This driver is used to control the PCIe M.2 connectors of different
Mechanical Keys attached to the host machines and supporting different
interfaces like PCIe/SATA, USB/UART etc...
Currently, this driver supports only the Mechanical Key M connectors with
PCIe interface. The driver also only supports driving the mandatory 3.3v
and optional 1.8v power supplies. The optional signals of the Key M
connectors are not currently supported.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260122-pci-m2-v6-4-575da9f97239@oss.qualcomm.com
[Bartosz: rename pwrseq_pcie_m2_free_resources() to pwrseq_pcie_m2_free_regulators()]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Add support for the MAX22007 4 channel DAC that drives a voltage or
current output on each channel.
Signed-off-by: Janani Sunil <janani.sunil@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and wireless.
Pretty big, but hard to make up any cohesive story that would explain
it, a random collection of fixes. The two reverts of bad patches from
this release here feel like stuff that'd normally show up by rc5 or
rc6. Perhaps obvious thing to say, given the holiday timing.
That said, no active investigations / regressions. Let's see what the
next week brings.
Current release - fix to a fix:
- can: alloc_candev_mqs(): add missing default CAN capabilities
Current release - regressions:
- usbnet: fix crash due to missing BQL accounting after resume
- Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not ...
Previous releases - regressions:
- Revert "nfc/nci: Add the inconsistency check between the input ...
Previous releases - always broken:
- number of driver fixes for incorrect use of seqlocks on stats
- rxrpc: fix recvmsg() unconditional requeue, don't corrupt rcv queue
when MSG_PEEK was set
- ipvlan: make the addrs_lock be per port avoid races in the port
hash table
- sched: enforce that teql can only be used as root qdisc
- virtio: coalesce only linear skb
- wifi: ath12k: fix dead lock while flushing management frames
- eth: igc: reduce TSN TX packet buffer from 7KB to 5KB per queue"
* tag 'net-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (96 commits)
Octeontx2-af: Add proper checks for fwdata
dpll: Prevent duplicate registrations
net/sched: act_ife: avoid possible NULL deref
hinic3: Fix netif_queue_set_napi queue_index input parameter error
vsock/test: add stream TX credit bounds test
vsock/virtio: cap TX credit to local buffer size
vsock/test: fix seqpacket message bounds test
vsock/virtio: fix potential underflow in virtio_transport_get_credit()
net: fec: account for VLAN header in frame length calculations
net: openvswitch: fix data race in ovs_vport_get_upcall_stats
octeontx2-af: Fix error handling
net: pcs: pcs-mtk-lynxi: report in-band capability for 2500Base-X
rxrpc: Fix data-race warning and potential load/store tearing
net: dsa: fix off-by-one in maximum bridge ID determination
net: bcmasp: Fix network filter wake for asp-3.0
bonding: provide a net pointer to __skb_flow_dissect()
selftests: net: amt: wait longer for connection before sending packets
be2net: Fix NULL pointer dereference in be_cmd_get_mac_from_list
Revert "net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning"
netrom: fix double-free in nr_route_frame()
...
Several partition node bindings are just a compatible plus properties
defined in partition.yaml. Move all of these bindings to a single schema
file.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Pull SoC fixes from Arnd Bergmann:
"The main changes are devicetree updates for qualcomm and rockchips
arm64 platforms, fixing minor mistakes in SoC and board specific
settings:
- GPIO settings for Pinephone Pro buttons
- Register ranges for rk3576 GPU
- Power domains on sc8280xp
- Clocks on qcom talos
- dtc warnings for extraneous properties, nonstandard node names and
undocument identifiers
The Tegra210 platform gets a single revert for a devicetree change
that caused a 6.19 regression.
On 32-bit Arm, we have trivial fixes for Microchip SAMA7 devicetree
files and NPCM Kconfig, as well as Andrew Jeffery being officially
listed as MAINTAINER for NPCM.
