From 8aa6f7697f5981d336cac7af6ddd182a03c6da01 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Thu, 22 Jan 2026 18:20:12 +0100 Subject: [PATCH 1/5] pmdomain: qcom: rpmpd: fix off-by-one error in clamping to the highest state As it is indicated by the comment, the rpmpd_aggregate_corner() function tries to clamp the state to the highest corner/level supported by the given power domain, however the calculation of the highest state contains an off-by-one error. The 'max_state' member of the 'rpmpd' structure indicates the highest corner/level, and as such it does not needs to be decremented. Change the code to use the 'max_state' value directly to avoid the error. Fixes: 98c8b3efacae ("soc: qcom: rpmpd: Add sync_state") Signed-off-by: Gabor Juhos Reviewed-by: Konrad Dybcio Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/pmdomain/qcom/rpmpd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pmdomain/qcom/rpmpd.c b/drivers/pmdomain/qcom/rpmpd.c index f8580ec0f737..98ab4f9ea9bf 100644 --- a/drivers/pmdomain/qcom/rpmpd.c +++ b/drivers/pmdomain/qcom/rpmpd.c @@ -1001,7 +1001,7 @@ static int rpmpd_aggregate_corner(struct rpmpd *pd) /* Clamp to the highest corner/level if sync_state isn't done yet */ if (!pd->state_synced) - this_active_corner = this_sleep_corner = pd->max_state - 1; + this_active_corner = this_sleep_corner = pd->max_state; else to_active_sleep(pd, pd->corner, &this_active_corner, &this_sleep_corner); From ae0a24c5a8dcea20bf8e344eadf6593e6d1959c3 Mon Sep 17 00:00:00 2001 From: Jacky Bai Date: Fri, 23 Jan 2026 10:51:26 +0800 Subject: [PATCH 2/5] pmdomain: imx: gpcv2: Fix the imx8mm gpu hang due to wrong adb400 reset MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On i.MX8MM, the GPUMIX, GPU2D, and GPU3D blocks share a common reset domain. Due to this hardware limitation, powering off/on GPU2D or GPU3D also triggers a reset of the GPUMIX domain, including its ADB400 port. However, the ADB400 interface must always be placed into power‑down mode before being reset. Currently the GPUMIX and GPU2D/3D power domains rely on runtime PM to handle dependency ordering. In some corner cases, the GPUMIX power off sequence is skipped, leaving the ADB400 port active when GPU2D/3D reset. This causes the GPUMIX ADB400 port to be reset while still active, leading to unpredictable bus behavior and GPU hangs. To avoid this, refine the power‑domain control logic so that the GPUMIX ADB400 port is explicitly powered down and powered up as part of the GPU power domain on/off sequence. This ensures proper ordering and prevents incorrect ADB400 reset. Suggested-by: Lucas Stach Signed-off-by: Jacky Bai Reviewed-by: Lucas Stach Tested-by: Philipp Zabel Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/pmdomain/imx/gpcv2.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/drivers/pmdomain/imx/gpcv2.c b/drivers/pmdomain/imx/gpcv2.c index 105fcaf13a34..cff738e4d546 100644 --- a/drivers/pmdomain/imx/gpcv2.c +++ b/drivers/pmdomain/imx/gpcv2.c @@ -165,13 +165,11 @@ #define IMX8M_VPU_HSK_PWRDNREQN BIT(5) #define IMX8M_DISP_HSK_PWRDNREQN BIT(4) -#define IMX8MM_GPUMIX_HSK_PWRDNACKN BIT(29) -#define IMX8MM_GPU_HSK_PWRDNACKN (BIT(27) | BIT(28)) +#define IMX8MM_GPU_HSK_PWRDNACKN GENMASK(29, 27) #define IMX8MM_VPUMIX_HSK_PWRDNACKN BIT(26) #define IMX8MM_DISPMIX_HSK_PWRDNACKN BIT(25) #define IMX8MM_HSIO_HSK_PWRDNACKN (BIT(23) | BIT(24)) -#define IMX8MM_GPUMIX_HSK_PWRDNREQN BIT(11) -#define IMX8MM_GPU_HSK_PWRDNREQN (BIT(9) | BIT(10)) +#define