuctv
VK3ZratrctCIw7yXEoB1nWSmlY7R5JlslplBfndjmmOnky3YxNr7C6paqwtbTWoF
MiX48qkmLOGeO6gS8s/lVCDQ4oZ+UNFQvXRsM5NGjycBikhHX/dp/w4=
=dIqJ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, the changes are dominated by cpufreq updates, but this
time the majority of them are cpufreq core changes, mostly related to
the introduction of policy locking guards and __free() usage, and
fixes related to boost handling.
Still, there is also a significant update of the intel_pstate driver
making it register an energy model when running on a hybrid platform
which is used for enabling energy-aware scheduling (EAS) if the driver
operates in the passive mode (and schedutil is used as the cpufreq
governor for all CPUs which is the passive mode default).
There are some amd-pstate driver updates too, for a good measure,
including the "Requested CPU Min frequency" BIOS option support and
new online/offline callbacks.
In the cpuidle space, the most significant change is the addition of a
C1 demotion on/off sysfs knob to intel_idle which should help some
users to configure their systems more precisely. There is also the
conversion of the PSCI cpuidle driver to a faux device one and there
are two small updates of cpuidle governors.
Device power management is also modified quite a bit, especially the
handling of devices with asynchronous suspend and resume enabled
during system transitions. They are now going to be handled more
asynchronously during suspend transitions and somewhat less
aggressively during resume transitions.
Apart from the above, the operating performance points (OPP) library
is now going to use mutex locking guards and scope-based cleanup
helpers and there is the usual bunch of assorted fixes and code
cleanups.
Specifics:
- Fix potential division-by-zero error in em_compute_costs() (Yaxiong
Tian)
- Fix typos in energy model documentation and example driver code
(Moon Hee Lee, Atul Kumar Pant)
- Rearrange the energy model management code and add a new function
for adjusting a CPU energy model after adjusting the capacity of
the given CPU to it (Rafael Wysocki)
- Refactor cpufreq_online(), add and use cpufreq policy locking
guards, use __free() in policy reference counting, and clean up
core cpufreq code on top of that (Rafael Wysocki)
- Fix boost handling on CPU suspend/resume and sysfs updates (Viresh
Kumar)
- Fix des_perf clamping with max_perf in amd_pstate_update()
(Dhananjay Ugwekar)
- Add offline, online and suspend callbacks to the amd-pstate driver,
rename and use the existing amd_pstate_epp callbacks in it
(Dhananjay Ugwekar)
- Add support for the "Requested CPU Min frequency" BIOS option to
the amd-pstate driver (Dhananjay Ugwekar)
- Reset amd-pstate driver mode after running selftests (Swapnil
Sapkal)
- Avoid shadowing ret in amd_pstate_ut_check_driver() (Nathan
Chancellor)
- Add helper for governor checks to the schedutil cpufreq governor
and move cpufreq-specific EAS checks to cpufreq (Rafael Wysocki)
- Populate the cpu_capacity sysfs entries from the intel_pstate
driver after registering asym capacity support (Ricardo Neri)
- Add support for enabling Energy-aware scheduling (EAS) to the
intel_pstate driver when operating in the passive mode on a hybrid
platform (Rafael Wysocki)
- Drop redundant cpus_read_lock() from store_local_boost() in the
cpufreq core (Seyediman Seyedarab)
- Replace sscanf() with kstrtouint() in the cpufreq code and use a
symbol instead of a raw number in it (Bowen Yu)
- Add support for autonomous CPU performance state selection to the
CPPC cpufreq driver (Lifeng Zheng)
- OPP: Add dev_pm_opp_set_level() (Praveen Talari)
- Introduce scope-based cleanup headers and mutex locking guards in
OPP core (Viresh Kumar)
- Switch OPP to use kmemdup_array() (Zhang Enpei)
- Optimize bucket assignment when next_timer_ns equals KTIME_MAX in
the menu cpuidle governor (Zhongqiu Han)
- Convert the cpuidle PSCI driver to a faux device one (Sudeep Holla)
- Add C1 demotion on/off sysfs knob to the intel_idle driver (Artem
Bityutskiy)
- Fix typos in two comments in the teo cpuidle governor (Atul Kumar
Pant)
- Fix denying of auto suspend in pm_suspend_timer_fn() (Charan Teja
Kalla)
- Move debug runtime PM attributes to runtime_attrs[] (Rafael
Wysocki)
- Add new devm_ functions for enabling runtime PM and runtime PM
reference counting (Bence Csókás)
- Remove size arguments from strscpy() calls in the hibernation core
code (Thorsten Blum)
- Adjust the handling of devices with asynchronous suspend enabled
during system suspend and resume to start resuming them immediately
after resuming their parents and to start suspending such a device
immediately after suspending its first child (Rafael Wysocki)
- Adjust messages printed during tasks freezing to avoid using
pr_cont() (Andrew Sayers, Paul Menzel)
- Clean up unnecessary usage of !! in pm_print_times_init() (Zihuan
Zhang)
- Add missing wakeup source attribute relax_count to sysfs and remove
the space character at the end ofi the string produced by
pm_show_wakelocks() (Zijun Hu)
- Add configurable pm_test delay for hibernation (Zihuan Zhang)
- Disable asynchronous suspend in ucsi_ccg_probe() to prevent the
cypd4226 device on Tegra boards from suspending prematurely (Jon
Hunter)
- Unbreak printing PM debug messages during hibernation and clean up
some related code (Rafael Wysocki)
- Add a systemd service to run cpupower and change cpupower binding's
Makefile to use -lcpupower (John B. Wyatt IV, Francesco Poli)"
* tag 'pm-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (72 commits)
cpufreq: CPPC: Add support for autonomous selection
cpufreq: Update sscanf() to kstrtouint()
cpufreq: Replace magic number
OPP: switch to use kmemdup_array()
PM: freezer: Rewrite restarting tasks log to remove stray *done.*
PM: runtime: fix denying of auto suspend in pm_suspend_timer_fn()
cpufreq: drop redundant cpus_read_lock() from store_local_boost()
cpupower: do not install files to /etc/default/
cpupower: do not call systemctl at install time
cpupower: do not write DESTDIR to cpupower.service
PM: sleep: Introduce pm_sleep_transition_in_progress()
cpufreq/amd-pstate: Avoid shadowing ret in amd_pstate_ut_check_driver()
cpufreq: intel_pstate: Document hybrid processor support
cpufreq: intel_pstate: EAS: Increase cost for CPUs using L3 cache
cpufreq: intel_pstate: EAS support for hybrid platforms
PM: EM: Introduce em_adjust_cpu_capacity()
PM: EM: Move CPU capacity check to em_adjust_new_capacity()
PM: EM: Documentation: Fix typos in example driver code
cpufreq: Drop policy locking from cpufreq_policy_is_good_for_eas()
PM: sleep: Introduce pm_suspend_in_progress()
...
