Return -ENOMEM if udl_alloc_urb_list() fails. Don't return success.
Fixes: fb10144ba4 ("drm/udl: Support adapters without firmware descriptor")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/Z_-P4N4_U-xTC9-O@stanley.mountain
Set default limit on the number of pixels for adapters without
vendor firmware descriptor. The devices work as expected, they
just don't provide any description.
If parsing the vendor firmware descriptor fails, the device falls
back to the given default limits. Failing to allocate memory is
still an error.
v2:
- fix typo in constant (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-10-tzimmermann@suse.de
Rewrite the parser for the vendor firmware descriptor with the
following improvements.
- Validate the key-value length given in a vendor descriptor
against the length of the descriptor. The current code fails
to do this and might read more bytes than available. This can
lead to out-of-bounds reads of the allocated buffer.
- Read raw data with helpers for unaligned data. This allows
the code to run on platforms that do now support unaligned memory
access by default.
- Validate the pixel limit against a default value. The default
comes from real-world devices. If the reported number of pixels
is significantly above the limit, it is likely invalid.
- Drop the obsolete print macros. There is still a warning about
invalid firmware descriptors. The rest of the output is bogus.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-9-tzimmermann@suse.de
The vendor descriptor is an array of unsigned bytes. It is raw data
that is not to be modified. Declare it as 'const u8'.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-8-tzimmermann@suse.de
There need to be least 5 bytes in the vendor descriptor. Return
an error otherwise. Also change the branching to early-out on
the error. Adjust indention of the rest of the parser function.
The original length test expected more than 5 bytes in the vendor
descriptor. As a descriptor with no key-value pairs has exactly 5
bytes and is still valid, change the test to accept this case as
well.
v2
- clarify changes to length test in commit description (Patrik)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-7-tzimmermann@suse.de
Reading the vendor descriptor from the udl device can fail with
an error, which the current code fails to capture. Store the return
value in an integer and test for the error. Abort parsing on errors
or treat the value as length on success.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-6-tzimmermann@suse.de
Push upcasts from struct drm_device to struct udl_device outwards
in the call chain; cast earlier and call functions with the upcasted
value. Improves type safety.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://lore.kernel.org/r/20250410105948.25463-4-tzimmermann@suse.de
The "unode" pointer cannot be NULL here and checking for it causes
Smatch warnings:
drivers/gpu/drm/udl/udl_main.c:259 udl_get_urb_locked()
warn: can 'unode' even be NULL?
Fortunately, it's just harmless dead code which can be removed. It's
left over from commit c5c354a3a4 ("drm/udl: Fix inconsistent urbs.count
value during udl_free_urb_list()").
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/e0e35421-8746-43b6-971e-e25d1cd1d6a7@kili.mountain
It's better to perform the sync at the very last of the suspend
instead of the pipe-disable function, so that we can catch all pending
URBs (if any).
While we're at it, drop the error code from udl_sync_pending_urb()
since we basically ignore it; instead, give a clear error message
indicating a problem.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-13-tiwai@suse.de
udl_alloc_urb_list() retires the allocation if there is no enough room
left, and it reinitializes the stuff unnecessarily such as the linked
list head and the waitqueue, which could be harmful. Those should be
outside the retry loop.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-12-tiwai@suse.de
In the current design, udl_get_urb() may be called asynchronously
during the driver freeing its URL list via udl_free_urb_list().
The problem is that the sync is determined by comparing the urbs.count
and urbs.available fields, while we clear urbs.count field only once
after udl_free_urb_list() finishes, i.e. during udl_free_urb_list(),
the state becomes inconsistent.
For fixing this inconsistency and also for hardening the locking
scheme, this patch does a slight refactoring of the code around
udl_get_urb() and udl_free_urb_list(). Now urbs.count is updated in
the same spinlock at extracting a URB from the list in
udl_free_url_list().
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-11-tiwai@suse.de
A couple of error handlings forgot to process the URB completion.
Those are both with WARN_ON() so should be visible, but we must fix
them in anyway.