IMX8MM_GPU_HSK_PWRDNREQN GENMASK(11, 9) #define IMX8MM_VPUMIX_HSK_PWRDNREQN BIT(8) #define IMX8MM_DISPMIX_HSK_PWRDNREQN BIT(7) #define IMX8MM_HSIO_HSK_PWRDNREQN (BIT(5) | BIT(6)) @@ -794,8 +792,6 @@ static const struct imx_pgc_domain imx8mm_pgc_domains[] = { .bits = { .pxx = IMX8MM_GPUMIX_SW_Pxx_REQ, .map = IMX8MM_GPUMIX_A53_DOMAIN, - .hskreq = IMX8MM_GPUMIX_HSK_PWRDNREQN, - .hskack = IMX8MM_GPUMIX_HSK_PWRDNACKN, }, .pgc = BIT(IMX8MM_PGC_GPUMIX), .keep_clocks = true, From 6bd8b4a92a901fae1a422e6f914801063c345e8d Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Fri, 30 Jan 2026 13:11:07 +0800 Subject: [PATCH 3/5] pmdomain: imx8m-blk-ctrl: fix out-of-range access of bc->domains Fix out-of-range access of bc->domains in imx8m_blk_ctrl_remove(). Fixes: 2684ac05a8c4 ("soc: imx: add i.MX8M blk-ctrl driver") Cc: stable@kernel.org Signed-off-by: Xu Yang Reviewed-by: Daniel Baluta Signed-off-by: Ulf Hansson --- drivers/pmdomain/imx/imx8m-blk-ctrl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pmdomain/imx/imx8m-blk-ctrl.c b/drivers/pmdomain/imx/imx8m-blk-ctrl.c index 74bf4936991d..19e992d2ee3b 100644 --- a/drivers/pmdomain/imx/imx8m-blk-ctrl.c +++ b/drivers/pmdomain/imx/imx8m-blk-ctrl.c @@ -340,7 +340,7 @@ static void imx8m_blk_ctrl_remove(struct platform_device *pdev) of_genpd_del_provider(pdev->dev.of_node); - for (i = 0; bc->onecell_data.num_domains; i++) { + for (i = 0; i < bc->onecell_data.num_domains; i++) { struct imx8m_blk_ctrl_domain *domain = &bc->domains[i]; pm_genpd_remove(&domain->genpd); From e9ab2b83893dd03cf04d98faded81190e635233f Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Wed, 4 Feb 2026 19:11:41 +0800 Subject: [PATCH 4/5] pmdomain: imx8mp-blk-ctrl: Keep gpc power domain on for system wakeup Current design will power off all dependent GPC power domains in imx8mp_blk_ctrl_suspend(), even though the user device has enabled wakeup capability. The result is that wakeup function never works for such device. An example will be USB wakeup on i.MX8MP. PHY device '382f0040.usb-phy' is attached to power domain 'hsioblk-usb-phy2' which is spawned by hsio block control. A virtual power domain device 'genpd:3:32f10000.blk-ctrl' is created to build connection with 'hsioblk-usb-phy2' and it depends on GPC power domain 'usb-otg2'. If device '382f0040.usb-phy' enable wakeup, only power domain 'hsioblk-usb-phy2' keeps on during system suspend, power domain 'usb-otg2' is off all the time. So the wakeup event can't happen. In order to further establish a connection between the power domains related to GPC and block control during system suspend, register a genpd power on/off notifier for the power_dev. This allows us to prevent the GPC power domain from being powered off, in case the block control power domain is kept on to serve system wakeup. Suggested-by: Ulf Hansson Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl") Cc: stable@vger.kernel.org Signed-off-by: Xu Yang Signed-off-by: Ulf Hansson --- drivers/pmdomain/imx/imx8mp-blk-ctrl.