|
||
|
Rafael J. Wysocki
|
1b17d4525b |
PM: sleep: Print PM debug messages during hibernation
Commit |
||
|
Zihuan Zhang
|
50c9bb30dc |
PM: hibernate: add configurable delay for pm_test
Turn the default 5 second test delay for hibernation into a configurable module parameter, so users can determine how long to wait in this pseudo-hibernate state before resuming the system. The configurable delay parameter has been added for suspend, so add an analogous one for hibernation. Example (wait 30 seconds); # echo 30 > /sys/module/hibernate/parameters/pm_test_delay # echo core > /sys/power/pm_test Signed-off-by: Zihuan Zhang <zhangzihuan@kylinos.cn> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patch.msgid.link/20250507063520.419635-1-zhangzihuan@kylinos.cn [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Christian Brauner
|
eacfbf7419
|
power: freeze filesystems during suspend/resume
Now all the pieces are in place to actually allow the power subsystem to freeze/thaw filesystems during suspend/resume. Filesystems are only frozen and thawed if the power subsystem does actually own the freeze. We could bubble up errors and fail suspend/resume if the error isn't EBUSY (aka it's already frozen) but I don't think that this is worth it. Filesystem freezing during suspend/resume is best-effort. If the user has 500 ext4 filesystems mounted and 4 fail to freeze for whatever reason then we simply skip them. What we have now is already a big improvement and let's see how we fare with it before making our lives even harder (and uglier) than we have to. We add a new sysctl know /sys/power/freeze_filesystems that will allow userspace to freeze filesystems during suspend/hibernate. For now it defaults to off. The thaw logic doesn't require checking whether freezing is enabled because the power subsystem exclusively owns frozen filesystems for the duration of suspend/hibernate and is able to skip filesystems it doesn't need to freeze. Also it is technically possible that filesystem filesystem_freeze_enabled is true and power freezes the filesystems but before freezing all processes another process disables filesystem_freeze_enabled. If power were to place the filesystems_thaw() call under filesystems_freeze_enabled it would fail to thaw the fileystems it frozw. The exclusive holder mechanism makes it possible to iterate through the list without any concern making sure that no filesystems are left frozen. Link: https://lore.kernel.org/r/20250402-work-freeze-v2-3-6719a97b52ac@kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Thorsten Blum
|
cfdb7520f9 |
PM: hibernate: Remove size arguments when calling strscpy()
The size parameter is optional and strscpy() automatically determines the length of the destination buffer using sizeof() if the argument is omitted. This makes the explicit sizeof() calls unnecessary. Remove them to shorten and simplify the code. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Link: https://patch.msgid.link/20250318080755.61126-2-thorsten.blum@linux.dev Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Linus Torvalds
|
e5e0e6bebe |
This update includes the following changes:
API: - Remove legacy compression interface. - Improve scatterwalk API. - Add request chaining to ahash and acomp. - Add virtual address support to ahash and acomp. - Add folio support to acomp. - Remove NULL dst support from acomp. Algorithms: - Library options are fuly hidden (selected by kernel users only). - Add Kerberos5 algorithms. - Add VAES-based ctr(aes) on x86. - Ensure LZO respects output buffer length on compression. - Remove obsolete SIMD fallback code path from arm/ghash-ce. Drivers: - Add support for PCI device 0x1134 in ccp. - Add support for rk3588's standalone TRNG in rockchip. - Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93. - Fix bugs in tegra uncovered by multi-threaded self-test. - Fix corner cases in hisilicon/sec2. Others: - Add SG_MITER_LOCAL to sg miter. - Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmfiQ9kACgkQxycdCkmx i6fFZg/9GWjC1FLEV66vNlYAIzFGwzwWdFGyQzXyP235Cphhm4qt9gx7P91N6Lvc pplVjNEeZHoP8lMw+AIeGc2cRhIwsvn8C+HA3tCBOoC1qSe8T9t7KHAgiRGd/0iz UrzVBFLYlR9i4tc0T5peyQwSctv8DfjWzduTmI3Ts8i7OQcfeVVgj3sGfWam7kjF 1GJWIQH7aPzT8cwFtk8gAK1insuPPZelT1Ppl9kUeZe0XUibrP7Gb5G9simxXAyi B+nLCaJYS6Hc1f47cfR/qyZSeYQN35KTVrEoKb1pTYXfEtMv6W9fIvQVLJRYsqpH RUBdDJUseE+WckR6glX9USrh+Fv9d+HfsTXh1fhpApKU5sQJ7pDbUm4ge8p6htNG MIszbJPdqajYveRLuPUjFlUXaqomos8eT6BZA+RLHm1cogzEOm+5bjspbfRNAVPj x9KiDu5lXNiFj02v/MkLKUe3bnGIyVQnZNi7Rn0Rpxjv95tIjVpksZWMPJarxUC6 5zdyM2I5X0Z9+teBpbfWyqfzSbAs/KpzV8S/xNvWDUT6NlpYGBeNXrCDTXcwJLAh PRW0w1EJUwsZbPi8GEh5jNzo/YK1cGsUKrihKv7YgqSSopMLI8e/WVr8nKZMVDFA O+6F6ec5lR7KsOIMGUqrBGFU1ccAeaLLvLK3H5J8//gMMg82Uik= =aQNt -----END PGP SIGNATURE----- Merge tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Remove legacy compression interface - Improve scatterwalk API - Add request chaining to ahash and acomp - Add virtual address support to ahash and acomp - Add folio support to acomp - Remove NULL dst support from acomp Algorithms: - Library options are fuly hidden (selected by kernel users only) - Add Kerberos5 algorithms - Add VAES-based ctr(aes) on x86 - Ensure LZO respects output buffer length on compression - Remove obsolete SIMD fallback code path from arm/ghash-ce Drivers: - Add support for PCI