Add a description for the get_csb_buffer callback, update the glossary,
and add some extra information about RB, which is associated with CSB
configuration.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From GFX6 to GFX11, there is a function for getting the CSB buffer to be
put into the hardware. Three common parts are duplicated in all of these
GFX functions:
1. Prepare the CSB preamble.
2. Parser the CS data.
3. End the CSB preamble.
This commit creates helpers to be used from GFX6 to GFX11.
Signed-off-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since they will be used for both KFD and KGD user queues,
rename them from kfd to userq. No intended functional
change.
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace disable_kq parameter with user_queue parameter.
The parameter has the following logic:
-1 = auto (ASIC specific default)
0 = user queues disabled
1 = user queues enabled and kernel queues enabled (if supported)
2 = user queues enabled and kernel queues disabled
The default behavior (-1) is currently the same as 0 for current
ASICs. To enable user queues (in addition to kernel queues) set
user_queue=1. To enable user queues and disable kernel queues
(to make all resources available to user queues), set user_queue=2.
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add proper checks for disable_kq functionality in
gfx helper functions. Add special logic for families
that require the clear state setup.
v2: use ring count as per Felix suggestion
v3: fix num_gfx_rings handling in amdgpu_gfx_graphics_queue_acquire()
v4: fix error code (Alex)
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the shadow FW space size and alignment information is
protected under a flag (adev->gfx.cp_gfx_shadow) which gets set
only in case of SRIOV setups.
if (amdgpu_sriov_vf(adev))
adev->gfx.cp_gfx_shadow = true;
But we need this information for GFX Userqueues, so that user can
create these objects while creating userqueue. This patch series
creates a method to get this information bypassing the dependency
on this check.
This patch:
- adds a new input parameter flag to the gfx.funcs->get_gfx_shadow_info
fptr definition, so that it can accommodate the information without the
check (adev->gfx.cp_gfx_shadow) on request.
- updates the existing definition of amdgpu_gfx_get_gfx_shadow_info to
adjust with this new flag.
Next patch in the series is adding a UAPI which will consume this info.
V2: split this patch from the new UAPI patch
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Arvind Yadav <arvind.yadav@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shashank Sharma <shashank.sharma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 55ff973fe1.
Reason for revert: this causes some tests fail with call trace.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to make sure the workload profile ref counts are
balanced. This isn't currently the case because we can
increment the count on submissions, but the decrement may
be delayed as work comes in. Track when we enable the
workload profile so the references are balanced.
v2: switch to a mutex and active flag
v3: fix mutex init
Fixes: 8fdb3958e3 ("drm/amdgpu/gfx: add ring helpers for setting workload profile")
Cc: Yang Wang <kevinyang.wang@amd.com>
Cc: Kenneth Feng <kenneth.feng@amd.com>
Tested-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shorten the gfx idle worker timeout. This is to sync with
DAL when there is no activity on the screen. Original 1
second can not sync with DAL, so DAL can not apply MALL
when the workload type is not bootup default.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Same as amdgpu_gfx_off_ctrl(), but without the delay
for gfxoff disallow.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Suggested-by: Błażej Szczygieł <mumei6102@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add helpers to switch the workload profile dynamically when
commands are submitted. This allows us to switch to
the FULLSCREEN3D or COMPUTE profile when work is submitted.
Add a delayed work handler to delay switching out of the
selected profile if additional work comes in. This works
the same as the VIDEO profile for VCN. This lets dynamically
enable workload profiles on the fly and then move back
to the default when there is no work.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add two sysfs interfaces for gfx and compute:
gfx_reset_mask
compute_reset_mask
These interfaces are read-only and show the resets supported by the IP.
For example, full adapter reset (mode1/mode2/BACO/etc),
soft reset, queue reset, and pipe reset.
V2: the sysfs node returns a text string instead of some flags (Christian)
v3: add a generic helper which takes the ring as parameter
and print the strings in the order they are applied (Christian)
check amdgpu_gpu_recovery before creating sysfs file itself,
and initialize supported_reset_types in IP version files (Lijo)
v4: Fixing uninitialized variables (Tim)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make amdgpu_gfx_sysfs_init/fini functions as common entry points for all
gfx related sysfs nodes.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
compute/gfx may have multiple rings on some hardware.
In some cases, userspace wants to run jobs on a specific ring for validation purposes.
This debugfs entry helps to disable or enable submitting jobs to a specific ring.
This entry is populated only if there are at least two or more cores in the gfx/compute ip.
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <tim.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make sure KFD gets a turn when serializing access to
the GC IP. Currently non-KFD jobs can starve KFD if they
submit often enough. This patch prevents that by stalling
non-KFD if its time period has elapsed.
v2: fix units
v3: check enablement properly
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_gfx_bit_to_me_queue has been unused since it was added in
commit 7470bfcf20 ("drm/amdgpu: add helper function for gfx queue/bitmap
transition")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces the Enforce Isolation Handler designed to enforce
shader isolation on AMD GPUs, which helps to prevent data leakage
between different processes.
The handler counts the number of emitted fences for each GFX and compute
ring. If there are any fences, it schedules the `enforce_isolation_work`
to be run after a delay of `GFX_SLICE_PERIOD`. If there are no fences,
it signals the Kernel Fusion Driver (KFD) to resume the runqueue.
The function is synchronized using the `enforce_isolation_mutex`.