Fixes: 7350b2a3fb ("drm/udl: Replace BUG_ON() with WARN_ON()")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-10-tiwai@suse.de
It seems that the current size (4) for the URB list is too small on
some devices, and it resulted in the occasional stalls. Increase the
default URB list size to 20 for working around it.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-7-tiwai@suse.de
The driver may receive -EPROTO at the URB completion when the device
gets disconnected, and it's a normal situation. Suppress the error
print for that, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-6-tiwai@suse.de
This reverts the recent fix commit
e25d595426 ("drm/udl: Kill pending URBs at suspend and disconnect")
as it turned out to lead to potential hangup at a disconnection, and
it doesn't help much for suspend/resume problem, either.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-5-tiwai@suse.de
Implement the reset_resume callback of struct usb_driver. Set the
standard channel when called.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908095115.23396-3-tiwai@suse.de
BUG_ON() is a tasteless choice as a sanity check for a driver like UDL
that isn't really a core code. Replace with WARN_ON() and proper
error handling instead.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-5-tiwai@suse.de
At both suspend and disconnect, we should rather cancel the pending
URBs immediately. For the suspend case, the display will be turned
off, so it makes no sense to process the rendering. And for the
disconnect case, the device may be no longer accessible, hence we
shouldn't do any submission.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-4-tiwai@suse.de
We need to wait for finishing to process the all URBs after disabling
the pipe; otherwise pending URBs may stray at suspend/resume, leading
to a possible memory corruption in a worst case.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-3-tiwai@suse.de
UDL driver uses a semaphore for controlling the emptiness of FIFO in a
slightly funky way. This patch replaces it with a wait queue and
controls the emptiness with the standard wait_event*() macro instead,
which is a more straightforward implementation.
While we are at it, drop the dead code for delayed semaphore down,
too.
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220804075826.27036-2-tiwai@suse.de
USB devices cannot perform DMA and hence have no dma_mask set in their
device structure. Therefore importing dmabuf into a USB-based driver
fails, which breaks joining and mirroring of display in X11.
For USB devices, pick the associated USB controller as attachment device.
This allows the DRM import helpers to perform the DMA setup. If the DMA
controller does not support DMA transfers, we're out of luck and cannot
import. Our current USB-based DRM drivers don't use DMA, so the actual
DMA device is not important.
Tested by joining/mirroring displays of udl and radeon under Gnome/X11.
v8:
* release dmadev if device initialization fails (Noralf)
* fix commit description (Noralf)
v7:
* fix use-before-init bug in gm12u320 (Dan)
v6:
* implement workaround in DRM drivers and hold reference to
DMA device while USB device is in use
* remove dev_is_usb() (Greg)
* collapse USB helper into usb_intf_get_dma_device() (Alan)
* integrate Daniel's TODO statement (Daniel)
* fix typos (Greg)
v5:
* provide a helper for USB interfaces (Alan)
* add FIXME item to documentation and TODO list (Daniel)
v4:
* implement workaround with USB helper functions (Greg)
* use struct usb_device->bus->sysdev as DMA device (Takashi)
v3:
* drop gem_create_object
* use DMA mask of USB controller, if any (Daniel, Christian, Noralf)
v2:
* move fix to importer side (Christian, Daniel)
* update SHMEM and CMA helpers for new PRIME callbacks
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 6eb0233ec2 ("usb: don't inherity DMA properties for USB devices")
Tested-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.de
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Drop the driver's udev field in favor of struct drm_device.dev. No
functional changes made.
v3:
* upcast dev with udl_to_usb_device()
v2:
* upcast dev with drm_dev_get_usb_device()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103113456.3066-3-tzimmermann@suse.de
There's only two functions called from that:
drm_kms_helper_poll_fini() and udl_free_urb_list(). Both of these are
also called from the ubs_driver->disconnect hook, so entirely
pointless to do the same again in the ->release hook.
Furthermore by the time we clean up the drm_driver we really shouldn't
be touching hardware anymore, so stopping the poll worker and freeing
the urb allocations in ->disconnect is the right thing to do.
Now disconnect still cleans things up before unregistering the driver,
but that's a different issue.
v2: Use _fini, not _disable in unplug, motivated by discussions with
Thomas. _disable/_enable are for suspend/resume.