device 0x1134 in ccp - Add support for rk3588's standalone TRNG in rockchip - Add Inside Secure SafeXcel EIP-93 crypto engine support in eip93 - Fix bugs in tegra uncovered by multi-threaded self-test - Fix corner cases in hisilicon/sec2 Others: - Add SG_MITER_LOCAL to sg miter - Convert ubifs, hibernate and xfrm_ipcomp from legacy API to acomp" * tag 'v6.15-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (187 commits) crypto: testmgr - Add multibuffer acomp testing crypto: acomp - Fix synchronous acomp chaining fallback crypto: testmgr - Add multibuffer hash testing crypto: hash - Fix synchronous ahash chaining fallback crypto: arm/ghash-ce - Remove SIMD fallback code path crypto: essiv - Replace memcpy() + NUL-termination with strscpy() crypto: api - Call crypto_alg_put in crypto_unregister_alg crypto: scompress - Fix incorrect stream freeing crypto: lib/chacha - remove unused arch-specific init support crypto: remove obsolete 'comp' compression API crypto: compress_null - drop obsolete 'comp' implementation crypto: cavium/zip - drop obsolete 'comp' implementation crypto: zstd - drop obsolete 'comp' implementation crypto: lzo - drop obsolete 'comp' implementation crypto: lzo-rle - drop obsolete 'comp' implementation crypto: lz4hc - drop obsolete 'comp' implementation crypto: lz4 - drop obsolete 'comp' implementation crypto: deflate - drop obsolete 'comp' implementation crypto: 842 - drop obsolete 'comp' implementation crypto: nx - Migrate to scomp API ... |
||
|
Linus Torvalds
|
96050814a3 |
printk changes for 6.15
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmflJC4ACgkQUqAMR0iA lPIEMBAAsIJmQPHdZUQ49tkMGMoQPU9gnrrDZbRzN9IWwMQQymwEobSEkJkrx7O3 MFQHc5Z29cAxDqrWDCG5hrH0P3rd994pLPgC/XZC9+UbksYIkIrudCqaPaekLVaw BQmBZnZRe7PltOiDpx/TxQ8WQgNlAmZpLpIRTB3ePHZpikq/mf4CGcoYXkrNij1j E7uzurLZssJwXasRkWOVNvaOFyVcxrjn78H0JoT7mVeh2IUkWyMALX4IyDeD6Uvh SCe19/6W3Uyeh/jpJ6+gjuirVy/Vam/2GXeer4yKpgSQBtsqIaGyki4Cc6Xy12gU 71nRPTggysZXNnqZ40qw68Irb9JGAo63qFDwWf3OQI+yQQWHyGZIinxr+2xupwWF ZgmDJtvUsWKHT4+WmB9+MVTGW7Jy8wKq2u/Haf8xCJxs2yhI0J8iUvQi3CPAMdRH Q8G9UJP29Lfj0hdKVT2/wVNGxZKIZ8c6v1vR6Rd1hJ0Zqp4Oj+XGr0btE8Ah5LYv GI/M00LCdTNT2kBbbw8lekovUIs2stiRl6hfKoQFR11oiZwFDUePLDdJH2GiJAZm g9fPs6YuBERfPtzUeo9a9UbSd6oPTLgLNBEklpHUTWilzO8E/Jh+ZXyvQwj7eXyq Hi4OnShn1uxL68o6DJfKsF2qW8S2U5g61JrU3D1CaQ98Derrp0o= =lNTZ -----END PGP SIGNATURE----- Merge tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk updates from Petr Mladek: - New option "printk.debug_non_panic_cpus" allows to store printk messages from non-panic CPUs during panic. It might be useful when panic() fails. It is disabled by default because it increases the chance to see the messages printed before panic() and on the panic-CPU. - New build option "CONFIG_NULL_TTY_DEFAULT_CONSOLE" allows to build kernel without the virtual terminal support which prefers ttynull over serial console. - Do not unblank suspended consoles. - Some code clean up. * tag 'printk-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk/panic: Add option to allow non-panic CPUs to write to the ring buffer. printk: Add an option to allow ttynull to be a default console device printk: Check CON_SUSPEND when unblanking a console printk: Rename console_start to console_resume printk: Rename console_stop to console_suspend printk: Rename resume_console to console_resume_all printk: Rename suspend_console to console_suspend_all |
||
|
Herbert Xu
|
b03d542c3c |
PM: hibernate: Use crypto_acomp interface
Replace the legacy crypto compression interface with the new acomp interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Marcos Paulo de Souza
|
63830aef74 |
printk: Rename resume_console to console_resume_all
The function resume_console has a misleading name, since it resumes all consoles, so rename it accordingly. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-2-0b878577f2e6@suse.com [pmladek@suse.com: Fixed typo in the commit message.] Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
|
Marcos Paulo de Souza
|
e9cec4487c |
printk: Rename suspend_console to console_suspend_all
The function suspend_console has a misleading name, since it suspends all consoles, so rename it accordingly. Signed-off-by: Marcos Paulo de Souza <mpdesouza@suse.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: John Ogness <john.ogness@linutronix.de> Link: https://lore.kernel.org/r/20250226-printk-renaming-v1-1-0b878577f2e6@suse.com [pmladek@suse.com: Fixed typo in the commit message.] Signed-off-by: Petr Mladek <pmladek@suse.com> |
||
|
Lizhi Xu
|
52323ed144 |
PM: hibernate: Avoid deadlock in hibernate_compressor_param_set()
syzbot reported a deadlock in lock_system_sleep() (see below).
The write operation to "/sys/module/hibernate/parameters/compressor"
conflicts with the registration of ieee80211 device, resulting in a deadlock
when attempting to acquire system_transition_mutex under param_lock.
To avoid this deadlock, change hibernate_compressor_param_set() to use
mutex_trylock() for attempting to acquire system_transition_mutex and
return -EBUSY when it fails.
Task flags need not be saved or adjusted before calling
mutex_trylock(&system_transition_mutex) because the caller is not going
to end up waiting for this mutex and if it runs concurrently with system
suspend in progress, it will be frozen properly when it returns to user
space.
