remoteproc: k3-dsp: Acquire mailbox handle during probe routine

Acquire the mailbox handle during device probe and do not release handle
in stop/detach routine or error paths. This removes the redundant
requests for mbox handle later during rproc start/attach. This also
allows to defer remoteproc driver's probe if mailbox is not probed yet.

Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240808074127.2688131-4-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>

drivers/remoteproc/ti_k3_dsp_remoteproc.c

@@ -115,6 +115,10 @@ static void k3_dsp_rproc_mbox_callback(struct mbox_client *client, void *data)
 	const char *name = kproc->rproc->name;
 	u32 msg = omap_mbox_message(data);
 
+	/* Do not forward messages from a detached core */
+	if (kproc->rproc->state == RPROC_DETACHED)
+		return;
+
 	dev_dbg(dev, "mbox msg: 0x%x\n", msg);
 
 	switch (msg) {
@@ -155,6 +159,10 @@ static void k3_dsp_rproc_kick(struct rproc *rproc, int vqid)
 	mbox_msg_t msg = (mbox_msg_t)vqid;
 	int ret;
 
+	/* Do not forward messages to a detached core */
+	if (kproc->rproc->state == RPROC_DETACHED)
+		return;
+
 	/* send the index of the triggered virtqueue in the mailbox payload */
 	ret = mbox_send_message(kproc->mbox, (void *)msg);
 	if (ret < 0)
@@ -230,12 +238,9 @@ static int k3_dsp_rproc_request_mbox(struct rproc *rproc)
 	client->knows_txdone = false;
 
 	kproc->mbox = mbox_request_channel(client, 0);
-	if (IS_ERR(kproc->mbox)) {
+	if (IS_ERR(kproc->mbox))
-		ret = -EBUSY;
+		return dev_err_probe(dev, PTR_ERR(kproc->mbox),
-		dev_err(dev, "mbox_request_channel failed: %ld\n",
+				     "mbox_request_channel failed\n");
-			PTR_ERR(kproc->mbox));
-		return ret;
-	}
 
 	/*
 	 * Ping the remote processor, this is only for sanity-sake for now;
@@ -315,32 +320,23 @@ static int k3_dsp_rproc_start(struct rproc *rproc)
 	u32 boot_addr;
 	int ret;
 
-	ret = k3_dsp_rproc_request_mbox(rproc);
-	if (ret)
-		return ret;
-
 	boot_addr = rproc->bootaddr;
 	if (boot_addr & (kproc->data->boot_align_addr - 1)) {
 		dev_err(dev, "invalid boot address 0x%x, must be aligned on a 0x%x boundary\n",
 			boot_addr, kproc->data->boot_align_addr);
-		ret = -EINVAL;
+		return -EINVAL;
-		goto put_mbox;
 	}
 
 	dev_dbg(dev, "booting DSP core using boot addr = 0x%x\n", boot_addr);
 	ret = ti_sci_proc_set_config(kproc->tsp, boot_addr, 0, 0);
 	if (ret)
-		goto put_mbox;
+		return ret;
 
 	ret = k3_dsp_rproc_release(kproc);
 	if (ret)
-		goto put_mbox;
+		return ret;
 
 	return 0;
-
-put_mbox:
-	mbox_free_channel(kproc->mbox);
-	return ret;
 }
 
 /*
@@ -353,8 +349,6 @@ static int k3_dsp_rproc_stop(struct rproc *rproc)
 {
 	struct k3_dsp_rproc *kproc = rproc->priv;
 
-	mbox_free_channel(kproc->mbox);
-
 	k3_dsp_rproc_reset(kproc);
 
 	return 0;
@@ -363,42 +357,22 @@ static int k3_dsp_rproc_stop(struct rproc *rproc)
 /*
  * Attach to a running DSP remote processor (IPC-only mode)
  *
- * This rproc attach callback only needs to request the mailbox, the remote
+ * This rproc attach callback is a NOP. The remote processor is already booted,
- * processor is already booted, so there is no need to issue any TI-SCI
+ * and all required resources have been acquired during probe routine, so there
- * commands to boot the DSP core. This callback is invoked only in IPC-only
+ * is no need to issue any TI-SCI commands to boot the DSP core. This callback
- * mode.
+ * is invoked only in IPC-only mode and exists because rproc_validate() checks
+ * for its existence.
  */
-static int k3_dsp_rproc_attach(struct rproc *rproc)
+static int k3_dsp_rproc_attach(struct rproc *rproc) { return 0; }
-{
-	struct k3_dsp_rproc *kproc = rproc->priv;
-	struct device *dev = kproc->dev;
-	int ret;
-
-	ret = k3_dsp_rproc_request_mbox(rproc);
-	if (ret)
-		return ret;
-
-	dev_info(dev, "DSP initialized in IPC-only mode\n");
-	return 0;
-}
 
 /*
  * Detach from a running DSP remote processor (IPC-only mode)
  *
- * This rproc detach callback performs the opposite operation to attach callback
+ * This rproc detach callback is a NOP. The DSP core is not stopped and will be
- * and only needs to release the mailbox, the DSP core is not stopped and will
+ * left to continue to run its booted firmware. This callback is invoked only in
- * be left to continue to run its booted firmware. This callback is invoked only
+ * IPC-only mode and exists for sanity sake.
- * in IPC-only mode.
  */
-static int k3_dsp_rproc_detach(struct rproc *rproc)
+static int k3_dsp_rproc_detach(struct rproc *rproc) { return 0; }
-{
-	struct k3_dsp_rproc *kproc = rproc->priv;
-	struct device *dev = kproc->dev;
-
-	mbox_free_channel(kproc->mbox);
-	dev_info(dev, "DSP deinitialized in IPC-only mode\n");
-	return 0;
-}
 
 /*
  * This function implements the .get_loaded_rsc_table() callback and is used
@@ -697,6 +671,10 @@ static int k3_dsp_rproc_probe(struct platform_device *pdev)
 	kproc->dev = dev;
 	kproc->data = data;
 
+	ret = k3_dsp_rproc_request_mbox(rproc);
+	if (ret)
+		return ret;
+
 	kproc->ti_sci = devm_ti_sci_get_by_phandle(dev, "ti,sci");
 	if (IS_ERR(kproc->ti_sci))
 		return dev_err_probe(dev, PTR_ERR(kproc->ti_sci),
@@ -789,6 +767,8 @@ static void k3_dsp_rproc_remove(struct platform_device *pdev)
 		if (ret)
 			dev_err(dev, "failed to detach proc (%pe)\n", ERR_PTR(ret));
 	}
+
+	mbox_free_channel(kproc->mbox);
 }
 
 static const struct k3_dsp_mem_data c66_mems[] = {