A single driver fix is for Qualcomm RPMHD power domains, bringing the
driver up to date with a devicetree change that added additional power
domains to be enabled"
* tag 'soc-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (27 commits)
MAINTAINERS: Add Andrew as M: to ARM/NUVOTON NPCM ARCHITECTURE
MAINTAINERS: update email address for Yixun Lan
Revert "arm64: tegra: Add interconnect properties for Tegra210"
arm64: dts: rockchip: Drop unsupported properties
arm64: dts: rockchip: Fix gpio pinctrl node names
arm64: dts: rockchip: Fix pinctrl property typo on rk3326-odroid-go3
arm64: dts: rockchip: Drop "sitronix,st7789v" fallback compatible from rk3568-wolfvision
ARM: dts: microchip: sama7d65: fix size-cells property for i2c3
ARM: dts: microchip: sama7d65: fix the ranges property for flx9
arm: npcm: drop unused Kconfig ERRATA symbol
arm64: dts: rockchip: Fix wrong register range of rk3576 gpu
arm64: dts: rockchip: Configure MCLK for analog sound on NanoPi M5
arm64: dts: rockchip: Fix headphones widget name on NanoPi M5
ARM: dts: microchip: lan966x: Fix the access to the PHYs for pcb8290
arm64: dts: rockchip: remove redundant max-link-speed from nanopi-r4s
arm64: dts: rockchip: remove dangerous max-link-speed from helios64
arm64: dts: rockchip: fix unit-address for RK3588 NPU's core1 and core2's IOMMU
arm64: dts: rockchip: Fix wifi interrupts flag on Sakura Pi RK3308B
arm64: dts: qcom: sm8650: Fix compile warnings in USB controller node
arm64: dts: qcom: sm8550: Fix compile warnings in USB controller node
...
OP-TEE update for 6.20
- A micro optimization by making a local array static const
- Update OP-TEE mailing list as moderated
- Update an outdated comment for cmd_alloc_suppl()
* tag 'optee-update-for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee:
optee: make read-only array attr static const
MAINTAINERS: Mark the OP-TEE mailing list moderated
optee: update outdated comment
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add the new mssio driver and bindings to the existing entry
for Microchip RISC-V devices.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
There's three of these drivers now for the same platforms, move them
together with other microchip drivers to follow.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
The Synopsys DesignWare MIPI CSI-2 Receiver is a CSI-2 bridge with
one input port and one output port. It receives the data with the
help of an external MIPI PHY (C-PHY or D-PHY) and passes it to e.g.,
the Rockchip Video Capture (VICAP) block on recent Rockchip SoCs.
Add a V4L2 subdevice driver for this unit.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
[Sakari Ailus: Make sparse and smatch happy.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
HIPPI has not been relevant for over two decades. It was rapidly
eclipsed by Fibre Channel, and even when it was new, it was
confined to very high-end hardware. The HIPPI code has only
received tree-wide changes and fixes by inspection in the entire
Git history. Remove HIPPI support and the rrunner HIPPI driver,
and move the former maintainer to the CREDITS file. Keep the
include/uapi/linux/if_hippi.h header because it is used by the TUN
code, and to avoid breaking userspace, however unlikely that may be.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260119022451.22344-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NFC stack in Linux is in poor shape, with several bugs being discovered
last years via fuzzing, not much new development happening and limited
review and testing. It requires some more effort than drive-by reviews
I have been offering last one or two years.
I don't have much time nor business interests to keep looking at NFC,
so let's drop me from the maintainers to clearly indicate that more
hands are needed.
Acked-by: Mark Greer <mgreer@animalcreek.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260118094822.10126-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge Linux 6.19-rc1 in order to catch up with other changes (e.g. UBWC
config database defining UBWC_6).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Merge series from Abdurrahman Hussain <abdurrahman@nexthop.ai>:
Additionally, make interrupts optional to allow the driver to fall back
to its existing polling mode on systems where interrupts are either missing
or broken.
Pull pwm fixes and a maintainer update from Uwe Kleine-König:
- pwm: Ensure ioctl() returns a negative errno on error
This affects two ioctls on /dev/pwmchipX where the return value of
copy_to_user() was passed to userspace. This is fixed to return
-EFAULT now instead.