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200323144950.3018436-51-daniel.vetter@ffwll.ch
The udl driver stores the currently active framebuffer to know from
where to accept damage updates.
With the conversion to plane-state damage handling, this is not necessary
any longer. The currently active framebuffer and damaged area are always
stored in the plane state.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191210084905.5570-8-tzimmermann@suse.de
The field lost_pixels in struct udl_device was supposed to signal an
error during USB transfers of the framebuffer data. The driver would
have to schedule a re-transfer at a later point. This code was never
implemented. Remove lost_pixels and return regular error codes instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206085954.9697-8-tzimmermann@suse.de
The framebuffer's 'active_16' flag signals which framebuffer to flush
to device memory. Moving the 'active_16' state from struct udl_framebuffer
into struct udl_device prepares for using the generic GEM framebuffer.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114141025.32198-4-tzimmermann@suse.de
The udl driver can use the generic fbdev implementation. Convert it.
v5:
* initialize console after registering device
v4:
* hardcode console bpp to 16
v3:
* remove module parameter fb_bpp in favor of fbdev's video
* call drm_fbdev_generic_setup() directly; remove udl_fbdev_init()
* use default for struct drm_mode_config_funcs.output_poll_changed
* use default for struct drm_driver.lastclose
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191114125106.28347-2-tzimmermann@suse.de
The drmP.h header file is deprecated.
Drop it from all files in the udl driver.
Made the header files self contained, which then
made it simpler to update the .c files.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Robert Tarasov <tutankhamen@chromium.org>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "Noralf Trønnes" <noralf@tronnes.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Emil Lundmark <lndmrk@chromium.org>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190716064220.18157-9-sam@ravnborg.org
Based on 1 normalized pattern(s):
this file is subject to the terms and conditions of the gnu general
public license v2 see the file copying in the main directory of this
archive for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 11 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141333.582369016@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we unplug a udl device, the usb callback with deinit the
mode_config struct, however userspace will still have an open
file descriptor and a framebuffer on that device. When userspace
closes the fd, we'll oops because it'll try and look stuff up
in the object idr which we've destroyed.
This punts destroying the mode objects until release time instead.
Cc: stable@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190405031715.5959-2-airlied@gmail.com
Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.
To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.
v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.
v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.
This will also conflict with ongoing drmP.h cleanup by others I
expect.
v3: Rebase on top of atomic bochs.
v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
other places (all suggested from Laurent adopted unchanged).
- sort alphabetically
v5: Actually try to sort them, and while at it, sort all the ones I
touch.
v6: Rebase onto i915 changes.
v7: Rebase once more.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: CK Hu <ck.hu@mediatek.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch
UDL doesn't support vblank functionality so we don't need to
initialize vblank here (we are able to send page flip
completion events even without vblank initialization)
Moreover current drm_vblank_init call with num_crtcs > 0 causes
sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every
time. This breaks userspace apps (for example weston) which
relies on timestamp value.
Cc: stable@vger.kernel.org
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928144126.21598-1-Eugeniy.Paltsev@synopsys.com
spin_lock_irqsave and spin_unlock_irqrestore is inteded to be called from
a context where it is unknown if interrupts are enabled or disabled (such
as interrupt handlers). From a process context, we should call
spin_lock_irq and spin_unlock_irq, that avoids the costly pushf and popf
instructions.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Allocations larger than PAGE_ALLOC_COSTLY_ORDER are unreliable and they
may fail anytime. This patch fixes the udl kms driver so that when a large
alloactions fails, it tries to do multiple smaller allocations.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
If we leave urbs around, it causes not only leak, but also memory
corruption. This patch fixes the function udl_free_urb_list, so that it
always waits for all urbs that are in progress.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
It's only used to protect our page list, and only when we know we have
a full reference. This means none of these code paths can ever race
with the final unref, and hence we do not need dev->struct_mutex
serialization and can simply switch to our own locking.