syzbot report:
syz-executor895/5833 is trying to acquire lock:
ffffffff8e0828c8 (system_transition_mutex){+.+.}-{4:4}, at: lock_system_sleep+0x87/0xa0 kernel/power/main.c:56
but task is already holding lock:
ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: kernel_param_lock kernel/params.c:607 [inline]
ffffffff8e07dc68 (param_lock){+.+.}-{4:4}, at: param_attr_store+0xe6/0x300 kernel/params.c:586
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (param_lock){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
ieee80211_rate_control_ops_get net/mac80211/rate.c:220 [inline]
rate_control_alloc net/mac80211/rate.c:266 [inline]
ieee80211_init_rate_ctrl_alg+0x18d/0x6b0 net/mac80211/rate.c:1015
ieee80211_register_hw+0x20cd/0x4060 net/mac80211/main.c:1531
mac80211_hwsim_new_radio+0x304e/0x54e0 drivers/net/wireless/virtual/mac80211_hwsim.c:5558
init_mac80211_hwsim+0x432/0x8c0 drivers/net/wireless/virtual/mac80211_hwsim.c:6910
do_one_initcall+0x128/0x700 init/main.c:1257
do_initcall_level init/main.c:1319 [inline]
do_initcalls init/main.c:1335 [inline]
do_basic_setup init/main.c:1354 [inline]
kernel_init_freeable+0x5c7/0x900 init/main.c:1568
kernel_init+0x1c/0x2b0 init/main.c:1457
ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:148
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
-> #2 (rtnl_mutex){+.+.}-{4:4}:
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
wg_pm_notification drivers/net/wireguard/device.c:80 [inline]
wg_pm_notification+0x49/0x180 drivers/net/wireguard/device.c:64
notifier_call_chain+0xb7/0x410 kernel/notifier.c:85
notifier_call_chain_robust kernel/notifier.c:120 [inline]
blocking_notifier_call_chain_robust kernel/notifier.c:345 [inline]
blocking_notifier_call_chain_robust+0xc9/0x170 kernel/notifier.c:333
pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102
snapshot_open+0x189/0x2b0 kernel/power/user.c:77
misc_open+0x35a/0x420 drivers/char/misc.c:179
chrdev_open+0x237/0x6a0 fs/char_dev.c:414
do_dentry_open+0x735/0x1c40 fs/open.c:956
vfs_open+0x82/0x3f0 fs/open.c:1086
do_open fs/namei.c:3830 [inline]
path_openat+0x1e88/0x2d80 fs/namei.c:3989
do_filp_open+0x20c/0x470 fs/namei.c:4016
do_sys_openat2+0x17a/0x1e0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x175/0x210 fs/open.c:1454
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #1 ((pm_chain_head).rwsem){++++}-{4:4}:
down_read+0x9a/0x330 kernel/locking/rwsem.c:1524
blocking_notifier_call_chain_robust kernel/notifier.c:344 [inline]
blocking_notifier_call_chain_robust+0xa9/0x170 kernel/notifier.c:333
pm_notifier_call_chain_robust+0x27/0x60 kernel/power/main.c:102
snapshot_open+0x189/0x2b0 kernel/power/user.c:77
misc_open+0x35a/0x420 drivers/char/misc.c:179
chrdev_open+0x237/0x6a0 fs/char_dev.c:414
do_dentry_open+0x735/0x1c40 fs/open.c:956
vfs_open+0x82/0x3f0 fs/open.c:1086
do_open fs/namei.c:3830 [inline]
path_openat+0x1e88/0x2d80 fs/namei.c:3989
do_filp_open+0x20c/0x470 fs/namei.c:4016
do_sys_openat2+0x17a/0x1e0 fs/open.c:1428
do_sys_open fs/open.c:1443 [inline]
__do_sys_openat fs/open.c:1459 [inline]
__se_sys_openat fs/open.c:1454 [inline]
__x64_sys_openat+0x175/0x210 fs/open.c:1454
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
-> #0 (system_transition_mutex){+.+.}-{4:4}:
check_prev_add kernel/locking/lockdep.c:3163 [inline]
check_prevs_add kernel/locking/lockdep.c:3282 [inline]
validate_chain kernel/locking/lockdep.c:3906 [inline]
__lock_acquire+0x249e/0x3c40 kernel/locking/lockdep.c:5228
lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5851
__mutex_lock_common kernel/locking/mutex.c:585 [inline]
__mutex_lock+0x19b/0xb10 kernel/locking/mutex.c:730
lock_system_sleep+0x87/0xa0 kernel/power/main.c:56
hibernate_compressor_param_set+0x1c/0x210 kernel/power/hibernate.c:1452
param_attr_store+0x18f/0x300 kernel/params.c:588
module_attr_store+0x55/0x80 kernel/params.c:924
sysfs_kf_write+0x117/0x170 fs/sysfs/file.c:139
kernfs_fop_write_iter+0x33d/0x500 fs/kernfs/file.c:334
new_sync_write fs/read_write.c:586 [inline]
vfs_write+0x5ae/0x1150 fs/read_write.c:679
ksys_write+0x12b/0x250 fs/read_write.c:731
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
other info that might help us debug this:
Chain exists of:
system_transition_mutex --> rtnl_mutex --> param_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(param_lock);
lock(rtnl_mutex);
lock(param_lock);
lock(system_transition_mutex);
*** DEADLOCK ***
Reported-by: syzbot+ace60642828c074eb913@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ace60642828c074eb913
Signed-off-by: Lizhi Xu <lizhi.xu@windriver.com>
Link: https://patch.msgid.link/20250224013139.3994500-1-lizhi.xu@windriver.com
[ rjw: New subject matching the code changes, changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Wentao Liang
|
e20a70c572 |
PM: hibernate: Add error handling for syscore_suspend()
In hibernation_platform_enter(), the code did not check the
return value of syscore_suspend(), potentially leading to a
situation where syscore_resume() would be called even if
syscore_suspend() failed. This could cause unpredictable
behavior or system instability.
Modify the code sequence in question to properly handle errors returned
by syscore_suspend(). If an error occurs in the suspend path, the code
now jumps to label 'Enable_irqs' skipping the syscore_resume() call and
only enabling interrupts after setting the system state to SYSTEM_RUNNING.
Fixes:
|
||
|
David Woodhouse
|
3e251afaec |
arm64: Use SYSTEM_OFF2 PSCI call to power off for hibernate
The PSCI v1.3 specification adds support for a SYSTEM_OFF2 function
which is analogous to ACPI S4 state. This will allow hosting
environments to determine that a guest is hibernated rather than just
powered off, and handle that state appropriately on subsequent launches.
Since commit
|
||
|
Xueqin Luo
|
6306653cd8 |
PM: hibernate: Use sysfs_emit() and sysfs_emit_at() in "show" functions
As Documentation/filesystems/sysfs.rst suggested, show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. No functional change intended. Signed-off-by: Xueqin Luo <luoxueqin@kylinos.cn> Link: https://patch.msgid.link/20240801083156.2513508-2-luoxueqin@kylinos.cn Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Justin Stitt
|
7b831bd3cf |
PM: hibernate: replace deprecated strncpy() with strscpy()
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
This kernel config option is simply assigned with the resume_file
buffer. It should be NUL-terminated but not necessarily NUL-padded as
per its further usage with other string apis:
| static int __init find_resume_device(void)
| {
| if (!strlen(resume_file))
| return -ENOENT;
|
| pm_pr_dbg("Checking hibernation image partition %s\n", resume_file);
Use strscpy() [2] as it guarantees NUL-termination on the destination
buffer. Specifically, use the new 2-argument version of strscpy()
introduced in Commit
|
||
|
Nikhil V
|
3fec6e5961 |
PM: hibernate: Support to select compression algorithm
Currently the default compression algorithm is selected based on
compile time options. Introduce a module parameter "hibernate.compressor"
to override this behaviour.