This commit also introduces a reference count mechanism
(kfd_sch_req_count) to keep track of the number of requests to enable
the KFD scheduler. When a request to enable the KFD scheduler is made,
the reference count is decremented. When the reference count reaches
zero, a delayed work is scheduled to enforce isolation after a delay of
GFX_SLICE_PERIOD.
When a request to disable the KFD scheduler is made, the function first
checks if the reference count is zero. If it is, it cancels the delayed
work for enforcing isolation and checks if the KFD scheduler is active.
If the KFD scheduler is active, it sends a request to stop the KFD
scheduler and sets the KFD scheduler state to inactive. Then, it
increments the reference count.
The function is synchronized using the kfd_sch_mutex to ensure that the
KFD scheduler state and reference count are updated atomically.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a new sysfs attribute 'enforce_isolation' to control
the 'enforce_isolation' setting per GPU. The attribute can be read and
written, and accepts values 0 (disabled) and 1 (enabled).
When 'enforce_isolation' is enabled, reserved VMIDs are allocated for
each ring. When it's disabled, the reserved VMIDs are freed.
The set function locks a mutex before changing the 'enforce_isolation'
flag and the VMIDs, and unlocks it afterwards. This ensures that these
operations are atomic and prevents race conditions and other concurrency
issues.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The cleaner shader is used by the CP firmware to clean LDS and GPRs
between processes on the CUs.
This adds an internal API for GFX IP code to allocate and initialize the
cleaner shader.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
This will be used in more places in the future so
add a mutex.
Acked-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SOCs with GFX v9.4.3, a VF may have multiple compute partitions.
Fetch the partition information during init and initialize partition
nodes. There is no support to switch partition mode in VF mode, hence
disable the same.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename the variable ip_dump_cp_queues to ip_dump_compute_queue
as it represent compute queues.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add gfx queue register for all instances in devcoredump
for gfx10.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support to dump registers of all instances of
cp queue registers of gfx10 to devcoredump.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename the memory pointer from ip_dump to ip_dump_core
to make it specific to core registers and rest other
registers to be dumped in their respective memories.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This code cannot be reached: return "UNKNOWN";.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
reg_count is not used and the register count is
directly derived from the array size and hence
removed.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adding gfx10 gc registers to be used for register
dump via devcoredump during a gpu reset.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace it with related interface in gfxhub functions.
v2: replace node id with xcc id.
get node id for query_utcl2_poison_status
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop redundant parameters in function amdgpu_gfx_kiq_init_ring
to simplify the code
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_kiq_wreg/rreg is hardcoded to use MEC engine 0.
Add an xcc_id parameter to amdgpu_kiq_wreg/rreg, define W/RREG32_XCC
and amdgpu_device_xcc_wreg/rreg to use the new xcc_id parameter.
Using amdgpu_sriov_runtime to determine whether to access via kiq or
RLC is sufficient for now.
v5: add condition in amdgpu_device_xcc_w/rreg, remove trace func call
v4: avoid using amdgpu_sriov_w/rreg
v3: use W/RREG32_XCC to handle non-kiq case
v2: define amdgpu_device_xcc_wreg/rreg instead of changing parameters
of amdgpu_device_wreg/rreg
Signed-off-by: Victor Lu <victorchengchi.lu@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move definition of package type to amdgpu_smuio header and add new
package types for CEM and OAM.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename KGD_MAX_QUEUES to AMDGPU_MAX_QUEUES to conform with
the naming convention followed in amdgpu_gfx.h. No functional
change.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we store CU info only for a single XCC assuming
that it is the same for all XCCs. However, that may not be
true. As a result, store CU info for all XCCs. This info is
later used for CU masking.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Several new fields are exposed in gc_info v2_1
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
So we can selectively enable it on certain devices. No
intended functional change.
Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add common GFX RAS definitions.
v2: remove instance from amdgpu_gfx_ras_reg_entry,
amdgpu_ras_err_status_reg_entry has already defined it.
v3: remove memory id definitions from amdgpu_gfx.h, they are
related to IP version.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The common function can help reduce redundant code.
v2: remove xcp operation, only need to do RAS operations for all
instances.
v3: remove check for GFX RAS support, will be checked in higher level.
add amdgpu prefix for the function name.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep a helper function to get description of compute partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When auto mode is specified, driver will choose the right compute
partition mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GMC block handles memory related information, it makes more sense to
keep memory partition functions in gmc block.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The AMDGPU_GFXHUB was bind to each xcc in the logical order.
Thus convert the node_id to logical xcc_id to index the
correct AMDGPU_GFXHUB. And "node_id / 4" can get the correct
AMDGPU_MMHUB0 index.
Signed-off-by: Le Ma <le.ma@amd.com>
Tested-by: Asad kamal <asad.kamal@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GFXv9.4.3, use SOC level partition switch implementation rather than
keeping them at GFX IP level. Change the exisiting implementation in
GFX IP for keeping partition mode and restrict it to only GFX related
switch.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Switching the partition mode configuration of ASIC is SOC
level function rather than something at GFX core level. Add
partition mode switch functions as SOC specific callbacks.
Implement the XCP manager callbacks needed for partition
switch for GC 9.4.3 based ASICs.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Within a device, an accelerator core partition can be constituted with
different IP instances. These partitions are spatial in nature. Number
of partitions which can exist at the same time depends on the 'partition
mode'. Add a manager entity which is responsible for switching between
different partition modes and maintaining partitions. It is also
responsible for suspend/resume of different partitions.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For driver de-init like rmmod operations those partition specific
attributes need to be removed accordingly.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