For more context the only magic the locked gem_free_object provides is
that it prevents concurrent final unref (and destruction) of gem
objects while anyone is holding dev->struct_mutex. This was used by
i915 (and other drivers) to implement eviction handling with less
headaches.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180327082356.24516-3-daniel.vetter@ffwll.ch
Fixed problem with DisplayLink and DisplayLink certified adapers in drm/udl
driver when adapter doesn't want to work if it was initialized with
disconnected DVI cable by enabling drm connectot polling and updating
current connector's state.
Signed-off-by: Robert Tarasov <tutankhamen@chromium.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171013001350.172155-1-tutankhamen@chromium.org
The integer returned by the unload hook is ignored by the drm core, so
let's make it void.
This patch was created using the following Coccinelle semantic script
(except for the declaration and comment in drm_drv.h):
Compile-tested only.
// <smpl>
@ get_name @
struct drm_driver drv;
identifier fn;
@@
drv.unload = fn;
@ replace_type @
identifier get_name.fn;
@@
- int
+ void
fn (...)
{
...
}
@ remove_return_param @
identifier get_name.fn;
@@
void fn (...)
{
<...
if (...)
return
- ...
;
...>
}
@ drop_final_return @
identifier get_name.fn;
@@
void fn (...)
{
...
- return 0;
}
// </smpl>
Suggested-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Acked-by: Christian König <christian.koenig@amd.com>.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170106175731.29196-1-krisman@collabora.co.uk
Thou shall not send control msg from the stack,
does that mean I can send it from the RO memory area?
and it looks like the answer is no, so here's
v2 which kmemdups.
Reported-by: poma
Tested-by: poma <poma@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This merges all the remains of drm_usb into its only user, udl. We can
then drop all the drm_usb stuff, including dev->usbdev.
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is needed to be able to send page flip completion events.
Also while I'm at it, fix the error paths on init.
Signed-off-by: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull drm updates from Dave Airlie:
"This is the main drm merge window pull request, changes all over the
place, mostly normal levels of churn.
Highlights:
Core drm:
More cleanups, fix race on connector/encoder naming, docs updates,
object locking rework in prep for atomic modeset
i915:
mipi DSI support, valleyview power fixes, cursor size fixes,
execlist refactoring, vblank improvements, userptr support, OOM
handling improvements
radeon:
GPUVM tuning and large page size support, gart fixes, deep color
HDMI support, HDMI audio cleanups
nouveau:
- displayport rework should fix lots of issues
- initial gk20a support
- gk110b support
- gk208 fixes
exynos:
probe order fixes, HDMI changes, IPP consolidation
msm:
debugfs updates, misc fixes
ast:
ast2400 support, sync with UMS driver
tegra:
cleanups, hdmi + hw cursor for Tegra 124.
panel:
fixes existing panels add some new ones.
ipuv3:
moved from staging to drivers/gpu"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits)
drm/nouveau/disp/dp: fix tmds passthrough on dp connector
drm/nouveau/dp: probe dpcd to determine connectedness
drm/nv50-: trigger update after all connectors disabled
drm/nv50-: prepare for attaching a SOR to multiple heads
drm/gf119-/disp: fix debug output on update failure
drm/nouveau/disp/dp: make use of postcursor when its available
drm/g94-/disp/dp: take max pullup value across all lanes
drm/nouveau/bios/dp: parse lane postcursor data
drm/nouveau/dp: fix support for dpms
drm/nouveau: register a drm_dp_aux channel for each dp connector
drm/g94-/disp: add method to power-off dp lanes
drm/nouveau/disp/dp: maintain link in response to hpd signal
drm/g94-/disp: bash and wait for something after changing lane power regs
drm/nouveau/disp/dp: split link config/power into two steps
drm/nv50/disp: train PIOR-attached DP from second supervisor
drm/nouveau/disp/dp: make use of existing output data for link training
drm/gf119/disp: start removing direct vbios parsing from supervisor
drm/nv50/disp: start removing direct vbios parsing from supervisor
drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal
drm/nouveau/disp/dp: create subclass for dp outputs
...
Parsing device descriptors can fail due to a failed memory
allocation. The error needs to be properly propagated to the
upper layers.
Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