Different compression algorithms have different characteristics and
hibernation may benefit when it uses any of these algorithms, especially
when a secondary algorithm(LZ4) offers better decompression speeds over
a default algorithm(LZO), which in turn reduces hibernation image
restore time.
Users can override the default algorithm in two ways:
1) Passing "hibernate.compressor" as kernel command line parameter.
Usage:
LZO: hibernate.compressor=lzo
LZ4: hibernate.compressor=lz4
2) Specifying the algorithm at runtime.
Usage:
LZO: echo lzo > /sys/module/hibernate/parameters/compressor
LZ4: echo lz4 > /sys/module/hibernate/parameters/compressor
Currently LZO and LZ4 are the supported algorithms. LZO is the default
compression algorithm used with hibernation.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Nikhil V
|
8bc2973635 |
PM: hibernate: Add support for LZ4 compression for hibernation
Extend the support for LZ4 compression to be used with hibernation.
The main idea is that different compression algorithms
have different characteristics and hibernation may benefit when it uses
any of these algorithms: a default algorithm, having higher
compression rate but is slower(compression/decompression) and a
secondary algorithm, that is faster(compression/decompression) but has
lower compression rate.
LZ4 algorithm has better decompression speeds over LZO. This reduces
the hibernation image restore time.
As per test results:
LZO LZ4
Size before Compression(bytes) 682696704 682393600
Size after Compression(bytes) 146502402 155993547
Decompression Rate 335.02 MB/s 501.05 MB/s
Restore time 4.4s 3.8s
LZO is the default compression algorithm used for hibernation. Enable
CONFIG_HIBERNATION_COMP_LZ4 to set the default compressor as LZ4.
Signed-off-by: Nikhil V <quic_nprakash@quicinc.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
||
|
Nikhil V
|
a06c6f5d3c |
PM: hibernate: Move to crypto APIs for LZO compression
Currently for hibernation, LZO is the only compression algorithm available and uses the existing LZO library calls. However, there is no flexibility to switch to other algorithms which provides better results. The main idea is that different compression algorithms have different characteristics and hibernation may benefit when it uses alternate algorithms. By moving to crypto based APIs, it lays a foundation to use other compression algorithms for hibernation. There are no functional changes introduced by this approach. Signed-off-by: Nikhil V <quic_nprakash@quicinc.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Chris Feng
|
0c4cae1bc0 |
PM: hibernate: Avoid missing wakeup events during hibernation
Wakeup events that occur in the hibernation process's hibernation_platform_enter() cannot wake up the system. Although the current hibernation framework will execute part of the recovery process after a wakeup event occurs, it ultimately performs a shutdown operation because the system does not check the return value of hibernation_platform_enter(). In short, if a wakeup event occurs before putting the system into the final low-power state, it will be missed. To solve this problem, check the return value of hibernation_platform_enter(). When it returns -EAGAIN or -EBUSY (indicate the occurrence of a wakeup event), execute the hibernation recovery process, discard the previously saved image, and ultimately return to the working state. Signed-off-by: Chris Feng <chris.feng@mediatek.com> [ rjw: Rephrase the message printed when going back to the working state ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Jan Kara
|
93745df18e
|
PM: hibernate: Drop unused snapshot_test argument
snapshot_test argument is now unused in swsusp_close() and load_image_and_restore(). Drop it CC: linux-pm@vger.kernel.org Acked-by: Christoph Hellwig <hch@lst.de> Acked-by: "Rafael J. Wysocki" <rafael@kernel.org> Acked-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20230927093442.25915-17-jack@suse.cz Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Chen Yu
|
148b6f4cc3 |
PM: hibernate: Fix the exclusive get block device in test_resume mode
Commit |
||
|
Vlastimil Babka
|
df2f7cde73 |
PM: hibernate: fix resume_store() return value when hibernation not available
On a laptop with hibernation set up but not actively used, and with secure boot and lockdown enabled kernel, 6.5-rc1 gets stuck on boot with the following repeated messages: A start job is running for Resume from hibernation using device /dev/system/swap (24s / no limit) lockdown_is_locked_down: 25311154 callbacks suppressed Lockdown: systemd-hiberna: hibernation is restricted; see man kernel_lockdown.7 ... Checking the resume code leads to commit |
||
|
Azat Khuzhin
|
c9e4bf607d |
PM: hibernate: Fix writing maj:min to /sys/power/resume
resume_store() first calls lookup_bdev() and after tries to handle
maj:min, but it does not reset the error before, hence if you will write
maj:min you will get ENOENT:
# echo 259:2 >| /sys/power/resume
bash: echo: write error: No such file or directory
This also should fix hiberation via systemd, since it uses this way.
Fixes:
|
||
|
Christoph Hellwig
|
2736e8eeb0 |
block: use the holder as indication for exclusive opens
The current interface for exclusive opens is rather confusing as it requires both the FMODE_EXCL flag and a holder. Remove the need to pass FMODE_EXCL and just key off the exclusive open off a non-NULL holder. For blkdev_put this requires adding the holder argument, which provides better debug checking that only the holder actually releases the hold, but at the same time allows removing the now superfluous mode argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Acked-by: Christian Brauner <brauner@kernel.org> Acked-by: David Sterba <dsterba@suse.com> [btrfs] Acked-by: Jack Wang <jinpu.wang@ionos.com> [rnbd] Link: https://lore.kernel.org/r/20230608110258.189493-16-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Christoph Hellwig
|
1e8c813b08 |
PM: hibernate: don't use early_lookup_bdev in resume_store
resume_store is a sysfs attribute written during normal kernel runtime,
and it should not use the early_lookup_bdev API that bypasses all normal
path based permission checking, and might cause problems with certain
container environments renaming devices.
Switch to lookup_bdev, which does a normal path lookup instead, and fall
back to trying to parse a numeric dev_t just like early_lookup_bdev did.
Note that this strictly speaking changes the kernel ABI as the PARTUUID=
and PARTLABEL= style syntax is now not available during a running
systems. They never were intended for that, but this breaks things
we'll have to figure out a way to make them available again. But if
avoidable in any way I'd rather avoid that.