- pwm: max7360: Populate missing .sizeof_wfhw in max7360_pwm_ops
This fixes an oversight in the original commit that added support for
the max7360 driver (d93a75d94b: "pwm: max7360: Add MAX7360 PWM
support"). There is no user-visible effect because the .sizeof_wfhw
member is just a safe guard that the memory provided by the core is
big enough. While it currently is big enough and there is no reason
to assume that will change, doing that correctly is necessary.
- MAINTAINERS: Add Michal Wilczynski as reviewer for PWM rust drivers
Michal cares for the Rust parts of the pwm subsystem. Several of the
patches sent recently for the (for now) only Rust pwm driver did not
add Michal to Cc which resulted in the patches waiting for review as
I thought Michal would care but he wasn't aware of them.
* tag 'pwm/for-6.19-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
MAINTAINERS: Add myself as reviewer for PWM rust drivers
pwm: max7360: Populate missing .sizeof_wfhw in max7360_pwm_ops
pwm: Ensure ioctl() returns a negative errno on error
Commit
693c819fed ("x86/entry/vdso: Refactor the vdso build")
moves the vdso sources into common, vdso32, and vdso64 subdirectories, but
misses to adjust the file entry in the INTEL SGX section of the MAINTAINERS
file.
Adjust the file entry in accordance with the file movement of the commit
above.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260119093835.114554-1-lukas.bulwahn@redhat.com
Convert NVIDIA Tegra NAND Flash Controller binding to YAML format.
Changes during Conversion:
- Define new properties `power-domains` and `operating-points-v2`
because the existing in tree DTS uses them.
- Modify MAINTAINERS references to point the created YAML file.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This will be used by the Tyr driver to create and modify the page table
of each address space on the GPU. Each time a mapping gets created or
removed by userspace, Tyr will call into GPUVM, which will figure out
which calls to map_pages and unmap_pages are required to map the data in
question in the page table so that the GPU may access those pages when
using that address space.
The Rust type wraps the struct using a raw pointer rather than the usual
Opaque+ARef approach because Opaque+ARef requires the target type to be
refcounted.
Signed-off-by: Asahi Lina <lina+kernel@asahilina.net>
Acked-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Tested-by: Deborah Brouwer <deborah.brouwer@collabora.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
[joro: Fixed up Rust import style]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Pull cgroup fixes from Tejun Heo:
- Add Chen Ridong as cpuset reviewer
- Add SPDX license identifiers to cgroup files that were missing them
* tag 'cgroup-for-6.19-rc5-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
kernel: cgroup: Add LGPL-2.1 SPDX license ID to legacy_freezer.c
kernel: cgroup: Add SPDX-License-Identifier lines
MAINTAINERS: Add Chen Ridong as cpuset reviewer
A lot of SoC series end up getting CCed to the hardening list due to
their mention of "pstore" in device tree or similar, and this noise isn't
worth making sure I don't lose pstore patches by having them show up in
the hardening patchwork. ;) I can use better email filters instead!
Link: https://patch.msgid.link/20260116005631.work.387-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Gary has been involved in pin-init since the very beginning. He created
his own version before I even joined Rust-for-Linux, contributed ideas
to my solution, and reviewed it. With the removal of the declarative
macro mess, he is also going to be a maintainer of pin-init.
Acked-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Benno Lossin <lossin@kernel.org>
Pull power management fixes from Rafael Wysocki:
"These fix an error path memory leak in the energy model management
code, fix a kerneldoc comment in it, and fix and revamp the energy
model YNL specification added recently along with the new energy model
management netlink interface (that received feedback after being
added):
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)"
* tag 'pm-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
Convert NVIDIA Tegra NAND Flash Controller binding to YAML format.
Changes during Conversion:
- Define new properties `power-domains` and `operating-points-v2`
because the existing in tree DTS uses them.
- Modify MAINTAINERS references to point the created YAML file.
Signed-off-by: Charan Pedumuru <charan.pedumuru@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add kselftest cases for the revocable API.
The test consists of three parts:
- A kernel module (revocable_test.ko) that creates a debugfs interface
with `/provider` and `/consumer` files.