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) diff --git a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c index 34576be606e3..56bbfee8668d 100644 --- a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c +++ b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c @@ -65,6 +65,7 @@ struct imx8mp_blk_ctrl_domain { struct icc_bulk_data paths[DOMAIN_MAX_PATHS]; struct device *power_dev; struct imx8mp_blk_ctrl *bc; + struct notifier_block power_nb; int num_paths; int id; }; @@ -594,6 +595,20 @@ static int imx8mp_blk_ctrl_power_off(struct generic_pm_domain *genpd) return 0; } +static int imx8mp_blk_ctrl_gpc_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + struct imx8mp_blk_ctrl_domain *domain = + container_of(nb, struct imx8mp_blk_ctrl_domain, power_nb); + + if (action == GENPD_NOTIFY_PRE_OFF) { + if (domain->genpd.status == GENPD_STATE_ON) + return NOTIFY_BAD; + } + + return NOTIFY_OK; +} + static struct lock_class_key blk_ctrl_genpd_lock_class; static int imx8mp_blk_ctrl_probe(struct platform_device *pdev) @@ -698,6 +713,14 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev) goto cleanup_pds; } + domain->power_nb.notifier_call = imx8mp_blk_ctrl_gpc_notifier; + ret = dev_pm_genpd_add_notifier(domain->power_dev, &domain->power_nb); + if (ret) { + dev_err_probe(dev, ret, "failed to add power notifier\n"); + dev_pm_domain_detach(domain->power_dev, true); + goto cleanup_pds; + } + domain->genpd.name = data->name; domain->genpd.power_on = imx8mp_blk_ctrl_power_on; domain->genpd.power_off = imx8mp_blk_ctrl_power_off; @@ -707,6 +730,7 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev) ret = pm_genpd_init(&domain->genpd, NULL, true); if (ret) { dev_err_probe(dev, ret, "failed to init power domain\n"); + dev_pm_genpd_remove_notifier(domain->power_dev); dev_pm_domain_detach(domain->power_dev, true); goto cleanup_pds; } @@ -755,6 +779,7 @@ cleanup_provider: cleanup_pds: for (i--; i >= 0; i--) { pm_genpd_remove(&bc->domains[i].genpd); + dev_pm_genpd_remove_notifier(bc->domains[i].power_dev); dev_pm_domain_detach(bc->domains[i].power_dev, true); } @@ -774,6 +799,7 @@ static void imx8mp_blk_ctrl_remove(struct platform_device *pdev) struct imx8mp_blk_ctrl_domain *domain = &bc->domains[i]; pm_genpd_remove(&domain->genpd); + dev_pm_genpd_remove_notifier(domain->power_dev); dev_pm_domain_detach(domain->power_dev, true); } From e2c4c5b2bbd4f688a0f9f6da26cdf6d723c53478 Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Wed, 4 Feb 2026 19:11:42 +0800 Subject: [PATCH 5/5] pmdomain: imx8mp-blk-ctrl: Keep usb phy power domain on for system wakeup USB system wakeup need its PHY on, so add the GENPD_FLAG_ACTIVE_WAKEUP flags to USB PHY genpd configuration. Signed-off-by: Xu Yang Fixes: 556f5cf9568a ("soc: imx: add i.MX8MP HSIO blk-ctrl") Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson --- drivers/pmdomain/imx/imx8mp-blk-ctrl.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c index 56bbfee8668d..8fc79f9723f0 100644 --- a/drivers/pmdomain/imx/imx8mp-blk-ctrl.c +++ b/drivers/pmdomain/imx/imx8mp-blk-ctrl.c @@ -53,6 +53,7 @@ struct imx8mp_blk_ctrl_domain_data { const char * const *path_names; int num_paths; const char *gpc_name; + const unsigned int flags; }; #define DOMAIN_MAX_CLKS 3 @@ -265,10 +266,12 @@ static const struct imx8mp_blk_ctrl_domain_data imx8mp_hsio_domain_data[] = { [IMX8MP_HSIOBLK_PD_USB_PHY1] = { .name = "hsioblk-usb-phy1", .gpc_name = "usb-phy1", + .flags = GENPD_FLAG_ACTIVE_WAKEUP, }, [IMX8MP_HSIOBLK_PD_USB_PHY2] = { .name = "hsioblk-usb-phy2", .gpc_name = "usb-phy2", + .flags = GENPD_FLAG_ACTIVE_WAKEUP, }, [IMX8MP_HSIOBLK_PD_PCIE] = { .name = "hsioblk-pcie", @@ -724,6 +727,7 @@ static int imx8mp_blk_ctrl_probe(struct platform_device *pdev) domain->genpd.name = data->name; domain->genpd.power_on = imx8mp_blk_ctrl_power_on; domain->genpd.power_off = imx8mp_blk_ctrl_power_off; + domain->genpd.flags = data->flags; domain->bc = bc; domain->id = i;