Fixes:
|
||
|
Christoph Hellwig
|
cf056a4312 |
init: improve the name_to_dev_t interface
name_to_dev_t has a very misleading name, that doesn't make clear it should only be used by the early init code, and also has a bad calling convention that doesn't allow returning different kinds of errors. Rename it to early_lookup_bdev to make the use case clear, and return an errno, where -EINVAL means the string could not be parsed, and -ENODEV means it the string was valid, but there was no device found for it. Also stub out the whole call for !CONFIG_BLOCK as all the non-block root cases are always covered in the caller. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20230531125535.676098-14-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Christoph Hellwig
|
cc89c63e2f |
PM: hibernate: move finding the resume device out of software_resume
software_resume can be called either from an init call in the boot code, or from sysfs once the system has finished booting, and the two invocation methods this can't race with each other. For the latter case we did just parse the suspend device manually, while the former might not have one. Split software_resume so that the search only happens for the boot case, which also means the special lockdep nesting annotation can go away as the system transition mutex can be taken a little later and doesn't have the sysfs locking nest inside it. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230531125535.676098-5-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Christoph Hellwig
|
d6545e6872 |
PM: hibernate: remove the global snapshot_test variable
Passing call dependent variable in global variables is a huge antipattern. Fix it up. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230531125535.676098-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Christoph Hellwig
|
02b42d58f3 |
PM: hibernate: factor out a helper to find the resume device
Split the logic to find the resume device out software_resume and into a separate helper to start unwindig the convoluted goto logic. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230531125535.676098-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Chen Yu
|
5904de0d73 |
PM: hibernate: Do not get block device exclusively in test_resume mode
The system refused to do a test_resume because it found that the
swap device has already been taken by someone else. Specifically,
the swsusp_check()->blkdev_get_by_dev(FMODE_EXCL) is supposed to
do this check.
Steps to reproduce:
dd if=/dev/zero of=/swapfile bs=$(cat /proc/meminfo |
awk '/MemTotal/ {print $2}') count=1024 conv=notrunc
mkswap /swapfile
swapon /swapfile
swap-offset /swapfile
echo 34816 > /sys/power/resume_offset
echo test_resume > /sys/power/disk
echo disk > /sys/power/state
PM: Using 3 thread(s) for compression
PM: Compressing and saving image data (293150 pages)...
PM: Image saving progress: 0%
PM: Image saving progress: 10%
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
PM: Image saving progress: 20%
PM: Image saving progress: 30%
PM: Image saving progress: 40%
PM: Image saving progress: 50%
pcieport 0000:00:02.5: pciehp: Slot(0-5): No device found
PM: Image saving progress: 60%
PM: Image saving progress: 70%
PM: Image saving progress: 80%
PM: Image saving progress: 90%
PM: Image saving done
PM: hibernation: Wrote 1172600 kbytes in 2.70 seconds (434.29 MB/s)
PM: S|
PM: hibernation: Basic memory bitmaps freed
PM: Image not found (code -16)
This is because when using the swapfile as the hibernation storage,
the block device where the swapfile is located has already been mounted
by the OS distribution(usually mounted as the rootfs). This is not
an issue for normal hibernation, because software_resume()->swsusp_check()
happens before the block device(rootfs) mount. But it is a problem for the
test_resume mode. Because when test_resume happens, the block device has
been mounted already.
Thus remove the FMODE_EXCL for test_resume mode. This would not be a
problem because in test_resume stage, the processes have already been
frozen, and the race condition described in
Commit
|
||
|
Chen Yu
|
08169a162f |
PM: hibernate: Turn snapshot_test into global variable
There is need to check snapshot_test and open block device in different mode, so as to avoid the race condition. No functional changes intended. Suggested-by: Pavankumar Kondeti <quic_pkondeti@quicinc.com> Signed-off-by: Chen Yu <yu.c.chen@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Mario Limonciello
|
85850af4fc |
PM: hibernate: Allow hybrid sleep to work with s2idle
Hybrid sleep is currently hardcoded to only operate with S3 even
on systems that might not support it.
Instead of assuming this mode is what the user wants to use, for
hybrid sleep follow the setting of `mem_sleep_current` which
will respect mem_sleep_default kernel command line and policy
decisions made by the presence of the FADT low power idle bit.
Fixes:
|
||
|
Peter Zijlstra
|
5950e5d574 |
freezer: Have {,un}lock_system_sleep() save/restore flags
Rafael explained that the reason for having both PF_NOFREEZE and
PF_FREEZER_SKIP is that {,un}lock_system_sleep() is callable from
kthread context that has previously called set_freezable().
In preparation of merging the flags, have {,un}lock_system_slee() save
and restore current->flags.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20220822114648.725003428@infradead.org
|
||
|
Dmitry Osipenko
|
2027732600 |
PM: hibernate: Use kernel_can_power_off()
Use new kernel_can_power_off() API instead of legacy pm_power_off global
variable to fix regressed hibernation to disk where machine no longer
powers off when it should because ACPI power driver transitioned to the
new sys-off based API and it doesn't use pm_power_off anymore.