- A user-space C program (revocable_test) that uses the kselftest
harness to interact with the debugfs files.
- An orchestrating shell script (test-revocable.sh) that loads the
module, runs the C program, and unloads the module.
The test cases cover the following scenarios:
- Basic: Verifies that a consumer can successfully access the resource
provided via the provider.
- Revocation: Verifies that after the provider revokes the resource,
the consumer correctly receives a NULL pointer on a subsequent access.
- Try Access Macro: Same as "Revocation" but uses the
REVOCABLE_TRY_ACCESS_WITH() and REVOCABLE_TRY_ACCESS_SCOPED().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260116080235.350305-4-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add Kunit test cases for the revocable API.
The test cases cover the following scenarios:
- Basic: Verifies that a consumer can successfully access the resource
provided via the provider.
- Revocation: Verifies that after the provider revokes the resource,
the consumer correctly receives a NULL pointer on a subsequent access.
- Try Access Macro: Same as "Revocation" but uses the
REVOCABLE_TRY_ACCESS_WITH() and REVOCABLE_TRY_ACCESS_SCOPED().
A way to run the test:
$ ./tools/testing/kunit/kunit.py run \
--kconfig_add CONFIG_REVOCABLE_KUNIT_TEST=y \
revocable_test
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260116080235.350305-3-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some resources can be removed asynchronously, for example, resources
provided by a hot-pluggable device like USB. When holding a reference
to such a resource, it's possible for the resource to be removed and
its memory freed, leading to use-after-free errors on subsequent access.
The "revocable" mechanism addresses this by establishing a weak reference
to a resource that might be freed at any time. It allows a resource
consumer to safely attempt to access the resource, guaranteeing that the
access is valid for the duration of its use, or it fails safely if the
resource has already been revoked.
The implementation uses a provider/consumer model built on Sleepable
RCU (SRCU) to guarantee safe memory access:
- A resource provider, such as a driver for a hot-pluggable device,
allocates a struct revocable_provider and initializes it with a pointer
to the resource.
- A resource consumer that wants to access the resource allocates a
struct revocable which acts as a handle containing a reference to the
provider.
- To access the resource, the consumer uses revocable_try_access().
This function enters an SRCU read-side critical section and returns
the pointer to the resource. If the provider has already freed the
resource, it returns NULL. After use, the consumer calls
revocable_withdraw_access() to exit the SRCU critical section. The
REVOCABLE_TRY_ACCESS_WITH() and REVOCABLE_TRY_ACCESS_SCOPED() are
convenient helpers for doing that.
- When the provider needs to remove the resource, it calls
revocable_provider_revoke(). This function sets the internal resource
pointer to NULL and then calls synchronize_srcu() to wait for all
current readers to finish before the resource can be completely torn
down.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://patch.msgid.link/20260116080235.350305-2-tzungbi@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge fixes related to the energy model management for 6.19-rc6:
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)
* pm-em:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
Move Rui Miguel Silva to reviewer since he does not have sufficient time to
maintain i.MX7/8 media drivers. Frank Li has the hardware, complete
documentation, and has participated actively in patch review. Promote him
as the i.MX7/8 media drivers maintainer.
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
interconnect fixes for v6.19-rc
This contains a few small fixes for the current cycle.
- dt-bindings: interconnect: qcom,sa8775p-rpmh: Fix incorrectly added reg and clocks
- MAINTAINERS: Add interconnect-clk.h to interconnect API entry
- interconnect: debugfs: initialize src_node and dst_node to empty strings
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.19-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: debugfs: initialize src_node and dst_node to empty strings
MAINTAINERS: Add interconnect-clk.h to interconnect API entry
dt-bindings: interconnect: qcom,sa8775p-rpmh: Fix incorrectly added reg and clocks
After sending a patch to op-tee@lists.trustedfirmware.org, I got the
typical response for a moderated list:
Your mail to 'op-tee@lists.trustedfirmware.org' with the subject
[...]
Is being held until the list moderator can review it for approval.
The message is being held because:
The message is not from a list member
Either the message will get posted to the list, or you will receive
notification of the moderator's decision.