Fixes:
|
||
|
Dan Williams
|
9ea4dcf498 |
PM: CXL: Disable suspend
The CXL specification claims S3 support at a hardware level, but at a system software level there are some missing pieces. Section 9.4 (CXL 2.0) rightly claims that "CXL mem adapters may need aux power to retain memory context across S3", but there is no enumeration mechanism for the OS to determine if a given adapter has that support. Moreover the save state and resume image for the system may inadvertantly end up in a CXL device that needs to be restored before the save state is recoverable. I.e. a circular dependency that is not resolvable without a third party save-area. Arrange for the cxl_mem driver to fail S3 attempts. This still nominaly allows for suspend, but requires unbinding all CXL memory devices before the suspend to ensure the typical DRAM flow is taken. The cxl_mem unbind flow is intended to also tear down all CXL memory regions associated with a given cxl_memdev. It is reasonable to assume that any device participating in a System RAM range published in the EFI memory map is covered by aux power and save-area outside the device itself. So this restriction can be minimized in the future once pre-existing region enumeration support arrives, and perhaps a spec update to clarify if the EFI memory map is sufficent for determining the range of devices managed by platform-firmware for S3 support. Per Rafael, if the CXL configuration prevents suspend then it should fail early before tasks are frozen, and mem_sleep should stop showing 'mem' as an option [1]. Effectively CXL augments the platform suspend ->valid() op since, for example, the ACPI ops are not aware of the CXL / PCI dependencies. Given the split role of platform firmware vs OS provisioned CXL memory it is up to the cxl_mem driver to determine if the CXL configuration has elements that platform firmware may not be prepared to restore. Link: https://lore.kernel.org/r/CAJZ5v0hGVN_=3iU8OLpHY3Ak35T5+JcBM-qs8SbojKrpd0VXsA@mail.gmail.com [1] Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/165066828317.3907920.5690432272182042556.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Linus Torvalds
|
616355cc81 |
for-5.18/block-2022-03-18
-----BEGIN PGP SIGNATURE----- iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmI0+GcQHGF4Ym9lQGtl cm5lbC5kawAKCRD301j7KXHgprUpD/9aTJEnj7VCw7UouSsg098sdjtoy9ilslU3 ew47K8CIXHbCB4CDqLnFyvCwAdG1XGgS+fUmFAxvTr29R9SZeS5d+bXL6sZzEo0C bwxsJy9MM2QRtMvB+giAt1myXbwB8cG+ketMBWXqwXXRHRzPbbQfMZia7FqWMnfY KQanH9IwYHp1oa5U/W6Qcjm4oCnLgBMRwqByzUCtiF3y9qgaLkK+3IgkNwjJQjLA DTeUJ/9CgxGQQbzA+LPktbw2xfTqiUfcKq0mWx6Zt4wwNXn1ClqUDUXX6QSM8/5u 3OimbscSkEPPTIYZbVBPkhFnAlQb4JaJEgOrbXvYKVV2Dh+eZY81XwNeE/E8gdBY TnHOTOCjkN/4sR3hIrWazlJzPLdpPA0eOYrhguCraQsX9mcsYNxlJ9otRv/Ve99g uqL0RZg3+NoK84fm79FCGy/ZmPQJvJttlBT9CKVwylv/Lky42xWe7AdM3OipKluY 2nh+zN5Ai7WxZdTKXQFRhCSWfWQ+1qW51tB3dcGW+BooZr/oox47qKQVcHsEWbq1 RNR45F5a4AuPwYUHF/P36WviLnEuq9AvX7OTTyYOplyVQohKIoDXp9chVzLNzBiZ KBR00W6MLKKKN+8foalQWgNyb2i2PH7Ib4xRXvXj/22Vwxg5UmUoBmSDSas9SZUS +dMo7CtNgA== =DpgP -----END PGP SIGNATURE----- Merge tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block Pull block updates from Jens Axboe: - BFQ cleanups and fixes (Yu, Zhang, Yahu, Paolo) - blk-rq-qos completion fix (Tejun) - blk-cgroup merge fix (Tejun) - Add offline error return value to distinguish it from an IO error on the device (Song) - IO stats fixes (Zhang, Christoph) - blkcg refcount fixes (Ming, Yu) - Fix for indefinite dispatch loop softlockup (Shin'ichiro) - blk-mq hardware queue management improvements (Ming) - sbitmap dead code removal (Ming, John) - Plugging merge improvements (me) - Show blk-crypto capabilities in sysfs (Eric) - Multiple delayed queue run improvement (David) - Block throttling fixes (Ming) - Start deprecating auto module loading based on dev_t (Christoph) - bio allocation improvements (Christoph, Chaitanya) - Get rid of bio_devname (Christoph) - bio clone improvements (Christoph) - Block plugging improvements (Christoph) - Get rid of genhd.h header (Christoph) - Ensure drivers use appropriate flush helpers (Christoph) - Refcounting improvements (Christoph) - Queue initialization and teardown improvements (Ming, Christoph) - Misc fixes/improvements (Barry, Chaitanya, Colin, Dan, Jiapeng, Lukas, Nian, Yang, Eric, Chengming) * tag 'for-5.18/block-2022-03-18' of git://git.kernel.dk/linux-block: (127 commits) block: cancel all throttled bios in del_gendisk() block: let blkcg_gq grab request queue's refcnt block: avoid use-after-free on throttle data block: limit request dispatch loop duration block/bfq-iosched: Fix spelling mistake "tenative" -> "tentative" sr: simplify the local variable initialization in sr_block_open() block: don't merge across cgroup boundaries if blkcg is enabled block: fix rq-qos breakage from skipping rq_qos_done_bio() block: flush plug based on hardware and software queue order block: ensure plug merging checks the correct queue at least once block: move rq_qos_exit() into disk_release() block: do more work in elevator_exit block: move blk_exit_queue into disk_release block: move q_usage_counter release into blk_queue_release block: don't remove hctx debugfs dir from blk_mq_exit_queue block: move blkcg initialization/destroy into disk allocation/release handler sr: implement ->free_disk to simplify refcounting sd: implement ->free_disk to simplify refcounting sd: delay calling free_opal_dev sd: call sd_zbc_release_disk before releasing the scsi_device reference ... |
||
|
Randy Dunlap
|
ba7ffcd4c4 |
PM: hibernate: fix __setup handler error handling
If an invalid value is used in "resumedelay=<seconds>", it is
silently ignored. Add a warning message and then let the __setup
handler return 1 to indicate that the kernel command line option
has been handled.
Fixes:
|
||
|
Ye Bin
|
3f51aa9e29 |
PM: hibernate: fix load_image_and_restore() error path
As 'swsusp_check' open 'hib_resume_bdev', if call 'create_basic_memory_bitmaps' failed, we need to close 'hib_resume_bdev' in 'load_image_and_restore' function. Signed-off-by: Ye Bin <yebin10@huawei.com> [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
||
|
Christoph Hellwig
|
322cbb50de |
block: remove genhd.h
There is no good reason to keep genhd.h separate from the main blkdev.h header that includes it. So fold the contents of genhd.h into blkdev.h and remove genhd.h entirely. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Link: https://lore.kernel.org/r/20220124093913.742411-4-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
Thomas Zeitlhofer
|
cefcf24b4d |
PM: hibernate: use correct mode for swsusp_close()
Commit |
||
|
Rafael J. Wysocki
|
23f62d7ab2 |
PM: sleep: Pause cpuidle later and resume it earlier during system transitions
Commit
|
||
|
Mike Rapoport
|
9a436f8ff6 |
PM: hibernate: disable when there are active secretmem users
It is unsafe to allow saving of secretmem areas to the hibernation snapshot as they would be visible after the resume and this essentially will defeat the purpose of secret memory mappings. Prevent hibernation whenever there are active secret memory users. Link: https://lkml.kernel.org/r/20210518072034.31572-6-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christopher Lameter <cl@linux.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Hagen Paul Pfeifer <hagen@jauu.net> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Bottomley <jejb@linux.ibm.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rick Edgecombe <rick.p.edgecombe@intel.com> Cc: Roman Gushchin <guro@fb.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tycho Andersen <tycho@tycho.ws> Cc: Will Deacon <will@kernel.org> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Vlastimil Babka
|
03b6c9a3e8 |
kernel/power: allow hibernation with page_poison sanity checking
Page poisoning used to be incompatible with hibernation, as the state of poisoned pages was lost after resume, thus enabling CONFIG_HIBERNATION forces CONFIG_PAGE_POISONING_NO_SANITY. For the same reason, the poisoning with zeroes variant CONFIG_PAGE_POISONING_ZERO used to disable hibernation. The latter restriction was removed by commit |
||
|
Linus Torvalds
|
0b8417c141 |
Power management updates for 5.10-rc1
- Rework cpufreq statistics collection to allow it to take place
when fast frequency switching is enabled in the governor (Viresh
Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core
code to support driver-specific devfreq DT bindings (Leonard
Crestez, Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection
statistics and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC
mode (Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow
domain power off transition to be aborted in the absence of the
"power off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they
are power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) driverrs (Kevin Hilman).
-----BEGIN PGP SIGNATURE-----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=rGhy
-----END PGP SIGNATURE-----
Merge tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These rework the collection of cpufreq statistics to allow it to take
place if fast frequency switching is enabled in the governor, rework
the frequency invariance handling in the cpufreq core and drivers, add
new hardware support to a couple of cpufreq drivers, fix a number of
assorted issues and clean up the code all over.
Specifics:
- Rework cpufreq statistics collection to allow it to take place when
fast frequency switching is enabled in the governor (Viresh Kumar).
- Make the cpufreq core set the frequency scale on behalf of the
driver and update several cpufreq drivers accordingly (Ionela
Voinescu, Valentin Schneider).
- Add new hardware support to the STI and qcom cpufreq drivers and
improve them (Alain Volmat, Manivannan Sadhasivam).
- Fix multiple assorted issues in cpufreq drivers (Jon Hunter,
Krzysztof Kozlowski, Matthias Kaehlcke, Pali Rohár, Stephan
Gerhold, Viresh Kumar).
- Fix several assorted issues in the operating performance points
(OPP) framework (Stephan Gerhold, Viresh Kumar).
- Allow devfreq drivers to fetch devfreq instances by DT enumeration
instead of using explicit phandles and modify the devfreq core code
to support driver-specific devfreq DT bindings (Leonard Crestez,
Chanwoo Choi).
- Improve initial hardware resetting in the tegra30 devfreq driver
and clean up the tegra cpuidle driver (Dmitry Osipenko).
- Update the cpuidle core to collect state entry rejection statistics
and expose them via sysfs (Lina Iyer).
- Improve the ACPI _CST code handling diagnostics (Chen Yu).
- Update the PSCI cpuidle driver to allow the PM domain
initialization to occur in the OSI mode as well as in the PC mode
(Ulf Hansson).
- Rework the generic power domains (genpd) core code to allow domain
power off transition to be aborted in the absence of the "power
off" domain callback (Ulf Hansson).
- Fix two suspend-to-idle issues in the ACPI EC driver (Rafael
Wysocki).
- Fix the handling of timer_expires in the PM-runtime framework on
32-bit systems and the handling of device links in it (Grygorii
Strashko, Xiang Chen).
- Add IO requests batching support to the hibernate image saving and
reading code and drop a bogus get_gendisk() from there (Xiaoyi
Chen, Christoph Hellwig).
- Allow PCIe ports to be put into the D3cold power state if they are
power-manageable via ACPI (Lukas Wunner).
- Add missing header file include to a power capping driver (Pujin
Shi).
- Clean up the qcom-cpr AVS driver a bit (Liu Shixin).
- Kevin Hilman steps down as designated reviwer of adaptive voltage
scaling (AVS) drivers (Kevin Hilman)"
* tag 'pm-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
cpufreq: stats: Fix string format specifier mismatch
arm: disable frequency invariance for CONFIG_BL_SWITCHER
cpufreq,arm,arm64: restructure definitions of arch_set_freq_scale()
cpufreq: stats: Add memory barrier to store_reset()
cpufreq: schedutil: Simplify sugov_fast_switch()
ACPI: EC: PM: Drop ec_no_wakeup check from acpi_ec_dispatch_gpe()
ACPI: EC: PM: Flush EC work unconditionally after wakeup
PCI/ACPI: Whitelist hotplug ports for D3 if power managed by ACPI
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
cpufreq: Move traces and update to policy->cur to cpufreq core
cpufreq: stats: Enable stats for fast-switch as well
cpufreq: stats: Mark few conditionals with unlikely()
cpufreq: stats: Remove locking
cpufreq: stats: Defer stats update to cpufreq_stats_record_transition()
PM: domains: Allow to abort power off when no ->power_off() callback
PM: domains: Rename power state enums for genpd
PM / devfreq: tegra30: Improve initial hardware resetting
PM / devfreq: event: Change prototype of devfreq_event_get_edev_by_phandle function
PM / devfreq: Change prototype of devfreq_get_devfreq_by_phandle function
PM / devfreq: Add devfreq_get_devfreq_by_node function
...
|
||
|
Christoph Hellwig
|
428805c0c5 |
PM: hibernate: remove the bogus call to get_gendisk() in software_resume()
get_gendisk grabs a reference on the disk and file operation, so this
code will leak both of them while having absolutely no use for the
gendisk itself.
This effectively reverts commit
|
||
|
Peter Zijlstra
|
70d9329857 |
notifier: Fix broken error handling pattern
The current notifiers have the following error handling pattern all
over the place:
int err, nr;
err = __foo_notifier_call_chain(&chain, val_up, v, -1, &nr);
if (err & NOTIFIER_STOP_MASK)
__foo_notifier_call_chain(&chain, val_down, v, nr-1, NULL)
And aside from the endless repetition thereof, it is broken. Consider
blocking notifiers; both calls take and drop the rwsem, this means
that the notifier list can change in between the two calls, making @nr
meaningless.
Fix this by replacing all the __foo_notifier_call_chain() functions
with foo_notifier_call_chain_robust() that embeds the above pattern,
but ensures it is inside a single lock region.
Note: I switched atomic_notifier_call_chain_robust() to use
the spinlock, since RCU cannot provide the guarantee
required for the recovery.
Note: software_resume() error handling was broken afaict.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20200818135804.325626653@infradead.org
|
||
|
Gustavo A. R. Silva
|
df561f6688 |
treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> |