Mark this mailing list moderated in MAINTAINERS.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Vinod Koul says:
====================
phy common properties
Introduce "rx-polarity" and "tx-polarity" device tree properties
with Kunit tests (from Vladimir Oltean).
* tag 'phy_common_properties' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: add phy_get_rx_polarity() and phy_get_tx_polarity()
dt-bindings: phy-common-props: RX and TX lane polarity inversion
dt-bindings: phy-common-props: ensure protocol-names are unique
dt-bindings: phy-common-props: create a reusable "protocol-names" definition
dt-bindings: phy: rename transmit-amplitude.yaml to phy-common-props.yaml
====================
Link: https://patch.msgid.link/aWeXvFcGNK5T6As9@vaman
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RGMU a.k.a Reduced Graphics Management Unit is a small state machine
with the sole purpose of providing IFPC (Inter Frame Power Collapse)
support. Compared to GMU, it doesn't manage GPU clock, voltage
scaling, bw voting or any other functionalities. All it does is detect
an idle GPU and toggle the GDSC switch. As it doesn't access DDR space,
it doesn't require iommu.
So far, only Adreno 612 GPU has an RGMU core. Document it in
qcom,adreno-rgmu.yaml.
Signed-off-by: Jie Zhang <jie.zhang@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/696679/
Message-ID: <20251231-qcs615-spin-2-v6-4-da87debf6883@oss.qualcomm.com>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Pull EFI fixes from Ard Biesheuvel:
- Wipe the INITRD config table upon consumption so it doesn't confuse
kexec
- Let APEI/GHES maintainers take responsibility for CPER processing
logic
- Fix wrong return value in CPER string helper routine
* tag 'efi-fixes-for-v6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/cper: Fix cper_bits_to_str buffer handling and return value
MAINTAINERS: add cper to APEI files
efi: Wipe INITRD config table from memory after consumption
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, can and IPsec.
Current release - regressions:
- net: add net.core.qdisc_max_burst
- can: propagate CAN device capabilities via ml_priv
Previous releases - regressions:
- dst: fix races in rt6_uncached_list_del() and
rt_del_uncached_list()
- ipv6: fix use-after-free in inet6_addr_del().
- xfrm: fix inner mode lookup in tunnel mode GSO segmentation
- ip_tunnel: spread netdev_lockdep_set_classes()
- ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()
- bluetooth: hci_sync: enable PA sync lost event
- eth: virtio-net:
- fix the deadlock when disabling rx NAPI
- fix misalignment bug in struct virtnet_info
Previous releases - always broken:
- ipv4: ip_gre: make ipgre_header() robust
- can: fix SSP_SRC in cases when bit-rate is higher than 1 MBit.
- eth:
- mlx5e: profile change fix
- octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
- macvlan: fix possible UAF in macvlan_forward_source()"
* tag 'net-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
virtio_net: Fix misalignment bug in struct virtnet_info
net: can: j1939: j1939_xtp_rx_rts_session_active(): deactivate session upon receiving the second rts
can: raw: instantly reject disabled CAN frames
can: propagate CAN device capabilities via ml_priv
Revert "can: raw: instantly reject unsupported CAN frames"
net/sched: sch_qfq: do not free existing class in qfq_change_class()
selftests: drv-net: fix RPS mask handling for high CPU numbers
selftests: drv-net: fix RPS mask handling in toeplitz test
ipv6: Fix use-after-free in inet6_addr_del().
dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list()
net: hv_netvsc: reject RSS hash key programming without RX indirection table
tools: ynl: render event op docs correctly
net: add net.core.qdisc_max_burst
net: airoha: Fix typo in airoha_ppe_setup_tc_block_cb definition
net: phy: motorcomm: fix duplex setting error for phy leds
net: octeon_ep_vf: fix free_irq dev_id mismatch in IRQ rollback
net/mlx5e: Restore destroying state bit after profile cleanup
net/mlx5e: Pass netdev to mlx5e_destroy_netdev instead of priv
net/mlx5e: Don't store mlx5e_priv in mlx5e_dev devlink priv
net/mlx5e: Fix crash on profile change rollback failure
...
